TY - JOUR A1 - Rethmeier, Michael A1 - Gook, Sergej A1 - Lammers, Marco A1 - Gumenyuk, Andrey T1 - Laser-Hybrid Welding of Thick Plates up to 32 mm Using a 20 kW Fibre Laser JF - Quarterly journal of the Japan Welding Society N2 - New brilliant high-power lasers such as disc laser and fibre laser open up new fields of applications for laser-hybrid welding, e.g. power generation, shipbuilding and pipeline construction. For the use of laser-hybrid welding in pipe laying, insensibility towards tolerances and the possibility of orbital welding are very important factors in addition to the weld seam quality. Within the scope of a basic research project, first promising results for laser-hybrid welding of thick materials could be demonstrated. As base material, the typical pipeline steel API 5L X65 was selected. With the help of a 20 kW fibre laser in combination with an arc-welding process it was possible to produce high-quality welds in plates of up to 20 mm thickness in a single pass and of up to 32 mm in three to five passes, both welded in position PA. Various joint preparations were examined to weld 20 mm thick plates in one pass. Besides different welding positions, gap bridgeability and misalignment were studied. Results for microhardness and Charpy toughness are presented to proof the applicability of laser-hybrid welding for joining in pipe laying. KW - Laser beam welding KW - High power fibre laser KW - Laser-hybrid welding KW - Tick plates KW - Pipe laying PY - 2009 DO - https://doi.org/10.2207/qjjws.27.74s SN - 0288-4771 VL - 27 IS - 2 SP - 74 EP - 79 CY - Tokyo, Japan AN - OPUS4-20345 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -