TY - GEN A1 - Streicher, Doreen A1 - Krause, Martin A1 - Kohl, Christoph A1 - Schickert, M. A1 - Kroggel, O. A1 - Müller, W. T1 - Parameters for the Quantitative Assessment of Ulrasonic Imaging for Concrete Elements N2 - Ultrasonic investigation is an established non-destructive testing method for detection of defects and material characterisation. In the last years scanning ultrasonic echo methods were developed especially for the application in civil engineering. The different scanning ultrasonic echo methods are modified with respect to the type of the transducer applied, the number and the arrangement of transducers and the frequency used. Also different algorithms are used to analyse the measured data, for instance SAFT (Synthetic Aperture Focusing Technique) reconstruction. The results are typically presented as B- and C-scans, obtained from raw data or the SAFT reconstructed data. Since 2001 several German research institutes co-operate within the scope of the research initiative Non-destructive Evaluation of Concrete Structures Using Acoustic and Electromagnetic Echo-Methods (FOR 384) supported by the Deutsche Forschungsgemeinschaft (DFG). One of the tasks is to investigate these ultrasonic echo methods for special applications like the detection of cavities in concrete structures or faults in tendon ducts. Concrete test specimens with intentional faults have been manufactured and investigated. Parameters were defined to assess the results more objectively. Currently three parameters -signal/noise-ratio, lateral edge resolution and uniformity- are considered. For the first time results of different working groups on the same imaged objects are compared quantitatively. It should help to get more knowledge about the ultrasonic inspection of typical faults in civil engineering structures. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/p050/p050.htm SN - 3-931381-49-8 SP - 1(?) EP - 12(?) PB - DGZfP CY - Berlin AN - OPUS4-2751 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schickert, M. A1 - Krause, Martin A1 - Müller, W. T1 - Ultrasonic Imaging of Concrete Elements Using Reconstruction by Synthetic Aperture Focusing Technique N2 - Ultrasonic reconstruction by the synthetic aperture focusing technique (SAFT) has a great potential to image concrete elements and detect embedded objects. Its algorithm focuses ultrasonic signals received at many aperture points by coherent superposition, yielding a high-resolution image of the region of interest. Using this approach, several problems caused by the strongly inhomogeneous structure of concrete are diminished, where scattering of transmitted pulses leads to disturbing phenomena such as attenuation and structural noise. This contribution is intended to review the work of the writers on the application of SAFT reconstruction to concrete testing. First, consequences of scattering of ultrasonic waves in concrete are qualitatively explained. Then the use of SAFT is discussed in comparison to traditional A-scan and B-scan techniques. Different reconstruction algorithms and implementations are presented for one-, two-, and three-dimensional SAFT. Pulse-echo measurement systems are described, which are able to acquire large sets of data on linear and planar apertures employing single transducer, transducer array, and scanning laser Doppler vibrometer arrangements. To illustrate the application of the SAFT techniques, examples from laboratory and field experiments are described comprising imaging of back walls, tendon ducts containing faults, layers, and reinforcement in concrete elements. KW - Imaging techniques KW - Concrete KW - Acoustic detection PY - 2003 DO - https://doi.org/10.1061/(ASCE)0899-1561(2003)15:3(235) SN - 0899-1561 SN - 1943-5533 IS - May/June SP - 235 EP - 246 PB - American Society of Civil Engineers CY - New York, NY AN - OPUS4-2752 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Altantsog, Pagvajav A1 - Ojunbileg, L. A1 - Palam, B. A1 - Tserenshimed, M. A1 - Chadraabal, Shgdariin A1 - Müller, Ralf A1 - Nofz, Marianne A1 - Gaber, Martin T1 - Some experimental results of glass melting by using sands from Buir nuur N2 - We have carried out some laboratory experiments to establish possibilities to melt 16Na2O*10CaO*74SiO2 glasses from consisting of mainly quarz sands of Buir nuur lake. When the sands used directly, the formed glasses had slight blue colour, the origin of which may be connected with aluminium and iron impurities in the sands. Presence of these impurities is confirmed by chemical analyse and ESR study data. Allso have been studied liquid gas extraction phenomena in the sands and melted glass samples and determined some physical properties of them. PY - 2002 VL - 17 SP - 107 EP - 115 AN - OPUS4-3118 LA - mon AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kolar, J. A1 - Strlic, M. A1 - Müller-Hess, D. A1 - Gruber, A. A1 - Troschke, K. A1 - Pentzien, Simone A1 - Kautek, Wolfgang T1 - Near-UV and visible pulsed laser interaction with paper N2 - The applicability of excimer laser at 308 nm and Nd:YAG laser at 532 nm with fluences below 0.86 J/cm2 for cleaning of cellulose and paper materials was evaluated. The extent of degradation of purified cotton cellulose and Fabriano paper after laser treatment as well as after a period of accelerated humid oven ageing was determined by following the changes in the degree of polymerization. While irradiation of paper with the excimer laser at 308 nm results in depolymerization of cellulose accompanied by a decrease in ISO brightness, no detrimental effects of Nd:YAG laser treatments were observed. PY - 2000 DO - https://doi.org/10.1016/S1296-2074(00)00149-7 SN - 1296-2074 SN - 1778-3674 VL - 1 IS - sup.1 SP - 221 EP - 224 PB - Elsevier CY - Paris AN - OPUS4-5979 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmelzer, J.W.P. A1 - Potapov, O. V. A1 - Fokin, V. M. A1 - Müller, Ralf A1 - Reinsch, Stefan T1 - The effect of elastic stress and relaxation on crystal nucleation in lithium disilicate glass N2 - In the framework of a general theoretical approach recently developed, the effect of elastic stresses on the rate of nucleation of crystallites of critical sizes in the process of crystallization of lithium disilicate glasses is studied. Hereby both the evolution of elastic stresses – due to changes in the specific volume of the crystallizing system (i.e., differences in the densities of the melt and the crystal) – and their relaxation – connected with viscous flow – are taken into consideration. If the classical theory of nucleation is employed for the determination of the nucleation rates (modified by taking into account elastic stresses), elastic stresses may lead, for the system under consideration, to a decrease of the nucleation rate by up to two orders of magnitude. As shown, the theory allows an at least qualitatively correct incorporation of the effect of elastic stresses and stress relaxation into the description of nucleation phenomena in glass-forming melts. PY - 2004 DO - https://doi.org/10.1016/j.jnoncrysol.2003.10.002 SN - 0022-3093 VL - 333 IS - 2 SP - 150 EP - 160 PB - North-Holland Publ. Co. CY - Amsterdam AN - OPUS4-6236 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller-Hess, D. A1 - Troschke, K.K. A1 - Kolar, J. A1 - Strlic, M. A1 - Kautek, Wolfgang A1 - Pentzien, Simone T1 - Laserreinigung von Papier - Zwischenbericht des Eurocare-Projektes 1681 LACLEPA PY - 2001 SN - 0933-4017 IS - 8 SP - 604 EP - 610 PB - Callwey CY - München AN - OPUS4-6282 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nakagami, M. A1 - Quercetti, Thomas A1 - Komatsuki, S. A1 - Fujisawa, K. A1 - Nishio, T. A1 - Musolff, André A1 - Müller, Karsten A1 - Droste, Bernhard T1 - Waste container drop tests onto a concrete target N2 - The paper presents technical details of the drop test performance as well as some experimental results of tests carried out with the Japanese 'Yoyushindo-disposal' waste container for intermediate depth disposal. The tests were accompanied by various metrology to collect data as basis for safety assessment. T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Waste container KW - Drop test KW - Concrete target PY - 2010 SP - 1 EP - 8 (Paper 367) AN - OPUS4-27045 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Marzok, Ulrich A1 - Müller, Ralf A1 - Schadrack, Reinhard A1 - Krauhausen, M. A1 - Burgstedt, F. A1 - Brode, W. A1 - Reetz, R. T1 - Hochtemperatur-Laserprofilometrie an keramischen Bauteilen N2 - Hochleistungssinterwerkstoffe spielen eine wachsende Rolle in derzeitigen Schlüsseltechnologien wie der Mikrosystem-, Informations-, Kommunikations- und Medizintechnik. Dabei steigen die Anforderungen an die präzise Steuerung der Sinterung. Besonders für komplexe, gradierte oder heterogen zusammengesetzte Formkörper wie zum Beispiel keramische LTCC-Multilayer für die Mikrosystemtechnik hat die exakte Beherrschung dieses Prozessschrittes wesentlichen Einfluss auf die Maßhaltigkeit, mechanische Integrität und Zuverlässigkeit der gesinterten Bauteile. Bedingt durch die Heterogenität der mehrlagigen und mit Leit- und anderen Funktionspasten bedruckten Sinterkörper hinsichtlich ihrer sinterphysikalischen oder thermischen Eigenschaften können bleibende oder temporäre Verwerfungen beim Schrumpfungsprozess auftreten, wobei letztere unter Umständen Ursache latenter Fehler im späteren Bauteil sind. PY - 2013 SN - 0173-9913 SN - 0196-6219 VL - 90 IS - 3 SP - D19 EP - D24 PB - Göller CY - Baden-Baden AN - OPUS4-28013 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Berger, Georg A1 - Ploska, Ute A1 - Gross, U. A1 - Mesgarian, M. A1 - Müller-Mai, Ch. A1 - Voigt, C. T1 - Tissue response in the femur of rabbits after implantation of a new calcium titanium phosphate composition KW - Bone Bonding KW - Calcium Titanium Phosphate KW - Coated Implants KW - Tissue Response PY - 2001 SN - 1013-9826 VL - 192-195 SP - 383 EP - 386 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-1044 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Ralph-Peter A1 - Schöch, M. A1 - Müller, G. A1 - Hahne, D.-B. T1 - Strukturuntersuchungen an Makromonomeren für partiell kristalline polymere Netzwerke T2 - Vortragstagung "Funktionspolymere für Systemlösungen" CY - Darmstadt, Germany DA - 2002-03-18 PY - 2002 AN - OPUS4-1806 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Streicher, Doreen A1 - Kroggel, O. A1 - Schickert, M. A1 - Müller, W. T1 - Ultraschallecho an Beton - Definition von Kenngrößen zur Beurteilung der Leistungsfähigkeit von bildgebenden Verfahren N2 - Zusammenfassung Durch die Entwicklung verschiedener Longitudinal- und Transversalwellenprüfköpfe, der variierenden Prüfkopfanordnung und -anzahl in Arrays sowie der verwendeten Erregerfrequenzen stehen derzeit mehrere Ultraschall-Verfahren für Untersuchungen an Betonbauteilen im Echobetrieb zur Verfügung. Darüber hinaus können verschiedene Verfahren für die Auswertung der Messergebnisse, u. a. SAFT-Rekonstruktionsberech-nungen (Synthetic Aperture Focusing Technique), genutzt werden. Um die Leistungsfähigkeit der Verfahren spezifizieren und auch vergleichen zu können, sind geeignete Kenngrößen erforderlich. Zu diesem Zweck wurden vorerst drei Kenngröße - das Signal/Rausch-Verhältnis s, die Laterale Auflösung D x und die Gleichmäßigkeit der Abbildung g - definiert und auf Untersuchungsergebnisse zu einem bekannten Prüfobjekt angewendet. Dabei handelt es sich um eine Bohrung in einem Betontestkörper aus Normalbeton B 35, die parallel zur Messfläche eingebracht wurde. In diesem Beitrag werden die Definitionen und die am Beispiel der Bohrung ermittelten Kenngrößen vorgestellt. Es soll gezeigt werden, dass anhand der vorgestellten Definitionen die Kenngrößen für jedes Verfahren prinzipiell ermittelt werden können. Eine Beurteilung der Werte kann derzeit noch nicht erfolgen. Dazu müssen sich Untersuchungen an weiteren bekannten Objekten anschließen, u. a. auch an gezielt konzipierten Testkörpern, an denen die Einflüsse ausgewählter Objekteigenschaften auf die verfahrensabhängigen Kenngrößen untersucht werden sollen. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p31/p31.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1979 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Busch, R. A1 - Tielemann, Christopher A1 - Reinsch, Stefan A1 - Müller, Ralf A1 - Patzig, C. A1 - Krause, M. A1 - Höche, T. T1 - Sample preparation for analytical scanning electron microscopy using initial notch sectioning N2 - A novel method for broad ion beam based sample sectioning using the concept of initial notches is presented. An adapted sample geometry is utilized in order to create terraces with a well-define d step in erosion depth from the surface. The method consists of milling a notch into the surface, followed by glancing-angle ion beam erosion, which leads to preferential erosion at the notch due to increased local surface elevation. The process of terrace formation can be utilized in sample preparation for analytical scanning electron microscopy in order to get efficient access to the depth-dependent microstructure of a material. It is demonstrated that the method can be applied to both conducting and non-conducting specimens. Furthermore, experimental parameters influencing the preparation success are determined. Finally, as a proof-of-concept, an electron backscatter diffraction study on a surface crystallized diopside glass ceramic is performed, where the method is used to analyze orientation dependent crystal growth phenomena occurring during growth of surface crystals into the bulk. KW - 3D etching KW - Ion beam erosion Sectioning KW - EBSD KW - Sample preparation KW - Analytical scanning electron microscopy KW - SEM KW - Glass Ceramic KW - Glass KW - Diopsid PY - 2021 DO - https://doi.org/10.1016/j.micron.2021.103090 SN - 0968-4328 VL - 150 PB - Elsevier B.V. AN - OPUS4-53075 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -