TY - CONF A1 - Müller, B. A1 - Dahms, A. A1 - Bitter, F. A1 - Wargocki, P. A1 - Olesen, B. A1 - Knudsen, H.N. A1 - Afshari, A. A1 - Jann, Oliver A1 - Horn, Wolfgang A1 - Müller, D. A1 - Airaksinen, M. A1 - Järnström, H. A1 - Tirkkonen, T. A1 - Witterseh, T. T1 - Material labelling: Combined material emission tests and sensory evaluations T2 - Indoor Air 2008, 11th International Conference on Indoor Air Quality and Climate CY - Copenhagen, Denmark DA - 2008-08-17 KW - Material labelling KW - Emission test KW - Sensory evaluation KW - Odour intensity KW - Acceptability PY - 2008 IS - Paper 1066 SP - 1 EP - 8 AN - OPUS4-18047 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, B. A1 - Dahms, A. A1 - Knudsen, H.N. A1 - Afshari, A. A1 - Wargocki, P. A1 - Olesen, B. A1 - Berglund, B. A1 - Ramalho, O. A1 - Goschnick, J. A1 - Häringer, D. A1 - Jann, Oliver A1 - Horn, Wolfgang A1 - Nesa, D. A1 - Chanie, E. A1 - Ruponen, M. A1 - Müller, D. T1 - Measuring perceived air quality and intensity by a Sensor System, the European Project SysPAQ T2 - Indoor Air 2008, 11th International Conference on Indoor Air Quality and Climate CY - Copenhagen, Denmark DA - 2008-08-17 KW - Perceived air quality KW - Perceived odour intensity KW - Profiling KW - Sensor system PY - 2008 IS - Paper ID: 530 SP - 1 EP - 8 AN - OPUS4-18302 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ahrendt, H. A1 - Gesatzke, Roger A1 - Hahn, G. A1 - Herrmann, P. A1 - Julien, H. A1 - Karger, R. A1 - Kaufmann, M. A1 - Krebs, H.-J. A1 - Lucht, J. A1 - Müller, A. A1 - Müller, R. A1 - Vetter, B. T1 - Überdruckmessgeräte nach DIN EN 837 - Auswahl und Anwendung KW - Druckmessgerät KW - Sicherheit PY - 2007 SN - 978-3-410-16626-9 IS - 1. Auflage SP - 1 EP - 89 PB - Beuth CY - Berlin AN - OPUS4-15994 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, B. A1 - Bitter, F. A1 - Müller, D. A1 - Knudsen, H.N. A1 - Afshari, A. A1 - Wargocki, P. A1 - Olesen, B. A1 - Berglund, B. A1 - Ramalho, O. A1 - Goschnick, J. A1 - Jann, Oliver A1 - Horn, Wolfgang A1 - Nesa, D. A1 - Chanie, E. A1 - Ruponen, M. T1 - Messung der empfundenen Geruchsintensität mit Multigas-Sensorsystemen, das Forschungsvorhaben SysPAQ KW - Geruch KW - Sensorsystem KW - Perceived Air Quality KW - Produkttypischer Geruch KW - Bauprodukte KW - Emissionen PY - 2007 SN - 978-3-18-091995-9 SN - 0083-5560 IS - 1995 SP - 17 EP - 29 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-16370 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kasche, J. A1 - Dahms, A. A1 - Müller, B. A1 - Müller, D. A1 - Horn, Wolfgang A1 - Jann, Oliver T1 - Olfaktorische Bewertung von Baumaterialien T2 - 7th Workshop "Odour and Emissions of Plastic Materials" CY - Kassel, Germany DA - 0005-04-04 KW - Bauprodukte KW - Emissionen KW - Geruch KW - Kammerverfahren KW - VOC PY - 2005 SP - 5-1-5-12 PB - Kassel University Press GmbH CY - Kassel AN - OPUS4-7363 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ewers, Benjamin A1 - Kupsch, Andreas A1 - Lange, Axel A1 - Müller, Bernd R. A1 - Hoehl, a. A1 - Müller, R. A1 - Ulm, G. T1 - Terahertz spectral computed tomography N2 - The novel technique of spectral THz computed tomography is demonstrated at an example of a small plastic figure. The data are reconstructed by conventional filtered back-projection. The reconstruction are discussed. T2 - IRMMW-THz 2009 - 34th International conference on infrared, millimeter, and terahertz waves CY - Busan, Korea DA - 2009-09-21 KW - THz KW - Computed tomography PY - 2009 SN - 978-1-4244-2120-6 SP - 1 EP - 2(?) AN - OPUS4-20546 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schnell, A. A1 - Rübner, Katrin A1 - Seher, Julia A1 - Müller, A. A1 - Liebezeit, S. A1 - Fenner, J. A1 - Martin, F. A1 - Pniok, N. T1 - REALight ‐ Leichtgranulate und REA‐Gips aus feinkörnigen sulfatbelasteten Bau‐ und Abbruchabfällen N2 - Ziel des Projekts REALight ist die Entwicklung einer Referenzanlage zur Herstellung von Leichtgranulaten (leichte Gesteinskörnungen) aus Bau‐ und Abbruchabfällen und zur Gipsrückgewinnung. Als Rohstoffe werden bisher ungenutzte oder auf niedrigem Niveau eingesetzte Bau‐ und Abbruchabfälle und industrielle Nebenprodukte verwendet. Als Produkte werden leichte Gesteinskörnungen hergestellt. Die Sulfatabtrennung durch eine thermische Zersetzung bildet die Grundlage für die zusätzliche Gewinnung von Rauchgasentschwefelungs‐Gips (REA‐Gips). Das Projekt wird im Rahmen der Fördermaßnahme „Ressourceneffiziente Kreislaufwirtschaft – Bauen und Mineralische Stoffkreisläufe (ReMin)” gefördert. ReMin ist eine Maßnahme zur Umsetzung des BMBF‐Forschungskonzepts „Ressourceneffiziente Kreislaufwirtschaft” als Teil der BMBF Strategie „Forschung für nachhaltige Entwicklung – FONA”. Ziel der Förderung ist es, den Ausbau der Kreislaufwirtschaft voranzutreiben. Im Mittelpunkt steht dabei die Bauwirtschaft mit ihrer hohen Nachfrage nach Rohstoffen und gleichzeitig großen Mengen an anfallenden mineralischen Abfällen. Am Projekt REALight sind 12 Partner aus verschiedenen Bereichen der Baustoffherstellung und ‐anwendung, Abfallaufbereitung, Verfahrenstechnik sowie Forschung und Entwicklung beteiligt. T2 - 21. Internationale Baustofftagung (ibausil) CY - Weimar, Germany DA - 13.09.2023 KW - Baustoffrecycling KW - Leichtgranulate KW - Gips KW - Leichte Gesteinskörnungen KW - Drehrohrofen KW - Recycling KW - Mauerwerkbruch KW - Infraleichtbeton PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-591708 DO - https://doi.org/10.1002/cepa.2840 SN - 2509-7075 VL - 6 IS - 6 SP - 530 EP - 536 PB - Ernst & Sohn CY - Berlin AN - OPUS4-59170 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina A1 - Rosenthal, Martina A1 - Gaal, Mate A1 - Guelle, D. A1 - Lewis, A. A1 - Sieber, A. T1 - Proposals for Performance Demonstration and Modular Reliability Assessment for Humanitarian Demining N2 - For safe and reliable demining it is necessary to determine the actual true performance of mine searching equipment in detecting mines. The subject to detect a hidden subject by penetrating physical interaction with the target is similar to that of non-destructive testing where it is looked for hidden cracks etc. in material via waves and rays. The non destructive testing profession is now about 100 years old and developed some procedures to check reliability of testing. Those principles like the performance demonstration where the successful detections are statistically evaluated against false calls rates and their implementation in an industrial standard (ASME section XI appendix VIII) are analysed. A first adoption to demining was accomplished in the prescription for blind trials in the CEN workshop agreement CEN BT 126 CWA07 for test and evaluation of metal detectors. A number of blind trials were accomplished within an ITEP project to learn about the necessary statistical layout of those trials to achieve true, reproducible and repeatable results to give guidance to selection and improvement of metal detectors. The special focus in these investigations was on the influence of the human factor due to the degree of experience of the operators and the infulence of uncooperative soil. The correlation of the results of the physical parameter measurement and the statistical results is analysed in a first attempt. T2 - EUDEM2-SCOT conference on requirements and technologies for the detection, removal and neutralization of landmines and UXO CY - Brussels, Belgium DA - 2003-09-15 PY - 2003 UR - http://www.itep.ws/pdf/Mueller_Eudem2003_1.pdf N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. VL - 1 SP - 233 EP - 241 AN - OPUS4-2785 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Seah, M.P. A1 - Spencer, S.J. A1 - Bensebaa, F. A1 - Vickridge, I. A1 - Danzebrink, H. A1 - Krumrey, M. A1 - Gross, Thomas A1 - Österle, Werner A1 - Wendler, E. A1 - Rheinländer, B. A1 - Azuma, Y. A1 - Kojima, I. A1 - Suzuki, N. A1 - Suzuki, M. A1 - Tanuma, S. A1 - Moon, D.W. A1 - Lee, H.J. A1 - Cho, H.M. A1 - Chen, H.Y. A1 - Wee, A. T. S. A1 - Osipowicz, T. A1 - Pan, J.S. A1 - Jordaan, W.A. A1 - Hauert, R. A1 - Klotz, U. A1 - van der Marel, C. A1 - Verheijen, M. A1 - Tamminga, Y. A1 - Jeynes, C. A1 - Bailey, P. A1 - Biswas, S. A1 - Falke, U. A1 - Nguyen, N.V. A1 - Chandler-Horowitz, D. A1 - Ehrstein, J.R. A1 - Muller, D. A1 - Dura, J.A. T1 - Ultra-thin SiO2 on Si, Part V: Results of a CCQM Pilot Study of Thickness Measurements KW - SiO2 KW - Thin films KW - Thickness KW - XPS KW - Ellipsometry KW - TEM PY - 2003 SN - 1473-2734 SP - 57 pages AN - OPUS4-4118 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Schnell, A. A1 - Rübner, Katrin A1 - Müller, A. T1 - Leichtgranulate aus Mauerwerkbruch für die Betonherstellung N2 - Im Forschungsprojekt „Aufbaukörnungen“ wird eine Technologie zur Herstellung hochwertiger Leichtgranulate aus sekundären Rohstoffen auf der Basis von heterogenen und teilweise feinkörnigen Bau- und Abbruchabfallen entwickelt. Im Mittelpunkt der Untersuchungen steht der Mauerwerkbruch, der größere Verwertungsdefizite als Betonbruch aufweist, Im Jahr 2010 fielen in Deutschland neben den rund 6 Mio. Tonnen reiner Ziegelabfälle mehr als 20 Mio. Tonnen ziegelhaltige Gemische als Bau- und Abbruchabfälle an. Der Verwertungsstrategie liegt die Idee des rohstofflichen Recyclings zu Grunde. Das heißt, nicht die physikalischmechanischen Eigenschaften des Mauerwerkbruchs, sondern sein Rohstoffpotenzial wird genutzt. Das Recycling baut auf der chemisch-mineralogischen Zusammensetzung des Ausgangsmaterials auf. Die Leichtgranulate(Aufbaukörnungen) werden am Ende eines mehrstufigen Herstellungsprozesses durch thermische oder hydrothermale Erhärtung produziert. Im vorliegenden Beitrag werden der Herstellungsprozess beschrieben und die Ergebnisse zu den chemischen und physikalischen Eigenschaften der hergestellten Leichtgranulate denen von vergleichbaren handelsüblichen Blähtönen gegenübergestellt. Entscheidend für die Eignung einer leichten Gesteinskörnung ist jedoch letztlich ihre Leistungsfähigkeit im Beton. Daher wurden Betone mit den neuartigen Leichtgranulaten hergestellt. Über die Festbetoneigenschaften wird ebenfalls berichtet. KW - Leichtgranulate KW - Leichtbeton KW - Leichte Gesteinskörnung KW - Mauerwerkbruch KW - Rohstoffliches Recycling PY - 2013 SN - 978-3-433-03017-2 SN - 978-3-433-60296-6 SN - 0170-4958 VL - 38 IS - Kap. 2.2.10 SP - 648 EP - 653 PB - Ernst & Sohn AN - OPUS4-28567 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, A. A1 - Palzer, U. A1 - Rübner, Katrin A1 - Schnell, A. T1 - Lightweight aggregates - a new thermally bound lightweight aggregate of high resource efficiency - Lightweight concrete / Aufbaukörnungen - Eine neue thermisch gebundene leichte Gesteinskörnung mit hoher Ressourceneffizienz - Leichtbeton N2 - Recycling materials from building construction can currently not be adequately recycled. Reasons for this are their considerable heterogeneity in terms of materials composition and high fine partide content. Recycling as filling material and in the construction of waste disposal facilities, or as landfill, will in future no longer be possible in view of the stringent application of the German law of lifecyde management and/or the steady decrease of waste-disposal capacities. In this context, the joint research project “lightweight aggregates,” supported by the German Federal Ministry for Education and Research, a technology for manufacturing lightweight aggregates was developed. KW - Blähgranulate KW - Leichtbeton KW - Leichte Gesteinskörnung KW - Mauerwerkbruch KW - Recycling PY - 2013 SN - 0373-4331 SN - 1865-6528 N1 - Sprachen: Deutsch/Englisch - Languages: German/English VL - 79 IS - 2 SP - 124 EP - 126 PB - Bauverl. CY - Gütersloh AN - OPUS4-28641 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Schnell, A. A1 - Müller, A. A1 - Rübner, Katrin ED - Woidasky, J. ED - Ostertag, K. ED - Stier, C. T1 - Entwicklung von Leichtgranulaten aus Mauerwerkbruch für die Betonherstellung N2 - Bau- und Abbruchabfälle stellen den größten Abfallstrom in Deutschland dar. Die anfallenden Mengen und die erreichten Recyclingquoten sind in den seit 1996 erscheinenden Monitoring-Berichten der Arbeitsgemeinschaft Kreislaufwirtschaftsträger Bau dargestellt. In dem 2013 erschienenen Bericht [BV Baustoffe 2013] wird ausgewiesen, dass im Jahr 2010 53.1 Millionen Tonnen Bauschutt (ohne Straßenaufbruch) bestehend aus Beton- und Mauerwerkabbruch anfielen. Im Jahr 2010 fielen in Deutschland neben den rund 6 Mio. Tonnen reiner Ziegelabfalle mehr als 20 Mio. Tonnen ziegelhaltige Gemische als Bau- und Abbruchabfälle an [destatis 2012], Das in stationären oder mobilen Anlagen aufbereitete Material wird hauptsächlich im Tief- und Landschaftsbau eingesetzt. Ein Einsatz im Hochbau erfolgt nur vereinzelt. Hierbei werden rezyklierte grobe Gesteinskörnungen für Normalbeton aus Betonbruch gewonnen. Heterogener Mauerwerkbruch, der Wandbaustoffe, Mörtel, Putz, Fliesen und weitere Bestandteile enthält, oder die bei der Aufbereitung zwangsläufig entstehenden Feinfraktionen finden bisher keine Verwendung. Ursachen dafür sind die erhebliche Heterogenität in Bezug auf die Materialzusammensetzung und der große Feinkornanteil. Die Verwertung als Verfullmaterial und im Deponiebau oder die Deponierung selbst wird zukünftig durch die strikte Anwendung des Kreislaufwirtschaftsgesetzes bzw. den stetigen Rückgang von Deponiekapazitäten nicht mehr möglich sein. KW - Aufbaukörnungen KW - Leichtgranulate KW - Leichtbeton KW - Leichte Gesteinskörnung KW - Mauerwerkbruch KW - Nachhaltigkeit KW - Recycling PY - 2013 SN - 978-3-8396-0596-7 IS - Kap. 4.2.1 SP - 300 EP - 316 PB - Fraunhofer Verlag CY - Karlsruhe AN - OPUS4-30068 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rübner, Katrin A1 - Peplinski, Burkhard A1 - Hempel, S. A1 - Schnell, A. A1 - Müller, A. T1 - Novel lightweight aggregates from masonry rubble N2 - Most lightweight aggregates (LWA) are produced by thermal Treatment of natural raw materials such as clay and shale. In addition to the high energy costs thereby incurred, the availability of suitable raw materials is limited. Other LWA manufactured from industrial by-products and wastes do not always meet the quality criteria for use in high-Quality lightweight concrete. A real alternative is the use of novel lightweight aggregates (referred to as LWA, aggregates and granules) made from mineral construction and demolition waste. An appropriate manufacturing technology has recently been developed in the framework of a German research project /1, 2/. Masonry rubble of variable grain size containing different amounts of brick material (25 to 70 %) serves as raw material. The LWA are obtained in a multistage manufacturing process by a thermal or hydrothermal treatment, which causes the expansion and the hardening of the material. The novel LWA meet the acceptance criteria for conventional lightweight aggregates. They are suitable for the production of lightweight concrete /2-6/. However to create tailor-made LWA from masonry rubble, the novel expanded materials and the influence of manufacturing conditions have to be understood in more detail. This paper reports on ongoing investigations of the chemico-mineralogical composition and microstructure of the novel LWA and focuses on the results of Chemical analyses, XRD, ESEM, TG/DTA and fusibility tests. T2 - 1st International conference on the chemistry of construction materials CY - Berlin, Germany DA - 2013-10-07 KW - Lightweight aggregates KW - Lightweight concrete KW - Masonry rubble KW - Construction and demolition waste KW - Recycling KW - Sustainability PY - 2013 SN - 978-3-936028-75-1 N1 - Serientitel: GDCh-Monographien – Series title: GDCh-Monographien VL - 46 SP - 27 EP - 30 AN - OPUS4-30067 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, A. A1 - Schnell, A. A1 - Rübner, Katrin T1 - Die Herstellung von Leichtgranulaten aus Mauerwerkbruch N2 - Heterogene und feinkörnige Bauabflle aus Mauerwerkbruch lassen sich heute nur auf einem sehr geringen Qualittsniveau verwerten. Um diese Situation zu überwinden, wird deren Verwendung als Ausgangsstoff für die Herstellung von leichten Gesteinskörnungen vorgeschlagen, die hnlich wie Blhtone und Blhschiefer in einem thermischen Prozess erzeugt werden. Dafür wurde zunchst die grundstzliche Eignung von Mauerwerkbruch bewertet. Es folgten experimentelle Untersuchungen, in welchen nachgewiesen werden konnte, dass Leichtgranulate mit definierten, einstellbaren Eigenschaften aus Mauerwerkbruch herstellbar sind. Sie sind in ihren Eigenschaften den leichten Gesteinskörnungen aus natürlichen Rohstoffen mindestens ebenbürtig. Die daraus hergestellten, gefügedichten Leichtbetone erzielen durchweg vergleichbare Werte wie die Leichtbetone mit herkömmlichem Blhton. Leichtgranulate aus Mauerwerkbruch stellen ein Produkt dar, dessen Herstellung nahezu ohne Primrrohstoffe auskommt. Das Verfahrensprinzip scheint außerdem prdestiniert für die hochwertige Verwertung auch anderer mineralischer Reststoffe zu sein.--------------------------------------------------------------------------------------------------------------------------------------------------- Production of lightweight aggregate from masonry rubble. At present, heterogeneous and fine-grained masonry rubble can only be recycled at very low quality. To overcome this limitation, the material was employed as feedstock for the production of lightweight aggregates in a thermal process similar to that used in the manufacture of expanded clay and expanded slate. To that end, the fundamental suitability of masonry rubble as a raw material was evaluated. Experiments were carried out which indicated that lightweight granules with defined, modifiable proper-ties on a par with to those of natural-material- based aggregates could be manufactured from masonry rubble. Structural lightweight concretes produced with these secondary aggregates achieved comparable performance to lightweight concretes produced with conventional expanded clay. Lightweight recycled building material aggregates represent a product that hardly requires any primary resources in its manufacture. In principle, the technique also seems to be well suited for high-quality recycling of other mineral waste materials. KW - Recycling KW - Mauerwerkbruch KW - Blähprozess KW - Drehrohrofen KW - Gesteinskörnung, leichte KW - Leichtbeton KW - Ressourceneinsparung KW - Masonry rubble KW - Expansion process KW - Rotary kiln KW - Lightweight aggregate KW - Lightweight concrete KW - Resource efficiency KW - Ökologie KW - Ecology PY - 2013 DO - https://doi.org/10.1002/dama.201300599 SN - 1432-3427 SN - 1437-1022 VL - 17 IS - 6 SP - 365 EP - 371 PB - Ernst CY - Berlin AN - OPUS4-30069 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jakubcová, Petra A1 - Schnell, A. A1 - Rübner, Katrin A1 - Müller, A. A1 - Meng, Birgit T1 - Nutzung von Bau- und Abbruchabfällen zur Herstellung von Recyclinggranulaten T2 - Tagung Bauchemie der GDCh-Fachgruppe Bauchemie 2010 CY - Dortmund, Deutschland DA - 2010-10-07 KW - Sekundärrohstoffe KW - Sekundäre Gesteinskörnung KW - Recycling PY - 2010 SN - 978-3-936028-65-2 VL - 42 SP - 129 EP - 136 AN - OPUS4-22444 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schnell, A. A1 - Müller, A. A1 - Rübner, Katrin T1 - Aufbaukörnungen - Heterogener Bauschutt als Rohstoff für die Herstellung von Leichtgranulaten T2 - Symposium "Rohstoffeffizienz und Rohstoffinnovationen" CY - Nuremberg, Germany DA - 2011-02-10 PY - 2011 AN - OPUS4-23247 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, B. A1 - Dahms, A. A1 - Jakob, B. A1 - Knudsen, H.N. A1 - Afshari, A. A1 - Wargocki, P. A1 - Olesen, B. A1 - Berglund, B. A1 - Ramalho, O. A1 - Häringer, D. A1 - Jann, Oliver A1 - Horn, Wolfgang A1 - Nesa, D. A1 - Loubet, F. A1 - Ruponen, M. T1 - Measuring perceived air quality and intensity by means of sensor systems, the European Project SysPAQ T2 - Healthy buildings 2009 - 9th International conference & exhibition CY - Syracuse, NY, USA DA - 2009-09-13 KW - Sensor systems KW - Perceived air quality KW - Perceived intensity PY - 2009 IS - Paper 326 SP - 1 EP - 4 CY - Syracuse, NY, USA AN - OPUS4-20106 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rübner, Katrin A1 - Schnell, A. A1 - Haamkens, Frank A1 - Jakubcová, Petra A1 - Müller, A. T1 - Leichte Gesteinskörnungen aus Mauerwerkbruch für die Betonherstellung N2 - Im Forschungsprojekt „Aufbaukörnungen“ wird eine Technologie zur Herstellung hochwertiger Leichtgranulate aus sekundären Rohstoffen auf der Basis von heterogenen und teilweise feinkörnigen Bau- und Abbruchabfällen entwickelt. Im Mittelpunkt der Untersuchungen steht der Mauerwerkbruch. Er fällt in Deutschland mit bis zu 10 Millionen Tonnen pro Jahr an und weist größere Verwertungsdefizite als Betonbruch auf. Der Verwertungsstrategie liegt die Idee des rohstofflichen Recyclings zu Grunde. Das heißt, nicht die physikalisch-mechanischen Eigenschaften des Mauerwerkbruchs, sondern sein Rohstoffpotenzial wird genutzt. Das Recycling baut auf der chemisch-mineralogischen Zusammensetzung des Ausgangsmaterials auf. Die Leichtgranulate (Aufbaukörnungen) werden am Ende eines mehrstufigen Herstellungsprozesses durch thermische oder hydrothermale Erhärtung produziert. T2 - 18. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 12.09.2012 KW - Leichtbeton KW - Leichte Gesteinskörnung KW - Mauerwerkbruch KW - Recycling KW - Blähgranulate PY - 2012 SN - 978-3-00-034075-8 VL - 2 IS - 3.07 SP - 2-1058 EP - 2-1065 AN - OPUS4-26547 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pan, Z. A1 - Waurischk, Tina A1 - Duval, A. A1 - Müller, Ralf A1 - Deubener, J. A1 - Krishnan, N. M. A. A1 - Wondraczek, K. A1 - Wondraczek, L. T1 - Precise Real‐Time Measurement of Liquid Viscosity Using Digital Video Data N2 - Quantitative knowledge of liquid viscosity is of fundamental importance in many areas of materials synthesis and processing. However, the determination of viscosity often relies on specialized experimental equipment, offline experimentation, or invasive procedures, in particular when required in extreme conditions such as at high temperature, high pressure, and in confined or corrosive environments. Here, this study proposes and validates a fast and simple method that mimics the intuitive perception of liquid flow within a quantitative framework. For this, this study employs digital video observation to derive quantitative values of the shear viscosity of liquids, with high precision and rapid acquisition rates. The technique involves capturing liquid dynamics after minor mechanical stimulation. Processed imaging data are indexed by similarity and referenced to a digital database generated with a finite element model, from which values of viscosity are obtained in line. The approach is tested on water at room temperature and on a high‐temperature glass melt. Covering a viscosity range of four orders of magnitude, both yield convincing agreement with tabulated reference data at low computational cost. KW - Glass KW - Liquid Viscosity KW - Digital Video Data KW - Finite Element Method PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-651363 DO - https://doi.org/10.1002/aisy.202500297 SN - 2640-4567 VL - 7 IS - 12 SP - 1 EP - 12 PB - Wiley VHC-Verlag AN - OPUS4-65136 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schnell, A. A1 - Müller, A. A1 - Rübner, Katrin A1 - Ludwig, H.-M. ED - Thomé-Kozmiensky, K.J. ED - Goldmann, D. T1 - Mineralische Bauabfälle als Rohstoff für die Herstellung leichter Gesteinskörnungen N2 - enden Mengen und die erreichten Recyclingquoten sind in den seit 1996 erscheinenden Monitoringberichten der Arbeitsgemeinschaft Kreislaufwirtschaftsträger Bau dargestellt. In dem 2011 erschienen Bericht wird ausgewiesen, dass im Jahr 2008 58,2 Millionen Tonnen Bauschutt bestehend aus Beton- und Mauerwerkabbruch anfielen. Die Recyclingquoten bewegen sich um die 70 Prozent. Das in stationären oder mobilen Anlagen aufbereitete Material wird hauptsächlich im Tief- und Landschaftsbau eingesetzt. Ein Einsatz im Hochbau erfolgt nur durch einzelne Unternehmen. Hierbei werden hauptsächlich rezyklierte grobe Gesteinskörnungen für Normalbeton aus Betonbruch gewonnen. Heterogener Mauerwerkbruch, der Wandbaustoffe, Mörtel, Putz, Fliesen und weitere Bestandteile enthält, oder die bei der Aufbereitung zwangsläufig entstehenden Feinfraktionen finden bisher keine Verwendung. KW - Bauschutt KW - Bauabfälle KW - Leichte Gesteinskörnung KW - Stoffliches Recycling KW - Granulate PY - 2012 SN - 978-3-935317-81-8 VL - 5 SP - 469 EP - 494 PB - TK-Verl. CY - Neuruppin AN - OPUS4-25709 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, P. A1 - Zäh, M. A1 - Schönlein, A. A1 - Müller, A. A1 - Vatahska, T. A1 - Manier, G. A1 - Reichert, T. ED - White, C. C. ED - Martin, J. ED - Chapin, J.T. T1 - Polypropylene numerical photoageing simulation by dose-response functions with respect to irradiation and temperature: vipquali project N2 - The aim of the joint project ViPQuali (Virtual Product Qualification) was to describe a component’s ageing behaviour in a given environment, by numerical simulation. Having chosen polypropylene (PP) as the material, which does not show sensitivity to moisture, the relevant weathering parameters of the dose–response functions could be limited to spectral irradiance and temperature. In artificial irradiation tests, for PP plates of varied stabiliser content, spectral sensitivity as well as temperature dependence of irradiation-caused crack formation was quantified. For that purpose, samples were exposed both to artificial weathering tests at various constant temperatures and to spectrally resolved irradiation. The temperature dependence could be modelled by an Arrhenius fit. For fitting the spectral sensitivity, a plateau function was chosen. Subsequently, the stabiliser content was parameterised and extrapolated. The formed dose–response functions were incorporated into a Computational Fluid Dynamics (CFD) software program, simulating the environment of a sample within a Phoenix-exposed IP/DP (Instrument Panel/Door Panel box) box, based on sun position and weather conditions, including radiation interactions. Observed local effects as well as the general ageing advance of PP hats are compared with respect to simulation and experiment. Resulting from this project, for this most simple example of PP of varied stabiliser content, the time to failure can be estimated for each weathering exposure environment with known time-resolved irradiance and temperature conditions. PY - 2015 SN - 978-3-319-06033-0 SN - 978-3-319-06034-7 DO - https://doi.org/10.1007/978-3-319-06034-7_14 SP - Chapter 14, 215 EP - 229 PB - Springer AN - OPUS4-32062 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Merchel, Silke A1 - Geppert, Ch. A1 - Herpers, U. A1 - Müller, P. A1 - Schmitt, A. A1 - Schnabel, Ch. A1 - Synal, H.-A. A1 - Wendt, K. T1 - Bestimmung von 41Ca mittels resonanter Laserionisations-Massenspektrometrie und deren Anwendungsmöglichkeiten T2 - Frühjahrstagung. Deutsche Physikalische Gesellschaft PY - 2002 SN - 0420-0195 N1 - Serientitel: Verhandlungen der Deutschen Physikalischen Gesellschaft – Series title: Verhandlungen der Deutschen Physikalischen Gesellschaft IS - 37.2002,2 PB - Physik-Verl. CY - Weinheim AN - OPUS4-1321 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rack, A. A1 - Riesemeier, Heinrich A1 - Zabler, S. A1 - Weitkamp, T. A1 - Müller, Bernd R. A1 - Weidemann, Gerd A1 - Modregger, P. A1 - Banhart, J. A1 - Helfen, L. A1 - Danilewsky, A.N. A1 - Gräber, H.G. A1 - Heldele, R. A1 - Mayzel, B. A1 - Goebbels, Jürgen A1 - Baumbach, T. ED - Stuart R. Stock, T1 - The high-resolution synchrotron-based imaging stations at the BAMline (BESSY) and TopoTomo (ANKA) N2 - The BAMline at the BESSY light source in Berlin and the TopoTomo beamline at the ANKA synchrotron facility in Karlsruhe (both Germany) operate in the hard X-ray regime (above 6 keV) with similiar photon flux density. For typical imaging applications, a double multilayer monochromator or a filtered white beam is used. In order to optimise the field of view and the resolution of the available indirect pixel detectors, different optical systems have been installed, adapted, respectively, to a large field of view (macroscope) and to high spatial resolution (microscope). They can be combined with different camera systems, ranging from 16-bit dynamic range slow-scan CCDs to fast CMOS cameras. The spatial resolution can be brought substantially beyond the micrometer limit by using a Bragg magnifier. The moderate flux of both beamlines compared to other 3rd generation light sources is compensated by a dedicated scintillator concept. For selected applications, X-ray beam collimation has proven to be a reliable approach to increase the available photon flux density. Absorption contrast, phase contrast, holotomography and refraction-enhanced imaging are used depending on the application. Additionally, at the TopoTomo beamline digital white beam synchrotron topography is performed, using the digital X-ray pixel detectors installed. KW - Microtomography KW - Non-destructive evaluation KW - Coherent imaging KW - X-ray refraction KW - X-ray phase contrast KW - Synchrotron-CT KW - Synchrotron instrumentation KW - Scintillator KW - Bragg magnification KW - Holotomography KW - X-ray topography PY - 2008 DO - https://doi.org/10.1117/12.793721 SN - 0277-786X VL - 7078 SP - 70780X-1 - 70780X-9 AN - OPUS4-18296 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, B. A1 - Panasková, J. A1 - Müller, D. A1 - Horn, Wolfgang A1 - Jann, Oliver A1 - Scutaru, A.M. A1 - Plehn, W. T1 - Entwicklungen der Bewertungsmethodik von Gerüchen in Innenräumen N2 - Um eine gute Luftqualität in Gebäuden zu erreichen, müssen Reinigungslasten durch Lüften aus Räumen abgeführt bzw. vermieden oder verringert werden. Wird der Luftwechsel verringert, verschlechtert sich die Raumluftqualität, und die Zufriedenheit der Nutzer nimmt ab. An Arbeitsplätzen kann es bei schlechter Luftqualität und der daraus resultierenden Unzufriedenheit zu einer geringeren Produktivität der Beschäftigten kommen. Um die Reinigungslasten und deren Wirkung auf den Raumnutzer überdas Geruchsempfinden zu verringern, ist neben einer messtechnischen Erfassung der Verunreinigungen auch eine sensorische Prüfung in Innenräumen und von Bauprodukten notwendig. In diesem Artikel wird die Entwicklung der Bewertungsmethodik von Gerüchen im Innenraum erläutert und auf Anwendungen eingegangen. KW - Geruch KW - Innenraum KW - Bauprodukte KW - Bewertung PY - 2014 SN - 2195-643X VL - 135 IS - 2 SP - 70 EP - 82 PB - DIV Deutscher Industrieverlag GmbH CY - München AN - OPUS4-32403 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina A1 - Gaal, Mate A1 - Scharmach, Martina A1 - Bär, Sylke A1 - Lewis, A. A1 - Bloodworth, T. A1 - Guelle, D. A1 - Pavkovic, N. A1 - Steker, I. T1 - Metalldetektor-Tests in Oberjettenberg November 2003 - Bundeswehrteststelle WTD 52 N2 - Dieses Poster befasst sich mit Testfeldern und Kalibrierflächen, Training, Minensuche in den Testfeldern, Ausmessung der Minenanzeigen, Dateiangabe und Analyse und dem Ausgraben der gefundenen Minen T2 - ITEP-Workshop 2003 CY - Berlin, Germany DA - 16.12.2003 KW - Testfelder KW - Kalibrierflächen KW - Minensuche PY - 2003 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-35853 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Masendorf, R. A1 - Müller, C. A1 - Henkel, C. A1 - Klingelhöffer, Hellmuth A1 - Klubberg, F. A1 - Scholz, A. A1 - Wagener, R. ED - Borsutzki, M. ED - Moninger, G. T1 - DIN 50100 Schwingfestigkeitsversuch - Aktueller Stand der Überarbeitung N2 - DIN 50100 definiert die Bedingungen für den Schwingfestigkeitsversuch, der zur Ermittlung von Kennwerten dient, die das Verhalten metallischer Werkstoffe und Bauteile bei zyklischer Beanspruchung mit einer konstanten Lastamplitude beschreiben (Wöhlerversuch). Die Norm umfasst die Versuchsdurchführung, die Versuchsauswertung sowie die Dokumentation von lastgeregelten Wöhlerversuchen im Zeit- und Langzeitfestigkeitsbereich. Mit DIN 50100 soll erreicht werden, dass die Wöhlerlinien verschiedener Prüfstellen miteinander vergleichbar und die wesentlichen Randbedingungen der Versuchsdurchführung dokumentiert werden. Da die Ergebnisse von Schwingfestigkeitsversuchen streuen, ist die Treffsicherheit für die Schätzung der Kennwerte von der Anzahl der Versuche einer Versuchsreihe abhängig. In Abhängigkeit von einer geforderten Treffsicherheit wird durch die DIN 50100 der erforderliche Stichprobenumfang vorgegeben. T2 - Tagung Werkstoffprüfung 2014 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis CY - Bad Neuenahr, Germany DA - 03.12.2015 PY - 2015 SN - 978-3-514-00816-8 SP - 175 EP - 180 PB - Verlag Stahleisen CY - Düsseldorf AN - OPUS4-35176 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosemann, Paul A1 - Müller, C. A1 - Roßberg, S. A1 - Pensel, P. A1 - Halle, T. A1 - Burkert, A. T1 - Precipitation behavior and corrosion resistance of nickel-free, high-nitrogen austenitic stainless steels N2 - Nickel-free, nitrogen alloyed austenitic stainless-steels, with about 19 wt.-% Mn and 0,8 wt. % N, are an interesting alternative to classic CrNi austenitic stainless steels due to their superior mechanical properties (Rm > 900 MPa, A5 > 50 %, Av > 350 J) in the solution annealed condition. The formation of chromium-rich nitrides during suboptimal heat treatment, processing or application leads to an inhomogeneous distribution of alloying elements in the microstructure, which reduces the corrosion resistance. Consequently, an accurate knowledge of the sensitization behavior is indispensable for the use of nickel-free, high-nitrogen austenitic stainless steels. The relationship between artificial aging, phase formation and corrosion resistance was investigated on the alloys X8CrMnN18-19 (1.3815) and X8CrMnMoN18-19-2 (1.4456), both alloyed with 0,8 wt.-% Nitrogen, in the present work. The microstructural evolution was studied by LM and SEM while the corrosion resistance was characterized with the electrochemical potentiodynamic reactivation (EPR) and the KorroPad indicator-test. Both alloys showed increased corrosion susceptibility within critical aging parameters. Finally, a sensitization diagram was described successfully for both alloys showing the positive effect of molybdenum. T2 - EUROCORR 2018 CY - Krakow, Poland DA - 09.09.2018 KW - Corrosion KW - KorroPad KW - Stainless steel KW - Corrosion resistance KW - Heat treatment KW - ThermoCalc KW - Pitting corrosion KW - Nitrogen PY - 2018 AN - OPUS4-45954 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Miccoli, Lorenzo A1 - Garofano, A. A1 - Fontana, Patrick A1 - Müller, U. ED - Jäger, W. T1 - Modellierung der mechanischen Eigenschaften von Lehmsteinmauerwerk unter statischer Druck- und Schubbeanspruchung N2 - In diesem Beitrag werden numerische Analysen der mechanischen Eigenschaften von Lehmsteinmauerwerk unter Druck- und Schubbeanspruchung vorgestellt. Ergebnisse von einachsigen Druck- und Schubversuchen an Wandprüfkörpern lieferten dafür grundlegende mechanische Kennwerte im elastischen Bereich und im nichtelastischen Versagenszustand.Die Testergebnisse zeigten, dass verschiedene Vorlasten keinen wesentlichen Einfluss auf die Schubfestigkeit haben. Außerdem bestätigten die Ergebnisse das spröde Verhalten von Lehmsteinmauerwerk unter einachsiger Druckbelastung und es zeigte sich, dass das Versagen des Lehmsteinmauerwerks unter Scherbelastung entlang der Mörtelfugen erfolgt. Die experimentellen Ergebnisse wurden verwendet, um das Verhalten von Lehmsteinmauerwerk durch nichtlineare Finite-Elemente-Methoden auf der Basis von Makro- und Mikro-Modellierungsansätzen zu simulieren. Entsprechendes konstitutives Materialverhalten und Zwängungen, die in den Versuchen durch die Art der Lasteinleitung in Form von Stahlprofilen und Stahlschuhen verursacht wurden, wurde in den Modellen berücksichtigt. Es wurde zuerst ein auf der Grundlage der experimentellen Daten kalibriertes Makro-Modell entwickelt, was zu einer brauchbaren Vorhersage des Versagensverhaltens der Mauerwerksprüfkörper führte. Die simulierten Spannungs-Dehnungs-Kurven, berechnet unter einachsiger Druckbelastung, zeigten eine gute Übereinstimmung mit den Ergebnissen der geprüften Mauerwerkskörper, sowohl im elastischen als auch im nichtelastischen Bereich. Ein vereinfachter Ansatz, basierend auf der Makro-Modellierung und einem homogenisierten Prüfkörper, kann für die Untersuchung größerer Tragsysteme oder ganzer Gebäude angewendet werden, wobei eine zufriedenstellende Genauigkeit bei geringerem Rechenaufwand erreicht wird. Obwohl das globale Spannungs-Dehnungs-Verhalten zufriedenstellend wiedergegeben wurde, ist ein solches nichtlineares isotropes Kontinuumsmodell für Lehmsteinmauerwerk nicht in vollem Umfang geeignet, um das bei den Versuchen beobachtete Rissbild an den Prüfkörpern zu simulieren. Eine detailliertere Analyse des mechanischen Verhaltensdes Mauerwerks wurde mit einem Mikro-Modellierungsansatz durchgeführt. Das Modell, in dem ein Wandabschnitt nicht mehr homogenisiert, sondern in konkrete Stein- und Fugenelemente diskretisiert wird, hat sich insbesondere für das Verhalten von Lehmsteinmauerwerk unter Schubbeanspruchung als geeignet erwiesen. Die Auswertung der Spannungsverteilungen bei der nichtlinearen Analyse lieferte Informationen über die tatsächlichen Mechanismen der Lastübertragung zwischen Steinen und Mörtelfugen. Mit dem Mikro-Modell war es möglich, das nichtlineare Verhalten von Lehmsteinmauerwerk vorherzusagen. Es stellt somit ein geeignetes Werkzeug für die Untersuchung der Versagensmechanismen von Lehmsteinmauerwerk dar. Allerdings sind aufgrund der Komplexität des Modells für die Beschreibung der Stein/Mörtel-Schnittstelle und die hohe Anzahl an erforderlichen mechanischen Parametern umfassendere Untersuchungen notwendig. Die zukünftige Forschung wird sich daher einerseits auf die Verfeinerung der numerischen Modelle und andererseits auf die Simulation komplexer Belastungssituationen und Gebäudekomponenten konzentrieren. KW - Lehmsteinmauerwerk KW - Mechanische Eigenschaften KW - Statische Druck- und Schubbeanspruchung KW - Lehmbau KW - Baustoffe PY - 2017 SN - 978-3-433-03161-2 SP - 195 EP - 208 PB - Ernst & Sohn CY - Berlin AN - OPUS4-39631 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Karsten A1 - Favre, A. A1 - Hilbert, F. A1 - Quercetti, Thomas A1 - Neumeyer, Tino A1 - Weingart, Barbara T1 - Prototype testing of a protective structural packaging for 30B cylinder N2 - Three drop test campaigns have been performed with DN 30 Protective Structural Packaging (PSP) developed by DAHER NUCLEAR TECHNOLOGIES GmbH for the transport of natural, enriched and reprocessed uranium hexafluoride (up to 5 wt%) in 30B cylinders. The mechanical prototype testing is intended to demonstrate that the package DN30 complies with regulatory requirements under normal and hypothetical accident conditions of transport (NCT, ACT) relevant to IF, AF and B(U)F packages, respectively. The paper includes the results of the latest test campaign carried out in 2015-2016 at the drop test facility of BAM, Germany with new full scale prototypes of the DN30 PSP and 30B cylinders. Repetition of drop test sequences became necessary after changing to Polyisocyanurate foam as shock absorbing material with variable foam densities. Furthermore, the mechanical behavior of the UF6 content of the 30B cylinder is now simulated by a mixture of cement and steel grid as modified surrogate material; instead of small steel balls. The behavior of this new content simulation is assumed to be more realistic with respect to the properties of real UF6. T2 - PATRAM 2016, 18th International Symposium on the Packaging and Transportation of Radioactive Materials CY - Kobe, Japan DA - 18.09.2016 KW - Drop test KW - Packaging KW - Radioactive material KW - Uranium hexafluoride PY - 2016 SP - Paper 1018, 1 EP - 11 PB - INMM CY - Deerfield, Illinois, USA AN - OPUS4-37568 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosemann, Paul A1 - Müller, C. A1 - Meyer, A. A1 - Halle, T. ED - Lampke, T. ED - Wagner, G. ED - Wagner, M. F.-X. T1 - Einfluss von Stickstoff auf Mikrostruktur und Korrosionsverhalten martensitischer nichtrostender Stähle N2 - Die Korrosionsbeständigkeit martensitischer nichtrostender Stähle (MNS) wird wesentlich von der chemischen Zusammensetzung und dem Wärmebehandlungszustand beeinflusst. Beides bestimmt die Verteilung der Legierungselemente im Gefüge und die daraus resultierenden Werkstoffeigenschaften. Das Legieren mit Stickstoff bewirkt im Allgemeinen eine Verbesserung der Lochkorrosionsbeständigkeit von nichtrostenden Stählen. Bei martensitischen nichtrostenden Stählen ist dieser Effekt nicht nur auf den Stickstoffgehalt selbst zurückzuführen, sondern auch auf den gleichzeitig verringerten Kohlenstoffgehalt, der ebenfalls das Ergebnis der Wärmebehandlung beeinflusst. In dieser Arbeit wird der Einfluss von Stickstoff auf die Korrosionsbeständigkeit in Bezug zum Härtungsprozess von MNS dargestellt. Dazu wird vergleichend der Effekt von Austenitisierungsdauer, -temperatur und Abkühlgeschwindigkeit auf Gefüge, Härte und Korrosionsbeständigkeit der MNS X50CrMoV15 und X30CrMoN15 1 untersucht. Die Abkühlgeschwindigkeit wurde mit dem Stirnabschreckversuch gezielt variiert, um den Einfluss von Abkühlgeschwindigkeiten von > 100 K/s bis 1 K/s zu charakterisieren. Die Veränderungen der Korrosionsbeständigkeit werden durch die elektrochemisch potentiodynamische Reaktivierung (EPR) und durch die Bestimmung kritischer Lochkorrosionspotentiale dokumentiert. Neben diesem experimentellen Ansatz werden auch die Ergebnisse von thermodynamischen Berechnungen mit der Software Thermocalc vorgestellt und abschließend auch zur Interpretation des Einflusses von Stickstoff auf die Korrosionsbeständigkeit martensitischer nichtrostender Stähle genutzt. T2 - 18. Werkstofftechnisches Kolloquium der TU Chemnitz CY - Chemnitz, Germany DA - 10.03.2016 KW - Korrosionsbeständigkeit KW - Corrosion resistance KW - Wärmebehandlung KW - Heat treatment KW - Nichtrostende Stähle KW - Stainless steels KW - Thermocalc KW - Thermocalc PY - 2016 SN - 978-3-00-052212-3 SN - 1439-1597 VL - 59 SP - 325 EP - 336 PB - TU Chemnitz, Fakultät für Maschinenbau, Institut für Werkstoffwissenschaft und Werkstofftechnik CY - Chemnitz AN - OPUS4-37263 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Österle, Werner A1 - Müller, Urs A1 - Desplanques, Y. A1 - Bulthé, A.-L. A1 - Degallaix, G. A1 - Dmitriev, A.I. T1 - 3rd Body formation of two different brake pad materials designed for railway application T2 - 5th European Conference on Braking (JEF 2006) CY - Lille, France DA - 2006-11-08 PY - 2006 SP - 107 EP - 115 AN - OPUS4-18699 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krumbholz, N. A1 - Jansen, A. A1 - Scheller, M. A1 - Müller-Wirts, T. A1 - Lübbecke, S. A1 - Holzwarth, R. A1 - Scheunemann, R. A1 - Wilk, R. A1 - Sartorius, B. A1 - Roehle, H. A1 - Stanze, D. A1 - Beckmann, Jörg A1 - von Chrzanowski, Lars A1 - Ewert, Uwe A1 - Koch, M. ED - Keith A. Krapels, ED - Neil A. Salmon, T1 - Handheld terahertz spectrometer for the detection of liquid explosives N2 - We present a handheld fiber-coupled terahertz spectrometer operating at a center wavelength of 1550 nm. The key elements are a fs-fiber laser, a fiber stretcher delay line and fiber-coupled antennas, which contain novel InAlAs-InGaAs multi layer chips. First experimental data obtained with this system demonstrates its great potential and robustness. In addition, we investigate different hazardous and harmless liquids in reflection geometry. These experiments show that liquids are in principle distinguishable by terahertz spectroscopy. Finally, first steps towards an algorithm that allows for an extraction of the liquids dielectric properties are discussed. The algorithm works for the analysis of reflection data even if the liquid is located inside a container. KW - Handheld terahertz spectrometer KW - Liquid explosives PY - 2009 DO - https://doi.org/10.1117/12.830381 SN - 0277-786X VL - 7485 SP - 748504-1 - 748504-12 AN - OPUS4-20268 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gaal, Mate A1 - Bär, Sylke A1 - Müller, Christina A1 - Rosenthal, Martina A1 - Bloodworth, T. A1 - Lewis, A. A1 - Guelle, D. ED - Harmon, R. S. T1 - Optimizing detector trials for humanitarian demining T2 - Conference 2004 CY - Orlando, FL, USA DA - 2004-04-12 KW - Zuverlässigkeit der Minensuche KW - Feldtests KW - Modulares Modell KW - Metalldetektor PY - 2004 SN - 0-8194-5338-2 DO - https://doi.org/10.1117/12.541124 SN - 1605-7422 N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 5415 SP - 1323 EP - 1334 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-6045 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Gaal, Mate A1 - Müller, Christina A1 - Rosenthal, Martina A1 - Ewert, Uwe A1 - Lewis, A. A1 - Bloodworth, T. A1 - Wilrich, Peter-Th. A1 - Guelle, D. T1 - ITEP project 2.1.1.2 - Final report - Reliability model for test and evaluation of metal detectors N2 - Metal detectors used in demining have been tested within the frame of the International Test and Evaluation Programme project ITEP 2.1.1.2. Detection reliability tests were performed in accordance with the CEN workshop agreement describing specifications for test and evaluation (CWA 14747:2003). Results of these tests are aimed to verify and should help to optimise the proposed testing procedures. KW - Zuverlässigkeit der Minensuche KW - Feldtests KW - Modulares Modell KW - Metalldetektor PY - 2004 UR - http://www.itep.ws/pdf/Itep_no2.1.1.2_reliability_model.pdf N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. SP - 1 EP - 51 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-6049 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Christina A1 - Gaal, Mate A1 - Rosenthal, Martina A1 - Bär, Sylke A1 - Lewis, A. A1 - Bloodworth, T. A1 - Guelle, D. A1 - Wilrich, Peter-Th. T1 - ITEP-Test Trials for Detection Reliability Assessment of Metal Detectors N2 - The total reliability of a mine searching system is driven by the triple of intrinsic capability, which describes the physical-technical basis capability, the application and environmental factors and the human factors. Some of them can be determined in laboratory measurements but the human factor and a part of environment conditions and their interaction with the device need to be treated statistically. That is why the test & evaluation procedure described in CEN CWA 14747:2003, includes in addition to parameter tests of metal detectors also the reliability or blind field tests under local conditions with local personnel. A series of three big field trials had been accomplished in the ITEP-project 2.1.1.2 “Reliability Model for Test & Evaluation of Metal Detectors” to specify the optimum conditions for reliable trial results with affordable effort. For each set of specific working conditions, characterized in terms of a combination of one mine type in one soil with one detector handled by local personnel, the searching system will show up a working performance in mine detection rates as a function of mine depth and show up a certain overall false call rate. During the ITEP-trials in Benkovac and Oberjettenberg the authors learnt to determine this function separately for each mine type in each soil, which is especially important for low metal mines in uncooperative soil which will be illustrated for the mine PMA2 in different types of soil. The question of representativeness for field conditions on the one hand and necessary statistical set up for the possibility to distinguish between individual detector performances is still under discussion. KW - Zuverlässigkeit der Minensuche KW - Feldtests KW - Modulares Modell KW - Metalldetektor PY - 2005 UR - http://maic.jmu.edu/journal/8.2/rd/mueller.htm SN - 1533-9440 SN - 1533-6905 N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. IS - 8.2 SP - 86 EP - 90 CY - Harrisonburg AN - OPUS4-6041 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaal, Mate A1 - Müller, Christina A1 - Osterloh, Kurt A1 - Rosenthal, Martina A1 - Ewert, Uwe A1 - Guelle, D. A1 - Lewis, A. T1 - Metal Detector Test Trials in Germany and Croatia - ITEP Project 2.1.1.2 T2 - MATEST 2003 NDT Achievements and Challenges CY - Brijuni-Pula, Croatia DA - 2003-09-28 KW - Demining KW - Metal detectors KW - Reliability tests KW - ROC diagrams KW - Test and evaluation KW - CWA07 PY - 2003 N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. SP - 1(?) EP - 15(?) AN - OPUS4-2784 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlaad, H. A1 - Müller, A. A1 - Spickermann, J. A1 - Räder, H. A1 - Krüger, Ralph-Peter T1 - Quantitative Analysis of Molecular Weight Distribution Obtained by Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry (MALDI-TOF-MS) T2 - 2nd International Conference on Molecular Mass Characterization of Synthetic and Natural Polymers CY - Bradford, England, UK DA - 1996-04-01 PY - 1996 CY - Bradford AN - OPUS4-2218 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, A. A1 - Krüger, Ralph-Peter T1 - Quantitative analysis of molecular weight distribution obtained by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry T2 - DECHEMA-Diskussionstagung "Neue Methoden der Polymeranalytik" CY - Mainz, Germany DA - 1996-10-07 PY - 1996 CY - Mainz AN - OPUS4-2224 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Mielke, Werner A1 - Hampe, Andreas A1 - Lützow, Wolfgang A1 - Müller, Hansjörg A1 - Pastuska, Gerhard A1 - Rook, A. A1 - Schnabel, E. A1 - Sickfeld, Jürgen A1 - Tobisch, Karl A1 - Trubiroha, Peter T1 - Einsatz von Kunststoffen in Pkw - Literaturstudie PY - 1990 SN - 0937-1214 IS - 2 SP - 9 EP - 257 PB - Bundesanstalt für Straßenwesen CY - Bergisch Gladbach AN - OPUS4-11796 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thiel, A. A1 - Eberstein, Markus A1 - Reinsch, Stefan A1 - Müller, Ralf A1 - Deubener, J. A1 - Schiller, Wolfgang Arno T1 - Viskosität von sinternden Glas/Kristallphasen-Kompositen T2 - 80. Glastechnische Tagung CY - Dresden, Deutschland DA - 2006-06-12 PY - 2006 SN - 3-921089-46-8 SP - 1(?) EP - 3(?) PB - Verl. d. Dt. Glastechn. Ges. CY - Offenbach AN - OPUS4-14045 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thiel, A. A1 - Eberstein, Markus A1 - Müller, Ralf A1 - Deubener, J. T1 - Viskosität von Glasmatrix-Kompositen mit partiell löslicher kristalliner Dispersphase T2 - 81. Glastechnische Tagung und 4. DGG-Symposium "Novel Optical Technologies" CY - Aachen, Deutschland DA - 2007-06-04 KW - Glasmatrixkomposite KW - Lösung KW - Sintern PY - 2007 SN - 978-3-921089-52-1 IS - CD-ROM SP - 1 EP - 8 PB - Deutsche Glastechnische Gesellschaft CY - Offenbach AN - OPUS4-16212 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Chabrelie, A. A1 - Müller, Urs A1 - Scrivener, K.L. ED - Palomo, Á. ED - Zaragoza, A. ED - Agüí, J. C. L. T1 - Mechanisms of degradation of concrete by external sufate ions under laboratory and field conditions N2 - The durability of concrete is a major challenge for the construction, which devotes one third to one half of its annual investment to building maintenance. The lack of fieid data regarding concrete durability, especially in the case of exposure to Sulfate ions (“sulfate attack”) makes it dijficult to determine the appropriate fest methods andperformance criteria. Additionally, the increased use of sustainable blends (cement with mineral admixtures, typically slag from the iron industiy) suffers from a lack of experience regarding their long-term performance. Most results for sulfate resistance are derived from accelerated laboratoiy tests xvhere performance criteria are based only on macroscopic properties, especially expansion. To fill this gap and better widerstand the mechanisms of sulfate attack under real conditions, a parallel study of laboratoiy micro-concrete and fieid concrete samples under sulfate exposure was undertaken, focussing on microstructural changes in addition to the conventional macroscopic characterisation. Four exposure regimes were designed in the laboratoiy: full immersion (ponding), pH-control, semi-immersion and wet/diy cycles. Pure Portland blends and slag blends witli high level of slag replacement (70 wt.-%) were investigated. The exposure regime has been found to play a major role in the damage process. In ponding conditions, the damage process takes place in three stages characterised by a first period of induction, followed by surface damage thatfinally extends to the bulle of the material. Paradoxically, the w/c-ratio does not seem to have much impact on the ionic transport phenomena but might be more decisive in the microstructure mechanical strength against local stresses. The slag blends, considered as sulfate resistant in ponding exposure, revealed badperformances under wet/diy cycles. This beliaviour was attributed to poor proper physical resistance of the slag hydrates against diying. The fieid concretes selected for the comparison with the laboratoiy cases were partially buried in a sulfate-enriched soil in Argentina. A pure Portland blend and a slag blends with high level of slag replacement (80 wt.-%) were investigated. The submerged part of the samples could be compared to the laboratoiy ponding exposure, wliile the upper layer of the samples subjected to weathering could be compared to the laboratoiy wet/diy cycles exposure. The fieid obsen’ations tend to confirm the laboratoiy results and validate the fest settings. It has been underlined that a direct relationship between damage (e.g.; cracking/expansion) andphase assemblage was not evident. However, the study highlights that sulfate combination with the hydrates of the cement (e.g.; C-S-H) and with those of the slag would play a rote in the initiation of the expansion, which would be attributed to a swelling of the hydrates or to the precipitation offine ettringite after the Saturation level in sulfate of the hydrates has been reached. T2 - 13th International congress on the chemistry of cement - XIII ICCC CY - Madrid, Spain DA - 03.07.2011 KW - Sulfate attack KW - Exposure conditions KW - Concrete KW - Laboratory test KW - Field KW - Phase assemblage KW - Microstructure KW - XRD KW - SEM KW - SCM KW - Slag PY - 2011 SN - 978-84-7292-400-0 SP - 1 EP - 14 CY - Madrid AN - OPUS4-24810 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Smith, A. A1 - Müller, Christina A1 - Rosenthal, Martina T1 - Accidents and Incidents in Humanitarian Demining (HD) - the Need to Keep Accurate Records for Meaningful Analysis T2 - European-American Workshop 2002 CY - Berlin, BAM, Germany DA - 2002-09-11 PY - 2002 N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. AN - OPUS4-2021 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Thieme-Hack, M. A1 - Berghaus, U. A1 - Brümmer, F. A1 - Elsner, U. A1 - Färber, C. A1 - Frank, D. A1 - Illgas, M. A1 - Kalbe, Ute A1 - Kathage, J. A1 - Leers, A. A1 - Müller, B. A1 - Röger-Göpfert, C. A1 - Russland, H.-J. A1 - Schnabel, B. A1 - Schneider, O. A1 - Schockmann, D. A1 - Schomakers, H. A1 - Schwalbe, D. A1 - Stegemann, D. A1 - van den Berg, T. A1 - Kramps, S. T1 - Fachbericht Kunststoffsportböden - Nachhaltige Kunststoffbelagsauswahl für Sportfreianlagen N2 - Kunststoff- und Kunststoffrasenflächen kommt bei intensiv genutzten Flächen als Allwetterbeläge eine große Bedeutung zu. Sie leisten einen wichtigen Beitrag zur Absicherung eines ganzjähriger Sportangebote. Gerade Kunststoffrasen ist aber in den letzten Jahren häufig in die Kritik geraten, insbesondere durch gefährliche Inhaltsstoffe und andere negative Einflüsse auf die Umwelt. Dies hat bei Bauherren zu einer Verunsicherung geführt und Fragen aufgeworfen, die erst teilweise beantwortet sind. Die Diskussionen rund um diesen Allwetterbelag haben bereits dazu geführt, dass von Seiten der Industrie viel verändert wurde und neue innovative Lösungen gefunden werden. Der Fachbericht stellt eine Handreichung für Fachleute und interessierte Laien dar, um mehr Klarheit besonders hinsichtlich der Umweltanforderungen zu erzielen. KW - Kunststoffsportbeläge KW - Kunstrasen KW - Umweltverträglichkeit KW - Schadstofftransfer KW - Mikroplastik PY - 2022 UR - https://shop.fll.de/de/fachbericht-kunststoffsportboeden-broschuere.html SP - 1 EP - 70 PB - Forschungsgesellschaft Landschaftsentwicklung Landschaftsbau (FLL) CY - Bonn AN - OPUS4-54390 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heyn, A. A1 - Müller, Thoralf A1 - Balzer, M. A1 - Fenker, M. A1 - Kappl, H. T1 - Corrosion protection mechanisms of TiMgN hard coatings on steel N2 - . Hard coated steel components are used in a wide application range, mostly for protective, wear resistant and decorative purposes. Despite of these coatings being regarded as relatively dense, there is always a high risk of localized corrosion when a coated low alloyed steel component encounters a surrounding high humidity atmosphere or even an aqueous medium. An approach to enhance the corrosion properties is the addition of magnesium to physical vapor deposited hard coatings, like TiN. It has been found that there is a remarkable increase in corrosion resistance in dependence of magnesium content of the TiMgN coating and its surface properties. In this work the authors will explain the underlying corrosion protection mechanisms by means of electrochemical and analytical studies. The positive impact of magnesium in the coating relates on its preferred dissolution vs. steel. This causes the potential to shift to more negative direction with respect to the steel substrate and additionally leads to a temporarily passivation of the steel due to alkalization of the surrounding electrolyte by formation of magnesium hydroxide. T2 - 20. Werkstofftechnisches Kolloquium CY - Chemnitz, Germany DA - 14.03.2018 KW - Corrosion KW - Titanium nitride KW - PVD hard coating KW - Magnesium PY - 2018 SN - 978-3-00-058901-0 SN - 1439-1597 VL - 72 SP - 74 EP - 83 PB - Eigenverlag CY - Chemnitz AN - OPUS4-44526 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Waurischk, Tina A1 - Reinsch, Stefan A1 - Müller, Ralf A1 - Chen, Y.-F. A1 - Contreras Jaimes, A. T1 - Datengetriebener Workflow für die beschleunigte Entwicklung von Glas (GlasDigital) N2 - Das Projekt GlasDigital wurde im allgemeinen vorgestellt, sowie die einzelnen Zwischenstände der verschiedenen Arbeitspakete aller Projektpartner präsentiert. Die allgemeine Porjektvorstellung ist auf deutsch. Die Zwischenstände der Arbeitsinhalte sind auf englisch. T2 - PMD Vollversammlung CY - Berlin, Germany DA - 03.11.2022 KW - Oxidglas KW - Robotische Glasschmelzanlage KW - ML KW - Ontologie KW - Digitaler Zwilling KW - Bildanalyse PY - 2022 AN - OPUS4-56491 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Albert, F. A1 - Baum, S. A1 - Goecke, S. A1 - Müller, A. A1 - Sievi, P. A1 - Rethmeier, Michael T1 - Nahtgeführtes Laserstrahl-Remoteschweißen mit Strahloszillation - Beeinflussung der Schweißnahtanmutung, der Schweißnahtgeometrie und der Spaltüberbrückbarkeit PY - 2013 SN - 0036-7184 VL - 65 IS - 9 SP - 631 EP - 635 PB - Verl. für Schweißen u. Verwandte Verfahren, DVS-Verl. CY - Düsseldorf AN - OPUS4-29300 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, V. A1 - Marko, A. A1 - Kruse, T. A1 - Biegler, M. A1 - Rethmeier, Michael T1 - Analysis and recycling of bronze grinding waste to produce maritime components using directed energy deposition N2 - Additive manufacturing promises a high potential for the maritime sector. Directed Energy Deposition (DED) in particular offers the opportunity to produce large-volume maritime components like propeller hubs or blades without the need of a costly casting process. The post processing of such components usually generates a large amount of aluminum bronze grinding waste. The aim of the presented project is to develop a sustainable circular AM process chain for maritime components by recycling aluminum bronze grinding waste to be used as raw material to manufacture ship Propellers with a laser-powder DED process. In the present paper, grinding waste is investigated using a dynamic image Analysis system and compared to commercial DED powder. To be able to compare the material quality and to verify DED process parameters, semi-academic sample geometries are manufactured. T2 - LiM 2021 CY - Munich, Germany DA - 21.06.2021 KW - Additive Manufacturing KW - Maritime Components KW - Powder Analysis KW - Recycling KW - Directed Energy Deposition PY - 2021 SP - 1 EP - 9 AN - OPUS4-54067 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kasche, J. A1 - Dahms, A. A1 - Horn, Wolfgang A1 - Jann, Oliver A1 - Müller, D. T1 - Sensory evaluation of building products - Results of a German round robin test T2 - VDI-Tagung CY - Bad Kissingen, Deutschland DA - 2007-11-13 KW - Bauprodukte KW - Emissionen KW - Geruch KW - AbBB-Schema KW - Kammermessungen KW - Blauer Engel PY - 2007 SN - 978-3-18-091995-9 SN - 0083-5560 IS - 1995 SP - 193 EP - 202 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-16322 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - König, S. A1 - Diersch, R. A1 - Lührmann, A. A1 - Müller, Karsten A1 - Neumann, Martin A1 - Quercetti, Thomas A1 - Droste, Bernhard T1 - Full-Scale Drop Testing of the CONSTOR®, V/TC Package Program, and Preliminary Results KW - Drop test KW - Package KW - Spent fuel cask KW - Transport PY - 2005 SN - 0893-6188 VL - 33 IS - 3 SP - 4 EP - 10 PB - Institute of Nuclear Materials Management CY - Northbrook, Ill. AN - OPUS4-12269 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - König, S. A1 - Diersch, R. A1 - Lührmann, A. A1 - Müller, Karsten A1 - Neumann, Martin A1 - Quercetti, Thomas A1 - Droste, Bernhard T1 - Full-scale Drop Testing of the CONSTOR V/TC Package - Program and Preliminary Results KW - Fallversuche KW - Transportbehälter für radioaktive Stoffe PY - 2005 SN - 0893-6188 VL - 33 IS - 3 SP - 4 EP - 10 PB - Institute of Nuclear Materials Management CY - Northbrook, Ill. AN - OPUS4-6875 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gogula, Shravya A1 - Bornhöft, H. A1 - Wondraczek, L. A1 - Sierka, M. A1 - Diegeler, A. A1 - Müller, Ralf A1 - Deubener, J. T1 - Optical Real-Time Castability Evaluation for High-Throughput Glass Melting N2 - A novel optical real-time method for evaluating the castability of glass forming melts for laboratory furnaces is presented. The method is based on the analysis of top view images of the melt surface inside the crucible during melting after being subjected to a small mechanical impulse. In this way, the melt surface is excited to oscillate. The difference in contrast between two images taken in quick succession scales with the viscosity, with a larger diffe­rence occurring at lower viscosities. The method is designed as an instrument for the in-line evaluation of the castability for a high-throughput glass melting system as part of the joint project “GlasDigital” in the framework of the German Platform Material Digital initiative but is applicable to other laboratory furnaces as well. KW - Optical Real-Time Castability Check KW - Image Analysis PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-618659 DO - https://doi.org/10.52825/glass-europe.v2i.1359 VL - 2 SP - 83 EP - 93 AN - OPUS4-61865 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Blaeß, Carsten A1 - Boccaccini, A. R. A1 - Müller, Ralf T1 - Sintering and Crystallization of Fluoride-Containing Bioactive Glass F3 N2 - The fluoride-containing bioactive glass F3 with nominal composition (mol%) 44.8 SiO2 - 2.5 P2O3 - 36.5 CaO - 6.6 Na2O - 6.6 K2O - 3.0 CaF2 is a highly promising candidate for bone replacement applications. Its strong crystallization tendency, however, requires a thorough understanding of the interplay between glass powder particle size, surface crystallization, and sintering. Therefore, this study characterizes the sintering and crystallization of bulk specimens and various particle size fractions by differential thermal-analysis, laser scanning, electron microscopy, X-ray diffraction, and Infrared spectroscopy. Particle size fractions < 56 µm were found to fully densify, while crystals growing from the glass particle surface retard sintering of coarser fractions. Small amounts of a non-stoichiometrically calcium phosphosilicate (Ca14.92(PO4)2.35(SiO4)5.65) occurs as the primary crystal phase followed by combeite (Na4Ca4[Si6O18]) as a temporarily dominating phase. The surface crystallization of both pha­ses was found to be mainly responsible for sinter retardation. During later stages of crystallization, additional phases such as cuspidine (Ca4F2Si2O7) and silicorhenanite (Na2Ca4(PO4)2SiO4) occur, but finally monoclinic wollastonite (CaSiO3) forms as the dominant phase. KW - Bioactive Glass KW - Sintering KW - Crystallization PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-632482 DO - https://doi.org/10.52825/glass-europe.v3i.2564 SN - 2940-8830 VL - 3 SP - 105 EP - 124 AN - OPUS4-63248 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Eberstein, Markus A1 - Thiel, A. A1 - Reinsch, Stefan A1 - Müller, Ralf A1 - Deubener, J. A1 - Schiller, Wolfgang Arno T1 - Lösungs- und Kristallisationsvorgänge beim Sintern von Glasmatrix-Kompositen T2 - 79. Glastechnische Tagung CY - Würzburg, Deutschland DA - 2005-05-23 KW - Glaspulver KW - Glasmatrix-Komposit KW - Sintern KW - Kristallisation PY - 2005 SN - 3-921089-43-3 SP - 7 Seiten PB - Deutsche Glastechnische Gesellschaft CY - Offenbach AN - OPUS4-10377 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Eberstein, Markus A1 - Thiel, A. A1 - Reinsch, Stefan A1 - Müller, Ralf A1 - Deubener, J. A1 - Schiller, Wolfgang Arno T1 - Sinterkinetik von Glasmatrix-Kompositen mit reaktiver Dispersphase T2 - 80. Glastechnische Tagung CY - Dresden, Deutschland DA - 2006-06-12 PY - 2006 SN - 3-921089-46-8 SP - 4 Seiten PB - Verl. d. Dt. Glastechn. Ges. CY - Offenbach AN - OPUS4-14046 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reinsch, Stefan A1 - Meng, S. A1 - Eberstein, Markus A1 - Thiel, A. A1 - Müller, Ralf A1 - Deubener, J. T1 - Partial Solution of Dispersed alpha-Al2O3-Particles in Alumoborosilicate Glass T2 - 81. Glastechnische Tagung CY - Aachen, Deutschland DA - 2007-06-04 KW - Glasmatrixkomposite KW - Lösung KW - Sintern PY - 2007 SN - 978-3-921089-52-1 IS - CD-ROM SP - 1 EP - 5 PB - Deutsche Glastechnische Gesellschaft CY - Offenbach AN - OPUS4-16108 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaber, Martin A1 - Müller, Ralf A1 - Brzezinka, Klaus-Werner A1 - Peuker, Christel A1 - Langer, A. T1 - Analyse von Wasserstoff in Quarzglas T2 - 76. Glastechnische Tagung CY - Bad Soden, Deutschland DA - 2002-05-27 PY - 2002 SP - 242 EP - 245 PB - DGG, Deutsche Glastechnische Gesellschaft e.V. CY - Frankfurt/M. AN - OPUS4-1636 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberstein, Markus A1 - Müller, Ralf A1 - Reinsch, Stefan A1 - Rabe, Torsten A1 - Schiller, Wolfgang Arno A1 - Thiel, A. A1 - Deubener, J. T1 - Kinetic Modeling of LTCC-Shrinkage T2 - 3rd International Conference and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technologies (CICMT 2007) CY - Denver, CO, USA DA - 2007-04-23 KW - LTCC KW - Glass matrix composites KW - Inclusions KW - Sintering kinetics KW - Modeling PY - 2007 SP - 1 EP - 8 PB - American Ceramic Soc. CY - Denver AN - OPUS4-14948 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eberstein, Markus A1 - Müller, Ralf A1 - Reinsch, Stefan A1 - Rabe, Torsten A1 - Schiller, Wolfgang Arno A1 - Thiel, A. A1 - Deubener, J. T1 - Kinetic Modeling of LTCC Shrinkage: Effect of Alumina Content N2 - We studied sintering of LTCC-type glass matrix composites (GMCs) consisting of small glass and alumina particles of equal size. Primarily, crystals act as rigid inclusions, decelerating the densification rate. In later stages, they also dissolve, partially increasing the viscosity. Release of alumina finally induces crystallization of alumosilicates, which enables post-firing stability. To study both effects, two model GMCs were prepared: an α-Al2O3 + barium alumoborosilicate glass (BABS)–GMC, which shows neither significant dissolution nor crystallization, and an α-Al2O3 + calcium alumoborosilicate glass (CABS)–GMC, which dissolves readily and promotes crystallization. The kinetics of shrinkage for both GMC were modeled by utilizing Frenkel theory for the early stage and Mackenzie–Shuttleworth theory for the late stage, assuming that sintering is superimposed by the weighted contributions of triparticle glass–crystal clusters, their random occurrence (ideal mixing), and a shrinkage rate controlled by the GMC effective viscosity. In agreement with modeling, the experimental results showed that the shrinkage rate of BABS–GMC decreases progressively for crystal volume fractions Φ > 0.15. The attainable shrinkage is reduced by up to 8% for Φ = 0.45. For the CABS–GMC with Φ = 0.25, a reduction of Φ to 0.20 was evident due to partial α-Al2O3 dissolution. This effect was found able to increase the sintering temperature by ~50–60 K. KW - LTCC KW - Glas Matrix Composites KW - Inclusions KW - Sintering Kinetics KW - Modeling PY - 2007 SN - 1551-4897 VL - 4 IS - 4 SP - 173 EP - 180 CY - Washington, DC AN - OPUS4-16506 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reinsch, Stefan A1 - Müller, Ralf A1 - Eberstein, Markus A1 - Deubener, J. A1 - Thiel, A. A1 - Schiller, Wolfgang Arno ED - J.G. Heinrich, ED - C.G. Aneziris, T1 - Effect of dispersed Al2O3 particles on sintering of glass matrix composites T2 - 10th International Conference of the European Ceramic Society CY - Berlin DA - 2007-06-17 KW - LTCC KW - Glass matrix composites KW - Inclusions KW - Sintering kinetics KW - Modelling PY - 2007 SN - 3-87264-022-4 SP - 290 EP - 295 PB - Göller CY - Baden-Baden AN - OPUS4-17445 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rack, A. A1 - Zabler, S. A1 - Riesemeier, Heinrich A1 - Weidemann, Gerd A1 - Müller, Bernd R. A1 - Helfen, L. A1 - Stiller, M. A1 - Knabe, C. A1 - Goebbels, Jürgen A1 - Banhart, J. T1 - Nondestructive 3D insights into foamy metals and bioregenerative ceramics KW - X-ray Computed Tomography KW - Metal foams KW - Bioregenerative ceramics PY - 2008 UR - http://www.helmholtz-berlin.de/media/media/oea/web/pr_webseite/druckschriften/infos/bessy/highlights2007.pdf#page=34 SN - 1611-6127 SP - 34 EP - 35 PB - Berliner Elektronenspeicherring-Gesellschaft für Synchrotronstrahlung CY - Berlin AN - OPUS4-17538 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, A. T1 - Secondary building materials from construction and demolition waste: environmental benefits and costs T2 - Rilem Conference "Progress of recycling in the built environment" CY - Sao Paulo, Brazil DA - 2015-08-03 PY - 2015 AN - OPUS4-34934 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Weimann, Karin A1 - Matyschik, Jan A1 - Adam, Christian A1 - Schulz, T. A1 - Linß, E. A1 - Müller, A. T1 - Optimierung des Rückbaus/Abbruchs von Gebäuden zur Rückgewinnung und Aufbereitung von Baustoffen unter Schadstoffentfrachtung (insbes. Sulfat) des RCMaterials sowie ökobilanzieller Vergleich von Primär- und Sekundärrohstoffeinsatz inkl. Wiederverwertung N2 - Aufgrund der großen Massenströme ist das Recycling von Baurestmassen von besonderer Bedeutung für die Schonung von natürlichen Ressourcen. Eine wichtige Voraussetzung für ein hochwertiges Recycling, wie z.B. eine Wiederverwertung von aufbereitetem Bauschutt/Altbeton als rezyklierte Gesteinskörnung im Hochbau, ist die Einhaltung von Grenzwerten für Stör- und Schadstoffe. Dabei steht der Sulfatgehalt im Eluat von Bauschutt besonders im Fokus. In der vorliegenden Studie wird untersucht, wie durch die Optimierung von Abbrucharbeiten und Bauschuttaufbereitung hochwertige Gesteinskörnungen aus Altbeton gewonnen werden können. Anhand von Literatur- und Datenrecherchen werden zunächst Sulfatquellen in Gebäuden sowie verfügbare Abbruch- und Aufbereitungstechniken zusammengestellt. Am Beispiel von unterschiedlichen Gebäudetypen werden Szenarien für selektiven und nicht selektiven Abbruch (Schwerpunkt: Sulfatentfachtung) in Hinblick auf ihre Umweltwirkungen ökobilanziell bewertet. Ergänzt werden diese Bewertungen durch Untersuchungen an realen Bauschuttmaterialien und Abbruchprojekten. Auf dieser Basis werden Handlungsempfehlungen für die Gewinnung von hochwertigen RC-Gesteinskörnungen erarbeitet und diskutiert.----------------------------------------------------------------------------------------- Due to the large-scale mass flow of construction and demolition wastes, the recycling of those residues is of particular importance for the conservation of natural resources. An important requirement for recycling on a high level, like the reuse of crushed concrete as recycled concrete aggregate, is the observation of limits for hazardous substances and impurities. This study is focusing on the reduction of sulphates in the eluate of crushed concrete. An investigation of possibilities to optimize demolition and dismantling as well as treatment of crushed concrete with the objective of gaining recycled concrete aggregates of high quality. Based on a literature research and a data review the origins of sulfates in buildings and also the availability of techniques for demolition and treatment of crushed concrete are listed and evaluated. Using the examples of different building types scenarios for selective dismantling and non-selective demolition (focused on reducing suphates) are evaluated in terms of affecting the environment. In addition samples from real demolition construction sites and plants for treatment of construction rubble were investigated. Based on these results recommendations for the production of high quality recycled concrete aggregates are worked out. KW - Bauschuttaufbereitung KW - Abbruch KW - Ökobilanzielle Bewertung KW - RC-Beton KW - Gips KW - Abbruchverfahren KW - Hochwertiges Recycling KW - Ökobilanzielle Betrachtung KW - Sulfatentfachtung KW - Demolition/dismantling KW - Treatment of C&D wastes KW - High-grade recycling KW - Environmental LCA KW - Reduction of sulphates PY - 2012 UR - http://www.umweltbundesamt.de/publikationen/optimierung-des-rueckbausabbaus-von-gebaeuden-zur SN - 1862-4804 SP - 1 EP - 227 PB - Umweltbundesamt CY - Dessau-Roßlau AN - OPUS4-26999 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malaga, Katarina A1 - Lundahl, A. A1 - Müller, Urs T1 - Use of technical textiles to modify concrete surfaces N2 - To keep concrete building façades clean from dirt and algal growth intense maintenance is needed. A designaspiration for advanced building materials is that they should be easily cleanable when used in façades. Theapplication of technical textiles as a building material component has mainly focused on their use as a rein-forcement material for concrete or mortar. The goal of this study was to modify the concrete surface by cast-ing concrete in a textile mould, giving the surface a fine structured imprint, that subsequently was impreg-nated with hydrophobic agents to achieve the self-cleaning Lotus effect.The analysis of the surface properties was performed by means of contact angle measurements, laser scan-ning confocal microscopy and optical microscopy. Three different textiles, including one with nano-engi-neered surface, were used for moulding and imprinting. The results demonstrated significant variations inhydrophobicity and oleophobicity between the samples. Micro- and nano-structuring of the surface did notresult in hydrophobicity by itself; therefore a hydrophobic treatment was necessary to achieve water- andoleophobicity. After this treatment all samples became hydrophobic but not necessarily oleophobic. Onlysingle samples reached a superhydrophobic eff KW - Concrete KW - Textile imprint KW - Nano KW - Hydrophobicity KW - Oleophobicity KW - Beton KW - Textilien KW - Oberflächen KW - Wasserabweisend PY - 2012 SN - 1864-7251 SN - 0947-4498 VL - 18 IS - 1 SP - 23 EP - 30 PB - Aedificatio Publ. CY - Freiburg AN - OPUS4-25635 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kupsch, Andreas A1 - Müller, Bernd R. A1 - Hentschel, M. P. A1 - Lange, A. A1 - Trappe, Volker A1 - Laquai, René A1 - Shashev, Yury A1 - Evsevleev, Sergei A1 - Bruno, Giovanni T1 - Progress survey of X-Ray refraction imaging techniques N2 - The most substantial innovations in radiographic imaging techniques of the last two decades aim at enhanced image contrast of weakly absorbing micro and nano structures by taking advantage of X-ray refraction effects occurring at outer and inner surfaces. The applications range from fibre reinforced plastics to biological tissues. These techniques comprise, among others, X-ray refraction topography, diffraction enhanced imaging, phase contrast imaging, Talbot-Lau grating interferometry, and refraction enhanced imaging. They all make use of selective beam deflections up to a few minutes of arc: the X-ray refraction effect. In contrast to diffraction, this type of interaction has a 100 % scattering cross section, as shown experimentally. Since X-ray refraction is very sensitive to the orientation of interfaces, it is additionally a tool to detect, e.g., fibre or pore orientation. If the detector resolution exceeds the size of (small) individual features, one detects the integral information (of inner surfaces) within the gauge volume. We describe the above-mentioned techniques, and show their experimental implementation in the lab and at a synchrotron source. We also show strategies for data processing and quantitative analysis. T2 - 19th World Conference on Non-Destructive Testing CY - Munich, Germany DA - 13.06.2016 KW - grating KW - topography KW - refraction KW - X-ray PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-366194 SN - 978-3-940283-78-8 VL - 2016/158 SP - We.3.B.2, 1 EP - 9 AN - OPUS4-36619 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Alrwashdeh, S. S. A1 - Markötter, Henning A1 - Haußmann, J. A1 - Hilger, A. A1 - Klages, M. A1 - Müller, Bernd R. A1 - Kupsch, Andreas A1 - Riesemeier, Heinrich A1 - Scholta, J. A1 - Manke, I. T1 - Investigation of water transport in newly developed micro porous layers for polymer electrolyte membrane fuel cells N2 - In this investigation, synchrotron X-ray imaging was used to investigate the water distribution inside newly developed gas diffusion media in polymer electrolyte membrane fuel cells. In-situ radiography was used to reveal the relationship between the structure of the microporous layer (MPL) and the water flow in a newly developed MPL equipped with randomly arranged holes. A strong influence of these holes on the overall water transport was found. This contribution provides a brief overview to some of our recent activities on this research field. KW - Polymer electrolyte membrane fuel cell KW - Microporous layer KW - Water distribution KW - Radiography KW - Synchrotron X-ray imaging PY - 2017 DO - https://doi.org/10.9729/AM.2017.47.3.101 SN - 2287-4445 SN - 2287-5123 VL - 47 IS - 3 SP - 101 EP - 104 AN - OPUS4-43356 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Horn, Wolfgang A1 - Jann, Oliver A1 - Brosig, L. A1 - Müller, B. A1 - Mertes, A. A1 - de Lima Vasconcelos, S. T1 - Emissions- und geruchsarme Bauprodukte für energieeffiziente Gebäude – Entwicklung von Anforderungen und Konzepten für den Blauen Engel aus Klimaschutzsicht N2 - Menschen, die in der gemäßigten Klimazone leben, verbringen bis zu 90% ihres Lebens in Innenräumen. Deshalb hat das Innenraumklima eine sehr große Bedeutung für deren Wohlergehen, Gesundheit und Leistungsfähigkeit. In Deutschland wird ca. 40% der eingesetzten Primärenergie für das Heizen, Kühlen und Klimatisieren der Innenräume verwendet. Das Forschungsvorhaben hat eine Laufzeit vom Oktober 2013 bis März 2017. Es wird in Kooperation mit der Bundesanstalt für Materialforschung und –prüfung (BAM) und der Hochschule für Technik und Wirtschaft Berlin (HTW Berlin) durchgeführt. Die HTW Berlin koordiniert das Projekt. Die Rheinisch-Westfälische Technische Hochschule Aachen (RWTH) wird teilweise über einen Auftrag in das Projekt integriert. Ziel des Projektes ist es Baustoffe auf ihre Geruchsemissionen zu untersuchen, um Bauprodukte mit niedrigen Emissionen und Gerüchen identifizieren zu können. Den Verbraucherinnen und Verbrauchern wird somit die Möglichkeit gegeben emissions- und geruchsarme Baustoffe zu wählen. Die Aufgabenstellung des Projektes ist nachfolgend aufgeführt: Arbeitspaket 1: Geruchsmessung bei Produkten mit dem Blauen Engel (siehe Kapitel 4 und 5); Arbeitspaket 2: Untersuchung von Vergleichsmaßstäben (siehe Kapitel 6); Arbeitspaket 3: Untersuchung der Linearität der Acetonskala (siehe Kapitel 7); Arbeitspaket 4: Erstellung einer Produktdatenbank (siehe Kapitel 8). Die Geruchsuntersuchung ist in den Vergabekriterien für den „Blauen Engel“ für textile Bodenbeläge (RAL UZ-128) eingebunden worden. Aus den weiteren Untersuchungen sind für die Normung wichtige Erkenntnisse erarbeitet worden. KW - VOC Emissionen KW - Geruch KW - Bewertung KW - Innenraumluftqualtität KW - Bodenbeläge PY - 2019 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-487223 UR - https://www.umweltbundesamt.de/publikationen/emissions-geruchsarme-bauprodukte-fuer UR - https://www.umweltbundesamt.de/sites/default/files/medien/1410/publikationen/2019-08-20-texte_92-2019_emissionsarme-bauprodukte.pdf SN - 1862-4804 VL - 92 SP - 1 EP - 106 PB - Umweltbundesamt CY - Dessau-Roßlau AN - OPUS4-48722 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin A1 - Müller, A. T1 - Baustoffeigenschaften von nass aufbereiteten Betonbrechsanden T2 - 16. Internationale Baustofftagung CY - Weimar, Germany DA - 2006-09-20 PY - 2006 AN - OPUS4-13695 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weimann, Karin A1 - Müller, A. A1 - Linß, E. A1 - Schulz, T. A1 - Adamczyk, Burkart ED - Jones, M.R. ED - Newlands, M.D. ED - Halliday, J.E. ED - Csetenyi, L.J. ED - Li, Z. ED - McCarthy, M.J. ED - Dyer, T.D. T1 - Reducing sulphates in crushed concrete: improving the building material properties of recycled concrete aggregates N2 - The material properties of recycled concrete aggregates (RCA) are correlated to the sorting accuracy of the former demolition waste. Impurities like wood, clay bricks or gypsum can lead to inferior building material properties. Harmful substances like heavy metals or organic pollutants should be minimised as well. Hence the non-concrete materials have to be separated from the concrete material stream. This can be done during the demolition process by using selective dismantling techniques. Alternatively a variety sorting and classifying techniques to purify the crushed concrete can be utilized. A research project, funded by the Federal Ministry for the Environment, Nature Conservation and Nuclear Safety, investigated the possibilities of gaining recycled concrete aggregates of a high quality for the reuse in the production of concrete. The work focuses especially on how gypsum respectively sulphates in the crushed concrete can be reduced. Sulphates can impair the setting behaviour of concrete and also damage set concrete by causing expansion. Therefore the content of sulphates in RCA is restricted by guidelines and standards in Germany. Generally, gypsum in construction waste originates from interior fittings like gypsum walls, floor screeds, plaster boards and also plaster. Most of these materials can be reconstructed using selective dismantling techniques. This can be achieved either by manual labour or by using mechanical equipment e.g. to remove floor screeds by milling. Depending on the specific deconstruction site it can be more effective and/or more environmentally compatible to remove sulphates by treating the crushed concrete. Applicable treatments for sulphate reduction include dry processes like manual sorting of gypsum wall blocks as well as wet treatments e.g. jigging. In addition this research project an environmental performance evaluation was undertaken to assess different techniques for reducing sulphates in recycled concrete aggregates. T2 - Tagung 'Cocrete in the low carbon era' CY - Dundee, Great Britain DA - 09.07.2012 KW - Building material properties KW - Environmental performance evaluation KW - Gypsum KW - Recycled concrete aggregates KW - Sulphates PY - 2012 SN - 978-0-9573263-0-9 SP - 687 EP - 698 AN - OPUS4-26211 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, A. A1 - Weimann, Karin T1 - Leistungsfähigkeit der Setztechnik KW - Aufbereitungstechnik KW - Setztechnik KW - Baustoffe KW - Recycling KW - Beton KW - Gips PY - 2010 SN - 0934-683X SN - 0178-1510 VL - 26 IS - 2 SP - 20 EP - 27 PB - Giesel-Verl. CY - Isernhagen AN - OPUS4-22946 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weimann, Karin A1 - Müller, A. ED - Stark, J. T1 - Baustoffeigenschaften von nass aufbereiteten Betonbrechsanden T2 - 16. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2006-09-20 PY - 2006 SN - 3-00-018263-2 VL - 2 SP - 2-1365 - 2-1372 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-18798 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weimann, Karin A1 - Müller, A. ED - Ravindra K. Dhir, ED - Peter C. Hewlett, ED - Laslo J. Csetenyi, ED - Moray D. Newlands, T1 - Effects of wet processed crushed concrete fines as secondary aggregates in building materials T2 - International Conference "Role for Concrete in Global Development" CY - Dundee, Scotland, UK DA - 2008-07-08 KW - Recycling KW - Beton KW - Bauschutt KW - Recycled aggregates KW - Crushed concrete fines KW - Wet treatment KW - Jig KW - Building material properties PY - 2008 SN - 978-1-84806-037-1 IS - EP86 SP - 499 EP - 510 PB - IHS BRE Press AN - OPUS4-18802 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Enderlein, M. A1 - Kuna, M. A1 - Ricoeur, A. A1 - Baer, Wolfram A1 - Müller, Karsten A1 - Klein, K. A1 - Winkler, H. P. T1 - Numerische Analyse des Stoßbiegeversuchs zur Ermittlung der dynamischen Bruchzähigkeit KW - Bruchmechanik KW - Finite-Elemente-Methode KW - Dynamisches J-Integral KW - 3-Punkt-Biege-Großprobe PY - 2003 SN - 0943-3473 SN - 1616-4687 IS - 235 SP - 251 EP - 260 PB - DVM CY - Berlin AN - OPUS4-32709 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zoёga, Andreas A1 - Kurz, J. H. A1 - Oelschlägel, T. A1 - Rohrschneider, A. A1 - Müller, Christina A1 - Pavlovic, Mato A1 - Hintze, H. A1 - Kanzler, D. T1 - Investigations to introduce the probability of detection method for ultrasonic inspection of hollow axles at Deutsche Bahn N2 - Currently at Deutsche Bahn (DB) ultrasonic inspections in maintenance procedures for wheelset axles with a bore hole are, to the greatest possible extent, carried out using automated ultrasonic inspection system. Although the acceptance levels are in accordance with DIN 27201 part 7, the testing results have shown in recent years that in the case of true indications, the effective defect sizes were far below the level of acceptance. Due to this experience it can be assumed that the automated ultrasonic inspection systems are testing substantially more sensitively than required. This increased sensitivity leads to an increase in false indications, generally resulting in the unnecessary demounting of wheelsets. In Research cooperation between Federal Institute for Materials Research and Testing (BAM) and DB the effective flaw detection sensitivity of existing automated ultrasonic inspection system will be determined and the true/false indication ratio optimised. Through systematic investigations with the Probability of Detection method on the existing automated ultrasonic inspection system the results could be directly applied to the optimisation of existing ultrasonic inspections of wheelset axles with a bore hole in maintenance procedures and the level of reliability can be considerably increased. T2 - 19th World Conference on Non-Destructive Testing CY - München, Germany DA - 13.06.2016 KW - NDT KW - Reliability KW - POD KW - Railway KW - Axles KW - UT PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-375813 UR - http://www.ndt.net/article/wcndt2016/papers/we2g4.pdf SP - id 19515, 1 EP - 8 AN - OPUS4-37581 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weimann, Karin A1 - Müller, A. ED - Vázquez, E. T1 - Properties of building materials gained from wet-processed crushed concrete fines N2 - Although a large proportion of building rubble is already being recycled, most recycling applications, e.g. in roadbed foundations, can be considered as downcycling. This study is aimed at improving the material properties of crushed concrete fines by wet treatment, using a jig for density separation. Trial runs in a pilot plant with a flow rate between 0.45 and 0.65 t/h were conducted with two different materials (A and B). The materials were separated into heavy fraction, light fraction and finest fraction. Laboratory tests and tests for building materials were carried out on the output fractions and on the input materials. Laboratory tests showed an improvement of material properties such as loss by washing and content of binder matrix as well as water absorption for both materials A and B. The tests for building materials on mortar specimens showed that strength properties of specimens containing crushed concrete fines (heavy fraction) of type A were improved by wet treatment, but not for test specimens of material type B. Strength tests on concrete showed that a replacement of natural aggregates with wet-treated concrete fines up to 50 % had little effect on compressive strength, while untreated material exhibited a clearly lower compressive strength. T2 - RILEM 04 CY - Barcelona, Spain DA - 2004-11-08 KW - Crushed concrete fines KW - Wet treatment KW - Jig KW - Mortar KW - Recycled aggregates KW - Material properties PY - 2004 UR - http://congress.cimne.upc.es/rilem04/admin/Files/FilePaper/p216.pdf SN - 2-912143-52-7 N1 - Serientitel: RILEM proceedings – Series title: RILEM proceedings IS - 40 SP - 133 EP - 141 PB - RILEM Publ. CY - Bagneux AN - OPUS4-5320 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Falkenhagen, Jana A1 - Much, Helmut A1 - Stauf, W. A1 - Müller, A. H. E. T1 - Characterization of di- and triblock copolymers using coupled chromatogreaphic methods PY - 1999 SN - 0032-3934 VL - 40 IS - 2 SP - 984 EP - 985 PB - American Chemical Society CY - Newark, NJ AN - OPUS4-2183 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herbst, Tristan A1 - Rübner, Katrin A1 - Müller, A. A1 - Seidemann, M. T1 - Verwertung kieselsäurehaltiger Filterrückstände in mineralischen Baustoffen N2 - Kieselsäurehaltige Filterrückstände (FR) fallen als feuchter Filterkuchen bei der Aufbereitung von Abwässern der chemischen Industrie an. Die Rückstände werden zurzeit kostenpflichtig auf Deponien entsorgt oder zur Tagebaufüllung eingesetzt. Jedoch besitzen die Filterrückstände aufgrund ihrer chemisch-mineralogischen Zusammensetzung und ihrer physikalischen Eigenschaften, insbesondere ihres hohen Gehalts an amorpher Kieselsäure und ihrerhohen spezifischen Oberfläche, sehr . gute materialtechnische Voraussetzungen zur Wiederverwertung in mineralischen Baustoffen. Im Verbundforschungsvorhaben „NanoKiesel - Nanoskaliger Kieselsäureschlamm“ wurden Technologien zur FR-Verwertung als puzzolanischer Bestandteil in zementhaltigen Bindemitteln und alsRohstoffkomponente für Wandbaustoffe entwickelt. Hauptziel war dabei die Verbesserung der Werkstoffeigenschaften, wie Festigkeit und Rohdichte. Bei einer Beurteilung des möglichen Einsatzpotenzials der Filterrückstände spielen neben der materialtechnischen Eignung auch ökologische und ökonomische Fragestellungen eine wichtige Rolle. Nur eine ganzheitliche Nachhaltigkeitsbetrachtung der technischen, ökologischen und ökonomischen Aspekte ermöglicht Aussagen über den optimalen Verwertungsweg der Filterrückstände. Im Beitrag wird über die Ergebnisse der Nachhaltigkeitsbetrachtungen für die verschiedenen Anwendungen berichtet. T2 - GDCh-Tagung Bauchemie 2012 CY - Dübendorf, Switzerland DA - 11.10.2012 PY - 2012 SN - 978-3-936028-72-0 N1 - Serientitel: GDCh-Monographien – Series title: GDCh-Monographien VL - 45 SP - 149 CY - Frankfurt/M. AN - OPUS4-27600 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herrmann, Ralf A1 - Hille, Falk A1 - Said, Samir A1 - Sterthaus, Jens A1 - Müller, Karsten A1 - Quercetti, Thomas A1 - Wille, Frank A1 - Paffenholz, J.-A. A1 - Baeßler, Matthias ED - Papadrakakis, M. ED - Fragiadakis, M. ED - Papadimitriou, C. T1 - Implementing a Structural Health Monitoring system using digital models of the BAM large drop test facility in Horstwalde N2 - At the Bundesanstalt für Materialforschung und -prüfung (BAM) full scale specimens for nuclear transport and storage containers (casks) are tested for their structural integrity in a series of drop tests on the Test Site Technical Safety in Horstwalde, 50 km south of Berlin. These drop tests cause a major stress not only on the casks, but also on the steel tower structure of the test facility, itself. The load pattern makes the structure very interesting for detailed investigation. The focus of the monitoring lies on the bolted joints of the flange connections that are a typical connection for cylindrical elements if welding is technical or economical unfavorable. The definition of the monitoring takes was done by investigating the existing documents and inspection results accompanied by building an initial digital representation of the structure, consisting of two finite element (FE) models and a geometrical 3D point cloud representation. As a first step the structures behavior during static and dynamic loading was analyzed using measurement data and an updated numerical FE Model. The idea behind is to use models for a digital planning and operation/evaluation of the structural health monitoring. A static FE simulation and a dynamic FE simulation are generated, to investigate how the structure behaves under the load conditions. T2 - XI International Conference on Structural Dynamics (EuroDyn 2020) CY - Online meeting DA - 23.11.2020 KW - Structural Health Monitoring KW - Drop Tests KW - System Identification KW - Digital Models KW - BIM PY - 2020 UR - https://generalconferencefiles.s3-eu-west-1.amazonaws.com/eurodyn_2020_ebook_procedings_vol1.pdf SN - 978-618-85072-0-3 VL - 1 SP - 1293 EP - 1304 PB - Institute of Structural Analysis and Antiseismic Research CY - Athen AN - OPUS4-51592 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Bernd R. A1 - Lange, Axel A1 - Harwardt, Michael A1 - Hentschel, Manfred P. A1 - Hamm, B. A1 - Rogalla, P. A1 - Diederichs, G. A1 - Issever, A.S. T1 - First Synchrotron Refraction CT of Cartilage KW - X-ray Refraction KW - Computed Tomography KW - DEI KW - Cartilage PY - 2008 UR - http://www.helmholtz-berlin.de/media/media/oea/web/pr_webseite/druckschriften/berichte/bessy/annual_report_2007-v2.pdf#page=292 SN - 0179-4159 SP - 292 EP - 296 PB - Berliner Elektronenspeicherring-Gesellschaft für Synchrotronstrahlung CY - Berlin AN - OPUS4-17661 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Bernd R. A1 - Soares, A.P. A1 - Kupsch, Andreas A1 - Baum, D. A1 - Hesse, B. A1 - Zaslansky, P. T1 - Untersuchung der Integrität von glasfaserverstärkten Zahnstiften mittels Synchrotron-Röntgenrefraktion N2 - Die Integrität der Verstärkungsfasern in Komposit-Zahnstiften ist entscheidend für die Biegefestigkeit und die langfristige Haftung am Zement in den Wurzelkanälen. Es wurde vermutet, dass die Integrität von glasfaserverstärkten Zahnstiften durch das Beschleifen während der zahnmedizinischen Behandlung beeinträchtigt wird. Eine Beschädigung der Fasern führt zu einer erheblichen strukturellen Schwächung über den gesamten Stiftdurchmesser. Glasfragmente, die durch den Kontakt mit dem Zahnbohrer entstehen, können sich vom Stift lösen und die Haftfähigkeit erheblich verringern. Mit Hilfe hochauflösender Synchrotron-Röntgen-Refraktions-Radiographie (SXRR) konnte das Ausmaß der Schäden zuverlässig identifiziert und charakterisiert werden. Dazu wurden die Glasfaserstifte sowohl im Herstellungszustand als auch nach der Bearbeitung mit einem Diamantbohrer untersucht. Die Datensätze wurden zur Visualisierung und Quantifizierung der morphologischen Charakteristika intakter und durch das Beschleifen beschädigter Regionen analysiert. Sie zeigen Schäden im bearbeiteten Bereich (z. B. Brüche, Splitter und Risse) sowie herstellungsbedingte Inhomogenitäten der Fasern mit einer signifikanten Zunahme der inneren Oberflächen in Probenregionen, die durch das Beschleifen beschädigt wurden. T2 - DGZfP Jahrestagung 2022 CY - Kassel, Germany DA - 23.05.2022 KW - Röntgen-Refraktion KW - Verbundwerkstoffe KW - Zahnstifte PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-549231 SP - 1 EP - 7 AN - OPUS4-54923 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -