TY - THES A1 - Bachmann, Marcel T1 - Numerische Modellierung einer elektromagnetischen Schmelzbadkontrolle beim Laserstrahlschweißen von nicht-ferromagnetischen Werkstoffen N2 - Die Verfügbarkeit von Laserstrahlquellen mit immer höheren Leistungsparametern ermöglicht ein effektives und schnelles Schweißen von stetig größer werdenden Blechdicken. Dabei treten Herausforderungen bezüglich der Prozessstabilität, z.B. ein Austropfen von Schmelze bei Durchschweißungen sowie die Beherrschung der Dynamik, insbesondere an den freien Oberflächen, die stark von Oberflächenspannungseffekten beeinflusst wird, in den Vordergrund. Die vorliegende Arbeit liefert einen primär numerischen Beitrag zur Anwendung oszillierender sowie zeitlich invarianter magnetischer Felder beim Hochleistungs-Laserstrahlschweißen von nicht-magnetischen Bauteilen hoher Blechdicke. Für die simulativen Untersuchungen wurden die Materialien Aluminium sowie austenitischer Stahl AISI 304 herangezogen und mit Querschliffen von exemplarisch durchgeführten Schweißungen an der Legierung AlMg3 bzw. AISI 304 verglichen. Die Simulationen wurden mit dem kommerziellen Finite- Elemente-Paket COMSOL Multiphysics durchgeführt. In diesem Rahmen wurden Strömungs- und Temperaturfelder sowie die Verteilungen der elektromagnetischen Feldgrößen berechnet. Die Bewertung der elektromagnetischen Beeinflussung des Schmelzbades erfolgte für die Anwendung oszillierender Magnetfelder zur Vermeidung des Schmelzaustropfens anhand der Druckverteilungen an unterer und oberer Schmelzbadoberflächen. Der Grad der Strömungsdämpfung durch elektromagnetische Kräfte wurde durch dimensionslose Kennzahlen unter Berücksichtigung des turbulenten Strömungszustandes bewertet. Es konnte im Rahmen der Arbeit gezeigt werden, dass durch den im Schmelzbad wirkenden vertikalen Anteil der Lorentzkraft, basierend auf einem oszillierenden magnetischen Feld unterhalb der Schweißzone und den im Werkstück induzierten elektrischen Wirbelströmen, ein Austropfen von verflüssigtem Material verhindert und somit ein sicherer Schweißprozess ermöglicht werden kann. Die hierfür benötigten elektromagnetischen Leistungen liegen für 20 mm dickes Aluminium und seinen Legierungen im Bereich mehrerer hundert Watt. Numerische Untersuchungen zur Strömungsdämpfung mittels permanentmagnetischer Felder zeigen die Möglichkeit auf, die Strömungsgeschwindigkeit und die lokale Turbulenzverteilung effektiv zu reduzieren. Dabei spielt die Polarität des quer zur Strömungsrichtung angelegten magnetischen Feldes keine Rolle für die resultierenden Kräfte. Die rechnerisch ermittelte Veränderung der Nahtform hin zu einem V-förmigen Profil konnte experimentell bestätigt werden. Die dazu notwendigen magnetischen Flussdichten für den Laborversuch liegen im Bereich kommerziell erhältlicher Neodym- Eisen-Bor Magnete bei etwa 500 mT. N2 - The availability of high power laser beam sources enables an effective and fast welding process of ever thicker metal parts. At the same time, challenges concerning the process stability appear, e.g. a drop-out of molten material in full-penetration welding as well as the control of the dynamics, especially in the vicinity of the free surfaces of the weld bead where surface tension effects dominate. The present work provides a primary numerical contribution to the application of oscillating as well as time-invariant magnetic fields to the high power laser beam welding of non-ferromagnetic metal parts of high thickness. For the simulations, the materials under investigation were aluminum and austenitic stainless steel AISI 304. The numerical results were compared to macrographs of exemplary test welds of the alloys AlMg3 and AISI 304. The simulations were conducted with the commercial finite element package COMSOL Multiphysics. In the framework of the investigations, calculations were done for the fluid flow and temperature as well as for the electromagnetic field quantities. The evaluation of the electromagnetic weld pool control for the application of oscillating magnetic fields to avoid liquid metal drop-out was carried out on the basis of pressure distribution analysis between the lower and upper weld pool surfaces. The degree of magnetic damping by Lorentz forces was calculated by dimensionless numbers also accounting for the turbulent state of the fluid flow. In this work, it could be shown, that the vertical part of the Lorentz forces, that are based on an oscillating magnetic field below the process zone and its induced eddy currents in the workpiece, prevents the liquid metal from drop-out. Thereby, a reliable welding process was made possible. The electromagnetic power used for the welding of a 20 mm thick aluminum alloy with electromagnetic support lies in the range of several hundreds Watt. Numerical investigations concerning the flow damping by permanent magnetic fields show the possibility to reduce the local flow velocity as well as the turbulence distribution effectively. The polarity of the applied magnetic field, which is aligned in horizontal direction and vertical to the welding direction, is indecisive for the direction of the developing Lorentz forces. The numerically predicted transition of the cross-sectional weld bead geometry to a V-shaped profile could also be proved experimentally. The required magnetic flux density for that was in the range of commercially available neodymium iron boron magnets of around 500 mT. T3 - BAM Dissertationsreihe - 113 KW - Schmelzbadstütze KW - Laserstrahlschweißen KW - Marangoni-Effekt KW - Hartmann-Effekt KW - numerische Simulation PY - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-459 SN - 978-3-9815944-9-2 SN - 1613-4249 VL - 113 SP - 1 EP - 189 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-45 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bachmann, Marcel A1 - Avilov, Vjaceslav A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - High Power Laser Beam Welding of Austenitic Stainless Steel with Electromagnetic Weld Pool Support T2 - 6th International Conference Laser Technologies in Welding and Materials Processing CY - Katsiveli, Ukraine DA - 2013-05-27 PY - 2013 AN - OPUS4-28619 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bachmann, Marcel A1 - Avilov, Vjaceslav A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Multiphysics Process Simulation of the Electromagnetic-Supported Laser Beam Welding T2 - COMSOL Conference CY - Stuttgart, Germany DA - 2011-10-26 PY - 2011 AN - OPUS4-24731 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bachmann, Marcel A1 - Avilov, Vjaceslav A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Multiphysics Process Simulation of the Electromagnetic-Supported High Power Laser Beam Welding of Austenitic Stainless Steel T2 - COMSOL Conference 2013 Rotterdam CY - Rotterdam, Netherlands DA - 2013-10-23 PY - 2013 AN - OPUS4-29315 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bachmann, Marcel A1 - Avilov, Vjaceslav A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Simulation of an Inductive Weld Pool Support for Deep Penetration Laser Beam Welding of Metal Parts T2 - Conference Electromagnetic Processing of Materials Beijing 2012 CY - Beijing, China DA - 2012-10-22 PY - 2012 AN - OPUS4-26853 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bachmann, Marcel A1 - Gumenyuk, Andrey A1 - Avilov, Vjaceslav A1 - Rethmeier, Michael T1 - Fluid Flow Simulation of the Influence of a Steady Magnetic Field on the Weld Pool Dynamics in Deep Penetration Laser Beam Welding of Aluminium T2 - Conference Electromagnetic Processing of Materials Beijing 2012 CY - Beijing, China DA - 2012-10-22 PY - 2012 AN - OPUS4-26854 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bachmann, Marcel A1 - Avilov, Vjaceslav A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Multi-physical finite element simulation of an electromagnetic weld pool support in full-penetration high power laser beam welding of metal plates T2 - 10th International Seminar Numerical Analysis of Weldability CY - Seggauberg, Austria DA - 2012-09-24 PY - 2012 AN - OPUS4-26779 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bachmann, Marcel A1 - Avilov, Vjaceslav A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Multi-Physics Process Simulation of Static Magnetic Fields in High Power Laser Beam Welding of Aluminium T2 - COSMOL Conference Milan 2012 CY - Milan, Italy DA - 2012-10-10 PY - 2012 AN - OPUS4-26780 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bachmann, Marcel A1 - Avilov, Vjaceslav A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Numerical Simulation of Electromagnetic Melt Control Systems in High Power Laser Beam Welding T2 - 32nd International Congress on Applications of Laser & Electro-Optics (ICALEO) CY - Miami, FL, USA DA - 2013-10-06 PY - 2013 AN - OPUS4-29425 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bachmann, Marcel A1 - Avilov, Vjaceslav A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - CFD Simulation of the Liquid Metal Flow in High Power Laser Welding of Aluminum with Electromagnetic Weld Pool Support T2 - Proceedings 2nd International Conference on Fluid Mechanics and Heat & Mass Transfer 2011 CY - Corfu, Greece DA - 2011-07-14 PY - 2011 AN - OPUS4-24125 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -