TY - JOUR A1 - Schönhals, Andreas A1 - Schick, C. A1 - Huth, H. A1 - Frick, B. A1 - Mayorova, M. A1 - Zorn, R. T1 - Molecular dynamics in glass-forming poly(phenyl methyl siloxane) as investigated by broadband thermal, dielectric and neutron spectroscopy KW - Neutron diffraction/scattering KW - Dielectric properties KW - Relaxation KW - Electric modulus KW - Glass transition PY - 2007 SN - 0022-3093 VL - 353 IS - 41-43 SP - 3853 EP - 3861 PB - North-Holland Publ. Co. CY - Amsterdam AN - OPUS4-15898 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brás, A. R. A1 - Dionísio, M. A1 - Huth, H. A1 - Schick, C. A1 - Schönhals, Andreas T1 - Origin of glassy dynamics in a liquid crystal studied by broadband dielectric and specific heat spectroscopy N2 - A combination of broadband dielectric (10-2 Hz–109 Hz) and specific heat (10-3 Hz–2×103 Hz) spectroscopy is employed to study the molecular dynamics of the glass-forming nematic liquid crystal E7 in a wide temperature range. In the region of the nematic phase the dielectric spectra show two relaxation processes which are expected theoretically: The δ relaxation which corresponds to rotational fluctuations of the molecules around its short axis and the tumbling mode at higher frequencies than the former one. For both processes the temperature dependence of the relaxation rates follows the Vogel-Fulcher-Tammann formula which is characteristic for glassy dynamics. By applying a detailed data analysis, it is shown that close to the glass transition the tumbling mode has a much steeper temperature dependence than the δ process. The former has a Vogel temperature which is by 30 K higher than that of the δ relaxation. Specific heat spectroscopy gives one relaxation process in its temperature and frequency dependence which has to be assigned to the α relaxation (dynamic glass transition). The unique and detailed comparison of the temperature dependence of the dielectric and the thermal relaxation rates delivers unambiguously that the dielectric tumbling mode has to be related to the dynamic glass transition. PY - 2007 DO - https://doi.org/10.1103/PhysRevE.75.061708 SN - 1539-3755 SN - 1063-651X VL - 75 IS - 6 SP - 061708-1-061708-8 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-15041 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schönhals, Andreas A1 - Schick, C. A1 - Huth, H. A1 - Frick, B. A1 - Mayorova, M. A1 - Zorn, R. T1 - Molecular Mobility of Poly(phenyl methyl siloxane) Investigated by Thermal, Dielectric and Neutron Spectroscopy PY - 2007 SN - 0743-0515 VL - 97 SP - 948 EP - 949 PB - Division of Polymeric Materials Science and Engineering, American Chemical Society CY - Washington, DC AN - OPUS4-15736 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph A1 - Alte-Teigeler, R. A1 - Bergmann, F.-J. A1 - Gebhards, G. A1 - Grabe, W. A1 - Guse, J. A1 - Hartel, S. A1 - Huth, P. A1 - Jannicke, B. A1 - Lobach, T. A1 - Schneider, T. A1 - Sondermann, E. A1 - Vengels, D. A1 - Voß, M. A1 - Willand, E. ED - Roßbach, W. T1 - Zusätzliche Technische Vertragsbedingungen und Richtlinien für Fugen in Verkehrsflächen ZTV Fug-StB 15 N2 - Unter Berücksichtigung praktischer und wissenschaftlich-technischer Erkenntnisse der letzten 15 Jahre - insbesondere auch auf der Basis verschiedener BAM-Forschungsergebnisse und Zulassungsverfahren - erfolgte eine Überarbeitung der Grundlagen, Bauprinzipien, Ausführungs- und Einbaukriterien sowie der Zulassungs- und Gütesicherungsmaßnahmen für insgesamt 4 Bauarten von Fugenfüllsystemen für hochbeanspruchte Verkehrsflächen. In diesem - für den Bundesfernstraßenbereich verbindlichen bautechnischen Regelwerk - finden insbesondere auch die Ergebnisse mehrerer wissenschaftlicher Vorhaben der BAM bezüglich labortechnischer Untersuchungen und Felduntersuchungen zum Funktionsverhalten und zur Dauerhaftigkeit erste baurechtliche Konsequenzen. Auf der Basis von Untersuchungen u.a. im Brückenbau wurden Regelungen für die Fugenausbildung in Asphalt und bei Befestigungskombinationen erarbeitet und umgesetzt. Damit konnten umfassende Regelungen für die maßgebenden Fahrbahnbeläge im Bundesfernstraßenbereich der Straßenbauverwaltung und ausführenden Industrieunternehmungen zur Verfügung gestellt werden. Die Neufassung dieser Regelungen dient darüber hinaus dem Ziel, den von der BAM vertretenen Wechsel hin zu einer performance-bezogenen Bewertungsmethodik, vorzubereiten. KW - Baustoffe KW - Fugen KW - Betonstraßen PY - 2015 SN - 978-3-86446-162-0 SP - 1 EP - 50 PB - FGSV Verlag GmbH CY - Köln AN - OPUS4-37220 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph A1 - Alte-Teigeler, R. A1 - Bergmann, F.-J. A1 - Gebhards, G. A1 - Grabe, W. A1 - Guse, J. A1 - Hartel, S. A1 - Huth, P. A1 - Jannicke, B. A1 - Lobach, T. A1 - Schneider, T. A1 - Sondermann, E. A1 - Vengels, D. A1 - Voß, M. A1 - Willand, E. ED - Roßbach, W. T1 - Technische Lieferbedingungen für Fugenfüllstoffe in Verkehrsflächen TL Fug-StB 15 N2 - Nach mehr als 15-jähriger Anwendung und mit der zwischenzeitlichen Einführung europäisch harmonisierter Normen für Fugenmaterialien war eine Anpassung Qualitäts- und Gütesicherungsanforderungen für Fugenfüllungen im Bundesfernstraßenbereich erforderlich. Hierbei ging es insbesondere darum, Maßnahmen und Verfahren zu entwickeln, um das nationale Qualitäts- und Gütesicherungsniveau weiter zu entwickeln und weiterhin sicher stellen zu können. Nach den Untersuchungserfahrungen im Labor und im Feld ging darum, neuartige Material- und Stoffkombinationen qualitätssicher dem Bauprozess zur Verfügung stellen zu können. Erforderliche Anforderungskriterien und zulässige Toleranzen der Lieferqualität wurden neu gefasst. Es wurde ein Verfahren entwickelt, europäische Bauprodukte qualitätsgesichert in den Bauprozess im Bundesfernstraßenbericht zu überführen. KW - Baustoffe KW - Fugenfüllsysteme KW - Anforderungs- und Leistungsrichtlinien PY - 2015 SN - 978-3-86446-163-7 SP - 1 EP - 39 PB - FGSV Verlag GmbH CY - Köln AN - OPUS4-37221 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Poppenberg, J. A1 - Richter, S. A1 - Traulsen, Ch. H.-H. A1 - Darlatt, Erik A1 - Baytekin, B. A1 - Heinrich, Thomas A1 - Deutinger, P. M. A1 - Huth, K. A1 - Unger, Wolfgang A1 - Schalley, Ch. T1 - Programmable multilayers of nanometer-sized macrocycles on solid support and stimuli-controlled on-surface pseudorotaxane formation N2 - Mechanically interlocked molecules (MIMs) such as rotaxanes and catenanes are capable of mechanical motion on the nanoscale and are therefore promising prototypes for molecular machines in recent nanotechnology. However, most of the existing examples are isotropically distributed in solution, which prohibits concerted movement and with it the generation of macroscopic effects. Thus, arranging them in ordered arrays is of huge interest in recent research. We report the deposition of quite densely packed multilayers of tetralactam macrocycles on gold surfaces by metal-coordinated layer-by-layer self-assembly. Linear dichroism effects in angle-resolved NEXAFS spectra indicate a preferential orientation of the macrocycles. The sequence of the metal ions can be programmed by the use of different transition metal ions at each deposition step. Additionally, reversible on-surface pseudorotaxane formation was successfully realized by repeated uptake and release of axle molecules inside the macrocycles cavities. KW - NEXAFS KW - XPS KW - Supramolecular Chemistry KW - Multilayers KW - Pyridine KW - UV/Vis KW - Macrocycles KW - Pseudorotaxanes PY - 2013 DO - https://doi.org/10.1039/c3sc50558h VL - 4 IS - 8 SP - 3131 EP - 3139 AN - OPUS4-42668 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Strüder, L. A1 - Hartmann, R. A1 - Holl, P. A1 - Ihle, S. A1 - Huth, M. A1 - Schmidt, J. A1 - Tham, Ch. A1 - Kanngießer, B. A1 - Baumann, J. A1 - Renno, A. A1 - Grenzer, J. A1 - Radtke, Martin A1 - Abboud, A. A1 - Pietsch, U. A1 - Soltau, H. T1 - High Speed, High Resolution imaging spectrometers based on pnCCDs for XRF and XRD applications N2 - For many years pnCCDs have been well known as X-ray detectors for spectroscopic imaging in many fields of science: X-Ray Fluorescence analysis (XRF), X-ray Diffraction (XRD) with light sources in large accelerator facilities as well as with laboratory light sources or with X-rays from celestial sources in X-ray astronomy. A brief introduction in GEXRF (Grazing Emission XRF) measurements with a laboratory laser produced plasma source will be given, PIXE (Particle Induced X-ray Emission) measurements and D2XRF (Double Dispersive X-Ray Fluorescence) and Slicing experiments with pnCCDs coupled to polycapillary optics performed at the BESSY synchrotron will be shown. Energy-dispersive Laue diffraction with ultra-hard X-rays for the analysis of defects in metals will conclude the overview of spectroscopic X-ray imaging measurements in the field of structure and dynamics of matter. KW - PnCCD KW - Synchrotron KW - XRF PY - 2016 DO - https://doi.org/10.1017/S1431927616001355 VL - 22 IS - S3 SP - 100 EP - 101 AN - OPUS4-38884 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Poppenberg, J. A1 - Richter, S. A1 - Traulsen, C.H.-H. A1 - Darlatt, Erik A1 - Baytekin, B. A1 - Heinrich, T. A1 - Deutinger, P.M. A1 - Huth, K. A1 - Unger, Wolfgang A1 - Schalley, C.A. T1 - Programmable multilayers of nanometer-sized macrocycles on solid support and stimuli-controlled on-surface pseudorotaxane formation N2 - Mechanically interlocked molecules (MIMs) such as rotaxanes and catenanes are capable of mechanical motion on the nanoscale and are therefore promising prototypes for molecular machines in recent nanotechnology. However, most of the existing examples are isotropically distributed in solution, which prohibits concerted movement and with it the generation of macroscopic effects. Thus, arranging them in ordered arrays is of huge interest in recent research. We report the deposition of quite densely packed multilayers of tetralactam macrocycles on gold surfaces by metal-coordinated layer-by-layer self-assembly. Linear dichroism effects in angle-resolved NEXAFS spectra indicate a preferential orientation of the macrocycles. The sequence of the metal ions can be programmed by the use of different transition metal ions at each deposition step. Additionally, reversible on-surface pseudorotaxane formation was successfully realized by repeated uptake and release of axle molecules inside the macrocycles cavities. KW - ISO KW - Standard KW - Surface analysis KW - Imaging PY - 2013 DO - https://doi.org/10.1039/c3sc50558h SN - 2041-6520 SN - 2041-6539 VL - 4 SP - 3131 EP - 3139 PB - RSC CY - Cambridge AN - OPUS4-29049 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -