TY - CONF A1 - Lengas, Nikolaos A1 - Müller, Karsten A1 - Schlick-Hasper, Eva A1 - Neitsch, Marcel A1 - Johann, Sergej A1 - Zehn, M. W. T1 - Improved criteria for evaluating impact targets in regulative drop tests of dangerous goods packagings N2 - For dangerous goods packagings, drop testing onto an essential unyielding target can be used to assess the mechanical resistance to impact loads. Adopted regulations like ADR/RID require that the impact surface provided shall be integral with a mass at least 50 times than that of the heaviest package to be tested. The problem is that many manufacturers do not possess impact targets that satisfy the required 50 times mass ratio for regulative drop tests during series production. The objective of this work is to verify existing and define improved criteria for impact target structures based on systematic investigations. Previous evidence highlights the relevance of other parameters in addition to the mass ratio. Therefore, in this research, a variation of drop test parameters was carried out experimentally. Furthermore, numerical vibration analysis was applied to investigate the deformability of the impact surface. The results conclude that the mass ratio of 1:50 cannot be defined as a decisive criterion. In order to determine the influence of further drop test parameters, the research findings were used to validate a parametric model which assesses impact target deflection. An approximation quality of over 90 % was achieved. As a result, new evaluation criteria are proposed. Firstly, a method for identifying critical impact target designs is provided. Secondly, a new comprehensive formula compares the approximated maximum deflection of a real impact target to the respective theoretical threshold derived from a worst-case assumption. In practice, this leads to great advantages in the evaluation of already installed impact targets for dangerous goods packagings. T2 - 31st IAPRI Members’ conference CY - Mumbai, India DA - 22.05.2023 KW - Drop test KW - Structural dynamics KW - Dangerous goods packagings KW - Impact target KW - Vibration analysis PY - 2023 AN - OPUS4-57715 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lengas, Nikolaos A1 - Mair, Georg W. A1 - Müller, Karsten A1 - Sklorz, Christian A1 - Wang, Bin A1 - Natasya, Riska T1 - Overview of experimental testing at BAM: Hydraulic pressure, drop and fire tests N2 - Safe onboard storage is clearly one of the greatest challenges for the hydrogen economy. Even if hydrogen vehicles offer better efficiency, technological barriers remain for short-term implementation. Hydrogen storage difficulties stem from its low density, necessitating very high pressure for storage. In addition, the weight, volume, efficiency, safety of storage as well as the cost of the hydrogen must be considered. Safety is of paramount importance for deployment of hydrogen technologies as it is flammable in a wide range of concentrations with air, more sensitive to ignition due to its low minimum ignition energy, deflagrates faster due to higher burning velocity, and is prone to deflagration-to-detonation transition. Various safety measures must be implemented in order to prevent accidental leakage and ensure inherent safety. Today, the strategy of the OEM’s prioritises the development of a single electrical drivetrain platform where the battery pack is mounted in the underbody of the vehicle. The automotive industry aims to use this same space for hydrogen storage systems, with the expectation that such conformable hydrogen storage systems will be available in the next 3-5 years. The main innovations of BAM’s specialist divisions 3.5 and 8.6 in this project are, firstly, the integration of optical fibres in the filament winding of complete pressure to gain a deeper understanding of the structural behaviour under the different hydraulic and pneumatic loading conditions, and secondly, the development of a fire test platform to test the assembly of 9 tubular vessels under the fire test requirements of GTR13. Therefore, a wind damping and splinter-protecting cage was built from protection modules specifically developed for this project. Extensive safety-related tests are to be carried out at BAM during the project period. T2 - Stakeholders’ Meeting CY - Brussels, Belgium DA - 26.09.2024 KW - Composite pressure vessel KW - Drop test KW - Hydraulic pressure test KW - Fire test PY - 2024 AN - OPUS4-61167 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, W. T1 - Deterioration of historic art enamels by indoor polution T2 - 18th International Congress on Glass CY - San Francisco, CA, USA DA - 1998-07-05 PY - 1998 AN - OPUS4-7251 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -