TY - GEN A1 - Krüger, Simone ED - Heinz Luck, ED - Ingolf Willms, T1 - Smoke gas analysis by Fourier transform infrared spectroscopy T2 - AUBE ´09 - 14th International conference on automatic fire detection CY - Duisburg, Germany DA - 2009-09-08 KW - Smoke gase KW - FTIR KW - Polymer KW - SBI KW - Brandschacht KW - DIN tube furnace PY - 2009 SN - 978-3-940402-01-1 VL - 1 SP - 165 EP - 172 CY - Duisburg, Germany AN - OPUS4-19848 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Smoke gas analysis of polymeric toys by Fourier transform infrared spectroscopy T2 - 14th International Conference on Automatic Fire Detection, AUBE CY - Duisburg, Germany DA - 2009-09-08 PY - 2009 AN - OPUS4-19850 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Chemical analysis of spruce wood during thermal exposure T2 - Joint Symposium on Thermal Analysis and Calorimetry, Dresden 26-28 May 2010 CY - Dresden, Germany DA - 2010-05-26 PY - 2010 AN - OPUS4-21337 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Torsions pendulum and DMA measurements of PC sticks T2 - Joint Symposium on Thermal Analysis and Calorimetry CY - Dresden, Germany DA - 2010-05-26 PY - 2010 AN - OPUS4-21338 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Thermoanalytical investigations in the Smoke Density Chamber T2 - Joint Symposium on Thermal Analysis and Calorimetry CY - Dresden, Germany DA - 2010-05-26 PY - 2010 AN - OPUS4-21339 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Thermoanalytical investigations during a car fire T2 - Joint Symposium on Thermal Analysis and Calorimetry CY - Dresden, Germany DA - 2010-05-26 PY - 2010 AN - OPUS4-21429 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pentzien, Simone A1 - Conradi, Andrea A1 - Krüger, Jörg A1 - Wurster, R. ED - M. Castillejo, ED - P. Moreno, ED - M. Oujja, ED - R. Radvan, ED - J. Ruiz, T1 - Monitoring of the laser cleaning process of artificially soiled paper N2 - Laser cleaning of soiled paper is a challenging task due to the fact that a contamination has to be removed and a fragile organic material has to be preserved. The ejection of particles forms a significant channel for the removal of unwanted surface contaminations and can be exploited for an in-situ monitoring of the cleaning procedure. 532-nm-nanosecond single and multi pulse laser cleaning of artificially soiled Whatman© paper was performed. Particles were registered with a dust monitor. These in-situ experiments were combined with ex-situ investigations of cleaning and substrate damage thresholds by means of light and scanning electron microscopic techniques. The cleaning efficiency measured by a multi-spectral imaging system was compared to the in-situ particle monitoring. Additionally, possible color changes of the paper substrate were evaluated. T2 - LACONA VII International Conference, "Lasers in the Conservation of Artworks" CY - Madrid, Spain DA - 2007-09-17 PY - 2008 SN - 978-0-415-47596-9 SP - 345 EP - 351 PB - Taylor & Francis AN - OPUS4-17974 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Jörg A1 - Pentzien, Simone A1 - Conradi, Andrea T1 - Cleaning of artificially soiled paper with 532-nm nanosecond laser radiation N2 - Cleaning of paper is a challenging task due to the fact that a contamination should be removed and a fragile organic original material has to be preserved. Pulsed laser cleaning of artificially soiled Whatman© filter paper samples serving as models for historical paper was performed. Different cleaning strategies employing 8-ns laser pulses at 532 nm wavelength were applied to clean paper avoiding undesired effects like discoloration (yellowing) and mechanical deterioration of the substrate. Multi shot experiments with low-energy pulses were compared with single pulse investigations utilizing high pulse energies achieving a constant energy load incident on the samples in both cases. The cleaning efficiency and possible yellowing effects were evaluated by means of a multi spectral imaging system. An extensive microscopic analysis of the cleaned parts of the samples provided insight into the remaining soiling on the surface and in the bulk of the paper material after laser treatment. As a reference, a hard and a soft eraser were used to clean the samples. KW - Laser cleaning KW - Paper KW - Colorimetry PY - 2008 DO - https://doi.org/10.1007/s00339-008-4476-4 SN - 0947-8396 VL - 92 IS - 1 SP - 179 EP - 183 PB - Springer CY - Berlin AN - OPUS4-17331 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Vorstellen einer Methodik für das Monitoring von Recycling-Zwischenlagern T2 - Workshop "Brandvermeidung in Recycling-Zwischenlagern" CY - Potsdam, Germany DA - 2009-01-22 PY - 2009 AN - OPUS4-18952 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Jörg A1 - Pentzien, Simone A1 - Conradi, Andrea A1 - Lußky, Katharina A1 - Engel, P. ED - Günter Wiedemann, ED - Udo Klotzbach, ED - Ulrich Bauer-Bornemann, T1 - Laserreinigung von künstlich verschmutzten europäischen Papieren des 19. Jahrhunderts N2 - Diese Arbeit beschreibt die Laserreinigung von gebräuchlichen Papieren des 19. Jahrhunderts in Kombination mit zwei Schmutzvarianten. Aufgrund der weiten Verbreitung in Bibliotheken und Kunstsammlungen wurden Hadernpapier und holzhaltiges Papier ausgewählt. Als Referenz diente Whatman-Filterpapier. Zur künstlichen Verschmutzung wurden Zeichenkohle oder Standardschmutz (Standard Test Dust SAE J 726 fine, mit Flammruß im Verhältnis 20:1 gemischt) mit Hilfe von Pinsel und Staubsauger jeweils auf die drei Papierarten aufgetragen und in den Faserverbund eingesaugt. Die Nutzung von Modellproben erweist sich für grundlegende Untersuchungen als vorteilhaft, da das Vorhandensein hinreichend großer Flächen (gleichartiger Objekte) für einen Vergleich mit Ergebnissen klassischer Reinigungstechniken unabdingbar ist. Die preiswerten Proben erlauben darüber hinaus auch die Anwendung zerstörender Analysetechniken. Für die Laserreinigungsexperimente wurde ein Nd:YAG-Laser mit Impulsdauern in der Größenordnung von 10 ns bei 532 nm Wellenlänge und einer Repetitionsrate von 500 Hz verwendet. Die Laser-Bearbeitungsstation erlaubt die flächige Bearbeitung von Objekten, wobei der Laserstrahl bewegt wird. Der Laser wird mittels Computer ferngesteuert und unter Klasse-1-Sicherheitsbedingungen betrieben. Bei der Untersuchung der Modellproben wurde jeweils die Anzahl der Impulse pro Probenstelle sowie die Laser-Energiedichte variiert. Ziel der Arbeiten war die Ermittlung eines Laser-Arbeitsbereiches für die Reinigung der verschiedenen Papierproben. Die Modellobjekte wurden vor und nach der Laserbehandlung mittels lichtmikroskopischer, rasterelektronenmikroskopischer und colorimetrischer Analysemethoden untersucht. T2 - Tagung "Laseranwendung in Restaurierung und Denkmalpflege" CY - Osnabrück, Deutschland DA - 2009-01-30 KW - Laserreinigung KW - Nd:YAG-Laser KW - Hadernpapier KW - Holzhaltiges Papier KW - Filterpapier KW - Mikroskopie KW - Farbmessung PY - 2009 SN - 978-3-8167-8106-6 SP - 177 EP - 189 PB - Fraunhofer IRB Verl. CY - Stuttgart AN - OPUS4-20059 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Torsionspendelmessungen an PC-Stäben zur Bestimmung eines Standards für den Schubmodul T2 - Gefta Jahrestagung CY - Giessen, Germany DA - 2009-10-07 PY - 2009 AN - OPUS4-20161 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Vergleichende DMA-Untersuchungen von PC-Stäben T2 - Gefta Jahrestagung CY - Giessen, Germany DA - 2009-10-07 PY - 2009 AN - OPUS4-20162 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Holle, H. A1 - Kautek, W. A1 - Pentzien, Simone A1 - Krüger, Jörg A1 - Mäder, M. A1 - Schreiner, M. T1 - Laser cleaning on historic picture postcards N2 - This contribution compares traditional cleaning and laser methods. Partial laser cleaning with a nanosecond pulse laser (wavelength of 532 nm) has proved very promising for future application in paper conservation-restoration. Traditional cleaning methods are not always sufficient or successful in surface cleaning of objects of art. Comparative studies of traditional paper cleaning methods and laser cleaning were made on several historic picture postcards printed with the chromolithography technique. PY - 2009 SN - 978-3-85028-490-5 SP - 189 EP - 206 PB - Berger Horn CY - Wien, Austria AN - OPUS4-20397 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pentzien, Simone A1 - Conradi, Andrea A1 - Lussky, K. A1 - Engel, P. A1 - Krüger, Jörg ED - Engel, Patricia T1 - Laser cleaning of artificially soiled paper N2 - Laser cleaning for works of art on paper might be a supplemental, noncontact method to overcome some of the limitations of traditional dry cleaning techniques. Three different types of paper (pure-cellulose filter paper, rag paper, and wood-pulp paper) were mechanically soiled with pulverized charcoal in a standardized procedure to make model samples. These samples were characterized microscopically and by means of lightness measurements using a multi-spectral imaging system. A prototype laser workstation with Laser Class I conditions for the operator was used for the cleaning experiments. For 10-ns laser pulses at a wavelength of 532 nm, a set of laser parameters was established for a successful cleaning of the samples avoiding damage to the paper substrate. Single- and multi-pulse illumination conditions were tested. An extensive microscopic analysis after laser treatment of the cleaned parts of the samples provided insight into the remaining soiling on the surface and in the bulk of the paper material. PY - 2009 SN - 978-3-85028-490-5 SP - 171 EP - 188 PB - Berger Horn CY - Wien, Austria AN - OPUS4-20398 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Anka A1 - Krüger, Simone A1 - Krause, Ulrich T1 - Chemisch-analytische Untersuchung von Brandprodukten aus verschiedenen Deponiefraktionen T2 - 4. Praxistagung Deponie 2010 CY - Hannover, Deutschland DA - 2010-11-30 KW - Recyclingstoffe KW - Zwischenlager KW - FTIR-Spektroskopie KW - Verschwelung KW - Rauchgasanalyse KW - Recycling materials KW - Intermediate storage KW - FTIR-spectroscopy KW - Smouldering KW - Analysis of smoke PY - 2010 SN - 978-3-86955-555-3 SP - 1 EP - 17(?) AN - OPUS4-22728 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Investigations on particles and smoke gas composition during smouldering of spruce wood T2 - ANAKON 2011 CY - Zurich, Switzerland DA - 2011-03-22 PY - 2011 AN - OPUS4-23407 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pentzien, Simone A1 - Conradi, Andrea A1 - Koter, Robert A1 - Krüger, Jörg ED - Engel, P. ED - Schirò, J. ED - Larsen, R. ED - Moussakova, E. ED - Kecskeméti, I. T1 - Cleaning of soiled paper model samples using short and ultrashort laser pulses N2 - Paper is one of the most important materials representing and witnessing human culture particularly as a carrier medium for text and image. As soiling hampers the reception of information, paper cleaning techniques are needed. Traditional mechanical and chemical cleaning methods are used by conservator-restorers. In some cases, a classical cleaning procedure of paper objects yields unsatisfactory results or a conventional treatment is even impossible. Especially, fragile paper objects cause problems due to mechanical instabilities. Laser cleaning as a non-contact method might be a way to overcome some of the limitations of classical cleaning techniques. Laser parameters have to be chosen to achieve removal of the soiling without influencing the artwork. Any immediate as well as long-term effects causing an irreversible change of the artwork have to be avoided. At present, most laser applications are found in stone and metal conservation, while laser treatment of complex organic materials like paper is still not fully developed for application in conservators' workshops. This contribution describes recent work of pulsed laser cleaning of soiled model samples. Pure cellulose, rag paper and wood-pulp paper were mechanically soiled with pulverized charcoal in a standardized procedure to make model samples representing essential characteristics of contaminated real-world artworks. Afterwards, model samples were cleaned using short and ultrashort laser pulses in the nanosecond and femtosecond time domain, respectively. An extensive analysis of the model samples after laser treatment using an optical microscope and a multi-spectral imaging system allows a comparison of the cleaning results obtained with both laser sources. T2 - Conference 'New Approaches to Book and Paper Conservation - Restoration' CY - Horn, Austria DA - 09.05.2011 KW - Laser cleaning KW - Ablation KW - Laser impact on surfaces KW - Paper KW - Femtosecond laser KW - Nanosecond laser PY - 2011 SN - 978-3-85028-518-6 SP - 519 EP - 532 PB - Verlag Berger, Horn CY - Vienna, Austria AN - OPUS4-23705 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Stability of poly(phenyl-1,4-phenylene vinylene) investigated by thermo- and chemilumineszenz T2 - Excited States, Photochemistry, and Application CY - Noordwijk, Netherlands DA - 1998-06-16 PY - 1998 AN - OPUS4-23144 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Chemilumineszenzuntersuchungen zur Stabilität von elektrooptischen Funktionspolymeren T2 - Präsentationsveranstaltung des Berliner Verbandes für Polymerforschung CY - Berlin, Germany DA - 1999-05-20 PY - 1999 AN - OPUS4-23147 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Chemilumineszenzuntersuchungen zur Stabilität von elektrooptischen Funktionspolymeren T2 - GDCh Fachgruppe Makromolekulare Chemie CY - Mainz, Germany DA - 1998-03-23 PY - 1998 AN - OPUS4-23143 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krause, Ulrich A1 - Krüger, Simone A1 - Berger, Anka T1 - Bewertung von Brandgefahr und Rauchgastoxizität bei Recyclinglagern N2 - Brände bei der Lagerung von Deponiestoffen und Recyclingprodukten sind durch hohe Wärmefreisetzung und extreme Rauchentwicklung gekennzeichnet. Im Rauch enthalten sind in Abhängigkeit vom Ausgangsmaterial toxische oder gesundheitsgefährdende Stoffe. Löscharbeiten erfordern einen hohen Personal- und Materialaufwand und ziehen sich häufig über Tage, manchmal sogar über Wochen oder Monate hin. Der Schwerpunkt im Umgang mit solchen Materialien muss deshalb auf der Brandprävention liegen. Der vorliegende Beitrag stellt eine in der Bundesanstalt für Materialforschung und -prüfung (BAM) entwickelte Methodik vor, bei der in einer Kombination von Labortests und numerischen Simulationsrechnungen Haldengeometrien und zulässige Lagerungszeiten abgeleitet werden können, bei denen Selbstentzündung sicher vermieden wird. KW - Recycling KW - Selbstentzündung KW - Toxizität KW - Rauchgas PY - 2011 SN - 2191-0073 VL - 1 IS - 1/2 SP - 32 EP - 38 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-23381 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pentzien, Simone A1 - Conradi, Andrea A1 - Krüger, Jörg T1 - The influence of paper type and state of degradation on laser cleaning of artificially soiled paper N2 - Lasers can be a supplemental tool for restorers to overcome some of the limitations of traditional dry cleaning techniques for works of art on paper. The laser working range has to be optimized allowing for safe removal of contamination and limitation of damage to the substrate. This paper addresses the influence of paper type and state of degradation on laser working range. Three types of new paper (pure cellulose, bleached pulp paper, rag paper) were degraded and characterized with respect their degree of polymerization. Laser-induced damage thresholds of new and degraded paper were determined using SEM and viscometry. Additionally, artificially soiled model samples were made using two kinds of soiling, namely pulverized charcoal and soot-blackened standard test dust. Cleaning thresholds of soiled paper samples were evaluated. A working range for all combinations of paper and soiling between 0.05 J/cm2 and 0.5 J/cm2 was found for the application of 8-ns laser pulses at 532 nm wavelength. T2 - LACONA VIII - Lasers in the Conservation of Artworks VIII CY - Sibiu, Romania DA - 21.09.2009 KW - Nanosecond laser cleaning KW - Paper KW - Ageing KW - Degree of polymerization KW - Cleaning threshold KW - Damage threshold PY - 2011 SN - 978-0-415-58073-1 SP - 59 EP - 65 PB - Taylor & Francis CY - London, UK AN - OPUS4-23634 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Analysis of toxic smoke gases using FTIR spectroscopy T2 - 9th IAFSS Symposium CY - Karlsruhe, Germany DA - 2008-09-21 PY - 2008 AN - OPUS4-18180 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Analytische Untersuchungen zur Toxizität von Rauchgasen T2 - VfdB-Jahrestagung 2009 CY - Mannheim, Germany DA - 2009-05-24 PY - 2009 AN - OPUS4-19480 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pentzien, Simone A1 - Conradi, Andrea A1 - Koter, Robert A1 - Krüger, Jörg T1 - Cleaning of artificially soiled paper using nanosecond, picosecond and femtosecond laser pulses N2 - Cleaning of cultural assets, especially fragile organic materials like paper, is a part of the conservation process. Laser radiation as a non-contact tool offers prospects for that purpose. For the studies presented here, paper model samples were prepared using three different paper types (pure cellulose, rag paper, and wood-pulp paper). Pure cellulose serves as reference material. Rag and woodpulp paper represent essential characteristics of the basic materials of real-world artworks. The papers were mechanically soiled employing pulverized charcoal. Pure and artificially soiled paper samples were treated with laser pulses of 28 fs (800 nm wavelength) and 8–12 ns (532 nm) duration in a multi pulse approach. Additionally, the cellulose reference material was processed with 30 ps (532 nm) laser pulses. Damage and cleaning thresholds of pure and soiled paper were determined for the different laser regimes. Laser working ranges allowing for removal of contamination and avoiding permanent modification to the substrate were found. The specimens prior and after laser illumination were characterized by light-optical microscopy (OM) and scanning electron microscopy (SEM) as well as multi spectral imaging analysis. The work extends previous nanosecond laser cleaning investigations on paper into the ultra-short pulse duration domain. KW - Laser cleaning KW - Ablation KW - Laser impact on surfaces KW - Paper KW - Femtosecond laser PY - 2010 DO - https://doi.org/10.1007/s00339-010-5809-7 SN - 0947-8396 VL - 101 IS - 2 SP - 441 EP - 446 PB - Springer CY - Berlin AN - OPUS4-22155 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Simone ED - Schulz, E. T1 - Rauchgasanalyse und Brandverhalten von verschiedenen Sitzmaterialien im Transportsektor T2 - 5. Internationale Expertentagung Bahnbrandschutz CY - Wien, Österreich DA - 2010-10-21 KW - Upholstered seats KW - FTIR spectroscopy KW - Combustion KW - Smouldering KW - Fire behaviour PY - 2010 SN - 978-3-940727-23-7 VL - 30 SP - 4 EP - 15 PB - IFV Bahntechnik CY - Berlin AN - OPUS4-22279 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Rauchgasanalyse und Brandverhalten von verschiedenen Sitzmaterialien im Transportsektor - ein Vergleich T2 - V. Internationale Expertentagung FIRE SAFETY IN RAIL SYSTEMS CY - Vienna, Austria DA - 2010-10-21 PY - 2010 AN - OPUS4-22271 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kautek, Wolfgang A1 - Pentzien, Simone A1 - Röllig, Mathias A1 - Rudolph, Pascale A1 - Krüger, Jörg A1 - Maywald-Pitellos, C. A1 - Bansa, H. A1 - Grösswang, H. A1 - König, E. T1 - Near-UV laser interaction with contaminants and pigments on parchment: laser cleaning diagnostics by SE-microscopy, VIS-, and IR-spectroscopy PY - 2000 SN - 1296-2074 SN - 1778-3674 VL - 1 IS - sup.1 PB - Elsevier CY - Paris AN - OPUS4-5981 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kautek, Wolfgang A1 - Pentzien, Simone A1 - Rudolph, Pascale A1 - Krüger, Jörg A1 - Maywald-Pitellos, C. A1 - Bansa, H. A1 - Grösswang, H. A1 - König, W. ED - Fotakis, C. T1 - Near-Ultraviolet Pulsed Laser Interaction with Contaminants and Pigments on Parchment: Spectroscopic Diagnostics for Laser Cleaning Safety T2 - 5th International Conference on Optics within Life Sciences CY - H¯erakleion, Greece DA - 1998-01-01 PY - 2000 SN - 3-540-66648-6 N1 - Serientitel: Optics within life sciences – Series title: Optics within life sciences IS - 5 SP - 100 EP - 107 PB - Springer CY - Berlin AN - OPUS4-6189 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Thermolumineszenz-Untersuchungen zum Alterungsprozess in Polymeren T2 - Jahrestagung der Gesellschaft für Thermische Analyse CY - Bochum, Germany DA - 2002-09-18 PY - 2002 AN - OPUS4-7266 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Chemi- und Thermolumineszenzuntersuchungen zur Stabilität von elektrolumineszierenden Funktionspolymeren T2 - Jahrestagung der Deutschen Physikalischen Gesellschaft 1997 CY - Münster, Germany DA - 1997-03-17 PY - 1997 AN - OPUS4-7257 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Investigation of the stability of poly(phenyl-1,4-phenylenevinylene), P-PPV in different polymeric matrices by chemiluminescence T2 - 5th International Conference on Methods and Applications of Fluorescence Spectroscopy CY - Kleinmachnow, Germany DA - 1997-09-21 PY - 1997 AN - OPUS4-7258 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Chemilumineszenz-Untersuchungen zur Stabilität von elektro-optischen Funktionspolymeren T2 - Jahrestagung der Gesellschaft Deutscher Chemiker 1998 CY - Mainz, Germany DA - 1998-03-23 PY - 1998 AN - OPUS4-7259 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Chemi- und Thermolumineszenz-Untersuchungen zur Stabilität von Poly(phenyl-p-phenylenvinylen), P-PPV T2 - Jahrestagung des Berliner Verbands für Polymerforschung e. V. CY - Berlin, Germany DA - 1998-05-14 PY - 1998 AN - OPUS4-7260 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Investigation of Stability of Poly(phenyl-1,4-phenylenevinylene) by Thermo- and Chemiluminescence T2 - Excited States, Photochemistry, and Application CY - Noordwijk, Netherlands DA - 1998-06-16 PY - 1998 AN - OPUS4-7261 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Untersuchungen des Degradationsprozesses von Polyolefinen bei verschiedenen Recyclingmethoden durch Chemilumineszenz und IR-Spektroskopie T2 - Umwelttagung der Gesellschaft Deutscher Chemiker 1998 CY - Karlsruhe, Germany DA - 1998-09-27 PY - 1998 AN - OPUS4-7262 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Chemiluminescence of conjugated polymers T2 - International Workshop on Practical Applications of Chemiluminescence at the Oxidation of Chemical Systems CY - Smolenice, Slovakia DA - 1998-11-02 PY - 1998 AN - OPUS4-7263 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Chemi- und Thermolumineszenz-Untersuchungen von konjugierten Polymeren T2 - Vortragsreihe "Moderne Probleme der Physikalischen Chemie" im Institut für Physikalische Chemie der Freien Universität Berlin CY - Berlin, Germany DA - 1998-12-11 PY - 1998 AN - OPUS4-7264 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Untersuchungen zur Chemi- und Thermolumineszenz von konjugierten Polymeren T2 - Disputation im Rahmen des Promotionsverfahrens am Institut für Physikalische Chemie der Freien Universität Berlin CY - Berlin, Germany DA - 1999-05-25 PY - 1999 AN - OPUS4-7265 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone A1 - Goering, Harald A1 - Stark, Wolfgang A1 - Bayerl, H. A1 - Brinkmann, P. T1 - Thermoanalytische Untersuchungen zur Phenolharzhärtung unter hohem Druck - Ein Weg zur Optimierung der Nachtemperung T2 - 3rd International Thermoset Conference CY - Iserlohn, Deutschland DA - 2005-04-21 KW - Post curing KW - High pressure DSC KW - DMA KW - Reaction kinetic KW - Phenolic resin PY - 2005 SP - 107 EP - 114 PB - Fachhochschule Südwestfalen - Hochschule für Technik und Wirtschaft CY - Iserlohn AN - OPUS4-7452 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone A1 - Goering, Harald A1 - Stark, Wolfgang A1 - Bayerl, H. A1 - Brinkmann, P. T1 - Thermo Analytical Investigations of Phenol Moulding Compound Curing - Potential for Post-Cure Optimisation T2 - 3rd International Thermoset Conference CY - Iserlohn, Germany DA - 2005-04-21 KW - Post curing KW - High pressure DSC KW - DMA KW - Reaction kinetic KW - Phenolic resin PY - 2005 SP - 219 EP - 225 PB - Fachhochschule Südwestfalen - Hochschule für Technik und Wirtschaft CY - Iserlohn AN - OPUS4-7453 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Thermoanalytische Untersuchungen zur Phenolharzhärtung unter hohem Druck - ein Weg zur Optimierung der Nachtemperung T2 - 3. Internationale Duroplasttagung CY - Iserlohn, Germany DA - 2005-04-21 PY - 2005 AN - OPUS4-7354 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schartel, Bernhard A1 - Wachtendorf, Volker A1 - Krüger, Simone A1 - Hennecke, Manfred T1 - Chemiluminescence - An advanced method for small extent, early stages and accelerated testing of the thermooxidative degradation in polymers T2 - Makromolekulares Kolloquium Freiburg CY - Freiburg im Breisgau, Germany DA - 2000-02-24 PY - 2000 SP - 45 CY - Freiburg im Breisgau AN - OPUS4-2435 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schartel, Bernhard A1 - Krüger, Simone A1 - Wachtendorf, Volker A1 - Hennecke, Manfred T1 - Chemiluminescence - A promising new testing method for plastic optical fibres? T2 - 7th International Plastic Optical Fibres Conference (POF-7) CY - Berlin, Germany DA - 1998-10-05 PY - 1998 SN - 3-905084-55-4 VL - 7 SP - 248 EP - 249 PB - AKM AG CY - Basel AN - OPUS4-2433 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Brademann-Jock, Kerstin A1 - Krüger, Simone A1 - Wachtendorf, Volker A1 - Goering, Harald T1 - Degradation effects of automotive coatings after weathering as detected by thermoluminescence T2 - 27th FATIPEC Congress CY - Aix-en-Provence, France DA - 2004-04-19 KW - Automobillacke KW - Bewitterung KW - Thermolumineszenz KW - Automotive coatings KW - Weathering KW - Thermoluminescence PY - 2004 VL - 3 SP - 1045 EP - 1050 PB - Association Francaise des Techniciens des Peintures, Vernis,Encres CY - Aix en Provence AN - OPUS4-4054 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kautek, Wolfgang A1 - Pentzien, Simone A1 - Krüger, Jörg A1 - König, E. ED - Kautek, W. ED - König, E. T1 - Laser cleaning of ancient parchments T2 - LACONA I CY - Heraklion, Crete, Greece DA - 1995-10-04 PY - 1997 SN - 3-901025-68-5 VL - 18 SP - 69 EP - 78 PB - Mayer CY - Klosterneuburg AN - OPUS4-11784 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Daminelli-Widany, Grazia A1 - Pentzien, Simone A1 - Hertwig, Andreas A1 - Krüger, Jörg T1 - Influence of film thickness on laser ablation of hydrogenated amorphous carbon films N2 - Single-pulse damage thresholds of hydrogenated amorphous carbon (a-C:H) films were measured for 8-ns laser pulses at 532-nm wavelength. Layer thicknesses from below the optical penetration depth to above the thermal diffusion length (60 nm–13 µm) were examined. After correction of the damage-threshold values for the fraction of energy effectively absorbed by the material, the damage threshold was found to increase linearly with the layer thickness, also for film thicknesses below the optical penetration depth of a-C:H. The threshold fluence reached the bulk value for a layer thickness equal to the thermal diffusion length. The thermal diffusion coefficient was obtained from fitting the experimental data. Several phenomena like graphitization, blistering, exfoliation, and ablation were observed for different fluence regimes and film thicknesses. PY - 2006 DO - https://doi.org/10.1007/s00339-005-3460-5 SN - 0340-3793 VL - 83 IS - 1 SP - 89 EP - 94 PB - Springer CY - Berlin AN - OPUS4-12022 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone A1 - Schulze, Rolf-Dieter A1 - Brademann-Jock, Kerstin A1 - Friedrich, Jörg Florian ED - Pershin, L. T1 - Introduction of irregularities into plasma polymers by radiative and auto-oxidative processes T2 - 17th International Symposium on Plasma Chemistry (ISPC-17) CY - Toronto, Canada DA - 2005-08-07 PY - 2005 SP - 1(?) EP - 6(?) CY - Toronto AN - OPUS4-11943 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Kontrolle von Aushärtungsverlauf und Aushärtegrad mittels Thermoanalyse - DSC T2 - Rohima - Die deutsche FVK-Messe - Marktplatz Forschung CY - Leipzig, Germany DA - 2006-06-27 PY - 2006 AN - OPUS4-12527 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Simone A1 - Schulze, Rolf-Dieter A1 - Brademann-Jock, Kerstin A1 - Swaraj, Sufal A1 - Friedrich, Jörg Florian T1 - Charakterisierung von Plasmapolymeren mittels Thermolumineszenzmessungen N2 - Dünne, mit einem gepulsten Plasma hergestellte Polymerschichten wurden untersucht. Diese Plasmapolymere sollten eine chemisch besser definierte Struktur haben, weil der Anteil an rein chemisch polymerisiertem Produkt während der Plasma-aus-Zeit steigen sollte, während der Anteil an Schichtbildung, der innerhalb der kurzen Plasmapulse durch Monomerfragmentierung und statistische Polyrekombination erzeugt wird, zurückgedrängt wird. Der Monomerfragmentierungsprozeß ist im kontinuierlich brennenden Plasma (cw-Mode) demgegenüber der Hauptprozeß. Neben der Anwendung der klassischen Element- und Bindungsanalysentechnik XPS (X-ray Photoelectron Spectroscopy) wurden hier die Schichten auch mittels Thermolumineszenz untersucht. Defekte und Strukturanomalitäten in Polymeren sollten mit dieser Methode charakterisiert werden können. Untersuchungsobjekte waren funktionalgruppentragende Plasmapolymerschichten, die biosensorische oder biokompatible Funktionen besitzen oder als Haftvermittler in Metall-Polymercompositen eingesetzt werden. Translated Abstract Characterization of Plasmapolymers by Thermoluminescence Thin plasma polymer films were deposited using the pulsed plasma (pp) mode. These plasma polymers should possess a more chemically regular structure because of the lower monomer fragmentation during the short plasma pulses and the chemical chain propagation during the plasma-less periods than those produced by the conventional continuous-wave (cw) mode. In addition to the use of the classic thin film characterization method XPS the method of thermoluminescence was applied to characterize defects and structural specifics in the polymer films produced by pp or cw-plasma mode. The thermoluminescence method was applied to functional groups-carrying plasma polymer layers, which are used in medical technology for forming biocompatible and bioactive coatings or in metal-polymer composites as adhesion-promoting interlayers. KW - Plasmapolymere KW - Thermolumineszenz KW - X-ray PY - 2006 DO - https://doi.org/10.1002/vipr.200600287 SN - 0947-076X SN - 1522-2454 VL - 18 IS - 3 SP - 32 EP - 37 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-12514 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Analysis of weathering effects in automotive coatings by thermoluminescence T2 - XXVIIIth FATIPEC Congress CY - Budapest, Hungary DA - 2006-06-12 PY - 2006 AN - OPUS4-12548 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Screening the weathering stability of automotive coatings by chemiluminescence T2 - XXVIIIth FATIPEC Congress CY - Budapest, Hungary DA - 2006-06-12 PY - 2006 AN - OPUS4-12549 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Simone A1 - Schulze, Rolf-Dieter A1 - Brademann-Jock, Kerstin A1 - Swaraj, Sufal A1 - Friedrich, Jörg Florian T1 - Characterisation of plasma polymers by thermoluminescence N2 - Thin plasma polymer films were deposited using the pulsed plasma mode. These plasma polymers should possess a more regular structure than those produced by the conventional continuous-wave (cw) mode, because of lower monomer fragmentation caused by the plasma pulses and the chemical chain propagation during the plasmaless (free!) periods. The thermoluminescence method was applied to functional groups carrying plasma polymer layers which are used in medical technology. Examples are formation of biocompatible, biosensoric and bioactive coatings or in metal polymer composites such as adhesion-promoting interlayers. In addition to the use of the conventional X-ray Photoelectron Spectroscopy for thin film characterization, the new method of thermoluminescence was applied to characterize undesired defects and structural specifics produced in the polymer films by pp or cw plasma mode. The main areas of focus were oxygen-containing groups produced by post-plasma oxygen introduction via auto-oxidation, oxidation of implemented unsaturations and trapped radical sites known as typical irregular structures in plasma polymers. KW - Plasma polymers KW - Thermoluminescence KW - Structure KW - Defects KW - Pulsed plasma KW - Continuous-wave plasma PY - 2006 DO - https://doi.org/10.1016/j.surfcoat.2005.12.003 SN - 0257-8972 VL - 201 IS - 3-4 SP - 543 EP - 552 PB - Elsevier Science CY - Lausanne AN - OPUS4-12818 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kautek, Wolfgang A1 - Pentzien, Simone A1 - Rudolph, Pascale A1 - Krüger, Jörg A1 - König, E. T1 - Laser interaction with coated collagen und cellulose fibre composites: fundamentals of laser cleaning of ancient parchment manuscripts and paper N2 - Laser cleaning of delicate biological composite materials such as ancient parchment manuscripts from the 15th and 16th century and printed paper from the 19th century is demonstrated with an ultraviolet excimer pulsed laser at 308 nm. Laser fluence levels must stay below the ablation and destruction threshold of the parchment or paper substrate, and have to surpass the threshold of the contaminant matter. Foreign layers to be removed must exhibit a higher optical density than the artifact substrates. Synthetic carbonaceous dirt modelled by water-soluble black crayons showed a characteristically weak featureless laser-induced plasma spectroscopy spectrum near the noise limit. It turned out that laser-induced plasma spectroscopy is of limited use in monitoring halting points (or etch-stops) because it relies on the destruction not only of the laterally inhomogenously distributed contaminant but also of pigment phases on a microscopically rough parchment substrate. Laser-induced fluorescence spectroscopy, however, promises to be a valuable non-destructive testing technique for etch-stop monitoring. KW - Laser KW - Parchment KW - Papery KW - Spectroscopy KW - Laser cleaning PY - 1998 SN - 0169-4332 SN - 1873-5584 VL - 127-129 SP - 746 EP - 754 PB - North-Holland CY - Amsterdam AN - OPUS4-11516 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rudolph, Pascale A1 - Pentzien, Simone A1 - Krüger, Jörg A1 - Kautek, Wolfgang A1 - König, E. T1 - Laserreinigung von Pergament und Papier PY - 1998 SN - 0933-4017 IS - 6 SP - 396 EP - 402 PB - Callwey CY - München AN - OPUS4-11598 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Simone A1 - Stark, Wolfgang A1 - Goering, Harald A1 - Michel, Uwe T1 - Thermoanalyse der Phenolharzhärtung - Ein Weg zur Optimierung der Nachtemperung N2 - Angesichts der spezifischen Bedeutung der Aushärtung von Phenolharzen für ihre Eigenschaften als Ingenieurwerkstoffe besteht großes Interesse an deren quantitativer Charakterisierung. Mittels DSC-Messungen unter hohem Druck (HP-DSC) kann die Vernetzungsreaktion der Phenolharzformmassen durch die Unterdrückung der Verdampfung niedermolekularer Substanzen ohne störende Überlagerungen verfolgt werden. Mittels verschiedener Vernetzungsgrade können die Einflussparameter der Aufheizrate und der Nachtemperung optimiert werden. Die Messergebnisse ermöglichen eine Modellierung der Reaktionskinetik mit dem Ziel einer verbesserten Prozessführung und Qualitätskontrolle in der industriellen Praxis. KW - Phenolharze KW - Thermische Analyse KW - DMA KW - DSC KW - Aushärtung KW - Glasübergang PY - 2006 SN - 0025-5300 VL - 48 IS - 11-12 SP - 556 EP - 561 PB - Carl Hanser Verlag CY - München AN - OPUS4-13802 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wurster, R. A1 - Pentzien, Simone A1 - Conradi, Andrea A1 - Krüger, Jörg T1 - Characterization of laser-generated microparticles by means of a dust monitor and SEM imaging N2 - Nanosecond laser (1064 nm wavelength) cleaning of artificially soiled paper as a model sample simulating a real-world artwork was performed. During the cleaning process, the ejection of particles was monitored in situ by means of a dust monitor (8 size classes, ranging from 0.3 µm to >2 µm) and ex situ using a mini-cascade impactor (MKI, 5 stages). The cleaning result was analyzed by scanning electron microscopy (SEM) considering possible laser-induced damages to the substrate. Size distributions of emitted particles were measured depending on the processing parameters: laser fluence, F, and pulse number per spot, N. High numbers of large (>2 µm) particles were collected by the mini-cascade impactor indicating a gas dynamical liftoff process. Obviously, these particles were not affected by the laser-matter interaction. The different methods (SEM, MKI, and dust monitor) are compared with respect to their usefulness for a proper interpretation of the cleaning results. PY - 2006 DO - https://doi.org/10.1155/2006/31862 SN - 0278-6273 SN - 1476-3516 VL - 2006 IS - Article ID 31862 SP - 1 EP - 5(?) PB - Harwood Academic Publ. CY - London AN - OPUS4-14467 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Simone A1 - Wachtendorf, Volker A1 - Rauth, W. T1 - Kürzer in der Klimakammer - Rasche Beurteilung der Bewitterungsstabilität von 2K-PUR-Autolacken mittels Chemilumineszenz KW - Weathering KW - Chemiluminescence KW - Degradation KW - Coatings PY - 2007 SN - 0014-7699 VL - 113 IS - 9 SP - 46 EP - 49 PB - Vincentz CY - Hannover AN - OPUS4-15786 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Engel, P. A1 - Krüger, Jörg A1 - Lußky, Katharina A1 - Pentzien, Simone T1 - Analyse häufig verwendeter europäischer Papiere. Im Fokus: Fasermaterial, Füllstoffe und Leimung N2 - Restauratoren können verschiedene Papierarten mit dem bloßen Auge aufgrund von Merkmalen in der Textur und der Oberflächenbeschaffenheit, seinem Aussehen im Durchlicht sowie an Griff und Klang grob unterscheiden. Dabei ist sich der Restaurator stets der Tatsache bewusst, dass es sich lediglich um eine erste grobe Einschätzung handeln kann. Erst bei mikroskopischen Analysen und physikalischen Experimenten treten Charakteristika zu Tage, die eine weitere Annäherung an die Zusammensetzung des Papiers und damit seiner Provenienz erlauben. Gegenstand dieser Arbeit war es, ein europäisches Hadernpapier, ein holzhaltiges Zeichenpapier und ein Whatman®-Filterpapier mit zwei mikroskopischen Methoden und einer Verbrennungstechnik zu untersuchen. Das Fasermaterial, die Füllstoffe, die Leimung und eventuelle Verunreinigungen wurden detailliert evaluiert. Neben konventioneller Lichtmikroskopie kam die weniger bekannte Umweltrasterelektronenmikroskopie (ESEM = Environmental Scanning Electron Microscopy) zum Einsatz, die neben der bildlichen Darstellung der Probenoberflächen zusätzlich eine Elementanalyse derselben gestattet. Letzteres erfordert allerdings das Vorhandensein eines zusätzlichen Röntgenspektrometers. Darüber hinaus wurden die verschiedenen Papiere trocken verascht. Es wurde eine oxidative Zerstörung der organischen Stoffe gewährleistet bis nur noch nichtbrennbare mineralische Asche zu verzeichnen war. Die Komplementarität der eingesetzten Methoden wird demonstriert und ein Einblick in die Zusammensetzung und Struktur der Papiere ermöglicht. Die Analysemethoden sind durch ihren partiell zerstörenden Charakter bzw. Limitierungen hinsichtlich der Objektgröße nur bedingt für die Untersuchung am Original geeignet, sehr wohl aber dafür, das Probenmaterial für Versuchsreihen genau zu definieren und zu standardisieren. PY - 2007 SN - 0933-4017 IS - 7 SP - 472 EP - 477 PB - Callwey CY - München AN - OPUS4-16046 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mäder, M. A1 - Holle, H. A1 - Schreiner, M. A1 - Pentzien, Simone A1 - Krüger, Jörg A1 - Kautek, Wolfgang ED - Johann Nimmrichter, ED - Kautek, Wolfgang ED - Manfred Schreiner, T1 - Traditional and laser cleaning methods of historic picture post cards T2 - LACONA VI CY - Vienna, Austria DA - 2005-09-21 KW - Laser KW - Cleaning KW - Picture Post Card PY - 2007 SN - 978-3-540-72129-1 SN - 0930-8989 N1 - Serientitel: Springer proceedings in physics – Series title: Springer proceedings in physics IS - 116 SP - 281 EP - 286 PB - Springer CY - Berlin AN - OPUS4-16378 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lerber, K. von A1 - Strlic, M. A1 - Kolar, J. A1 - Krüger, Jörg A1 - Pentzien, Simone A1 - Kennedy, C. A1 - Wess, T. A1 - Sokhan, M. A1 - Kautek, W. ED - Johann Nimmrichter, ED - Kautek, Wolfgang ED - Manfred Schreiner, T1 - Laser cleaning of undyed silk: Indications of chemical change T2 - LACONA VI CY - Vienna, Austria DA - 2005-09-21 KW - Laser KW - Cleaning KW - Silk KW - Textiles KW - Viscometry KW - X-ray diffraction KW - SIMS PY - 2007 SN - 978-3-540-72129-1 SN - 0930-8989 N1 - Serientitel: Springer proceedings in physics – Series title: Springer proceedings in physics IS - 116 SP - 313 EP - 319 PB - Springer CY - Berlin AN - OPUS4-16379 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Jörg A1 - Pentzien, Simone A1 - Lerber, K. von ED - Johann Nimmrichter, ED - Kautek, Wolfgang ED - Manfred Schreiner, T1 - Determination of a working range for the laser cleaning of soiled silk T2 - LACONA VI CY - Vienna, Austria DA - 2005-09-21 KW - Laser KW - Cleaning KW - Silk KW - Textiles PY - 2007 SN - 978-3-540-72129-1 SN - 0930-8989 N1 - Serientitel: Springer proceedings in physics – Series title: Springer proceedings in physics IS - 116 SP - 321 EP - 327 PB - Springer CY - Berlin AN - OPUS4-16380 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Chemical analysis of scorch marks during smouldering of spruce wood - Fire debris, particles and smoke gases T2 - 10 th International IAFSS Symposium CY - College Park, MD, USA DA - 2011-06-19 PY - 2011 AN - OPUS4-23954 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka A1 - Krüger, Simone A1 - Krause, Ulrich ED - Kühle-Weidemeier, M. T1 - Self-ignition of deposits containing recycling materials - an underestimated phenomenon N2 - Fires on waste dumps, surface landfills, Underground stowing or storage facilities of Recycling factories may have multiple harmful effects on individuals on site and on environment. Possibly several tens of thousands of tons flare up plunging vast areas in smoke and releasing large amounts of flue gases. Experience shows that fire fighting takes days or even weeks and moreover, as long as hidden glowing nests exist fires may break out repeatedly weeks or months later. In the light of this, fire prevention is much easier to manage than extinction. It is of internst to identify the geometrical and physical conditions under which the mid-term or long-term storage of recycling materials can be performed avoiding self-ignition. Our Guideline presents a novel method developed at BAM which combines experimental tests on lab-scale with numerical simulations in Order to obtain permissible geometries of deposits and storage times at which self-ignition can be certainly avoided (Berger 2010). T2 - Waste-to-resources 2011 - 4th International Symposium MBT & MRF CY - Hannover, Germany DA - 24.05.2011 KW - Self-ignition KW - Hot storage tests KW - Numerical simulations KW - FTIR spectroscopy KW - Guideline PY - 2011 SN - 978-3-86955-747-2 SP - 1 EP - 13 PB - Cuvillier AN - OPUS4-23920 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Chemische Brandspurenanalytik T2 - BAM Kolloquium CY - Berlin, Germany DA - 2011-11-09 PY - 2011 AN - OPUS4-24709 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Vitiated Cone Calorimeter-Experience and Characteristics T2 - Symposium on Cone Calorimeter, ISO meeting TC 92 SC3/SC4 Fire threat to people and environment CY - Ottawa, Canada DA - 2011-10-17 PY - 2011 AN - OPUS4-24600 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Rauchentwicklung und Rauchgaszusammensetzung von Photovoltaikmodulen im Brandfall T2 - VDI-Expertenforum: Photoviltaik und Brandschutz CY - Düsseldorf, Germany DA - 2011-11-17 PY - 2011 AN - OPUS4-24783 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberstein, M. A1 - Geier, M. A1 - Grießmann, H. A1 - Partsch, U. A1 - Voelkel, L. A1 - Böhme, R. A1 - Pentzien, Simone A1 - Koter, Robert A1 - Mann, Guido A1 - Bonse, Jörn A1 - Krüger, Jörg T1 - Towards an industrial laser doping process for the selective emitter using phosphoric acid as dopant N2 - Different laser supported approaches have already been realized, proving the great potential of laserdoped selective emitters (LDSE). However, it is challenging to establish a low-cost process by using pulsed laser tools. So far a single-step process only leads to satisfying results utilizing cw-lasers. In this paper we have examined a two-step process to produce laser-doped selective emitters on multicrystalline textured standard silicon photovoltaic wafers (90-Ω/sq-Emitter, SiN-antireflection coating (ARC)). The precise ARC removal by near-infrared fs-laser pulses (30 fs, 800 nm), and the doping of uncoated silicon wafers by ns-laser pulses (8 ns, 532 nm) were systematically investigated. In the fs-experiment, optimum conditions for ARC removal were identified. In the nsexperiments under suitable conditions (melting regime), the phosphorous concentration underneath the wafer surface was significantly increased and the sheet resistance was reduced by nearly a factor of two. Moreover, electrical measurements on fired metallization fingers deposited on the laser processed wafers showed low contact resistances. Hence, wafer conditioning with combined fs-laser- and ns-laser-processes are expected to be a promising technology for producing selective emitters. T2 - 26th European photovoltaic solar energy conference and exhibition CY - Hamburg, Germany DA - 05.09.2011 KW - Laser processing KW - Doping KW - Selective emitter KW - Multicrystalline silicon PY - 2011 SN - 3-936338-27-2 DO - https://doi.org/10.4229/26thEUPVSEC2011-2BV.1.2 SP - 1220 EP - 1223 AN - OPUS4-24996 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone A1 - Deubel, Jan A1 - Raspe, Tina A1 - Fettig, Ina A1 - Piechotta, Christian T1 - Chemische Brandspurenanalytik T2 - Vfdb 2012 -Jahresfachtagung CY - Köln, Deutschland DA - 2012-05-21 KW - Brandbeschleuniger KW - Brandgase KW - Brand KW - Partikel KW - Analytik PY - 2012 SP - 517 EP - 539 PB - VdS Schadenverhütung CY - Köln AN - OPUS4-25933 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Brandanalytik T2 - Arbeitstagung Brandschäden 2012 CY - Rennerod, Germany DA - 2012-05-09 PY - 2012 AN - OPUS4-25938 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Methoden der Brandspurenanalytik T2 - vfdb Jahrestagung 2012 CY - Cologne, Germany DA - 2012-05-21 PY - 2012 AN - OPUS4-25939 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - A Controlled-atmosphere Cone Calorimeter-Experiences and Characteristics T2 - Flammschutz-Workshop CY - Ludwigshafen am Rhein, Germany DA - 2011-11-28 PY - 2011 AN - OPUS4-24946 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Was ist eigentlich Rauch? Grundlagen zur Brandrauchzusammensetzung, Rauchentwicklung, Rauchgasanalytik und Rauchgastoxizität T2 - Prüfsachverständigentag 2012 CY - Kleinmachnow, Germany DA - 2012-09-28 PY - 2012 AN - OPUS4-26680 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Chemische Brandspurenanalytik in der BAM T2 - Arbeitstagung Brandspurenanalytik 2012 CY - Bautzen, Germany DA - 2012-10-01 PY - 2012 AN - OPUS4-26681 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Experimental studies on the effect of fire accelerants during living room fires T2 - Fire and Materials, 13th international Conference and Exhibition CY - San Francisco, CA, USA DA - 2013-01-28 PY - 2013 AN - OPUS4-27693 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone A1 - Deubel, Jan A1 - Werrel, Martin A1 - Fettig, Ina A1 - Raspe, Tina A1 - Piechotta, Christian T1 - Experimental studies on the effect of fire accelerant during living room fires N2 - The influence of fire accelerants on the fire behavior during living room fires was experimentally investigated by performing 5 different room fire scenarios. During the tests flre-technological quantities were determined as well as chemical-analytical studies were carried out. The focus was on the detection of smoke gases and the proof of used fire accelerants. The evaluation of traceable fire accelerants and the reconstruction of the fire development are based on a precise Chemical analysis of the combustion products. In this work an innovative methodology was developed to combine available analyticai techniques to draw conclusions from solid, liquid and gaseous fire residues about the fire process. Each ofthe fire rooms was equipped with the same living room inventory. The location and amount of fire accelerant (a mixture of diesel/gasoline) differed in 4 of 5 tests. Orte room fire experiment was carried out without fire accelerant. The following fire technological characteristics were determined during the room fire experiments: mass loss (of the complete room), temperatures (at several locations in the room), heat release and smoke gas emission (measured at three different locations: in the chimney, in the fire room and at the door opening). While the smoke gases were analysed by using Fourier Transform Infrared spectroscopy, the fire residues and swipe samples (particles) were examined by Headspace-Solid Phase Microextraction- Gaschromatography-Mass spectrometry. These procedures make it possible to detect low concentrations of volatile components of the fire accelerants. The Chemical analyticai results of the fire accelerant detection are presented. T2 - Fire and materials 2013 - 13th International conference and exhibition CY - San Francisco, CA, USA DA - 28.01.2013 KW - Accelerant KW - Chemical analysis KW - Toxicity PY - 2013 SP - 729 EP - 743 PB - Interscience Communications CY - London, UK AN - OPUS4-27708 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Experimentelle Realisierung von Brandszenarien und deren brandtechnologische Analyse T2 - Brandursachenseminar der Landespolizei Mecklenburg-Vorpommern CY - Güstrow, Germany DA - 2012-11-12 PY - 2012 AN - OPUS4-27087 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Chemisch-analytischer Nachweis von festen, flüssigen und gasförmigen Brandprodukten T2 - Brandsymposium CY - Bad Liebenstein, Germany DA - 2012-11-13 PY - 2012 AN - OPUS4-27013 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Brandtechnologische und chemisch-analytische Untersuchungen zum Einfluss von Brandbeschleunigern bei Zimmerbränden T2 - Brand- und Explosionsschutztag 2013 CY - Magdeburg, Germany DA - 2013-03-21 PY - 2013 AN - OPUS4-27916 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Teichmann, Bernd A1 - Krüger, Simone T1 - Systematische Untersuchung des Brandverhaltens und des Feuerwiderstands von Photovoltaik-Modulen einschließlich der Emissionen im Brandfall und Entwicklung eines Prüfverfahrens zum Einfluss von PV-Modulen auf die harte Bedachung N2 - In Deutschland sind z.Zt. über 1 Million PV-Anlagen am Netz [1], Immer häufiger kommen dabei Dünnschichtmodule mit toxikologisch bedenklichen Inhaltsstoffen zum Einsatz wie z.B. Cadmium, Indium oder Selen. Aber selbst die klassischen Silizium Dickschichtmodule enthalten als Kontaktmaterial signifikante Mengen an Blei. Besonders aus Sicht des Brandschutzes werfen sich vor diesem Hintergrund mehrere Fragen auf: Wie groß ist die toxikologische Gefährdung durch PV-Module im Brandfall und wie verhalten sich die Module bei einem Brand? Um hier Transparenz zu schaffen, wurden in diesem Forschungsvorhaben systematische Branduntersuchungen an verschiedenartigen Photovoltaik-Modulen durchgeführt. Als Ergebnis können Aussagen getroffen werden zu: - Brandverhalten, - Feuerwiderstand der Module einschließlich der tragenden Konstruktion, - mechanische Integrität, - Einflüsse auf die harte Bedachung sowie - Emissionen im Brandfall. T2 - Brand- und Explosionsschutztag 2013 CY - Magdeburg, Germany DA - 21.03.2013 PY - 2013 AN - OPUS4-27918 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Einfluss von Brandbeschleunigern bei Wohnzimmerbränden und deren Nachweis T2 - Ulm-Freiberger Kalorimetrietage 2013 CY - Freiberg, Germany DA - 2013-02-27 PY - 2013 AN - OPUS4-27829 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Teichmann, Bernd A1 - Krüger, Simone T1 - Systematical fire tests of PV modules - research on fire resistance, toxicology and burning behaviour N2 - At the moment more than 1 Million photovoltaic (PV) power generators are connected to the national grid in Germany1. This leads to an increasing number of estimated 300 fire accidents caused by this technology every year. Often the fire brigades deny extinguishing a burning PV generator. The fear of electric shock and poisonous heavy metals in PV solar panels refrain the firemen from doing their task. The cause of a fire of PV Systems can be the ignition of the building where the generator is mounted on, arson or technical errors in the PV modules, like strings or the inverter. T2 - Interflam 2013 - 13th International fire science & engineering conference CY - Egham, Surrey, UK DA - 24.06.2013 KW - PV modules KW - Fire resistance KW - Fire behaviour PY - 2013 SN - 978-0-9556548-9-3 SP - 105 EP - 113 PB - Interscience Communications Limited AN - OPUS4-28885 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Systematical fire tests of PV modules T2 - Interflam 2013 CY - Egham, England DA - 2013-06-24 PY - 2013 AN - OPUS4-28765 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Deubel, Jan A1 - Werrel, Martin A1 - Krüger, Simone A1 - Krause, U. T1 - Experimentelle Untersuchungen zum Einfluss von Brandbeschleuniger auf den Verlauf von Raumbränden N2 - Zur Untersuchung des Einflusses von Brandbeschleuniger auf den Verlauf von Raumbränden wurden fünf Raumbrände im Originalmaßstab durchgeführt. Die Geometrie und Ausstattung des Brandraums entsprach einem Wohnzimmer. Ein Versuch wurde mit einem Feuerzeug ohne Brandbeschleuniger gezündet. Bei den restlichen Versuchen wurde ein Benzin-Diesel-Gemisch als Brandbeschleuniger an zwei verschiedenen Orten ausgebracht und mit einer Fernzündeinrichtung gezündet. Über die Messung von Temperaturen, Strömungsgeschwindigkeiten und Gasspezieskonzentrationen wurden einfallende Strahlungswärmestromdichten, die Wärmefreisetzungsrate und die Temperaturverteilung im Brandraum bestimmt. Die Ergebnisse zeigen, dass durch die Verwendung des Brandbeschleunigers zur Zündung des Brandes die Brandentwicklung beschleunigt wurde. Die Maxima der betrachteten brandtechnologischen Größen wurden nicht beeinflusst. Der Einfluss der Brandbeschleuniger wurde aber in dem Zeitpunkt, zu dem diese Maxima auftreten, deutlich. T2 - 3. Magdeburger Brand- und Explosionsschutztag / vfdb-Workshop CY - Magdeburg, Germany DA - 21.03.2013 KW - Brandbeschleuniger KW - Raumbrand PY - 2013 SN - 978-3-00-041601-9 SP - 1 EP - 9 AN - OPUS4-27989 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Teichmann, Bernd A1 - Krüger, Simone T1 - Feuerwiderstands von Photovoltaik-Modulen einschließlich der Emissionen im Brandfall und Entwicklung eines Prüfverfahrens zum Einfluss von PV-Modulen auf die harte Bedachung T2 - 3. Magdeburger Brand- und Explosionsschutztag / vfdb-Workshop CY - Magdeburg, Germany DA - 2013-03-21 KW - Photovoltaik KW - Brandverhalten KW - Feuerwiderstand KW - Rauchgas PY - 2013 SN - 978-3-00-041601-9 SP - 1 EP - 12(?) AN - OPUS4-27990 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone A1 - Deubel, Jan A1 - Werrel, Martin A1 - Raspe, Tina A1 - Fettig, Ina A1 - Berger, Anka T1 - Brandtechnologische und chemisch-analytische Untersuchungen zum Einfluss von Brandbeschleunigern bei Zimmerbränden N2 - Anhand von 5 verschiedenen Zimmerbrandversuchen wurde der Einfluss von Brandbeschleunigern auf den Brandverlauf experimentell untersucht. Es wurden verschiedene brandtechnologische Kennwerte, wie der Massenverlust des gesamten Brandraums, Brandraumtemperaturen, die Wärmefreisetzungen sowie die Rauchgasemissionen ermittelt und beurteilt. Die Rauchgasanalyse erfolgte im Schlot, im Brandraum sowie in der Brandraumöffnung mittels Fourier Transformierte Infrarot-FTIR-Spektroskopie. Neben diesen brandtechnologischen Untersuchungen erfolgten auch chemisch-analytische Untersuchungen nach dem Brand, mit dem Ziel, den eingesetzten Brandbeschleuniger nachzuweisen. Im Anschluss an die jeweiligen Zimmerbrandversuche wurden verschiedene Brandrückstandsproben aus dem Brandschutt, Wischproben von den Wänden und den übriggebliebenen Gegenständen sowie Proben in Form von Adsorbensmaterialien und Tenax-Röhrchen genommen und mit Hilfe der HSSPME-GC-MS-Methode (Headspace-Solid Phase Micro Extraction-Gas Chromatographie-Massenspekrometrie) in Hinblick eines möglichen Brandbeschleunigernachweis analysiert. T2 - 3. Magdeburger Brand- und Explosionsschutztag / vfdb-Workshop CY - Magdeburg, Germany DA - 21.03.2013 KW - Analytik KW - Brandbeschleuniger KW - Raumbrand PY - 2013 SN - 978-3-00-041601-9 SP - 1 EP - 10 AN - OPUS4-27991 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kotsifaki, D.G. A1 - Zekou, L. A1 - Pentzien, Simone A1 - Krüger, Jörg A1 - Serafetinides, A.A. ED - Saunders, D. ED - Strlic, M. ED - Korenberg, C. ED - Luxford, N. ED - Birkhölzer, K. T1 - Cleaning of artificially soiled papers by infrared and mid-infrared lasers N2 - One of the most important materials presenting and witnessing human culture is paper. The cleaning of paper is often necessary because contamination must be removed so that the fragile organic substrate can be preserved. The conventional cleaning methods are mechanical or involve the application of chemicals. These methods can damage drawings or print layers to some extent or make the original paper substrate brittle. More specifically, the use of a scalpel blade can cause damage to fibers. Chemical cleaning is difficult to perform locally, can dissolve foreign matter that then migrates into the paper substrate, or involves volatile organic compounds that can be harmful to the conservator. There is, therefore, a need for new conservation technologies aimed at the safe cleaning of paper. Lasers have proved to be an appropriate tool for cleaning as the energy dose and penetration depth at the specific point of contamination can be controlled. Additionally, if used properly, laser cleaning is not destructive to the paper. T2 - LACONA IX - Lasers in the conservation of artworks CY - London, UK DA - 07.09.2011 KW - Laser cleaning KW - Paper KW - Artificial soiling KW - Nanosecond laser KW - Microsecond laser PY - 2013 SN - 978-1-904982-87-6 SP - 219 EP - 221 PB - Archetype publications Ltd. AN - OPUS4-27956 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mohamed, Zeinab A1 - Krüger, Simone A1 - Friedrich, Jörg Florian T1 - Deposition of thick polymer or inorganic layers with flame-retardant properties by combination of plasma and spray processes N2 - Mixtures of hexamethyldisiloxane (HMDSO) and oxygen have been used for deposition of SiO2-like layers by plasma polymerization under low-pressure conditions onto polyethylene and polystyrene used as basecoat. Water glass was cast onto these 0.5 pm plasma thick siloxane-like layers with a thickness of 5 to 40 mu m. The adhesion of these bilayer systems and their flame resistance were tested. The effect of different plasma parameters such as monomer/gas ratio, pressure and power input into the discharge on the deposition rate and the composition of the formed layers was studied. Characterization and chemical composition of the formed films were performed using infrared, X-ray photoelectron and solid state nuclear magnetic resonance spectroscopy. Peel strengths of composites were measured and the locus of peel front propagation was detected. Thermal properties of composites were analyzed by thermo-gravimetric analysis. Finally, the fire-retardant properties of thick coated polymers were determined by exposure to flames and the behavior of coatings on the polymers during flaming was observed visually. T2 - 3. Magdeburger Brand- und Explosionsschutztag / vfdb-Workshop CY - Magdeburg, Germany DA - 21.03.2013 KW - Polymer KW - Plasmatechnologie KW - Analytik PY - 2013 SN - 978-3-00-041601-9 SP - 1 EP - 11 AN - OPUS4-27988 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Chemische Brandspurenanalytik T2 - Workshop Chemische Brandspurenanalytik, BAM CY - Berlin, Germany DA - 2013-04-09 PY - 2013 AN - OPUS4-28035 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Kohlenmonoxiduntersuchungen beim Grillen mit verschiedenen Grillkohlearten T2 - BfR Symposium "Bewertungen von Vergiftungen" CY - Berlin, Germany DA - 2012-11-29 PY - 2012 AN - OPUS4-27365 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Quantitative Rauchgasanalyse bei Raumbränden T2 - ANAKON 2013 CY - Essen, Germany DA - 2013-03-04 PY - 2013 AN - OPUS4-27821 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Kalorimetrische Untersuchungen bei Raumbränden T2 - Ulm-Freiberger Kalorimetrietage 2013 CY - Freiberg, Germany DA - 2013-02-27 PY - 2013 AN - OPUS4-27827 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Welche energetischen und stofflichen Gefahren gehen von Raumbränden aus? T2 - vfdb Jahrestagung 2013 CY - Weimar, Germany DA - 2013-05-27 PY - 2013 AN - OPUS4-28579 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone A1 - Deubel, Jan A1 - Werrel, Martin A1 - Raspe, Tina T1 - Welche stofflichen und energetischen Gefahren gehen von Wohnzimmerbränden aus? N2 - Welche stofflichen und energetischen Gefahren während und nach einem Wohnzimmerbrand auftreten können, werden im Rahmen dieses Vortrages vorgestellt. Im Mittelpunkt stehen dabei die Rauchgasentwicklung, die Wärmefreisetzung, die entstehenden Rauchgastemperaturen sowie die Rauchgaszusammensetzung. In den Einrichtungen der Gesellschaft für Materialforschung und Prüfungsanstalt für das Bauwesen Leipzig mbH (MFPA) wurden dazu fünf verschiedene Wohnzimmerbrandversuche durchgeführt. Die Modell-Zimmer wurden jeweils mit dem gleichen Mobiliar ausgestattet. Als Brandbeschleuniger kamen Benzin und Diesel als Gemisch zum Einsatz. Bei den Versuchen zeigte sich unter anderem, dass der Brandbeschleuniger deutlich die Zeit bis zum Flashover verkürzt. Aus den ermittelten Kennwerten zur Wärmefreisetzung und den Rauchgastemperaturen können Rückschlüsse auf die energetischen Gefahren abgeleitet werden. Die quantitative Erfassung toxischer Rauchgaskomponenten erfolgte mit Hilfe der Fourier-Transformations- Infrarot-(FTIR)-Spektroskopie. Die qualitative und quantitative Rauchgaszusammensetzung wurde dabei in der Brandraummitte, an der Brandraumöffnung, unter der Brandraumdecke und im Schlot ermittelt. Aus der Massenverlustrate und der quantitativen Rauchgasanalyse können Aussagen zur Rauchgastoxizität getroffen werden und die stofflichen Gefahren beurteilt werden. Das Wissen über die Bildung von energetischen und stofflichen Brandprodukten ermöglicht somit eine risikogerechte Beurteilung der Brandgefahren bei Raumbränden, auch in Hinblick auf die unterschiedlichen Brandphasen. T2 - Vfdb 2013 - 61. Jahresfachtagung CY - Weimar, Germany DA - 27.05.2013 KW - Brand KW - Rauchgasanalytik PY - 2013 SP - 771 EP - 787 CY - Altenberge AN - OPUS4-28628 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mann, Guido A1 - Pentzien, Simone A1 - Krüger, Jörg T1 - Beam diameter dependence of surface damage threshold of fused silica fibers and preforms for nanosecond laser treatment at 1064 nm wavelength N2 - Optical fibers made of fused silica are a common method of transmitting high laser pulse energies. Failure of those fibers is a significant risk. The determination of laser-induced damage thresholds (LIDT) on fiber end facets according to ISO 21254 standard is needed. In the past, single pulse nanosecond laser experiments showed an improvement of LIDT with increasing fiber core diameter for 1064 nm wavelength and a constant beam diameter of 50 µm. This paper pays particular attention to the influence of the laser beam diameter on damage resistance. All-silica fiber types (LEONI) with different core diameters (100–600 µm) were investigated using beam diameters in a range from 30 µm to 100 µm. For comparison experiments on fused silica preform material (Heraeus F300) were performed. On one hand, surface LIDT of fused silica preform material decreases significantly with increasing beam size. A model considering a random distribution of point defects explains the experimental data qualitatively. On the other hand, LIDT of fiber end facets stays constant. White light microscopy results suggest that the point defect density on fiber end facets is lower compared to the preform surface due to an excellent surface polish quality. KW - Laser-induced damage threshold KW - Nanosecond laser KW - Optical fiber KW - Fused silica KW - Spot size KW - Defect model PY - 2013 DO - https://doi.org/10.1016/j.apsusc.2013.03.088 SN - 0169-4332 SN - 1873-5584 VL - 276 SP - 312 EP - 316 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-28310 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - CO Emission aus Holzkohle beim Grillen T2 - 10. BfR Symposium "Bewertungen von Vergiftungen" CY - Berlin, Germany DA - 2013-04-30 PY - 2013 AN - OPUS4-28399 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mohamed, Zeinab A1 - Krüger, Simone A1 - Hidde, Gundula A1 - Schimanski, A. A1 - Jäger, Christian A1 - Friedrich, Jörg Florian T1 - Deposition of thick polymer or inorganic layers with flame-retardant properties by combination of plasma and spray processes N2 - Mixtures of hexamethyldisiloxane (HMDSO) and oxygen have been used for deposition of SiO2-like layers by plasma polymerization under low-pressure conditions onto polyethylene and polystyrene used as basecoat. Water glass was cast onto these 0.5 µm plasma thick siloxane-like layers with a thickness of 5 to 40 µm. The adhesion of these bilayer systems and their flame resistance were tested. The effect of different plasma parameters such as monomer/gas ratio, pressure and power input into the discharge on the deposition rate and the composition of the formed layers was studied. Characterization and chemical composition of the formed films were performed using infrared, X-ray photoelectron and solid state nuclear magnetic resonance spectroscopy. Peel strengths of composites were measured and the locus of peel front propagation was detected. Thermal properties of composites were analyzed by thermo-gravimetric analysis. Finally, the fire-retardant properties of thick coated polymers were determined by exposure to flames and the behavior of coatings on the polymers during flaming was observed visually. KW - Plasma polymerization KW - Hexamethyldisiloxane plasma polymer KW - Polystyrene KW - Polyethylene KW - Flame retardancy PY - 2013 DO - https://doi.org/10.1016/j.surfcoat.2013.04.039 SN - 0257-8972 VL - 228 SP - 266 EP - 274 PB - Elsevier B.V. CY - Lausanne AN - OPUS4-28735 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Deubel, Jan A1 - Werrel, Martin A1 - Krüger, Simone A1 - Raspe, Tina T1 - Raumbrände - Teil 1: Versuchsaufbau und brandtechnologische Untersuchungen N2 - Dieser Bericht behandelt die Durchführung, Auswertung und Ergebnisse einer Versuchsserie zu Raumbränden. Diese wurde zur Untersuchung von Fragestellungen zum Einfluss von Brandbeschleuniger auf den Brandverlauf sowie zu den Möglichkeiten des Nachweises des Brandbeschleunigers in kriminaltechnischen Ermittlungen durchgeführt. Die Versuche haben im Rahmen des Forschungsprojekts Brandspurenanalytik der Bundesanstalt für Materialforschung und -prüfung im Jahr 2012 an der Brandprüfstelle Laue der Gesellschaft für Materialforschung und Prüfungsanstalt für das Bauwesen Leipzig mbH stattgefunden. Im Forschungsprojekt wurden verschiedene Materialien und ihr Brandverhalten in Kombination mit flüssigen Brandbeschleunigern in der Rauchdichtekammer (DIN EN ISO 5659-2), dem Cone Calorimeter (ISO 5660-1) und dem Single Burning Item Test (DIN EN 13823) untersucht. Die Untersuchungen hatten zwei Schwerpunkte. Einerseits wurde im Anschluss an die Versuche der Brandrückstand mit analytischen Methoden mit dem Ziel des Nachweises des Brandbeschleunigers untersucht. Andererseits dienen die gemessenen Größen wie Massenverlustrate, Wärmefreisetzungsrate und Temperaturen innerhalb der Proben als Vergleichsgrößen bei der Validierung numerischer Simulationen und der genutzten Materialmodelle. Ergänzend zu den kleinskaligen Versuchen wurden die selben Materialien in den in diesem Bericht vorgestellten Raumbränden verwendet, um das Brandverhalten im Originalmaßstab zu untersuchen. Der gesamte Bericht gliedert sich in drei Teile. Der hier vorliegende Teil 1 thematisiert den Aufbau, die Durchführung und die brandtechnologische Auswertung der Versuche und diskutiert Untersuchungsergebnisse zum Brandverlauf. In Teil 2 werden die analytischen Methoden zum Nachweis des Brandbeschleunigers in den Brandrückständen vorgestellt und ausgewertet und in Teil 3 werden Empfehlungen zur Probenahme von Proben zum Brandbeschleunigernachweis auf Basis der gewonnen Erkenntnisse im Forschungsprojekt gegeben sowie die Ergebnisse der in diesem Bericht vorgestellten Versuche vorgestellt. Die hier beschriebenen Versuche bildeten einen typischen Wohnzimmerbrand ab. In einem Brandraum mit einer Fläche von 20m² wurden verschiedene Einrichtungsgegenstände, wie Sofas, Regale, ein Esstisch, vier Stühle und ein Couchtisch, als Brandlast angeordnet. Insgesamt wurden fünf Versuche bei identischer Brandlast durchgeführt. Beim ersten Versuch erfolgte die Zündung mit einem Feuerzeug an einem der Sofas. Bei den vier weiteren Versuchen wurde mit einem Benzin-Diesel-Gemisch als Brandbeschleuniger an jew. unterschiedlichen Positionen im Brandraum gezündet. Während dem Versuch wurden die Temperaturen im Brandraum mit Mantelthermoelementen, Wärmeströme auf Oberflächen mit Plattenthermometern, die Konzentration verschiedener Gasspezies, der globale Massenverlust, der Fluidmassenstrom durch die Zuluftöffnung und die Wärmefreisetzungsrate gemessen. Im Anschluss an den Versuch wurden Brandschutt- und Rußwischproben genommen. Diese wurden mit dem Ziel des Nachweises der verwendeten Brandbeschleuniger analysiert. Die Zündung mit Brandbeschleuniger führte primär zu einer erhöhten Brandentwicklungsgeschwindigkeit. Der Flashover trat bei allen Versuchen, die mit Brandbeschleuniger gezündet wurden, wesentlich früher auf, als bei dem ersten Versuch, der mit einem Feuerzeug gezündet wurde. Die erreichten Maximalwerte der brandtechnologischen Kenngrößen, wie beispielsweise die Temperaturen im Brandraum oder die Wärmefreisetzungsrate, waren jedoch bei allen fünf Versuchen in der gleichen Größenordnung. Die gewonnen Daten zum Brandverlauf können als Vergleichswerte für numerische Simulationen verwendet werden. KW - Raumbrände KW - Rauchgase KW - Wärmefreisetzung KW - Rauchgastemperaturen KW - Analytik PY - 2013 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-294517 SN - 978-3-9815944-2-3 SN - 0938-5533 SP - 1 EP - 278 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-29451 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone T1 - Experimentelle und numerische Untersuchungen zur Brandgefährdung in Lagern von Recyclingstoffen T2 - 6. Sekundärrohstoff-Workshop CY - Nordhausen, Germany DA - 2013-10-17 PY - 2013 AN - OPUS4-29438 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schartel, Bernhard A1 - Krüger, Simone A1 - Wachtendorf, Volker A1 - Hennecke, Manfred T1 - Excitation energy transfer of a bichromophoric cross-shaped molecule investigated by polarized fluorescence spectroscopy N2 - The excitation energy transfer (EET) of a bichromophoric cross-shaped molecule was investigated by stationary polarized fluorescence spectroscopy in the solid state. For this purpose 2,2[prime],7,7[prime]-tetrakis(biphenyl-4-yl)-9,9[prime]-spirobifluorene was embedded in a polymeric bisphenol-A-polycarbonate (PC) matrix. The dependence of the fluorescence on concentration and wavelength was determined. The role of the intermolecular and intramolecular EET is dealt with separately and discussed by means of the degree of polarization. The intermolecular excitation energy transfer is described in terms of a Förster transfer mechanism. The intramolecular transfer is prevented for the zero-point vibrational levels by the molecular cross-shaped structure, but is found for a wide range of wavelength, presumably based on vibrationally excited states. PY - 2000 DO - https://doi.org/10.1063/1.481620 SN - 0021-9606 SN - 1089-7690 VL - 112 IS - 22 SP - 9822 EP - 9827 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-1038 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Simone A1 - Kunze, Ralf A1 - Brademann-Jock, Kerstin A1 - Raabe, Hans-Joachim ED - Eichhorn, K.-J. ED - Fischer, D. T1 - Thermoluminescence - A useful method to investigate the stability of PP-fleece textiles T2 - 14th European Symposium on Polymer Spectroscopy ; 14th ESOPS CY - Dresden, Germany DA - 2001-09-02 PY - 2001 SN - 3-527-30474-6 SN - 1022-1360 IS - 184 SP - 106 PB - Wiley-VCH CY - Weinheim AN - OPUS4-1159 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -