TY - CONF A1 - Huismann, Sven A1 - Korzen, Manfred A1 - Rogge, Andreas ED - Rogge, A. ED - Meng, B. T1 - Stahlbetonstützen aus hochfestem Beton unter Brandbeanspruchung und die Anwendung allgemeiner Rechenverfahren T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Germany DA - 07.11.2011 PY - 2011 SN - 978-3-9814281-0-0 SP - 154 EP - 162 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-25186 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pereira, F. A1 - Pistol, Klaus A1 - Korzen, Manfred A1 - Weise, Frank A1 - Pimienta, P. A1 - Carré, H. A1 - Huismann, Sven ED - Koenders, E.A.B. ED - Dehn, F. T1 - Monitoring of fire damage processes in concrete by pore pressure and acoustic emission measurements N2 - This paper presents the combined use of acoustic emission (AE), gas pore pressure and temperature measurements (PT). The simultaneous application of both techniques represents a new methodology in the context of fire spalling and contributes to a better understanding of the mechanisms of fire spalling, particular with regard to the interaction of micro cracking and pore pressure evolution. The study presents fire tests on normal strength concrete specimens with and without reinforcement at ISO Standard fire and at hydrocarbon (HC) fire. Supported by AE-analysis, it can be shown that due to the higher heating rate of the HC-fire in comparison to the ISO Standard fire the damage processes inside the concrete during the exposure are increased combined with augmenting the concrete permeability. As a consequence lower pore pressures were measured. However, despite the lower pore pressures, explosive spalling was observed. T2 - 2nd International RILEM workshop on concrete spalling due to fire exposure CY - Delft, The Netherlands DA - 05.10.2011 KW - Ordinary concrete KW - High temperature KW - Gas pore pressure KW - Acoustic emission KW - Spalling PY - 2011 SN - 978-2-35158-118-6 SP - 69 EP - 77 PB - RILEM Publications AN - OPUS4-24818 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Covi, Patrick A1 - Tondini, Nicola A1 - Korzen, Manfred A1 - Lamperti Tornaghi, Marco T1 - Hybrid fire following earthquake testing of a steel braced frame N2 - The paper presents the results of an experimental-numerical analysis aimed at investigating the performance of passive fire protections applied to steel columns under fires following earthquake (FFE) scenarios. In particular, five FFE tests on columns belonging to a steel braced frame were performed at the Bundesanstalt für Materialforschung und -prüfung (BAM, Federal Institute for Materials Research and Testing) by means of hybrid fire testing technique. In particular, an internal steel column of the ground floor belonging to a three-bay, four-storey concentrically braced steel building was tested, whilst the effect of the remainder of the structure was numerically simulated by means of an equivalent axial stiffness. Since the structure has a low degree of redundancy, the loss of a column can trigger global structural collapse. Two FFE tests were performed without any fire protection system and the other FFE tests were performed with three different fire protection solutions, i.e. conventional and seismic-resistant calcium silicate boards as well as vermiculite spray-based protection. Each column was firstly subjected to horizontal and vertical displacements resulting from seismic nonlinear time-history analysis performed on the numerical model of the case study. Then, the furnace was switched on and the ISO 834 standard fire curve was applied to the specimen. Numerical models were developed and calibrated on experimental data using different types of finite elements. The calibrated models with the presence of axial and rotational springs accurately captured the transition from pre- to post-buckling behavior. These findings highlight the importance of accurate modelling of the boundary conditions. Despite the fact, that seismic intensity was at life safety limit state, it was also found that the seismic damage of the fire protections was not high enough to hinder the fire performance of the fire protections. KW - Fire following earthquake KW - Concentrically braced steel frames KW - Fire protections KW - Numerical simulations KW - Experimental tests KW - Post-earthquake fire PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-645186 DO - https://doi.org/10.1016/j.conbuildmat.2025.143731 SN - 0950-0618 VL - 496 SP - 1 EP - 22 PB - Elsevier CY - Oxford AN - OPUS4-64518 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Meftah, F. A1 - Pesavento, F. A1 - Davie, C. A1 - Dal Pont, S. A1 - Zeiml, M. A1 - Korzen, Manfred A1 - Millard, A. ED - Millard, A. ED - Pimienta, P. T1 - Advanced Modelling N2 - In this chapter, advanced models based on a General thermo-Hydro-Mechanical (THCM) Framework are considered. In These approaches, the concrete is considered as a porous medium, the pores of which are partly filled by gas (a mixture of air and vapour) and water. KW - Concrete KW - High temperature KW - Stress-strain-relation PY - 2019 SN - 978-3-030-11994-2 SN - 978-3-030-11995-9 DO - https://doi.org/10.1007/978-3-030-11995-9 SN - 2213-204X SN - 2213-2031 SP - 27 EP - 65 PB - Springer CY - Cham, Switzerland AN - OPUS4-50174 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Huismann, Sven A1 - Zeiml, M. A1 - Korzen, Manfred A1 - Millard, A. ED - Millard, A. ED - Pimienta, P. T1 - Engineering Modelling N2 - This chapter presents the most commonly used approach to analyse the thermo-mechanical behaviour of concrete structures subjected to high temperatures as in the case of fire loading. Prescriptions of the Eurocode are detailed for the thermal as well as the mechanical analysis. Finally, recommendations from two national (Austrian and German) guidelines give some improvements for Underground infrastructure. KW - Concrete KW - High temperature KW - Stress-strain-relation PY - 2019 SN - 978-3-030-11995-9 DO - https://doi.org/10.1007/978-3-030-11995-9 SN - 2213-204X SN - 2213-2031 SP - 15 EP - 25 PB - Springer CY - Cham, Switzerland AN - OPUS4-51186 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Daus, Lars-Hendrik A1 - Korzen, Manfred A1 - Schartel, Bernhard T1 - High-throughput fire tests and weathering-induced degradation behaviour of intumescent coatings N2 - In this work, the weathering-induced degradation of intumescent coatings was investigated by a systematic and comprehensive approach. A mechanism is revealed that is proposed to be responsible for the loss of function of intumescent coatings induced by weathering. First, the thermal decomposition of artificially weathered intumescent coatings was examined. To get a better understanding of the weathering and ageing phenomena, the degradation behaviour of the single ingredients during the weathering process was investigated, as well as their chemical and physical interactions. For the systematic approach, the materials that are essential for intumescence (ammonium polyphosphate, pentaerythritol, titanium dioxide, melamine and the binder) are treated with moisture, elevated temperature and UV radiation. Thermogravimetry (TG) and IR spectroscopy were used to compare the initial samples with their different grades of weathering. We demonstrate that ammonium polyphosphate, melamine and the binder are mainly responsible for the ageing process. Further, it was demonstrated that TG and IR spectroscopy are suitable measuring methods to detect the effects of weathering on intumescent coatings. Finally, a small-scale fire test procedure is introduced. Based on the reduction of the sample size, up to 50 samples can be tested in a single fire test. The results of this fire test have the same quality as the results from standard intermediate fire tests corresponding to DIN 4102-8. T2 - 3rd European Symposium on Fire Safety Science CY - Nancy, France DA - 12.09.1018 KW - Weathering KW - Intumescent coatings KW - High-Throughput Fire Tests PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-472023 UR - http://iopscience.iop.org/article/10.1088/1742-6596/1107/3/032014/pdf DO - https://doi.org/10.1088/1742-6596/1107/3/032014 VL - 1107 SP - 032014 PB - IOP Publishing CY - Bristol AN - OPUS4-47202 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Correia, A.M. A1 - Rodrigues, J.P.C. A1 - Korzen, Manfred T1 - Experimental research on the load-bearing capacity of partially encased steel columns under fire conditons N2 - The composite steel and concrete columns are known to have enhanced fire behaviour when compared with bare steel columns. However there are still aspects that must be clarified, as the influence of the building surrounding structure on the fire resistance of the columns. In this paper, the results of fire resistance tests on partially encased steel columns carried out with two different experimental systems are compared. In one of the experimental systems, the building surrounding structure is materialised by a steel restraining frame, and in the other is performed by the so-called substructuring method. Due to the concept of hybrid substructuring, the entire building is decomposed in two parts: one is represented by the building element under test, whereas the remaining building is simulated numerically in a computer. The main conclusion drawn from this work was that the surrounding structure has a major influence in the development of axial forces in the test columns. Moreover, it was observed that the higher the non-dimensional axial restraint ratio the lower the critical time of the columns. KW - Fire resistance KW - Thermal restraint KW - Composite steel-concrete columns KW - Substructuring method KW - Restraining frame PY - 2012 DO - https://doi.org/10.1260/2040-2317.3.1.81 SN - 2040-2317 VL - 3 IS - 1 SP - 81 EP - 94 PB - Multi-Science Publ. Co. CY - Brentwood AN - OPUS4-25632 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hauswaldt, Sebastian A1 - Korzen, Manfred A1 - Hartmann, S. ED - Fontana, M. ED - Frangi, A. ED - Knobloch, M. T1 - A continuum-mechanical model for FE-simulations of steel constructions in fire N2 - This paper presents a thermoviscoplastic constitutive model within the framework of continuum mechanics for the description of the behavior of structural steel subjected to fire loading. The model is represented through a set of ordinary differential equations and belongs to the class of so-called unified theories which do not separate plastic and creep strains. The material parameters are identified for the structural steel S 235 on the basis of tension and compression tests at constant temperature with varying strain rates and verified against transient creep test with varying temperature. For effective numerical simulations with the finite element program ABAQUS the model is prepared with a stress algorithm and consistent tangent operator. The simulations are compared with experimental data of fire resistance tests on columns. T2 - SIF 2012 - 7th International conference on structures in fire CY - Zurich, Switzerland DA - 06.06.2012 KW - Constitutive equation KW - Viscoplasticity KW - Endochronic plasticity KW - UMAT KW - Finite element method KW - Fire resistance PY - 2012 DO - https://doi.org/10.3929/ethz-a-007050197 SP - 439 EP - 448 CY - Zurich, Switzerland AN - OPUS4-26108 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -