TY - CONF A1 - Hentschel, Manfred P. A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Manke, I. A1 - Kardjilov, N. A1 - Grothausmann, R. A1 - Hilger, A. A1 - Banhart, J. A1 - Schäfer, R. A1 - Strobl, M. A1 - Dawson, M. A1 - Grünzweig, C. A1 - David, C. A1 - Behr, G. T1 - Three-dimensional imaging of magnetic domains T2 - 2nd HZB Joint User's Meeting CY - Berlin, Germany DA - 2010-12-09 PY - 2010 AN - OPUS4-22885 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Manke, I. A1 - Kardjilov, N. A1 - Schäfer, R. A1 - Hilger, A. A1 - Strobl, M. A1 - Dawson, M. A1 - Grünzweig, C. A1 - Behr, G. A1 - Hentschel, Manfred P. A1 - David, C. A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Banhart, J. T1 - Three-dimensional imaging of magnetic domains N2 - Magnetic domains have been the subject of much scientific investigation since their theoretical existence was first postulated by P.-E. Weiss over a century ago. Up to now, the three-dimensional (3D) domain structure of bulk magnets has never been observed owing to the lack of appropriate experimental methods. Domain analysis in bulk matter thus remains one of the most challenging tasks in research on magnetic materials. All current domain observation methods are limited to studying surface domains or thin magnetic films. As the properties of magnetic materials are strongly affected by their domain structure, the development of a technique capable of investigating the shape, size and distribution of individual domains in three dimensions is of great importance. Here, we show that the novel technique of Talbot-Lau neutron tomography with inverted geometry enables direct imaging of the 3D network of magnetic domains within the bulk of FeSi crystals. KW - Computed tomography KW - Reconstruction algorithm KW - Talbot-Lau neutron tomography KW - Magnetic domains PY - 2010 DO - https://doi.org/10.1038/ncomms1125 SN - 2041-1723 SP - 1 EP - 6 PB - Nature Publishing Group CY - London, UK AN - OPUS4-22609 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Manke, I. A1 - Kardjilov, N. A1 - Schäfer, R. A1 - Hilger, A. A1 - Grothausmann, R. A1 - Strobl, M. A1 - Dawson, M. A1 - Grünzweig, C. A1 - Tötzke, C. A1 - David, C. A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Banhart, J. T1 - Three-dimensional imaging of magnetic domains with neutron grating interferometry N2 - This paper gives a brief overview on3D imaging of magnetic domains with shearing grating neutron tomography. We investigated the three-dimensional distribution of magnetic domain walls in the bulk of a wedge-shaped FeSi single crystal. The width of the magnetic domains wasanalyzed at different locations within the crystal. Magnetic domains close to the tip of the wedge are much smaller than in the bulk. Furthermore, the three-dimensional shape of individual domains wasinvestigated. We discuss prospects and limitations of the applied measurement technique. KW - Neutron imaging KW - Tomography KW - Magnetic domains KW - Grating interferometry KW - Darkfield imaging KW - Shearing gratings KW - Talbot-Lau KW - Three-dimensional data quantification KW - Tomographic reconstruction PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-341919 DO - https://doi.org/10.1016/j.phpro.2015.07.057 SN - 1875-3892 VL - 69 SP - 404 EP - 412 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-34191 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - de Andrade Silva, F. A1 - Williams, J. J. A1 - Müller, Bernd R. A1 - Hentschel, Manfred P. A1 - Portella, Pedro Dolabella A1 - Chawla, N. T1 - Three-dimensional microstructure visualization of porosity and Fe-rich inclusions in SiC particle-reinforced Al alloy matrix composites by X-ray synchrotron tomography N2 - Microstructural aspects of composites such as reinforcement particle size, shape, and distribution play important roles in deformation behavior. In addition, Fe-rich inclusions and porosity also influence the behavior of these composites, particularly under fatigue loading. Three-dimensional (3-D) visualization of porosity and Fe-rich inclusions in three dimensions is critical to a thorough understanding of fatigue resistance of metal matrix composites (MMCs), because cracks often initiate at these defects. In this article, we have used X-ray synchrotron tomography to visualize and quantify the morphology and size distribution of pores and Fe-rich inclusions in a SiC particle-reinforced 2080 Al alloy composite. The 3-D data sets were also used to predict and understand the influence of defects on the deformation behavior by 3-D finite element modeling. KW - Synchrotron radiation KW - X-ray tomography KW - X-ray refraction KW - Analyser based imaging KW - Metal matrix composite (MMC) KW - Fatigue PY - 2010 DO - https://doi.org/10.1007/s11661-010-0260-0 SN - 1073-5623 SN - 1543-1940 VL - 41 IS - 8 SP - 2121 EP - 2128 PB - The Minerals, Metals and Materials Society CY - Warrendale AN - OPUS4-21629 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tötzke, C. A1 - Gaiselmann, G. A1 - Osenberg, M. A1 - Bohner, J. A1 - Arlt, Tobias A1 - Markötter, H. A1 - Hilger, A. A1 - Wieder, F. A1 - Kupsch, Andreas A1 - Müller, Bernd R. A1 - Hentschel, Manfred P. A1 - Banhart, J. A1 - Schmidt, V. A1 - Lehnert, W. A1 - Manke, I. T1 - Three-dimensional study of compressed gas diffusion layers using synchrotron X-ray imaging N2 - We present a synchrotron X-ray tomographic study on the morphology of carbon fiber-based gas diffusion layer (GDL) material under compression. A dedicated compression device is used to provide well-defined compression conditions. A flat compression punch is employed to study the fiber geometry at different degrees of compression. Transport relevant geometrical parameters such as porosity, pore size and tortuosity distributions are calculated. The geometric properties notably change upon compression which has direct impact on transport conditions for gas and fluid flow. The availability of broad 3D paths, which are most important for the transport of liquid water from the catalyst layer through the GDL, is markedly reduced after compression. In a second experiment, we study the influence of the channel-land-pattern of the flow-field on shape and microstructure of the GDL. A flow-field compression punch is employed to reproduce the inhomogeneous compression conditions found during fuel cell assembly. While homogenously compressed underneath the land the GDL is much less and inhomogeneously compressed under the channel. The GDL material extends far into the channel volume where it can considerably influence gas and fluid flow. Loose fiber endings penetrate deeply into the channel and form obstacles for the discharge of liquid water droplets. KW - Synchrotron X-ray tomography KW - Gas diffusion layer (GDL) KW - Microstructure KW - Water transport path KW - Pore size analysis KW - Geometrical tortuosity PY - 2014 DO - https://doi.org/10.1016/j.jpowsour.2013.12.062 SN - 0378-7753 VL - 253 SP - 123 EP - 131 PB - Elsevier CY - Amsterdam [u.a.] AN - OPUS4-29979 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Arlt, Tobias A1 - Grothausmann, R. A1 - Manke, I. A1 - Markötter, H. A1 - Hilger, A. A1 - Kardjilov, N. A1 - Tötzke, C. A1 - Banhart, J. A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Krüger, P. A1 - Haußmann, J. A1 - Hartnig, C. A1 - Wippermann, K. T1 - Tomografische Methoden für die Brennstoffzellenforschung N2 - Aufgrund des hohen Wirkungsgrades und der vielfältigen Einsatzmöglichkeiten können Brennstoffzellen einen wichtigen Beitrag zur zukünftigen Energieversorgung leisten. Für die Optimierung der Brennstoffzellentechnik ist es erforderlich, die während des Zellbetriebs ablaufenden Prozesse zu verstehen und exakt zu charakterisieren. Ein ausbalanciertes Wassermanagement ist die Grundlage für die optimale Leistungsfähigkeit einer wasserstoffbetriebenen Zelle. Das während des Betriebs entstehende Wasser muss die Membran ausreichend befeuchten, um deren Protonenleitfähigkeit aufrechtzuerhalten. Andererseits behindern zu große Wasseransammlungen in der Zelle die Gaszufuhr durch die porösen Materialien sowie in den Kanälen der Gasverteilerstrukturen. Alterungsphänomene einzelner Zellkomponenten können die Verteilung der Wasseransammlungen und somit das Wassermanagement empfindlich stören und so die Leistungsfähigkeit der Brennstoffzelle herabsetzen. Zur Analyse der Wasserverteilung werden zerstörungsfreie, bildgebende Methoden, wie die Ex-situ-Neutronentomografie und die In-situ-Synchrotronradiografie, eingesetzt. Diese Methoden können während des Brennstoffzellenbetriebs mit weiteren Messverfahren, beispielsweise der ortsaufgelösten Stromdichtemessung, kombiniert werden. Auf diese Weise werden einzelne Komponenten, wie zum Beispiel die Gasdiffusionsschichten, charakterisiert. KW - Computertomographie KW - Elektronentomographie KW - Neutronentomographie KW - Brennstoffzelle KW - Stromdichtemessung KW - Wassermanagement PY - 2013 DO - https://doi.org/10.3139/120.110429 SN - 0025-5300 VL - 55 IS - 3 SP - 207 EP - 213 PB - Hanser CY - München AN - OPUS4-27950 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Arlt, Tobias A1 - Grothausmann, R. A1 - Manke, I. A1 - Markötter, H. A1 - Krüger, P. A1 - Haussmann, J. A1 - Hilger, A. A1 - Kardjilov, N. A1 - Hartnig, C. A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Wippermann, K. A1 - Banhart, J. T1 - Tomografische Methoden für die Brennstoffzellenforschung N2 - Auf Grund des hohen Wirkungsgrades und der vielfältigen Einsatzmöglichkeiten stellen Brennstoffzellen sowie Brennstoffzellenverbünde eine vielversprechende Energiequelle dar. Daher ist es wichtig, die Prozesse während des Betriebs einer Brennstoffzelle exakt charakterisieren zu können, um diese im nächsten Schritt zu optimieren. So ist ein ausbalanciertes Wassermanagement in einer mit Wasserstoff betriebenen Zelle ausschlaggebend für ihre Leistungsfähigkeit. Für eine dauerhafte Leistungsfähigkeit muss das entstehende Wasser die Membran feucht halten, um so die Protonenleitfähigkeit aufrecht zu erhalten. Zu viel Wasser kann jedoch die Gaszufuhr durch die porösen Materialien in Richtung Membran verhindern. Alterungsphänomene der einzelnen Komponenten können dieses sensible Wassermanagement stören und so die Leistungsfähigkeit einer Brennstoffzelle herabsetzen. Zum tieferen Verständnis der Wasserverteilung werden zerstörungsfreie Methoden, wie zum Beispiel die ex situ Neutronentomografie oder die in situ Synchrotronradiografie eingesetzt. Letztere Methode kann während des Brennstoffzellenbetriebs in Kombination mit weiteren Messmethoden, wie der ortsaufgelösten Stromdichtemessung, eingesetzt werden. So können einzelne Brennstoffzellenkomponenten, wie die Gasdiffusionsschichten, charakterisiert werden. T2 - DGZfP-Jahrestagung 2011 CY - Bremen, Germany DA - 30.05.2011 KW - Computer-Tomographie KW - Rekonstruktionsalgorithmen KW - Röntgen-Kanten-Tomographie KW - Neutronen-Tomographie KW - Elektronen-Tomographie PY - 2011 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-250023 SN - 978-3-940283-33-7 IS - DGZfP-BB 127 (P7) SP - 1 EP - 8 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) AN - OPUS4-25002 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Kupsch, Andreas T1 - True 3D-CT-reconstruction in comparison to the FDK-algorithm T2 - 17th World Conference on Non-Destructive Testing CY - Shanghai, China DA - 2008-10-25 KW - Computed tomography KW - Spatial resolution KW - Reconstruction algorithm PY - 2008 SP - 1 EP - 5 PB - International Committee for Non-Destructive Testing CY - Shanghai AN - OPUS4-18568 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. T1 - Verbesserte Computertomographie durch iterative Brennfleckentschmierung T2 - DGZfP-Jahrestagung 2009 CY - Münster, Deutschland DA - 2009-05-18 KW - Computer-Tomographie KW - Rekonstruktionsalgorithmen KW - Ortsauflösung KW - Verschmierung KW - Brennfleck PY - 2009 SN - 978-3-940283-16-0 IS - DGZfP-BB 115 SP - 1 EP - 8 AN - OPUS4-20542 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Grothausmann, R. A1 - Manke, I. T1 - Verbesserte Elektronen-Tomographie mittels DIRECTT-Algorithmus N2 - Tomographische Messungen in Transmissions-Elektronenmikroskopen beziehen ihren Reiz aus der hohen Ortsauflösung im Nanometerbereich. Allerdings bringen sie neben dem hohen Aufwand bei der Probenpräparation auch eine außerordentliche Häufung von Restriktionen der Messung mit sich, die bei Verwendung herkömmlicher Rekonstruktionsalgorithmen zu erheblichen Artefakten führen. Diese Restriktionen betreffen: partielle Nichtdurchstrahlbarkeit, einen eingeschränkten Winkelbereich, wenige Projektionen in Bezug auf die Detektorgröße, Probenabbildungen größer als der Detektor, instabile Rotationsachse, variierende Winkelinkremente sowie Probenveränderungen während der Messung. Der DIRECTT-Algorithmus (Direkte iterative Rekonstruktion computertomographischer Trajektorien) kann, abgesehen von der Probenveränderung, sämtliche dieser Restriktionen geeignet berücksichtigen. Die auftretenden, teils unvollständigen Bahnen lassen sich mittels einer Treffertabelle und geeigneter Auswahl iterativ behandeln. Außerdem kann das Rekonstruktionsvolumen über die Detektorlänge hinaus erweitert werden. Damit gelingt eine weitgehende Unterdrückung von Rekonstruktionsartefakten, insbesondere der sonst dominanten Streifenartefakte, und eine deutliche Erhöhung der Ortsauflösung. Die Verbesserung der Rekonstruktionsqualität wird anhand von Modell- und experimentellen Daten gezeigt. T2 - DGZfP-Jahrestagung 2011 CY - Bremen, Germany DA - 30.05.2011 KW - Elektronen-Tomographie KW - Computer-Tomographie KW - Rekonstruktionsalgorithmen PY - 2011 SN - 978-3-940283-33-7 IS - DGZfP-BB 127 (P8) SP - 1 EP - 7 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) AN - OPUS4-25004 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Jaenisch, Gerd-Rüdiger A1 - Kardjilov, N. A1 - Tötzke, C. A1 - Markötter, H. A1 - Hilger, A. A1 - Manke, I. T1 - X-ray compton line scan tomography N2 - The potentials of incoherent X-ray scattering (Compton) computed tomography (CT) are investigated. The imaging of materials of very different atomic number or density at once is generally a perpetual challenge for X-ray tomography or radiography. In a basic laboratory set-up for simultaneous perpendicular Compton scattering and direct beam attenuation tomography are conducted by single channel photon counting line scans. This results in asymmetric distortions of the projection profiles of the scattering CT data set. In a first approach, corrections of Compton scattering data by taking advantage of rotational symmetry yield tomograms without major geometric artefacts. A cylindrical sample composed of PE, PA, PVC, glass and wood demonstrates similar Compton contrast for all the substances, while the conventional absorption tomogram only reveals the two high order materials. Comparison to neutron tomography reveals astonishing similarities except for the glass component (without hydrogen). Therefore, Compton CT offers the potential to replace neutron tomography, which requires much more efforts. KW - X-ray compton scattering KW - Computed tomography KW - Neutron tomography PY - 2015 DO - https://doi.org/10.3139/120.110799 SN - 0025-5300 VL - 57 IS - 11-12 SP - 985 EP - 991 PB - Hanser CY - München AN - OPUS4-34963 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lange, Axel A1 - Hentschel, Manfred P. A1 - Kupsch, Andreas A1 - Jaenisch, Gerd-Rüdiger A1 - Kardjilov, N. A1 - Tötzke, C. A1 - Markötter, H. A1 - Hilger, A. A1 - Manke, I. T1 - X-ray compton tomography N2 - The potentials of incoherent X-ray Scattering (Compton) tomography are investigated. Imaging materials of very different density or atomic number at once is a perpetual challenge for X-ray tomography or radiography, in general. In a basic laboratory set-up for simultaneous perpendicular Compton Scattering and direct beam attenuation tomographic scans are conducted by single channel photon counting. This results in asymmetric distortions of the projection profiles of the scattering CT-data set. ln a first approach corrections of Compton scattering data by taking advantage of rotational symmetry yield tomograms without major geometric artefacts. A cylindrical sample composed of PE, PA, PVC, glass and wood demonstrates similar Compton contrast for all the substances, while the conventional absorption tomogram only reveals the two high order materials. Compärison to neutron tomography reveals astonishing similarities except for the glass component (without hydrogen). Therefore, Compton CT bears the potential to replace neutron tomography, which requires much more efforts. T2 - ECNDT 2014 - 11th European Conference on Non-Destructive Testing CY - Prague, Czech Republic DA - 06.10.2014 KW - X-ray compton scattering KW - Computed tomography KW - Neutron tomography PY - 2014 SN - 978-80-214-5018-9 SP - 1 EP - 9 PB - Brno University of Technology CY - Brno AN - OPUS4-31972 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kupsch, Andreas A1 - Hentschel, Manfred P. A1 - Lange, Axel A1 - Müller, Bernd R. T1 - X-ray dark field imaging N2 - A new kind of enhanced contrast X-ray imaging of weakly absorbing materials in dark field mode is presented. Samples such as plastics and biological tissue are a perpetual challenge for radiographic imaging. Recent innovative approaches such as Diffraction Enhanced Imaging (DEI), “phase contrast”, grating interferometry (Talbot-Lau), or Refraction Enhanced Imaging (REI) have in common that they yield enhanced contrast based on deflected X-rays. Here, we introduce a REI modification, which works with a slightly bent single crystal reflecting in Bragg geometry. The samples are placed upstream of the thin crystal within a parallel synchrotron beam. The crystal’s curvature creates a dark-field stripe in the transmission image, similar to the inverse of a Darwin-Prins rocking curve of plane crystals. The reflection condition is met better or worse as a steady function of incidence position. Refracted beam portions of sample interfaces appear bright on black stripes. The entire image is finally synthesized by multiple dark-field stripes. The technique is an alternative to the mentioned techniques. We demonstrate the technique’s advantage by examples of biological and technical microstructures. T2 - ECNDT 2014 - 11th European conference on non-destructive testing CY - Prague, Czech Republic DA - 06.10.2014 KW - X-ray refraction KW - Refraction enhanced imaging (REI) KW - Phase contrast KW - Radiology KW - Soft matter radiography PY - 2014 SN - 978-80-214-5018-9 SP - 1 EP - 7 AN - OPUS4-31971 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hentschel, Manfred P. A1 - Lange, Axel A1 - Harbich, Karl-Wolfram A1 - Schors, Jörg A1 - Wald, Oliver T1 - X-ray diffraction and refraction topography of light weight materials T2 - 41st Annual Conference of The British Institute of Non-Destructive Testing - NDT 2002 CY - Southport, England DA - 2002-09-17 PY - 2002 AN - OPUS4-3092 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hentschel, Manfred P. A1 - Lange, Axel A1 - Harbich, Karl-Wolfram A1 - Schors, Jörg A1 - Wald, Oliver ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - X-Ray Diffraction and Refraction Topography of Light Weight Materials T2 - 11th International Symposium on Nondestructive Characterization of Materials CY - Berlin, Germany DA - 2002-06-24 PY - 2003 SN - 3-540-40154-7 SP - 157 EP - 166 PB - Springer CY - Berlin AN - OPUS4-2639 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hentschel, Manfred P. A1 - Lange, Axel A1 - Harbich, Karl-Wolfram A1 - Schors, Jörg A1 - Wald, Oliver T1 - X-ray diffraction and refraction topography of light weight materials T2 - Annual conference of the British Institute on Non-Destructive Testing ; NDT 2002 CY - Southport, England, UK DA - 2002-09-17 PY - 2002 SN - 0-903132-30-3 SP - 275 EP - 280 PB - British Institute of Non-Destructive Testing CY - Northampton AN - OPUS4-1938 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hentschel, Manfred P. A1 - Lange, Axel A1 - Harbich, Karl-Wolfram T1 - X-Ray Diffraction Scanning Microscopy - A new method of nondestructive Characterization of inhomogeneous materials T2 - ESA Symposium on Space Applications of Advanced Structural Materials (ESTEC) CY - Noordwijk, Netherlands DA - 1990-03-21 PY - 1990 IS - MBB-Z--0301-90-PUB SP - 447 EP - 450 PB - Zentrale Berichtsstelle, Technisch-wissenschaftliche Information, Messerschmitt-Bölkow-Blohm GmbH CY - München AN - OPUS4-3269 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hentschel, Manfred P. A1 - Lange, Axel A1 - Schors, Jörg A1 - Wald, Oliver ED - Geer, R. T1 - X-Ray Diffraction Topography images materials by molecular probe T2 - Testing, Reliability, and Application of Micro- and Nano-Material Systems II CY - San Diego, CA, USA DA - 2005-03-08 KW - X-ray diffraction KW - X-ray topography KW - X-ray microscopy KW - Texture KW - Polymers KW - Composites KW - Ceramics KW - Compounds KW - Molecular probe KW - Non-metallics PY - 2005 SN - 0-8194-5747-7 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 5766 SP - 9 EP - 14 PB - SPIE CY - Bellingham AN - OPUS4-11700 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hentschel, Manfred P. A1 - Lange, Axel A1 - Schors, Jörg T1 - X-Ray Diffraction Topography images materials by molecular probe T2 - 10th SPIE Intern. Symp. "Nondestructive Evaluation for Health Monitoring and Diagnostics" CY - San Diego, CA, USA DA - 2005-03-08 PY - 2005 AN - OPUS4-11753 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Harbich, Karl-Wolfram A1 - Schors, Jörg A1 - Lange, Axel A1 - Hentschel, Manfred P. ED - van Hemelrijck, D. T1 - X-ray refraction - new methods for non-destructive evaluation of advanced materials T2 - 2nd International Conference on Emerging Technologies in NDT CY - Athens, Greece DA - 1999-05-24 KW - X-ray refraction PY - 2000 SN - 90-5809-127-9 SP - 207 EP - 212 PB - Balkema CY - Rotterdam AN - OPUS4-851 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Harbich, Karl-Wolfram A1 - Hentschel, Manfred P. A1 - Schors, Jörg T1 - X-ray refraction characterization of nonmetallic materials KW - Nondestructive characterization KW - X-ray refraction topography KW - Pore size KW - Crack density PY - 2001 SN - 0963-8695 VL - 34 SP - 297 EP - 302 PB - Butterworth-Heinemann CY - Oxford AN - OPUS4-945 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hentschel, Manfred P. A1 - Harbich, Karl-Wolfram A1 - Lange, Axel A1 - Schors, Jörg A1 - Ekenhorst, Derk A1 - Judd, M.D. A1 - Raynal, R. T1 - X-ray refraction characterizes leight weight materials PY - 1998 SN - 1018-8657 VL - 8 IS - 3 SP - 14 EP - 15 PB - European Space Agency CY - Noordwijk AN - OPUS4-3331 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Harwardt, Michael A1 - Hentschel, Manfred P. T1 - X-Ray refraction computed tomography for NDE of lightweight materials T2 - Deutsche Tagung für Forschung mit Synchrotronstrahlung, Neutronen und Ionenstrahlen an Großgeräten 2006 (SNI2006) CY - Hamburg, Germany DA - 2006-10-04 PY - 2006 AN - OPUS4-15836 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Harbich, Karl-Wolfram A1 - Hentschel, Manfred P. A1 - Ekenhorst, Derk A1 - Schors, Jörg A1 - Lange, Axel T1 - X-Ray Refraction for NDT of Micro Cracks and Impacts N2 - High performance composites and other light weight materials are generally a comple problem to the performance of nondestructive testing methods. X-ray refraction provide unconventional X-ray scattering techniques to meet the actual demand for improve nondestructive characterization of these advanced materials. Scanning the samples across collimated narrow incident X-ray beam permits to image integral micro-structures (a present) with a resolution of 10 µm. Investigations of samples after strain-induced micro cracks and fibre debonding in impact damaged epoxy are shown. The physics of X-ray refraction are analogous to the well known refraction of light b optical lenses and prisms, governed by Snell's law. The special feature is the deflection a very small angles of few minutes of arc, as the refractive index of X-rays in matter i nearly one. Due to the density differences at inner surfaces most of the incident X-rays ar deflected. As the scattered intensity of refraction is proportional to the specific surface of sample, a reference standard gives a quantitative measure for analytical determinations. Figure 1 represents a two-dimensional damage distribution of an impact in a 0/90° CFR laminate of 3 mm, thickness. Unlike in ultrasonic testing, there is no shadowing effect o the successive layers. By use of X-ray refraction the exact concentration of debonde fibres is calculated for each position. Additionally the refraction allows the selection of th fibre orientation. T2 - 7th European Conference on Non-Destructive Testing (ECNDT) CY - Copenhagen, Denmark DA - 1998-05-26 PY - 1998 UR - http://www.ndt.net/abstract/ecndt98/435.htm SN - 87-986898-0-0 VL - 3 CY - Broendy, Denmark AN - OPUS4-3328 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Harbich, Karl-Wolfram A1 - Hentschel, Manfred P. A1 - Ekenhorst, Derk A1 - Schors, Jörg ED - Michel, B. T1 - X-ray refraction for nondestructive investigation of micro cracks and impacts T2 - 2nd International Conference and Exhibition Micro Materials CY - Berlin, Germany DA - 1997-04-16 PY - 1997 SN - 3-932434-05-6 VL - 1 SP - 1025 EP - 1027 PB - ddp Goldenbogen CY - Dresden AN - OPUS4-3662 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hentschel, Manfred P. A1 - Harbich, Karl-Wolfram A1 - Lange, Axel A1 - Rudolph, Hans-Volker T1 - X-ray Refraction of Paper and Pigments PY - 1995 SN - 0025-5300 VL - 37 IS - 3 SP - 60 EP - 62 PB - Carl Hanser Verlag CY - München AN - OPUS4-3656 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hentschel, Manfred P. T1 - X-Ray Refraction Techniques T2 - Bruker AXS B.V. Invited Lecture CY - Delft, Netherlands DA - 2005-08-17 PY - 2005 AN - OPUS4-11747 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Harwardt, Michael A1 - Hentschel, Manfred P. A1 - Illerhaus, Bernhard A1 - Goebbels, Jürgen A1 - Bamberg, J. A1 - Heutling, F. T1 - X-Ray Refraction Topography and Computed Tomography for NDE of Lightweight Materials T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - Synchrotron Refraction CT KW - MMC KW - Bragg-Magnification PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 9(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-13703 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Bernd R. A1 - Hentschel, Manfred P. A1 - Harbich, Karl-Wolfram A1 - Lange, Axel A1 - Schors, Jörg T1 - X-ray refraction topography for non-destructive evaluation of advanced materials T2 - 15th World Conference on Non-Destructive Testing (WCNDT) CY - Roma, Italy DA - 2000-10-15 KW - X-ray refraction PY - 2000 UR - http://www.ndt.net/article/wcndt00/papers/idn257/idn257.htm SN - 1435-4934 VL - 5 IS - 11 SP - 1 EP - 7(?) PB - NDT.net CY - Kirchwald AN - OPUS4-871 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Bernd R. A1 - Hentschel, Manfred P. A1 - Harbich, Karl-Wolfram A1 - Lange, Axel A1 - Schors, Jörg T1 - X-Ray Refraction Topography for Non-Destructive Evaluation of Advanced Materials KW - X-Ray Refraction KW - Fibre Debonding KW - Topography KW - Crack Density KW - Pore Size KW - SAXS PY - 2001 SP - 1 EP - 7 PB - Society of Manufacturing Engineers CY - Dearborn, Mich. AN - OPUS4-1097 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harbich, Karl-Wolfram A1 - Hentschel, Manfred P. A1 - Schors, Jörg ED - Vincenzini, P. T1 - X-ray refraction: A new method for nondestructive characterization of advanced ceramics N2 - Quantitative X-ray refraction topography is applied for improved nondestructive evaluation of advanced high performance ceramics. The method is based on X-ray small angle scattering by refraction of X-rays due to density differences of microstructures in heterogeneous materials. It determines the amount of inner surfaces and interfaces within the range of µm to nm dimensions. As the scattered refraction intensity is proportional to the inner surface density of a sample, a reference standard gives a quantitative measure for analytical requirements. X-ray refraction scanning topography visualizes integral interface properties at 10 µm spatial resolution by two-dimensional computer images. Characteristic microstructure parameters, i.e. density fluctuation, porosity and pore size distribution of several examples of SiO[2]-and SiC ceramics at different stages of sintering are presented. T2 - 9th World Ceramics Congress and Forum on New Materials ; 9th CIMTEC CY - Florence, Italy KW - Advanced ceramics PY - 1999 UR - http://cat.inist.fr/?aModele=afficheN&cpsidt=1811372 SN - 88-86538-17-0 N1 - Serientitel: Advances in science and technology – Series title: Advances in science and technology IS - 16 SP - 345 EP - 352 PB - Techna CY - Faenza AN - OPUS4-3272 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beckmann, Jörg A1 - Lange, Axel A1 - Harwardt, Michael A1 - Hentschel, Manfred P. T1 - Zerstörungsfreie Charakterisierung der oxidativen Schädigung faserverstärkter 2D-C/C-Keramiken mit Hilfe der Röntgen-Refraktions-Topographie N2 - Kohlenstofffaser verstärkte Kohlenstoffe werden während ihres Ge-brauches an Luft zwischen 600°C und 1000°C korrodiert. Um zu überprüfen, ob die Röntgerefraktionsmethode als zerstörungsfreies Prüfverfahren die bei der Oxidation auftretenden morphologischen Änderungen im Probekörper signifikant nachweisen können, wurden bei 630°C oxidativ geschädigte gasphaseninfiltrierte C/C Kerami-ken untersucht. Anhand eines Kugelmodells werden die aus dem Experiment ableit-baren Größen der spezifischen Oberfläche und Porosität erläutert. Die experimen-tellen Ergebnisse konntne nachweisen, dass infiltrierten C/C Keramiken während einer oxidativen Belastung aufgrund des lokal unterschiedlichen Oxidationsverhal-tens eine ausgeprägte Kern Schale Struktur ausbilden. T2 - DGZfP-Jahrestagung 2007 CY - Fürth, Deutschland DA - 2007-05-14 KW - C/C Keramiken KW - Oxidative Schädigung KW - Röntgen-Refraktion PY - 2007 SN - 978-3-931381-98-1 SP - 1 EP - 10 (Poster 30) PB - DGZfP CY - Berlin AN - OPUS4-18347 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hentschel, Manfred P. A1 - Ewers, Benjamin A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Beckmann, Jörg T1 - Zerstörungsfreie Materialcharakterisierung mit Terahertz- und anderen Verfahren T2 - TIBB-Fokusseminar "THz-Technologie und ihre Anwendungen" CY - Templin, Germany DA - 2008-11-13 PY - 2008 AN - OPUS4-18483 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hentschel, Manfred P. A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Schors, Jörg A1 - Wald, Oliver T1 - ZfP von Luftfahrt-Kompositen mittels Röntgen-Refraktion T2 - Seminar "Zerstörungsfreie Prüfung" CY - Stuttgart, Germany DA - 2008-06-13 PY - 2008 AN - OPUS4-18553 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -