TY - JOUR A1 - Knabe, C. A1 - Stiller, M. A1 - Kampschulte, M. A1 - Wilbig, Janka A1 - Peleska, B. A1 - Günster, Jens A1 - Gildenhaar, R. A1 - Berger, G. A1 - Rack, A. A1 - Linow, U. A1 - Heiland, M. A1 - Rendenbach, C. A1 - Koerdt, S. A1 - Steffen, C. A1 - Houshmand, A. A1 - Xiang-Tischhauser, L. A1 - Adel-Khattab, D. T1 - A tissue engineered 3D printed calcium alkali phosphate bioceramic bone graft enables vascularization and regeneration of critical-size discontinuity bony defects in vivo N2 - Recently, efforts towards the development of patient-specific 3D printed scaffolds for bone tissue engineering from bioactive ceramics have continuously intensified. For reconstruction of segmental defects after subtotal mandibulectomy a suitable tissue engineered bioceramic bone graft needs to be endowed with homogenously distributed osteoblasts in order to mimic the advantageous features of vascularized autologous fibula grafts, which represent the standard of care, contain osteogenic cells and are transplanted with the respective blood vessel. Consequently, inducing vascularization early on is pivotal for bone tissue engineering. The current study explored an advanced bone tissue engineering approach combining an advanced 3D printing technique for bioactive resorbable ceramic scaffolds with a perfusion cell culture technique for pre-colonization with mesenchymal stem cells, and with an intrinsic angiogenesis technique for regenerating critical size, segmental discontinuity defects in vivo applying a rat model. To this end, the effect of differing Si-CAOP (silica containing calcium alkali orthophosphate) scaffold microarchitecture arising from 3D powder bed printing (RP) or the Schwarzwalder Somers (SSM) replica fabrication technique on vascularization and bone regeneration was analyzed in vivo. In 80 rats 6-mm segmental discontinuity defects were created in the left femur. KW - Additive Manufacturing KW - Bio active ceramic KW - In-vivo KW - Alcium alkali phosphate PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-584555 DO - https://doi.org/10.3389/fbioe.2023.1221314 SN - 2296-4185 VL - 11 SP - 1 EP - 20 PB - Frontiers SA CY - Lausanne AN - OPUS4-58455 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller-Mai, C.M. A1 - Berger, Georg A1 - Stiller, M. A1 - Gildenhaar, Renate A1 - Jörn, Daniela A1 - Ploska, Ute A1 - Houshmand, A. A1 - Bednarek, A. A1 - Koch, C. A1 - Knabe, C. T1 - Evaluation of degradable bone cements for percutaneous augmentation of bone defects KW - Bone defect KW - Bioactive bone cement KW - Calcium alkali orthophosphates KW - Histology KW - Histomorphometry KW - Knochendefekt KW - Bioaktiver Knochenzement KW - Calciumalkaliorthophosphat KW - Histologie KW - Histomorphometrie PY - 2010 DO - https://doi.org/10.1002/mawe.201000706 SN - 0933-5137 SN - 1521-4052 VL - 41 IS - 12 SP - 1040 EP - 1047 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-22891 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Knabe, C. A1 - Howlett, C. R. A1 - Markovic, B. A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Zreiqat, H. T1 - The Functional Expression of Osteoblasts Grown on Rapid Resorbable Calcium Phosphates T2 - 15th International Symposium on Ceramics in Medicine ; 15th Annual meeting of the International Society for Ceramics in Medicine ; 15th Bioceramics CY - Sydney, NSW, Australia DA - 2002-12-04 KW - Guided bone regeneration KW - Calcium alkali orthophosphates KW - Osteoblasts KW - Cell differentiation PY - 2003 SN - 1013-9826 VL - 240-242 SP - 679 EP - 682 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-2115 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gross, U. A1 - Müller-Mai, C. A1 - Knabe, C. A1 - Berger, Georg A1 - Ploska, Ute A1 - Gildenhaar, Renate ED - Vincenzini, P. T1 - Animal experiments with biomaterials for direct bone contact displaying higher or lower solubility in comparison to TCP and HA products T2 - 10th International Ceramics Congress ; 3rd Forum on New Materials ; 10th CIMTEC 2002 CY - Florence, Italy DA - 2002-07-14 PY - 2004 SP - 369 EP - 376 PB - Techna CY - Faenza AN - OPUS4-3500 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Knabe, C. A1 - Berger, Georg A1 - Gildenhaar, Renate A1 - Meyer, J. A1 - Howlett, C. A1 - Markovic, B. A1 - Zreiqat, H. T1 - Effect of rapidly resorbable calcium phosphates and a calcium phosphate bone cement on the expression of bone-related genes and proteins in vitro N2 - The use of biodegradable bone substitutes is advantageous for alveolar ridge augmentation because it avoids second-site surgery for autograft harvesting. This study examines the effect of novel, rapidly resorbable calcium phosphates and a calcium phosphate bone cement on the expression of bone-related genes and proteins by human bone-derived cells (HBDCs) and compares this behavior to that of tricalciumphosphate (TCP). Test materials were -TCP, two materials with a crystalline phase Ca2KNa(PO4)2 and with a small amorphous portion containing either magnesium potassium phosphate (material denominated GB14) or silica phosphate (material denominated GB9), and a calcium phosphate bone cement (material denominated Biocement D). HBDCs were grown on the substrata for 3, 7, 14, and 21 days, counted, and probed for various mRNAs and proteins (type I collagen, osteocalcin, osteopontin, osteonectin, alkaline phosphatase, and bone sialoprotein). All substrates supported continuous cellular growth for 21 days. In the presence of GB14 and Biocement D specimens cell proliferation was reduced and cell differentiation increased. At day 21, the greatest number of cells was found on GB9 expressing significantly higher levels of bone-related proteins than cells grown on all other surfaces. Because all novel materials facilitated the expression of the osteoblastic phenotype at least as much as TCP and the polystyrene control, these biomaterials can be regarded as excellent candidate bone substitute materials. GB9 induced the highest proliferation and cellular differentiation after 21 days of incubation, suggesting that this material may possess a higher potency for enhancing osteogenesis than TCP. © 2004 Wiley Periodicals, Inc. J Biomed Mater Res 69A: 145-154, 2004 KW - Calcium phosphate ceramics KW - Human bone-derived cells KW - Cell-biomaterial interactions KW - Calcium phosphate cements KW - In situ hybridization PY - 2004 DO - https://doi.org/10.1002/jbm.a.20131 SN - 1549-3296 SN - 1552-4965 VL - 69 IS - 1 SP - 145 EP - 154 PB - Wiley CY - Hoboken, NJ AN - OPUS4-3502 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Lehmann, Erhard A1 - Stiller, M. A1 - Koch, C. A1 - Ducheyne, P. A1 - Rack, A. A1 - Seligmann, H. A1 - Jonscher, S. A1 - Knabe, C. T1 - A comparative study of the biodegradability of calcium-alkali-orthophosphate ceramics in vitro and in vivo KW - Calcium-alkali-orthophosphate KW - Solubility KW - Biodegradability PY - 2007 SN - 1013-9826 VL - 330-332 SP - 63 EP - 66 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-14528 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Knabe, C. A1 - Howlett, C. A1 - Markovic, B. A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Zreiqat, H. T1 - The functional expression of human osteoblasts grown on resorbable calcium phosphates N2 - The use of biodegradable bone substitutes is advantageous for alveolar ridge augmentation, since it avoids second-site surgery for autograft harvesting. This study examines the effect of novel, rapidly resorbable calcium phosphates on the expression of bone-related genes and proteins by human bone derived cells (HBDC) and compares this behavior to that of tricalciumphosphate (TCP). Test materials were -TCP, a newly synthesized chemical Ca2KNa(PO4)2 (material denominated R17), two glassy crystalline materials with a crystalline phase Ca2KNa(PO4)2 and in addition a small amorphous portion containing either magnesium potassium phosphate (material denominated GB14) or silica phosphate (material denominated GB9). HBDC was grown on the substrates for 3, 5, 7, 14 and 21 days, counted and probed for various mRNAs and proteins (collagen type I, osteocalcin, osteopontin, osteonectin, alkaline phosphatase and bone sialoprotein). All substrates supported continuous cellular growth for 21 days. At day 21, R17, GB9, TCP and GB14. T2 - 15th International Symposium on Ceramics in Medicine CY - Sydney, NSW, Australia DA - 2002-12-04 PY - 2002 DO - https://doi.org/10.4028/www.scientific.net/KEM.240-242.679 SN - 1013-9826 VL - 240-242 SP - 679 EP - 682 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-1891 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knabe, C. A1 - Howlett, C. A1 - Markovic, B. A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Reif, D. A1 - Zreiqat, H. T1 - The functional expression of human bone derived cells grown on resorbable bioactive glass ceramics T2 - 28th Annual Meeting & Exposition of the Society for Biomaterials CY - Tampa, FL, USA DA - 2002-04-23 PY - 2002 SP - 706 PB - Society for Biomaterials AN - OPUS4-1892 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gross, U. A1 - Müller-Mai, C. A1 - Knabe, C. A1 - Berger, Georg A1 - Ploska, Ute A1 - Gildenhaar, Renate ED - Vincenzini, P. T1 - Animal experiments with biomaterials for direct bone contact which possess in comparison to TCP and HA products higher or lower solubility T2 - 10th International Ceramics Congress ; 3rd Forum on New Materials ; 10th CIMTEC 2002 CY - Florence, Italy DA - 2002-07-14 PY - 2003 PB - Techna CY - Faenza AN - OPUS4-1894 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Knabe, C. A1 - Howlett, C. A1 - Markovic, B. A1 - Klar, F. A1 - Zreiqat, H. T1 - The Effect of Different Dental Titanium and Calcium Phosphate Implant Surfaces on the Expression of Bone-Related Genes and Proteins in vitro T2 - 6th World Biomaterials Congress CY - Kamuela, Big Island, HI, USA DA - 2000-05-15 KW - Dental Implant Surfaces PY - 2000 VL - 1 SP - 238 PB - Society for Biomaterials CY - Minneapolis, Minn. AN - OPUS4-869 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Knabe, C. A1 - Howlett, C. A1 - Markovic, B. A1 - Reif, D. A1 - Zreiqat, H. T1 - The Functional Expression of Human Bone Derived Cells Grown on Rapidly Resorbable Calcium Phosphate Ceramics T2 - 6th World Biomaterials Congress CY - Kamuela, Big Island, HI, USA DA - 2000-05-15 KW - Calcium Phosphate Ceramics PY - 2000 SP - 970 PB - Society for Biomaterials CY - Minneapolis, Minn. AN - OPUS4-870 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knabe, C. A1 - Howlett, C.R. A1 - Markovic, B. A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Zreiqat, H. T1 - Beeinflussung der Gen- und Proteinexpression von Osteoblasten durch bioaktive resorbierbare Glaskeramiken T2 - Bericht der 2. gemeinsamen Jahrestagung der Deutschen Gesellschaft für Implantologie im Zahn-, Mund- und Kieferbereich, der Österreichischen Gesellschaft für orale Chirurgie und Implantologie sowie der Schweizerischen Gesellschaft für orale Implantologie CY - München, Deutschland DA - 2002-12-05 PY - 2002 AN - OPUS4-1898 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knabe, C. T1 - Effect of rapidly resorbable calcium-alkali-orthophosphate bone grafting materials on osteogenesis after sinus floor augmentation in sheep T2 - Soc. for Biomaterials 2009 Annual Meeting and Exposition CY - San Antonio, TX, USA DA - 2009-04-22 PY - 2009 AN - OPUS4-19681 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stiller, M. A1 - Rack, A. A1 - Zabler, S. A1 - Goebbels, Jürgen A1 - Dalügge, O. A1 - Jonscher, S. A1 - Knabe, C. T1 - Quantification of bone tissue regeneration employing Beta-tricalcium phosphate by three-dimensional non-invasive synchrotron micro-tomography - A comparative examination with histomorphometry KW - Sinus floor augmentation KW - Histomorphometry KW - Synchrotron micro-tomography KW - Multi-dimensional microscopy KW - Histovolumetry PY - 2009 DO - https://doi.org/10.1016/j.bone.2008.10.049 SN - 8756-3282 VL - 44 IS - 4 SP - 619 EP - 628 PB - Elsevier CY - New York, NY, USA AN - OPUS4-22888 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knabe, C. T1 - Effect of rapidly resorbable calcium-alkali-Orthophosphate bone substitute materials one bone formation and osteoblastic phenotype expression in vivo T2 - 54th Annual Meeting of the Orthopaedic Research Soc. CY - San Francisco, CA, USA DA - 2008-03-02 PY - 2008 AN - OPUS4-17636 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knabe, C. T1 - Effect of rapidly resorbable calcium-alkali-orthophosphate bone substitute materials on osteogenesis and osteoblastic phenotype expression in vivo T2 - Transactions 32nd Annual Meeting of the Society for biomaterials USA CY - Chicago, IL, USA DA - 2007-04-18 PY - 2007 AN - OPUS4-18096 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dombrowski, Felix A1 - Ploska, Ute A1 - Berger, Georg A1 - Gildenhaar, Renate A1 - Stiller, M. A1 - Knabe, C. ED - Kim, Sukyoung T1 - Rheological investigations on degradable and figuline calcium alkaline phosphate cements T2 - 22nd International symposium on ceramics in medicine (Bioceramics 22) CY - Daegu, Korea DA - 2009-10-26 KW - Rheology KW - Calcium alkaline phosphate cement KW - Gelatine KW - Composite PY - 2009 SP - 863 EP - 866 AN - OPUS4-20287 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knabe, C. T1 - Novel, rapidly resorbable bioceramic bone grafts produce a major osteogenic effect - the pre-clinical evidence T2 - CIMTEC 2010 - 12th Intern. Conf. on Modern Materials and Technologies CY - Montecatini Terme, Italy DA - 2010-06-06 PY - 2010 AN - OPUS4-22517 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rack, A. A1 - Stiller, M. A1 - Nelson, K. A1 - Knabe, C. A1 - Rack, T. A1 - Zabler, S. A1 - Dalügge, O. A1 - Riesemeier, Heinrich A1 - Cecilia, A. A1 - Goebbels, Jürgen T1 - Ex vivo and in vitro synchrotron-based micro-imaging of biocompatible materials applied in dental surgery N2 - Biocompatible materials such as porous bioactive calcium phosphate ceramics or titanium are regularly applied in dental surgery: ceramics are used to support the local bone regeneration in a given defect, afterwards titanium implants replace lost teeth. The current gold standard for bone reconstruction in implant dentistry is the use of autogenous bone grafts. But the concept of guided bone regeneration (GBR) has become a predictable and well documented surgical approach using biomaterials (bioactive calcium phosphate ceramics) which qualify as bone substitutes for this kind of application as well. We applied high resolution synchrotron microtomography and subsequent 3d image analysis in order to investigate bone formation and degradation of the bone substitute material in a three-dimensional manner, extending the knowledge beyond the limits of classical histology. Following the bone regeneration, titanium-based implants to replace lost teeth call for high mechanical precision, especially when two-piece concepts are used in order to guaranty leak tightness. Here, synchrotron-based radiography in comparison with classical laboratory radiography yields high spatial resolution in combination with high contrast even when exploiting micro-sized features in these kind of highly attenuating objects. Therefore, we could study micro-gap formation at interfaces in two-piece dental implants with the specimen under different mechanical load. We could prove the existence of micro-gaps for implants with conical connections as well as to study the micromechanical behavior of the mating zone of conical implants during loading. The micro-gap is a potential issue of failure, i. e. bacterial leakage which can induce an inflammatory process. T2 - SPIE Conference 7804 - Developments in X-ray tomography VII CY - San Diego, CA, USA DA - 2010-08-02 KW - Microtomography KW - Synchrotron radiation KW - Radiography KW - Dental implants KW - Bioceramics KW - Implant-abutment interface PY - 2010 DO - https://doi.org/10.1117/12.858435 SN - 0277-786X N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series VL - 7804 SP - 78040E-1 - 78040E-8 AN - OPUS4-22731 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Jörn, Daniela A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Stiller, M. A1 - Knabe, C. T1 - Behaviour of calcium alkali orthophosphate cements under simulated implantation conditions KW - Calcium alkali orthophosphates KW - Calcium phosphate cement KW - Compressive strength KW - Setting times PY - 2009 SN - 1013-9826 VL - 396-398 SP - 213 EP - 216 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-17881 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gemeinert, Marion A1 - Dörfel, Ilona A1 - Griepentrog, Michael A1 - Gross, U. A1 - Klaffke, Dieter A1 - Knabe, C. A1 - Kranz, I. A1 - Österle, Werner T1 - Biological response to micron- and nanometer-sized particles known as potential wear products from artificial hip joints: Part I: Selection and characterization of model particles KW - Hip joint endoprostheses KW - Wear products KW - Particle size distribution KW - Model particles KW - Dispersing behavior of particles PY - 2009 DO - https://doi.org/10.1002/jbm.a.31952 SN - 1549-3296 SN - 1552-4965 VL - 89A IS - 2 SP - 379 EP - 389 PB - Wiley CY - Hoboken, NJ AN - OPUS4-19345 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kranz, I. A1 - Gonzalez, J.B. A1 - Dörfel, Ilona A1 - Gemeinert, Marion A1 - Griepentrog, Michael A1 - Klaffke, Dieter A1 - Knabe, C. A1 - Österle, Werner A1 - Gross, U. T1 - Biological response to micron- and nanometer-sized particles known as potential wear products from artificial hip joints: Part II: Reaction of murine macrophages to corundum particles of different size distributions KW - Macrophages KW - Cytokines KW - Nanoparticles (NP) KW - Microparticles (MP) KW - Corundum PY - 2009 DO - https://doi.org/10.1002/jbm.a.32121 SN - 1549-3296 SN - 1552-4965 VL - 89A IS - 2 SP - 390 EP - 401 PB - Wiley CY - Hoboken, NJ AN - OPUS4-19346 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Knabe, C. A1 - Berger, Georg A1 - Gildenhaar, Renate A1 - Ducheyne, P. A1 - Stiller, M. T1 - Novel, rapidly resorbable bioceramic bone grafts produce a major osteogenic effect - the pre-clinical evidence KW - Calcium phosphates KW - Bone substitute materials KW - Bioactive ceramics KW - Biodegradability PY - 2010 DO - https://doi.org/10.4028/www.scientific.net/AST.76.214 SN - 1662-0356 VL - 76 SP - 214 EP - 223 PB - Techna CY - Faenza AN - OPUS4-22028 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Lehmann, Erhard A1 - Knabe, C. T1 - Development of Alkali Containing Calcium Phosphate Cements KW - Calcium phosphate cement KW - Calcium potassium sodium phosphate KW - Potassium containing apatite KW - Bone substitute materials PY - 2008 SN - 1013-9826 VL - 361-363 SP - 331 EP - 334 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-15902 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Knabe, C. A1 - Houshmand, A. A1 - Berger, Georg A1 - Ducheyne, P. A1 - Gildenhaar, Renate A1 - Kranz, I. A1 - Stiller, M. T1 - Effect of rapidly resorbable bone substitute materials on the temporal expression of the osteoblastic phenotype in vitro N2 - Ideally, bioactive ceramics for use in alveolar ridge augmentation should possess the ability to activate bone formation and, thus, cause the differentiation of osteoprogenitor cells into osteoblasts at their surfaces. Therefore, in order to evaluate the osteogenic potential of novel bone substitute materials, it is important to examine their effect on osteoblastic differentiation. This study examines the effect of rapidly resorbable calcium-alkali-orthophosphates on osteoblastic phenotype expression and compares this behavior to that of β-tricalcium phosphate (TCP) and bioactive glass 45S5. Test materials were three materials (denominated GB14, GB9, GB9/25) with a crystalline phase Ca2KNa(PO4)2 and with a small amorphous portion containing either magnesium potassium phosphate (GB14) or silica phosphate (GB9 and GB9/25, which also contains Ca2P2O7); and a material with a novel crystalline phase Ca10[K/Na](PO4)7 (material denominated 352i). SaOS-2 human bone cells were grown on the substrata for 3, 7, 14, and 21 days, counted, and probed for an array of osteogenic markers. GB9 had the greatest stimulatory effect on osteoblastic proliferation and differentiation, suggesting that this material possesses the highest potency to enhance osteogenesis. GB14 and 352i supported osteoblast differentiation to the same or a higher degree than TCP, whereas, similar to bioactive glass 45S5, GB9/25 displayed a greater stimulatory effect on osteoblastic phenotype expression, indicating that GB9/25 is also an excellent material for promoting osteogenesis. KW - Bone substitute materials KW - Calcium-alkali-orthophosphate ceramics KW - SaOS-2 cells KW - Osteoblast differentiation KW - Bioactive glass PY - 2008 DO - https://doi.org/10.1002/jbm.a.31383 SN - 1549-3296 SN - 1552-4965 VL - 84A IS - 4 SP - 856 EP - 868 PB - Wiley CY - Hoboken, NJ AN - OPUS4-16658 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dombrowski, Felix A1 - Marx, Heidi A1 - Ploska, Ute A1 - Nicolaides, Dagmar A1 - Stiller, M. A1 - Knabe, C. A1 - Berger, Georg T1 - Solubility and ingrowth behaviour of degradable and figuline calcium alkaline phosphate cements N2 - The thrust of the investigations presented here is to point out the degradation behaviour in vitro and the ingrowth behaviour in vivo of four different calcium alkaline phosphate cements. Two of the figuline and mouldable composites consist of the crystalline phase Ca2KNa(PO4)2 and two of the crystalline phase Ca10[K/Na](PO4)2 each containing 2wt% medium gel strength porcine gelatin. Furthermore A-TCP was added to both Ca10[K/Na](PO4)2 cements as a hardening supporting reactant. The testing material groups differ in small amorphous portions containing either silica phosphate (GB9), magnesium potassium phosphate (GB14) or diphosphates (401545 and 401545(70)). The respective composites show a monomodal particle size distribution (d50~7µm; span~4) and an average total porosity around 28vol%.For the solubility studies cylindrical samples (d=6mm; h=12mm) were stored in a 0.1mol TRIS buffer solution and incubated at 37°C for maximum 50 weeks. The storage solution was analysed and renewed every week. The results are plotted cumulative. For the in vivo studies critical size defects were dissected to mandibles in a sheep model in which a 1cm³ area of the bottom of the mandibles was surgically resected and replaced with the figuline cements whereas the mouldability allows the reconstruction of the original outer contour without draining off even when replacing upside down. KW - Calcium alkaline phosphate cement KW - Gelatin KW - Figuline KW - Solubility KW - Ingrowth behavior PY - 2012 DO - https://doi.org/10.4028/www.scientific.net/KEM.493-494.387 SN - 1013-9826 VL - 493-494 SP - 387 EP - 390 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-24924 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gildenhaar, Renate A1 - Knabe, C. A1 - Wirth, Cynthia A1 - Linow, Ulf A1 - Houshmand, A. A1 - Berger, Georg T1 - Calcium alkaline phosphate scaffolds for bone regeneration 3D-fabricated by additive manufacturing N2 - Calcium alkaline phosphate granulates can be used for substitution of several bone defects but for the reconstruction of large skeletal parts in the maxillofacial and orthopaedic fields fitted scaffolds are preferable. Within the additive manufacturing methods, the 3D printing process offers exciting opportunities to generate defined porous scaffolds. We used a R1 printer from ProMetal Company, USA, for producing scaffolds directly from a ceramic powder. For this direct free form fabrication technology the powder has to possess a lot of specific properties both for the generation of a stable green body and also for the subsequent sintering preparation. For this printing process we prepared different granules in a fluidized bed process containing Ca2KNa(PO4)2 as main crystalline phase. Granules were characterized by different methods and several sieve fractions were used for preparing disc like and cylindrical parts. The suitability of granules for this printing process was determined by porosity and strength of produced bodies. Next to granules' performance both of these properties can be directly influenced by 3D printing process parameters. With knowledge of suitable process parameters scaffolds with different porosity in a respective desired design can be created. In this study, cylindrical scaffolds with graded porosity were produced for bone regeneration of segmental defects in maxillofacial surgery and dental implantology by tissue engineering. KW - 3D printing KW - Calcium alkaline phosphates KW - Ceramic scaffolds KW - Oral surgery PY - 2012 DO - https://doi.org/10.4028/www.scientific.net/KEM.493-494.849 SN - 1013-9826 N1 - Geburtsname von Wirth, Cynthia: Gomes, C. M. - Birth name of Wirth, Cynthia: Gomes, C. M. VL - 493-494 SP - 849 EP - 854 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-24989 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knabe, C. A1 - Gildenhaar, Renate A1 - Berger, R. A1 - Ostapowicz, W. A1 - Fitzner, R. A1 - Radlanski, R. A1 - Gross, U. A1 - Siebert, G. T1 - In vitro examination of novel calcium phosphates using osteogenic cultures T2 - 5th World Biomaterials Congress CY - Toronto, Canada DA - 1996-05-29 KW - In-vitro Untersuchung KW - Kalzium-Phosphat KW - Zahnersatz KW - Knochen PY - 1996 VL - 1 SP - 890 CY - Toronto AN - OPUS4-672 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rack, A. A1 - Zabler, S. A1 - Riesemeier, Heinrich A1 - Weidemann, Gerd A1 - Müller, Bernd R. A1 - Helfen, L. A1 - Stiller, M. A1 - Knabe, C. A1 - Goebbels, Jürgen A1 - Banhart, J. T1 - Nondestructive 3D insights into foamy metals and bioregenerative ceramics KW - X-ray Computed Tomography KW - Metal foams KW - Bioregenerative ceramics PY - 2008 UR - http://www.helmholtz-berlin.de/media/media/oea/web/pr_webseite/druckschriften/infos/bessy/highlights2007.pdf#page=34 SN - 1611-6127 SP - 34 EP - 35 PB - Berliner Elektronenspeicherring-Gesellschaft für Synchrotronstrahlung CY - Berlin AN - OPUS4-17538 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lopez-Heredia, M.A. A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Linow, Ulf A1 - Wirth, Cynthia A1 - Günster, Jens A1 - Houshmand, A. A1 - Stiller, M. A1 - Knabe-Ducheyne, C. T1 - Effect of stressed and unstressed cell culture environments on the viability of MC3T3 cells with calcium phosphates T2 - ISACB-6 - International symposium on apatite and correlative biomaterials CY - Nantes, France DA - 2013-06-05 KW - Cell culture media KW - Fetal bovine serum KW - Stressed KW - Unstressed KW - Calcium alkaline orthophosphates PY - 2013 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-299387 DO - https://doi.org/10.4172/2090-5025.S1-002 SN - 2090-5017 SN - 2090-5025 N1 - Geburtsname von Wirth, Cynthia: Gomes, C. M. - Birth name of Wirth, Cynthia: Gomes, C. M. SP - 1 EP - 3(?) PB - Ashdin AN - OPUS4-29938 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Adel-Khattab, D. A1 - Giacomini, F. A1 - Gildenhaar, R. A1 - Berger, G. A1 - Gomes, Cynthia A1 - Linow, Ulf A1 - Hardt, M. A1 - Peleska, B. A1 - Günster, Jens A1 - Stiller, M. A1 - Houshmand, A. A1 - Ghaffar, K. A1 - Gamal, A. A1 - El-Mofty, M. A1 - Knabe, C. T1 - Development of a synthetic tissue engineered three- dimensional printed bioceramic-based bone graft with homogenously distributed osteoblasts and mineralizing bone matrix in vitro N2 - Over the last decade there have been increasing efforts to develop three-dimensional (3D) scaffolds for bone tissue Engineering from bioactive ceramics with 3D printing emerging as a promising technology. The overall objective of the present study was to generate a tissue engineered synthetic bone graft with homogenously distributed osteoblasts and mineralizing bone Matrix in vitro, thereby mimicking the advantageous properties of autogenous bone grafts and facilitating usage for reconstructing segmental discontinuity defects in vivo . To this end, 3D scaffolds were developed from a silica-containing calcium alkali orthophosphate, using, fi rst, a replica technique – the Schwartzwalder – Somers method – and, second, 3D printing, (i.e. rapid prototyping). The mechanical and physical scaffold properties and their potential to facilitate homogenous colonization by osteogenic cells and extracellular bone matrix formation throughout the porous scaffold architecture were examined. Osteoblastic cells were dynamically cultured for 7 days on both scaffold types with two different concentrations of 1.5 and 3 × 10⁹ cells/l. The amount of cells and bone matrix formed and osteogenic marker expression were evaluated using hard tissue histology, immunohistochemical and histomorphometric analysis. 3D-printed scaffolds (RPS) exhibited more micropores, greater compressive strength and silica release. RPS seeded with 3 × 10⁹ cells/l displayed greatest cell and extracellular Matrix formation, mineralization and osteocalcin expression. In conclusion, RPS displayed superior mechanical and biological properties and facilitated generating a tissue engineered synthetic bone graft in vitro, which mimics the advantageous properties of autogenous bone grafts, by containing homogenously distributed terminally differentiated osteoblasts and mineralizing bone matrix and therefore is suitable for subsequent in vivo implantation for regenerating segmental discontinuity bone defects. KW - Bone tissue engineering KW - Calcium alkali orthophosphate KW - Rapid prototyping KW - Scaffold KW - Mandible PY - 2017 DO - https://doi.org/10.1002/term.2362 SN - 1932-6254 SN - 1932-7005 VL - 12 IS - 1 SP - 44 EP - 58 PB - Wiley Online Library AN - OPUS4-40745 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zocca, Andrea A1 - Elsayed, H. A1 - Bernardo, E. A1 - Wirth, Cynthia A1 - Lopez-Heredia, M.A. A1 - Knabe, C. A1 - Colombo, P. A1 - Günster, Jens T1 - 3D-printed silicate porous bioceramics using a non-sacrificial preceramic polymer binder N2 - Silicate bioceramics possess an excellent bioactivity; however, shaping them into complex geometries is still challenging. Therefore, this paper aims to present a new strategy for the shaping of a bioglass-ceramic with controlled geometry and properties starting from a glass powder combined with a preceramic polymer, i.e. a silicon resin, and reactive fillers. The powder-based three-dimensional (3D)-printing of wollastonite (CaSiO3)-based silicate bioceramic parts was demonstrated in this work. The resin plays a dual role, as it not only acts as a non-sacrificial binder for the filler powders in the printing process but it also reacts with the fillers to generate the desired bioceramic phases. The mechanical and physical properties, i.e. ball-on-three-balls test, density, porosity and morphology, were evaluated in 3D-printed discs. These samples possessed a total porosity around 64 vol% and a biaxial flexural strength around 6 MPa. The raw materials used in this work also enabled the 3D-printing of scaffolds possessing a designed multi-scale porosity, suitable bioceramic phase assemblage and a compressive strength of 1 MPa (for cylindrical scaffolds with total porosity ~80 vol%). Solubility in TRIS/HCl and in vitro assays, i.e. viability, cytotoxicity and apoptosis assays, were also performed. In vitro tests indicated good cell viability and no cytotoxicity effect on the cells. KW - KNN KW - Glass microspheres PY - 2015 DO - https://doi.org/10.1088/1758-5090/7/2/025008 SN - 1758-5082 VL - 7 IS - 2 SP - 025008 PB - IOP Publ. CY - Philadelphia AN - OPUS4-34957 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Knabe, Ch. A1 - Berger, Georg A1 - Gildenhaar, Renate A1 - Howlett, C.R. A1 - Markovic, B. A1 - Zreiqat, H. T1 - The functional expression of human bone-derived cells grown on rapidly resorbable calcium phosphate ceramics N2 - The use of biodegradable bone substitutes is advantageous for alveolar ridge augmentation, since it avoids second-site surgery for autograft harvesting. This study examines the effect of novel, rapidly resorbable calcium phosphates on the expression of bone-related genes and proteins by human bone-derived cells (HBDC) and compares this behavior to that of tricalciumphosphate (TCP). Test materials were a-TCP, and four materials which were created from ß-Rhenanite and its derivatives: R1-ß-Rhenanite (CaNaPO4); R1/M2 composed of CaNaPO4 and MgNaPO4; R1+SiO2 composed of CaNaPO4 and 9% SiO2 (wt%); and R17-Ca2KNa(PO4)2. HBDC were grown on the substrata for 3, 5, 7, 14 and 21 days, counted and probed for various mRNAs and proteins (Type I collagen, osteocalcin, osteopontin, osteonectin, alkaline phosphatase and bone sialoprotein). All substrata supported continuous cellular growth for 21 days. At day 21, surfaces of R1+SiO2 and R17 had the highest number of HBDC. At 14 and 21 days, cells on R1 and on R1+SiO2 displayed significantly enhanced expression of all osteogenic proteins. Since all novel calcium phosphates supported cellular proliferation together with expression of bone-related proteins at least as much as TCP, these ceramics can be regarded as potential bone substitutes. R1 and R1+SiO2 had the most effect on osteoblastic differentiation, thus suggesting that these materials may possess a higher potency to enhance osteogenesis than TCP. KW - Calcium phosphate ceramics KW - Human bone-derived cells KW - Cell-biomaterial interactions KW - Bone substitutes KW - In situ hybridization PY - 2004 DO - https://doi.org/10.1016/S0142-9612(03)00525-8 SN - 0142-9612 VL - 25 IS - 2 SP - 335 EP - 344 PB - Elsevier CY - Oxford AN - OPUS4-2957 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -