TY - CONF A1 - Beutel, R. A1 - Reinhardt, H.-W. A1 - Grosse, C. U. A1 - Glaubitt, A. A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Algernon, Daniel A1 - Wiggenhauser, Herbert A1 - Schickert, M. T1 - Performance Demonstration of Non-Destructive Testing Methods T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - NDT-CE KW - Concrete KW - Ultrasonic echo KW - Impact-echo KW - Radar KW - Concrete cover of tendon ducts KW - Thickness measurement KW - Concrete slabs PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 9(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-14382 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hachenberger, Y. U. A1 - Rosenkranz, Daniel A1 - Kromer, C. A1 - Krause, B. C. A1 - Dreiack, N. A1 - Kriegel, F. L. A1 - Kozmenko, E. A1 - Jungnickel, H. A1 - Tentschert, J. A1 - Bierkandt, F. S. A1 - Laux, P. A1 - Panne, Ulrich A1 - Luch, A. T1 - Nanomaterial Characterization in Complex Media - Guidance and Application N2 - A broad range of inorganic nanoparticles (NPs) and their dissolved ions possess a possible toxicological risk for human health and the environment. Reliable and robust measurements of dissolution effects may be influenced by the sample matrix, which challenges the analytical method of choice. In this study, CuO NPs were investigated in several dissolution experiments. Two analytical techniques (dynamic light scattering (DLS) and inductively-coupled plasma mass spectrometry (ICP-MS)) were used to characterize NPs (size distribution curves) time-dependently in different complex matrices (e.g., artificial lung lining fluids and cell culture media). The advantages and challenges of each analytical approach are evaluated and discussed. Additionally, a direct-injection single particle (DI sp)ICP-MS technique for assessing the size distribution curve of the dissolved particles was developed and evaluated. The DI technique provides a sensitive response even at low concentrations without any dilution of the complex sample matrix. These experiments were further enhanced with an automated data evaluation procedure to objectively distinguish between ionic and NP events. With this approach, a fast and reproducible determination of inorganic NPs and ionic backgrounds can be achieved. This study can serve as guidance when choosing the optimal analytical method for NP characterization and for the determination of the origin of an adverse effect in NP toxicity. KW - Nanon KW - Characterization KW - SpICP-MS KW - Matrix KW - Dissolution PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-572138 DO - https://doi.org/10.3390/nano13050922 VL - 13 IS - 5 SP - 1 EP - 19 AN - OPUS4-57213 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hachenberger, Y. U. A1 - Rosenkranz, D. A1 - Kriegel, Fabian L. A1 - Krause, B. A1 - Matschaß, René A1 - Reichardt, P. A1 - Tentschert, J. A1 - Laux, P. A1 - Jakubowski, Norbert A1 - Panne, Ulrich A1 - Luch, A. T1 - Tackling Complex Analytical Tasks: An ISO/TS-Based Validation Approach for Hydrodynamic Chromatography Single Particle Inductively Coupled Plasma Mass Spectrometry N2 - Nano-carrier systems such as liposomes have promising biomedical applications. Nevertheless, characterization of these complex samples is a challenging analytical task. In this study a coupled hydrodynamic chromatography-single particle-inductively coupled plasma mass spectrometry (HDC-spICP-MS) approach was validated based on the technical specification (TS) 19590:2017 of the international organization for standardization (ISO). The TS has been adapted to the hyphenated setup. The quality criteria (QC), e.g., linearity of the calibration, transport efficiency, were investigated. Furthermore, a cross calibration of the particle size was performed with values from dynamic light scattering (DLS) and transmission electron microscopy (TEM). Due to an additional Y-piece, an online-calibration routine was implemented. This approach allows the calibration of the ICP-MS during the dead time of the chromatography run, to reduce the required time and enhance the robustness of the results. The optimized method was tested with different gold nanoparticle (Au-NP) mixtures to investigate the characterization properties of HDC separations for samples with increasing complexity. Additionally, the technique was successfully applied to simultaneously determine both the hydrodynamic radius and the Au-NP content in liposomes. With the established hyphenated setup, it was possible to distinguish between different subpopulations with various NP loads and different hydrodynamic diameters inside the liposome carriers. KW - Single particle ICP-MS KW - Nanoparticle characterization KW - Nano-carrier KW - Iposomes KW - Hydrodynamic chromatography (HDC) KW - Validation PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-506609 DO - https://doi.org/10.3390/ma13061447 VL - 13 IS - 6 SP - 1 EP - 14 CY - Basel, Switzerland AN - OPUS4-50660 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weiler, L. A1 - Pfingsten, J. A1 - Eickhoff, H. A1 - Geist, I. A1 - Hilbig, H. A1 - Hornig, U. A1 - Kalbe, Ute A1 - Krause, K. A1 - Kautetzky, D. A1 - Linnemann, V. A1 - Gschwendtner, M. A1 - Lohmann, D. A1 - Overeem-Bos, E. A1 - Schwerd, R. A1 - Vollpracht, A. T1 - Improving consistency at testing cementitious materials in the Dynamic Surface Leaching Test on the basis of the European technical specification CENTS 16637–2 – Results of a round robin test N2 - The environmental impact assessment of materials is usually based on laboratory tests, mostly in combination with models describing the longterm fate of the substances of interest in the targeted environmental compartment. Thus, laboratory tests are the fundamental link to achieve appropriate assessment conclusions which makes it essential to generate consistent results. This just as applies to the leaching of cementitious materials. In Europe, the leaching behavior of monolithic building materials is tested in the Dynamic Surface Leaching Test following the specification CEN/TS 16637–2. An interlaboratory comparison on European level regarding this technical specification showed relatively high intra- and interlaboratory variations for the tested materials (monolithic copper slag and cement stabilized coal fly ash). Therefore the German Committee for Structural Concrete (DAfStb) framed a guideline to specify additional testing conditions for cementitious materials. To assess the possible improvement by this guidelines measures, a round robin test with 11 participants from Germany and the Netherlands was conducted. This work aims to provide insight into the factors to be considered in the testing of alkaline materials, including sample preparation, and highlights crucial procedures and their manifestation in the results. All evaluated parameters showed improved results compared to the earlier round robin test. The relative standard deviations for repeatability (RSDr) and reproducibility (RSDR) of the elements calcium, barium, antimony, chromium, molybdenum and vanadium, which are the parameters evaluated in both round robin tests, were RSDr = 4%, 4%, 2%, 5%, 5%, and 5% respectively (4% in average) for this work, in comparison to the European round robin test with an average RSDr of 29% (17%, 17%, 20%, 40%, 36%, and 42%). The RSDR improved from 41% (30%, 36%, 29%, 57%, 40%, and 56%) to 14% (12%, 8%, 6%, 28%, 15%, and 12%). CO2 ingress during testing and the inaccuracy of eluate analytics for concentrations close to the determination limits were identified as the main sources of error. KW - Environmental assessment KW - Leaching KW - Heavy metals KW - Round robin test KW - Building Material PY - 2022 DO - https://doi.org/10.1016/j.jenvman.2022.114959 SN - 0301-4797 VL - 314 SP - 1 EP - 9 PB - Elsevier CY - Amsterdam AN - OPUS4-54647 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kaudelka, Sven A1 - Knaust, Christian A1 - Krause, U. T1 - Ansätze zur numerischen Berechnung von Brandeinwirkungen auf Bauteile N2 - Bei der Erstellung von brandschutztechnischen Nachweisen für Industriebauten werden häufig Ingenieurmethoden des Brandschutzes genutzt. Dazu zählen die Modellierung und Berechnung von Brandszenarien mittels numerischer Strömungsmechanik (computational fluid dynamics, CFD). In dieser Arbeit wurde ein auf numerischer Strömungs- und Strukturmechanik basierendes Verfahren zur brandschutztechnischen Bemessung von Bauteilen am Beispiel einer Industriehalle angewendet. Instationäre Temperaturverläufe aus der Heißgasschicht dienten dabei als Eingangswerte für die Bauteilberechnung. Aus den Ergebnissen wurde die äquivalente Branddauer berechnet, mit der die rechnerisch erforderlichen Feuerwiderstandsdauern der Bauteile bestimmt werden konnte. KW - Äquivalente Branddauer KW - Brandschutz im Industriebau KW - Feuerwiderstandsdauer KW - Numerische Strömungsmechanik KW - Numerische Strukturmechanik PY - 2016 DO - https://doi.org/10.1002/cite.201500174 SN - 1522-2640 SN - 0009-286X VL - 88 IS - 8 SP - 1157 EP - 1168 PB - Wiley CY - Weinheim AN - OPUS4-38179 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Werrel, Martin A1 - Deubel, Jan A1 - Krüger, Simone A1 - Hofmann-Böllinghaus, Anja A1 - Krause, U. T1 - The calculation of the heat release rate by oxygen consumption in a controlled-atmosphere cone calorimeter N2 - The standard cone calorimeter according to ASTM E 1354 and ISO 5660 enables reaction-to-fire tests to be performed in ambient atmospheric conditions. A controlled-atmosphere chamber modifies the standard apparatus in a way that allows tests to be performed in nonambient conditions as well. The enclosed chamber is placed underneath the standard exhaust hood and does not have a closed connection to the hood. With this open arrangement, the exhaust gases are diluted by excess air drawn in from the laboratory surroundings. Heat-induced changes in the consequential dilution ratio affect the calculation of fire quantities and, when neglected, lead to deviations of up to 30% in heat release rate. The paper introduces a test protocol and equations to calculate the heat release rate taking dilution effects into account. A mathematical correction is shown that compensates for the dilution effects while avoiding extensive mechanical changes in the equipment. KW - Controlled-atmosphere cone calorimeter KW - Heat release rate KW - Oxygen consumption KW - Cone calorimeter KW - Vitiation and ventilation control KW - Excess air PY - 2014 DO - https://doi.org/10.1002/fam.2175 SN - 0308-0501 SN - 1099-1018 VL - 38 IS - 2 SP - 204 EP - 226 PB - Heyden CY - London AN - OPUS4-30317 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kaudelka, Sven A1 - Hofmann-Böllinghaus, Anja A1 - Hauswaldt, S. A1 - Krause, U. T1 - Auswirkung von Zündquellen und Systembeschaffenheit auf das Brandverhalten EPS-basierter Wärmedämm-Verbundsysteme N2 - Gegenstand des Aufsatzes ist die experimentelle Untersuchung der Auswirkungen verschiedener Zündquellen sowie der Systembeschaffenheit auf das Brandverhalten EPS-basierter Wärmedämm-Verbundsysteme (WDVS). Dazu wurden Brände ausgewertet, die mit EPS-basierten WDVS in Verbindung stehen. Ergebnis dieser Auswertung war, dass nicht wie bisher angenommen der Brand in dem Gebäude (z. B. der Wohnungsbrand), sondern vielmehr der Brand außerhalb des Gebäudes, insbesondere der des Abfallbehälters, das häufigste und kritischste Brandszenario für EPS-basierte WDVS darstellt. Daraufhin wurden an der BAM Bundesanstalt für Materialforschung und -prüfung Brandversuche in der Single Burning Item-Prüfeinrichtung (SBI) an nicht intakten EPS-basierten WDVS-Ausschnitten durchgeführt. Mit zunehmender Beschädigungsgröße und -tiefe stieg die vom System freigesetzte Wärmefreisetzungsrate an. Zusätzlich werden Brandversuche eines Sockelbrandszenarios mit einer abfallbehälteräquivalenten Brandlast vorgestellt. Aus den Brandversuchen werden Empfehlungen zur Verbesserung der Systemsicherheit abgeleitet.------------------------------------------------------------------------------------------------------------------------------------------------- The influence of different ignition sources and conditions of the systems on the fire behaviour of external thermal insulating systems (ETICS) have been investigated experimentally. As a basis of the investigations real cases with EPS based ETICS have been analysed. The analysis showed that the fire in front of the building is the most common and critical fire scenario for these systems. These fires are often caused by waste containers. This result contradicts the former common assumption that the fire inside the building is the most critical fire scenario for ETICS. Intermediate scale experiments in the Single Burning Item (SBI) test apparatus have been performed at BAM with ETICS specimens. The render of the systems was partially damaged. The measured heat release rate of the specimens increased significantly with size and depths of the damages. Additionally results of large scale experiments with a waste container equivalent ignition source are presented and recommendations to enhance fire safety of these systems are given. KW - Fassaden KW - Wärmedämm-Verbundsystem (WDVS) KW - Expandiertes Polystyrol (EPS) KW - Brandverhalten von Baustoffen KW - Bemessungsbrandszenario KW - Sockelbrand KW - Abfallbehälter KW - ET/CS KW - External thermal insulation composite system KW - Expanded polystyrene KW - Waste containers KW - Released heat rate KW - Plinths-based fire scenario KW - Single burning item test KW - Single Burning Item-Prüfeinrichtung (SBI) KW - Wärmefreisetzungsrate KW - DIBt-Empfehlung KW - Façades KW - Brandschutz - Fire protection engineering PY - 2015 DO - https://doi.org/10.1002/bapi.201510023 SN - 0171-5445 SN - 1437-0980 VL - 37 IS - 4 SP - 205 EP - 212 PB - Ernst CY - Berlin AN - OPUS4-33835 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Werrel, Martin A1 - Deubel, Jan A1 - Krüger, Simone A1 - Hofmann-Böllinghaus, Anja A1 - Antonatus, E. A1 - Krause, U. A1 - Duerler, F. T1 - Use and benefit of a controlled-atmosphere cone calorimeter N2 - A controlled-atmosphere cone calorimeter that is built by modifying the Standard apparatus with the addition of a controlled-atmosphere chamber offers a time- and cost-saving approach for reaction-to-fire testing in vitiation- and ventilation-controlled atmospheres. Due to the design of the added enclosure no mechanical changes on cone calorimeter’s Standard ductwork are required. This offers some advantages but also important limitations. The design has an open connection between the outlet of the added enclosure and the cone calorimeter’s exhaust hood. Therefore, sufficient ambient air from the laboratory surroundings is drawn into the System to introduce effects which have the potential to affect test results significantly. A procedure which is is suitable to consider physical effects of the ambient air on the calculation of the heat release rate is presented as well as initial results of an application towards toxic potency assessment. Signs for Chemical effects of the ambient air such as post reactions are shown but subject of an ongoing work. T2 - Fire and materials 2013 - 13th International conference and exhibition CY - San Francisco, CA, USA DA - 28.01.2013 KW - Controlled-atmosphere cone calorimeter KW - Heat release rate KW - Oxygen consumption KW - Smoke toxicity PY - 2013 SP - 273 EP - 286 PB - Interscience Communications CY - London, UK AN - OPUS4-27707 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geoerg, Paul A1 - Hofmann-Böllinghaus, Anja A1 - Krause, U. T1 - Comparative study of evacuation dynamics using a lecturer room N2 - Computer simulation tools were used to evaluate pedestrian movement. This study compares the reliability of three simulation tools and the calculation method by Predtetschenski und Milinski with a controlled evacuation exercise of a lecturer room. The comparison shows that each simulation tool used underestimate the total evacuation time and that an indicator for a low level of fitness does not necessarily lead to a long evacuation time. Results revealed that calibration of simulation tools is required to model heterogeneous population properly. Therefore, further experiments with a realistic, heterogeneous composition of participants have to be made. T2 - 6th international symposium on human behaviour in fire 2015 CY - Cambridge, UK DA - 28.09.2015 KW - Pedestrian KW - Simulation KW - Evacuation KW - Heterogeneous groups PY - 2015 SN - 978-0-9933933-0-3 SP - 667 EP - 670 AN - OPUS4-34549 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geoerg, Paul A1 - Rost, M. A1 - Krause, U. A1 - Hofmann-Böllinghaus, Anja T1 - Vergleichende Untersuchung zur Personensicherheit am Beispiel eines Seminarraumes N2 - Um den Anforderungen der Bauordnung an den Brandschutz für Gebäude gerecht zu werden, sind bauliche Anlagen so zu errichten und zu betreiben, dass der Entstehung eines Brandes und der Ausbreitung von Feuer und Rauch vorgebeugt, die Rettung von Menschen und Tieren sowie wirksame Löscharbeiten ermöglicht werden. Hierbei besteht, einer steigenden Komplexität sowie einem differenzierten Nutzungskonzept öffentlicher Gebäude geschuldet, häufig die Notwendigkeit von normativen Vorgaben abzuweichen und dennoch ein gleichwertiges Sicherheitsniveau nachzuweisen. Es werden Personensimulationsmodelle eingesetzt, die einerseits das Vorhandensein eines Schutzzielniveaus durch die Abbildungen von Personenbewegungen nachweisen können und andererseits durch Parametervariation eine szenarienabhängige Betrachtung ermöglichen. Der vorliegende Beitrag vergleicht die Ergebnisse einer kleinskaligen Evakuierungsübung mit drei mikroskopischen Personensimulationsmodellen und geht der Frage nach der Aussagekraft dieser Bewertungsmethode nach. Es zeigt sich, dass die alleinige Betrachtung absoluter Entleerungszeiten keine zuverlässige Beurteilungsgrundlage für das komplexe Schutzziel Personensicherheit darstellt. T2 - 4. Magdeburger Brand- und Explosionsschutztag / 3. vfdb-Workshop Brandschutzforschung CY - Magdeburg, Germany DA - 26.03.2015 KW - Evakuierung KW - Routenwahl KW - Fußgänger KW - Sicherheit KW - Simulation PY - 2015 SN - 978-3-00-048960-0 SP - 1 EP - 13 AN - OPUS4-33123 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zinke, R. A1 - Virothi, N. A1 - Köhler, F. A1 - Klippel, A. A1 - Schalau, Sebastian A1 - Krause, U. T1 - Experimental measurement of initial evaporation mass flows from gasoline spills and comparison with empirical models N2 - In this paper, we investigate the evaporation mass flow originating from spills of gas-oline. Large spills of gasoline may form during partial or complete roof sinkings or inthe case of perforations at various deck fittings at external floating roof tanks usedfor the storage. Additionally, spills may form in the retention area in the case of leak-ages at pipes or at the hull. The aim is to predict the order of magnitude of real-scaleevaporation mass flow. The determined evaporation mass flows will be used in arelated project as input values for subsequent dispersion modeling in the vicinity ofthe tanks. This is relevant for questions of fire and explosion protection as well as forenvironmental protection aspects in tank farms or refineries, which use externalfloating roof tanks. The measurements presented in this paper were compared withpredictions by empirical models and investigations of evaporations from small floorspills, round-bottom flask, or from Petri dishes published in the literature. The maingoal of this paper is to test the applicability of empirical models to provide reasonableevaporation mass flows as input for CFD dispersion simulations. KW - Spill evaporation PY - 2019 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-504322 DO - https://doi.org/10.1002/prs.12128 VL - 39 IS - 3 SP - e12128 PB - Wiley Online Libary AN - OPUS4-50432 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schalau, Sebastian A1 - Habib, Abdel Karim A1 - Krause, U. T1 - CFD-Simulation von Schwergasausbreitungen N2 - Um die Ausbreitung von Schwergaswolken infolge störfallbedingter Freisetzungen in bebautem Gelände besser vorhersagen zu können, wird eine praxisorientierte Methode zur numerischen Simulation von Schwergasausbreitungen vorgestellt. T2 - 15. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Brunswick, Germany DA - 21.05.2019 KW - Explosionsschutz KW - CFD KW - Schwergas KW - Gasausbreitung PY - 2019 DO - https://doi.org/10.7795/210.20190521G SP - 1 EP - 10 PB - Physikalisch-Technische Bundesanstalt (PTB) AN - OPUS4-48940 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zakel, S. A1 - Schröder, Volkmar A1 - Askar, Enis A1 - Gabel, D. A1 - Hirsch, W. A1 - Kleinert, J. A1 - Krause, U. A1 - Krietsch, Arne A1 - Meistes, J. A1 - Sachtleben, A. A1 - Schmidt, Martin T1 - Sicherheitstechnische Kenngrößen des Explosionsschutzes von hybriden Stoffgemischen - Normungsfähige Bestimmungsverfahren N2 - In diesem Verbundvorhaben werden standardisierte Messverfahren für hybride Gemische erarbeitet, die der Bestimmung sicherheitstechnischer Kenngrößen des Explosionsschutzes dienen. Unter einem hybriden Gemisch wird dabei ein mehrphasiges System aus Brenngas oder brennbarem Dampf, sowie Luft und brennbarem Staub verstanden. Die Veröffentlichung der Ergebnisse erfolgt in einem Abschlussbericht und als DIN-Spezifikation (DIN SPEC). Diese DIN SPEC versetzt Prüfinstitute und Industrie in die Lage, Explosionsgefahren beim Betrieb technischer Anlagen mit hybriden Gemischen einzuschätzen und damit Prozesse sowohl sicherer als auch effizienter zu steuern. Dieses Projekt wird im Rahmen des WIPANOProgramms (Wissens- und Technologietransfer durch Patente und Normen) vom BMWi gefördert. T2 - 14. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 07.11.2019 KW - Explosionsschutz KW - Sicherheitstechnische Kenngrößen KW - Hybride Gemische KW - Normung PY - 2019 SN - 978-3-89746-220-5 SP - 73 CY - Frankfurt am Main AN - OPUS4-49954 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wu, Dejian A1 - Zhao, P. A1 - Spitzer, Stefan A1 - Krietsch, Arne A1 - Amyotte, P. A1 - Krause, U. T1 - A review on hybrid mixture explosions: Safety parameters, explosion regimes and criteria, flame characteristics N2 - The hybrid mixture of combustible dusts and flammable gases/vapours widely exist in various industries, including mining, petrochemical, metallurgical, textile and pharmaceutical. It may pose a higher explosion risk than gas/vapor or dust/mist explosions since the hybrid explosions can still be initiated even though both the gas and the dust concentration are lower than their lower explosion limit (LEL) values. Understanding the explosion threat of hybrid mixtures not only contributes to the inherent safety and sustainability of industrial process design, but promotes the efficiency of loss prevention and mitigation. To date, however, there is no test standard with reliable explosion criteria available to determine the safety parameters of all types of hybrid mixture explosions, nor the flame propagation and quenching mechanism or theoretical explanation behind these parameters. This review presents a state-of-the-art overview of the comprehensive understanding of hybrid mixture explosions mainly in an experimental study level; thereby, the main limitations and challenges to be faced are explored. The discussed main contents include the experimental measurement for the safety parameters of hybrid mixtures (i.e., explosion sensitivity and severity parameters) via typical test apparatuses, explosion regime and criterion of hybrid mixtures, the detailed flame propagation/quenching characteristics behind the explosion severities/sensitivities of hybrid mixtures. This work aims to summarize the essential basics of experimental studies, and to provide the perspectives based on the current research gaps to understand the explosion hazards of hybrid mixtures in-depth. KW - Hybrid mixtures KW - Explosion protection KW - Safety characteristics PY - 2023 DO - https://doi.org/10.1016/j.jlp.2022.104969 SN - 0950-4230 VL - 82 SP - 1 EP - 54 PB - Elsevier CY - Amsterdam AN - OPUS4-56856 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Spitzer, Stefan A1 - Askar, Enis A1 - Benke, Alexander A1 - Cloney, C. A1 - D’Hyon, S. A1 - Dufaud, O. A1 - Dyduch, Z. A1 - Gabel, D. A1 - Geoerg, P. A1 - Heilmann, V. A1 - Jankuj, V. A1 - Jian, W. A1 - Krause, U. A1 - Krietsch, Arne A1 - Mynarz, M. A1 - Norman, F. A1 - Skrinsky, J. A1 - Taveau, J. A1 - Vignes, A. A1 - Zakel, S. A1 - Zhong, S. T1 - 1st international round robin test on safety characteristics of hybrid mixtures N2 - There is no applicable existing standard for the determination of safety characteristics for hybrid mixtures. While developing a new standard in a joint research project in Germany first results from parameter studies led to a standard procedure that can be adopted by laboratories that are already testing dusts in the so called 20L-sphere with as little additional effort as necessary. In fact, one of the main objectives of this research project was to keep modifications and adjustments from the generally accepted dust testing procedures as easy and minimal as possible so as to limit potential deviations from one laboratory to another. In this first round robin test on hybrid mixtures ever, with methane as gas component and a specific corn starch as dust sample, the practicality of the whole procedure, the scattering of the results and the deviation between the testing apparatuses is investigated. This paper summarizes the experimental procedure adopted and objectives of the first round-robin phase involving three of the four original German companies, plus volunteering laboratories from Australia, Belgium, Czech Republic, France, Poland and P.R. China. The results will have an impact on the new standard and may lead to robust data for later simulation purposes. KW - Hybrid mixtures KW - 20L-sphere KW - Round robin test KW - Turbulent combustion PY - 2022 DO - https://doi.org/10.1016/j.jlp.2022.104947 SN - 0950-4230 VL - 81 SP - 1 EP - 8 PB - Elsevier CY - Amsterdam AN - OPUS4-56516 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Spitzer, Stefan A1 - Askar, Enis A1 - Benke, Alexander A1 - Janovsky, B. A1 - Krause, U. A1 - Krietsch, Arne T1 - Influence of pre-ignition pressure rise on safety characteristics of dusts and hybrid mixtures N2 - For the determination of the safety characteristics of dusts it is necessary to disperse the dust in the oxidating atmosphere (usually air). In the standard procedures for dusts this is realized by a partially evacuated explosion vessel (20L-sphere) in which the dust gets injected from a dust chamber pressurized with air. Shortly after that injection (60 ms) the dust cloud gets ignited under turbulent conditions, that are otherwise seen as almost ambient with 20 ◦C and about 1 bar (abs). While there has been a lot of research about the influence of the ignition delay time and the level of turbulence in the recent years little attention was paid to the pre–ignition pressure rise and the allowed variations in the standards. In the following work we showed that the allowed ranges for the pressures in the different dust standards influence the safety characteristics of dust alone severely. Even though hybrid mixtures are an emerging risk problem in an interconnected industry there is no standard for the determination of their safety characteristics. In this work it is shown that especially for the preparation of hybrid mixtures of flammable dust and gas the pressures after injection of the dust and the mixing procedure have a large influence on the composition of the tested mixtures and therefore on the safety characteristics. Considering both effects, wrong concentration of gas and wrong initial pressure, the discrepancy of safety characteristics from different facilities will be too big to applicable. The methods to overcome these weaknesses are also presented. KW - Hybrid mixtures KW - 20L-sphere KW - Pre-ignition pressure rise KW - Post-injection pressure drop KW - Safety characteristics KW - Mixing procedure PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-537358 DO - https://doi.org/10.1016/j.fuel.2021.122495 VL - 311 SP - 122495 PB - Elsevier Ltd. CY - Niederlande AN - OPUS4-53735 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knaust, Christian A1 - Krause, Ulrich A1 - Hofmann-Böllinghaus, Anja A1 - Schneider, U. T1 - Modeling fire scenarios in buildings with CFD N2 - In the frame of the European harmonization, new European technical standards (Eurocodes) have been developed in recent years. Classical methods, like tables and simplified analytical procedures, as well as general engineering techniques are allowed by the Eurocodes for the fire protection design. The modeling and calculation of fire scenarios with CFD (Computational Fluid Dynamics) numerical methods is one of the general engineering methods. It is nowadays still difficult to check and evaluate the CFD results for their use as technical documents for fire safety design. Analytical engineering techniques, zone models and CFD-models have been used and compared in the present work for the prediction of the fire development in a building. To solve the conservation equation for the CFD-model, the CFD-program FDS, with the mixture fraction model, and the CFD-program FLUENT, with the one step reaction model as well as with the volumetric source term model, have been used. The combustion of polyurethane is modeled in FDS by specifying the heat release rate and the stoichiometry. For the combustion in volumetric source term model, the heat release rate and the smoke release were specified with respect to the stoichiometry. The input parameter for the one step reaction model is the pyrolysis mass flow. In the one step reaction model, the transport equations for polyurethane, H₂O, N₂, O₂, CO₂, CO and C (soot) are solved and the heat of combustion is determined from the standard formation enthalpy of all the components. In volumetric source term model, the transport equation is solved for air and smoke. FDS solves the transport equation for the mixture fraction. To model the fire development, and where no literature data was available, the required material characteristics like specific heat capacity, absorption coefficient and heat of combustion were measured. In all the investigated CFD-models the heat- and species transport equation has been solved and the absorption coefficient of soot has been considered. Furthermore, the fire development has also been investigated using zone models with the programs CFAST and MRFC. Results from analytical engineering techniques (plume calculations), which were design criteria in the past, have been used as plausibility checks for the present work. The calculation results from the investigations were compared to measurements in the same building performed by the National Institute for Standards and Technology (NIST). T2 - 11th International Symposium on Fire Protection CY - Leipzig, Germany DA - 08.06.2010 KW - CFD KW - Computational fluid dynamics KW - Zone model KW - Analytical technique KW - Combustion KW - Soot model KW - FLUENT KW - FDS KW - CFAST KW - MRFC KW - Measurements PY - 2010 SN - 978-3-00-03966-2 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. SP - 1 EP - 14 PB - Vereinigung zur Förderung des Deutschen Brandschutzes (vfdb) CY - Münster AN - OPUS4-23159 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Löhnert, Andrea A1 - Monreal, Nils A1 - Knaust, Christian A1 - Hofmann-Böllinghaus, Anja A1 - Krause, U. T1 - CFD modeling approach of smoke toxicity and opacity for flaming and non-flaming combustion processes N2 - Current engineer’s methods of fire safety design include various approaches to calculate the fire Propagation and smoke spread in buildings by means of computational fluid dynamics (CFD). Because of the increased computational capacity, CFD is commonly used for prediction of time-dependent safety parameters such as critical temperature, smoke layer height, rescue times, distributions of chemical products, and smoke toxicity and visibility. The analysis of smoke components with CFD is particularly complex, because the composition of the fire gases and also the smoke quantities depends on material properties and also on ambient and burning conditions. Oxygen concentrations and the temperature distribution in the compartment affect smoke production and smoke gas toxicity qualitatively and quantitatively. For safety designs, it can be necessary to take these influences into account. Current smoke models in CFD often use a constant smoke yield that does not vary with different fire conditions. If smoke gas toxicity is considered, a simple approach with the focus on carbon monoxide is often used. On the basis of a large set of experimental data, a numerical smoke model has been developed. The developed numerical smoke model includes optical properties, production, and toxic potential of smoke under different conditions. For the setup of the numerical model, experimental data were used for calculation of chemical components and evaluation of smoke toxicity under different combustion conditions. Therefore, averaged reaction equations were developed from experimental measurements and implemented in ANSYS CFX 14.0. KW - Fire modeling KW - Fire safety KW - Computational fluid dynamics (CFD) KW - Smoke toxicity PY - 2016 DO - https://doi.org/10.1002/fam.2340 SN - 1099-1018 VL - 40 IS - 6 SP - 759 EP - 772 PB - Wiley CY - West Sussex, UK AN - OPUS4-37514 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Krause, U. A1 - Rabe, Frederik A1 - Knaust, Christian ED - Schmidt, J. T1 - Modeling fire scenarios and smoke migration in structures N2 - Mathematical modeling of physical phenomena is an attempt to create tools which can help • to predict relevant parameters of an event at its final stage, • to predict the course of a process with time, and • to quantify the influence of System parameters, boundary conditions, material properties and so forth on the process. Applied to fire modeling the aim is either to prevent the occurrence of fires or toprevent or at least mitigate their potentially harmful consequences or to be able to reconstruct the chain of events of a fire. The first two aims, of course, are far more frequently made use of than the last one. KW - Modeling fire scenarios KW - Field models KW - Fire dynamics simulator (FDS) KW - ANSYS CFX PY - 2012 SN - 978-3-527-33027-0 DO - https://doi.org/10.1002/9783527645725.ch10 IS - Chapter 10 SP - 159 EP - 177 PB - Wiley-VCH Verlag GmbH & Co. KGaA AN - OPUS4-27738 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lerena, P. A1 - Auerkari, Pertti A1 - Knaust, Christian A1 - Vela-Wallenschus, Iris A1 - Krause, U. T1 - Approaches towards a generic methodology for storage of hazardous energy carriers and waste products N2 - Energy carriers – either conventional or 'new' ones – have to be provided in large amounts to meet the requirements of permanent availability and reliable supply of electricity. Depending on their state of aggregation, energy carriers are either stored in large masses (if solid or liquid) or at elevated pressures (if gaseous). Both impose the hazard of large-scale fire, in the latter case additionally the danger of explosion or unintended release. Very similar hazards occur for wastes. Solid wastes are present in large masses and only a small part is recycled. Most of the solid wastes are used in energy conversion. The main gaseous waste is CO2. During capturing also the hazard of unintended release exists. In this article, existing approaches for safe storage and fire prevention are discussed and a generic methodology is outlined. This methodology consists of the following steps: - gaining knowledge about the behaviour of the material stored (reactivity, thermal stability, etc.), - assessing the environmental conditions for the storage site (neighbourhood, safety distances, etc.), - assessment of prospective consequences of an incident and - development of individual loss prevention conceptions. All steps require both experimental testing and theoretical considerations about accident scenarios as integral parts of the methodology. KW - Storage KW - Hazardous materials KW - Energy carriers PY - 2013 DO - https://doi.org/10.1080/13669877.2012.729524 SN - 1366-9877 SN - 1466-4461 N1 - Geburtsname von Vela-Wallenschus, Iris: Vela, I. - Birth name of Vela-Wallenschus, Iris: Vela, I. VL - 16 IS - 3-4 SP - 433 EP - 445 PB - Taylor & Francis CY - London [u.a.] AN - OPUS4-26882 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Löhnert, Andrea A1 - Rabe, Frederik A1 - Knaust, Christian A1 - Krause, U. T1 - Numerical and experimental investigation of fire smoke toxicity N2 - To predict the toxic hazards of fire smoke the concept of the Fractional Effective Dose (FED) is used (ISO13571 2012, ISO13344 2004). The Fractional Effective Doses of the main components from the fire smoke (CO, CO2, HCN etc.) are formed for every minute of the exposure interval and then summed up. If the sum of all doses over the exposure time reaches the value 1, incapacitation or death occurs (ISO13571 2012). T2 - International congress ' Fire computer modeling' CY - Cantabria, Spain DA - 18.10.2012 PY - 2012 SN - 978-84-86116-69-9 SP - 171 EP - 188 AN - OPUS4-27893 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -