TY - CONF A1 - Marotzke, Christian T1 - Mechanik des Faser-Polymer Verbundes T2 - DGZfP Seminar CY - Berlin, Germany DA - 1990-06-12 PY - 1990 AN - OPUS4-5961 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Finite element analysis of the single fiber pull-out test T2 - STRUCENG and FEMCAD CY - Grenoble, France DA - 1990-10-17 PY - 1990 AN - OPUS4-5963 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Determination of the interfacial toughness using micromechanical tests T2 - ECCM-7, Seventh European Conference on Composite Materials CY - London, England DA - 1996-05-14 PY - 1996 AN - OPUS4-5918 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Interfacial crack propagation with friction arising in single fiber pull-out tests T2 - ICCI-VI - The Sixth International Conference on Composite Interfaces CY - Tel Aviv, Israel DA - 1996-05-05 PY - 1996 AN - OPUS4-5919 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Vergleich der Energiefreisetzungsrate bei mikromechanischen Versuchen T2 - Composite Forschung in der Mechanik CY - Paderborn, Germany DA - 1996-12-03 PY - 1996 AN - OPUS4-5920 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Fracture Mechanical Analysis of Pull-Out and Fragmentation Tests T2 - ICCM-11 - 11th International Conference on Composite Materials CY - Gold Coast, Australia DA - 1997-07-14 PY - 1997 AN - OPUS4-5923 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Energy Release Rate in Pull-out and Fragmentation Tests T2 - IPCM '97 CY - Eger, Hungary DA - 1997-09-01 PY - 1997 AN - OPUS4-5924 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Factors influencing the measured interface strength in the indentation and pull-out test T2 - ICCI 5 CY - Gothenburg, Sweden DA - 1994-06-19 PY - 1994 AN - OPUS4-5905 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Grenzschichtversagen in polymeren Verbundwerkstoffen T2 - Kuratoriumssitzung BAM CY - Berlin, Germany DA - 1994-10-17 PY - 1994 AN - OPUS4-5906 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Welche Aussagekraft haben mikromechanische Testmethoden für Faserverbundwerkstoffe - Vergleich der Spannungszustände in Pull-out, Fragmentation und Indentation Test mit Hilfe der FEM T2 - Seminarvortrag Fraunhofer Institut für Werkstoffmechanik CY - Freiburg, Germany DA - 1994-01-14 PY - 1994 AN - OPUS4-5907 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Untersuchung der Rissausbreitung im Interface beim Single Fiber Pull-out Test T2 - Composite Forschung in der Mechanik CY - Paderborn, Germany DA - 1994-12-06 PY - 1994 AN - OPUS4-5911 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Micromechanics of the interface in polymer composites-capabilities and limitations of the common test methods T2 - ICCM10 CY - Whistler, Canada DA - 1995-08-12 PY - 1995 AN - OPUS4-5912 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Theoretical analysis of the fracture process arising in single fiber pull-out tests T2 - IPCM4 CY - Eindhoven, Netherlands DA - 1995-09-11 PY - 1995 AN - OPUS4-5913 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Bruchmechanische Analyse des Grenzflächenversagens bei Einzelfaser Pull-out und Fragmentation Tests T2 - DVM-Tagung Bruchvorgänge CY - Berlin, Germany DA - 2000-02-22 PY - 2000 AN - OPUS4-5945 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Analysis of fiber, matrix and interface fracture in composites and fragmentation tests T2 - ECCM 9 Conference CY - Brighton, England DA - 2000-06-04 PY - 2000 AN - OPUS4-5946 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Detektion von Schädigungen in Faserverbundwerkstoffen mittels Röntgenrefraktion T2 - Tagung: Compositeforschung in der Mechanik CY - Paderborn, Germany DA - 2000-12-04 PY - 2000 AN - OPUS4-5947 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Fiber, matrix and interface fracture in composites T2 - Gordon Research Conference on Composites CY - Ventura, CA, USA DA - 2000-01-09 PY - 2000 AN - OPUS4-5948 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Characterization of the interface strength and polymer composites T2 - 7th International Conference on Interfacial Phenomena in Composite Materials - IPCM 2001 CY - Arcachon, France DA - 2001-09-11 PY - 2001 AN - OPUS4-5949 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Rissphänomene in Modell Composites T2 - 14. Workshop "Composite Forschung in der Mechanik" CY - Paderborn, Germany DA - 2001-12-03 PY - 2001 AN - OPUS4-5950 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Bewertung von Stoffgesetzen für Ealstomere anhand von Versuchen und numerischen Untersuchungen T2 - "GAMM Tagung" CY - Regensburg, Germany DA - 1984-04-16 PY - 1984 AN - OPUS4-5952 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Theoretische Untersuchung der Kraftübertragung zwischen Faser und Matrix T2 - BMFT Seminar "Faserverstärkte Polymere" CY - Stuttgart, Germany DA - 1987-06-03 PY - 1987 AN - OPUS4-5953 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Untersuchungen zum Kraftübertragungsmechanismus zwischen Faser und Matrix bei Verbundwerkstoffen T2 - Berliner Polymerentage CY - Berlin, Germany DA - 1987-10-13 PY - 1987 AN - OPUS4-5954 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Analyse von Grenzflächenrissen in Faserverbundwerkstoffen T2 - DVM-AK Bruchvorgänge CY - Dresden, Germany DA - 1998-02-18 PY - 1998 AN - OPUS4-5935 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Fracture mechanical analysis of fragmentation and pull-out tests T2 - Proceedings of ECCM-8 CY - Naples, Italy DA - 1998-06-03 PY - 1998 AN - OPUS4-5936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Ausbreitung von Mikrorissen in Faserverbundwerkstoffen T2 - Composite Forschung in der Mechanik 11 CY - Paderborn, Germany DA - 1998-12-08 PY - 1998 AN - OPUS4-5937 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Fracture mechanical analysis of failure in micromechanical tests T2 - IPCM '99 Conference CY - Berlin, Germany DA - 1999-09-08 PY - 1999 AN - OPUS4-5941 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Bruchmechanische Analyse mikromechanischer Tests - numerische Modellierung und Experimente T2 - Seminar am IPF CY - Dresden, Germany DA - 1999-03-29 PY - 1999 AN - OPUS4-5942 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Elementare Versagensprozesse in Faserverbundwerkstoffen T2 - Workshop: Composite Forschung in der Mechanik CY - Paderborn, Germany DA - 1999-11-29 PY - 1999 AN - OPUS4-5943 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Influence of the interface strength on local failure process in fiber reinforced composites T2 - ICCM-12 Conference CY - Paris, France DA - 1999-07-05 PY - 1999 AN - OPUS4-5944 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Mikrorissbildung als Sonde für die Beanspruchungsgeschichte von Faserverbundwerkstoffen T2 - Composite Forschung in der Mechanik CY - Paderborn, Germany DA - 2004-12-14 PY - 2004 AN - OPUS4-5883 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Rissausbreitung in Faserverbundwerkstoffen T2 - Berliner Polymeren-Tage CY - Berlin, Germany DA - 1991-10-09 PY - 1991 AN - OPUS4-5896 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - FE-Modelling of Micromechanical Phenomena in Fiber Reinforced Materials T2 - Finite-Element-Modelling of the Mechanical Behaviour of Materials CY - Stuttgart, Germany DA - 1992-10-26 PY - 1992 AN - OPUS4-5898 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Einfluss von geometrischen und materiellen Faktoren auf den Versagensprozess beim Single Fiber-Pullout-Test T2 - Komposite Forschung in der Mechanik CY - Paderborn, Germany DA - 1992-10-20 PY - 1992 AN - OPUS4-5899 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Comparison of the Stress Distrubution of different interfacial Strength Test Methods T2 - Interfacial Phenomena in Composite Materials (IPCM) 93 CY - Cambridge, England DA - 1993-09-13 PY - 1993 AN - OPUS4-5901 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Problems of the Determination of the Interface Strength with the Aid of the Single Fiber Pull-out Test T2 - ECCM 6 CY - Bordeaux, France DA - 1993-09-21 PY - 1993 AN - OPUS4-5902 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Vergleich mikromechanischer Testmethoden zur Bestimmung der Interface Festigkeit T2 - Composite Forschung in der Mechanik CY - Paderborn, Germany DA - 1993-11-23 PY - 1993 AN - OPUS4-5903 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - A critical evaluation of micromechanical interface test methods T2 - ECCM-CTS2 CY - Hamburg, Germany DA - 1994-09-13 PY - 1994 AN - OPUS4-5904 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Influence of local faults and microcracks on the mechanical properties of fibre reinforced materials T2 - 26. JEC CY - Paris, France DA - 1991-04-03 PY - 1991 AN - OPUS4-5886 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Theoretische Untersuchungen von Grenzflächenrissen in faserverstärkten Kunststoffen T2 - 3. Tagung "Deformation und Bruchverhalten von Kunststoffen" CY - Merseburg, Germany DA - 1991-06-17 PY - 1991 AN - OPUS4-5887 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Micromechanical investigations of fibre reinforced polymers T2 - 6th Conference on Mechanical Behaviour of Materials CY - Kyoto, Japan DA - 1991-07-29 PY - 1991 AN - OPUS4-5888 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Determination of the stress field in the single fibre pull-out test with the aid of the finite element method T2 - IPCM 91 CY - Leuven, Belgium DA - 1991-09-17 PY - 1991 AN - OPUS4-5891 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Determination of the elastic properties of short fibre reinforced materials T2 - Composite Research in Solid Mechanics CY - Stuttgart, Germany DA - 1991-12-05 PY - 1991 AN - OPUS4-5894 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Marotzke, Christian T1 - Étude micromécanique du mécanisme d'adhérence entre fibre et matrice dans les composites PY - 1989 SN - 0010-4361 VL - 29 IS - 3 SP - 223 EP - 229 PB - Butterworth-Heinemann CY - Guildford, Surrey AN - OPUS4-6349 LA - fra AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian ED - Zarka, J. ED - Ohtmer, O. T1 - Micromechanical Investigation of Fiber Reinforced Materials by Finite Element Analysis T2 - Struceng and Femcad CY - Grenoble, France DA - 1990-10-17 KW - Fiber Reinforced Plastic KW - Micromechanics KW - Interface Crack KW - Finite-Element Method KW - Composite Material Model PY - 1991 SN - 2-907669-14-1 SP - 95 EP - 100 CY - Gournay-sur-Marne, France AN - OPUS4-6350 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian A1 - Hampe, Andreas ED - Zarka, J. ED - Ohtmer, O. T1 - Finite Element Analysis of the Single Fiber Pull-Out Test T2 - Struceng and Femcad CY - Grenoble, France DA - 1990-10-17 KW - Composite Materials KW - Fiber Reinforced Plastics KW - Single Fiber Pull-Out Test KW - Interfacial Shear Stress KW - Finite-Element Method PY - 1991 SN - 2-907669-14-1 SP - 131 EP - 136 CY - Gournay-sur-Marne, France AN - OPUS4-6351 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian A1 - Qiao, Linan T1 - Analyse von Grenzflächenrissen in Faserverbundwerkstoffen T2 - 30. Tagung des DVM-Arbeitskreises Bruchvorgänge CY - Dresden, Deutschland DA - 1998-02-17 PY - 1998 SN - 0943-3473 IS - 230 SP - 459 EP - 468 PB - DVM CY - Berlin AN - OPUS4-6376 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian A1 - Hampe, Andreas T1 - Micromechanics of the interface in polymer composites capabilities and limitations of the common test methods T2 - 10th International Conference on Composite Materials CY - Quebec, Canada DA - 1995-05-08 PY - 1995 SN - 1-566-76313-4 VL - 6 SP - 517 EP - 524 PB - Technomic Publ. CY - Lancaster, Pa. AN - OPUS4-6825 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian A1 - Qiao, Linan ED - Bader, M. T1 - Determination of the interfacial toughness using micromechanical tests T2 - 7th European Conference on Composite Materials (ECCM-7) CY - London, England, UK DA - 1996-05-14 PY - 1996 SN - 1-85573-304-8 SP - 17 EP - 22 PB - Woodhead Publishing Ltd CY - Cambridge AN - OPUS4-6826 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hampe, Andreas A1 - Marotzke, Christian T1 - The Energy Release Rate of the Fiber/Polymer Matrix Interface: Measurement and Theoretical Analysis PY - 1997 SN - 0731-6844 SN - 1530-7964 VL - 16 IS - 4 SP - 341 EP - 352 PB - Technomic Publ. Co. CY - Westport, Conn. AN - OPUS4-6827 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian A1 - Hampe, Andreas ED - Scott, M. T1 - Fracture Mechanical Analysis of Pull-out and Fragmentation Tests T2 - 11th International Conference on Composite Materials CY - Gold Coast, Queensland, Australia DA - 1997-07-14 PY - 1997 SN - 1-85573-350-1 SP - V863 EP - V872 PB - Woodhead CY - Cambridge AN - OPUS4-6828 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian ED - Rossmanith, H.-P. T1 - Analysis of singularities and interfacial crack propagation in micromechanical tests T2 - 1st International Conference on Damage and Failure of Interfaces (DFI 1) CY - Vienna, Austria DA - 1997-09-22 PY - 1997 SN - 90-5410-899-1 SP - 365 EP - 372 PB - Balkema CY - Rotterdam AN - OPUS4-6829 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Marotzke, Christian A1 - Qiao, Linan T1 - Interfacial Crack Propagation arising in Single-Fiber Pull-Out Tests PY - 1997 SN - 0266-3538 VL - 57 SP - 887 EP - 897 PB - Elsevier CY - Barking AN - OPUS4-6830 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hampe, Andreas A1 - Marotzke, Christian ED - Brockmann, W. T1 - Messung der Scherfestigkeit in der Grenzfläche zwischen Polymer und Glas durch Einzelfaserexperimente T2 - 3. Symposiums der DGM CY - Konstanz DA - 1990-06-21 PY - 1989 SN - 3-88355-166-X PB - DGM Informationsges. CY - Oberursel AN - OPUS4-6806 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian A1 - Qiao, Linan ED - Visconti, I. T1 - Fracture Mechanical Analysis of Fragmentation Pull-Out Tests T2 - 8th European Conference on Composite Materials (ECCM-8) CY - Naples, Italy DA - 1998-06-03 PY - 1998 SN - 1-85573-377-3 VL - 4 SP - 443 EP - 450 PB - Woodhead Publishing Ltd CY - Cambridge AN - OPUS4-6807 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian A1 - Qiao, Linan T1 - Analysis of fiber, matrix and interface fracture in composites and fragmentation tests T2 - 9th ECCM ; 9th [European Conference on Composite Materials] CY - Brighton, England, UK DA - 2000-06-04 KW - Interface crack KW - Energy release rate KW - Fracture mechanics KW - Debonding KW - Thermal stresses KW - Friction KW - Finite element method KW - FEM PY - 2000 N1 - Serientitel: CF / IOM Communications Ltd – Series title: CF / IOM Communications Ltd IS - 11 SP - 1 EP - 10(?) PB - IOM Communications CY - London AN - OPUS4-6808 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian A1 - Hampe, Andreas A1 - Qiao, Linan T1 - Influence of the Interface Strenght on Local Failure Processes in Fiber Reinforced Composites T2 - 12th International Conference on Composite Materials ; 12th ICCM Europe CY - Paris, France DA - 1999-07-05 KW - Interface crack KW - Energy release rate KW - Fracture mechanics KW - Debonding KW - Thermal stresses KW - Friction KW - Finite element method KW - FEM PY - 1999 SN - 2-9514526-2-4 IS - 423 CY - Paris AN - OPUS4-6809 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bock, Hans Michael A1 - Brocks, Wolfgang A1 - Läer, R. A1 - Marotzke, Christian T1 - Ein Verfahren zur Berechnung des nichtlinearen Tragverhaltens von stählernen Rahmentragwerken mit finiten Elementen PY - 1989 SN - 0038-9145 SN - 1437-1049 SN - 0932-6375 VL - 58 IS - 12 SP - 365 EP - 370 PB - Ernst CY - Berlin AN - OPUS4-6810 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Marotzke, Christian T1 - Bewertung von Stoffgesetzen für Elastomere anhand von Versuchen und numerischen Untersuchungen PY - 1985 SN - 0044-2267 SN - 0946-8463 VL - 65 IS - 8 SP - 388 EP - 390 PB - Wiley-VCH CY - Potsdam AN - OPUS4-6811 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Marotzke, Christian T1 - Untersuchung der Kraftübertragung bei Faserverbundwerkstoffen PY - 1990 SN - 0044-2267 SN - 0946-8463 VL - 70 IS - 4 SP - T310 EP - T311 PB - Wiley-VCH CY - Potsdam AN - OPUS4-6812 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Marotzke, Christian T1 - Singularitäten in der Grenzfläche bei Faserverbundwerkstoffen PY - 1991 SN - 0044-2267 SN - 0946-8463 VL - 71 IS - 4 SP - T287 EP - T290 PB - Wiley-VCH CY - Potsdam AN - OPUS4-6813 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Marotzke, Christian T1 - Influence of local faults and micro cracks on the mechanical properties of fibre reinforced materials PY - 1991 SN - 0010-4361 VL - 31 IS - 3 SP - 271 EP - 274 PB - Butterworth-Heinemann CY - Guildford, Surrey AN - OPUS4-6814 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Marotzke, Christian ED - Jono, M. ED - Inoue, T. T1 - Micromechanical investigation of fibre reinforced polymers PY - 1991 VL - 3 SP - 67 EP - 72 PB - Pergamon Press CY - Oxford AN - OPUS4-6815 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian ED - Verpoest, I. ED - Jones, F. R. T1 - Determination of the stress field in the single fibre pull-out test with the aid of the finite element method T2 - 2nd International Conference "Interfacial Phenomena in Composite Materials" CY - Leuven, Belgium DA - 1991-09-17 PY - 1991 SN - 0-7506-0356-9 SP - 69 EP - 72 PB - Butterworth-Heinemann CY - Oxford AN - OPUS4-6816 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hampe, Andreas A1 - Marotzke, Christian T1 - Adhesion of polymers to reinforced fibres PY - 1992 SN - 0959-8103 SN - 1097-0126 SN - 0007-1641 VL - 28 SP - 313 EP - 318 PB - Wiley InterScience CY - Chichester, West Sussex AN - OPUS4-6817 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Marotzke, Christian T1 - Influence of the Fiber Length on the Stress from Glass and Carbon Fibers into a Thermo-plastic Matrix PY - 1993 VL - 1 IS - 2 SP - 153 EP - 166 PB - North-Holland CY - New York, NY AN - OPUS4-6818 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian ED - Naslain, R. ED - Lamon, J. ED - Doumeingts, D. T1 - Problems of the Determination of the Interface Strength with the Aid of the Single Fiber Pull-out Test T2 - 6th European Conference on Composite Materials ; 1st International Conference on High Temperature Ceramic Matrix Composites (HT-CMC1) CY - Bordeaux, France DA - 1993-09-20 PY - 1993 SN - 1-85573-143-6 SP - 281 EP - 286 PB - Woodhead CY - Cambridge AN - OPUS4-6819 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Marotzke, Christian T1 - The elastic Stress Field arising in the Single Fiber Pull-out Test PY - 1994 SN - 0266-3538 VL - 50 SP - 393 EP - 405 PB - Elsevier CY - Barking AN - OPUS4-6820 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Meretz, S. A1 - Auersch, W. A1 - Marotzke, Christian A1 - Schulz, Eckhard A1 - Hampe, Andreas T1 - Investigation of Morphology-dependent Fracture Behaviour with the Single-fibre Pull-out Test PY - 1993 SN - 0266-3538 VL - 48 SP - 285 EP - 290 PB - Elsevier CY - Barking AN - OPUS4-6821 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian ED - Hogg, P. ED - Schulte, K. T1 - A critical evaluation of micromechanical interface test methods T2 - 2nd European Conference on Composites Testing and Standardisation (ECCM-CTS) ; 2nd International Conference on Composites Testing and Standardization CY - Hamburg, Germany DA - 1994-09-13 PY - 1994 SN - 1-85573-187-8 SP - 75 EP - 83 PB - Woodhead Publ. CY - Abington, Cambridge AN - OPUS4-6822 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Marotzke, Christian T1 - The fracture toughness of the glass fibre/polymer matrix interface: measurement and theoretical analysis T2 - The fracture toughness of the glass fibre/polymer matrix interface: measurement and theoretical analysis CY - Guildford, England, UK DA - 1995-03-27 PY - 1995 CY - Guildfort AN - OPUS4-6823 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hampe, Andreas A1 - Marotzke, Christian T1 - The energy release rate of the fiber/polymer matrix interface: measurement and theoretical analysis PY - 1995 SP - 326 EP - 335 PB - Technomic Publ. CY - Lancaster AN - OPUS4-6824 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Microscopical failure processes in fiber reinforced polymers - Mechanical aspects of the adhesion between fiber and matrix T2 - 11th International Conference on Mechanics and Technology of Composite Materials CY - Sofia, Bulgaria DA - 2006-10-02 PY - 2006 AN - OPUS4-13239 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian A1 - Kalinka, Gerhard ED - Zachariev, G. T1 - Microscopical Failure Processes in Fiber Reinforced Polymers - Mechanical Aspects of the Adhesion between Fiber and Matrix T2 - 11th International Conference on Mechanics and Technology of Composite Materials CY - Sofia, Bulgaria DA - 2006-10-02 KW - Composite materials KW - Failure process KW - Adhesion PY - 2006 SP - 37 EP - 42 PB - Bulgarian Academy of Sciences CY - Sofia AN - OPUS4-14027 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Micromechanics Based Failure Analysis of Laminates under Off-axis Loading T2 - ICCM-18 - International Conference on Composite Materials CY - Jeju, South Korea DA - 2011-08-21 PY - 2011 AN - OPUS4-24195 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Failure Criteria for Fiber Reinforced Materials based on the Interface Strength T2 - ICM11 - International Conference on the Mechanical Behaviour of Materials CY - Como, Italy DA - 2011-06-05 PY - 2011 AN - OPUS4-23806 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian A1 - Basan, Ricardo T1 - Micromecanics based failure analysis of laminates under off-axis loading N2 - The debonding of a fiber in a glass fiber / epoxy composite under transverse loading is studied. The stress field in the interface as well as the energy release rate are analysed for two fiber volume fractions. The circumferential propagation of an Interface crack starting at the center of a fiber which is located within a hexagonal fiber array is studied. The analysis is performed by a finite element Simulation under plane stress conditions. Two fiber volume fractions are considered, this is 30% and 70%. The stress distribution before and during crack propagation is calculated for different stages of the crack. The crack opens by dominating tensile stresses in the first phase while it closes when propagating along the interface. The total energy release rate as well as the mode I and mode II parts are calculated. In the first phase the crack is driven by an increasing mode I energy release rate, indicating an unstable crack propagation. Then the mode II energy release rate increases rapidly and dominates the debonding process while the mode I part decreases and finally vanishes. Subsequently also the mode II part decreases, indicating stable crack propagation. In the last phase the crack becomes unstable again due to a strongly increasing mode I energy release rate. During the debonding process a remarkable change the mode ratio takes place. The main features of the debonding process are similar for low and high fiber volume fraction. In case of the high fiber content, however, the mode I part is more pronounced and the maximum of the total energy release rate is shifted to lower crack angles. T2 - ICCM 18 - 18th International conference on composite materials CY - Jeju Island, Korea DA - 21.08.2011 KW - Composite Materials KW - Interface Crack KW - Failure Analysis KW - Adhesion PY - 2011 IS - T35-3-IF2032 SP - 1 EP - 6 AN - OPUS4-24252 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Failure criterion based on adhesion for composites under transverse loading T2 - Thermosets 2011 Conference CY - Berlin, Germany DA - 2011-09-21 PY - 2011 AN - OPUS4-24384 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Interfacial Failure in Composites under Transverse Loading T2 - 15th Meeting on Composites Materials and Structures CY - Haifa, Israel DA - 2011-11-15 PY - 2011 AN - OPUS4-24808 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Interfacial failure in composites under off-axis loading T2 - MCM 2012 Conference CY - Riga, Latvia DA - 2012-05-29 PY - 2012 AN - OPUS4-25957 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Fracture Toughness of Fiber Reinforced Composites under Transverse Loading T2 - 12th SAMPE SEICO Conference CY - Paris, France DA - 2012-03-26 PY - 2012 AN - OPUS4-25699 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Failure of Composites under Transverse Loading - a Fracture Mechanical Approach T2 - 15th European Conference on Composite Materials (ECCM15) CY - Venice, Italy DA - 2012-06-25 PY - 2012 AN - OPUS4-26127 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Failure criterion based on adhesion for composites under transverse loading N2 - The failure of laminates usually is initiated by the failure of the plies with the maximum transverse stresses. The failure of those plies generally reduces the load carrying capability of the laminate, even though they carry only a small part of the external load. The analysis of failure under off-axis stresses accordingly is essential for the prediction of the strength of laminates. This is taken into account in the "mechanisms based failure criteria" e.g. by Puck. Most of these inter fiber failure criteria are not based on the micromechanics of the failure process but on prescribed stress interaction functions. The failure of plies under transverse loading obviously is governed by the bond strength between fiber and matrix fiber. The interfacial debonding was studied e.g. by Paris et al. and Corea et al.. The bond strength between fiber and matrix usually is measured by using micromechanical tests e.g. pull-out, push-out or fragmentation tests. Stress analyses as well as fracture mechanical analyses show that the interfacial failure over a large range is dominated by shear stresses (Kim and Mai, Pisanova et al, Marotzke and Qiao). The stress distribution arising in those experiments however differs from the stresses acting in a lamina under transverse loading. In transverse failure of a lamina, radial stresses as well as shear stresses are dominating the failure process of the interface. In addition longitudinal shear stresses are present. Experimental work concerning off-axis loading of single fibers was done e.g. by Tandon and Kim and by Ogihara and Koyanagi. They studied the influence of the fiber alignment by using a specimen in form of a cruciform with skew wings. T2 - Thermosets 2011 - From monomers to components - 2nd international conference on thermosets CY - Berlin, Germany DA - 21.09.2011 KW - Composites KW - Strength KW - Adhesion KW - Fracture mechanics PY - 2011 SN - 978-3-8396-0312-3 SP - 86 EP - 88 PB - Fraunhofer Verlag CY - Berlin AN - OPUS4-26451 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Influence of the Interface on the Failure of Composites under Off-Axis Loading T2 - Interface 21, Kyoto Institute of Technology CY - Kyoto, Japan DA - 2012-08-06 PY - 2012 AN - OPUS4-26471 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian A1 - Feldmann, Titus T1 - Fracture mechanics of composite plies on microscale N2 - The determination of the strength and the failure behaviour of fiber reinforced composites is a complex task. This is mainly due to the anisotropy and the inhomogeneiety of the material on the microscale. The strength or the fracture toughness of the interface between fiber and matrix is the key factor controlling the failure process on microscale, especially under loads transverse to the fiber axes. The ultimate failure of a laminate is a complex process consisting of a large number of different subprocesses. Due to its highly dynamic nature on one hand and the microscopical scale on the other it is not possible to observe the ultimate failure directly or even to analyse it theoretically. However, long before ultimate failure occurs a large number of elementary failure processes take place in a rather static manner or at least at low crack Propagation speed. T2 - ICCM19 - 19th International conference on composite materials CY - Montreal, Canada DA - 28.07.2013 KW - Fracture mechanics KW - Laminate KW - Interface KW - Debonding KW - Energy release rate PY - 2013 SP - 5354 EP - 5363 AN - OPUS4-28913 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Fracture mechanics of composite plies on microscale T2 - International Conference on Composite Materials - ICCM19 CY - Montreal, Canada DA - 2013-07-29 PY - 2013 AN - OPUS4-28876 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian A1 - Feldmann, Titus T1 - Failure of epoxy resins and composites under multiaxial loads N2 - The failure of laminates is originated in plies loaded transverse to the fiber direction, e.g. in the 90° ply of a cross ply laminate. The initiation of failure is due to the debonding of individual fibers At some point the interface crack kinks into the matrix and propagates towards the inter-face of the neighbouring fiber. The cracks then continue propagating through the full ply. The interface failure obviously is the dominating process of the failure of plies in high fiber volume fraction composites. Several authors investigated the interfacial crack propagation on model systems. First, Varna and Paris studied the debonding process on a single fiber embedded in pure matrix under transverse ten-sion by fracture mechanical analyses. Correa and Paris performed experimental as well as numerical studies by calculating the mixed mode energy release rate under different loading conditions. These analyses were extended to fibers surrounded by a composite material by the present authors. Among others, Comninou as well as Sun and Jih have shown that the separation into a mode I and mode II energy release rate is not universal but the mixed mode ratio depends on the length of the crack increment. Comninou developed a solution of an interface crack between dissimilar media which reveals the even a small contact zone is found near the crack tip. As a result, the mode I part of the energy release rate vanishes because no opening of the crack takes place. The contact zone, however, is extremely small. If these mathematical phenomena, however, are relevant for physical problems is not verified. T2 - Thermosets 2013 - 3rd International conference on thermosets CY - Berlin, Germany DA - 18.09.2013 KW - Fracture mechanics KW - Laminate KW - Interface KW - Debonding KW - Energy release rate PY - 2013 SN - 978-3-00-043394-8 SP - 83 EP - 86 AN - OPUS4-29164 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Failure of Epoxy Resins and Composites under Multiaxial Loads T2 - Thermosets 2013 CY - Berlin, Germany DA - 2013-09-19 PY - 2013 AN - OPUS4-29137 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian A1 - Feldmann, Titus ED - Milazzo, A. ED - Aliabadi, M. H. T1 - Fracture mechanics of fiber-matrix interfaces in composites under transverse loading T2 - FDM 2013 - 12th International conference on fracture and damage mechanics CY - Sardinia, Italy DA - 2013-09-17 KW - Fracture mechanics KW - Laminate KW - Interface KW - Debonding KW - Energy release rate PY - 2013 SN - 978-3-03785-830-1 SN - 1013-9826 SN - 1662-9809 SN - 1662-9795 SP - 433 EP - 436 PB - Trans Tech Publications AN - OPUS4-29142 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Fracture mechanics of fiber-matrix interfaces in composites under transverse loading T2 - International Conference on Fracture and Damage Mechanics (FDM) CY - Alghero, Italy DA - 2013-09-17 PY - 2013 AN - OPUS4-29121 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Micromechanics of First Ply Failure in Composite Laminates T2 - 17th International Conference on Composite Structures (ICCS17) CY - Oporto, Portugal DA - 2013-06-17 PY - 2013 AN - OPUS4-28676 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hampe, Andreas A1 - Marotzke, Christian T1 - Experimental Results of a Pull-Out Test Performed with Single- and Multi-Fiber Samples N2 - Widely-used methods for characterising the fibre/matrix interface in polymeric composites are the fragmentation test and the droplet test as a special kind of the single-fibre pull-out test. A severe disadvantage of these tests is that non-realistic model samples are investigated which contain only one fibre in the matrix. In order to obtain data about the effect of the different residual stress situations for fibres in such samples and in composites, pull-out tests of E-glass fibres in polystyrene and polycarbonate are performed using samples, where the investigated fibre is surrounded by 0 to 3 other near fibres. Neighbouring fibres can increase the pull-out forces by a factor of three and the interfacial toughness by a factor of four. This has to be taken into account, if the tests are performed not only for comparison reasons but for measuring interface properties. KW - Interface KW - Fiber pull-out KW - Residual stress KW - Fracture toughness KW - Friction PY - 2002 DO - https://doi.org/10.1080/00218460210381 SN - 0021-8464 SN - 1545-5823 VL - 78 IS - 2 SP - 167 EP - 187 PB - Gordon & Breach CY - New York, NY AN - OPUS4-1975 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Marotzke, Christian A1 - Qiao, Linan ED - Bader, M. T1 - Determination of the interfacial fracture toughness using micromechanical tests T2 - 7th European Conference on Composite Materials (ECCM-7) CY - London, England, UK DA - 1996-05-14 KW - Micromechanik KW - Grenzfläche KW - Bruch KW - Finite-Elemente-Methode PY - 1996 SN - 1-85573-304-8 VL - 2 SP - C609-1-C609-6 PB - Woodhead Publishing Ltd CY - Cambridge AN - OPUS4-655 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian A1 - Basan, Ricardo T1 - Fracture toughness of fiber reinforced composites under transverse loading N2 - The debonding of a fiber in a glass fiber / epoxy composite under transverse loading is analysed. The stress field in the interface as well as the energy release rate are analysed for various fiber volume fractions between 5% and 85%. The circumferen-tial propagation of an interface crack in a hexagonal fiber array is studied. The analy-sis is performed by a finite element simulation under plane stress conditions. The stress distribution during crack propagation is calculated for different crack phases. The crack starts under dominating mode I stresses. After propagating some 60° the mode II part reaches a maximum while the mode I part vanishes and the crack clos-es. The further crack propagation is driven by mode II stresses only. In addition, the stress transfer into the neighbouring fibers during debonding is studied. T2 - SAMPE Europe 33rd International conference SEICO 12 CY - Paris, France DA - 26.03.2012 KW - Composites KW - Fracture toughness KW - Interface PY - 2012 SN - 978-3-9523565-5-5 IS - Session 5B / Paper 13 SP - 309 EP - 314 AN - OPUS4-26070 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian A1 - Feldmann, Titus T1 - Failure of composites under transverse loading - a fracture mechanical approach N2 - The failure of fiber reinforced composites under transverse loading is investigated on a representative volume element. The volume element is composed of a twelve fiber hexagonal array. The debonding of the central fiber is studied under transverse shear as well as under transverse compressive loading by calculating the mode I and mode II part of the energy release rate. The initiation of failure is assumed to take place at the location of maximum tensile or maximum shear stresses, respectively. In order to determine the failure initiation point, the stress field in the interface before crack initiation is calculated. T2 - ECCM15 - 15th European conference on composite materials CY - Venice, Italy DA - 24.06.2012 KW - Composites KW - Failure criteria KW - Fracture KW - Debonding KW - Fracture toughness KW - Interface PY - 2012 SN - 978-88-88785-33-2 SP - 1 EP - 7 AN - OPUS4-26450 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian A1 - Feldmann, Titus T1 - Nonlinear time dependent behaviour of epoxy resins N2 - The nonlinear behaviour of epoxy resins is studied on standard tensile tests. A strain field measurement system is applied (Aramis) in order to monitor local strains. The residual strain is measured by recovering the specimens for up to 68 hours after unloading. The time span the specimen is exposed to load has a large influence on the creeping process and the residual strain after recovering. This is studied by comparison of instantaneous unloading with keeping the specimen under permanent load for thirty minutes. It is shown that moderate differences in the initial strain can lead to large differences in the creep behaviour as well as in the residual strain. T2 - 37th Risø International Symposium on Materials Science CY - Risø, DK DA - 05.09.2016 KW - composites KW - epoxy resin KW - viscoelasticity KW - plasticity PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-378552 DO - https://doi.org/10.1088/1757-899X/139/1/012035 SN - 1757-8981 VL - 139 SP - Article 012035, 1 EP - 8 PB - IOP Publishing CY - London AN - OPUS4-37855 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Prewitz, Marc A1 - Müller, Ralf A1 - Marotzke, Christian A1 - Holtappels, Kai T1 - Characterization of glass capillary storage modules considering permeability and mechanical stress via finite elements N2 - Glass capillaries are potential candidates for long term hydrogen storage under high pressure. Burst pressure strongly drops with surface damaging, a polymer coating is needed. The aim is to study stress distribution within single coated glass capillaries sealed to metal fittings T2 - 88. Glastechnische Tagung DGG – ACerS GOMD 2014 CY - Aachen, Germany DA - 25.05.2014 KW - Burst test KW - Hydrogen storage KW - Polymer coating PY - 2014 AN - OPUS4-35784 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -