TY - JOUR A1 - Huismann, Sven A1 - Korzen, Manfred A1 - Rogge, Andreas T1 - Entwicklung und Validierung eines allgemeinen Rechenverfahrens für Stahlbetonstützen aus hochfestem Beton unter Brandbeanspruchung JF - Beton- und Stahlbetonbau N2 - Ausgehend von einer kritischen Analyse der Materialkennwerte für normalfesten (NFB) und hochfesten Beton (HFB) im Eurocode 2 wurden in grundlegenden Untersuchungen an der BAM exemplarisch für einen HFB die thermomechanischen Materialkennwerte bestimmt, um auf der Basis eines geeigneten Materialmodells das Verhalten von Stahlbetonstützen aus HFB unter Brandbeanspruchung zu simulieren. Die Validierung des Modells erfolgte mittels großmaßstäblicher Brandversuche an belasteten Stahlbetonstützen aus dem gleichen HFB wie in den Materialuntersuchungen. Es konnte gezeigt werden, dass die Festigkeit als charakteristischer Parameter des Materialmodells zwingend auf der Basis instationärer Versuche – und nicht aus stationären Versuchen wie bei NFB üblich – bestimmt werden muss. Mit den in vorgeschlagenen Materialbeziehungen für HFB wird das Tragverhalten der untersuchten Stützen dagegen deutlich überschätzt, was sich in den numerischen Simulationen insbesondere durch zu geringe Verformungen äußert.------------------------------------------------------------------------------------------------------ Development and Validation of an Advanced Calculation Model for High Strength Concrete Columns Subjected to Fire Loading Following a critical analysis of the material parameters of normal strength (NSC) and high strength concrete (HSC) presented in Eurocode 2 the thermo-mechanical material parameters of one representative HSC were identified. Using these parameters and based on an appropriate material model the behavior of HSC columns was simulated. The validation of the model was realized through real scale fire resistance tests on loaded columns of the same type of HSC as in the material identification tests. It was found that the strength as a characteristic parameter of the material model has to be identified on the basis of transient creep tests and not of stationary tests, respectively as realized usually for NSC. It could be shown that the structural behavior of the tested columns is overestimated if the numerical simulations are based on the material properties of HSC as proposed in. This feature is expressed especially through insufficient displacements. KW - Brandschutz KW - Verformungsverhalten KW - Hochleistungsbeton KW - Nichtlineare Berechnungsverfahren KW - Modellierung KW - EC KW - Eurocode KW - Normen KW - Berechnungs- und Bemessungsverfahren KW - Normen/Vorschriften/Richtlinien KW - Brandschutz KW - Versuche KW - Eurocode KW - Hochfester Beton KW - Feuerwiderstandsdauer KW - Finite-Elemente-Methode PY - 2012 DO - https://doi.org/10.1002/best.201200010 SN - 0005-9900 SN - 1437-1006 VL - 107 IS - 6 SP - 372 EP - 378 PB - Ernst CY - Berlin AN - OPUS4-26100 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -