TY - GEN A1 - Kalbe, Ute A1 - Müller, Werner A1 - Berger, Wolfgang T1 - Diffusion and sorption of organic contaminants in compacted soils T2 - 7th International FZK/TNO Conference on Contaminated Soil ; 7th ConSoil 2000 CY - Leipzig, Germany DA - 2000-09-18 PY - 2000 SN - 0-7277-2954-3 SP - 1 EP - 7 PB - Telford CY - London AN - OPUS4-755 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Eckardt, Jürgen A1 - Müller, Werner ED - Srodo´n, J. T1 - Transport of concentrated hydrocarbons within base liner systems T2 - 9th Conference of the European Clay Groups Association (Euroclay) CY - Krakow, Poland DA - 1999-09-04 KW - Hydrocarbon PY - 1999 SP - 1 CY - Kraków AN - OPUS4-750 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner A1 - Jakob, Ines ED - Cancelli, A. T1 - Comparison of oxidation stability of various geosynthetics T2 - 2nd European Geosynthetics Conference ; 2nd EuroGeo 2000 CY - Bologna, Italy DA - 2000-10-15 KW - Oxidation KW - Durability KW - Geomembrane KW - Geotextiles KW - Testing PY - 2000 SN - 88-555-2560-3 VL - 1 SP - 449 EP - 455 PB - Pàtron CY - Bologna AN - OPUS4-901 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Meng, Birgit A1 - Österle, Werner A1 - Gardei, André ED - Stark, J. T1 - Characterization of granulated blast furnace slag by means of the combined application of the FIB/TEM technique T2 - 16. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2006-09-20 PY - 2006 SN - 3-00-018263-2 VL - 1 SP - 1-0189 - 1-0195 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-13717 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Seeger, Stefan A1 - Müller, Werner T1 - Langzeitscherfestigkeit strukturierter Dichtungsbahnen N2 - In einem von der Firma GSE Lining Technology GmbH geförderten F+E-Vorhaben wurde die Langzeitscherfestigkeit und die Oxidationsstabilität von deren strukturierten PE-HD- Dichtungsbahnen untersucht. Bei diesen strukturierten Dichtungsbahnen wird das Strukturmaterial in einem eigenen Arbeitsgang aufgebracht. Das PE-HD-Material der Grundbahn war in allen Fällen Vestolen A 3512 R. Für das Strukturmaterial wurden die PE- LLD-Werkstoffe Ladene 118 N mit zwei Rußbatches (Proben 229/1 und 229/2) und Dowlex 2045 E mit zwei Rußbatches (Proben 229/3 und 229/4) verwendet. Die Langzeitscherfestigkeit wurde in Zeitstand-Scherversuchen in Wasser bei 80 °C getestet und dabei auch die Veränderung der OIT Werte von Grundbahn und Strukturmaterial gemessen. Die Oxidationsstabilität des Strukturmaterials im Vergleich zur Grundbahn wurde in Autoklavenversuchen an Proben im Wasserbad unter einem Sauerstoffdruck von 20 bar und 80°C geprüft. Nach der Immersion wurde die Veränderung der Reibungsparameter in Scherkastenversuchen ermittelt. T3 - BAM Forschungsberichtreihe - 256 PY - 2001 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1955 SN - 978-3-89701-736-9 SN - 0938-5533 VL - 256 SP - 1 EP - 34 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-195 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Müller, Werner T1 - Mineralogische und chemisch-physikalische Auswirkungen der Permeation von Kohlenwasserstoffen in Kombinationsdichtungen und -dichtwänden N2 - Zur Sicherung von Deponien und Altlasten mit dem Ziel eines langfristig wirksamen Grundwasserschutzes werden seit Mitte der 80er Jahre Kombinationsdichtungen (Verbund aus Kunststoffdichtungsbahn und mineralischen Dichtschichten) eingesetzt. Um deren Langzeitbeständigkeit auch unter extremen Bedingungen bewerten zu können, wurden Permeationsmesszellen, welche die Verhältnisse in der Deponie nachstellen und über einen Zeitraum von 12 Jahren mit einem Mehrkomponentengemisch konzentrierter organischer Verbindungen beaufschlagt worden waren, zerlegt und die Auswirkungen der Schadstoffpermeation auf die Abdichtungsmaterialien untersucht. Schwerpunkte der hier vorgestellten Arbeiten waren Untersuchungen: - zur Auswirkung der Permeation des Gemisches an organischen Verbindungen auf die Eigenschaften der Kunststoffdichtungsbahn, - zur vertikalen Verteilung der organischen Verbindungen in den mineralischen Dichtungen, - zu Veränderungen mineralogischer, mikromorphologischer und bodenmechanischer Eigenschaften der mineralischen Dichtungsmaterialien, - zu mikrobiellen Aktivitäten in den mineralischen Dichtungen. Daneben wurden Stofftransportparameter bestimmt und eine Modellierung des Stofftransportes durchgeführt. Die verschiedenen untersuchten Materialien der Kombinationsdichtungen erwiesen sich unter den extremen Bedingungen als ein stabiles und effizientes Abdichtungssystem. T3 - BAM Forschungsberichtreihe - 251 PY - 2002 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1991 SN - 978-3-89701-731-8 SN - 0938-5533 VL - 251 SP - 1 EP - 198 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-199 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeger, Stefan A1 - Böhm, Hans A1 - Söhring, Guido A1 - Müller, Werner ED - Cancelli, A. T1 - Long term testing of geomembranes and geotextiles under shear stress T2 - 2nd European Geosynthetics Conference ; 2nd EuroGeo 2000 CY - Bologna, Italy DA - 2000-10-15 KW - Geomembranes KW - Geotextiles PY - 2000 SN - 88-555-2560-3 VL - 2 SP - 607 EP - 612 PB - Pàtron CY - Bologna AN - OPUS4-854 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Müller, Werner T1 - Standard and alternative landfill capping design in Germany N2 - Engineered capping systems are in most cases an indispensable and often the only efficient component required by the long-term safety concept for landfills, mine tailings tips and contaminated land. In Germany the composite liner is the main component of standard landfill cappings for municipal and hazardous waste landfills and the compacted clay liner (CCL) for landfills for inert or low-contamination waste. The composite liner is a technically highly effective but very expensive system. Research and experience has given rise to concern about the proper long-term performance of a conventional single CCL as a landfill capping. Therefore, alternative capping systems are discussed and applied for landfills and for the containment of contaminated sites. This paper gives an overview on various alternative engineered cappings and suitable systems for capping reflecting the state of the art and the expert view in Germany. According to the European Council Directive on the landfill of waste an impermeable mineral layer is recommended for the surface sealing of non-hazardous landfills and a composition of artificial sealing liner and impermeable mineral layer for hazardous landfills. In both cases a drainage layer thickness of at least 0.5 m is suggested. These recommendations should be interpreted flexibly and to some extent modified in the light of the experience and results presented in this paper. KW - Landfills KW - Capping system KW - Durability KW - Permeability PY - 2004 DO - https://doi.org/10.1016/j.envsci.2004.04.002 SN - 1462-9011 VL - 7 IS - 4 SP - 277 EP - 290 PB - Elsevier Science CY - Exeter AN - OPUS4-3742 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kalbe, Ute A1 - Müller, Werner A1 - Berger, Wolfgang A1 - Tatzky-Gerth, Renate A1 - Eckardt, Jürgen ED - Sarsby, R. T1 - Transport of organic pollutants in composite liners T2 - 3rd International Symposium on Geotechnics Related to the European Environment ; 3rd GREEN CY - Berlin, Germany DA - 2000-06-21 KW - Composite liner KW - Contaminant transport modelling PY - 2001 SN - 0-7277-3004-5 SP - 141 EP - 147 PB - Telford CY - London AN - OPUS4-1349 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Söhring, Guido T1 - Leserbrief zu dem Aufsatz "Sicherung der Deponie Grube Präsident, Nordhalde, 2. Bauabschnitt" im Heft 1/13 der Zeitschrift Müll und Abfall KW - Deponie KW - Verlegefachbetrieb KW - Qualitätssicherung PY - 2013 SN - 0027-2957 SN - 1863-9763 VL - 45 IS - 5 SP - 265 PB - Erich Schmidt CY - Berlin AN - OPUS4-28828 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Prüfung und Bemessung von Kunststoff-Dränmatten T2 - 17. Fachtagung: Die sichere Deponie, Sicherung von Deponien und Altlasten mit Kunststoffen CY - Würzburg, Germany DA - 2002-02-14 PY - 2002 AN - OPUS4-6058 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Seeger, Stefan A1 - Müller, Werner T1 - Requirements and Testing of Protective Layer Systems for Geomembranes N2 - Geomembranes used in basal liner systems of landfills must not be damaged by the coarse gravel of the standard drainage layer. Therefore, the geomembrane must be protected against mechanical damage and strain by means of a suitable protective layer. The main requirements for this protective layer as well as the long-term durability of the mineral and geotextile components are compiled in the guideline recently released by German authorities. An overview is given on the existing types of protective layer systems with the state-of-the-art testing, the requirements and selected results of related research programs. PY - 1996 SN - 0266-1144 VL - 14 IS - 7-8 SP - 365 EP - 376 PB - Elsevier CY - Amsterdam AN - OPUS4-7583 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeger, Stefan A1 - Müller, Werner T1 - Requirements and testing of protective layer systems for geomembranes T2 - 9th GRI Conference, Geosynthetics in Infrastructure - Enhancement and Remediation CY - Philadelphia, PA, USA DA - 1995-12-12 PY - 1995 SP - 175 EP - 184 CY - Philadelphia AN - OPUS4-7578 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner T1 - Hauptsache: schwarz und billig? Zur Eignung"alternativer" PE-HD-Dichtungsbahnen für endgültige Deponieoberflächenabdichtungen N2 - Mit PE-HD-Dichtungsbahnen kann eine sehr wirksame, endgültige Oberflächenabdichtung auf einer Deponie gebaut werden. Dies setzt zwei Dinge voraus: die Dichtungsbahnen müssen fehlerfrei eingebaut werden und sie müssen lange genug halten. Die Lebensdauern von PE-HD-Dichtungsbahnen können sich jedoch je nach Werkstoff, Verarbeitung und Installation um Größenordnungen unterscheiden. Für die Auswahl sind daher spezielle Untersuchungen zur Alterung entscheidend und die Herstellungs-, Schweiß- und Verlegetechnik müssen bestimmte technische Standards erfüllen. KW - PE-HD-Dichtungsbahnen KW - Deponieabdichtung KW - BAM-Zulassung KW - DIBt-Zulassung für LAU-Anlagen KW - Deponieverordnung PY - 2005 UR - http://www.baufachinformation.de/zeitschriftenartikel.jsp?z=05089018006 SN - 0027-2957 SN - 1863-9763 VL - 8 SP - 392 EP - 397 PB - Erich Schmidt CY - Berlin AN - OPUS4-10867 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner T1 - Langzeit-Scherfestigkeit von mehrschichtigen Geokunststoffen T2 - 2. Symposium Umweltgeotechnik CY - Freiberg, Deutschland DA - 2005-09-29 KW - Scherfestigkeit KW - Zeitstand-Scherversuch KW - Geokunststoffe PY - 2005 SN - 1613-4753 SP - 75 EP - 95 PB - Kompetenz-Zentrum für Interdisziplinäres Flächenrecycling CY - Freiberg AN - OPUS4-11175 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner ED - Jost, D. T1 - Eignungsgutachten für Kunststoff-Dränelemente durch die BAM KW - Kunststoff-Dränelemente KW - Eignungsgutachten KW - Deponieoberflächenabdichtung PY - 2005 SP - 213 EP - 232 PB - SKZ CY - Würzburg AN - OPUS4-11159 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner ED - Herrmann, R. T1 - Eignungsnachweise bei Geokunststoffen für Dämme, Deiche und Stauanlagen T2 - 2. Symposium Sicherung von Dämmen, Deichen und Stauanlagen CY - Siegen, Deutschland DA - 2006-02-09 KW - Geokunststoffe KW - Wasserbau KW - Deiche PY - 2006 VL - 2 SP - 435 EP - 440 PB - IfG CY - Siegen AN - OPUS4-14445 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Albers, K. A1 - Müller, Werner ED - Ramke, Hans-Günter ED - Witt, Karl-Josef ED - Bräcker, Wolfgang ED - Tiedt, Michael T1 - Kunststoffdichtungsbahnen als Abdichtungselement in Oberflächenabdichtungssystemen T2 - Status-Workshop "Anforderungen an Deponie-Oberflächenabdichtungssysteme" CY - Höxter, Deutschland DA - 2006-11-30 KW - Kunststoffdichtungsbahnen KW - Deponien KW - Zulassungen PY - 2007 SN - 3-9807985-5-0 VL - 06 SP - 65 EP - 85 CY - Höxter AN - OPUS4-16079 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Funktionsdauer von Dränmatten als Entwässerungselemente in Oberflächenabdichtungen von Deponien und Altlasten, Erkenntnissen aus den Begutachtungen der BAM T2 - 23. Fachtagung "Die sichere Deponie", Sicherheit von Deponien und Altlasten mit Kunststoffen CY - Würzburg, Germany DA - 2007-02-01 PY - 2007 AN - OPUS4-15964 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Langzeit-Scherfestigkeit von Bentonitmatten und Kunststoff-Dränelemente T2 - IV. Geokunststoff-Kolloquium der Naue Unternehmensgruppe CY - Garmisch-Partenkirchen, Germany DA - 2005-01-27 PY - 2005 AN - OPUS4-15966 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Kunststoffdichtungsbahnen als Abdichtungselement in Oberflächenabdichtungen T2 - Status-Workshop, Anforderungen an Oberflächenabdichtungen CY - Höxter, Germany DA - 2006-11-30 PY - 2006 AN - OPUS4-15965 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hsuan, Y.G. A1 - Schröder, Hartmut A1 - Rowe, K. A1 - Müller, Werner A1 - Greenwood, J. A1 - Cazzuffi, D. A1 - Koerner, R.M. ED - Neil Dixon, T1 - Long-term performance and lifetime prediction of geosynthetics N2 - To properly understand and assess the long-term behaviour of geosynthetic materials it is necessary to investigate the various types of possible degradation mechanims. This includes both chemical and mechanical behaviour, and sometimes even their interactions with one another. Clearly, chemical degradation of geosynthetics depends on the polymer type. For example, polyolefins are vulnerable to oxidation; polyesters are susceptible to hydrolysis; and plasticizers can leach from polyvinyl chloride. This paper describes the concept of these three types of degradation, but focuses on the oxidation of polyolefins since the majority of the geosynthetics is made from this type of polymer. The methods used to predict the lifetime of antioxidants and service life of the geosynthetic material will be illustrated. Furthermore, the influence of temperature, pressure, and ultraviolet light on the service life are also demonstrated. Finally, the current specifications targeting the longevity of different geosynthetics are presented. Regarding mechanical degradation, the paper mainly focuses upon the creep deformation of geogrids and stress crack resistance (SCR) of polyethylene geomembranes and geopipe. The method to assess stress crack resistance is described, and the microscopic mechanisms that lead to such failure are explained. For creep evaluation, different acceleration tests are presented and their applicability with respect to the different types of polymers is illustrated. In addition, the long-term shear behaviour of geocomposites and geosynthetic clay liners is presented. T2 - 4th European Geosynthetics Conference - EuroGeo4 CY - Edinburgh, Scotland, UK DA - 2008-09-07 KW - Geosynthetic KW - Durability KW - Degradation KW - Antioxidant KW - Weathering PY - 2008 SP - 1 EP - 41 AN - OPUS4-17975 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Jakob, Ines A1 - Tatzky-Gerth, Renate T1 - Long-term water flow capacity of geosynthetic drains and structural stability of their drain cores KW - Geosynthetics KW - Drain elements KW - Long-term behavior KW - Water flow capacity KW - Creep behavior PY - 2008 SN - 1072-6349 VL - 15 IS - 6 SP - 437 EP - 451 PB - Telford CY - London, UK AN - OPUS4-18630 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Jakob, Ines A1 - Li, C.S. A1 - Tatzky-Gerth, Renate T1 - Durability of polyolefin geosynthetic drains N2 - The German Federal Institute for Materials Research and Testing (BAM) has established a testing guideline to assess the suitability of geosynthetic or geocomposite drain (GCD) elements for final landfill cover systems. In an earlier paper the uniform procedure according to the BAM guideline for determining long-term water flow capacity was described, and the structural stability of drain cores under creep was investigated. The extrapolation of creep curves is permissible only when it can be shown, over the extrapolated period (at least 100 years), that oxidative aging does not invoke any relevant changes in the polyolefin material. This can be shown by measuring antioxidant depletion and mechanical degradation of the drain cores and filter/protection geotextiles in oven aging and water immersion tests. In this paper the results of such aging studies on three different GCD products are reported. Degradation of the tensile strength of HALS-stabilized polypropylene needle-punched nonwoven geotextiles (PP NWGTs) starts right from the beginning of the oven aging. This has to be taken into account for lifetime predictions based on residual tensile strength. The rate of oxidative degradation of NWGTs decreases significantly with increasing mass per area. Therefore the expected service life sets a limit on acceptable geotextile grammage. Antioxidant depletion in the drain cores, which are made of relatively thick PP strands or HDPE ribs, is about an order of magnitude slower than in filter and protection NWGTs, which are made of thin fibers. Service life values in excess of 100 years may be obtained for the products when the geotextiles and drain cores are properly stabilized and designed. KW - Geosynthetics KW - Geosynthetic drain elements KW - Long-term behavior KW - Oxidative degradation PY - 2009 DO - https://doi.org/10.1680/gein.2009.16.1.28 SN - 1072-6349 VL - 16 IS - 1 SP - 28 EP - 42 PB - Telford CY - London, UK AN - OPUS4-18999 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Dichtungsbahnen zur Abdichtung von Deponien und Altlasten T2 - 25. Fachtagung - Die sichere Deponie - Sicherung von Deponien und Altlasten mit Kunststoffen CY - Würzburg, Deutschland DA - 2009-02-26 KW - Kunststoffdichtungsbahnen KW - Deponien KW - Altlasten PY - 2009 IS - Abschnitt C SP - 1 EP - 22 CY - Würzburg AN - OPUS4-19064 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pretsch, Thorsten A1 - Müller, Werner T1 - Shape memory poly(ester urethane) with improved hydrolytic stability N2 - In two hydrolytic degradation studies the tensile (mechanical) and functional (thermo-mechanical) properties of a hydrolysis-stabilized shape memory poly(ester urethane) and its non-stabilized analog were investigated. Hydrolytic degradation was enforced by specimen immersion in de-ionized water at 80 °C. Significant differences in the fundamental shape memory parameters were monitored as function of aging time for the stabilized and non-stabilized polymer. This included the ability to recover strain (shape recoverability) and stress (stress recoverability) on heating after shape programming. Hydrolysis-related mechanical and functional changes were correlated with morphological ones, detected by differential scanning calorimetry (DSC). The shape memory poly(ester urethane), which was protected by a carbodiimide-based hydrolysis stabilizer, revealed significantly improved resistance towards hydrolysis with respect to various mechanical and shape memory parameters. KW - Shape memory polymers KW - Hydrolytic degradation KW - Stabilization KW - Thermo-mechanical properties KW - Poly(ester urethane) KW - Active polymers PY - 2010 DO - https://doi.org/10.1016/j.polymdegradstab.2009.12.020 SN - 0141-3910 SN - 1873-2321 VL - 95 IS - 5 SP - 880 EP - 888 PB - Applied Science Publ. CY - London AN - OPUS4-21270 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Die Zulassung von Geokunststoffen, Polymeren und Dichtungskontrollsystemen nach der neuen Deponieverordnung T2 - 26. Fachtagung "Die sichere Deponie" CY - Würzburg, Germany DA - 2010-02-18 PY - 2010 AN - OPUS4-20995 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Pretsch, Thorsten T1 - Hydrolytic aging of crystallizable shape memory poly(ester urethane): Effects on the thermo-mechanical properties and visco-elastic modeling N2 - The shape memory functionality of a segmented poly(ester urethane) and its hydrolytically aged specimens has been studied by cyclic thermo-mechanical measurements with an imposed strain of 100%. The shape memory effect was triggered by a melting transition in the soft segment phase. Aging was enforced by immersion in hot de-ionized water. In the course of the immersion the tensile properties (secant moduli, stress and strain at yield and break) were impaired by hydrolysis. Advanced specimen embrittlement finally led to rupture during the first thermo-mechanical cycle. This happened after 68 days of aging at 55 °C and correspondingly after 8 days at 80 °C. The residual strain after the first cycle, which was about 25%, increased significantly with aging time. Therefore, the total strain recoverability became ever smaller: aged specimens needed conditioning by at least two cycles for a full development of shape recoverability. Likewise the recovery force decreased continuously. Despite these degradation effects, it was observed that the shape fixity and the cycle-related shape recovery of appropriately conditioned specimens (number of cycles N > 2) remained on a constant high level (at round 100% and between 90% and 100%, respectively) throughout the whole aging period. These observations are discussed within the framework of a simplified model of the behavior of crystallizable shape memory polymers. The amorphous state of the polymer is described by the equation of the linear visco-elastic solid. As for the semi-crystalline state the material is assumed to react elastically with respect to deviations from the configuration, which was frozen up under constraint conditions. The curves of the dependence of the material behavior on aging time at 55 °C match perfectly those at 80 °C when the time axis is adjusted by a factor of 8.5, from which the apparent activation energy for hydrolytic aging in the amorphous state of 82 kJ mol-1 could be deduced. KW - Shape memory polymers KW - Hydrolytic degradation KW - Thermo-mechanical properties KW - Poly(ester urethane) KW - Active polymers PY - 2010 DO - https://doi.org/10.1016/j.eurpolymj.2010.05.004 SN - 0014-3057 SN - 1873-1945 VL - 46 IS - 8 SP - 1745 EP - 1758 PB - Elsevier CY - Oxford AN - OPUS4-21819 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalbe, Ute A1 - Müller, Werner A1 - Berger, Wolfgang A1 - Eckardt, Jürgen T1 - Transport of organic contaminants within composite liner systems N2 - Composite liners (a geomembrane in intimate contact with a mineral liner) are frequently used to line landfills and contaminated sites. It is therefore very important to characterise the behaviour of these systems even under extreme conditions. An investigation was undertaken to determine the influence of a mixture of concentrated organic contaminants on composite liner materials taken from test cells that had been dismantled after a 12-year permeation test. The organic hydrocarbons had permeated the HDPE-geomembrane and had then migrated or had been adsorbed within the mineral liners, depending on their properties. The obtained concentration profiles of the contaminant mixture components indicate that the various mineral layer materials have selective retardation abilities which correspond to the different parameters of the organic compounds as well as of the mineral layer. In addition, contaminant transport in the composite liners tested was modelled and the results of the model analysis compared with measurement data. An example (acetone) illustrates the calculated spatial and temporal contaminant concentration. The composite liners investigated exhibit a very good sealing capacity against the concentrated organic contaminants used. KW - Composite liner system KW - Transport modelling KW - Contaminants PY - 2002 DO - https://doi.org/10.1016/S0169-1317(01)00093-X SN - 0169-1317 SN - 1872-9053 VL - 21 IS - 1-2 SP - 67 EP - 76 PB - Elsevier CY - Amsterdam AN - OPUS4-1353 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thies, Martina A1 - Gerloff, Constantin A1 - Müller, Werner A1 - Seeger, Stefan ED - Koerner, R. ED - Gartung, E. ED - Zanzinger, H. T1 - Long-term shear testing of geosynthetic clay liners T2 - International Symposium [on Clay Geosynthetic Barriers] IS CY - Nuremberg, Germany DA - 2002-04-16 PY - 2002 SN - 90-5809-380-8 SP - 97 EP - 104 PB - Balkema CY - Lisse AN - OPUS4-1362 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Eckardt, Jürgen A1 - Müller, Werner ED - Srodo´n, J. T1 - Transport of concentrated organic compounds within base liner systems T2 - 9th Conference of the European Clay Groups Association (Euroclay) CY - Krakow, Poland DA - 1999-09-04 KW - Composite liner KW - Organic contaminants KW - Contaminant transport PY - 1999 SP - 97 CY - Kraków AN - OPUS4-1344 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Seeger, Stefan A1 - Müller, Werner A1 - Mohr, Kerstin ED - Delmas, P. T1 - Long term tensile testing of polyolefin fibers in geotextiles T2 - 7th International Conference on Geosynthetics (ICG) CY - Nice, France DA - 2002-09-22 PY - 2002 SN - 90-5809-529-0 VL - 4 SP - 1459 EP - 1462 PB - Balkema CY - Lisse AN - OPUS4-1532 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaber, Martin A1 - Müller, Ralf A1 - Brzezinka, Klaus-Werner A1 - Peuker, Christel A1 - Langer, A. T1 - Analyse von Wasserstoff in Quarzglas T2 - 76. Glastechnische Tagung CY - Bad Soden, Deutschland DA - 2002-05-27 PY - 2002 SP - 242 EP - 245 PB - DGG, Deutsche Glastechnische Gesellschaft e.V. CY - Frankfurt/M. AN - OPUS4-1636 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Seeger, Stefan T1 - Requirements for Leak Monitoring Systems for HDPE Geomembrane Landfill Liners KW - Electric leak monitoring system KW - Landfill lining KW - HDPE geomembrane KW - Leaks and holes PY - 2002 DO - https://doi.org/10.2462/09670513.610 SN - 0967-0513 VL - 10 IS - 2 SP - 91 EP - 99 PB - EPP Publ. CY - Richmond AN - OPUS4-1473 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner T1 - Kunststoff-Dränmatten im Deponiebau, Teil 2: Zur Bemessung PY - 2002 SN - 0005-6820 SN - 1437-0999 SN - 0341-1052 SN - 0932-6359 SN - 0932-8351 VL - 79 IS - 4 SP - 232 EP - 242 PB - Ernst CY - Berlin AN - OPUS4-1359 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Büttgenbach, Beate A1 - Jakob, Ines A1 - Mann, Heidemarie T1 - Comparison of the oxidative resistance of various polyolefin geotextiles N2 - Data are reported from oven aging in circulating air and water immersion tests at 80°C on various polyolefin (polyethylene (PE) and polypropylene (PP)) needle-punched nonwoven geotextiles (GTnws) and the results of these long-term tests are compared with the oxidative resistance of high-density PE geomembranes (HDPE GMs) described in a preceding paper (Polym. Degr. Stability 79(1) (2003) 161). Polyolefin fibers used in geotextiles are typically less stabilized, have a very high surface-to-volume ratio and an oriented morphology compared with HDPE GMs. Therefore, significant differences in the oxidation behavior of these products are expected which may affect their durability. Two general results can be obtained from our measurements: Firstly, while the lifetime of the HDPE GM is essentially determined by the slow loss of stabilizers, for all GTnws a rapid reduction in the oxidative induction time (OIT) and, as we conclude, in the amount of stabilizer was observed during water immersion and air aging. Secondly, the mechanical property degradation of the GTnws depended strongly on the oxidation conditions: the induction period prior to the degradation was much longer for immersion in water than for oven aging in circulating air. After antioxidant depletion, an induction time of the oxidation reaction, which depends on the draw ratio of the stretched fibers and the oxygen supply, might substantially contribute to the induction period of the mechanical property degradation of GTnws. For one PP GTnw product, a sudden reduction in the mechanical strength occurred after onset of degradation which continued rapidly until complete deterioration. For other PP samples as well as for all PE GTnws the reduction in mechanical strength proceeded slowly. Best fits were obtained by modeling the degradation process of the PE GTnws by a second-order kinetic. Using an activation energy of 60 kJ/mol (Geotextiles, Geomembranes and Related Products, Balkema, Rotterdam, 1990; Conference Proceedings of the Sixth International Conference on Geosynthetics, Industrial Fabrics Association International (IFAI), Atlanta, USA, 1998, pp. 683–690; Clay Geosynthetic Barriers, Balkema, Lisse, The Netherlands, 2002, pp. 87–96), lower limits of the half-live of the degradation at worst case field conditions were obtained in the range 30–83 years. Some decades have to be added for the overall induction time. However, under field conditions with limited oxygen supply, the expected service lifetime might be at least half an order of magnitude longer. KW - Durability KW - Geotextile KW - Oxidative resistance KW - Test methods KW - Long-term testing PY - 2003 DO - https://doi.org/10.1016/S0266-1144(03)00032-3 SN - 0266-1144 VL - 21 SP - 289 EP - 315 PB - Elsevier CY - Amsterdam AN - OPUS4-2632 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner A1 - Seeger, Stefan A1 - Thies, Martina ED - Knipschild, F. W. T1 - Langzeit-Scherfestigkeit von Geokunststoffen aus mehreren Komponenten T2 - 19. Fachtagung "Die Sichere Deponie" CY - Würzburg, Deutschland DA - 2003-02-13 PY - 2003 IS - 19 SP - L1 EP - L14 PB - SKZ CY - Würzburg AN - OPUS4-2806 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Müller, Werner ED - Christensen, T. T1 - Long term behaviour of composite liners under exposure to a mixture of concentrated hydrocarbons T2 - 7th International Waste Management and Landfill Symposium ; Sardinia 99 CY - S. Margherita di Pula, Cagliari, Italy DA - 1999-10-04 KW - Landfill KW - Composite liner KW - Organic contaminants KW - Contaminant transport PY - 1999 VL - 3 SP - 165 EP - 172 PB - CISA, Environmental Sanitary Engineering Centre CY - Cagliari AN - OPUS4-1343 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Prüfung und Bemessung von Kunststoff-Dränmatten T2 - 18. Fachtagung "Die Sichere Deponie" CY - Würzburg, Deutschland DA - 2002-02-14 PY - 2002 UR - http://www.deponie-stief.de/pdf/fachlit_pdf/2002skz_mueller.pdf IS - 18 SP - F1 EP - F13 PB - SKZ CY - Würzburg AN - OPUS4-1301 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner T1 - Kunststoff-Dränmatten im Deponiebau - Teil 1: Eigenschaften und Beurteilung PY - 2002 SN - 0005-6820 SN - 1437-0999 SN - 0341-1052 SN - 0932-6359 SN - 0932-8351 VL - 79 IS - 3 SP - 178 EP - 192 PB - Ernst CY - Berlin AN - OPUS4-1319 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Langzeit-Scherfestigkeit von Bentonitmatten und Kunststoff-Dränelementen T2 - 4. Geokunststoff-Kolloquium CY - Garmisch-Partenkirchen, Deutschland DA - 2005-01-27 KW - Geokunststoffe KW - Scherfestigkeit KW - Lebensdauer PY - 2005 SP - 1 EP - 22 CY - Espelkamp-Fiestel AN - OPUS4-15940 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Eignungsgutachten für Kunststoff-Dränelemente durch die BAM T2 - 21. Fachtagung "Die sichere Deponie" CY - Würzburg, Germany DA - 2005-11-09 PY - 2005 AN - OPUS4-15963 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Kunststofftechnische Fremdprüfung beim Bau von Abdichtungen für Deponien und Altlasten KW - Deponietechnik KW - Fremdprüfung KW - Geokunststoffe PY - 2008 IS - Abschnitt C SP - 1 EP - 18 CY - Würzburg AN - OPUS4-16716 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Kunststofftechnische Fremdprüfung beim Bau von Abdichtungen für Deponien und Altlasten T2 - 24. Fachtagung "Die sichere Deponie" CY - Würzburg, Germany DA - 2008-02-07 PY - 2008 AN - OPUS4-16717 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Jakob, Ines T1 - Oxidative resistance of high-density polyethylene geomembranes N2 - Data are reported from oven aging in air for more than 13 years (!) and from water immersion tests for 6 years at 80 °C on various high-density polyethylene geomembranes (GM) used in landfill lining. The mechanical properties and oxidative induction times (OIT) of the samples were monitored during the long-term testing. Aging behavior in hot air is different from that in hot water. During oven aging a slow, exponential decrease of OIT is observed. Even after 13.6 years there is no indication of an oxidative degradation of the mechanical properties. During immersion in water a strong reduction in OIT occurs within the first year, after which time the curve levels off. Oxidation starts when very low OIT-values are reached after about 5 years at which time the mechanical strength rapidly falls to values below the yield point. We conclude from these data that the service life of HDPE GM's is essentially determined by the slow loss of stabilizers due to migration. The oxidation starts only after the depletion of antioxidants and then quickly leads to brittleness of the sample. However, no complete oxidative deterioration has been observed to date. We estimate by the van't Hoff rule that under normal ambient conditions many centuries will have to pass before the functional mechanical properties of state-of-the-art stabilized HDPE bulk material will be reduced below acceptable limits by oxidative degradation. KW - Durability KW - HDPE geomembrane KW - Oxidation KW - Oxidative resistance testing PY - 2003 DO - https://doi.org/10.1016/S0141-3910(02)00269-0 SN - 0141-3910 SN - 1873-2321 VL - 79 IS - 1 SP - 161 EP - 172 PB - Applied Science Publ. CY - London AN - OPUS4-2134 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Langzeit-Scherfestigkeit von Bentonitmatten und Kunststoff-Dränmatten T2 - Fachtagung "Deponietechnik 2003 - Abschluss und Sicherung von Deponien in Sachsen-Anhalt" CY - Halle (Saale), Deutschland DA - 2003-05-22 PY - 2003 SP - C1 EP - C12 AN - OPUS4-2524 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Werner A1 - Seeger, Stefan A1 - Thies, Martina T1 - Langzeit-Scherfestigkeit von Geokunststoffen aus mehreren Komponenten T2 - 11. Braunschweiger Deponie- und Dichtwandseminar ; 11. Braunschweiger Deponieseminar CY - Braunschweig, Deutschland DA - 2004-03-11 KW - Scherfestigkeit KW - Beständigkeit KW - Geokunststoffe KW - Prüftechnik PY - 2004 UR - http://www.deponie-stief.de/pdf/fachlit_pdf/2004tubs_mueller_scherfestigkeit.pdf SN - 3-927610-65-8 IS - 74 SP - 213 EP - 231 PB - Inst. für Grundbau und Bodenmechanik, TU Braunschweig CY - Braunschweig AN - OPUS4-3361 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner T1 - Oberflächenabdichtungen aus PE-HD-Dichtungsbahnen für Altdeponien N2 - Bis Mitte 2005 müssen schätzungsweise 250 alte Hausmülldeponien geschlossen werden, die nicht dem Stand der Technik entsprechen. Danach muß irgendwann eine Sicherung erfolgen. Wo dies im Einzelfall kontrollierbar möglich ist, kann man versuchen, den Deponiekörper anaerob ausreagieren zu lassen oder aerob zu stabilisieren. An einer zusätzlichen technischen Barriere wird jedoch auch dann kaum ein Weg vorbeiführen. Einfache, aber hochwirksame technische Abdichtungen können auch auf der Oberfläche einer Deponie errichtet werden. Für die dort wirksamen Beanspruchungen sind Abdichtungen mit ausgewählten PE-HD-Dichtungsbahnen besonders geeignet. Eine Zulassung der Produkte für diesen Anwendungszweck ist erforderlich, da PE-HD-Werkstoffe, aber auch Dichtungsbahnen, die aus dem gleichen PE-HD-Werkstoff unterschiedlich gefertigt wurden, sich in ihren Eigenschaften drastisch unterscheiden können. KW - PE-HD-Dichtungsbahnen KW - Oberflächenabdichtungen KW - Altdeponien PY - 2004 DO - https://doi.org/10.1002/bate.200490170 SN - 0005-6820 SN - 1437-0999 SN - 0341-1052 SN - 0932-6359 SN - 0932-8351 VL - 81 IS - 9 SP - 699 EP - 709 PB - Ernst CY - Berlin AN - OPUS4-4398 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Langzeit-Scherfestigkeit von Geokunststoffen aus mehreren Komponenten T2 - 19. Fachtagugng: Die sichere Deponie, Sicherung von Deponien und Altlasten mit Kunststoffen CY - Würzburg, Germany DA - 2003-02-12 PY - 2003 AN - OPUS4-5442 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Langzeit->Scherfestigkeit von Betonitmatten und kunststoff-Dränmatten T2 - Deponietechnik 2003 CY - Halle (Saale), Germany DA - 2003-05-22 PY - 2003 AN - OPUS4-5443 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Werner T1 - Quo vadis Geokunststoffe? CE-Kennzeichnung und BAM-Zulassung N2 - Ober die europäischen Produktnormen für Geokunststoffe (hEN) wird gestritten: Dienen sie nur einem einheitlichen Verfahren der CE-Kennzeichnung oder werden darin alle relevanten geotechnischen Eigenschaften so verbindlich festgelegt, dass darüber hinausgehende nationale Vorschriften ungültig werden? Der Streit wurde durch ein Urteil des Europäischen Gerichtshofs weiter angefacht. Davon noch nicht betroffen ist der Deponiebau. Die Deponie ist ein besonderes Bauwerk, bei dem vor allem abfallrechtliche Regelungen beachtet werden müssen. In der deutschen Deponieverordnung wurde daher eine mit der Europäischen Kommission abgestimmte Gleichwertigkeitsklausel für CE-gekennzeichnete Bauprodukte verankert, die diese Besonderheit berücksichtigt. Wir zeigen, dass das in den hEN festgelegte Eigenschaftsspektrum der Bauprodukte im Wesentlichen nicht gleichwertig zu dem Spektrum ist, das sich aus den Anforderungen der Deponieverordnung ergibt. Die Qualitätssicherung der hEN, die nur eine zertifizierte werkseigene Produktionskontrolle jedoch keine Fremdüberwachung vorsieht, entspricht ebenfalls nicht den Anforderungen der Deponieverordnung. Eine CE-Kennzeichnung kann daher eine BAM-Zulassung nicht gleichwertig ersetzen. Auch für andere geotechnische Anwendungsgebiete gilt, dass die geltenden hEN die Geokunststoffe nicht ausreichend charakterisieren. Die Antwort auf die Frage, wie verbindlich diese mangelhaften hEN werden könnten, ist daher von weitreichender Bedeutung für die gesamte Geotechnik. T2 - 31. Fachtagung "Die sichere Deponie" CY - Würzburg, Deutschland DA - 03.02.2015 PY - 2015 AN - OPUS4-32603 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -