TY - CONF A1 - Völzke, Holger A1 - Ellouz, Manel A1 - Noack, Volker T1 - Topical aspects of waste container approval for the upcoming KONRAD repository T2 - WM2010 - 36th Annual radioactive waste management symposium CY - Phoenix, Arizona, USA DA - 2010-03-07 KW - Behälter KW - Sicherheit KW - Endlager KW - Bauartprüfung KW - Radioaktive Abfälle PY - 2010 SN - 978-0-9828171-0-0 SP - 1 EP - 12(?) CY - Tempe, AZ, USA AN - OPUS4-21962 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ellouz, Manel T1 - Container Safety Assesment for the Disposal of Non-Heat Generating Radioactive Waste in the KONRAD Repository T2 - 53rd Annual Meeting, INMM CY - Orlando, FL, USA DA - 2012-07-15 PY - 2012 AN - OPUS4-26373 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ellouz, Manel T1 - Konkretisierung der Anforderungen an Abfallbehälter für das Endlager Konrad T2 - 11. Internationales Symposium "Konditionierung radioaktiver Betriebs- und Stilllegungsabfälle" einschließlich 11. Statusbericht des BMBF "Stilllegung und Rückbau kerntechnischer Anlagen" CY - Dresden, Germany DA - 2013-03-13 PY - 2013 AN - OPUS4-28842 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ellouz, Manel A1 - Kasparek, Eva Maria A1 - Völzke, Holger T1 - Konkretisierung der Anforderungen an Abfallbehälter für das Endlager Konrad N2 - Nicht wärmeentwickelnde radioaktive Abfälle, die in der Schachtanlage Konrad endgelagert werden sollen, müssen entsprechend den geltenden Anforderungen für die Endlagerung radioaktiver Abfälle konditioniert und in vom Bundesamt für Strahlenschutz (BfS) zugelassene Behälter verpackt werden. Gemäß einer Verwaltungsvereinbarung erfolgt die zugehörige Bauartprüfung für diese Behälter im Auftrag des BfS durch die BAM. Angesichts des geplanten baldigen Beginns der Betriebsphase des Endlagers Konrad steigt die Anzahl an Zulassungsverfahren, wobei die für alle Behälter gültigen Spezifikationen als auch die nach Behältertyp und -Werkstoff, einzulagerndem Inventar und erforderlichem Sicherheitsniveau differenzierten Anforderungen Gegenstand einer intensiven Diskussion zwischen Behörden, Sachverständigen und Antragstellern sind. Die BAM wurde aufgrund ihrer Erfahrungen in der Behälterqualifikation beauftragt nicht hinreichend konkretisierte behälterspezifische Aspekte in den oben genannten Berichten zu identifizieren und Vorschläge zur Präzisierung unter Berücksichtigung der hierfür relevanten Nebenbestimmungen aus dem Planfeststellungsbeschluss zu erarbeiten. Das Ziel ist Textteile, die unterschiedliche Interpretationen erlauben, zu überarbeiten oder zu kommentieren und somit die Konsistenz, Eindeutigkeit und Verständlichkeit der Konrad-Anforderungen zu verbessern. Ein weiterer wichtiger Aspekt ist die Notwendigkeit der Vervollständigung bestimmter Anforderungen wie zum Beispiel der Prüfanweisung zur Stapelung von Rundgebinden. Ohne das Niveau der Konrad-Anforderungen zu verändern, soll sowohl für die Antragstellerseite eine verbesserte und aktualisierte Grundlage zur Vorbereitung und Erstellung der Nachweisunterlagen, als auch für die prüfenden Institutionen auf dem Weg von der Bauartprüfung über die Konditionierungskampagnen bis hin zur späteren Ablieferung an das Endlager eindeutigere Prüfrandbedingungen vorgegeben werden. Insgesamt können dadurch auf allen Seiten sowohl Aufwand als auch Zeitbedarf für die zahlreichen notwendigen Bauartprüfungen verringert werden. Zu diesem Zweck hat die BAM zunächst einen Themenkatalog mit behälterspezifischen Fragestellungen vorbereitet, der die bisher in der Praxis der durchgeführten oder durchzuführenden Bauartprüfungen festgestellten Diskussionspunkte bündelt. Dieser Themenkatalog wird mit dem BfS laufend erörtert, aktualisiert und mit Prioritäten versehen. Schwerpunkte sind dabei zunächst Prüfanforderungen an Rundgebinde (Stapeldruckprüfung), die Aktualisierung von verwendeten Normen (z.B. ISO 1496-1), der Umgang mit Behälterbeschädigungen (z.B. Abplatzungen bei Betonbehältern), Spezifikationen zu formstabil fixierten Abfällen und Begrifflichkeiten zum Qualitätsmanagement. Dieser Beitrag erläutert die Motivation, Hintergründe und Zielstellungen der laufenden Arbeiten und präsentiert den gegenwärtigen Bearbeitungsstand hinsichtlich der Konkretisierung behälterspezifischer Aspekte in den Endlageranforderungen. Die Themen Stapeldruckprüfung von Rundgebinden und Begrifflichkeiten zum Qualitätsmanagement bilden hierbei die Schwerpunkte. T2 - KONTEC 2013 - 11. Internationales Symposium 'Konditionierung radioaktiverBetriebs- und Stilllegungsabfälle' CY - Dresden, Germany DA - 13.03.2013 PY - 2013 IS - Sektion 4 / Vortrag 031 SP - 727 EP - 744 AN - OPUS4-28914 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ellouz, Manel A1 - Völzke, Holger A1 - Protz, Christian T1 - Container safety assessment for the disposal of non-heat generating radioactive waste in the KONRAD repository T2 - 53rd INMM Annual meeting CY - Orlando, FL, USA DA - 2012-07-15 PY - 2012 SP - 1 EP - 9(?) AN - OPUS4-27217 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ellouz, Manel A1 - Völzke, Holger A1 - Kasparek, Eva Maria T1 - BAM challenges for design testing of waste containers for the final repository Konrad N2 - Up to the end of this decade, corresponding to the planned date of starting operation in the final disposal KONRAD for non-heat generating waste in Germany, a lot of efforts are needed to condition and package the radioactive waste in containers certified by BfS (Federal Institute for Radiation Protection). This waste is produced by public sector and industry as well as nuclear energy facilities, which result in more than a half of the actually declared quantity growing especially after the phase out decision of nuclear power production in Germany and the subsequent decommissioning of nuclear power plants. BAM (Federal Institute for Materials Research and Testing) acts as responsible authority on behalf of BfS for design testing under consideration of the KONRAD requirements. Within the assessment procedure of containers, BAM has to verify the application documents, including material qualification, container geometry, corrosion protection, leakage rate and operational and accidental loading, and to evaluate quality assurance measures. Besides the previous completed approvals for various containers such as steel sheet and cast iron box-shaped containers and concrete cylindrical ones, BAM is actually carrying assessments for other types such as cast iron cylindrical containers and “old” steel sheet box shaped ones. The so called “old” containers present already loaded containers without any KONRAD certification, currently stored at licensed interim storages. In the benefit of the container assessment, BAM operates design testing facilities for drop and fire tests which are also used for research objectives to improve and expand the evaluation methods such as research project ConDrop. The latter deals with numerical simulations and analyses tools for further precise predictions about unfavorable drop test scenarios, safety margins, and design sensitivities for steel sheet containers. Furthermore, during the assessment procedure, several specifications about the containers, the inventory to be disposed and the required safety level have been intensely debated by authorities and applicants. Based on its experience in qualifying containers, BAM has been commissioned to identify insufficiently specified aspects in the waste acceptance criteria and to propose clearer definitions with regard to the secondary regulations in the planning approval notice. This paper focuses on aspects of the contribution of BAM in certifying KONRAD waste containers. This will include the current state of design testing procedures, evaluation methods that are available or are being developed and the main topics within the KONRAD requirements being actually specified by BAM. T2 - ICEM 2013 - 15th International Conference on environmental remediation and radioactive waste management CY - Brussels, Belgium DA - 08.09.2013 PY - 2013 IS - ICEM2013-96258 SP - 1 EP - 9 AN - OPUS4-29468 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger A1 - Nieslony, Gregor A1 - Ellouz, Manel A1 - Noack, Volker A1 - Hagenow, Peter A1 - Kovacs, Oliver A1 - Hörning, Tony T1 - Container approval for the disposal of radioactive waste with negligible heat generation in the German Konrad repository N2 - Since the license for the Konrad repository was finally confirmed by legal decision in 2007, the Federal Institute for Radiation Protection (BfS) has been performing further planning and preparation work to prepare the repository for operation. Waste conditioning and packaging has been continued by different waste producers as the nuclear industry and federal research institutes on the basis of the official disposal requirements. The necessary prerequisites for this are approved containers as well as certified waste conditioning and packaging procedures. The Federal Institute for Materials Research and Testing (BAM) is responsible for container design testing and evaluation of quality assurance measures on behalf of BfS under consideration of the Konrad disposal requirements. Besides assessing the container handling stability (stacking tests, handling loads), design testing procedures are performed that include fire tests (800°C, 1 hour) and drop tests from different heights and drop orientations. This paper presents the current state of BAM design testing experiences about relevant container types (box shaped, cylindrical) made of steel sheets, ductile cast iron or concrete. It explains usual testing and evaluation methods which range from experimental testing to analytical and numerical calculations. Another focus has been laid on already existing containers and packages. The question arises as to how they can be evaluated properly especially with respect to lack of completeness of safety assessment and fabrication documentation. T2 - WM2012 - Waste Management Conference CY - Phoenix, AZ, USA DA - 26.02.2012 PY - 2012 SN - 978-0-9836186-1-4 N1 - Serientitel: WM Symposia – Series title: WM Symposia IS - Paper 12148 SP - 1 EP - 9 PB - WM Symposia CY - Tempe, AZ, USA AN - OPUS4-26272 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Protz, Christian A1 - Völzke, Holger A1 - Ellouz, Manel A1 - Kasparek, Eva Maria A1 - Zencker, Uwe A1 - Grünewald, Heike A1 - Gründer, Klaus-Peter T1 - ConDrop - Development of numerical simulation approaches for drop test analyses of steel sheet containers N2 - According to disposal requirements, containers for radioactive waste have to withstand drop tests at defined conditions corresponding to the considered package category. Alternatively to prototype drop tests, numerical methods can be applied, if they are suitable and sufficiently verified. In this context BAM (Federal Institute for Materials Research and Testing) started the research project ConDrop to develop a reliable Finite Element (FE) model describing the mechanical behavior of a box shaped steel container during a drop test and to determine unfavorable scenarios within future safety assessment procedures of comparable steel sheet containers. In a first step, a FE model of a representative steel sheet container was developed. Flat bottom-side drop tests with the unloaded container from different heights onto an IAEA target were simulated. In order to verify the numerical calculations, two drop tests with an unloaded KONRAD Type V steel sheet container were carried out at the BAM drop test facility. Both drop tests (flat drop from heights 0.4 m and 5 m onto the unyielding IAEA target) had been documented by various extensive measurements: strain and deceleration measurement by means of strain gauges and accelerometers, high-speed video as well as optical 3D-measurements using the method of projected fringes in combination with close range photogrammetry. The measured strain and deceleration values are presented and compared with the calculated results. T2 - 53rd INMM Annual meeting CY - Orlando, FL, USA DA - 15.07.2012 KW - INMM 53rd annual meeeting PY - 2012 SP - 1 EP - 7 AN - OPUS4-26417 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -