TY - RPRT A1 - Recknagel, Christoph A1 - Eilers, M. A1 - Alte-Teigeler, R. A1 - Borchers, R. A1 - Commer, T. A1 - Gallai, G. A1 - Goldschmidt, M. A1 - Habiger, D. A1 - Karczewski, B. A1 - Koll, R.-J. A1 - Lorenz, S. A1 - Marossow, H. A1 - Rossi, M. A1 - Schneider, T. A1 - Seiffart, J. A1 - Staeck, M. A1 - Stark, S. A1 - Wehner, H. A1 - Willand, E. T1 - Hinweise für die Herstellung von Fahrbahnübergängen aus Poyurea oder Polyurethan für Ingenieurbauten - H FüPP N2 - Diese Hinweisbroschüre erläutert allgemeine Planungsvoraussetzungen und Dimensionierungsregelungen, Baugrundsätze und Zulassungsbedingungen zur Anwendung innovativer Belagsdehnfugensysteme (Fahrbahnübergangskonstruktionen) in hochbeanspruchten Verkehrsflächen des Bundesfernstraßenbereiches. Alle planungsrelevanten, baustoffrelevanten, versuchstechnische, qualitätssichernden und baupraktischen Aspekte werden zur Unterstützung der Straßenbauverwaltungen, der Lieferfirmen und Ausführungsbetriebe erläutert. Die Veröffentlichung stellt eine technische Analyse aus Erfahrungssammlungen und Auswertung praktischer Erkenntnisse dar. KW - Brückenbeläge KW - Fahrbahnübergänge KW - Dehnfugenkonstruktionen KW - technische und technologische Anforderungen PY - 2022 SN - 978-3-86446-355-6 VL - 778 SP - 1 EP - 47 PB - Forschungsgesellschaft für Straßen- und Verkehrswesen CY - Köln AN - OPUS4-59374 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jentsch, H. A1 - Schwartz, A. A1 - Basedau, Frank A1 - Bazrafshan, K. A1 - Döring, H. A1 - Großwig, S. A1 - Hofmann, Detlef A1 - Kowalle, G. A1 - Kusche, Nadine A1 - Lorenz, R. A1 - Pfeiffer, T. A1 - Sadaghiani, M.R.S. A1 - Scholz, E. A1 - Senze, A. A1 - Tkachenko, Viktoriya A1 - Witt, K. J. ED - Xu, Y. L. ED - Zhu, S. ED - Xia, Y. ED - Ni, Y.Q. ED - Law, S.S. ED - Yin, J. H. ED - Su, Z.Q. T1 - Detection of slipping soil areas with embedded tiny vertical sensing rods N2 - Critical soil zones where large areas along a shear joint might begin to slip should be recognized. In order to avoid damage, monitoring of such unstable zones is necessary. First, soil movements must be detected as early as possible, second, the amount of deformation should be estimated. Because geodetical methods do not provide information about deformation in the underground in different depths, the only way to come to information from possible shear zones is the installation of deformation measurement systems. A special installation method was developed to bring a long-gauge length measurement system into a borehole and transfer data of soil deformations into an installed sensing rod. The mostly vertically installed sensing rod has an outer diameter of 3 mm to 6 mm and contains several optical fibres. One fibre provides integral strain information along the whole length of the rod. To get this information, the phase difference between the fibre input and output is measured and the change of the total length of the fibre can be derived. This easy and cheap online sensing system delivers an early warning of soil deformations respectively possible slip as well as landslides. In case of warning, the second sensing system based on Fibre Bragg Grating sensors located close to the expected shear zone purposefully. It records resulting deformations in detail. In this study, three main objectives were achieved: a) development of tiny pultruded sensing rods with integrated optical sensor fibres, b) installation technology which enables the integration of the sensing rod during drilling and pile driving, and c) development of a stiff but elastic racking material to fix the rod in the soil and to transfer soil deformation into the stiffer sensing rod. These three aspects including the fibre optical measurement systems are described; results from Press Deformation Test (PDT) are presented. Test results of the fibre optical online system are compared and evaluated with the results of conventional inclinometer measurements as well as numerical modelling. An outlook for further possibilities of usage of this monitoring system is given. T2 - SHMII-6 - 6th International conference on structural health monitoring of intelligent infrastructure CY - Hong Kong, China DA - 09.12.2013 KW - Structural health monitoring KW - Soil stability monitoring KW - Optical fibre strain-sensor KW - Geotechnical soil stability KW - Soil deformation modelling PY - 2013 SN - 978-962-367-768-4 SP - 1 EP - 9 AN - OPUS4-29915 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Boeck, T. A1 - Schmidt, K. A1 - Lorenz, M. A1 - Rosenfeld, A. A1 - Rudolph, Pascale A1 - Krüger, Jörg A1 - Kautek, Wolfgang ED - Gobrecht, J. T1 - Ultra-short pulse laser seeding techniques for silicon crystallite growth on amorphous substrates T2 - QUANTSOL 99 CY - Wildhaus, Switzerland DA - 1999-03-14 PY - 1999 SP - 1(?) EP - 3(?) AN - OPUS4-12041 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Leubner, S. A1 - Hatami, Soheil A1 - Esendemir, Nehir A1 - Lorenz, T. A1 - Joswig, J.-O. A1 - Lesnyak, V. A1 - Recknagel, Sebastian A1 - Gaponik, N. A1 - Resch-Genger, Ute A1 - Eychmüller, A. T1 - Experimental and theoretical investigations of the ligand structure of water-soluble CdTe nanocrystals N2 - The unique optical properties, such as size-tunable absorption and emission, caused semiconductor nanocrystals to attract a great deal of interest for recent technological developments. For the evaluation of semiconductor nanocrystals as new materials for various applications like optoelectronic devices, knowledge of the structure–property relationships is indispensable, but still presents a challenge. Here, we address these challenges for thioglycolic acid-capped CdTe nanocrystals with a focus on the quantification of thiol ligands, identification of the ligand shell structure and their influence on the optical properties of these nanocrystals. We present the use of a simple analytical technique, the Ellman's test, and ICP-OES analysis for the study of the surface chemistry of these nanomaterials. Together with theoretical calculations, the results of these studies show the strong influence of the amount of Cd–thiolates present in the ligand shell on the concentration-dependent emission properties, thereby providing the basis for a better understanding of the chemical nature of the NC–ligand interface. In this context, the present work contributes to the establishment of a clearer picture and better control of the surface chemistry, which will provide the basis for the design of highly emitting nanocrystals and the prediction of their applicability. PY - 2013 DO - https://doi.org/10.1039/c3dt50802a SN - 1477-9226 SN - 1477-9234 SN - 1364-5447 VL - 42 SP - 12733 EP - 12740 PB - RSC CY - Cambridge AN - OPUS4-29139 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schneider, Ralf A1 - Weigert, Florian A1 - Lesnyak, V. A1 - Leubner, S. A1 - Lorenz, T. A1 - Behnke, Thomas A1 - Dubavik, A. A1 - Joswig, J.-O. A1 - Resch-Genger, Ute A1 - Gaponik, N. A1 - Eychmüller, A. ED - Resch-Genger, Ute ED - Schneider, Ralf T1 - pH and concentration dependence of the optical properties of thiol-capped CdTe nanocrystals in water and D2O N2 - The optical properties of semiconductor nanocrystals (SC NCs) are largely controlled by their size and surface chemistry, i.e., the chemical composition and thickness of inorganic passivation shells and the chemical nature and number of surface ligands as well as the strength of their bonds to surface atoms. The latter is particularly important for CdTe NCs, which – together with alloyed CdₓHg₁₋ₓTe – are the only SC NCs that can be prepared in water in high quality without the need for an additional inorganic passivation shell. Aiming at a better understanding of the role of stabilizing ligands for the control of the application-relevant fluorescence features of SC NCs, we assessed the influence of two of the most commonly used monodentate thiol ligands, thioglycolic acid (TGA) and mercaptopropionic acid (MPA), on the colloidal stability, photoluminescence (PL) quantum yield (QY), and PL decay behavior of a set of CdTe NC colloids. As an indirect measure for the strength of the coordinative bond of the ligands to SC NC surface atoms, the influence of the pH (pD) and the concentration on the PL properties of these colloids was examined in water and D₂O and compared to the results from previous dilution studies with a set of thiol-capped Cd₁₋ₓHgₓTe SC NCs in D₂O. As a prerequisite for these studies, the number of surface ligands was determined photometrically at different steps of purification after SC NC synthesis with Ellman’s test. Our results demonstrate ligand control of the pH-dependent PL of these SC NCs, with MPA-stabilized CdTe NCs being less prone to luminescence quenching than TGA-capped ones. For both types of CdTe colloids, ligand desorption is more pronounced in H₂O compared to D₂O, underlining also the role of hydrogen bonding and solvent molecules. KW - Quantum dots KW - Fluorescence KW - Ligand analysis KW - Nano particles PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-371253 DO - https://doi.org/10.1039/c6cp03123d VL - 18 IS - 28 SP - 19083 EP - 19092 PB - RSC CY - Cambridge AN - OPUS4-37125 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kozachynskyi, Volodymyr A1 - Staubach, Dario A1 - Esche, Erik A1 - Biegler, Lorenz T. A1 - Repke, Jens-Uwe T1 - Parameter estimation in dynamic multiphase liquid–liquid equilibrium systems N2 - Modeling dynamic systems with a variable number of liquid phases is a challenging task, especially in scenarios where the model is designed for optimization tasks such as parameter estimation. Although there exist methods to model the appearance and disappearance of liquid phases in dynamic systems, they usually require integer variables. In this work, the smoothed continuous approach (SCA) is developed for use with a large number of solvers, since it relies only on continuous variables. To demonstrate the applicability of the new method, the SCA is then applied to model the batch esterification of acetic acid with 1-propanol to water and propyl acetate, and to estimate the reaction parameters. Since the mixture may separate into two liquid phases during the course of the reaction, the parameters are estimated with information on the liquid compositions of both separated liquid phases, which improves the accuracy of the parameter estimates and opens new possibilities for optimal experimental design. KW - Parameter Estimation KW - Uncertainty KW - Dynamic Modeling PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-650059 DO - https://doi.org/10.1016/j.compchemeng.2025.109485 SN - 0098-1354 VL - 206 SP - 1 EP - 16 PB - Elsevier Ltd. AN - OPUS4-65005 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -