TY - JOUR A1 - Gödde, Markus A1 - Clemens, Jörg A1 - Malow, Marcus T1 - Screening Procedures for Self-Reactive Substances, Differential Scanning Calorimetry-Onset and Heat-Flux Criteria N2 - We present a newscreening procedure for the determination of the thermal stability of potential candidates for the class of self-reactive substances. For the classification of self-reactive substances, elaborate testing is necessary to determine the applicable type, according to the regulations. Annex 6 of the UNManual of Tests and Criteria permits that the classification procedure for self-reactive substances may be omitted, if the estimated self accelerating decomposition temperature (SADT) is greater than 75 °C for a 50 kg package using an appropriate calorimetric technique, but no technique is described. Based on stationary theories of thermal explosion, we developed a screening approach using differential scanning calorimetry (DSC) onset and heat-flux criteria, respectively, at relevant temperatures. The proposed approach is validated with experimental data. KW - Self-reactive substances KW - Classification KW - Differential scanning calorimetry KW - Self accelerating decomposition temperature KW - Screening-procedures PY - 2025 DO - https://doi.org/10.1002/ceat.12006 SN - 1521-4125 SP - 1 EP - 9 PB - Wiley-VCH GmbH AN - OPUS4-62678 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Ferrero, Fabio A1 - Malow, Marcus A1 - Schmidt, Martin A1 - Krause, Ulrich T1 - Leitfaden zur Brandvermeidung bei der Lagerung von Biomasse N2 - Die Menge an genutztem, verarbeitetem und gelagertem Holz steigt von Jahr zu Jahr. In der Folge konnte in den letzten fünf Jahren eine deutlich gestiegene Zahl von Bränden in Holzlagern und -halden festgestellt werden. Viele dieser Brände sind durch Selbstentzündung des Materials verursacht worden. Sind die Ursachen der Selbstentzündung bekannt, kann die Brandentstehung durch geeignete Maßnahmen vermieden werden. Die Fachgruppe II.2 „Reaktionsfähige Stoffe und Stoffsysteme“ der Bundesanstalt für Materialforschung und -prüfung hat in diesem Leitfaden das Thema aufgegriffen und die derzeit vorliegenden Erkenntnisse zusammenfassend dargestellt. Ziel des Leitfadens ist es, die Grundlagen der Selbstentzündung von Biomasse am Beispiel von Holz in übersichtlicher Form darzustellen und daraus praktische Hinweise zur Vermeidung der Selbstentzündung von Holzhalden abzuleiten, um so einen Weg für einen sicheren und nachhaltigen Umgang mit diesem Rohstoff zu ebnen. Dem Leitfaden liegen Ergebnisse des Forschungsvorhabens „Brandvermeidung bei der Lagerung von biogenen Brennstoffen“ zugrunde. Das Projekt wurde innerhalb der Fördermaßnahme „klimazwei – Forschung für den Klimaschutz und Schutz vor Klimawirkungen“ des Bundesministeriums für Bildung und Forschung finanziell gefördert (Förderkennzeichen 01LS05079). Für diese Förderung möchten die Autoren sich bedanken. T3 - BAM Forschungsberichtreihe - 284 PY - 2009 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1678 SN - 978-3-9812354-1-8 SN - 0938-5533 VL - 284 SP - 1 EP - 22 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-167 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosenberg, Marika A1 - Michael-Schulz, Heike A1 - Wehrstedt, Klaus-Dieter A1 - Malow, Marcus T1 - Validation of the UN test method N.5 N2 - Many substances react with water in such a way that flammable gases are formed. For transport issues this reaction may possess a considerable hazard especially if the cargo is wetted by rain or by water from other sources. In the UN Recommendations on the Transport of Dangerous Goods these kinds of problems are addressed. The UN test N.5 “Test method for substances which in contact with water emit flammable gases” corresponds to this hazard. Classification according to the test method is done by measurement of the gas evolution rate of the flammable gas by any suitable procedure. At BAM a gravimetric approach is used to measure the gas evolution rate. In this paper we present the evaluation of the apparatus by means of an absolute calibration routine utilizing a reaction where a known amount of gas is produced as well as the evaluation of important parameters influencing the gas evolution rate using different substances. It can be shown that the apparatus is capable of measuring absolute gas volumes as low as 6 mL with an acceptable error of about 17% as determined from the reaction of Mg with demineralized water. T2 - 15th Annual symposium, Mary Kay O'Connor process safety center CY - College Station, TX, USA DA - 23.10.2012 KW - UN test N.5 KW - Water-reactive substance KW - Flammable gas PY - 2012 SN - 978-0-615-53719-1 SP - 826 EP - 835 AN - OPUS4-26898 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Malow, Marcus A1 - Schmidt, Martin A1 - Krause, Ulrich ED - Böllinghaus, Thomas ED - Kitagawa, Masaki ED - Kishi, Teruo ED - Lexow, Jürgen T1 - Computational modelling of the self-ignition process to achieve safe storage of biomass T2 - 1st World Materials Research Institutes Forum (WMRIF) - Workshop for young materials scientists CY - Tsukuba, Ibaraki, Japan DA - 2008-07-22 KW - Self-ignition KW - Fire prevention KW - Storage KW - Biomass KW - Bulk materials PY - 2008 SN - 978-4-9900563-3-9 SP - XXII 1 EP - 16 CY - Tsukuba, Ibaraki, Japan AN - OPUS4-17861 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - Notwendigkeiten und Möglichkeiten zur Verifizierung von Prüfapparaturen zur Bestimmung sicherheitstechnischer Kennzahlen N2 - Prüfapparaturen zur Bestimmung sicherheitstechnischer Kennzahlen müssen präzise messen, um verlässliche Ergebnisse zu produzieren. Oftmals gibt es in der Methodenbeschreibung allerdings keine Informationen zu Messunsicherheiten o.ä.. In dem Vortrag werden Ringversuchsprogramme das CEQAT-DGHS beschrieben und aktuelle Arbeiten zu Verifizierungsverfahren von Messmethoden beschrieben. T2 - 14. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 07.11.2019 KW - Gefahrgut KW - UN-Test N.5 KW - Verifizierung von Prüfapparaturen KW - Messunsicherheit PY - 2019 AN - OPUS4-50233 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - CEQAT-DGHS Development of procedures for the verification of test apparatuses (Example UN Test N.5) N2 - This presentation focuses on General aspects of development of verification methods. The development of verification methods is demonstrated using the test method UN Test N.5 as an example. T2 - EOS IGUS Meeting CY - Brussels, Belgium DA - 21.05.2019 KW - Dangerous Goods KW - UN-Test N.5 KW - Verification method KW - Measurement uncertainty PY - 2019 AN - OPUS4-49003 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - Different methods for the determination of calcium peroxide N2 - The CaO2 Content ist analyzed using different titration methods. The results and the methods are compared. CaO2 is a reference material in the UN Test method O.3. T2 - EOS IGUS Meeting CY - Brussels, Belgium DA - 21.05.2019 KW - Dangerous Goods KW - UN-Test O.3 KW - Calcium peroxid KW - Content of calcium peroxide PY - 2019 AN - OPUS4-49001 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lüth, Peter A1 - Frost, K. A1 - Kurth, Lutz A1 - Malow, Marcus A1 - Schmidt, Martin A1 - Michael-Schulz, Heike A1 - Uhlig, S. A1 - Zakel, S. T1 - CEQAT-DGHS Ringversuchsprogramm für die Chemikaliensicherheit - Schlussfolgerungen N2 - Die Ursachen für Chemikalienunfälle können vielfältig sein. Prävention beginnt bereits im Prüflabor, wenn Chemikalien auf ihre gefährlichen Eigenschaften getestet werden. Dazu sind Prüfmethoden entwickelt und veröffentlicht worden, die heute weltweit Anwendung finden. Auf die Validität der Prüfmethode und richtige Durchführung der Prüfung im Laboratorium müssen sich Sicherheitsfachkräfte, Transporteure oder Händler verlassen können. Anhand der in den letzten 10 Jahren im Rahmen des CEQAT-DGHS von BAM und PTB durchgeführten Ringversuche (RV) wird gezeigt, dass bei allen bisher untersuchten Prüfmethoden ein Verbesserungsbedarf besteht. Die RV müssen daher zunächst auf die Methodenverbesserung und -validierung abzielen und nicht auf Leistungstests. Das Labormanagement und die praktische Durchführung der Prüfung sind in vielen Laboratorien verbesserungsbedürftig. Der Begriff „Erfahrung der Prüfer“ ist kritisch zu sehen: Eine „lange Erfahrung mit vielen Prüfungen“ ist nicht unbedingt ein Garant für richtige Ergebnisse. T2 - 15. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Braunschweig, Germany DA - 21.05.2019 KW - Gefahrgut KW - Gefahrstoff KW - Ringversuch KW - Prüfmethode KW - Validierung KW - Qualitätssicherung PY - 2019 UR - https://www.ptb.de/cms/index.php?id=18763 DO - https://doi.org/10.7795/210.20190521M SP - 1 EP - 8 PB - Physikalisch-Technische Bundesanstalt (PTB) CY - Braunschweig AN - OPUS4-49489 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lüth, Peter A1 - Frost, K. A1 - Kurth, Lutz A1 - Malow, Marcus A1 - Schmidt, Martin A1 - Michael-Schulz, Heike A1 - Uhlig, S. A1 - Zakel, S. T1 - CEQAT-DGHS Ringversuchsprogramm für die Chemikaliensicherheit – Entwicklung von Verfahren zur Verifizierung der Prüfapparatur am Beispiel der Prüfmethode UN Test N.5 N2 - Prävention beginnt im Prüflabor, wenn Chemikalien auf ihre gefährlichen Eigenschaften getestet werden. Dazu sind Prüfmethoden entwickelt und veröffentlicht worden, die heute weltweit Anwendung finden. Auf die Validität der Prüfmethode und richtige Durchführung der Prüfung im Laboratorium müssen sich Sicherheitsfachkräfte, Transporteure oder Händler verlassen können. Anhand der in den letzten 10 Jahren im Rahmen des CEQAT-DGHS von BAM und PTB durchgeführten Ringversuche (RV) wird gezeigt, dass bei allen bisher untersuchten Prüfmethoden ein Verbesserungsbedarf besteht. Die RV müssen daher zunächst auf die Methodenverbesserung und -validierung abzielen und nicht auf Leistungstests. Das Labormanagement und die praktische Durchführung der Prüfung sind in vielen Laboratorien verbesserungsbedürftig. Der Begriff „Erfahrung der Prüfer“ ist kritisch zu sehen: Eine „lange Erfahrung mit vielen Prüfungen“ ist nicht unbedingt ein Garant für richtige Ergebnisse. Bei der Prüfung der gefährlichen Eigenschaften von Chemikalien sind Referenzmaterialen auf Grund der Instabilität in der Regel nicht verfügbar. Für Prüflaboratorien sind RV daher eine Alternative bei der Qualitätssicherung. RV sind jedoch aufwendig und können nur in relativ großen Zeitabständen durchgeführt werden. Es sind deshalb Verfahren zur Verifizierung z. B. der in den Laboratorien verwendeten Prüfapparaturen zu entwickeln. Die Entwicklung von Verifizierungsverfahren wird am Bespiel der Prüfmethode UN Test N.5 demonstriert. T2 - 15. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Braunschweig, Germany DA - 21.05.2019 KW - Gefahrgut KW - Gefahrstoff KW - Ringversuch KW - Prüfmethode KW - Validierung KW - Qualitätssicherung KW - Verifizierung PY - 2019 UR - https://www.ptb.de/cms/index.php?id=18763 DO - https://doi.org/10.7795/210.20190521E SP - 1 EP - 10 CY - Braunschweig AN - OPUS4-49495 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lüth, Peter A1 - Frost, K. A1 - Kurth, Lutz A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Schmidt, Martin A1 - Schulte, Petra A1 - Uhlig, S. A1 - Zakel, S. T1 - CEQAT-DGHS Interlaboratory Test Programme for Chemical Safety - Need of Test Methods Validation N2 - Safety experts, manufacturers, suppliers, importers, employers or consumers must be able to rely on the validity of safety-related test methods and on correct test results and assessments in the laboratory. Via the eChemPortal lots of data from the REACH registration dossiers are available. However, the quality and correctness of the information remains in the responsibility of the data submitter. Unfortunately, we found more or less appropriate information on physicochemical properties and concluded that more quality or adequacy of any data submitted will be needed. Interlaboratory tests play a decisive role in assessing the reliability of test results. Interlaboratory tests on different test methods have been performed by Bundesanstalt für Materialforschung und –prüfung (BAM) and Physikalisch-Technische Bundesanstalt (PTB) in collaboration with the QuoData GmbH during the last 10 years. Significant differences between the results of the participating laboratories were observed in all interlaboratory tests. The deviations of the test results were not caused only by laboratory faults but also by deficiencies of the test method. In view of the interlaboratory test results the following conclusions can be drawn: • To avoid any discrepancy on classification and labelling of chemicals it should become state of the art to use validated test methods and the results accompanied by the measurement uncertainty. • A need for improvement is demonstrated for all examined test methods. Thus, interlaboratory tests shall initially aim at the development, improvement and validation of the test methods and not on proficiency tests. • The laboratory management and the practical execution of the tests need to be improved in many laboratories. • The term "experience of the examiner" must be seen critically: A "long experience with many tests" is not necessarily a guarantee for correct results. T2 - 16th International Symposium on Loss Prevention and Safety Promotion in the Process Industries and accompanying exhibition. Loss prevention 2019 CY - Delft, The Netherlands DA - 16.06.2019 KW - Dangerous goods KW - Hazardous substances KW - Round robin test KW - Interlaboratory comparison KW - Test method KW - Validation KW - Quality assurance PY - 2019 UR - https://www.aidic.it/cet/19/77/001.pdf SN - 978-88-95608-74-7 DO - https://doi.org/10.3303/CET1977001 SN - 2283-9216 VL - 77 SP - 1 EP - 6 PB - Italian Association of Chemical Engineering AN - OPUS4-49496 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Léonard, Fabien A1 - Zhang, Zhen A1 - Malow, Marcus A1 - Bruno, Giovanni T1 - 3D characterisation of ammonium nitrate powders by X-ray computed tomography N2 - The mixture of ammonium nitrate (AN) prills and fuel oil (FO), usually called ANFO, is extensively used in the mining industry as a bulk industrial explosive. One of the major performance predictors of ANFO mixtures is the fuel oil retention, which is itself governed by the porosity of the AN prills. Standardised tests routinely used to assess oil retention face several important limitations; the first being the difficulty to cover the wide range of porosity contents and morphologies from different types of ammonium nitrate prills; the second being the inability to evaluate the closed porosity, which is an important factor regarding the sensitivity of the explosive to detonation. In this study, we present how X-ray computed tomography (XCT), and the associated advanced data processing workflow, can be used to fully characterise the structure and morphology of AN prills. We show that structural parameters such as volume fraction of the different phases and morphological parameters such as specific surface area and shape factor can be reliably extracted from the XCT data, and that there is a good agreement with the measured oil retention values. XCT can therefore be employed to non-destructively and accurately evaluate and characterise porosity in ammonium nitrate prills. T2 - 23rd Seminar on New Trends in Research of Energetic Materials CY - Meeting was canceled DA - 01.04.2020 KW - Ammonium nitrate KW - Prill KW - Non-destructive characterisation KW - Porosity KW - Specific surface area PY - 2020 SP - 163 EP - 171 AN - OPUS4-51272 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -