TY - JOUR A1 - Baumann, Maria A1 - Falkenhagen, Jana A1 - Weidner, Steffen A1 - Wold, C. A1 - Uliyanchenko, E. T1 - Characterization of copolymers of polycarbonate and polydimethylsiloxane by 2D chromatographic separation, MALDI-TOF mass spectrometry, and FTIR spectroscopy N2 - The structure and composition of polycarbonate polydimethylsiloxane copolymer (PC-co-PDMS) was investigated by applying various analytical approaches including chromatographic separation methods, spectrometric, and spectroscopic detection techniques. In particular, size exclusion chromatography (SEC) and liquid adsorption chromatography operating at different conditions (e.g. using gradient solvent systems) were used to achieve separations according to molar mass and functionality distribution. The coupling of both techniques resulted in fingerprint two-dimensional plots, which could be used to easily compare different copolymer batches. Matrix-assisted laser desorption/ionization-time-of-flight (MALDI-TOF) mass spectrometry was applied for structural investigations. The different ionization behavior of both comonomers, however, strongly limited the applicability of this technique. In contrast to that, Fourier-transform Infrared (FTIR) spectroscopy could be used to quantify the amount of PDMS in the copolymer at different points in the chromatogram. The resulting methodology was capable of distinguishing PC-co-PDMS copolymer from PC homopolymer chains present in the material. KW - FTIR KW - Liquid chromatography KW - Mass spectrometry KW - Gradient elution KW - Polycarbonate-co-dimethylsiloxane copolymer PY - 2020 DO - https://doi.org/10.1080/1023666X.2020.1820170 VL - 25 IS - 7 SP - 1 EP - 12 PB - Taylor & Francis AN - OPUS4-51369 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Baumann, Maria T1 - Characterization of poly(carbonate-dimethylsiloxane)-copolymers via LC, MALDI-TOF mass spectrometry and FTIR N2 - Copolymers made of polycarbonate (PC) and polydimethylsiloxane (PDMS) are broadly applied in material science. High impact-stability and transparency are the marks of bisphenol-A polycarbonate. PDMS on the other hand excels in thermal stability, flame resistance and weatherability. Combining those favourable characteristics in a copolymer yields in a ductile but impact-resistant and flame retardant material. In order to understand the synthesis process and to improve the quality and characteristics of a copolymer, knowing its structure is essential. The challenge lies in the variety of heterogeneities like molecular mass-, block-size- and block-distribution. This study addresses the structural characterization of PC-PDMS-copolymers using different liquid chromatographic techniques, including two dimensional combinations, hyphenated to MALDI-mass spectrometry and FTIR. The large difference in polarities of PC and PDMS is a challenge for liquid chromatography as well as ionization in MALDI. Nevertheless, we were able to differentiate between homopolymer and actual copolymer, clarify the presence of cyclic structures and gain information about the PDMS blocks T2 - SCM-8; International Symposium on the CY - Amsterdam, The Netherlands DA - 30.01.2017 KW - Copolymer characterization KW - Liquid chromatography KW - FTIR KW - MALDI-TOF-MS KW - LCCC PY - 2017 AN - OPUS4-39277 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -