TY - CONF A1 - Maiwald, Michael T1 - Chancen der Prozessanalyitk T2 - Kolloquium, Wacker Chemie AG CY - Burghausen, Germany DA - 2009-03-23 PY - 2009 AN - OPUS4-19237 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Die aktualisierte Technologie-Roadmap Prozess-Sensorik 2015+ T2 - eingeladener Vortrag NAMUR Hauptsitzung 2009 CY - Bad Neuenahr, Germany DA - 2009-11-04 PY - 2009 AN - OPUS4-20024 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozessanalytik 2009 - Stand und Tendenzen T2 - Spectaris Laborforum 2009 "Quo vadis Prozessanalytik" CY - Frankfurt am Main, Germany DA - 2009-11-10 PY - 2009 AN - OPUS4-20157 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hergeth, W.-D. A1 - Maiwald, Michael T1 - Trends in der Prozessanalytik: Von der Forschung zur industriellen Anwendung KW - Prozessanalytik KW - Produktqualität PY - 2009 DO - https://doi.org/10.1002/cite.200950241 SN - 0009-286X SN - 1522-2640 VL - 81 IS - 8 SP - 1098 EP - 1099 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-20258 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Die aktualisierte Technologie - Roadmap "Prozess-Sensoren 2015+" T2 - Arbeitskreis Prozessanalytik CY - Göttingen, Germany DA - 2009-11-20 PY - 2009 AN - OPUS4-20305 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael T1 - Technologie-Roadmap Prozess-Sensoren 2015+ N2 - Die Wettbewerbsfähigkeit der Chemisch-Pharmazeutischen Industrie basiert auf der Sicherung der geforderten Produktqualität bei einer optimalen Nutzung von Anlagen, Rohstoffen und Energie. Eine gute Prozessführung unter Einsatz zuverlässiger Prozessautomation sichert hier den globalen Wettbewerbsvorteil. Initiiert von NAMUR und GMA und unter Mitwirkung der Unternehmen ABB, BASF, BTS, BIS Prozesstechnik, E+H, Siemens und der BAM entstand jetzt die grundlegend aktualisierte und überarbeitete Technologie-Roadmap "Prozess-Sensoren 2015+", die im November 2009 veröffentlicht wurde. KW - Roadmap KW - Prozess-Sensoren KW - Prozessanalytik KW - Process sensors KW - Process analytics PY - 2010 SN - 0178-2320 VL - 52 IS - 1-2 SP - 40 EP - 45 PB - Oldenbourg-Industrieverl. CY - München AN - OPUS4-20916 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael T1 - Die Sensorik von morgen - Anforderungen und Entwicklungsziele zeigt die Technologie-Roadmap Prozess-Sensoren 2015+ PY - 2010 SN - 0946-2856 VL - 17 IS - 3 SP - 54 EP - 56 PB - Vogel CY - Würzburg AN - OPUS4-21043 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael T1 - Vision oder Mission? - Wie neue Technologie aus der Technologie-Roadmap Prozess-Sensoren 2015+ entsteht PY - 2010 SN - 1436-2597 VL - 13 IS - 11 SP - 21 EP - 24 PB - GIT-Verl. CY - Darmstadt AN - OPUS4-22384 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Vision oder Mission?- Wie die neue Technologie aus der Technologie- Roadmap Prozess-Sensoren 2015+ entsteht T2 - ProcessNet jahrestagung 2010 und 28. DECHAMA- Jahrestagung der Biotechnologen CY - Aachen, Germany DA - 2010-09-21 PY - 2010 AN - OPUS4-22666 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Analytische Methoden für das Polymorphiescreening in der pharmazeutischen Entwicklung T2 - Abschlussvortrag, Doktorandenseminar Attendorn CY - Attendorn, Germany DA - 2011-02-27 PY - 2011 AN - OPUS4-23292 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozesskontrolle mittels MR-NMR: Erste Ergebnisse T2 - Doktorandentagung Attendorn CY - Attendorn, Germany DA - 2011-02-27 PY - 2011 AN - OPUS4-23293 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozeßanalytik mit Online-NMR-Spektroskopie - geht das? T2 - Bruker Anwendertreffen CY - Ettlingen, Germany DA - 2008-11-12 PY - 2008 AN - OPUS4-18518 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Quantitative Online-NMR-Spektroskopie für die Prozessanalytik T2 - Tag der Chemie CY - Potsdam, Germany DA - 2009-06-04 PY - 2009 AN - OPUS4-19280 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Böttinger, W. A1 - Maiwald, Michael A1 - Hasse, H. ED - Renon, H. T1 - Online NMR spectroscopic study of species distribution in MEA-H2O-CO2 and DEA-H2O-CO2 KW - Amine KW - MEA KW - DEA KW - NMR KW - Speciation PY - 2008 DO - https://doi.org/10.1016/j.fluid.2007.09.017 SN - 0378-3812 VL - 263 IS - 2 SP - 131 EP - 143 PB - Elsevier CY - Amsterdam AN - OPUS4-19359 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Böttinger, W. A1 - Maiwald, Michael A1 - Hasse, H. T1 - Online NMR spectroscopic study of species distribution in MDEA-H2O-CO2 and MDEA-PIP-H2O-CO2 PY - 2008 DO - https://doi.org/10.1021/ie800914m SN - 0888-5885 SN - 1520-5045 VL - 47 IS - 20 SP - 7917 EP - 7926 PB - American Chemical Society CY - Washington, DC AN - OPUS4-19360 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Trends in der Prozessanalytik: Von der Forschung zur industriellen Anwendung T2 - ProcessNet Jahrestagung CY - Mannheim, Germany DA - 2009-09-08 PY - 2009 AN - OPUS4-19378 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Maiwald, Michael A1 - Steinhof, O. A1 - Sleigh, C. A1 - Bernstein, M. A1 - Hasse, H. ED - Ulrike Holzgrabe, ED - Iwona Wawer, ED - Bernd Diehl, T1 - Quantitative high-resolution online NMR spectroscopy in pharmaceutical reaction and process monitoring KW - On-line technique KW - PAT KW - Hyphenation KW - Residence time PY - 2008 SN - 978-0-444-53173-5 IS - Chapter 8 SP - 471 EP - 491 PB - Elsevier AN - OPUS4-19343 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Das ideale Informationsmanagement für Labor und Produktion T2 - ANAKON CY - Berlin, Germany DA - 2009-03-17 PY - 2009 AN - OPUS4-19506 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozessverständnis mit quantitativer NMR-Spektroskopie T2 - Symposium "10 Jahre NMR im Chemieingenieurwesen" CY - Karlsruhe, Germany DA - 2009-07-02 PY - 2009 AN - OPUS4-19557 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozessverständnis mit quantitativer NMR-Spektroskopie T2 - Zentralabteilung für chemische Analysen, Arbeitskolloquium CY - Jülich, Germany DA - 2009-12-04 PY - 2009 AN - OPUS4-20591 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hergeth, W.-D. A1 - Maiwald, Michael T1 - Trends in der Prozessanalytik - Von der Forschung zur industriellen Anwendung KW - Prozessanalytik KW - Sensoren KW - Polymerisation KW - Raman-Spektroskopie PY - 2009 SN - 0947-4188 IS - 22 SP - 16 PB - GIT-Verl. CY - Darmstadt AN - OPUS4-20523 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Maiwald, Michael A1 - Gasch, A. A1 - Gerlach, M. A1 - Kaiser, U. A1 - Kloska, M. A1 - Matalla, N. A1 - Morr, W. A1 - Panzke, R. A1 - Stieler, S. A1 - Westerkamp, D. T1 - Prozess-Sensoren 2015+ - Technologie-Roadmap für Prozess-Sensoren in der chemisch-pharmazeutischen Industrie PY - 2009 SP - 1 EP - 71 AN - OPUS4-20699 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael T1 - Die Sensorik von morgen N2 - Damit Prozesssensoren fit für die Zukunft werden, müssen sie robuster, genauer und dazu noch inlinefähig werden. Welche Anforderungen die Anwender noch an die Sensorik haben, geht aus der Technologie-Roadmap Prozess-Sensoren 2015+ hervor. PY - 2010 SN - 0344-1733 SN - 1610-8256 VL - 34 IS - Juni SP - 34 EP - 36 PB - Vogel CY - Würzburg AN - OPUS4-21873 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Online NMR-Spektroskopie in der Prozessanalytik T2 - Seminar des Institutes für technische Chemie ( eingeladener Vortrag), Universität Stuttgart CY - Stuttgart, Germany DA - 2011-07-05 PY - 2011 AN - OPUS4-24103 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Investigations of Flow in Quantitative NMR T2 - EUROMAR2011 CY - Frankfurt am Main, Germany DA - 2011-08-21 PY - 2011 AN - OPUS4-24303 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - On-line NMR -Spektroskopie in der Prozessanalytik T2 - Moderne Methoden der NMR-Spektroskopie, Universität Tübingen CY - Tübingen, Germany DA - 2011-10-10 PY - 2011 AN - OPUS4-25153 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Neuste Entwicklungen und Einsatzgebiete der Online-NMR-Spektroskopie T2 - 2. VDI-Fachkonferenz Prozessanalytische Messtechnik in der Chemieindustrie CY - Frankfurt am Main, Germany DA - 2012-02-29 PY - 2012 AN - OPUS4-25566 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael A1 - Daum, Werner T1 - Trends in der prozessanalytischen Messtechnik N2 - Eine gleich bleibend effektive Nutzung von Anlagen, Rohstoffen und Energie in Verbindung mit der optimalen Prozessführung sind die wichtigsten Voraussetzungen für globale Wettbewerbsvorteile der Prozessindustrie. Unternehmen aus den Bereichen Chemie, Pharmazie, Petrochemie, Gasverarbeitung, Lebensmittel-, Zellstoff-, Papier-, Glas-, Stahl- und Zementherstellung sowie ihren Zulieferern haben den Einsatz zuverlässiger Prozessautomation für eine gute Prozessführung erkannt. Überlegene Verfahren stützen sich zunehmend auf prozessanalytische Messtechnik zur Kontrolle und präventiven Sicherstellung der geforderten Produktqualität. Gleichzeitig ermöglicht sie eine ständige Verbesserung des Wissens über den Prozess und erhöhen die Prozess- und Anlagensicherheit. PY - 2011 DO - https://doi.org/10.1524/teme.2011.9026 SN - 0340-837X SN - 0178-2312 SN - 0171-8096 VL - 78 IS - 12 SP - 547 EP - 548 PB - Oldenbourg CY - München AN - OPUS4-25262 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael ED - Gerlach, G. ED - Schütze, A. T1 - Anforderungen an Sensoren für die chemische Verfahrenstechnik N2 - Eine stets optimale Nutzung von Anlagen, Rohstoffen und Energie in Verbindung mit einer guten Prozessführung sind die wichtigsten Voraussetzungen für globale Wettbewerbsvorteile der Chemisch Pharmazeutischen Industrie und für die Branchen Energieerzeugung, Petrochemie, Nahrungsmittel, Papier- und Zellstoff oder Wasserversorgung. Überlegene Verfahren erfordern die fortwährende Kontrolle der geforderten Produktqualität, ihre präventive Sicherstellung und eine ständige Verbesserung des Wissens über den Prozess. Sensoren helfen dabei, alle wichtigen Messgrößen an kritischen Stellen transparent zu machen. Sie sind die 'Sinnesorgane der Prozessleittechnik' für automatisierte Verfahren. Allein aufgrund stetig wachsender Anforderungen an Sensoren ergibt sich für viele Messaufgaben die Notwendigkeit einer ständigen Verbesserung der Sensoren. Für völlig neue Aufgaben müssen jedoch neue Messprinzipien gefunden werden, weil heute noch keine Sensor-Technologie existiert oder die wachsenden Anforderungen nicht mehr allein durch Weiterentwicklung bestehender Technologien erfüllt werden können. Ende 2009 wurden Anforderungen und Wege für die konsequente Weiterentwicklung und Verbesserung von Prozess-Sensoren aus Anwendersicht aufgeschrieben. Das Projekt wurde von NAMUR und GMA initiiert und gemeinsam mit Industrieanwendern und Geräteherstellern als Technologie-Roadmap 'Prozess-Sensoren 2015+' veröffentlicht. Was ist aus den Wünschen seither geworden? Wie kann die Umsetzung dieser Entwicklungsziele von den Geräteherstellern wirtschaftlich und marktgängig erfolgen? Wie werden neuartige Forschungsziele mit der angemessenen Forschungsförderung am besten vorangebracht? T2 - 10. Dresdner Sensor-Symposium CY - Dresden, Germany DA - 05.12.2011 PY - 2011 SN - 978-3-942710-53-4 DO - https://doi.org/10.5162/10dss2011/6.1 N1 - Serientitel: Dresdner Beiträge zur Sensorik – Series title: Dresdner Beiträge zur Sensorik VL - 43 SP - 93 EP - 98 PB - TUDpress, Verlag der Wissenschaften GmbH AN - OPUS4-26242 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Maiwald, Michael T1 - Hochauflösende Online-NMR-Spektroskopie für das Reaktions- und Prozeßmonitoring - Beispiele zur Anwendung in der Verfahrenstechnik N2 - Die moderne Reaktions- und Trenntechnik in der chemischen Industrie ist eine Hochtechnologie. Die dort eingesetzten Verfahren zur Reaktionsführung und Auftrennung der Produkte sind weitestgehend optimiert. Zu diesem Stand hat die instrumentelle Analytik – speziell die Prozeßanalytik – wesentlich beigetragen. Das Reaktions- und Prozeßmonitoring ist eine wichtige Hilfe zum Verständnis der komplexen Zusammenhänge. In der vorliegenden Arbeit wird der Einsatz der NMR-Spektroskopie in verfahrenstechnischen Anwendungen wie dem Reaktions- und Prozeß-Monitoring diskutiert und alle dazu notwendigen Grundlagen erläutert. Solche Anwendungen erfordern häufig Techniken, mit denen hochaufgelöste Spektren zerstörungsfrei aufgenommen werden können, oft bei erhöhtem Druck und erhöhter Temperatur. Neben der quantitativen Bestimmung der Zusammensetzung komplexer reagierender Mischungen besteht gleichzeitig die Möglichkeit zur Identifikation von Nebenprodukten. Dieses gelingt insbesondere durch die Nutzung der NMR-Spektroskopie als Online-Methode, die in der Literatur bislang nur in wenigen Einzelfällen beschrieben und trotz ihrer enormen Möglichkeiten noch nicht konsequent angewendet wird. Durch die fortschreitende Entwicklung auf dem Gebiet der NMR-Spektroskopie kann eine Online-Anbindung heute durchgehend mit Hilfe kommerziell erhältlicher Komponenten erfolgen – wie die vorliegende Arbeit zeigt. Fallende Kosten in der Beschaffung und dem Betrieb leistungsfähiger NMR-Spektrometer machen die Methode auch im verfahrenstechnischen Umfeld mittlerweile sehr attraktiv. Die Attraktivität der Methode gewinnt neuerdings insbesondere durch die erweiterten Einsatzmöglichkeiten kompakterer NMR-Magneten mit geringen Streufeldern. Obwohl sich in den Ingenieurwissenschaften damit vielfältige Einsatzmöglichkeiten ergeben, wird die NMR-Spektroskopie dort bislang noch leider kaum genutzt. Besondere Herausforderungen stellen sich u. a. dadurch, daß sich weder deuterierten Komponenten einsetzen lassen noch die Probe in einer geeigneten Weise in einer Probenvorbereitung verändert werden kann. Damit kommen hochkonzentrierte Mischungen zur direkten Untersuchung. Dieses hat signifikante Rückwirkungen auf die einzusetzende NMR-Methodik, die im Rahmen der Arbeit umfassend untersucht wurde. In der Regel lassen sich die Probleme bei entsprechender experimenteller Vorgehensweise umgehen. Zur Garantie quantitativer Meßwerte wurden alle eingesetzten Meß- und Auswertungsstrategien ausführlich untersucht und teilweise erweitert. Um quantitativ aussagekräftige Online-NMR-Spektren mit Hilfe der 1H- und 13C-NMRSpektroskopie von technischen Mischungen zu erhalten, wurden folgende Aufgaben gelöst: Entwicklung und Validierung von Vorgehensweisen zur Messung hochkonzentrierter, technischer Mischungen ohne Probenvorbereitung und ohne Zusatz deuterierter Komponenten; Konstruktion geeigneter Apparaturen zur Untersuchung von Reaktionsgleichgewichten und -kinetiken für verschiedene Druck- und Temperaturbereiche, die sich optimal für die Online-NMR-Spektroskopie einsetzen lassen; Ankopplung der NMR-Spektrometers an die unterschiedlichen Apparate mit Hilfe von NMR-Durchflußzellen; Schaffung einer möglichst noninvasiven Untersuchungsmethode hinsichtlich aller Probenparameter (z. B. Druck, Temperatur); Schaffung und Erprobung von Meß- und Auswertungsstrategien im Hinblick auf quantitative Parameter, Erweiterung des zugänglichen Druck- und Temperaturbereiches der Messungen sowie Verkürzung des Zeitfensters für Messungen durch geeignete Peripherie und konstruktiven Veränderungen am NMR-Probenkopf. Als Beispiel werden Messungen an binären und ternären flüssigen Mischungen aus Formaldehyd, Wasser und Methanol diskutiert. In diesen Systemen ist Formaldehyd fast ausschließlich in Poly(oxymethylen)Glykolen und -hemiformalen chemisch gebunden. Die chemischen Reaktionen in formaldehydhaltigen Mischungen bestimmen deren thermodynamisches Verhalten sowie ihre Trennung mit thermischen Verfahren. Die NMR-Spektroskopie ist das zentrale analytische Verfahren, mit dem sich diese Vorgänge aufklären und quantifizieren lassen. Für die hier vorgestellten Untersuchungen zum Prozeßmonitoring kamen u. a. eine Online-NMRKopplung mit einem Dünnschichtverdampfer sowie mit einem Rührreaktor zum Einsatz. In weiteren Anwendungsbeispielen zum Thema Formaldehyd wird aufgezeigt, daß sich die Online-NMR-Spektroskopie auch zum Studium komplexer Reaktionsnetzwerke, zur Messung von Gaslöslichkeiten oder zur Quantifizierung kleinster Produktmengen unter schwierigen, technischen Reaktionsbedingungen eignet. Ferner werden Arbeiten zur Aufklärung und Quantifizierung der chemischen Prozesse bei der Absorption von Kohlendioxid in wässrigen Aminlösungen bei Drücken bis zu 30 bar und reaktionskinetische Untersuchungen von Veresterungen vorgestellt, bei denen auch ein Vergleich mit einer GC-Analytik durchgeführt wurde. Ebenso wird gezeigt, daß sich die Online-NMR-Spektroskopie zur Beobachtung von Reaktionen in Ionischen Flüssigkeiten eignet. Ein Teil der Arbeit beschäftigt sich mit der Untersuchung fluider Mischungen bei hohen Drücken. Beispielhaft werden Arbeiten zu H-Brückengleichgewichten von Methanol in überkritischem Kohlendioxid vorgestellt, die eine wertvolle, experimentelle Datenbasis zur Überprüfung molekulardynamischer Modelle in der molekularen Simulation liefern. Für die meisten Anwendungsbeispiele werden neue Reaktoren und Meßapparaturen vorgestellt, die sich besonders für den Einsatz in der Durchfluß-NMR-Spektroskopie eignen. Schließlich wird kurz auf die Anwendung der NMR-Spektroskopie zur Bestimmung physikalisch chemischer Größen eingegangen, wie z. B. zur Bestimmung von Diffusuionskoeffizienten in technischen Mischungen. Erstmals wird der Einsatz der Methode in der Taylor-Dispersionstechnik beschrieben und experimentell belegt. KW - Kernresonanzspektroskopie KW - Online-NMR-Spektroskopie KW - Prozessverfolgung KW - Reaktionsmonitoring KW - Kohlenstoff-13-NMR-Spektroskopie KW - NMR-Spektroskopie KW - Protonen-NMR-Spektroskopie KW - Prozessanalytik KW - Verfahrensentwicklung PY - 2012 UR - https://kluedo.ub.uni-kl.de/frontdoor/index/index/docId/3213 SN - 978-3-95404-136-7 SP - 1 EP - 189 PB - Cuvillier CY - Göttingen AN - OPUS4-26310 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozessanalytik: Konzepte und Strategien Prozessanalytik in Flüssigkeiten (Hardwareüberblick) T2 - Prozessanalytik: Konzepte und Strategien CY - Frankfurt am Main, Germany DA - 2011-10-19 PY - 2011 AN - OPUS4-24979 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - On-line NMR-Spektroskopie in der prozessanalytik T2 - Moderne Methoden der NMR-Spektroskopie, Universität Tübingen CY - Tübingen, Germany DA - 2011-10-10 PY - 2011 AN - OPUS4-24980 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozess-Spektroskopie Einführung in die spektroskopischen methoden der Prozessanalytik T2 - Frühjahrsschule "Industrielle Analytik" Universität Ulm CY - Ulm, Germany DA - 2012-03-19 PY - 2012 AN - OPUS4-26708 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozessanalytik 2012 Stand&Tendenzen T2 - Frühjahrsschule "Industrielle Analytik" Universität Ulm CY - Ulm, Germany DA - 2012-03-19 PY - 2012 AN - OPUS4-26709 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozessanalytik: Konzepte und Strategien - Prozessanalytik in Flüssigkeiten T2 - GDCh-PAT-Weiterbildungsmodul "Konzepte und Strategien" 2012 CY - Frankfurt am Main, Germany DA - 2012-10-23 PY - 2012 AN - OPUS4-27028 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozessanalytik 2012 Stand&Tendenzen T2 - Teilchengrößenanalytik in Prozessen: Messtechniken für Emulsionen und Suspensionen CY - Potsdam, Germany DA - 2012-10-10 PY - 2012 AN - OPUS4-27029 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael A1 - Bremser, Wolfram A1 - Ostermann, Markus A1 - Paul, Andrea A1 - Zientek, Nicolai T1 - Wissen über die gesamte Prozesskette N2 - Um ressourcenschonend und sicher zu produzieren, ist es erforderlich, chemische Prozesse entlang der gesamten Wertschöpfungskette zu verfolgen. Prozessanalytik muss bereits bei den Rohstoffen einsetzen und sämtliche Schritte prüfen. Dies erfordert neue Methoden und verfeinerte Messtechnik. PY - 2013 DO - https://doi.org/10.1002/nadc.201390052 SN - 1439-9598 SN - 1521-3854 VL - 61 IS - 2 SP - 149 EP - 152 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-28268 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Quantitative NMR spectroscopy for Gas Analysis T2 - Gas 2013 Konferenz CY - Rotterdam, Netherlands DA - 2013-06-05 PY - 2013 AN - OPUS4-29305 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Determination of methanol in FAME by Near Infrared Spectroscopy (NIRS) and qNMR T2 - Gas 2013 Konferenz CY - Rotterdam, Netherlands DA - 2013-06-05 PY - 2013 AN - OPUS4-29306 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kloska, M. A1 - Maiwald, Michael T1 - Scharfe Überwachung der Zusammensetzung - Die Prozessanalysentechnik (PAT) feiert in diesem Jahr 100. Geburtstag N2 - Vor 100 Jahren, am 22. Mai 1913, erhielt Dr. Paul Gmelin, Mitarbeiter im physikalischen Laboratorium der Badischen Anilin und Soda Fabrik in Ludwigshafen das erste Patent auf ein Prozessanalysenmessgerät. Dieses Jubiläum würdigt CITplus mit diesem Beitrag, in dem die Autoren nicht nur die vergangene sondern auch eine mögliche künftige Entwicklung der Prozessanalysentechnik (PAT) Revue passieren lassen. PY - 2013 SN - 1436-2597 SN - 1439-0663 VL - 16 IS - 11 SP - 6 EP - 8 PB - GIT-Verl., Wiley-VCH CY - Weinheim AN - OPUS4-29600 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - 100 Jahre Prozessanalytik - Vom Pfeifenanalysator zur wissensbasierten Produktion T2 - PRORA 2013 Fachtagung Prozessnahe Röntgenanalytik CY - Berlin, Germany DA - 2013-11-21 PY - 2013 AN - OPUS4-29602 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zientek, Nicolai A1 - Meyer, Klas A1 - Panne, Ulrich A1 - Kraume, M. A1 - Maiwald, Michael T1 - Untersuchung der Auflösungskinetik von pharmazeutischen Cokristallen mittels Onlilne-NMR-Spektroskopie N2 - Bei der Entwicklung pharmazeutischer Wirkstoffe werfen Substanzen mit einer geringen Löslichkeit, Auflösungsrate und damit einhergehend schlechten Bioverfügbarkeit immer größere Probleme auf. Diese Eigenschaften und nicht etwa toxikologische Eigenschaften oder schlechte Wirksamkeit sorgen dafür, dass es weniger als 1 % aller Wirkstoffe bis in die Markteinführung schaffen. Eine Reihe von Ansätzen zur Verbesserung der schlechten Wasserlöslichkeit konnten bereits etabliert werden. Hierunter zählen die gezielte Salzbildung bzw. Salzscreening, Solubilisierung mit Cosolventien oder die Nutzung von Polymeren als mögliche Transportwege. Eine weitere Möglichkeit bietet die Bildung verschiedener polymorpher Formen, sowohl der Einzelkomponente als auch von den verschiedenen Mehrkomponentenverbindungen. T2 - 7. Interdisziplinäres Doktorandenseminar CY - Berlin, Germany DA - 24.02.2013 KW - Quantitative Online-NMR-Spektroskopie KW - Pharmazeutische Cokristalle PY - 2013 SN - 978-3-9815360-9-6 SP - 9 EP - 11 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) AN - OPUS4-28266 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael A1 - Soruco Aloisio, Ricardo A1 - Meyer, Klas A1 - Klaus, Christian T1 - Auf dem Weg zu einer digitalen Qualitätsinfrastruktur - Eine Labor-Testplattform für die Integration von Sensoren und Messgeräten N2 - Um die internationale Spitzenposition deutscher Unternehmen der Prozessindustrie auch in Zukunft sicher zu stellen, müssen die Unternehmen ihre Prozesse und Geschäftsabläufe digitalisieren und gemeinsam mit der Forschung innovative neue Methoden, Apparate, Anlagen, Sensoren und Automatisierungstechnik sowie Datenkonzepte entwickeln. All dies erfordert den Aufbau neuer Fähigkeiten, Investition in Talente, interdisziplinäre Kommunikation zwischen verschiedenen Personen und Abteilungen und eine Bereitschaft zur Veränderung. KW - QI-Digital KW - Wasserstofftankstelle KW - IT-OT-Testplattform KW - Prozessindustrie PY - 2023 VL - 67 IS - 9 SP - 20 EP - 23 PB - Wiley-VCH CY - Weinheim AN - OPUS4-58461 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fricke, F. A1 - Brandalero, M. A1 - Liehr, Sascha A1 - Kern, Simon A1 - Meyer, Klas A1 - Kowarik, Stefan A1 - Hierzegger, R. A1 - Westerdick, S. A1 - Maiwald, Michael A1 - Hübner, M. T1 - Artificial Intelligence for Mass Spectrometry and Nuclear Magnetic Resonance Spectroscopy Using a Novel Data Augmentation Method N2 - Mass Spectrometry (MS) and Nuclear Magnetic Resonance Spectroscopy (NMR) are valuable analytical and quality control methods for most industrial chemical processes as they provide information on the concentrations of individual compounds and by-products. These processes are traditionally carried out manually and by a specialist, which takes a substantial amount of time and prevents their utilization for real-time closed-loop process control. This paper presents recent advances from two projects that use Artificial Neural Networks (ANNs) to address the challenges of automation and performance-efficient realizations of MS and NMR. In the first part, a complete toolchain has been realized to develop simulated spectra and train ANNs to identify compounds in MS. In the second part, a limited number of experimental NMR spectra have been augmented by simulated spectra, to train an ANN with better prediction performance and speed than state-of-the-art analysis. These results suggest that, in the context of the digital transformation of the process industry, we are now on the threshold of a strongly simplified use of MS and MRS and the accompanying data evaluation by machine-supported procedures, and can utilize both methods much wider for reaction and process monitoring or quality control. KW - Industry 4.0 KW - Cyber-Physical Systems KW - Artificial Neural Networks KW - Mass Spectrometry KW - Nuclear Magnetic Resonance Spectroscopy KW - Modular Production PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-539412 UR - https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=9638378 DO - https://doi.org/10.1109/TETC.2021.3131371 SN - 2168-6750 VL - 10 IS - 1 SP - 87 EP - 98 PB - IEEE AN - OPUS4-53941 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bornemann-Pfeiffer, Martin A1 - Kern, Simon A1 - Maiwald, Michael A1 - Meyer, Klas T1 - Calibration-Free Chemical Process and Quality Control Units as Enablers for Modular Production N2 - Modular chemical production is a tangible translation of the digital transformation of the process industry for specialty chemicals. In particular, it enables the speeding-up of process development and thus a quicker time to market by flexibly connecting and orchestrating standardised physical modules and bringing them to life (i.e., parameterising them) with digitally accumulated process knowledge. We focus on the specific challenges of chemical process and quality control, which in its current form is not well suited for modular production and provide possible approaches and examples of the change towards direct analytical methods, analytical model transfer or machine-supported processes. KW - Modular Production KW - Chemical Process Control KW - Process Analytical Technology KW - Digital Transformation KW - Industry 4.0 PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-517264 DO - https://doi.org/10.1002/cite.202000150 SN - 1522-2640 VL - 93 IS - 1-2 SP - 62 EP - 70 PB - Wiley-VCH CY - Weinheim AN - OPUS4-51726 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gottu Mukkula, A. R. A1 - Kern, Simon A1 - Salge, M. A1 - Holtkamp, M. A1 - Guhl, Svetlana A1 - Fleischer, C. A1 - Meyer, Klas A1 - Remelhe, M. A1 - Maiwald, Michael A1 - Engell, S. T1 - An Application of Modifier Adaptation with Quadratic Approximation on a Pilot Scale Plant in Industrial Environment N2 - The goal of this work is to identify the optimal operating input for a lithiation reaction that is performed in a highly innovative pilot scale continuous flow chemical plant in an industrial environment, taking into account the process and safety constraints. The main challenge is to identify the optimum operation in the absence of information about the reaction mechanism and the reaction kinetics. We employ an iterative real-time optimization scheme called modifier adaptation with quadratic approximation (MAWQA) to identify the plant optimum in the presence of plant-model mismatch and measurement noise. A novel NMR PAT-sensor is used to measure the concentration of the reactants and of the product at the reactor outlet. The experiment results demonstrate the capabilities of the iterative optimization using the MAWQA algorithm in driving a complex real plant to an economically optimal operating point in the presence of plant-model mismatch and of process and measurement uncertainties. KW - Process Analytical Technology KW - Online NMR Spectroscopy KW - Process Industry KW - Iterative real-time optimization KW - Modifier adaptation KW - Plant-model mismatch KW - Reactor control KW - CONSENS PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-524531 DO - https://doi.org/10.1016/j.ifacol.2020.12.685 SN - 1522-2640 VL - 53 IS - 2 SP - 11773 EP - 11779 PB - Elsevier CY - Amsterdam AN - OPUS4-52453 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bruno, Francesco A1 - Fiorucci, Letizia A1 - Vignoli, Alessia A1 - Meyer, Klas A1 - Maiwald, Michael A1 - Ravera, Enrico T1 - pyIHM: Indirect Hard Modeling, in Python N2 - NMR is a powerful analytical technique that combines an exquisite qualitative power, related to the unicity of the spectra of each molecule in a mixture, with an intrinsic quantitativeness, related to the fact that the integral of each peak only depends on the number of nuclei (i.e., the amount of substance times the number of equivalent nuclei in the signal), regardless of the molecule. Signal integration is the most common approach in quantitative NMR but has several drawbacks (vide infra). An alternative is to use hard modeling of the peaks. In this paper, we present pyIHM, a Python package for the quantification of the components of NMR spectra through indirect hard modeling, and we discuss some numerical details of the implementation that make this approach robust and reliable. KW - Algorithms KW - Chemical Structure KW - Deconvolution KW - Mixtures KW - NMR spectroscopy PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-626793 DO - https://doi.org/10.1021/acs.analchem.4c06484 SN - 1520-6882 VL - 97 IS - 8 SP - 4598 EP - 4605 PB - ACS Publications CY - Washington D.C. AN - OPUS4-62679 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Messverfahren für Wasserstoff: Qualität durch Zertifizierung – Standortvorteile in Deutschland N2 - Die Veranstaltungsreihe "Neue Märkte erschließen – mit Normen und Standards hoch hinaus", die vom DIN gemeinsam mit der NOW GmbH organisiert wird, richtets sich vorwiegend an KMUs. Fokus der Veranstaltung sind Messverfahren für Wasserstoff. Der Beitrag der BAM führt sehr kurz die Rolle nationaler und internationaler Normung sowie weltweiter Metrologie im Rahmen der Meterkonvention bezüglich analytischer Qualitätssicherung und Zertifizierung von Gasen und Referenzmaterialien ein. Es werden aktuelle Beispiele für die Qualitätssicherung von Wasserstoff, mögliche dazu notwendige Ausrüstung und weiterführende Literaturquellen vorgestellt. T2 - Neue Märkte erschließen – mit Normen und Standards hoch hinaus CY - Online meeting DA - 18.03.2021 KW - Wasserstoff KW - Normung KW - Standortvorteil KW - Analytik KW - Wasserstoffanalytik KW - Wasserstoff Referenzmaterial KW - Gasanalytik PY - 2021 AN - OPUS4-52296 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eifert, T. A1 - Eisen, K. A1 - Maiwald, Michael A1 - Herwig, C. T1 - Current and future requirements to industrial analytical infrastructure—part 2: smart sensors N2 - Complex processes meet and need Industry 4.0 capabilities. Shorter product cycles, flexible production needs, and direct assessment of product quality attributes and raw material attributes call for an increased need of new process analytical technologies (PAT) concepts. While individual PAT tools may be available since decades, we need holistic concepts to fulfill above industrial needs. In this series of two contributions, we want to present a combined view on the future of PAT (process analytical technology), which is projected in smart labs (Part 1) and smart sensors (Part 2). Part 2 of this feature article series describes the future functionality as well as the ingredients of a smart sensor aiming to eventually fuel full PAT functionality. The smart sensor consists of (i) chemical and process information in the physical twin by smart field devices, by measuring multiple components, and is fully connected in the IIoT 4.0 environment. In addition, (ii) it includes process intelligence in the digital twin, as to being able to generate knowledge from multi-sensor and multi-dimensional data. The cyber-physical system (CPS) combines both elements mentioned above and allows the smart sensor to be self-calibrating and self-optimizing. It maintains its operation autonomously. Furthermore, it allows—as central PAT enabler—a flexible but also target-oriented predictive control strategy and efficient process development and can compensate variations of the process and raw material attributes. Future cyber-physical production systems—like smart sensors—consist of the fusion of two main pillars, the physical and the digital twins. We discuss the individual elements of both pillars, such as connectivity, and chemical analytics on the one hand as well as hybrid models and knowledge workflows on the other. Finally, we discuss its integration needs in a CPS in order to allow is versatile deployment in efficient process development and advanced optimum predictive process control. KW - Smart sensors KW - Industry 4.0 KW - Digital twins KW - Process intelligence KW - Process analytical technology KW - Physical twin KW - Cyber-physical system PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-503980 DO - https://doi.org/10.1007/s00216-020-02421-1 SN - 1618-2642 VL - 412 IS - 9 SP - 2037 EP - 2045 PB - Springer CY - Berlin Heidelberg AN - OPUS4-50398 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eisen, K A1 - Eifert, T A1 - Herwig, C A1 - Maiwald, Michael T1 - Current and future requirements to industrial analytical infrastructure—part 1: process analytical laboratories N2 - The competitiveness of the chemical and pharmaceutical industry is based on ensuring the required product quality while making optimum use of plants, raw materials, and energy. In this context, effective process control using reliable chemical process analytics secures global competitiveness. The setup of those control strategies often originate in process development but need to be transferable along the whole product life cycle. In this series of two contributions, we want to present a combined view on the future of PAT (process analytical technology), which is projected in smart labs (part 1) and smart sensors (part 2). In laboratories and pilot plants, offline chemical analytical methods are frequently used, where inline methods are also used in production. Here, a transferability from process development to the process in operation would be desirable. This can be obtained by establishing PAT methods for production already during process development or scale-up. However, the current PAT (Bakeev 2005, Org Process Res 19:3–62; Simon et al. 2015, Org Process Res Dev 19:3–62) must become more flexible and smarter. This can be achieved by introducing digitalization-based knowledge management, so that knowledge from product development enables and accelerates the integration of PAT. Conversely, knowledge from the production process will also contribute to product and process development. This contribution describes the future role of the laboratory and develops requirements therefrom. In part 2, we examine the future functionality as well as the ingredients of a smart sensor aiming to eventually fuel full PAT functionality—also within process development or scale-up facilities (Eifert et al. 2020, Anal Bioanal Chem). KW - Smart test laboratories KW - Laboratory 4.0 KW - Sustainable Production KW - Industry 4.0 PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-504020 DO - https://doi.org/10.1007/s00216-020-02420-2 SN - 1618-2642 VL - 412 IS - 9 SP - 2027 EP - 2035 PB - Springer CY - Berlin Heidelberg AN - OPUS4-50402 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael T1 - Integrated and Networked Systems and Processes—A Perspective for Digital Transformation in Thermal Process Engineering N2 - Separation technology as a sub-discipline of thermal process engineering is one of the most critical steps in the production of chemicals, essential for the quality of intermediate and end products. The discipline comprises the construction of facilities that convert raw materials into value-added products along the value chain. Conversions typically take place in repeated reaction and separation steps—either in batch or continuous processes. The end products are the result of several production and separation steps that are not only sequentially linked, but also include the treatment of unused raw materials, by-products and wastes. Production processes in the process industry are particularly susceptible to fluctuations in raw materials and other influences affecting product quality. This is a challenge, despite increasing fluctuations, to deliver targeted quality and simultaneously meet the increasing dynamics of the market, at least for high value fine chemicals. In order to survive successfully in a changed environment, chemical companies must tread new paths. This includes the potential of digital technologies. The full integration and intelligent networking of systems and processes is progressing hesitantly. This contribution aims to encourage a more holistic approach to the digitalization in thermal process engineering by introduction of integrated and networked systems and processes. KW - Smarter Sensor KW - Digitalisation KW - Digital transformation KW - Process Industry KW - Thermal Process Engineering KW - Digital Twins PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-504964 DO - https://doi.org/10.3390/chemengineering4010015 SN - 2305-7084 VL - 4 IS - 15 SP - 1 EP - 9 PB - MDPI CY - Basel AN - OPUS4-50496 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - van der Veen, A. M H A1 - Zalewska, E. T. A1 - Kipphardt, Heinrich A1 - Beelen, R. R. A1 - Tuma, Dirk A1 - Maiwald, Michael A1 - Fükő, J. A1 - Büki, T. A1 - Szilágyi, Z. N. A1 - Beránek, J. A1 - Cieciora, D. A1 - Ochman, G. A1 - e.t al., T1 - Metrologia International Bureau of Weights and Measures (BIPM), find out more - KEY COMPARISON International comparison CCQM-K118 natural gas N2 - CCQM-K118 was an international key comparison on natural gas composition with two types of gases, i.e., a low calorific hydrogen-enriched natural gas and a high calorific LNG type of gas. There were 14 participating laboratories. The traveling standards (i.e., 14 mixtures each) were obtained from an external source and checked for homogeneity and stability before and after the participants' measurements at the two coordinating laboratories. The data evaluation was performed using a consensus value and a laboratory effect model. The results of the participants were benchmarked against a key comparison reference value computed from the largest consistent subset (LCS) of the submitted results, adjusted for the differences between the travelling standards. For the first time in a key comparison in gas analysis, the model included a term to account for excess variability in the LCS. Most of the participants reported one or a few (slightly) discrepant results. Partly this is due to the heterogeneity and heteroscedasticity of the datasets. In all, the results in this key comparison demonstrate the good comparability of the national measurement standards for natural gas composition maintained by the participating NMIs. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA). To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database https://www.bipm.org/kcdb/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA). KW - CCQM-K PY - 2022 DO - https://doi.org/10.1088/0026-1394/59/1A/08017 SN - 0026-1394 VL - 59 IS - 1A PB - IOP Publishing LTD AN - OPUS4-56308 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Integrated and Networked Systems and Processes – A Perspective for Digital Transformation in (Bio) Process Engineering N2 - The competitiveness of the process industry is based on ensuring the required product quality while making optimum use of equipment, raw materials and energy. Chemical companies have to find new paths to survive successfully in a changing environment, while also finding more flexible ways of product and process development to bring their products to market more quickly – especially high-quality high-end products like fine chemicals or pharmaceuticals. The potential of digital technologies belongs to these. One way is knowledge-based production, taking into account all essential equipment, process and regulatory data of plants and laboratories. Today, the potential of this data is often not yet consistently used for a comprehensive understanding of production. Another approach uses flexible and modular chemical plants, which can produce different high-quality products using multi-purpose equipment with short downtimes between campaigns and reduce the time to market of new products. Digital transformation is enabling completely new production concepts that are being used increasingly. Intensified continuous production plants also allow for difficult to produce compounds. This contribution aims to encourage a more holistic approach to the digitalization and use of machine-assisted methods in (bio) process engineering by introduction of integrated and networked systems and processes, which have the potential to speed up the high-quality production of specialty chemicals and pharmaceuticals. T2 - 6th BioProScale Symposium - industrial scale bioprocess intensification from process development to large-scale understanding CY - Online meeting DA - 29.03.2021 KW - Industry 4.0 KW - Biotechnology KW - Bio engineering KW - Process Analytical Technology KW - BioProScale KW - Artificial Neural Networks PY - 2021 UR - https://biotechnologie.ifgb.de/node/648 AN - OPUS4-52371 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -