TY - JOUR A1 - Osterloh, Kurt A1 - Röhrs, S. A1 - Schwabe, A. A1 - Radujcovic, S. A1 - Bücherl, T. A1 - Dangendorf, V. A1 - Zscherpel, Uwe A1 - Reiche, I. A1 - Nüsser, A. ED - Zscherpel, Uwe ED - Kasperl, S. T1 - Elucidating the distribution of organic consolidants in wood by Neutron Tomography N2 - While the absorption of X-rays and gamma radiation is determined by the Z-number of the elements a specimen is composed of, it is the hydrogen making an effective contrast with neutron imaging. As a consequence, interrogating with neutrons presents a suitable tool to study the distribution of organic consolidants in materials such as wood as encountered in impregnated wooden artworks. Four different examples of objects are presented here to demonstrate the potential of neutron CT: 1) small wooden pieces of ship wrecks (< 2 cm thickness) interrogated with cold neutrons (0.5 meV at the ANTARES facility of the FRM II in Garching) to demonstrate the potential and the limitation of using low energy neutrons, 2) a wooden statue soaked with carbolineum (fission neutrons 1.8 MeV at the NECTAR facility of the FRM II), 3) a smaller wooden figure of a skull heavily soaked with carbolineum so it was too tight for the fission neutrons used before with accelerator neutrons (broad range about 5.5 MeV at the PTB in Braunschweig) and 4) pieces of charred wood to study the impregnation with a consolidant (NECTAR, FRM II). With the exception of the last example, all results have been combined with X-ray tomography (BAM 8.3 in Berlin). In the case of the charred wood specimens (example 4) the density histograms of the neutron tomography results were compared with those obtained from untreated references. The observed gain in specific density of the soaked specimens corresponded with an increase of specific weight. All results obtained so far showed distinct distribution patterns attributable to structural peculiarities or organic consolidants providing valuable support for subsequent restoration works. T2 - International symposium on digital industrial radiography and computed tomography DIR2019 CY - Fürth, Germany DA - 02.07.2019 KW - Neutron Imaging KW - Cold to fast neutron testing KW - Tomography of wood samples KW - Art restauration PY - 2019 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-505326 UR - https://www.ndt.net/search/docs.php3?id=24740 SN - 1435-4934 VL - 24 IS - 11 SP - 1 EP - 8 PB - NDT.net CY - Kirchwald AN - OPUS4-50532 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Osterloh, Kurt A1 - Jaenisch, Gerd-Rüdiger T1 - Rare events - a probability approach or an ill-posed problem? N2 - Rare events are understood to be events occurring once in a while but with dramatic consequences. Their occurrence cannot be predicted precisely, only a probability might be estimated, for example from past experiences. However, it might be rather misleading to attempt to describe them by distribution curves that apply for frequent or repeated observations, such as the Gaussian bell shape. Alternative distributions have been introduced to characterise the intervals at which a certain event may occur. It is the aim of technical safety and public security to prevent adverse events. Detectable indications that are typical for their course and are observable have to be identified before an incident occurs. Since they should be characteristic for such cases, they themselves also constitute rare events. The problem encountered in any detection system is that nothing is perfect. As in medical diagnostics, true indications may be missed or false test responses may pretend to be something that does not exist. Balancing missed indications with false positive calls is achieved with the aid of the so-called receiver operating characteristics (ROC). However, with the aid of Bayes’ inference it can be shown that identifying signs of a rarely occurring indication is like looking for a needle in a haystack, even with an excellent detection Approach with a low miss rate and an even lower probability of false calls. The inclusion of additionally available information may lead to a more effective search strategy. When employing imaging methods for detecting flaws or illicit items, the identification of rare indications can be impeded by blurring noise or overlapping items. The identification of the features sought can be supported by including information on their typical characteristics by regularisation algorithms. The strategy of such an approach is demonstrated in a simplified example with a plain geometric figure (circle) corrupted with structural noise. The shape of the original figure was clearly recovered. In general, search strategies should aim at an indication typical for the event to be prevented; otherwise, alternative approaches have to be considered, including, perhaps, serendipity. KW - Rare events KW - Bayes statistics KW - Ill-posed problems PY - 2016 DO - https://doi.org/10.1784/insi.2016.58.1.46 SN - 0007-1137 VL - 58 IS - 1 SP - 46 EP - 51 PB - British Institute of Non-Destructive Testing CY - Northampton AN - OPUS4-35312 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Osterloh, Kurt A1 - Bellon, Carsten A1 - Hohendorf, Stefan A1 - Kolkoori, Sanjeevareddy A1 - Wrobel, Norma A1 - Nusser, A. A1 - Freitag, M. A1 - Bücherl, T. A1 - Bar, D. A1 - Mor, I. A1 - Tamin, N. A1 - Weiss-Babai, R. A1 - Bromberger, B. A1 - Dangendorf, V. A1 - Tittelmeier, K. T1 - Computed tomography with X-rays and fast neutrons for restoration of wooden artwork N2 - The objects of this investigation were sculptures taken from a ca. three hundred years old baroque epitaph of a church in Tonning, a town in Northern Germany. Around 1900 it was found in a disastrous state heavily damaged by wood-worm. At that time, the whole artwork was treated with the tar extract carbolineum as a remedy. Nowadays, this substance has been identified as carcinogenic, and its presence can be perceived by its stench and visually at certain spots on the surface where it has penetrated the covering paint. A gold-painted sculpture of a massive wooden skull was interrogated with X-rays and fast neutrons to investigate the internal distribution of the carbolineum. The X-ray tomography, with its excellent spatial resolution revealed galleries left over from the worm infestation in the outer areas and cracks in the central region. The golden color coating appeared as a thick and dense layer. In comparison the tomography with fast neutrons, though being of lower resolution and yet unresolved artefacts revealed sections of slightly different densities in the bulk of the wood. These differences we attribute to the differences in the distribution of the impregnant in the wood, visible due to its higher hydrogen content making it less transparent for neutrons. T2 - WCNR-10 - 10th World conference on neutron radiography CY - Grindelwald, Switzerland DA - 05.10.2014 KW - Computed tomography KW - Neutron radiology KW - Conservation of wooden artwork PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-323050 DO - https://doi.org/10.1016/j.phpro.2015.07.066 SN - 1875-3892 VL - 69 SP - 472 EP - 477 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-32305 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Jaenisch, Gerd-Rüdiger T1 - Ways to understand and approach rare events N2 - As a matter of fact, avoiding unexpected events with an undesired outcome is an element of survival strategies. Such events are encountered unexpectedly mainly because they occur rarely. Both, safety and security measures are the main pillars to prevent them by appropriate inspections. Common tools in both areas e.g. are radiological technologies enabling an insight into objects to detect suspicious features without even touching them. Since any of these measures is linked to efforts, costs or even obstructions of ongoing processes, it needs a rationale to invest into an appropriate activity. A putative objection to take action in this direction always could be the question 'when and how often it could happen'. This gave rise to find approaches how to define 'rare events' and how to deal with them. Since they entail both, the frequency of occurrence and the unpleasantness of the possible outcome make them to have something in common with the definition of risk: a combination of the probability of occurrence of harm and the severity of that harm. Tackling putative consequences is one side of the coin whereas understanding the rareness of an event is the other, an aspect that worries but not always fully understood. As a first step in approaching the subject 'rare events', the putative occurrence rate is considered in terms of probability distribution functions or their cumulative ones, resp. The problems of estimating an incidence of such an event will be tackled subsequently with the problem of assessing the reliability of diagnostic measures. Any numeric approach of dealing with rare events inevitably remains an ill defined or 'ill-posed' problem that needs additional information for a reasonably satisfying solution. Ways to ease this situation can be found in utilizing additional information, also commonly called prior knowledge, that might be introduced via the Bayesian inference or by regularization algorithms. Simplified models will demonstrate how to apply such tools. As a consequence, there are ways helping to avoid unexpected ad 'surprises' by taking adequate measures in due time upon the correct perception of certain indications. T2 - ECNDT 2014 - 11th European conference on non-destructive testing CY - Prague, Czech Republic DA - 06.10.2014 KW - NDT-wide KW - Public security KW - Technical safety KW - Reliability KW - Indications and inspections KW - Compensation of insufficient knowledge PY - 2014 UR - http://www.ndt.net/events/ECNDT2014/app/content/Paper/562_Osterloh.pdf SN - 978-80-214-5018-9 SP - 1 EP - 9 AN - OPUS4-32302 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt T1 - EFNDT working group 5 'NDT technology for public security and safety', two areas with the same aim N2 - It is a quite common and understandable wish to make the world a safer place. This entails both freedom from danger, and thus encompasses both, safety and security. However, it is a trivial fact that public security and technical safety are commitments to distinct social entities that might be quite understandable due to the various kinds of threats. On the other hand, it is a common justifiable interest to have effective methodologies to detect them in time, i.e., before something disastrous might happen. It is rather obvious that particularly non-destructive inspection technologies, namely radiological methods, are applied in both areas. As a logical consequence, sharing the technical knowledge and experiences could be of benefit for both of them. However, the different areas of activities cleave the information exchange between them. In order to overcome this gap, the EFNDT Working Group 5 'NDT Technology for Public Security and Safety' (EFNDT WG 5) has taken an initiative to bring together actors of both areas of activities, symbolized as building a 'bridge'. The activities of the EFNDT WG 5 range from identifying features exhibiting certain threats that are detectable with available NDT technologies, adapting and improving them according to their specified applications and to search for alternative technologies or ways of applications where deemed to be applicable. Successful exchanges of information and experiences have been achieved in recent workshops, where also new ideas have been raised for future common projects. This kind of work is far from being completed; it is more or less at its beginning. In future workshops it is intended to follow up these ideas and to pave the way for future common interdisciplinary projects. Therefore, all groups involved in such projects are welcome, not only researchers and NDT-specialists, but also all endusers of the respective technologies as well as theoreticians for risk assessment, performance evaluation, modelling, statistics etc. All the addressed areas are deemed to play an important role in making the world a safer place, cooperatively. T2 - ECNDT 2014 - 11th European conference on non-destructive testing CY - Prague, Czech Republic DA - 06.10.2014 KW - NDT-wide KW - Technical safety KW - Public security KW - EFNDT working groups KW - Interdisciplinary cooperation KW - Miscellaneous PY - 2014 UR - http://www.ndt.net/events/ECNDT2014/app/content/Paper/154_Osterloh.pdf SN - 978-80-214-5018-9 SP - 1 EP - 5 AN - OPUS4-32303 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Nusser, A. T1 - X-ray and neutron radiological methods to support the conservation of wooden artworks soaked with a polluting impregnant 'carbolineum' N2 - Wooden artworks residing in churches for centuries inevitably suffered from decaying processes such as Wood worm infestation. About 100 years ago, this process was ceased with a polluting coal tar extract 'Carbolineum', a treatment usually applied to railway sleepers. Nowadays, this lead to undesired effects not only of causing dark stains on the surface of the treated sculptures but also in unimpaired release of traces of harmful substances into the atmosphere perceptible as the typical smell of coal tar oil. To resolve this problem, the knowledge of the internal structure could provide a support for this effort. As an example, sculptures from an epitaph in a church in northern Germany were subjected to X-ray and neutron computed tomography (CT). The purpose of using neutrons was to get information about the distribution of the impregnant Carbolineum. It consists of a mixture of polycyclic aromatic hydrocarbons which should increase the absorption of neutrons. In contrast, X-rays are rather poorly absorbed by such substances as compared to the wood matrix. All radiographic approaches revealed traces of previous conservation measures that were not always documented in detail. Comparing the neutron images with those from the X-ray interrogation some differences became obvious indicating varied material compositions. Nails e.g. were clearly visible in the X-ray images rather than in the neutron ones. Some less visibly stained parts of the sculptures correspond with obviously replaced materials in the inside. These results will be used to identify ways how to treat the infested artworks. T2 - ECNDT 2014 - 11th European conference on non-destructive testing CY - Prague, Czech Republic DA - 2014-10-06 KW - Radiographic testing (RT) KW - Computed tomography (CT) KW - Cultural heritage KW - Radiological methods KW - Carbolineum KW - Wooden artworks KW - Neutron-CT KW - X-ray CT KW - Neutron radiology PY - 2014 UR - http://www.ndt.net/events/ECNDT2014/app/content/Paper/155_Osterloh.pdf SN - 978-80-214-5018-9 SP - 1 EP - 8 AN - OPUS4-32304 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Nusser, A. T1 - Zerstörungsfreien Einblick in den inneren Zustand hölzerner Kunstobjekte oder wie gehen wir mit unserem Kulturgut um T2 - BAM Fachbereichskolloqium 8.3 CY - BAM Berlin DA - 2014-12-15 PY - 2014 AN - OPUS4-32232 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt T1 - EFNDT Working Group 5 "NDT Technology for Public Security and Safety", two areas with the same aim T2 - 11th European Conference on NDT (ECNDT 2014) CY - Prague, Czech Republic DA - 2014-10-06 PY - 2014 AN - OPUS4-32233 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Nusser, A. T1 - X-ray and neutron radiological methods to support the conservation of wooden artworks soaked with a polluting impregnant "Carbolineum" T2 - 11th European Conference on NDT (ECNDT 2014) CY - Prague, Czech Republic DA - 2014-10-06 PY - 2014 AN - OPUS4-32235 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Bellon, Carsten A1 - Hohendorf, Stefan A1 - Kolkoori, Sanjeevareddy A1 - Wrobel, Norma A1 - Nusser, A. A1 - Freitag, M. A1 - Bücherl, T. A1 - Bar, D. A1 - Mor, I. A1 - Tamin, N. A1 - Weiss-Babai, R. A1 - Bromberger, B. A1 - Dangendorf, V. A1 - Tillelmeier, K. T1 - Computed Tomography with X-rays and Fast Neutrons for Restoration of Wooden Artwork T2 - 10th World Conference on Neutron Radiography CY - Grindelwald, Switzerland DA - 2014-10-05 PY - 2014 AN - OPUS4-32241 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Jaenisch, Gerd-Rüdiger T1 - Ways to Understand and Approach Rare Events T2 - 11th European Conference on NDT (ECNDT 2014) CY - Prague, Czech Republic DA - 2014-10-06 PY - 2014 AN - OPUS4-32227 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Nusser, A. T1 - Zerstörungsfreien Einblick in den inneren Zustand hölzerner Kunstobjekte oder wie gehen wir mit unserem Kulturgut um T2 - DGZfP-Arbeitskreis in der Technischen Universität Ilmenau CY - Ilmenau DA - 2014-12-11 PY - 2014 AN - OPUS4-32230 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nusser, A. A1 - Osterloh, Kurt A1 - Freitag, M. A1 - Simon, S. ED - Reiche, I. T1 - Analyse von mit Carbolineum belastetem Kulturgut und modellhafte Erprobung konservatorischer Dekontaminierung N2 - The baroque epitaph Reyer (1704) at the St. Laurentius church in Tönning was treated with carbolineum as a wood preservation agent in 1903. The subsequent constant migration of carbolineum through the layers of paint to the surface has had a detrimental effect on the aesthetic appearance of the epitaph. Carbolineum is an oily, water-insoluble, flammable, dark brown mixture of coal tar oil components. Due to its content of polycyclic aromatic hydrocarbons (PAH), which are classified as carcinogenic and harmful to the environment, the use of carbolineum has been forbidden. The aim of the project is to develop an exemplary Conservation treatment (hat will reduce the toxic contents of the historical wooden object. The new method should be applicable to similar objects that are also contaminated with carbolineum. The historic carbolineum was identified by the GC-MS method and the X-Ray computed tomography revealed the biological wood damage and previous restoration measures. Several decontamination methods such as the extraction with supercritical C02, with dichloromethane vapour/fluids, with 1,3-dioxolane or with petrol ether by vaccum impregnation were investigated. This project is founded by the Deutsche Bundesstiftung Umwelt (DBU). KW - Kulturgut aus Holz KW - Holzschutz KW - Computertomographie PY - 2014 SN - 0344-5089 VL - 22 SP - 77 EP - 82 PB - Rathgen-Forschungslabor CY - Berlin AN - OPUS4-32516 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt T1 - Die EFNDT Arbeitsgruppe 5 "Öffentliche Sicherheit mit ZfP-Techniken" arbeitet weiter T2 - DGZfP Jahrestagung 2014 CY - Potsdam, Germany DA - 2014-05-26 PY - 2014 AN - OPUS4-31151 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Nusser, A. A1 - Schwabe, A. A1 - Redmer, Bernhard A1 - Bellon, Carsten A1 - Kolkoori, Sanjeevareddy A1 - Wrobel, Norma T1 - Computertomographie für die Erhaltung von Kulturgütern aus Holz T2 - DGZfP Jahrestagung 2014 CY - Potsdam, Germany DA - 2014-05-26 PY - 2014 AN - OPUS4-31152 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wrobel, Norma A1 - Kolkoori, Sanjeevareddy A1 - Osterloh, Kurt A1 - Ewert, Uwe ED - Lauster, M. T1 - High energy X-ray radiography: detection of dangerous materials in cargo containers N2 - For the radiographic investigation of large cargo Containers the energies of conventional Xray tubes are inadequately for certain layer thicknesses. In that case the high energy radiation sources like electron accelerators and gamma radiators (60CO) are adequate for the non invasive inspection of large Containers because of the high penetration through thick materials. Multiple imaging even enables to distinguish between different materials. The main challenging task in air and sea cargo Container inspection is to improve the detectability of contraband and dangerous materials which are hidden in the heterogeneously packed Containers by detailed analysis of cluttered radiographic images. So it is to be expected that objects of organic substances like certain explosives or their precursors are hard to identify behind thick walls of heavy metal objects such as engine-blocks with flat bottom holes. The primary aim here is to investigate the detectability of dangerous materials (typically of light elements) in cargo Containers using high energy X-ray digital radiography. T2 - 8th Future security research conference CY - Berlin, Germany DA - 17.09.2013 KW - Hochenergieradiographie KW - Containerprüfung KW - Materialerkennung PY - 2013 SN - 978-3-8396-0604-9 SP - 461 EP - 462 PB - Fraunhofer Verlag AN - OPUS4-29326 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Osterloh, Kurt A1 - Wrobel, Norma A1 - Kolkoori, Sanjeevareddy T1 - EFNDT Working Group 5 - der Brückenschlag zwischen technischer und öffentlicher Sicherhheit N2 - Die Arbeitsgruppe 5 der Europäischen Föderation für Zerstörungsfreie Prüfung (EFNDT Working Group 5 'Public Security and Safety', EFNDT WG 5) verfolgt weiterhin das Ziel, organisatorisch weit auseinanderliegende Zuständigkeiten und Arbeitsgebiete zusammenzuführen, die weitgehend mit gleichen, zumindest ähnlichen Prinzipien und Methoden arbeiten. Auf der Suche nach neuen Wegen stoßen beide Seiten auf Gemeinsamkeiten. Dies gilt auch für neue Ansätze und Bewertungsmethoden von Techniken, mit denen Risiken vermindert werden sollen. Hierzu hat in Berlin ein Workshop im Oktober 2012 stattgefunden, auf dem parallele Projekte zur Container- und Frachtsicherheit zusammengeführt werden konnten. Herausgestellt wurde die Komplementarität der laufenden Projekte, gemeinsame Aspekte sollen künftig auch zusammen bearbeitet werden. Darüber hinaus wurden neue Methoden und Vorgehensweisen vorgestellt, aber auch die Sichtweise der Europäischen Kommission mit ihren Vorstellungen zu einem europäischen Markt für Sicherheitstechnik dargestellt. Angesprochen wurden bestehende und vorgeschlagene europaweite Regulierungen und das europäische Referenznetz zum Schutz kritischer Infrastrukturen (ERNCIP), welches ein Netzwerk von Laboratorien für den Test von Sicherheitstechnik zum Ziel hat. Auf technischem Sektor standen Methoden im Vordergrund, mit denen die Gesamtmenge eines Gefahrstoffes wie z. B. Sprengstoff erkannt werden kann, und nicht nur Spuren als indirekter Hinweis. Die Arbeitsgruppe konnte somit erstmalig ein neutrales Forum für parallel laufende Projekte zur öffentlichen Sicherheit zur Verfügung stellen. Die auf den Workshops 2010 bis 2012 in Berlin gehaltenen Vorträge sind auf der Webseite des EFNDT WG 5 im geschützten Bereich zu finden. Nicht alles davon ist geeignet, es der allgemeinen Öffentlichkeit zugänglich zu machen. Deshalb sind alle Vorträge aus den Workshops in einem passwortgeschützten Verzeichnis abgelegt. Die Erteilung des Passwortes erfolgt über den Convenor der Arbeitsgruppe durch die EFNDT. Eine Erweiterung dieser Struktur zu einem Austauschforum ist vorgeschlagen. Zur Teilnahme daran sind nicht nur Mitglieder in den Gesellschaften für zerstörungsfreie Prüfung eingeladen, sondern auch diejenigen, die in den Anwendungsgebieten zur öffentlichen Sicherheit tätig sind. KW - Zerstörungsfreie Prüfung (ZfP) KW - Brücke zur öffentlichen Sicherheit PY - 2013 DO - https://doi.org/10.3139/120.110479 SN - 0025-5300 VL - 55 IS - 7-8 SP - 582 EP - 587 PB - Hanser CY - München AN - OPUS4-29327 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kolkoori, Sanjeevareddy A1 - Wrobel, Norma A1 - Osterloh, Kurt A1 - Zscherpel, Uwe A1 - Ewert, Uwe T1 - Novel X-ray backscatter technique for detection of dangerous materials: application to aviation and port security N2 - Radiological inspections, in general, are the nondestructive testing (NDT) methods to detect the bulk of explosives in large objects. In contrast to personal luggage, cargo or building components constitute a complexity that may significantly hinder the detection of a threat by conventional X-ray transmission radiography. In this article, a novel X-ray backscatter technique is presented for detecting suspicious objects in a densely packed large object with only a single sided access. It consists of an X-ray backscatter camera with a special twisted slit collimator for imaging backscattering objects. The new X-ray backscatter camera is not only imaging the objects based on their densities but also by including the influences of surrounding objects. This unique feature of the X-ray backscatter camera provides new insights in identifying the internal features of the inspected object. Experimental mock-ups were designed imitating containers with threats among a complex packing as they may be encountered in reality. We investigated the dependence of the quality of the X-ray backscatter image on (a) the exposure time, (b) multiple exposures, (c) the distance between object and slit camera, and (d) the width of the slit. At the end, the significant advantages of the presented X-ray backscatter camera in the context of aviation and port security are discussed. KW - Inspection with x-rays KW - Detection of explosives KW - Compton imaging KW - Detection of defects PY - 2013 DO - https://doi.org/10.1088/1748-0221/8/09/P09017 SN - 1748-0221 VL - 8 IS - 9 SP - P09017-1 EP - P09017-18 PB - Inst. of Physics Publ. CY - London AN - OPUS4-29329 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kolkoori, Sanjeevareddy A1 - Wrobel, Norma A1 - Osterloh, Kurt A1 - Redmer, Bernhard A1 - Deresch, Andreas A1 - Ewert, Uwe T1 - Hochenergieradiographie - Erkennung von Einzelheiten in großen, komplexen Schichttiefen N2 - Zur Durchstrahlung großer, dichter Objekte reichen die Energien, die mit normalen Röntgenröhren erzielt werden können, ab gewissen Schichtdicken nicht mehr aus. Als hochenergetische Strahlenquellen stehen Kobalt-60 und Elektronenbeschleuniger zur Verfügung. Als Einschränkung der Hochenergieradiographie ist der geringere Kontrast besonders beim Vorhandensein leichterer Objekte umgeben von Körpern bestehend aus schweren Elementen anzusehen. Es ist daher zu erwarten, dass Objekte aus organischen Substanzen hinter dicken Schwermetallwänden oder in Bohrungen von Metallblöcken schwer zu erkennen sind. Im Gegensatz zu einem Gammastrahler wie Kobalt-60 mit den beiden Spektrallinien um 1,3 MeV besitzt die Bremsstrahlung aus einem Beschleuniger einen wesentlichen Anteil an niederenergetischer Strahlung, der fließend zu höheren Energien übergeht. Es wird hier untersucht, welche Signaturen von leichten Materialien in einer Umgebung aus Schwermetall bis zu welcher Dicke und bis zu welchem Komplexizitätsgrad erkennbar sind. Mit einem Betatron (JME X-ray Betatron 7,5 MeV) und einem Matrixdetektor (Perkin Elmer XRD 1621) wurden Aufnahmen von unterschiedlichen leichten Objekten angefertigt, die zunehmend in eine Umgebung aus Schwermetallen gestellt wurden. Mit unterschiedlichen Energieeinstellungen wurde untersucht, inwieweit eine Materialerkennung hinter welcher Abschirmung möglich ist. Die experimentellen Ergebnisse werden mit Simulationen verglichen, die mit einer Software zur Modellierung von Durchstrahlungsverfahren (aRTist) erzeugt wurden. Dabei wird dem Problem der Aufhärtung bei Anwendung von Bremsstrahlung Rechnung getragen. Die Ergebnisse können sowohl zur Erkennung von Fremdkörpern in Maschinen oder Pumpen als auch zur Überprüfung von Frachtladungen im Bereich der öffentlichen Sicherheit und bei Zollkontrollen dienen. T2 - DGZfP-Jahrestagung 2013 CY - Dresden, Germany DA - 06.05.2013 KW - Hochenergieradiographie KW - Containerprüfung KW - Materialerkennung PY - 2013 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-288589 SN - 978-3-940283-49-8 IS - DGZfP-BB 141 (Mo.2.A.4) SP - 1 EP - 9 PB - Deutsche Gesellschaft für zerstörungsfreie Prüfung e.V. (DGZfP) AN - OPUS4-28858 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kolkoori, Sanjeevareddy A1 - Wrobel, Norma A1 - Osterloh, Kurt A1 - Redmer, Bernhard A1 - Deresch, Andreas A1 - Ewert, Uwe T1 - Hochenergieradiografie - Erkennung von Einzelheiten in großen, komplexen Schichttiefen N2 - Zur Durchstrahlung großer, dichter Objekte reichen die Energien, die mit normalen Röntgenröhren erzielt werden können, ab gewissen Schichtdicken nicht mehr aus. Als hochenergetische Strahlenquellen stehen Kobalt-60 und Elektronenbeschleuniger zur Verfügung. Als Einschränkung der Hochenergieradiografie ist der geringere Kontrast besonders beim Vorhandensein leichterer Objekte umgeben von Körpern bestehend aus schweren Elementen anzusehen. Es ist daher zu erwarten, dass Objekte aus organischen Substanzen hinter dicken Schwermetallwänden oder in Bohrungen von Metallblöcken schwer zu erkennen sind. Im Unterschied zu einem Gammastrahler wie Kobalt-60 mit den beiden Spektrallinien um 1,3 MeV besitzt die Bremsstrahlung aus einem Beschleuniger einen wesentlichen Anteil an niederenergetischer Strahlung, der fließend zu höheren Energien übergeht. Es wird hier untersucht, welche Signaturen von leichten Materialien in einer Umgebung aus Schwermetall bis zu welcher Dicke und bis zu welchem Komplexitätsgrad erkennbar sind. Mit einem Betatron (JME X-ray Betatron 7,5 MeV) und einem Matrixdetektor (Perkin Elmer XRD 1621) wurden Aufnahmen von unterschiedlichen leichten Objekten angefertigt, die zunehmend in eine Umgebung aus Schwermetallen gestellt wurden. Mit unterschiedlichen Energieeinstellungen wurde untersucht, inwieweit eine Materialerkennung hinter welcher Abschirmung möglich ist. Die experimentellen Ergebnisse werden mit Simulationen verglichen, die mit einer Software zur Modellierung von Durchstrahlungsverfahren (aRTist) erzeugt wurden. Dabei wird dem Problem der Aufhärtung bei Anwendung von Bremsstrahlung Rechnung getragen. Die Ergebnisse können sowohl zur Erkennung von Fremdkörpern in Maschinen oder Pumpen als auch zur Überprüfung von Frachtladungen im Bereich der öffentlichen Sicherheit und bei Zollkontrollen dienen. KW - Hochenergieradiographie KW - Containerprüfung KW - Materialerkennung PY - 2013 DO - https://doi.org/10.3139/120.110492 SN - 0025-5300 VL - 55 IS - 9 SP - 683 EP - 688 PB - Hanser CY - München AN - OPUS4-29057 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wrobel, Norma A1 - Kolkoori, Sanjeevareddy A1 - Osterloh, Kurt T1 - Röntgenrückstreuradiografie - Eindringen statt Durchdringen, aber Bilder mit Schatten N2 - Der große praktische Vorteil der Rückstreuradiografie allgemein ist, dass kein Bilddetektor am Objekt auf der der Strahlenquelle gegenüberliegenden Seite aufgestellt werden muss. Dieses ist immer dann gegeben, wenn sich das Untersuchungsobjekt in oder an einer Wand befindet oder es so groß ist, dass eine Durchstrahlung aufgrund der zu durchdringenden Schichtdicken nicht infrage kommt. Von der üblichen Methode, das Objekt mit einem wandernden ausgeblendeten Einzelstrahl ('Bleistiftstrahl') abzutasten und die gesamte rückgestreute Strahlung großflächig zu registrieren, unterscheidet sich das hier verwendete Verfahren grundsätzlich. Das Objekt wird voll von einem (unkollimierten) Kegelstrahl angestrahlt. Das Bild wird mit einer Kamera aus absorbierendem Material (Wolfram, Blei) aufgenommen, die einen Matrixdetektor als Bildempfänger enthält. Die 'Optik' besteht aus einer besonders geformten Schlitzblende, die nach einem erweiterten Lochkameraprinzip arbeitet, das auch dickere Blendenmaterialschichten zulässt. Die voneinander unabhängige Positionierung von Kamera und Strahlenquellen erlaubt unterschiedliche Einstrahlgeometrien, die verschiedene Ergebnisbilder liefern. So erscheint ein komplexer Gegenstand vor einer rückstreuenden Wand völlig anders, als wenn er frei im Raum steht. Röntgenrückstreubilder müssen deshalb abhängig von ihrer 'Ausleuchtung' mit der Röntgenstrahlung und näheren Umgebung interpretiert werden. KW - Röntgen-Rückstreuradiographie KW - Schlitzblende KW - Variable Einstrahlgeometrie PY - 2013 SN - 0025-5300 VL - 55 IS - 9 SP - 689 EP - 693 PB - Hanser CY - München AN - OPUS4-29058 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Nusser, A. A1 - Schwabe, A. T1 - Einblick ins Innenleben delikater Holzobjekte durch Zerstörungsfreie Prüfung - ein Weg zur Wahrung unseres Kulturgutes T2 - DGZfP Arbeitskreis Zwickau-Chemnitz CY - Zwickau, Germany DA - 2013-12-10 PY - 2013 AN - OPUS4-29945 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Nusser, A. A1 - Schwabe, A. A1 - Kolkoori, Sanjeevareddy A1 - Bücherl, T. T1 - Radiography and Tomography: Interrogation of Wood with Neutrons T2 - Joint German-Israeli Research Programme Meeting (ACCIS) CY - Rehovot, Israel DA - 2013-11-24 PY - 2013 AN - OPUS4-29946 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Wrobel, Norma A1 - Kolkoori, Sanjeevareddy T1 - Röntgen-Rückstreutechnik, "Licht und Schatten verstehen" T2 - BAM Abteilungsseminar 8 "Zerstörungsfreie Prüfung" CY - Berlin, Germany DA - 2013-11-11 PY - 2013 AN - OPUS4-29947 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Nusser, A. A1 - Redmer, Bernhard A1 - Hohendorf, Stefan A1 - Bellon, Carsten A1 - Kolkoori, Sanjeevareddy A1 - Schwabe, A. A1 - Bücherl, T. T1 - Radiographie und Tomographie als Grundlage für restauratorische Eingriffe in belastete hölzerne Kunstwerke T2 - 7. N.i.Ke.-Workshop, BAM CY - Berlin, Germany DA - 2013-10-17 PY - 2013 AN - OPUS4-29948 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt T1 - EFNDT Working Group 5, from mines to any kind of threats T2 - CERTIFICATION 2013 / MATEST CY - Zagreb, Croatia DA - 2013-10-09 PY - 2013 AN - OPUS4-29949 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Jaenisch, Gerd-Rüdiger A1 - Kanzler, Daniel T1 - Standardisation, Certification and Security: How to approach rate events T2 - CERTIFICATION 2013 / MATEST CY - Zagreb, Croatia DA - 2013-10-09 PY - 2013 AN - OPUS4-29950 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt T1 - BAM 8.3 Radiologische Verfahren: Durchstrahlung von Objekten T2 - Besichtigung für Arbeitsmediziner und Betriebsärzte CY - Berlin, Germany DA - 2013-09-18 PY - 2013 AN - OPUS4-29951 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Nusser, A. A1 - Kolkoori, Sanjeevareddy A1 - Schwabe, A. A1 - Bücherl, T. T1 - Neutron Computed Tomography as a Basis for Concepts in Preserving Wooden Works of Art T2 - NINMACH 2013 1st International Conference on Neutron Imaging and Neutron Methods in Archaeology and Cultural Heritage Research CY - Munich, Germany DA - 2013-09-09 PY - 2013 AN - OPUS4-29952 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Wrobel, Norma A1 - Kolkoori, Sanjeevareddy T1 - EFNDT Working Group 5: der Brückenschlag zwischen technischer und öffentlicher Sicherheit T2 - DGZfP-Jahrestagung 2013, ZfP in Forschung, Entwicklung und Anwendung CY - Dresden, Germany DA - 2013-05-06 PY - 2013 AN - OPUS4-29953 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Nusser, A. A1 - Gómez-Sánches, E. A1 - Schwabe, A. A1 - Simon, S. T1 - Analysis of historic carbolineum treatments with respect to decontamination T2 - Heritage Science And Sustainable Development For The Preservation Of Art And Cultural Assets - On The Way To The Green Museum CY - Berlin, Germany DA - 2013-04-11 PY - 2013 AN - OPUS4-29954 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Wrobel, Norma A1 - Kolkoori, Sanjeevareddy T1 - EFNDT Working Group 5 - der Brückenschlag zwischen technischer und öffentlicher Sicherheit N2 - Die Arbeitsgruppe 5 der Europäischen Föderation für Zerstörungsfreie Prüfung (EFNDT Working Group 5 „Public Security and Safety“, EFNDT WG 5) verfolgt weiterhin das Ziel, organisatorisch weit auseinanderliegende Zuständigkeiten und Arbeitsgebiete zusammenzuführen, die weitgehend mit gleichen, zumindest ähnlichen Prinzipien und Methoden arbeiten. Auf der Suche nach neuen Wegen stoßen beide Seiten auf Gemeinsamkeiten. Dies gilt auch für neue Ansätze und Bewertungsmethoden von Techniken, mit denen Risiken vermindert werden sollen. Hierzu hat in Berlin ein Workshop im Oktober 2012 stattgefunden, auf dem parallele Projekte zur Container- und Frachtsicherheit zusammengeführt werden konnten. Herausgestellt wurde die Komplementarität der laufenden Projekte, gemeinsame Aspekte sollen künftig auch zusammen bearbeitet werden. Darüber hinaus wurden neue Methoden und Vorgehensweisen vorgestellt, aber auch die Sichtweise der Europäischen Kommission mit ihren Vorstellungen zu einem europäischen Markt für Sicherheitstechnik dargestellt. Angesprochen wurden bestehende und vorgeschlagene europaweite Regulierungen und das europäische Referenznetz zum Schutz kritischer Infrastrukturen (ERNCIP), welches ein Netzwerk von Laboratorien für den Test von Sicherheitstechnik zum Ziel hat. Auf technischem Sektor standen Methoden im Vordergrund, mit denen die Gesamtmenge eines Gefahrstoffes wie z.B. Sprengstoff erkannt werden können, und nicht nur Spuren als indirektem Hinweis. Die Arbeitsgruppe konnte somit erstmalig ein neutrales Forum für parallel laufende Projekte zur öffentlichen Sicherheit zur Verfügung stellen. Die auf den Workshops 2010 bis 2012 in Berlin gehaltenen Vorträge sind auf der EFNDT WG 5 – Webseite im geschützten Bereich zu finden. Nicht alles davon ist geeignet, es der allgemeinen Öffentlichkeit zugänglich zu machen. Deshalb sind alle Vorträge aus den Workshops in einem passwortgeschützten Verzeichnis abgelegt. Die Erteilung des Passwortes erfolgt über den Convenor der Arbeitsgruppe durch die EFNDT. Eine Erweiterung dieser Struktur zu einem Austauschforum ist vorgeschlagen. Zur Teilnahme daran sind nicht nur Mitglieder in den Gesellschaften für zerstörungsfreien Prüfung eingeladen, sondern auch diejenigen, die in den Anwendungsgebieten zur öffentlichen Sicherheit tätig sind. T2 - DGZfP-Jahrestagung 2013 CY - Dresden, Germany DA - 06.05.2013 PY - 2013 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-300309 SN - 978-3-940283-49-8 IS - DGZfP-BB 141 (Poster 36) SP - 1 EP - 8 PB - Deutsche Gesellschaft für zerstörungsfreie Prüfung e.V. (DGZfP) AN - OPUS4-30030 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Osterloh, Kurt T1 - Der EFNDT WG5 Workshop in Berlin Köpenick vom 22. bis 24. Oktober 2012 PY - 2012 UR - http://www.dgzfp.de/Portals/24/Zeitung/Ausgaben/Zeitung132.pdf#page=10 SN - 1616-069X SN - 0948-5112 VL - 132 SP - 12 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung CY - Berlin AN - OPUS4-27549 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Wrobel, Norma ED - Aschenbruck, N. ED - Martini, P. ED - Meier, M. ED - Tölle, J. T1 - Safety and security, dealing with risks N2 - Reducing risks and confining them to an acceptable level can be regarded as an essential commitment of technical applications for safety purposes and the public security measures. Rating the efficiency of such measures requires an assessment of the risk that is supposed to be reduced. However, approaching this subject means to face a plethora of existing literature and an ongoing discussion if and how this can be achieved. On one hand, it remains a rather uncertain estimate particularly if it comes to rare interrupting events. On the other hand, making a decision responsibly requires a certain rational base. Several approaches exist for assessing risks, from verbal to quantitative, depending on the individual case. The frequently quoted Delphi technique represents the verbal one, others such as the Bayesian statistics a quantitative one or the consequence/probability matrix in-between. A problem remains with understanding probability. Even if an event is highly unlikely it may happen right now. T2 - Future Security 2012 - 7th Security research conference CCIS CY - Bonn, Germany DA - 2012-09-04 KW - Risk definition KW - Risk assessment KW - Public safety and security PY - 2012 UR - http://link.springer.com/chapter/10.1007/978-3-642-33161-9_13 SN - 978-3-642-33160-2 SN - 978-3-642-33161-9 DO - https://doi.org/10.1007/978-3-642-33161-9 SN - 1865-0929 SN - 1865-0937 VL - 318 SP - 77 EP - 80 PB - Springer AN - OPUS4-27550 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Wrobel, Norma T1 - Safety and Security, Dealing with Risks T2 - 7th FutureSecurity CY - Bonn, Germany DA - 2012-09-04 PY - 2012 AN - OPUS4-27496 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Wrobel, Norma A1 - Pfeil, Norbert A1 - Sudy, Irene T1 - Das Verständnis von Risiko und dessen Einschätzung T2 - DACH-Jahrestagung DGZfP CY - Graz, Austria DA - 2012-09-17 PY - 2012 AN - OPUS4-27497 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Zscherpel, Uwe A1 - Ewert, Uwe T1 - Bildbearbeitung; automatische Eigenschaftserkennung versus visuelle Bearbeitung T2 - DACH-Jahrestagung DGZfP CY - Graz, Austria DA - 2012-09-17 PY - 2012 AN - OPUS4-27498 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Wrobel, Norma T1 - Approaching an understanding of risk: a subject for the EFNDT Working Group 5 "NDT Technology for Public Security and Safety" T2 - 3rd EFNDT WG5 Workshop "NDT Technology for Public Security and Safety" CY - Berlin, Germany DA - 2012-10-22 PY - 2012 AN - OPUS4-27499 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Wrobel, Norma T1 - Risk assessment techniques samples T2 - 3rd EFNDT WG5 Workshop "NDT Technology for Public Security and Safety" CY - Berlin, Germany DA - 2012-10-22 PY - 2012 AN - OPUS4-27500 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt T1 - EFNDT Working Group 5, from mines to any kind of threats T2 - 3rd EFNDT WG5 Workshop "NDT Technology for Public Security and Safety" CY - Berlin, Germany DA - 2012-10-22 PY - 2012 AN - OPUS4-27501 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt T1 - Security research and expertise at the BAM Federal Institute for Materials Research and Testing T2 - Archimedes first End-User and Operator Driven Roundtable: Towards More Efficient Civil Aviation Security? CY - Berlin-Schönhagen, Germany DA - 2012-12-03 PY - 2012 AN - OPUS4-27502 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Zscherpel, Uwe T1 - Ways of digital image processing to obtain fast and unbiased results N2 - The ultimate purpose of digital image filtering is to support the visual identification of certain features expressed by characteristic shapes and patterns. Numerous recipes, algorithms and ready made programs exist nowadays that predominantly have in common that users have to set certain parameters. Particularly if processing is fast and shows results rather immediately, the choice of parameters may be guided by making the image 'looking nice'. However, in practical situations most users are not in a mood to 'play around' with a displayed image, particularly if they are in a stressy situation as it may encountered in security applications. The requirements for the application of digital image processing under such circumstances will be discussed with an example of automatic filtering without manual parameter settings that even entails the advantage of delivering unbiased results. T2 - 18th WCNDT - World conference on nondestructive testing CY - Durban, South Africa DA - 2012-04-16 KW - Digital Image Processing KW - Digital filter KW - Filter parameter KW - Unbiased image processing KW - Security PY - 2012 SN - 978-0-620-52872-6 SP - 1 EP - 10 (Paper 284) AN - OPUS4-25875 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Wrobel, Norma T1 - Approaching an understanding of risk: a subject for the EFNDT working group 5 'NDT technology for public security and safety' N2 - Safety and security both entail freedom from danger, i.e. unacceptable risk, whatever the cause might be. This entails an understanding of the term 'risk' that is broadly used in areas such as economics, health, insurance etc. According a rather popular definition used in the economical sciences for a long time (KNIGHT), risk has a lot in common with uncertainty while the former is regarded quantifiable and the latter one is not. However, it has to be taken into account that there are other understandings of 'uncertainty'. Particularly encountering rare events never experienced before and recent contemporary definitions are weakening Knightfs differentiation. This is reflected in some recent standard definitions. Attempts have been made to define a risk as common as possible covering not only societal, ecological and financial areas but also natural and technical, ones. This is of particular concern in non-destructive testing. This raises the question how far this can be achieved in a common understanding, i.e. the discussion on this term seems not at all finished yet. It is a common ambition to lower the risk by several actions including detection technologies. This entails that a risk could be estimated somehow. The existence of numerous approaches indicates the complexity of this question. The EFNDT (European Federation for Non-Destructive Testing) Working Group 5 took a commitment also to tackle this central aspect of safety and security in its understanding as a bridging forum between these two areas. T2 - 18th WCNDT - World conference on nondestructive testing CY - Durban, South Africa DA - 2012-04-16 KW - Risk definition KW - Risk assessment KW - Vocabulary standards KW - EFNDT Working Group 5 (WG5) PY - 2012 SN - 978-0-620-52872-6 SP - 1 EP - 8 (Paper 474) AN - OPUS4-25876 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Osterloh, Kurt A1 - Bücherl, T. A1 - Zscherpel, Uwe A1 - Ewert, Uwe T1 - Image recovery by removing stochastic artefacts identified as local asymmetries N2 - Stochastic artefacts are frequently encountered in digital radiography and tomography with neutrons. Most obviously, they are caused by ubiquitous scattered radiation hitting the CCD-sensor. They appear as scattered dots and, at higher frequency of occurrence, they may obscure the image. Some of these dotted interferences vary with time, however, a large portion of them remains persistent so the problem cannot be resolved by collecting stacks of images and to merge them to a median image. The situation becomes even worse in computed tomography (CT) where each artefact causes a circular pattern in the reconstructed plane. Therefore, these stochastic artefacts have to be removed completely and automatically while leaving the original image content untouched. A simplified image acquisition and artefact removal tool was developed at BAM and is available to interested users. Furthermore, an algorithm complying with all the requirements mentioned above was developed that reliably removes artefacts that could even exceed the size of a single pixel without affecting other parts of the image. It consists of an iterative two-step algorithm adjusting pixel values within a 3 × 3 matrix inside of a 5 × 5 kernel and the centre pixel only within a 3 × 3 kernel, resp. It has been applied to thousands of images obtained from the NECTAR facility at the FRM II in Garching, Germany, without any need of a visual control. In essence, the procedure consists of identifying and tackling asymmetric intensity distributions locally with recording each treatment of a pixel. Searching for the local asymmetry with subsequent correction rather than replacing individually identified pixels constitutes the basic idea of the algorithm. The efficiency of the proposed algorithm is demonstrated with a severely spoiled example of neutron radiography and tomography as compared with median filtering, the most convenient alternative approach by visual check, histogram and power spectra analysis. KW - Data processing methods KW - Image filtering KW - Pattern recognition KW - Cluster finding KW - Calibration and fitting methods PY - 2012 DO - https://doi.org/10.1088/1748-0221/7/04/C04018 SN - 1748-0221 VL - 7 IS - April SP - 1 EP - 14 PB - Inst. of Physics Publ. CY - London AN - OPUS4-25877 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Zscherpel, Uwe T1 - Ways of Digital Image Processing to Obtain Fast and Unbiased Results T2 - 18th World Conference on NDT (WCNDT 2012) CY - Durban, South Africa DA - 2012-04-16 PY - 2012 AN - OPUS4-26655 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Bücherl, T. A1 - Zscherpel, Uwe A1 - Ewert, Uwe T1 - Selective removal of stochastic artefacts from digigal neutron radiographic images T2 - FNDA 2011, Fast Neutron Detectors and Applications, 2 nd international Workshop CY - Ein-Gedi, Israel DA - 2011-11-06 PY - 2011 AN - OPUS4-25092 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Wrobel, Norma A1 - Ewert, Uwe A1 - Krstelj, V. A1 - Zvizdic, D. T1 - Repositioning of the EFNDT WG 5 T2 - Croatian Society of NDT, MATEST 2011 CY - Split, Croatia DA - 2011-11-02 PY - 2011 AN - OPUS4-25096 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Wrobel, Norma A1 - Ewert, Uwe A1 - Krstelj, V. A1 - Zvizdic, D. T1 - Repositioning of the EFNDT WG 5 T2 - Croatian Society of NDT, MATEST 2011 CY - Split, Croatia DA - 2011-11-02 PY - 2011 AN - OPUS4-25098 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt T1 - EFNDT Marine Forum T2 - Croatian Society of NDT, Constitutive Meeting of the EFNDT Marine Non-Destructive Forum CY - Split, Croatia DA - 2011-11-03 PY - 2011 AN - OPUS4-25099 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Wrobel, Norma A1 - Fratzscher, Daniel A1 - Jechow, Mirko A1 - Zscherpel, Uwe A1 - Ewert, Uwe T1 - Einstrahlgeometrie und Erkennbarkeit von Objekten in der Röntgenrückstreuradiographie N2 - Abweichend von der gängigen Vorgehensweise, mit einem Bleistiftstrahl die Lage eines Bildpunktes festzulegen und die rückgestreute Strahlung großflächig aufzunehmen, bietet die neu entwickelte Kamera Unabhängigkeit von Einstrahl- und Blickrichtung. Ausgestattet mit einer 'Optik' für hochenergetische Strahlung, wie die bereits beschriebene Schlitzblendenkamera, ist die variable Gestaltung von Einstrahl- und Blickrichtung möglich. Damit eröffnet sich die Chance, Strahlung absorbierende Details in einem Objekt sichtbar werden zu lassen, die sonst von einer streuenden Umgebung überstrahlt würden. Zudem wird gezeigt, wie sich das Erscheinungsbild von Objekten umgebungsbedingt im Rückstreubild ändern kann. T2 - DGZfP-Jahrestagung 2011 CY - Bremen, Deutschland DA - 30.05.2011 KW - Röntgenrückstreuradiographie KW - Schlitzblendenkamera KW - Varibale Einstrahlgeometrie PY - 2011 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-250627 SN - 978-3-940283-33-7 IS - DGZfP-BB 127 (Poster 20) SP - 1 EP - 5 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) AN - OPUS4-25062 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -