TY - CONF A1 - Poltavtseva, Marina T1 - Electrochemical investigations of carbon-based conductive coatings for cathodic protection of steel reinforcement T2 - Junior EUROMAT 2014 CY - Lausanne, Switzerland DA - 2014-07-21 PY - 2014 AN - OPUS4-31296 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Poltavtseva, Marina T1 - Untersuchungen an Prüfkörpern im Labormaßstab zur Anwendbarkeit leitfähiger Beschichtungen auf Karbonbasis für den Einsatz als Fremdstromanoden im Kathodischen Korrosionsschutz von Stahlbetonbauteilen T2 - AK-Korrosion im Bauwesen CY - Heligoland, Germany DA - 2014-06-02 PY - 2014 AN - OPUS4-30836 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Poltavtseva, Marina T1 - Electrochemical investigation of carbon-based conductive coatings for application as anodes in ICCP system of reinforced concrete structures T2 - EUROCORR 2014 CY - Pisa, Italy DA - 2014-09-08 PY - 2014 AN - OPUS4-31379 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ebell, Gino A1 - Poltavtseva, Marina A1 - Mietz, Jürgen T1 - Electrochemical investigation of carbon-based conductive coatings for application as anodes in ICCP system of reinforced concrete structures N2 - Carbon‐based conductive coatings are complex composites, consisting of an organic or inorganic binder and conductive carbon components, for application as anodes in impressed current cathodic protection systems of reinforced concrete structures. The electrochemical properties of three coatings at different humidity and in saturated calcium hydroxide solution were studied by electrochemical methods, such as electrochemical impedance measurement, measuring of open circuit potential over time and galvanostatic polarization. The dissolved organic and inorganic carbons in electrolyte solution were quantified by using a photometric method. The structures of the coatings were investigated before and after the electrochemical tests by microscopy and scanning electron microscope/EDX analysis. The results of the electrochemical impedance measurements show that the tested coatings all have a relatively low resistance, which is between 100 and 200V. The binder and the surface porosity influence the degradation behavior of those coatings. Especially the organic binder reacts with the strong alkaline medium under dissolving of organic carbon. T2 - EUROCORR 2014 - European corrosion congress CY - Pisa, Italy DA - 08.09.2014 KW - Cathodic protection KW - Concrete KW - ICCP PY - 2014 SN - 978-3-89746-159-8 SP - O-7489, 481 EP - O-7489, 481 AN - OPUS4-31430 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Poltavtseva, Marina A1 - Ebell, Gino A1 - Mietz, Jürgen T1 - Entwicklung und Erprobung einer neuen Prüfmesszelle für elektrochemische Untersuchungen leitfähiger Beschichtungen auf Karbonbasis in Elektrolytlösungen N2 - Leitfähige Beschichtungen auf Karbonbasis können als sogenannte Anstrichanode (Sekundäranode) für den Kathodischen Korrosionsschutz (KKS) von Stahlbetonbauteilen zum Einsatz kommen. Die Beschichtungen sind komplexe Verbundwerkstoffe, die aus einem Bindemittel, leitfähigen Füllstoffen, einem Lösemittel und Additiven bestehen. Als Bindemittel bzw. Matrix werden anorganisch-mineralische und organische Materialien verwendet, diese werden üblicher Weise für Fassadenfarben, Putze, Estriche und Mörtel in der Bauindustrie genutzt. Als leitfähige Pigmente für die Beschichtungen werden häufig feines Graphitpulver, Industrieruß und Kohlefaser verwendet. Die Mischung wird als Paste oder wässrige Dispersion auf die entsprechend vorbereitete Betonoberfläche aufgetragen und kann dadurch eine gleichmäßige Verteilung des Schutzstromes auf einer großen Oberfläche gewährleisten. Für die Stromzuführung vom Gleichrichter in die Beschichtungen werden in definiertem Abstand Drähte (sog. Primäranode) aus z.B. platiniertem Titan, Kupfer oder mischoxidbeschichtetem Titan eingebaut. Der Minuspol des Gleichrichters wird an der Bewehrung und der Pluspol an der Primäranode angeschlossen. Beim Anlegen eines Schutzstromes, der zwischen der Anode und der Kathode fließt, wird das Potential des Bewehrungsstahls unterhalb -720 mV (gegen Ag/AgCl/0,5 M KCl) in einer inaktiven Potentialbereich abgesenkt und der Korrosionsvorgang unterdrückt. Der Stromfluss wird durch die elektrolytische Leitfähigkeit des Betons bzw. Betonporenwassers und durch elektrochemische Reaktionen an der Anodenoberfläche und der Kathodenoberfläche ermöglicht. Dabei werden an der Oberfläche des Bewehrungsstahls, durch die elektrochemische Reduktion von Sauerstoff, alkalisch wirkende Hydroxylionen (OH’) gebildet und an der inerten Anodenoberfläche wird Wasser (bzw. Hydroxylionen) zu Sauerstoff oxidiert. T2 - 15. Sommerkurs Werkstoffe und Fügen am Institut für Werkstoff- und Fügetechnik CY - Magdeburg, Germany DA - 12.09.2014 PY - 2014 SN - 978-3-940961-85-3 SP - 207 EP - 214 AN - OPUS4-31474 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Heyn, Andreas A1 - Ebell, Gino A1 - Lehmann, Jens A1 - Poltavtseva, Marina T1 - Innovative Methoden in der Korrosionsforschung an der BAM T2 - 15. Sommerkurs Werkstoffe und Fügen am Institut für Werkstoff- und Fügetechnik CY - Magdeburg, Germany DA - 2014-09-12 PY - 2014 SN - 978-3-940961-85-3 SP - 53 EP - 64 AN - OPUS4-31479 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -