TY - JOUR A1 - Gersonde, Martin A1 - Becker, Günther T1 - Aufnahme, Eindringstiefe und quantitative Verteilung eines Chrom-Flour-Arsen-Schutzsalzgemisches in Fichten- und Kiefermasten nach Kesseldruckverfahren N2 - Anlaß und Aufgabe der Untersuchungen — Versuchsausführung: Holzauswahl; Tränkung, Verwiegen; Lagerung der getränkten Maste; Probenentnahme; Bestimmung der Fluorid-Eindringtiefen; Bestimmung des Schutzsalz-Gehaltes und seiner Verteilung; Statistische Auswertungsverfahren — Aufnahme an Schutzsalz-Lösung — Fluorid-Eindringtiefe : Fichte; Kiefer — Mengen-Verteilung von Fluor und Chrom: Fichte; Kiefer — Folgerungen aus den Ergebnissen: Einfluß von Holzart und Holzeigenschaften; Bemerkungen zum Tränkerfolg; Gesichtspunkte für eine Gütekontrolle — Zusammenfassung — Schrifttum. PY - 1965 SN - 0018-3768 VL - 23 IS - 9 SP - 369 EP - 381 PB - Springer CY - Berlin AN - OPUS4-10428 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Günther A1 - Gersonde, Martin T1 - Preservation of Wood-based Panels against Fungi and Insects and Testing its Efficiency T2 - World Consultation on Wood-based Panels CY - New Delhi, India DA - 1975-02-06 PY - 1976 SN - 0018-3849 VL - 28 IS - 1 SP - 12 EP - 15 PB - Österreich. Agrarverl. CY - Wien AN - OPUS4-8469 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Günther A1 - Gersonde, Martin T1 - Ergebnisse vergleichender Untersuchungen über den Nachschutz von Holzmasten mit Salzen PY - 1960 SN - 0013-5496 VL - 59 IS - 24 SP - 854 EP - 864 PB - VWEW-Energieverl. CY - Frankfurt, M. AN - OPUS4-7863 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Günther A1 - Gersonde, Martin T1 - Preservation of Wood-Based Panels against Fungi and Insects and Testing its Efficiency T2 - World Consultation on Wood Based Panels (background paper) CY - New Delhi, India DA - 1975-02-06 PY - 1975 IS - 114 SP - i-iii, 1-11 CY - New Delhi, India AN - OPUS4-8271 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Günther, U. A1 - Ballheimer, Viktor A1 - Linnemann, Konrad A1 - Wille, Frank A1 - Droste, Bernhard T1 - Experiences by German authority with safety case approach for welding seams as part of SNF transport package containments N2 - Federal Institute for Materials Research and Testing (BAM) is the responsible authority for the assessment of mechanical and thermal safety as well as quality issues within the licensing procedure for transport casks for radioactive materials. The assessment includes a brittle fracture analysis of all relevant cask components. For cask bodies where a steel bottom is welded to a steel shell, specimens for testing of sufficient fracture resistance can normally not be extracted directly from the welding seam area of the cask. Therefore, a methodology has to be developed to ensure compliance with the safety analysis considerations and the approved design specification. This paper describes such a methodology including brittle fracture analysis and de-termination of required material properties as well as aspects of quality assurance during manufacturing. T2 - RAMTRANSPORT 2012 - 9th International Conference on the Radioactive Materials Transport and Storage CY - London, UK DA - 2012-05-22 PY - 2012 IS - Session 4.2 RAM 18 SP - 1 EP - 6 AN - OPUS4-26344 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Günther A1 - Gersonde, Martin ED - Becker, G. T1 - Quantitative Untersuchungen über das Eindringen von Fluorid aus Modellbandagen in Holzmaste PY - 1958 SN - 0417-2000 N1 - Serientitel: Mitteilungen der Deutschen Gesellschaft für Holzforschung – Series title: Mitteilungen der Deutschen Gesellschaft für Holzforschung IS - 42 SP - 34 EP - 44 PB - Dt. Gesellschaft f. Holzforschung CY - Stuttgart AN - OPUS4-7757 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gersonde, Martin A1 - Becker, Günther ED - Becker, G. T1 - Untersuchungen über das Eindringen von Fluorid aus Handelsbandagen in Holzmaste PY - 1958 SN - 0417-2000 N1 - Serientitel: Mitteilungen der Deutschen Gesellschaft für Holzforschung – Series title: Mitteilungen der Deutschen Gesellschaft für Holzforschung IS - 42 SP - 44 EP - 53 PB - Dt. Gesellschaft f. Holzforschung CY - Stuttgart AN - OPUS4-7758 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin A1 - Becker, Günther T1 - Prüfung von Holzschutzmitteln für den Hochbau auf Wirksamkeit gegen Pilze an praxisgemäßen Holzproben ("Schwammkeller"- Versuche) - Testing of Wood Preservatives against Fungi in buildings under Semipractical Conditions PY - 1958 SN - 0018-3768 VL - 16 IS - 9 SP - 346 EP - 357 PB - Springer CY - Berlin AN - OPUS4-7762 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Günther A1 - Gersonde, Martin T1 - Die Fluorid-Verteilung aus Nachschutz-Modelbandagen in Holzmasten T1 - Distribution of Fluoride from Prototype Bandages for After-Treatment in Wooden Poles N2 - Aufgabe der Untersuchung — Versuchsausführung — Ergebnisse von Eindringtiefen-Messungen: Radiale und axiale Tiefenverteilung des Fluorids; Von Fluorid durchsetzte Holzmassen; Über die Streuung der Eindringtiefe des Nachschutz-Fluorids — Ergebnisse quantitativer Fluor-Analysen: Mengenmäßige Fluorid-Verteilung nach ljähriger Versuchsdauer; Mengenmäßige Fluorid-Verteilung nach gjähriger Versuchsdauer; Erklärung von Besonderheiten der mengenmäßigen Fluorid-Verteilung; Veränderungen zwischen 1- und gjähriger Versuchsdauer und ihre Ursachen; Reichweite einer sicheren Wirksamkeit des Nachschutz-Fluorids nach 5 Jahren; Gesamtmengen an Nachschutz-Fluorid in den Masten — Zusammenfassung — Schrifttum. PY - 1963 SN - 0018-3768 VL - 21 IS - 12 SP - 482 EP - 492 PB - Springer CY - Berlin AN - OPUS4-10275 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin A1 - Becker, Günther T1 - Die Verteilung von Nachschutz-Salzen aus Bandagen-Typen des Handels in Holzmasten PY - 1963 SN - 0013-5496 VL - 62 IS - 23 SP - 886 EP - 894 PB - VWEW-Energieverl. CY - Frankfurt, M. AN - OPUS4-10276 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schönhals, Andreas A1 - Szymoniak, Paulina A1 - Kolmangadi, Mohamed Aejaz A1 - Böhning, Martin A1 - Zamponi, M. A1 - Frick, B. A1 - Appel, M. A1 - Günther, G. A1 - Russina, M. A1 - Alentiev, D. A1 - Bermeshev, M. A1 - Zorn, R. T1 - Microscopic dynamics of highly permeable super glassy polynorbornenes revealed by quasielastic neutron scattering N2 - The molecular dynamics of addition-type poly(tricyclononenes) with Si-substituted bulky side groups has been investigated by a combination of neutron time-of-flight and neutron backscattering spectroscopy methods on a time scale from 0.1 ps to ca. 3 ns. The investigated poly(tricyclononenes) PTCNSi1 and PTCNSi2g both bear a high microporosity which makes them promising candidates for active separation layers for gas separation membranes. At least for larger gas molecules it is assumed that the pathways for diffusion require an enlargement of pre-existing micropores in terms of an activated zone. A low temperature relaxation process was found for both polymers by the performed neutron scattering experiments. This process was assigned to the methyl group rotation. It was analysed in terms of a jump diffusion in a three-fold potential. The analysis of the dependence of the elastic incoherent structure factor on the scattering vector yields the number of methyl groups which might be immobilized. For PTCNSi1 (3 methyl groups in the monomeric unit) it was found that all methyl groups take part in the methyl group rotation whereas for PTCNSi2g (6 methyl groups in monomeric unit) a considerable number of methyl groups are blocked in their rotation. This immobilization of methyl groups is due to the sterically demanding arrangement of the methyl groups in PTCNSi2g. This conclusion is further supported by the result that the activation energy for the methyl group rotation is three times higher for PTCNSi2g than that of PTCNSi1. KW - Highly permeably polynorbornenes KW - Polymers of intrinsic microporosity KW - Gas separation membranes KW - Quasielastic neutron scattering PY - 2021 DO - https://doi.org/10.1016/j.memsci.2021.119972 SN - 0376-7388 VL - 642 PB - Elesevier B.V. AN - OPUS4-53508 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thomas, Hans-Martin A1 - Wittig, Günther A1 - Maser, Dieter T1 - Ein Impuls-Wirbelstromprüfsystem mit rechnergestützter Erfassung und Auswertung der Meßsignale PY - 1982 SN - 0025-5300 VL - 24 IS - 8 SP - 282 EP - 287 PB - Hanser CY - München AN - OPUS4-36415 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thomas, Hans-Martin A1 - Wittig, Günther T1 - Application of a signal reconstruction method to evaluate pulsed eddy-current signals PY - 1985 SN - 0308-9126 VL - 18 IS - 5 SP - 251 EP - 256 PB - Elsevier CY - Amsterdam AN - OPUS4-34228 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wittig, Günther A1 - Thomas, Hans-Martin A1 - Maser, Dieter T1 - Eigenschaften von Tastspulen für die Anwendung des Impuls-Wirbelstromverfahrens PY - 1985 SN - 0025-5300 VL - 27 IS - 5 SP - 123 EP - 126 PB - Carl Hanser Verlag CY - München AN - OPUS4-34229 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wittig, Günther A1 - Thomas, Hans-Martin A1 - Maser, Dieter A1 - Hennig, P. T1 - Application of the pulsed-eddy-current techniques for the inspection of the austenitic cladding in a thermal shock loaded nozzle of a pressure vessel T2 - 6th International Conference on NDE in the Nuclear Industry and Equipment CY - Zürich, Switzerland DA - 1983-11-28 PY - 1984 SN - 0-87170-192-8 SP - 665 EP - 674 PB - American Society for Metals CY - Metals Park, Ohio AN - OPUS4-34232 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Schilling, O. A1 - Kuschke, Christian A1 - Darnstädt, A. A1 - Schubert, Sven A1 - Günther, U. A1 - Wille, Frank T1 - Requirements for management systems for manufacturing of transport packages: the new revision of BAM-GGR 011 guideline N2 - In accordance with IAEA SSR-6 para 306 a management system shall be established and implemented to ensure compliance with the relevant provisions of the IAEA regulations. BAM has issued an update of the guideline: the BAM-GGR 011. The new revision describes necessary quality assurance measures for design, manufacture, testing, documentation, use, maintenance and inspection of packagings for package designs requiring competent authority approval for the transport of radioactive material. The measures can be categorised as system-related and design-related. They are independently approved and monitored by the German competent authority BAM and its authorised expert (BAM/T). The qualification of the organisation applying for the design approval certificate is reviewed in the context of the design approval procedure. The quality assurance measures for manufacture consist of three main steps. Pre-assessment of manufacturing documents such as quality plans, specifications etc., Manufacturing inspections according the pre-assessed documents and inspection before commissioning including documentation review. Periodic inspections during operation as well as relevant specifications for use and maintenance ensure that the properties specified in the approval certificate are preserved over the package life time. Special provisions for the return on experience regarding operational feedback for design, manufacture, use, maintenance and inspection are given. Special focus shall be given here to the rearranged and meanwhile established system of manufacturing inspections. This includes more transparent roles for a) the Producers authorised inspection 11282 representative, b) the independent inspection expert (S), acting on behalf of the manufacturer with acceptance of BAM, and c) BAM or its authorised expert (BAM/T). Additional attention shall be drawn to the management of deviations during manufacturing and provisions for maintenance and periodic inspections. T2 - 19th International Symposium on the Packaging and Transportation of Radioactive Materials PATRAM 2019 CY - New Orleans, LA, USA DA - 04.08.2019 KW - Quality assurance KW - Transport KW - Manufacturing KW - Surveillance KW - Radioactive material PY - 2019 SP - Paper 1128, 1 AN - OPUS4-49059 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thomas, Hans-Martin A1 - Maser, Dieter A1 - Wittig, Günther T1 - Erzeugung sowie analoge und digitale Aufbereitung von Signalen zum Nachweis von Materialfehlern mit dem Impuls-Wirbelstromverfahren PY - 1981 SN - 0376-6845 IS - 3 SP - 153 EP - 158 PB - Schweizerischer Verband für die Materialprüfungen der Technik CY - Dübendorf AN - OPUS4-33328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wittig, Günther A1 - Thomas, Hans-Martin T1 - Design of a Pulsed Eddy-Current Test Equipment with Digital Signal Analysis T2 - Symposium on Eddy-Current Characterization of Materials and Structures CY - Gaithersburg, MD, USA DA - 1979-09-05 PY - 1981 N1 - Serientitel: ASTM special technical publication – Series title: ASTM special technical publication IS - 722 SP - 387 EP - 397 PB - ASTM CY - Philadelphia, PA, USA AN - OPUS4-33330 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wittig, Günther A1 - Thomas, Hans-Martin T1 - Voruntersuchungen an Dampferzeugerrohr-Testkörpern mit dem Impuls-Wirbelstromverfahren T2 - 4. Internationale Konferenz über Zerstörungsfreie Prüfung in der Kerntechnik CY - Lindau, Germany DA - 1981-05-25 PY - 1981 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 8 SP - 571 EP - 579 PB - DGZfP CY - Berlin AN - OPUS4-33331 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wittig, Günther A1 - Thomas, Hans-Martin T1 - Untersuchungen an Komponenten aus Aluminiumlegierungen mit dem Impuls-Wirbelstromverfahren T2 - 2. Europäische Tagung für Zerstörungsfreie Prüfung CY - Wien DA - 1981-09-14 PY - 1981 SP - ? (8 S.) CY - Wien AN - OPUS4-33332 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -