TY - CHAP A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, P. A1 - Zäh, M. A1 - Schönlein, A. A1 - Müller, A. A1 - Vatahska, T. A1 - Manier, G. A1 - Reichert, T. ED - White, C. C. ED - Martin, J. ED - Chapin, J.T. T1 - Polypropylene numerical photoageing simulation by dose-response functions with respect to irradiation and temperature: vipquali project N2 - The aim of the joint project ViPQuali (Virtual Product Qualification) was to describe a component’s ageing behaviour in a given environment, by numerical simulation. Having chosen polypropylene (PP) as the material, which does not show sensitivity to moisture, the relevant weathering parameters of the dose–response functions could be limited to spectral irradiance and temperature. In artificial irradiation tests, for PP plates of varied stabiliser content, spectral sensitivity as well as temperature dependence of irradiation-caused crack formation was quantified. For that purpose, samples were exposed both to artificial weathering tests at various constant temperatures and to spectrally resolved irradiation. The temperature dependence could be modelled by an Arrhenius fit. For fitting the spectral sensitivity, a plateau function was chosen. Subsequently, the stabiliser content was parameterised and extrapolated. The formed dose–response functions were incorporated into a Computational Fluid Dynamics (CFD) software program, simulating the environment of a sample within a Phoenix-exposed IP/DP (Instrument Panel/Door Panel box) box, based on sun position and weather conditions, including radiation interactions. Observed local effects as well as the general ageing advance of PP hats are compared with respect to simulation and experiment. Resulting from this project, for this most simple example of PP of varied stabiliser content, the time to failure can be estimated for each weathering exposure environment with known time-resolved irradiance and temperature conditions. PY - 2015 SN - 978-3-319-06033-0 SN - 978-3-319-06034-7 DO - https://doi.org/10.1007/978-3-319-06034-7_14 SP - Chapter 14, 215 EP - 229 PB - Springer AN - OPUS4-32062 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stephan, H. A1 - Kubeil, M. A1 - Emmerling, Franziska A1 - Müller, C.E. T1 - Polyoxometalates as versatile enzyme inhibitors N2 - Polyoxometalates (POMs) are inorganic cluster compounds that have been shown to possess a number of pharmacological properties, including antidiabetic, antibacterial, antiprotozoal, antiviral and anticancer activities. Their molecular mechanism of action is largely unknown. However, several studies indicate that many of their activities may be due to the inhibition of enzymes, in particular, of those enzymes that are accessible from the extracellular space and do not require the penetration of cell membranes. In this review, we describe the recent progress in the preparation and optimization of POMs, and an evaluation of their use as inhibitors of different families of enzymes. The next important steps in this area of research will be to gain a better understanding of the interactions of POMs with enzymes on a structural level through an X-ray crystallographic study of enzyme–POM complexes and the analysis of structure–activity relationships. Furthermore, POMs with increased stability and in vivo half-lives have to be prepared. Surface modification may allow the targeting of POM drugs at their sites of action. KW - Cluster compounds KW - Poly­oxometalates KW - Metalloprotein mimics KW - Enzymes KW - Inhibitors KW - Bioinorganic chemistry PY - 2013 DO - https://doi.org/10.1002/ejic.201201224 SN - 1434-1948 SN - 1099-0682 VL - 2013 IS - 10-11 SP - 1585 EP - 1594 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-28076 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herbst, Tristan A1 - Rübner, Katrin A1 - Müller, A. A1 - Seidemann, M. T1 - Verwertung kieselsäurehaltiger Filterrückstände in mineralischen Baustoffen N2 - Kieselsäurehaltige Filterrückstände (FR) fallen als feuchter Filterkuchen bei der Aufbereitung von Abwässern der chemischen Industrie an. Die Rückstände werden zurzeit kostenpflichtig auf Deponien entsorgt oder zur Tagebaufüllung eingesetzt. Jedoch besitzen die Filterrückstände aufgrund ihrer chemisch-mineralogischen Zusammensetzung und ihrer physikalischen Eigenschaften, insbesondere ihres hohen Gehalts an amorpher Kieselsäure und ihrerhohen spezifischen Oberfläche, sehr . gute materialtechnische Voraussetzungen zur Wiederverwertung in mineralischen Baustoffen. Im Verbundforschungsvorhaben „NanoKiesel - Nanoskaliger Kieselsäureschlamm“ wurden Technologien zur FR-Verwertung als puzzolanischer Bestandteil in zementhaltigen Bindemitteln und alsRohstoffkomponente für Wandbaustoffe entwickelt. Hauptziel war dabei die Verbesserung der Werkstoffeigenschaften, wie Festigkeit und Rohdichte. Bei einer Beurteilung des möglichen Einsatzpotenzials der Filterrückstände spielen neben der materialtechnischen Eignung auch ökologische und ökonomische Fragestellungen eine wichtige Rolle. Nur eine ganzheitliche Nachhaltigkeitsbetrachtung der technischen, ökologischen und ökonomischen Aspekte ermöglicht Aussagen über den optimalen Verwertungsweg der Filterrückstände. Im Beitrag wird über die Ergebnisse der Nachhaltigkeitsbetrachtungen für die verschiedenen Anwendungen berichtet. T2 - GDCh-Tagung Bauchemie 2012 CY - Dübendorf, Switzerland DA - 11.10.2012 PY - 2012 SN - 978-3-936028-72-0 N1 - Serientitel: GDCh-Monographien – Series title: GDCh-Monographien VL - 45 SP - 149 CY - Frankfurt/M. AN - OPUS4-27600 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schwarz, G. A1 - Müller, Larissa A1 - Beck, S. A1 - Linscheid, M.W. T1 - DOTA based metal labels for protein quantification: a review N2 - Today, quantitative data play a pivotal role in the understanding of biological processes. This is particularly true for the proteome: protein quantification always follows protein identification. To obtain useful and reliable quantitative data, rather sophisticated strategies using electrospray and MALDI mass spectrometry have been developed, which allow relative and sometimes even absolute quantification. All of those strategies have merits and limitations. In order to overcome some of these limits, methods based on the reliable and sensitive detection and quantification of heavy metals present in proteins using inductively coupled plasma (ICP)-MS have been reported. With specific labels carrying heavy metals, the applicability of ICP-MS has been extended to almost every protein. One of such covalently bound metal tags, allowing the quantification of low abundant proteins, uses 1,4,7,10-tetraazacyclododecane N,N',N'',N''-tetraacetic acid (DOTA) chelate complexes carrying lanthanides as the metal core. In this review the scope and limitations of peptide and protein quantification will be addressed. The metal tags do not only provide low detection limits, but also due to the large number of different lanthanides and lanthanide isotopes, multiplexing capabilities and previously unknown accuracy based on inherently possible isotope dilution methods came into reach. The developed workflows, including electrophoretic and chromatographic separation and preconcentration techniques, will be addressed to allow a comparison with already established procedures. KW - Protein quantification KW - ICP-MS KW - DOTA KW - Labeling PY - 2014 DO - https://doi.org/10.1039/c3ja50277e SN - 0267-9477 SN - 1364-5544 VL - 29 IS - 2 SP - 221 EP - 233 PB - Royal Society of Chemistry CY - London AN - OPUS4-30730 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gardei, André A1 - Garcia, O. A1 - Riedl, Martin A1 - Vanhellemond, I. A1 - Suput, J.S. A1 - Santarelli, M.-L. A1 - Rodríguez-Maribona, I. A1 - Müller, Urs ED - Jadwiga W. Lukaszewicz, ED - Piotr Niemcewicz, T1 - Performance and durability of a new antigraffiti system for cultural heritage - the EC project GRAFFITAGE T2 - 11th International Congress on Deterioration and Conservation of Stone CY - Torun, Poland DA - 2008-09-15 KW - Cultural heritage KW - Antigraffiti system KW - Sandstone KW - Limestone KW - Brick KW - Monument KW - Cleaning KW - Historische Baustoffe PY - 2008 SN - 978-83-231-2237-1 VL - II SP - 889 EP - 897 PB - Nicolaus Copernicus University Press CY - Torun, Poland AN - OPUS4-18844 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Urs A1 - Kanan, M.I.C. ED - Cincotto. M., ED - Da Silva, D. ED - de Oliveira, J. T1 - The Micro Structure of Traditional Brazilian Lime Plasters - The Custom House of Florianopolis T2 - VI Simpósio Brasileiro de Tecnologia de Argamassas / I International Symposium on Mortars Technology CY - Florianopolis, Brazil DA - 2005-05-23 KW - Shell lime KW - Micro structure KW - Custom House KW - Plaster PY - 2005 SP - 736 EP - 745 PB - UFSC-Universidade Federal de Santa Catarina CY - Santa Catarina AN - OPUS4-10560 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wisniewski, W. A1 - Thieme, C. A1 - Müller, Ralf A1 - Reinsch, Stefan A1 - Groß-Barsnick, S.-M. A1 - Rüssel, C. T1 - Oriented surface nucleation and crystal growth in a 18BaO·22CaO·60SiO2 mol% glass used for SOFC seals N2 - A glass of the composition 37BaO·16CaO·47SiO2 wt% produced on an industrial scale is crystallized at 970 °C for times ranging from 15 min to 2 h. The crystallization at the immediate surface as well as the crystal growth into the bulk are analyzed using scanning electron microscopy (SEM) including energy dispersive X-ray spectroscopy (EDXS) and electron backscatter diffraction (EBSD) as well as X-ray diffraction in the Θ–2Θ setup (XRD). The immediate surface shows the oriented nucleation of walstromite as well as the formation of wollastonite and an unknown phase of the composition BaCaSi3O8. All three phases also grow into the bulk where walstromite ultimately dominates the kinetic selection and grows throughout the bulk due to a lack of bulk nucleation. Walstromite shows systematic orientation changes as well as twinning during growth. A critical analysis of the XRD-patterns acquired from various crystallized samples indicates that their evaluation is problematic and that phases detected by XRD in this system should be verified by another method such as EDXS. KW - Glass KW - Surface nucleation KW - Orientation KW - EBSD PY - 2018 DO - https://doi.org/10.1039/c7ce02008b VL - 20 IS - 6 SP - 787 EP - 795 PB - Royal Society of Chemistry AN - OPUS4-44405 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hsuan, Y.G. A1 - Schröder, Hartmut A1 - Rowe, K. A1 - Müller, Werner A1 - Greenwood, J. A1 - Cazzuffi, D. A1 - Koerner, R.M. ED - Neil Dixon, T1 - Long-term performance and lifetime prediction of geosynthetics N2 - To properly understand and assess the long-term behaviour of geosynthetic materials it is necessary to investigate the various types of possible degradation mechanims. This includes both chemical and mechanical behaviour, and sometimes even their interactions with one another. Clearly, chemical degradation of geosynthetics depends on the polymer type. For example, polyolefins are vulnerable to oxidation; polyesters are susceptible to hydrolysis; and plasticizers can leach from polyvinyl chloride. This paper describes the concept of these three types of degradation, but focuses on the oxidation of polyolefins since the majority of the geosynthetics is made from this type of polymer. The methods used to predict the lifetime of antioxidants and service life of the geosynthetic material will be illustrated. Furthermore, the influence of temperature, pressure, and ultraviolet light on the service life are also demonstrated. Finally, the current specifications targeting the longevity of different geosynthetics are presented. Regarding mechanical degradation, the paper mainly focuses upon the creep deformation of geogrids and stress crack resistance (SCR) of polyethylene geomembranes and geopipe. The method to assess stress crack resistance is described, and the microscopic mechanisms that lead to such failure are explained. For creep evaluation, different acceleration tests are presented and their applicability with respect to the different types of polymers is illustrated. In addition, the long-term shear behaviour of geocomposites and geosynthetic clay liners is presented. T2 - 4th European Geosynthetics Conference - EuroGeo4 CY - Edinburgh, Scotland, UK DA - 2008-09-07 KW - Geosynthetic KW - Durability KW - Degradation KW - Antioxidant KW - Weathering PY - 2008 SP - 1 EP - 41 AN - OPUS4-17975 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reinsch, Stefan A1 - Nascimento, M.L.F. A1 - Müller, Ralf A1 - Zanotto, E. D. T1 - Crystal growth kinetics in cordierite and diopside glasses in wide temperature ranges N2 - We measured and collected literature data for the crystal growth rate, u(T), of µ-cordierite (2MgO · 2Al2O3 · 5SiO2) and diopside (CaO · MgO · 2SiO2) in their isochemical glass forming melts. The data cover exceptionally wide temperature ranges, i.e. 800–1350 °C for cordierite and 750–1378 °C for diopside. The maximum of u(T) occurs at about 1250 °C for both systems. A smooth shoulder is observed around 970 °C for µ-cordierite. Based on measured and collected viscosity data, we fitted u(T) using standard crystal growth models. For diopside, the experimental u(T) fits well to the 2D surface nucleation model and also to the screw dislocation growth mechanism. However, the screw dislocation model yields parameters of more significant physical meaning. For cordierite, these two models also describe the experimental growth rates. However, the best fittings of u(T) including the observed shoulder, were attained for a combined mechanism, assuming that the melt/crystal interface growing from screw dislocations is additionally roughened by superimposed 2D surface nucleation at large undercoolings, starting at a temperature around the shoulder. The good fittings indicate that viscosity can be used to assess the transport mechanism that determines crystal growth in these two systems, from the melting point Tm down to about Tg, with no sign of a breakdown of the Stokes–Einstein/Eyring equation. KW - Crystal growth KW - Oxide glasses KW - Silicates KW - Kristallwachstumsgeschwindigkeit KW - Kinetik KW - Silikatgläser PY - 2008 DO - https://doi.org/10.1016/j.jnoncrysol.2008.09.007 SN - 0022-3093 VL - 354 IS - 52-54 SP - 5386 EP - 5394 PB - North-Holland Publ. Co. CY - Amsterdam AN - OPUS4-18383 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinsch, Stefan A1 - Müller, Ralf A1 - Nascimento, M.L.F. A1 - Zanotto, E. D. T1 - Crystal Growth Mechanism in Cordierite and Diopside Glasses in Wide Temperature Ranges T2 - XX. International Congress on Glass CY - Kyoto, Japan DA - 2004-09-26 KW - Cordierite KW - Diopside KW - Glass KW - Crystal growth PY - 2004 SP - 6 pages PB - Ceramic Society of Japan CY - Tokio AN - OPUS4-4389 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, M.E.H. A1 - Urban, K. A1 - Köppen, Robert A1 - Siegel, David A1 - Korn, U. A1 - Koch, Matthias T1 - Mycotoxins as antagonistic or supporting agents in the interaction between phytopathogenic Fusarium and Alternaria fungi N2 - The role of mycotoxins in the microbial competition in an ecosystem or on the same host plant is still unclear. Therefore, a laboratory study was conducted to evaluate the influence of mycotoxins on growth and mycotoxin production of Fusarium and Alternaria fungi. Fusarium culmorum Fc13, Fusarium graminearum Fg23 and two Alternaria tenuissima isolates (At18 and At220) were incubated on wheat kernels supplemented with alternariol (AOH), tetramic acid derivates (TeA), deoxynivalenol (DON) and zearalenone (ZEA) in an in vitro test system. Fungal biomass was quantified by determining ergosterol content. Three Fusarium toxins (DON, nivalenol and ZEA) and three Alternaria toxins (AOH, alternariol methyl ether (AME) and altenuene) were analysed by HPLC-MS/MS. If Alternaria strains grew in wheat kernels spiked with Fusarium mycotoxins, their growth rates were moderately increased, their AOH and AME production was enhanced and they were simultaneously capable of degrading the Fusarium mycotoxins DON and ZEA. In contrast, both Fusarium strains behaved quite differently. The growth rate of Fc13 was not distinctly influenced, while Fg23 increased its growth in wheat kernels spiked with AOH. TeA depressed the ergosterol content in Fc13 as well as in Fg23. The DON production of Fc13 was slightly depressed, whereas the ZEA production was significantly increased. In contrast, Fg23 restricted its ZEA production. Both Fusarium strains were not capable of degrading the Alternaria mycotoxin AOH. Mycotoxins might play an important role in the interfungal competitive processes. They influence growth rates and mycotoxin production of the antagonistic combatants. The observed effects between phytopathogenic Alternaria and Fusarium strains and their mycotoxins aid the understanding of the complexity of microbial competitive behaviour in natural environments. KW - Phytopathogen KW - Trichothecenes KW - Alternaria mycotoxins KW - Multi-mycotoxin analysis KW - Inter-fungal competition PY - 2015 DO - https://doi.org/10.3920/WMJ2014.1747 SN - 1875-0710 SN - 1875-0796 VL - 8 IS - 3 SP - 311 EP - 321 PB - Wageningen Academic Publishers CY - Wageningen AN - OPUS4-32849 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hoffmann, A. A1 - Lischeid, G. A1 - Koch, Matthias A1 - Lentzsch, P. A1 - Sommerfeld, Thomas A1 - Müller, M.H. T1 - Co-Cultivation of Fusarium, Alternaria, and Pseudomonas on Wheat-Ears Affects Microbial Growth and Mycotoxin Production N2 - Mycotoxigenic fungal pathogens Fusarium and Alternaria are a leading cause of loss in cereal production. On wheat-ears, they are confronted by bacterial antagonists such as pseudomonads. Studies on these groups’ interactions often neglect the infection process’s temporal aspects and the associated priority effects. In the present study, the focus was on how the first colonizer affects the subsequent ones. In a climate chamber experiment, wheat-ears were successively inoculated with two different strains (Alternaria enuissima At625, Fusarium graminearum Fg23, or Pseudomonas simiae Ps9). Over three weeks, microbial abundances and mycotoxin concentrations were analyzed and visualized via Self Organizing Maps with Sammon Mapping (SOM-SM). All three strains revealed different characteristics and strategies to deal with co-inoculation: Fg23, as the first colonizer, suppressed the establishment of At625 and Ps9. Nevertheless, primary inoculation of At625 reduced all of the Fusarium toxins and stopped Ps9 from establishing. Ps9 showed priority effects in delaying and blocking the production of the fungal mycotoxins. The SOM-SM analysis visualized the competitive strengths: Fg23 ranked first, At625 second, Ps9 third. Our findings of species-specific priority effects in a natural environment and the role of the mycotoxins involved are relevant for developing biocontrol strategies. KW - Antagonists KW - Microbe interactions KW - Mycotoxins KW - Priority effect KW - SOM-SM PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-521554 DO - https://doi.org/10.3390/microorganisms9020443 VL - 9 IS - 2 SP - 443 PB - MDPI AN - OPUS4-52155 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Laquai, René A1 - Müller, Bernd R. A1 - Nellesen, J. A1 - Hentschel, M.P. A1 - Kupsch, Andreas A1 - Tillmann, W. T1 - Synchrotron-Refraktion mit in-situ Zugbelastung zur Charakterisierung der Schadensentwicklung in Metall-Matrix- Kompositen N2 - Die Synchrotron-Refraktions-Topographie basiert auf der Brechung von Röntgenstrahlung an den Grenzflächen zwischen Materialien mit unterschiedlichem Brechungsindex. Refraktionseffekte verändern die Ausbreitungsrichtung der Röntgenstrahlung, welche mit Hilfe der Methode des Analyser-Based Imaging analysiert wird. Dabei wird ein Silizium-Einkristall im Strahlengang zwischen Probe und Detektor platziert. Dieser Analysator-Kristall filtert, innerhalb seiner Streuebene, die Röntgenstrahlung gemäß ihrer Ausbreitungsrichtung. Durch das Rastern verschiedener Winkelpositionen des Analysator-Kristalls erhält man das Winkelspektrum der von der Probe gebrochenen Strahlung. Aus dieser Rocking Curve lässt sich die spezifische innere Oberfläche der Probe bestimmen. Diese Information wird über einen 2D-Detektor mit einer nominellen Pixelgröße von 3,6 μm gewonnen. Die Installation einer Zugprüfmaschine ermöglicht es die Proben in verschiedenen Lastzuständen insitu zu untersuchen. Damit ist es möglich die spezifische innere Oberfläche in Abhängigkeit der Last darzustellen und so Schädigungsmechanismen abzuleiten. Der Vorteil bei der Ausnutzung des Refraktionseffekts gegenüber der einfachen Durchstrahlung ist die höhere Sensitivität gegenüber Defekten mit geringem Volumen aber großer Oberfläche. Somit werden auch Mikrorisse und, speziell bei Kompositen, die Enthaftung zwischen Matrix und Verstärkung (Partikel, Fasern) erfasst. In dieser Studie wurden Metall-Matrix-Komposite bestehend aus einer Aluminium-Matrix verstärkt mit Aluminiumoxid-Partikeln untersucht. Hierzu wurden knochenförmige Zugproben präpariert, deren Messlänge einen rechteckigen Querschnitt von 1,7 mm × 1,3 mm aufwies. Die Proben wurden einem Zugversuch unterzogen, welcher in Intervallen unterbrochen wurde. Bei jeder Unterbrechung wurde unter quasi-statischer Last die Rocking Curve gemessen und ein Radiogramm der spezifischen inneren Oberflächen berechnet. Dabei konnte ab dem Erreichen einer Last von ca. 600 N ein Anstieg der spezifischen inneren Oberfläche beobachtet werden. Demgegenüber zeigen die zum Vergleich durchgeführten Durchstrahlungsaufnahmen keinerlei Defekte. Daher belegt diese Untersuchung das Potential der Refraktion-Topographie zur frühzeitigen Erkennung von Schädigungen mit hoher Empfindlichkeit. T2 - DGZfP Jahrestagung 2017 CY - Koblenz, Germany DA - 22.05.2017 KW - Metall-Matrix-Komposite KW - Schadensentwicklung KW - Röntgen-Refraktions-Radiographie KW - In-situ Zugbelastung PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-405794 SN - 978-3-940283-85-6 SP - 1 EP - 7 PB - DGZfP AN - OPUS4-40579 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schnell, A. A1 - Müller, A. A1 - Rübner, Katrin A1 - Ludwig, H.-M. ED - Thomé-Kozmiensky, K.J. ED - Goldmann, D. T1 - Mineralische Bauabfälle als Rohstoff für die Herstellung leichter Gesteinskörnungen N2 - enden Mengen und die erreichten Recyclingquoten sind in den seit 1996 erscheinenden Monitoringberichten der Arbeitsgemeinschaft Kreislaufwirtschaftsträger Bau dargestellt. In dem 2011 erschienen Bericht wird ausgewiesen, dass im Jahr 2008 58,2 Millionen Tonnen Bauschutt bestehend aus Beton- und Mauerwerkabbruch anfielen. Die Recyclingquoten bewegen sich um die 70 Prozent. Das in stationären oder mobilen Anlagen aufbereitete Material wird hauptsächlich im Tief- und Landschaftsbau eingesetzt. Ein Einsatz im Hochbau erfolgt nur durch einzelne Unternehmen. Hierbei werden hauptsächlich rezyklierte grobe Gesteinskörnungen für Normalbeton aus Betonbruch gewonnen. Heterogener Mauerwerkbruch, der Wandbaustoffe, Mörtel, Putz, Fliesen und weitere Bestandteile enthält, oder die bei der Aufbereitung zwangsläufig entstehenden Feinfraktionen finden bisher keine Verwendung. KW - Bauschutt KW - Bauabfälle KW - Leichte Gesteinskörnung KW - Stoffliches Recycling KW - Granulate PY - 2012 SN - 978-3-935317-81-8 VL - 5 SP - 469 EP - 494 PB - TK-Verl. CY - Neuruppin AN - OPUS4-25709 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, M.E.H. A1 - Steier, I. A1 - Köppen, Robert A1 - Proske, Matthias A1 - Korn, U. A1 - Koch, Matthias A1 - Siegel, David T1 - Cocultivation of phytopathogenic Fusarium and Alternaria strains affects fungal growth and mycotoxin production N2 - Aims: A laboratory study was conducted to evaluate the influence of cocultivation of toxigenic Fusarium (F.) and Alternaria (A.) fungi with respect to growth and mycotoxin production. Methods and Results: Fusarium culmorum Fc13, Fusarium graminearum Fg23 and two Alternaria tenuissima isolates (At18 and At220) were simultaneously or consecutively co-incubated on wheat kernels in an in vitro test system. Fungal biomass was quantified by determining ergosterol content. Three Fusarium toxins (DON, NIV and ZON) and three Alternaria toxins (AOH, AME and ALT) were analysed by a newly developed HPLC/MS/MS method. In simultaneous cocultures, the fungal biomass was enhanced up to 460% compared with individual cultures; Alternaria toxins were considerably depressed down to <5%. Combining At18 and At220 with Fg23 inhibited the toxin production of both fungal partners. In contrast, Fc13 increased its DON and ZON production in competitive interaction with both A. strains. Conclusions: The interfungal competitive effects aid the understanding of the processes of competition of both fungi in natural environments and the involvement of mycotoxins as antifungal factors. Significance and Impact of Study: Cocultivation significantly affects fungal growth and mycotoxin production of phytopathogenic Alternaria and Fusarium strains. The impact of mycotoxins on the interfungal competition is highlighted. KW - Alternaria KW - Cocultivation KW - Ergosterol KW - Fusarium KW - Interfungal competition KW - Multimycotoxin analysis PY - 2012 DO - https://doi.org/10.1111/j.1365-2672.2012.05388.x SN - 1364-5072 VL - 113 IS - 4 SP - 874 EP - 887 PB - Wiley-Blackwell CY - Malden, Mass., USA AN - OPUS4-26932 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -