TY - CONF A1 - Malow, Marcus T1 - Der Einfluss hohen Umgebungsdrucks auf Deflagrationen N2 - Das Deflagrationsverhalten von Feststoffen unter atmosphärischen Bedingungen wurde in der Vergangenheit eingehend untersucht. Standardmäßig wird die Deflagrationsprüfung in einem offenen System durchgeführt. Aber auch in geschlossenen Systemen ist die Deflagrationsprüfung durchführbar und sie liefert Ergebnisse, die mit den Standardmethoden vergleichbar sind. Darüber hinaus bietet die Prüfung in einem geschlossenen System den Vorteil, nicht nur die Temperatur, sondern auch den Druck messen und für die Beschreibung des Deflagrationsverlaufs heranziehen zu können. Auch für die Prüfung in geschlossenen Systemen liegt eine Reihe an experimentellen Ergebnissen vor. Von Klais wurde veröffentlicht, dass die Deflagrationsgeschwindigkeit, beschrieben anhand der Druckanstiegsrate, mit steigendem Druck ansteigt. Vor dem Hintergrund dieser experimentellen Beobachtung wurde interpretiert, dass die Steigerung der Geschwindigkeit ihre Ursache im steigenden Umgebungsdruck findet. Es wurde weiter versucht, einen funktionalen Zusammenhang zwischen Umgebungsdruck und Deflagrationsgeschwindigkeit, ausgedrückt durch die Druckanstiegsrate, herzustellen. Dabei wurde nicht beachtet, dass neben dem Umgebungsdruck noch andere Einflussfaktoren auf die Deflagrationsgeschwindigkeit gegeben sind. Wesentlich ist hierbei die für die Reaktion zur Verfügung stehende Oberfläche, die sich bei einer lokalen, punktförmigen Anzündung mit fortschreitender Reaktionszeit vergrößert. In diesem Beitrag wird der Einfluss des Umgebungsdrucks auf die Deflagrationsgeschwindigkeit systematisch untersucht. Zu diesem Zweck wurden Experimente bei verschiedenen Ausgangsdrücken bis zu 50 bar (abs) durchgeführt. Der Anfangsdruck, also der Druck der vor Beginn eines Experiments im Reaktionsraum herrscht, wurde schrittweise von einem Experiment zum nächsten erhöht. Für die Versuchsreihen wurden zwei Substanzen verwendet: Azodicarbonamid und ein Imidazolderivat. Diese unterscheiden sich in ihrem Deflagrationsverhalten und hinsichtlich der Gasmengenentwicklung. Die durchgeführten Experimente haben gezeigt, dass die Deflagrationsgeschwindigkeit mit steigendem Druck zunimmt. Sowohl die Druckanstiegsrate, als auch die lineare Ausbreitungsrate sind ein gutes Maß dafür. Zwischen den beiden Kenngrößen besteht ein linearer Zusammenhang. Für eine gegebene Geometrie lässt sich die eine Kenngröße aus der anderen berechnen. T2 - 5. Brand- und Explosionsschutztage CY - Magdeburg, Germany DA - 23.03.2017 KW - Deflagrationen KW - Geschlossenes System KW - Azodicarbonamid KW - Druckanstiegsrate KW - Deflagrationsgeschwindigkeit PY - 2017 AN - OPUS4-39921 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - RRT O.2/O.3 – Results of BAM N2 - During the last couple of years BAM took part in different Round Robin Tests for the determination of oxidative properties of liquid and solid substances. The obtained results from these tests are reviewed and discussed in this presentation. New findings from recent particle size distribution measurements were discussed as well. N2 - Über die letzten Jahre hat die BAM an verschiedenen Round Robin Tests zur Bestimmung der oxidativen Eigenschaften von flüssigen und festen Stoffen teilgenommen. Die Ergebnisse werden diskutiert sowie zusätzliche Messungen zur Bestimmung der Partikelgrößenverteilung der verwendeten Cellulosen vorgestellt. T2 - IGUS EOS Meeting CY - Basel, Switzerland DA - 11.04.2016 KW - O.2 Test PY - 2016 AN - OPUS4-37191 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - Determination and simulation of SADT for packages, IBCs and tanks N2 - Die Konzepte zur Bestimmung der SADT für verschiedene Transportgebindegrößen werden an drei Beispielen aus der Praxis erläutert. Insbesondere wird auf die Problematik der Bestimmung der SADT für große Tranportgebinde eingegangen. Verschiedene Simulationsmethoden für die Berechnung der SADT werden vorgestellt. T2 - IGUS EOS/EPP Joint Meeting CY - Basle, Switzerland DA - 13.04.2016 KW - SADT KW - Test series H KW - Test series 8 PY - 2016 AN - OPUS4-36848 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - Thermische Zersetzung von AIBN – Experimente und Simulationen zur Bestimmung der SADT N2 - Die thermische Zersetzung von AIBN wurde in einem Projekt mit mehreren Teilnehmern untersucht. Hierbei wurde die selbstbeschleunigende Zersetzungstemperatur (SADT) sowohl experimentell als auch auf Grundlage von Simulationsrechnungen bestimmt. Die Besonderheit bei dem Feststoff AIBN ist, dass die Zersetzung sowohl in der festen, als auch in der flüssigen Phase nach dem Schmelzen stattfindet, was bei den durchgeführten Simulationsrechnungen berücksichtigt werden musste. Die berechneten SADT-Werte stimmen mit den experimentell bestimmten sehr gut überein. T2 - 14. BAM-PTB-Kolloquium zur chemischen und physikjalischen Sicherheitstechnik CY - Berlin, Germany DA - 14.06.2016 KW - SADT KW - Reaktionskinetik KW - AIBN KW - DSC KW - UN-Test H.1 KW - UN-Test H.4 PY - 2016 AN - OPUS4-37256 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Salg, Steffen A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Schomäcker, R. T1 - Evaluation of deflagration behaviour using different sized autoclaves N2 - Deflagration tests were conducted with two kinds of autoclaves. Parameter studies were carried out concerning the gas atmosphere and substances used. Deflagration tests were performed in different pressure regions. Furthermore, deflagration test results of different substances were compared to the corresponding DSC results. Previous findings concerning vacuum conditions could be approved for a greater range of substances. In addition, investigations in nitrogen atmosphere were performed in order to investigate the deflagration behaviour. Experiments up to 161 bar could be utilized. An acceleration of deflagration velocity with increasing pressure was observed in a large pressure interval. T2 - 15th International Symposium of Loss Prevention and Safety Promotion CY - Freiburg, Germany DA - 05.06.2016 KW - Deflagration KW - Closed Vessel KW - Autoclave KW - Effect of Pressure PY - 2016 SN - 978-88-95608-39-6 DO - https://doi.org/10.3303/CET1648033 SN - 2283-9216 VL - 48 SP - 193 EP - 198 PB - Associazione Italiana di Ingegneria Chimica CY - Milano AN - OPUS4-37259 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Duerrstein, St. A1 - Kappler, C A1 - Neuhaus, I. A1 - Gödde, M. T1 - Model-Based Prediction of the Adiabatic Induction Period and SADT of Dicumyl Peroxide Solution and Comparison to Large-Scale Experiments Performed Using 216.5-Liter Steel Drums in the UN-Test H.1 N2 - The thermal decomposition of dicumyl peroxide dissolved in ethylbenzene has been studied in our laboratories using differential scanning calorimetry (DSC), calvet calorimetry (C80), adiabatic calorimetry, reaction calorimetry and micro calorimetry. Based on the DSC and C80 experiments a formal kinetics model has been derived, which was compared to the other applied techniques. Finally we used our model to predict the thermal response of 216.5 L steel drums to exposure to constant elevated temperatures, both using the stationary Semenov approach as well as time-resolved CFD simulations. The prediction was compared to one-to-one testing using the UN-Test H.1. The observed level of consistency between model and experiments is remarkably good. The comparison with the 216.5 L testing clearly demonstrates that reliable and conservative predictions for technically relevant scales are possible as long as a validated model is used. T2 - 15th International Symposium of Loss Prevention and Safety Promotion in the Process Industries CY - Freiburg, Germany DA - 05.06.2016 KW - Thermal decomposition KW - Self-accelerating decomposition temperature KW - Dicumyl peroxide KW - CFD simulations KW - Real scale FST PY - 2016 SN - 978-88-95608-39-6 DO - https://doi.org/10.3303/CET1648080 SN - 2283-9216 VL - 48 SP - 475 EP - 480 PB - AIDIC CY - Freiburg AN - OPUS4-37875 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Salg, Steffen A1 - Wehrstedt, Klaus-Dieter A1 - Michael-Schulz, Heike A1 - Malow, Marcus A1 - Schomäcker, R. T1 - Die Deflagration von Azodicarbonamid unter verschiedenen Umgebungsbedingungen N2 - Azodicarbonamid (ADCA) ist ein bekanntermaßen deflagrationsfähiger Stoff, der in der Kunststoffindustrie als Treib- und Blähmittel eingesetzt wird. In diesem Beitrag wird die Deflagration von ADCA unter verschiedenen Bedingungen betrachtet. Es werden Ergebnisse von Experimenten in offenen und geschlossenen Systemen präsentiert. In geschlossenen Systemen wurde die Zusammensetzung der umgebenden Atmosphäre von Luft mit Umgebungsdruck über Luft mit Unter- und Überdruck hin zu Stickstoff mit Umgebungsdruck variiert. Um das Deflagrationsrisiko zu reduzieren wird eine Verarbeitung von ADCA im Vakuum vorgeschlagen. T2 - 14. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Berlin, Germany DA - 14.06.2016 KW - Deflagration KW - geschlossene Behälterprüfung PY - 2016 SN - 978-3-9817853-5-7 SN - 0938-5533 SP - 118 EP - 125 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-37877 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Mishra, Kirti Bhushan A1 - Steinbach, J. T1 - Thermische Zersetzung von AIBN - Experimente und Simulationen zur Bestimmung der SADT N2 - Die thermische Zersetzung von AIBN wurde in einem Projekt mit mehreren Teilnehmern untersucht. Hierbei wurde die selbstbeschleunigende Zersetzungstemperatur SADT) sowohl experimentell als auf Grundlage von Simulationsrechnungen bestimmt. Die Besonderheit bei dem Feststoff AIBN ist, dass die Zersetzung sowohl in der festen, als auch in der flüssigen Phase nach dem Schmelzen stattfindet, was bei den durchgeführten Simulationsrechnungen berücksichtigt werden musste. Die berechneten SADT Werte stimmen mit den experimentell bestimmten sehr gut überein. T2 - 14. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Berlin, Germany DA - 14.06.2016 KW - SADT KW - Reaktionskinetik KW - AIBN KW - DSC KW - UN-Test H.1 KW - UN-Test H.4 PY - 2016 SN - 978-3-9817853-5-7 SN - 0938-5533 SP - 54 EP - 59 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-37878 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Manolov, Manol T1 - Thermal decomposition of AIBN Part A: Decomposition in real scale packages and SADT determination N2 - In this paper the thermal decomposition of 2,2′-azobisisobutyronitrile (AIBN) was investigated in real scale packages of different sizes and in 500 mL Dewar vessels. Packages containing 5 kg, 20 kg and 50 kg of AIBN have been investigated according to the UN test H.1 method and the 500 mL Dewar experiments were performed according to the UN test H.4 method. The self-accelerating decomposition temperature (SADT) was determined for the different masses and for the 500 mL Dewar vessel. Additionally, DSC curves have been recorded in closed crucibles. All these experimental data are the basis of a series of forthcoming papers dealing with the simulation of the SADT for different masses using reliable kinetic data. PY - 2015 DO - https://doi.org/10.1016/j.tca.2015.06.013 SN - 0040-6031 SN - 1872-762X VL - 621 SP - 1 EP - 5 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-35010 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Salg, Steffen A1 - Michael-Schulz, Heike A1 - Malow, Marcus T1 - Use of a four-liter-autoclave for conducting deflagration tests N2 - For the determination of deflagration capability of energetic substances, the test methods according to VDI 2263-1, part 1.6 and UN-Manual, C.1- und C.2-test are used. These methods are suited to evaluate the intrinsic material property deflagration. For evaluation of deflagration behavior in closed systems, for example in production sites, an appropriate test apparatus is missing. Because of this, the BAM Federal Institute for Materials Research and Testing developed a four-liter-autoclave for conducting the deflagration test under isochoric conditions. Deflagration behavior was evaluated under different parameters e. g. pressure and temperature. On the basis of results it can be seen, that the four-liter-autoclave is suited for the determination of deflagration behavior. On the one hand, the same characteristics as in the standard test methods are obtained. On the other hand, there are additional characteristics, like pressure rise and decomposition velocity. On the basis of pressure measurement, the emerging gas volume and the rate of gas evolution, that are used to design protection measures, can be estimated. The measurements are conducted with the deflagrating substance Azodicarboxamide (ADCA). It is concluded that the four-liter-autoclave is a good alternative for conducting deflagration tests. T2 - 18th Seminar on new trends in research of energetic materials - NTREM CY - Pardubice, Czech Republic DA - 15.04.2015 KW - Deflagration KW - Azodicarboxamide KW - Closed vessel KW - Pressure rise KW - Arising gases PY - 2015 UR - http://www.ntrem.com/download/NTREM_2015_abstracts.pdf SN - 978-80-7395-891-6 SN - 978-80-7395-892-3 SP - 255 EP - 264 AN - OPUS4-33490 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Salg, Steffen A1 - Malow, Marcus A1 - Morhenn, H. T1 - Experimentelle und theoretische Untersuchung des Zersetzungsmechanismus deflagrationsfähiger Substanzen N2 - In einem Vier-Liter-Autoklaven wurden erstmals Untersuchungen zu Deflagrationen von Azodicarbonamid durchgeführt. Aus den Arbeiten lässt sich folgern, dass der Vier-Liter-Autoklav zur Bestimmung und Beschreibung der Deflagrationsfähigkeit von Azodicarbonamid gut geeignet ist und im Vergleich zu Messungen inoffenen Prüfanordnungen eine Reihe von Vorteilen bietet. KW - Deflagration KW - Geschlossener Behälter KW - Autoklav KW - Gas- und Druckmengenmessung PY - 2015 SN - 2191-0073 VL - 5 IS - 6 SP - 39 EP - 44 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-33491 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - A new apparatus for the investigaton of deflagrations T2 - IGUS EOS meeting CY - Ottawa, Canada DA - 2015-05-06 PY - 2015 AN - OPUS4-33378 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - UN Test N.5 - new test results T2 - IGUS EOS meeting CY - Ottawa, Canada DA - 2015-05-06 PY - 2015 AN - OPUS4-33379 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - Use of four-liter-autoclave for conducting deflagration tests T2 - New Trends in Reseach of Energetic Materials CY - Pardubice, the Czech Republic DA - 2015-04-15 PY - 2015 AN - OPUS4-33382 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - Suitable diluents for the group of desensitized explosives? N2 - The question, what is a suitable diluent for the group of desensitized explosives, is adressed in this presentation. After a review of the definions from the corresponding regulations a possible testing scheme is presented and discussed. It should only be possible to test a phlegmatized explosive out of class 1 via a negative result in test series 6. The characteristics of a suitable diluent is discussed in the second part of the presentation. T2 - IGUS EOS Meeting CY - Rijswijk, The Netherlands DA - 24.04.2017 KW - Desensitized explosives KW - Test series 6 PY - 2017 AN - OPUS4-41986 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Noll, Matthias A1 - Ferrero, Fabio A1 - Naumann, Annette A1 - Malow, Marcus T1 - Entwicklung von pilzlichen und bakteriellen Lebensgemeinschaften in einer Kiefernholzhalde N2 - Das Interesse für erneuerbare Energieträger ist in den letzten Jahren stark angestiegen. Im Bereich Biomasse als erneuerbarer Energieträger wird besonders Holz ein großes Wachstum auf dem Energiesektor prognostiziert (NITSCH 2007). Die Speicherung dieser Energie erfolgt meist durch Holzhackschnitzelhalden in der Umwelt. Um ein tieferes Verständnis der in der Halde ablaufenden mikrobiologischen Prozesse erhalten zu können, wurden in einer neu aufgebauten Kiefernholzhackschnitzelhalde mit den Ausmaßen 15 m x 20 m x 6 m folgende Messungen durchgeführt: a.) Messung der Gaskonzentration von Sauerstoff, Kohlendioxid als auch der Temperaturentwicklung innerhalb der Halde; b.) Messung der Veränderung der Holzzusammensetzung innerhalb der Halde über die Zeit; c.) Charakterisierung der Veränderung der Zusammensetzung der bakteriellen als auch der pilzlichen Lebensgemeinschaften über die Zeit; d.) Charakterisierung von dominanten Vertretern der bakteriellen als auch der pilzlichen Lebensgemeinschaften. Die Ergebnisse zeigen, dass sich die Funktion und die Zusammensetzung der Lebensgemeinschaften über die Dauer der Holzhackschnitzellagerung ändern, und dass diese Änderungen nur zum Teil mit den Prozessen bei Kompostierungsanlagen vergleichbar sind. T2 - Experten Workshop "Lagerung von Holzhackschnitzeln" CY - Potsdam-Bornim, Deutschland DA - 2008-06-18 KW - Ascoymceten KW - Pseudomonas KW - Bakterien KW - Pilze KW - Temperatur KW - Pilzliche und bakterielle Lebensgemeinschaften PY - 2008 SN - 0947-7314 IS - 63 SP - 58 EP - 72 CY - Potsdam AN - OPUS4-18645 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - Modified Setup of 20-L-Sphere of Determination of Safety Characteristics of Nano Powders T2 - 17th CY - Tokyo, Japan DA - 2010-05-26 PY - 2010 AN - OPUS4-21364 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - Center for quality assurance for testing of dangerous goods and hazardous substances - Brief information about status and activities T2 - IGUS ENERGETIC AND OXIDISING SUBSTANCES WORKING GROUP CY - Tokyo, Japan DA - 2010-05-26 PY - 2010 AN - OPUS4-21344 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - Problems encountered comparing UN-Test H.2 und UN-Test H.4 results T2 - IGUS Energetic and Oxidising Substances (EOS) Working Group Meeting CY - Tokyo, Japan DA - 2010-05-26 PY - 2010 AN - OPUS4-21361 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - DSC: Thermal stability of dilauroylperoxide T2 - IGUS Energetic and Oxidising Substances (EOS) Working Group Meeting CY - Tokyo, Japan DA - 2010-05-26 PY - 2010 AN - OPUS4-21362 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ferrero, Fabio A1 - Malow, Marcus A1 - Berger, Anka A1 - Noll, Matthias T1 - Brandvermeidung bei der Lagerung von biogenen Brennstoffen am Beispiel von Kiefernholz T2 - Experten Workshop "Lagerung von Holzhackschnitzeln" CY - Potsdam-Bornim, Deutschland DA - 2008-06-18 KW - Selbstentzündung KW - Brandverhütung KW - Lagerung KW - Biomasse KW - Schüttgüter PY - 2008 SN - 0947-7314 IS - 63 SP - 32 EP - 44 CY - Potsdam AN - OPUS4-19043 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ferrero, Fabio A1 - Lohrer, Christian A1 - Schmidt, Bernd A1 - Noll, Matthias A1 - Malow, Marcus T1 - A mathematical model to predict the heating-up of large-scale wood piles N2 - A mathematical model to predict the heating-up in open air wood chip piles has been developed. This model includes the heat production from chemical, physical and microbial exothermal processes. In the manuscript the laboratory experiments needed to develop and validate the model are described. In addition, temperature and gas concentrations were measured in two large-scale wood piles (volumes bigger than 1000 m³), in order to provide the applicability of the model to large-scale scenarios. The predictions of the model and the large-scale experimental data showed good agreement concerning the maximum temperature reached inside an open air wood pile. Special attention has been devoted to the microbial processes, since they proved to be the most important cause of heat production in the early stages of storage. This work is intended to help in predicting and thus avoiding possible self-ignition scenarios for this type of wood storage. KW - Wood chips KW - Storage KW - Self-ignition KW - Numerical simulation KW - Large-scale piles KW - Biomass PY - 2009 DO - https://doi.org/10.1016/j.jlp.2009.02.009 SN - 0950-4230 SN - 1873-3352 VL - 22 SP - 450 EP - 459 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-19200 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - Evaluative comparison of two methods for sadt determination (UN H.1 and H.4) T2 - 12th Annual Symposium, Mary Kay O'Connor Process Safety Center "Beyond Regulatory Compliance: Making Safety Second Nature" Texas A&M University CY - College Station, TX, USA DA - 2009-10-27 PY - 2009 AN - OPUS4-20232 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Wehrstedt, Klaus-Dieter T1 - Evaluative comparison of two methods for SADT determination (UN H.1 and H.4) N2 - We present our results on the comparsion of two methods for the SADT determination. Both methods, UN test H.1 and UN test H.4 are recommended by the international transport regulations from the UN. But during the last years the applicability of the UN test H.4 has been questioned for solid substances. Therefore, three organic peroxidesand one self-reactive substance have been investigated in 5 kg and 20 kg packages as well as in the UN test H.4 in a 500 mL dewar vessel. The SADT values determined with the different methods match. The UN test H.4 seems to be well suited also for solid substances at least for 20 kg or 60 L. T2 - 12th Annual symposium, Mary Kay O´Connor Process Safety Center "Beyond regulatory compliance: making safety second nature" CY - College Station, Texas, USA DA - 2009-10-27 KW - Thermal explosion KW - Organic peroxides KW - Self-reactive substances KW - SADT KW - Heat accumulation storage test KW - US SADT test PY - 2009 SN - 978-0-692-00459-3 IS - Chapter "Explosion - I" SP - 230 EP - 237 AN - OPUS4-20277 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - Sind DSC Experimente geeignet, um die thermische Stabilität von Dilauroylperoxid vorherzusagen? T2 - 10. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-22369 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Martin A1 - Ferrero, Fabio A1 - Malow, Marcus A1 - Krause, Ulrich T1 - Vermeidung der Brandentstehung bei der Lagerung von Biomasse T2 - VDI-Fachtagung - Sichere Handhabung brennbarer Stäube CY - Nürnberg, Deutschland DA - 2010-11-16 KW - Selbstentzündung KW - Biomasse KW - Numerische Simulation KW - Brandvermeidung PY - 2010 SN - 978-3-18-092096-2 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 2096 SP - 87 EP - 98 AN - OPUS4-22501 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Wehrstedt, Klaus-Dieter T1 - Evaluative comparison of two methods for SADT determination (UN H.1 and H.4) N2 - We present our results on the comparison of two methods for the SADT determination. Both methods, UN test H.1 and UN test H.4 are recommended by the international transport regulations from the UN. But during the last years the applicability of the UN test H.4 has been questioned for solid substances. Therefore, three organic peroxides and one self-reactive substance have been investigated in 5 kg and 20 kg packages as well as in the UN test H.4 in a 500 mL Dewar vessel. The SADT values determined with the different methods match. The UN test H.4 seems to be well suited for solid organic peroxides and self-reactive substances of at least 20 kg or 60 L. KW - Thermal explosion KW - Organic peroxides KW - Self-reactive substances KW - SADT KW - Heat accumulation storage test KW - US SADT test PY - 2010 DO - https://doi.org/10.1016/j.jlp.2010.06.014 SN - 0950-4230 SN - 1873-3352 VL - 23 IS - 6 SP - 740 EP - 744 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-22640 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wehrstedt, Klaus-Dieter A1 - Malow, Marcus T1 - Letter to the Editor - Comments on the "Letter to the editor" by M.-L. You and C.-M. Shu (Journal of Thermal Analysis and Calorimetry, 2010;100:367-369) as response to the "Letter to the editor" by M. Malow and K.-D. Wehrstedt (Journal of Thermal Analysis and Calorimetry, 2009;98:885-886) KW - Dilauroyl peroxide KW - Oxygen balance KW - DSC KW - Simulation KW - SADT PY - 2011 DO - https://doi.org/10.1007/s10973-010-1122-0 SN - 1388-6150 SN - 1418-2874 SN - 0368-4466 SN - 1572-8943 VL - 103 IS - 1 SP - 409 EP - 410 PB - Kluwer Academic Publ. CY - Dordrecht AN - OPUS4-23210 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - Validation of the UN test method N.5 T2 - IGUS EOS Meeting CY - Washington, D.C., USA DA - 2011-04-27 PY - 2011 AN - OPUS4-23643 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - Simulated 50 kg package for SADT testing T2 - IGUS EOS Meeting CY - Washington, D.C., USA DA - 2011-04-27 PY - 2011 AN - OPUS4-23647 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - Problems with formulations containing sodium carbonate peroxyhyrate T2 - IGUS EOS Meeting CY - Washington, D.C., USA DA - 2011-04-27 PY - 2011 AN - OPUS4-23648 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - UN test series H - current project of BAM T2 - IGUS Energetic and Oxidising Substances (EOS) Working Group Meeting CY - Stockholm, Sweden DA - 2008-05-14 PY - 2008 AN - OPUS4-17471 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Noll, Matthias A1 - Schmidt, Bernd A1 - Malow, Marcus A1 - Schmidt, Martin T1 - Experimentelle und numerische Analyse des Selbstentzündungsverhalten von Holzhalden T2 - 9. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Deutschland DA - 2008-11-06 KW - Brandvermeidung KW - Biomasse KW - Lagerung KW - Schüttgüter KW - Selbstentzündung PY - 2008 SN - 978-3-89746-099-7 SP - 1 EP - 21 PB - VDI, Hallescher Bezirksverein CY - Halle AN - OPUS4-18305 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - UN test H.1 - some new experimental results T2 - IGUS Energetic and Oxidising Substances (EOS) Working Group Meeting CY - Saint Petersburg, Russia DA - 2009-06-10 PY - 2009 AN - OPUS4-19500 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter T1 - Comments on "Thermal explosion and runaway reaction simulation of lauroyl peroxide by DSC tests, by Mei-Li You, Ming-Yang Liu, Sheng-Hung Wu, Jen-Hao Chi, Chi-Min Shu" (Journal of Thermal Analysis and Calorimetry, 2009;96:777-782) KW - Lauroyl peroxide KW - Thermal analysis KW - DSC KW - Kinetics PY - 2009 DO - https://doi.org/10.1007/s10973-009-0534-1 SN - 1388-6150 SN - 1418-2874 SN - 0368-4466 SN - 1572-8943 VL - 98 IS - 3 SP - 885 EP - 886 PB - Kluwer Academic Publ. CY - Dordrecht AN - OPUS4-20791 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Malow, Marcus A1 - Ferrero, Fabio A1 - Noll, Matthias ED - Mahammadzadeh, M. ED - Biebeler, H. ED - Bardt, H. T1 - Brandvermeidung bei der Lagerung von Biomasse KW - Brandvermeidung KW - Selbstentzündung KW - Biomasse PY - 2009 SN - 978-3-602-14847-9 IS - Kap. 13 SP - 107 EP - 114 CY - Köln AN - OPUS4-20811 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wehrstedt, Klaus-Dieter A1 - Adams, W. D. A1 - Mak, W. A1 - Malow, Marcus A1 - Kumasaki, M. T1 - Report about the IGUS EOS meeting 2010 in Tokyo KW - IGUS KW - EOS KW - Organic peroxides KW - Self-reactive substances KW - Energetic materials KW - Test methods KW - Oxidizers KW - Ammonium nitrate KW - Fertilizers PY - 2010 SN - 0570-4480 N1 - Sprachen: Japanisch/Englisch - Languages: Japanese/English VL - 49 IS - 4 SP - 240 EP - 243 CY - Tokyo, Japan AN - OPUS4-21942 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Noll, Matthias A1 - Naumann, Annette A1 - Ferrero, Fabio A1 - Malow, Marcus T1 - Exothermic processes in industrial-scale piles of chipped pine-wood are linked to shifts in gamma-, alphaproteobacterial and fungal ascomycete communities N2 - Fast growing softwood species such as pine are preferred for biomass-based heat as well as electricity production and stored in large quantities. A newly established outdoor pile of freshly cut pine-wood chips was monitored to analyze exothermic processes. Inside the pile, a mean temperature increase of up to 44 °C was measured after six days of piling which was paralleled by a decrease of O2-concentration and an increase of CO2-concentration. Thereafter four additional CO2 maxima were observed, while O2-concentration remained at ambient concentration. The fungal community structure remained almost unchanged after four weeks, while the bacterial community structure was characterized by continuous shifts over time. The rapid heating in the early stage of storage corresponded to high relative abundance of microbial strains belonging to the genera Pseudomonas, Luteibacter and Caulobacter, ascomycetous genera Sphaeropsis and Cadophora and basidiomycetous order Polyporales and genus Sistotremastrum. The late stage was composed by a broader diversity of microorganisms, and heating processes inside the wood pile were attributed mainly to physicochemical processes. Taken together, these observations suggest that the early bacterial and fungal communities are key players in exothermic processes and were replaced by a broader diversity of highly adapted microorganisms. KW - 16S rRNA gene KW - Bacteria KW - Fungi KW - Pine-wood storage KW - T-RFLP KW - Self-heating KW - Succession KW - ITS PY - 2010 DO - https://doi.org/10.1016/j.ibiod.2010.07.002 SN - 0964-8305 VL - 64 IS - 7 SP - 629 EP - 637 PB - Elsevier CY - Barking AN - OPUS4-22013 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Krause, Ulrich A1 - Wehrstedt, Klaus-Dieter T1 - Some comments on the paper of H. Fierz: Influence of heat transport mechanisms on transport classification by SADT-measurement as measured by the Dewar-method PY - 2003 DO - https://doi.org/10.1016/S0304-3894(03)00221-8 SN - 0304-3894 VL - 103 SP - 169 EP - 173 PB - Elsevier CY - Amsterdam AN - OPUS4-2687 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Steensma, M. A1 - Schuurman, P. A1 - Malow, Marcus A1 - Krause, Ulrich A1 - Wehrstedt, Klaus-Dieter T1 - Evaluation of the validity of the UN SADT H.4 test for solid organic peroxides and self-reactive substances N2 - Many self-accelerating decomposition temperatures (SADTs) of solid organic peroxides and self-reactive substances have been determined with the UN test method H.4, which is a scaled down test in a small Dewar vessel. For solid organic peroxides and solid self-reactive substances Fierz has questioned this procedure in a recent paper. Fierz concluded that the Dewar test results should not be extrapolated to beyond 8 l packages, owing to the thermal insulation value of solids. On the other hand, long term experience with the test, with a great variety of solid organic peroxides and self-reactive substances show about equal critical temperatures in the small Dewar vessel and on 50 kg scale. In the present work, we first checked, by numerical simulations, the Dewar scale versus the larger scale, in a way comparable with Fierz’ method: both scales are simulated by spheres, consisting of a number of annular layers, for the large scale the usual external heat loss term is used but for the small scale the outside heat transfer is strongly limited. The outcome of these simulations, covering a variety of physical parameters, supports the concerns expressed by Fierz. After this, we performed accurate cooling and heating experiments with solid organic peroxide in the usual Dewar vessel, provided with a large set of thermocouples. The results of these experiments showed that the simulation model for the Dewar vessel has to be changed from a spherical analogue to a short cylinder of solid material with heat exchange mainly via its top (Utop 3.5 W/(m2 K), overall heat transfer coefficient) and some heat exchange (Uside 0.29 W/(m2 K)) through its cylindrical and bottom part. With this “modified cylinder” model (being neither an infinitely long cylinder nor a slab) of the Dewar vessel, we found that the UN method H.4 enables an accurate prediction of the SADT, with small deviations of 0 ± 2.5 °C. Further, by performing a truly three-dimensional (3D) finite element calculation in FEMLAB, the new heat characteristics of the Dewar vessel as well as a 50 kg package of dilauroyl peroxide, a solid organic peroxide, were checked. The outcome was compared with the critical ambient temperatures known for various package sizes, which agreed well. KW - SADT of solids KW - Transport regulations KW - UN H.4 test (HAST) KW - Numerical simulations KW - Scale-up procedure PY - 2005 DO - https://doi.org/10.1016/j.jhazmat.2004.09.028 SN - 0304-3894 VL - 117 IS - 2-3 SP - 89 EP - 102 PB - Elsevier CY - Amsterdam AN - OPUS4-5604 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Lohrer, Christian A1 - Krause, Ulrich T1 - Selbstentzündung von Stäuben und Schüttgütern bei vermindertem Sauerstoffgehalt PY - 2002 UR - http://www3.interscience.wiley.com/journal/91014775/issue SN - 0009-286X SN - 1522-2640 VL - 74 IS - 12 SP - 1 EP - 6 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-5993 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter T1 - Prediction of the self-accelerating decomposition temperature (SADT) for liquid organic peroxides from differential scanning calorimetry (DSC) measurements N2 - We present a prediction (estimation, calculation, screening) method for the estimation of the self-accelerating decomposition temperature (SADT) for liquid organic peroxides from differential scanning calorimetry (DSC) measurements based on the concepts of thermal explosion theory originally introduced by Semonov which are adopted to our problem assuming nth-order reaction kinetics. For the peroxides under investigation, we demonstrate good agreement with the experimental SADT. This method can be used as a quick and easy applicable method for the estimation of the critical temperatures. KW - Organic peroxides KW - Differential scanning calorimetry (DSC) KW - Self-accelerating decomposition temperature (SADT) PY - 2005 DO - https://doi.org/10.1016/j.jhazmat.2004.12.040 SN - 0304-3894 VL - 120 IS - 1-3 SP - 21 EP - 24 PB - Elsevier CY - Amsterdam AN - OPUS4-7308 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lohrer, Christian A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Krause, Ulrich A1 - Steinbach, J. T1 - Einfluss von Feuchte und Konvektionsströmung auf das Selbstentzündungsverhalten von Feststoffschüttungen KW - Selbstentzündung KW - Konvektion KW - Feuchte PY - 2005 DO - https://doi.org/10.1002/cite.200590078 SN - 0009-286X SN - 1522-2640 VL - 77 IS - 8 SP - 1141 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-10847 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Krause, Ulrich T1 - The overall activation energy of the exothermic reactions of thermally unstable materials N2 - The exothermic reactions of thermally unstable materials have been studied using self-heating methods in a wire-mesh-reactor as well as temperature-programmed methods utilizing a differential scanning calorimeter (DSC). Samples of lignite coal dust, cork dust, detergent powder and riboflavin (vitamin B2) were investigated. The overall activation energy E could be determined for each method. For lignite coal and cork dust all techniques show very nice agreement in E. For the detergent powder, the values are comparable except for the heat-release (HR) rate method value which is about 50–60 kJ/mol higher. Riboflavin on the other hand shows a different behaviour. The DSC-experiments lead to values being significantly higher compared to the self-heating values. The existing differences are clearly worked out. KW - Overall activation energy KW - Decomposition reactions KW - Self-heating KW - DSC PY - 2004 DO - https://doi.org/10.1016/j.jlp.2003.09.002 SN - 0950-4230 SN - 1873-3352 VL - 17 IS - 1 SP - 51 EP - 58 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-4973 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - The overall activation energy of the exothermic rections of thrmally unstable materials T2 - 4th International Seminar on Fire and Explosion Hazards CY - Londonderry, Northern Ireland DA - 2003-09-08 PY - 2003 AN - OPUS4-3935 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - Is the UN H.4 test a suitable test to determine the SADT for solids in a 50 kg packaging or not? T2 - Meeting TNO/BAM CY - Rijswijk, Netherlands DA - 2003-09-18 PY - 2003 AN - OPUS4-3936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Krause, Ulrich T1 - Anwendbarkeit des UN SADT H.4-Tests für feste organische Peroxide KW - Selbstentzündung KW - Peroxide PY - 2005 DO - https://doi.org/10.1002/cite.200590196 SN - 0009-286X SN - 1522-2640 VL - 77 IS - 8 SP - 1122 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-11572 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - Anwendbarkeit des UN SADT H.4-Tests für feste organische Peroxide T2 - GVC/DECHEMA-Jahrestagung 2005 CY - Wiesbaden, Germany DA - 2005-09-06 PY - 2005 AN - OPUS4-11461 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Schulze, A. A1 - Krause, Ulrich T1 - The main gaseous products and the mass loss during the self-ignition of combustible materials T2 - 6th International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions CY - Halifax, Canada DA - 2006-08-27 KW - Self-ignition KW - Combustion KW - Biomass KW - FTIR-gas-measurements KW - Macro-thermal balance PY - 2006 SN - 0950-4230 SN - 1873-3352 SP - 825 EP - 836 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-12892 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Neuenfeld, S. T1 - On the explosive properties of 1H-benzotriazole and 1H-1,2,3-triazole N2 - For 1H-benzotriazole, no explosive properties are observable, but the relative high exothermic decomposition energy of 1590 J/g should be kept in mind. Nevertheless, an endothermic melting barrier at 100 °C ensures safe handling at lower temperatures. For 1H-1,2,3-triazole, the exothermic decomposition energy is as high as 2600 J/g, but explosive properties are also not detectable. Therefore, both reagents are hazardous with regard to the exothermic decomposition potential and can be handled safely with precautions. KW - 1H-Benzotriazole KW - 1H-1,2,3-Triazole KW - Explosive properties KW - DSC PY - 2007 SN - 0040-4039 SN - 1873-3581 VL - 48 IS - 7 SP - 1233 EP - 1235 PB - Elsevier CY - Amsterdam AN - OPUS4-14476 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Krause, Ulrich A1 - Neumann, F. T1 - Untersuchung des Verhaltens von Steinkohlen unter dem Gesichtspunkt des Ex-Schutzes N2 - Die Kenntnis des Brenn- und Explosionsverhaltens von Stäuben ermöglicht die Festlegung geeig-neter Explosionsschutzmaßnahmen. Am Beispiel von Steinkohle- Mahlanlagen werden Untersu-chungen zur Bestimmung sicherheitstechnischer Kenngrößen (STK) von Stäuben vorgestellt. Hier-bei erfolgt zunächst die auf den Anwendungsfall abgestimmte Auswahl geeigneter Untersuchungs-verfahren und deren Anpassung an vorliegende Randbedingungen. Aufbauend auf die gewonnenen Erkenntnisse werden Schlussfolgerungen für den sicheren Betrieb von Steinkohle- Mahlanlagen getroffen. T2 - VGB-Konferenz "Kraftwerke im Wettbewerb 2007, Neue Kraftwerke - mit Erfahrung und Innovation die Zukunft gestalten" CY - Hamburg, Deutschland DA - 2007-04-25 KW - Explosionsschutz KW - Steinkohle KW - Mahlanlagen KW - Selbstentzündung PY - 2007 IS - CD-ROM SP - 15 Seiten PB - VGB PowerTech e.V. CY - Hamburg AN - OPUS4-14785 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -