TY - CONF A1 - Lu, Xin T1 - Introduction to group 8.6 N2 - A brief introduction of group 8.6 and the research work on the application of fiber sensing. T2 - DIU Besuch CY - Berlin, Germany DA - 05.05.2023 KW - Structural health monitoring KW - Distributed fiber sensing KW - Distributed acoustic sensing KW - Practical application PY - 2023 AN - OPUS4-57430 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Krebber, Katerina T1 - Configuration simplification and data reduction in a DAS system for monitoring large infrastructures N2 - The distributed acoustic sensor based on an imbalanced Mach-Zehnder interferometer with a 3×3 coupler is simplified by using a balanced detector instead of three identical photodetectors. The obtained data is reduced by two third accordingly. T2 - Optica Sensing Congress 2024 CY - Toulouse, France DA - 15.07.2024 KW - Data reduction KW - Distributed fiber optic sensing KW - System simplification PY - 2024 SP - 1 EP - 2 PB - Optica CY - Washington D.C., USA AN - OPUS4-60840 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin T1 - Configuration simplification and data reduction in a DAS system for monitoring large infrastructures N2 - The distributed acoustic sensor based on an imbalanced Mach-Zehnder interferometer with a 3×3 coupler is simplified by using a balanced detector instead of three identical photodetectors. The obtained data is reduced by two third accordingly. T2 - Optica Sensing Congress 2024 CY - Toulouse, France DA - 15.07.2024 KW - Distributed fiber sensing KW - System simplification KW - Data reduction PY - 2024 AN - OPUS4-60841 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hicke, Konstantin A1 - Lu, Xin A1 - Chruscicki, Sebastian A1 - Krebber, Katerina T1 - Measurement of Slowly Changing and Quasi-Static Strain Signals for Ground Motion Monitoring Applications using Distributed Acoustic Sensing N2 - The suitability of wavelength-scanning COTDR for distributed dynamic strain sensing (DAS) along buried fiber cables for long-term geotechnical monitoring applications is demonstrated by experiments showing the method’s capability to demodulate slowly varying and quasi-static signals. T2 - Optica Sensing Congress 2024 CY - Toulouse, France DA - 15.07.2024 KW - Ground motion KW - Ground movement monitoring KW - Distributed fiber optic sensing KW - Quasi-static signals KW - Geomonitoring PY - 2024 SP - 1 EP - 2 PB - Optica CY - Washington D.C., USA AN - OPUS4-60816 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lu, Xin A1 - Krebber, Katerina T1 - Suppression of Rayleigh fading induced errors in φOTDR by different pulse widths for improving the reliability of civil infrastructure monitoring N2 - Rayleigh fading is a widely observed phenomenon in the many fields, such as wireless communication and optical imaging. It is also the main factor limiting the performance of the phase-sensitive optical time domain reflectometry (φOTDR). The low SNR at the fading points results in a large measurement error, severely affecting the reliability of civil infrastructure monitoring. The proposed method involves changing the pulse width during measurements to suppress the impact of fading. Experimental result shows that the number of fading points is greatly reduced by ∼ 96 % and the measurement error is reduced by more than 5 times. Unlike existing methods, this approach requires no hardware modifications, making it applicable to almost all current phase-based φOTDR systems. The versatility and effectiveness of this method make it an excellent candidate for infrastructure monitoring and related fields. KW - Distributed fiber sensing KW - Optical fiber sensing KW - Phase-sensitive optical time domain reflectometry KW - Infrastructure monitoring KW - Rayleigh fading PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-614208 DO - https://doi.org/10.1016/j.optlastec.2024.111927 SN - 1879-2545 VL - 181 SP - 1 EP - 9 PB - Elsevier Ltd. AN - OPUS4-61420 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Hicke, Konstantin A1 - Krebber, Katerina T1 - Distributed fiber optic sensing for monitoring of underground facilities N2 - Distributed fiber optic sensing (DFOS) technique is a promising and robust non-destructive testing tool that can seamlessly acquire environmental conditions over large scales. Therefore, it has found extensive applications in structural health monitoring. Its appeal for monitoring underground facilities lies in the intrinsic properties of the optical fiber, such as immunity to magnetic interference, small size, chemical inertia, etc. This paper provides a concise overview of DFOS applications in underground facility monitoring. Following a brief introduction to the working principle of the DFOS technique, various examples are provided to demonstrate how distributed fiber sensors contribute to monitoring underground facilities. The paper presents unpublished field test results with an emphasis in the energy sector, including monitoring gas storage facilities, geothermal reservoir exploration, and ground movement detection. Furthermore, the paper identifies several directions for enhancing the DFOS system. T2 - SPIE Photonics Europe CY - Strasbourg, France DA - 07.04.2024 KW - Underground gas storage KW - Distributed fiber sensing KW - Geothermal borehole KW - Ground movement KW - Leakage detection KW - Structure health monitoring PY - 2024 AN - OPUS4-60146 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Hicke, Konstantin A1 - Krebber, Katerina T1 - Distributed fiber optic sensing for monitoring of underground facilities N2 - Distributed fiber optic sensing (DFOS) technique is a promising and robust non-destructive testing tool that can seamlessly acquire environmental conditions over large scales. Therefore, it has found extensive applications in structural health monitoring. Its appeal for monitoring underground facilities lies in the intrinsic properties of the optical fiber, such as immunity to magnetic interference, small size, chemical inertia, etc. This paper provides a concise overview of DFOS applications in underground facility monitoring. Following a brief introduction to the workingbnprinciple of the DFOS technique, various examples are provided to demonstrate how distributed fiber sensors contribute to monitoring underground facilities. The paper presents unpublished field test results with an emphasis in the energy sector, including monitoring gas storage facilities, geothermal reservoir exploration, and ground movement detection. Furthermore, the paper identifies several directions for enhancing the DFOS system. T2 - SPIE Photonics Europe CY - Strasbourg, France DA - 07.04.2024 KW - Structure health monitoring KW - Geothermal borehole KW - Distributed fiber optic sensing KW - Ground movement KW - Leakage detection PY - 2024 DO - https://doi.org/10.1117/12.3023571 SN - 0277-786X VL - 13001 SP - 1 EP - 10 PB - SPIE AN - OPUS4-60384 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Christensen, J. B. A1 - Jørgensen, A. A. A1 - Vandborg, M. H. A1 - Thomas, P. J. A1 - Lu, Xin A1 - Failleau, G. A1 - Eisermann, R. A1 - Grüner-Nielsen, L. A1 - Balslev-Harder, D. A1 - Lassen, M. A1 - Krenek, S. T1 - Fiber-artefact methodology and calibration framework for Brillouin-based fiber sensing N2 - We propose, and demonstrate, the use of a fiber-optical measurement artefact as a metrological tool for traceable distance calibration of distributed optical fiber sensors. The constructed fiber artefact consists of a lead-in fiber coupled to a fiber loop using a 3-dB coupler and is used to calibrate both a home-build Brillouin-OTDR setup and a custom version of a commercial Brillouin-OTDR interrogator build for distributed temperature sensing. For both interrogators, we demonstrate distance calibrations with 1-meter uncertainty (k=1) in the offset length and 0.1 % (1 m/km) uncertainty (k = 1) in the distance scale factor. In addition, it is shown that the fiber artefact can be used to assess undesired distance-dependent measurement biases. KW - Distributed temperature sensing KW - Metrology KW - Distributed optical fiber sensing KW - Brillouin optical time-domain reflectrometry PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-618853 DO - https://doi.org/10.1364/OE.544659 SN - 1094-4087 VL - 32 IS - 26 SP - 45483 EP - 45493 PB - Optica Publishing Group AN - OPUS4-61885 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin T1 - Progress review N2 - We report on the progress on calibration and characterization of distributed temperature sensing systems as a part of the European INFOTherm project. The most research results were achieved in the framework of the Work Package 2. T2 - Midterm meeting of INFOTherm project CY - Copenhagen, Denmark DA - 25.03.2025 KW - Humidity sensor KW - Optical fibre sensors KW - Distributed temperature sensing PY - 2025 AN - OPUS4-63007 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lu, Xin A1 - Hicke, Konstantin A1 - Breithaupt, Mathias A1 - Strangfeld, Christoph T1 - Distributed Humidity Sensing in Concrete Based on Polymer Optical Fiber N2 - We present a preliminary investigation on distributed humidity monitoring during the drying process of concrete based on an embedded polymer optical fiber (POF). The water dissipated into the POF changes several properties of the fiber such as refractive index, scattering coefficient and attenuation factor, which eventually alters the Rayleigh backscattered light. The optical time Domain reflectometer (OTDR) technique is performed to acquire the backscattered signal at the wavelengths 650 nm and 500 nm, respectively. Experimental results show that the received signal increases at 650 nm while the fiber attenuation factor clearly increases at 500 nm, as the concrete dries out. In the hygroscopic range, the information retrieved from the signal change at 650 nm agrees well with the measurement result of the electrical humidity sensors also embedded in the concrete sample. KW - Distributed fiber optic sensing KW - Distributed humidity sensing KW - Polymer optical fibers KW - Concrete drying KW - Material moisture KW - Embedded humidity sensors PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-537644 DO - https://doi.org/10.3390/polym13213755 SN - 2073-4360 VL - 13 IS - 21 SP - 3755 PB - MDPI CY - Basel, Switzerland AN - OPUS4-53764 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin T1 - Humidity response analysis of optical fibers with hygroscopic coatings based on Lamé’s equations N2 - Optical fibers with hygroscopic coatings are widely used for humidity sensing, where the coating expands upon absorbing water, inducing strain in the fiber. This strain is then used to determine humidity. However, previous studies have oversimplified the strain generation process. A comprehensive three-dimensional model of the mechanical interaction between the coating and the fiber is built based on Lamé’s equations. An analytical expression for the induced strain is derived. The proposed model predicts larger humidity-induced strain compared to the reported ones, given the same Young’s modulus or coefficient of humidity expansion for the coating. Interestingly, the effect of coating thickness on strain response are quite similar for both methods. Experimental validation using fibers with a polyimide coating shows strong agreement with the theoretical predictions. T2 - 29th International Conference on Optical Fiber Sensors CY - Porto, Portugal DA - 26.05.2025 KW - Distributed fiber sensing KW - Humidity sensors KW - Lamé’s equations KW - Reflectometry KW - Optical fiber sensors KW - Rayleigh scattering KW - Structural health monitoring PY - 2025 AN - OPUS4-63261 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin T1 - Polarization diversity detection based wavelength scanning coherent optical time domain reflectometry N2 - Although wavelength scanning coherent optical time-domain reflectometry (WS-COTDR) system is immune to fading effect, it suffers from occasional and localized large errors caused by the false peak in the correlation spectrum due to the large signal generated in the random interference of the backscattered light. Polarization diversity detection is applied to a standard WS-COTDR system to suppress large measurement errors. In this way, the orthogonally polarized components of backscattered light can be obtained and processed separately. Due to the birefringence of the sensing fiber, the components experience different interference processes, so the average of their correlation spectrum can suppress the false peaks and finally reduce the occurrence of larger errors. The effectiveness of the proposed method is validated in laboratory for monitoring of sinusoidal vibrations and in field for tracking the bus movement via a dark fiber. T2 - 29th International Conference on Optical Fiber Sensors CY - Porto, Portugal DA - 26.05.2025 KW - Coherent optical time domain reflectometry KW - Traffic monitoring KW - Polarization diversity detection KW - Distributed fiber sensing PY - 2025 AN - OPUS4-63260 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Schukar, Marcus A1 - Großwig, S. A1 - Weber, U. A1 - Krebber, Katerina T1 - Monitoring acoustic events in boreholes using wavelengthscanning coherent optical time domain reflectometry in multimode fiber N2 - A distributed acoustic sensor (DAS) based on wavelength-scanning coherent optical time domain reflectometer (WS-COTDR) is tested in an underground gas storage based on a multimode fiber for the first time to the best of our knowledge. The WS-COTDR acquires the reflection spectrum by scanning the wavelength of the laser and uses the spectra to calibrate strain. It overcomes the fading problem which is common for all DAS systems, and possesses the advantage of simple configuration and low-cost. The working principle of the system is well explained and the measurement results are presented. Various artificial and natural acoustic events have been successfully detected by the WS-COTDR. Such a sensor demonstrates several advantages over the traditional DAS systems, so it is supposed to be widely used in the oil and gas industry. T2 - EAGE GeoTech 2021 Second EAGE Workshop on Distributed Fibre Optic Sensing CY - Online meeting DA - 01.03.2021 KW - Leakage detection KW - Distributed acoustic sensing KW - Distributed fiber optic sensing PY - 2021 DO - https://doi.org/10.3997/2214-4609.202131010 SP - Paper 10, 1 PB - European Association of Geoscientists & Engineers CY - Houten, Niederlande AN - OPUS4-52248 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -