TY - JOUR A1 - Heidmann, B. A1 - Andree, Stefan A1 - Levcenko, S. A1 - Unold, T. A1 - Abou-Ras, D. A1 - Schäfer, N. A1 - Bonse, Jörn A1 - Krüger, Jörg A1 - Schmid, M. T1 - Fabrication of regularly arranged chalcopyrite micro solar cells via femtosecond laser-induced forward transfer for concentrator application N2 - A laser-based bottom-up technique for the fabrication of Cu(In,Ga)Se2 (CIGSe) micro solar cells is presented. We use femtosecond laser-induced forward transfer (LIFT) to transport a metallic precursor composed of copper, indium, and gallium onto a molybdenum back contact layer on a glass substrate. A CIGSe absorber forms by subsequent selenization. An array of micro absorbers with defined spacing is fabricated to solar cells and characterized under concentrated light illumination. The solar cell array exhibited a conversion efficiency of 1.4‰ at 1 sun as well as a significant efficiency enhancement of 68% rel. under 20-fold concentration. This work demonstrates the possibility of directly grown micrometer-sized solar cells based on chalcogenide absorber layers, enabling effective material usage. KW - Micro solar cells KW - Light concentration KW - LIFT KW - Chalcopyrite KW - Femtosecond laser PY - 2018 DO - https://doi.org/10.1021/acsaem.7b00028 SN - 2574-0962 VL - 1 IS - 1 SP - 27 EP - 31 PB - ACS CY - Washington, DC AN - OPUS4-43999 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gebauer, D. A1 - Beltrán Gutierrez, R. A1 - Marx, S. A1 - Maack, Stefan A1 - Küttenbaum, Stefan A1 - Pirskawetz, Stephan A1 - Breit, W. A1 - Mechtcherine, V. A1 - Grahl, K. A1 - Thiel, T. A1 - Schickert, M. A1 - Krüger, M. T1 - Interrelated Data Set from Nondestructive and Destructive Material Testing of Concrete Compressive Strength Specimens N2 - "This data set contains three different data types obtained from concrete specimens. For each specimen, the rebound numbers, ultrasonic data (ultrasonic velocity, time of flight), and destructive concrete strength are given. Two kind of specimen geometries were tested: cubes and drilled cores. The files are labeled according to the specimen geometry as "cube" or "core" and the type of measurement data as "compressive_strength", "rn_R" and "rn_Q" for rebound numbers as well as "us" for ultrasonic data. The ultrasonic data were generated by six independent laboratories, the rebound numbers by five independent laboratories and the destructive tests by one laboratory. The designation of each specimen establishes the relationship between the different data types." KW - Compressive Concrete Strength KW - Rebound Hammer KW - Ultrasonic Pulse Velocity PY - 2023 DO - https://doi.org/10.7910/DVN/AFCITK PB - Harvard College CY - Cambridge, MA, USA AN - OPUS4-57223 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gebauer, D. A1 - Gutierrez, B. A1 - Marx, S. A1 - Maack, Stefan A1 - Küttenbaum, Stefan A1 - Pirskawetz, Stephan A1 - Breit, W. A1 - Mechtcherine, V. A1 - Grahl, K. A1 - Thiel, T. A1 - Schickert, M. A1 - Krüger, M. T1 - Interrelated data set from nondestructive and destructive material testing of concrete compressive strength specimens N2 - This data set contains three different data types obtained from concrete specimens. For each specimen, the rebound numbers, ultrasonic data (ultrasonic velocity, time of flight), and destructive concrete strength are given. Two kind of specimen geometries were tested: cubes and drilled cores. The files are labeled according to the specimen geometry as "cube" or "core" and the type of measurement data as "compressive_strength", "rn_R" and "rn_Q" for rebound numbers as well as "us" for ultrasonic data. The ultrasonic data were generated by six independent laboratories, the rebound numbers by five independent laboratories and the destructive tests by one laboratory. The designation of each specimen establishes the relationship between the different data types. KW - Non-destructive testing KW - Rebound number KW - Ultrasonic pulse velocity KW - Compressive concrete strength KW - Interlaboratory comparison PY - 2023 DO - https://doi.org/10.7910/DVN/AFCITK PB - Harvard College CY - Cambridge, MA, USA AN - OPUS4-57499 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Procop, Mathias A1 - Klein, A. A1 - Rechenberg, I. A1 - Krüger, D. T1 - AES Depth profiling of semiconducting multilayer structures using an ion beam bevelling technique PY - 1997 SN - 0937-0633 VL - 358 SP - 358 EP - 360 PB - Springer CY - Berlin AN - OPUS4-7097 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mero, M. A1 - Clapp, B. A1 - Jasapara, J.C. A1 - Rudolph, W. A1 - Ristau, D. A1 - Starke, K. A1 - Krüger, Jörg A1 - Martin, Sven A1 - Kautek, Wolfgang T1 - On the damage behavior of dielectric films when illuminated with multiple femtosecond laser pulses N2 - The physical effects reducing the damage threshold of dielectric films when exposed to multiple femtosecond pulses are investigated. The measured temperature increase of a Ta2O5 film scales exponentially with the pulse fluence. A polarized luminescence signal is observed that depends quadratically on the pulse fluence and is attributed to twophoton excitation of self-trapped excitons that form after band-to-band excitation. The damage fluence decreases with increasing pulse number, but is independent of the repetition rate from 1 Hz to 1 kHz at a constant pulse number. The repetition rate dependence of the breakdown threshold is also measured for TiO2 , HfO2, Al2O3, and SiO2 films. A theoretical model is presented that explains these findings. KW - Laser-induced damage KW - Laser materials KW - Ultrafast phenomena KW - Coatings PY - 2005 DO - https://doi.org/10.1117/1.1905343 SN - 0892-354X VL - 44 IS - 5 SP - 051107-1-051107-7 PB - Dekker CY - New York, NY AN - OPUS4-7406 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tressl, R. A1 - Wondrak, G. T. A1 - Kersten, E. A1 - Krüger, Ralph-Peter A1 - Rewicki, D. ED - Shibamoto, T. ED - Terao, J. ED - Osawa, T. T1 - Identification of maillard type polymers with antioxidative activity T2 - 213th National Meeting of the American Chemical Society CY - San Francisco, CA, USA DA - 1997-04-13 PY - 1998 SN - 0-8412-3573-2 SN - 0097-6156 N1 - Serientitel: ACS Symposium Series – Series title: ACS Symposium Series IS - 702 SP - 209 EP - 220 PB - American Chemical Society CY - Washington, DC AN - OPUS4-2160 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tressl, R. A1 - Kersten, E. A1 - Wondrak, G. T. A1 - Rewicki, D. A1 - Krüger, Ralph-Peter ED - O'Brien, J. T1 - Fragmentation of Sugar Skeletons and Formation of Maillard Polymers T2 - 6th International Symposium on the Maillard Reaction CY - London, England, UK DA - 1997-07-27 PY - 1998 SN - 0-85404-733-6 SN - 0260-6291 N1 - Serientitel: Special publication / Royal Society of Chemistry – Series title: Special publication / Royal Society of Chemistry IS - 223 SP - 69 EP - 75 PB - Royal Society of Chemistry CY - Cambridge AN - OPUS4-2161 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maier, B. A1 - Trathnigg, B. A1 - Much, Helmut A1 - Krüger, Ralph-Peter A1 - Berek, D. T1 - Characterization of polyethers using different chromatographic techniques and MALDI-TOF-MS PY - 1995 CY - Innsbruck AN - OPUS4-2205 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goering, Harald A1 - Krüger, Ralph-Peter A1 - Joel, D. T1 - Erfassung und Charakterisierung von Hartsegmenten in Polyurethanen mittels MALDI-TOF-MS T2 - Gesellschaft Deutscher Chemiker, "Klassische Polymere im Aufwind, Polymerchemie aktuell" CY - Dresden, Deutschland DA - 1996-03-25 PY - 1996 CY - Dresden AN - OPUS4-2211 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Starke, K. A1 - Ristau, D. A1 - Martin, Sven A1 - Hertwig, Andreas A1 - Krüger, Jörg A1 - Allenspacher, P. A1 - Riede, W. A1 - Meister, S. A1 - Theiss, C. A1 - Sabbah, A. A1 - Rudolph, W. A1 - Raab, V. A1 - Grigonis, R. A1 - Rakickas, T. A1 - Sirutkaitis, V. ED - Exarhos, G. J. T1 - Results of a round-robin experiment in multiple-pulse LIDT measurement with ultrashort pulses T2 - 35th Annual Boulder Damage Symposium ; 35th Annual Symposium on Optical Materials for High-Power Lasers CY - Boulder, CO, USA DA - 2003-09-22 KW - Multiple-pulse damage KW - ISO 11254-2 KW - S on 1-LIDT KW - Round-robin experiment KW - CHOCLAB PY - 2004 SN - 0-8194-5163-0 DO - https://doi.org/10.1117/12.525135 SN - 0038-7355 N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE IS - 5273 SP - 388 EP - 395 PB - SPIE, the International Society for Optical Engineering CY - Bellingham, Wash. AN - OPUS4-4948 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grimm, B. A1 - Krüger, Ralph-Peter A1 - Schrader, S. A1 - Prescher, D. T1 - Molecular structure investigations on fluorine-containing polyazomethines by means of MALDI-TOF-MS technique T2 - Berliner Polymerentage 2000 CY - Berlin, Germany DA - 2000-10-09 PY - 2000 CY - Berlin AN - OPUS4-2253 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Prescher, D. A1 - Grimm, B. A1 - Krüger, Ralph-Peter A1 - Schrader, S. T1 - To the formation of F-containing polyazomethines - investigation of the reaction products by MALDI TOF mass spectrometry T2 - 16th International Symposium Fluorine Chemistry CY - Durham, England, UK DA - 2000-07-16 PY - 2000 AN - OPUS4-2246 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gruber, D. A1 - Husinsky, W. A1 - Grabner, G. A1 - Baumgartner, I. A1 - Scholman, J. A1 - Krüger, Jörg A1 - Kautek, Wolfgang ED - Waidelich, W. T1 - Nano- and Femtosecond-Laser Processing of Human Donor Corneal-Transplants and Lenticules for Corneal Surgery T2 - 12. Internationaler Kongress Laser 95 CY - Munich, Germany DA - 1995-06-01 PY - 1996 SN - 3-540-61316-1 SP - 397 EP - 400 PB - Springer CY - Berlin AN - OPUS4-11895 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Oberlies, F. A1 - Krüger, D. T1 - Verfahren zur Untersuchung von asbesthaltigen Erzeugnissen PY - 1942 SN - 0372-7076 IS - II. Folge/Heft 4 SP - 24 EP - 31 PB - Springer CY - Berlin AN - OPUS4-28416 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Wolfgang A1 - Kalbe, Ute A1 - Krüger, Oliver A1 - Hennecke, D. T1 - Elutionsverfahren für die Untersuchung von Böden und Abfällen - Aktueller Stand N2 - Elutionsverfahren sind in den letzten Jahren zunehmend in das öffentliche Interesse gerückt. Zum Einen steht dies im Zusammenhang mit der geplanten Einführung einer Mantelverordnung in Deutschland, im Rahmen derer die Bundes-Bodenschutz- und Altlastenverordnung (BBodSchV) novelliert, eine Ersatzbaustoffverordnung eingeführt und die Deponieverordnung erweitert und modifiziert werden sollen. Dabei sollen die anzuwendenden Elutionsverfahren möglichst angeglichen werden und den aktuellen Erkenntnisstand widerspiegeln. Zum Anderen sind auch internationale Aktivitäten beispielsweise in Verbindung mit der Charakterisierung von Abfällen (CEN TC 292) und Untersuchung der Umweltverträglichkeit von Bauprodukten (CEN TC 351) zu berücksichtigen. PY - 2013 SN - 978-3-89531-872-6 SP - 47 EP - 55 CY - Wiesbaden AN - OPUS4-30192 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Wolfgang A1 - Kalbe, Ute A1 - Krüger, Oliver A1 - Hennecke, D. T1 - Vergleichende Bewertung von Elutionsverfahren für die Beurteilung des Auslaugverhaltens organischer Stoffe aus Böden N2 - Es wurde eine vergleichende Bewertung der Ergebnisse von Schüttel- und Säulenverfahren als Übereinstimmungstest für die Untersuchung des Auslaugverhaltens von organischen Schadstoffen aus Böden vorgenommen. Dafür wurden die Ergebnisse von Ringversuchen zur Validierung der entsprechenden Elutionsverfahren genutzt. Der Methodenvergleich zeigte, dass keine signifikanten Unterschiede zwischen den Ergebnissen beider Elutionsverfahren beobachtet wurden. Es wurden beim Schüttelverfahren tendenziell etwas geringere Gesamtmittelwerte der Ringversuchsteilnehmer als beim Säulenverfahren erzielt. T2 - DBG-Jahrestagung 2013 - Kommission VI - Böden - Lebensgrundlage und Verantwortung CY - Rostock, Germany DA - 07.09.2013 KW - Elutionsverfahren KW - Methodenvergleich KW - Säulenverfahren KW - Schüttelverfahren KW - Kontaminierte Böden KW - Organische Schadstoffe PY - 2013 N1 - Serientitel: Berichte der DBG – Series title: Berichte der DBG SP - 1 EP - 3(?) PB - DBG (Deutsche Bodenkundliche Gesellschaft) CY - Göttingen AN - OPUS4-29405 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Berger, Wolfgang A1 - Kalbe, Ute A1 - Krüger, Oliver A1 - Hennecke, D. A1 - Kördel, W. T1 - Evaluierung von Elutionsmethoden - Durchführung von Robustheitsuntersuchungen zur Validierung von E DIN 19527 für ausgewählte Böden und Bodenmaterialien mit prioritären organischen Schadstoffen N2 - Ziel des Vorhabens ist es, die Robustheit des Schüttelverfahrens nach E DIN 19527 mit einem Wasser-/Feststoffverhältnis von 2 l/kg für unterschiedliche Bodenarten und Bodenmaterialien zu überprüfen. Gleichzeitig soll bei diesen Untersuchungen das Stoffspektrum auf weitere prioritäre organische Kontaminanten erweitert werden. Dies stellt die Voraussetzung für die Durchführung von Ringversuchen zur Validierung der Norm DIN 19527 dar. KW - Kontaminierter Boden KW - PAK KW - PCB KW - MKW KW - Phenole KW - Elutionsverfahren KW - Schütteltests KW - Robustheitsuntersuchungen KW - Standardisierung KW - Validierung KW - Laborvergleich PY - 2013 UR - https://www.umweltbundesamt.de/sites/default/files/medien/378/publikationen/texte_77_2013_robustheitsuntersuchung_terytze_0.pdf VL - 77 SP - 1 EP - 124 PB - Umweltbundesamt CY - Dessau-Roßlau AN - OPUS4-28990 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Berger, Wolfgang A1 - Kalbe, Ute A1 - Krüger, Oliver A1 - Hennecke, D. A1 - Hoffe, S. T1 - Validierung des Schüttelverfahrens DIN 19527 für organische Schadstoffe N2 - Die im Jahre 1999 in Kraft getretene Bundes-Bodenschutz- und Altlastenverordnung (BBodSchV) befindet sich gegenwärtig in der Phase der Novellierung. Darüber hinaus ist die Einführung einer Ersatzbaustoffverordnung zur Verwertung mineralischer Abfälle vorgesehen. Beide Verordnungen erfordern für eine Gefahrenbeurteilung Prüfwerte, die auf der Grundlage validierter Elutionsverfahren hergeleitet sind. Im DIN-Normenausschuss NA 119-01-02-05 UA „Elutionsverfahren“ wurden Anfang 2009 zwei Normen zur Elution von Feststoffen verabschiedet. DIN 19528 beinhaltet ein Säulenverfahren zur grundlegenden Charakterisierung und für die Übereinstimmungsuntersuchung sowohl für anorganische Stoffe als auch für organische Stoffe (nur polyzyklische aromatische Kohlenwasserstoffe - PAK) und DIN 19529 ein Schüttelverfahren für anorganische Stoffe mit einem Wasser- Feststoffverhältnis von 2 l/kg. Beide Normen wurden auf der Grundlage von Ringversuchen validiert. Die Diskussion zur Erarbeitung eines Schüttelverfahrens für organische Stoffe verlief zunächst äußerst konträr. Auf Initiative von Kördel wurde zur Erarbeitung von E DIN 19527 (Schüttelverfahren für organische Stoffe mit einem Wasser-/Feststoffverhältnis von 2 l/kg) ein Ringversuch organisiert, bei dem zwar unterschiedliche Bodenarten Berücksichtigung fanden, die organischen Schadstoffe aber auf PAK beschränkt blieben. In einem Forschungsvorhaben zur Bewertung der Robustheit von E DIN 19527 zeigte sich, dass eine einfache Übertragung der Ergebnisse mit PAK-belasteten Böden auf andere Schadstoffgruppen nicht ohne Weiteres möglich ist. Für beide o. g. Verordnungen war es somit erforderlich, das Schüttelverfahren auch für weitere prioritäre organische Schadstoffgruppen wie Mineralölkohlenwasserstoffe (MKW), polychlorierte Biphenyle (PCB) und Phenole in Böden und Bodenmaterialien zu validieren. In diesem Beitrag werden die Ergebnisse von Ringversuchen zur Validierung von DIN 19527 vorgestellt, bei denen zwei unterschiedliche mit prioritären organischen Schadstoffen kontaminierte Böden/Bodenmaterialien eingesetzt wurden. PY - 2013 DO - https://doi.org/10.37307/j.1864-8371.2013.01.04 SN - 0942-3818 SN - 1864-8371 IS - 1 SP - 5 EP - 8 PB - Erich Schmidt Verlag CY - Berlin AN - OPUS4-27786 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Berger, Wolfgang A1 - Kalbe, Ute A1 - Krüger, Oliver A1 - Hennecke, D. A1 - Hoffe, S. T1 - Validierungsringversuche für E DIN 19527 Elution von Feststoffen - Schüttelverfahren zur Untersuchung des Elutionsverhaltens von organischen Stoffen mit einem Wasser/ Feststoff-Verhältnis von 2 l/kg für Boden- und andere geeignete Materialien N2 - Für die vom Bundesumweltministerium vorgesehene Mantelverordnung sind validierte Unter-suchungsmethoden erforderlich. Dazu gehört auch die Herstellung von wässrigen Eluaten, z.B. zur Beurteilung der Mobilität von Schadstoffen und der Ableitung von Grenzwerten. Ziel des Vorhabens war es, auf der Grundlage geeigneter Testmaterialien (mit prioritären organischen Schadstoffen kontaminierte Böden und Bodenmaterialien) Ringversuche zur Validierung des Schüttelverfahrens nach E DIN 19527 und des Säulenverfahrens für die Übereinstimmungs-untersuchung nach DIN 19528 durchzuführen. Auf der Grundlage der Untersuchungsergebnisse sollten beide Normen bezüglich der Vorgehensweise präzisiert werden und es sollten die während des Ringversuchs ermittelten Verfahrenskenndatenn zur Validierung der Normen herangezogen werden. Darüber hinaus sollten Säulen- und Schüttelverfahren als Übereinstimmungstest vergleichend bewertet werden. Es wurden vier geeignete Ringversuchsmaterialien hergestellt und an insgesamt 18 Ringversuchsteilnehmer ausgegeben. Die Auswertung der Ringversuche erfolgte auf der Grundlage klassischer Statistik nach DIN ISO 5725 mit Hilfe der AuswertesoftwareProLab 2011 (quo data). Auf der Grundlage der Validierungsringversuche wurden die Verfahrenskenndaten für die Norm DIN 19527 ermittelt. Die statistische Auswertung der eingereichten Datensätze war aufgrund der großen Streubreite der Daten schwierig. Die vorgeschriebenen statistischen Methoden zur Datenauswertung adressieren die Behandlung nicht gleichverteilter Datensätze nur ungenügend. Das muss bei der Bewertung der Ergebnisse und deren Zuverlässigkeit berücksichtigt werden. Generell kann festgestellt werden, dass keine signifikanten Unterschiede zwischen den Ergebnissen der Schüttel- und Säulenelution beobachtet werden. Dabei werden beim Schüttelverfahren tendenziell etwas geringere Gesamtmittelwerte erzielt als beim Säulenverfahren, die berechneten Vergleichsvariationskoeffizienten sind für das Schüttelverfahren meist etwas niedriger. Dennoch erweisen sich beide Elutionsverfahren bei den eingesetzten Ringversuchsmaterialien als gut vergleichbar. N2 - Validated investigation methods are required for the drafted decree, called “Mantelverordnung”, comprising the amendment of the Federal Ordinance on Soil Protection and Contaminated Sites, the Federal Ordinance on Mineral Waste Utilization and Groundwater Ordinance published by the German Federal Ministry for the Environment, Nature Conservation and Nuclear Safety in January 2011. These methods include such for the creation of aqueous eluates, which contribute to the evaluation of the mobility of pollutants and the derivation of threshold values. Objectives of the R&D project were interlaboratory tests for the validation of the batch test (E DIN 19527) and the column test using the compliance test option according to DIN 19528 based on contaminated soil test materials with organic pollutants of high priority. Dependent on the test results both standards should be specified concerning the experimental details. Furthermore, the standards shall be validated using the determined performance characteristics. The comparability of column and batch test procedures as compliance tests shall be evaluated in addition. Four appropriate test materials were prepared from two different types of soils, each with the pollutant combinations PAH/PCB and Phenols/TPH/PAH, respectively. These materials were delivered along with test solutions to 18 participants of the interlaboratory comparision. The evaluation of the interlaboratory comparison was carried out on the basis of classical statistics according to DIN ISO 5725. The software ProLab 2011 (quodata) was used for the evaluation. The performance characteristic parameters for the standard DIN 19527 were determined on the basis of the interlaboratory tests. The main challenge was the statistical evaluation due to the fact that the common statistical procedures do not address the evaluation of nonuniformly distributed datasets. This must be considered for the assessment of the results and reliability of the conclusions. However, on a more general level it can be concluded that no significant differences between the batch and column percolation test procedure were observed. The total mean values determined by batch tests tend to be slightly below the values from column tests. The between labvariation coefficients representing the reproducibility of the methods follow the same trend. All in all both methods can be assessed to be equivalent using the materials tested. KW - Kontaminierter Boden KW - PAK KW - PCB KW - MKW KW - Phenole KW - Elutionsverfahren KW - Schütteltest KW - Säulenversuch KW - Validierungsringversuche PY - 2012 SP - 1 EP - 189 AN - OPUS4-53610 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Markötter, Henning A1 - Haußmann, J. A1 - Alink, R. A1 - Dittmann, K. A1 - Tötzke, C. A1 - Krüger, P. A1 - Klages, M. A1 - Arlt, Tobias A1 - Müller, Bernd R. A1 - Riesemeier, Heinrich A1 - Scholta, J. A1 - Gerteisen, D. A1 - Manke, I. A1 - Banhart, J. T1 - Investigation of fuel cell materials and liquid water transport by means of synchrotron imaging N2 - Synchrotron imaging allows addressing various important issues in fuel cell research, for example water distribution and transport. The water distribution in polymer electrolyte membrane fuel cells (PEMFCs) was observed quasi in-situ directly after operation by means of synchrotron tomography. The 3D data set was compared with the tomogram of a dry cell in order to separate the water distribution from cell materials. Engineered transport pathways realized by perforating holes through the gas diffusion layer (GDL) are a recent approach to optimize water transport and cell performance. For some parameter sets a cell performance increase and an improvement of stabilization have already been proven. We present high resolution investigations of the water distribution in perforated GDLs of operating PEMFCs by means of in-situ synchrotron radiography. The surrounding areas of the holes exhibited a distinct hydrophilic character. KW - Gas-diffusion layers KW - Resolution neutron-radiography KW - X-ray radiography KW - Visualization KW - PEMFC PY - 2013 DO - https://doi.org/10.1149/04529.0195ecst SN - 1938-6737 SN - 1938-5862 VL - 45 IS - 29 SP - 195 EP - 202 CY - Pennington, NJ, USA AN - OPUS4-30545 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tscheuschner, Georg A1 - Kaiser, Melanie N. A1 - Lisec, Jan A1 - Beslic, D. A1 - Muth, Thilo A1 - Krüger, M. A1 - Mages, H.-W. A1 - Dorner, B. G. A1 - Knospe, J. A1 - Schenk, J. A. A1 - Sellrie, F. A1 - Weller, Michael G. T1 - MALDI-TOF-MS-based identification of monoclonal murine anti-SARS-CoV-2 antibodies within one hour N2 - During the SARS-CoV-2 pandemic, many virus-binding monoclonal antibodies have been developed for clinical and diagnostic purposes. This underlines the importance of antibodies as universal bioanalytical reagents. However, little attention is given to the reproducibility crisis that scientific studies are still facing to date. In a recent study, not even half of all research antibodies mentioned in publications could be identified at all. This should spark more efforts in the search for practical solutions for the traceability of antibodies. For this purpose, we used thirty-five monoclonal antibodies against SARS-CoV-2 to demonstrate how sequence-independent antibody identification can be achieved by simple means applied onto the protein. First, we examined the intact and light chain masses of the antibodies relative to the reference material NIST-mAb 8671. Already half of the antibodies could be identified based solely on these two parameters. In addition, we developed two complementary peptide mass fingerprinting methods with MALDI-TOF-MS that can be performed in 45 minutes and had a combined sequence coverage of over 80%. One method is based on the partial acidic hydrolysis of the protein by 5 mM of sulfuric acid at 99 °C. Furthermore, we established a fast way for a tryptic digest without an alkylation step. We were able to show that the distinction of clones is possible simply by a brief visual comparison of the mass spectra. In this work, two clones originating from the same immunization gave the same fingerprints. Later, a hybridoma sequencing confirmed the sequence identity of these sister clones. In order to automate the spectral comparison for larger libraries of antibodies, we developed the online software ABID 2.0 (https://gets.shinyapps.io/ABID/). This open-source software determines the number of matching peptides in the fingerprint spectra. We propose that publications and other documents critically relying on monoclonal antibodies with unknown amino acid sequences should include at least one antibody fingerprint. By fingerprinting an antibody in question, its identity can be confirmed by comparison with a library spectrum at any time and context. KW - SARS-CoV-2 antibody KW - Reproducibility crisis KW - Peptide mass fingerprinting KW - Monoclonal antibody KW - Traceability KW - Antibody identification KW - Identity KW - Antibody light chain KW - MALDI-TOF-MS KW - Trypsin KW - Acidic cleavage KW - Antibody subclass KW - Database KW - Peak overlap KW - ABID KW - Sulfuric acid KW - Online software KW - Sequencing KW - Peptide coverage PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-545182 DO - https://doi.org/10.20944/preprints202203.0229.v1 SN - 2310-287X SP - 1 EP - 24 PB - MDPI CY - Basel AN - OPUS4-54518 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kotsifaki, D.G. A1 - Zekou, L. A1 - Pentzien, Simone A1 - Krüger, Jörg A1 - Serafetinides, A.A. ED - Saunders, D. ED - Strlic, M. ED - Korenberg, C. ED - Luxford, N. ED - Birkhölzer, K. T1 - Cleaning of artificially soiled papers by infrared and mid-infrared lasers N2 - One of the most important materials presenting and witnessing human culture is paper. The cleaning of paper is often necessary because contamination must be removed so that the fragile organic substrate can be preserved. The conventional cleaning methods are mechanical or involve the application of chemicals. These methods can damage drawings or print layers to some extent or make the original paper substrate brittle. More specifically, the use of a scalpel blade can cause damage to fibers. Chemical cleaning is difficult to perform locally, can dissolve foreign matter that then migrates into the paper substrate, or involves volatile organic compounds that can be harmful to the conservator. There is, therefore, a need for new conservation technologies aimed at the safe cleaning of paper. Lasers have proved to be an appropriate tool for cleaning as the energy dose and penetration depth at the specific point of contamination can be controlled. Additionally, if used properly, laser cleaning is not destructive to the paper. T2 - LACONA IX - Lasers in the conservation of artworks CY - London, UK DA - 07.09.2011 KW - Laser cleaning KW - Paper KW - Artificial soiling KW - Nanosecond laser KW - Microsecond laser PY - 2013 SN - 978-1-904982-87-6 SP - 219 EP - 221 PB - Archetype publications Ltd. AN - OPUS4-27956 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Ralph-Peter A1 - Schöch, M. A1 - Müller, G. A1 - Hahne, D.-B. T1 - Strukturuntersuchungen an Makromonomeren für partiell kristalline polymere Netzwerke T2 - Vortragstagung "Funktionspolymere für Systemlösungen" CY - Darmstadt, Germany DA - 2002-03-18 PY - 2002 AN - OPUS4-1806 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -