TY - CONF A1 - Klingelhöffer, Hellmuth T1 - Sichere und zuverlässige Anwendung von Werkstoffen - Optische Verfahren zur Untersuchung von Nickel-Basis-Legierungen T2 - Materials Week 2002, Materialica CY - Munich, Germany DA - 2002-09-30 PY - 2002 AN - OPUS4-6129 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Chen, W. A1 - Darowski, N. A1 - Zizak, I. A1 - Schumacher, G. A1 - Klingelhöffer, Hellmuth A1 - Wanderka, N. A1 - Neumann, W. ED - Chandra, T. ED - Torralba, Jose M. ED - Sakai, T. T1 - Measurement of Gamma/Gamma' Lattice Mismatch in Creep Deformed SIngle Crystal Superalloy SC16 Using Synchrotron X-Radiation T2 - International Conference on Processing & Manufacturing of Advanced Materials CY - Leganés, Spain DA - 2003-07-07 KW - Superalloy KW - Lattice mismatch KW - High temperature KW - Creep deformed PY - 2003 SN - 0-87849-919-9 SN - 0255-5476 N1 - Serientitel: Materials science forum – Series title: Materials science forum IS - 426-432/5 SP - 4555 EP - 4560 PB - Trans Tech Publ. CY - Uetikon-Zürich AN - OPUS4-2790 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Burlet, H. A1 - McColvin, G. A1 - Henderson, M. B. A1 - Garcia, J. C. A1 - Peteves, S. A1 - Klingelhöffer, Hellmuth A1 - Maldini, M. A1 - Klotz, U. E. A1 - Luthi, T. A1 - Wilcock, I. M. ED - Strang, A. T1 - Microstructural and Mechanical Performance Assessment of Diffusion Bonded Bimetallic Model Discs T2 - 6th International Charles Parsons Turbine Conference CY - Dublin, Ireland DA - 2003-09-16 PY - 2003 SN - 1-904350-20-8 SN - 1366-5510 N1 - Serientitel: Book / The Institute of Materials, Minerals and Mining – Series title: Book / The Institute of Materials, Minerals and Mining IS - 800 SP - 735 EP - 748 PB - Maney CY - London AN - OPUS4-2823 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Darowski, N. A1 - Zizak, I. A1 - Schumacher, G. A1 - Wanderka, N. A1 - Klingelhöffer, Hellmuth A1 - Chen, W. A1 - Neumann, W. T1 - Lattice mismatch in creep-deformed single crystal superalloy SC16 PY - 2003 UR - http://www.helmholtz-berlin.de/media/media/oea/web/pr_webseite/druckschriften/berichte/bessy/annualreport2002.pdf#page=283 SN - 0179-4159 SP - 283 EP - 285 PB - Berliner Elektronenspeicherring-Gesellschaft für Synchrotronstrahlung CY - Berlin AN - OPUS4-2491 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Darowski, N. A1 - Zizak, I. A1 - Schumacher, G. A1 - Klingelhöffer, Hellmuth A1 - Chen, W. A1 - Neumann, W. T1 - Temperature dependence of x-ray intensity profile FWHM of the gamma' phase in the creep-deformed single crystal superalloy SC16 N2 - High-resolution diffraction using synchrotron x-ray radiation was applied to study γ´ precipitates with an L12 superlattice crystal structure in the single crystal superalloy SC16 after creep deformation at 1223 K with a creep strain of ±0.5% for tensile and compressive loads, respectively. The measurements of full width at half maximum (FWHM) of 001 and 100 γ´ superlattice reflections were performed at various temperatures from ambient temperature to 1173 K in vacuum. The experimental results revealed that the FWHM of both reflections decrease with increasing temperature. It is well-known that changes in particle size and lattice distortion in materials could lead to a variation of FWHM. The observed behaviour is discussed in the light of both the above-mentioned aspects. The decrease in the peak width is mainly attributed to the temperature dependence of the internal strain state. KW - Creep deformation KW - Synchrotron x-ray radiation PY - 2005 DO - https://doi.org/10.1088/0022-3727/38/10A/038 SN - 0022-3727 SN - 1361-6463 VL - 38 IS - 10A SP - A200 EP - A203 PB - IOP Publ. CY - Bristol AN - OPUS4-11967 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Chen, W. A1 - Darowski, N. A1 - Zizak, I. A1 - Schumacher, G. A1 - Klingelhöffer, Hellmuth A1 - Neumann, W. T1 - Lattice distortion in precipitates of single crystal superalloy SC16 under creep deformation N2 - Specimens of single crystal superalloy SC16 were creep deformed at 1223 K along [0 0 1] up to ±0.5% creep strain using stresses of -150 MPa and +150 MPa, respectively. Line widths and peak positions of superlattice reflections were measured by means of X-ray diffraction parallel and perpendicular to the load axis in the temperature range between 293 K and 1173 K. The line widths were found to decrease with the increase of temperature for both directions on the two specimens after tensile and compressive creep deformation. After both kinds of creep deformation the crystal lattice showed tetragonal distortion which decreased with increasing temperature. The tetragonality after tensile creep deformation was larger than unity while it was smaller than unity after compressive creep deformation. The peak positions and widths restored after cooling back to room temperature. The experimental results can qualitatively be explained by the creation of dislocations during deformation and their anisotropic arrangement at the γ/γ' interfaces. KW - Superalloys KW - Creep deformation KW - Lattice distortion PY - 2006 DO - https://doi.org/10.1016/j.nimb.2005.12.032 SN - 0168-583X SN - 1872-9584 VL - 246 IS - 1 SP - 201 EP - 205 PB - Elsevier CY - Amsterdam AN - OPUS4-12498 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Hähner, P. A1 - Affeldt, E. E. A1 - Beck, T. A1 - Klingelhöffer, Hellmuth A1 - Loveday, M. A1 - Rinaldi, C. T1 - Validated code of practice for strain-controlled thermo-mechanical fatigue testing KW - TMF KW - Thermo-Mechanical strain-controlled fatigue testing PY - 2006 SN - 92-79-02216-4 SP - 1 EP - 37 PB - Office for Official Publications of the European Communities CY - Luxembourg AN - OPUS4-12756 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Epishin, Alexander A1 - Link, T. A1 - Brückner, Udo A1 - Klingelhöffer, Hellmuth A1 - Portella, Pedro Dolabella T1 - The effect of high temperature creep damage on low cycle fatigue of CMSX-4 T2 - 8th Liège Conference "Materials for Advanced Power Engineering 2006" CY - Liege, Belgium DA - 2006-01-01 KW - Superalloys KW - CMSX-4 KW - Single crystal KW - Creep KW - Fatigue PY - 2006 SN - 3-89336-436-6 N1 - Serientitel: Schriften des Forschungszentrums Jülich - Reihe Energietechnik / Energy Technology – Series title: Schriften des Forschungszentrums Jülich - Reihe Energietechnik / Energy Technology IS - 53 SP - 317 EP - 325 PB - Forschungszentrum Jülich CY - Jülich AN - OPUS4-13701 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schumacher, G. A1 - Darowski, N. A1 - Zizak, I. A1 - Klingelhöffer, Hellmuth A1 - Chen, W. A1 - Neumann, W. ED - Chandra, T. T1 - Time dependence of y/y' Lattice Mismatch in Creep-deformed Single Crystal Superalloy SC16 at 1173 K T2 - 5th International Conference on Processing & Manufacturing of Advanced Materials CY - Vancouver, Canada DA - 2006-07-04 KW - Superalloys KW - Lattice distortion KW - SC16 KW - Creep-deformation KW - X-ray diffraction PY - 2007 SN - 0-87849-428-6 SN - 0255-5476 N1 - Serientitel: Materials science forum – Series title: Materials science forum VL - 539-543/3 IS - 539/543 SP - 3059 EP - 3063 PB - Trans Tech Publ. CY - Stafa-Zürich AN - OPUS4-14032 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schumacher, G. A1 - Darowski, N. A1 - Zizak, I. A1 - Klingelhöffer, Hellmuth A1 - Chen, W. A1 - Neumann, W. ED - Chandra, T. T1 - Temperature Dependence of Lattice Distortion in Strongly Creep-deformed Single Crystal Superalloy SC16 T2 - 5th International Conference on Processing & Manufacturing of Advanced Materials CY - Vancouver, Canada DA - 2006-07-04 KW - Superalloys KW - SC16 KW - Lattice distortion KW - Creep-deformation KW - X-ray-diffraction PY - 2007 SN - 0-87849-428-6 SN - 0255-5476 N1 - Serientitel: Materials science forum – Series title: Materials science forum VL - 539-543/3 IS - 539/543 SP - 3048 EP - 3052 PB - Trans Tech Publ. CY - Stafa-Zürich AN - OPUS4-14033 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schumacher, Gerhard A1 - Klingelhöffer, Hellmuth A1 - Rehfeldt, T. T1 - Changes in lattice structure and microhardness during thermal treatment of a NiCoCrAIY alloy N2 - The stability of microstructure and the microhardness of a NiCoCrAlY alloy was studied after thermal treatment at high temperatures and subsequent quenching into ice water. The alloy revealed mainly two ordered phases, a gamma' phase with L12 lattice structure and a beta phase with B2 structure. The gamma' phase is shown to become unstable in the temperature range between 1073 K and 1373 K where it undergoes an order-disorder phase transformation. The low transformation temperature compared to pure Ni3Al is ascribed to deviations from the Ni3Al stoichiometry and to the additional alloying elements Co and Cr. The gamma'-gamma order-disorder transformation is shown to be attended by a decrease in microhardness of about 30 %. T2 - Symposium M: Thermal Barrier Coatings; MRS (Materials Research Society) fall meeting CY - Boston, MA, USA DA - 2000-01-01 PY - 2000 SN - 0272-9172 N1 - Serientitel: Materials Research Society symposium proceedings – Series title: Materials Research Society symposium proceedings IS - 645 PB - Materials Research Society CY - Warrendale, Pa. AN - OPUS4-1052 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Frenz, Holger A1 - Kinder, Joachim A1 - Klingelhöffer, Hellmuth A1 - Portella, Pedro Dolabella ED - Petit, J. T1 - Fracture of single crystal superalloys under cyclic loading at high temperatures T2 - 11th Biennial European Conference on Fracture (ECF) CY - Poitiers-Futuroscope, France DA - 1996-09-03 KW - Einkristall KW - Superlegierung KW - Hochtemperaturverhalten KW - Turbine PY - 1996 SN - 0-947817-92-1 VL - 2 SP - 1207 EP - 1213 PB - EMAS CY - Warley, West Midlands AN - OPUS4-699 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Klingelhöffer, Hellmuth A1 - Ledworuski, Siegmar A1 - Brookes, Stephan-Peter A1 - May, Thomas T1 - Computer controlled tensile testing according to EN 10002-1 Results of a comparison test programm to validate a proposal for an amendment of the standard N2 - Tensile testing according to EN 10002-1 is one of the basic mechanical tests to characterise the mechanical properties of metallic materials. This testing procedure has been regularly under development for many decades in order to modify and amend it and to bring it up to an up to date standard. Today tensile testing for quality control in metals manufacturing industry is routinely performed automatically with computer controlled testing machines. Due to economical needs of industry proposals were made by a European Standard Committee to amend the standard EN 10002-1. A European research project with the acronym TENSTAND was started to validate the proposed modifications of the tensile testing standard. The work package 4 of the project was to validate the machine control characteristics. A comparison test program was started with ten partners, 4 test piece geometries and 3 test parameters for 6 materials, partly with upper and lower yield strength and partly with 0.2 % proof strength to compare experimental results according to the proposal to modify the standard EN 10002-1. Initially testing in the strain control mode was introduced as well as switching of the control mode to crosshead control 1 and switching of the testing speed at appropriate points during the test. The comparison test was evaluated statistically and scientifically. The following conclusions were derived from the comparison test and summarised as recommendations to the standard committees. The scatter of the material properties were not significantly reduced by introducing the amended testing procedure. Few of the reasons for the continuously observed scattercan be identified as follows: The material properties are observed to be widely dependent on the testing speed. As a consequence the range for the allowed testing speed must be reduced. The closed loop control was not optimised sufficiently in some tests, the use of complicated testing machine software led to misinterpretation of software commands, individual testing equipment and implementation of the tensile testing procedure led also to scatter of the material properties which lay in a range of few percent. This is blurred by the inhomogeneity of the material. T3 - BAM Forschungsberichtreihe - 268 PY - 2005 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1835 SN - 978-3-86509-318-3 SN - 0938-5533 VL - 268 SP - 1 EP - 44 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-183 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Ziebs, Josef A1 - Klingelhöffer, Hellmuth A1 - Meersmann, Jürgen A1 - Frenz, Holger T1 - Gesetzmäßigkeiten für die werkstoffmechanische Beschreibung der einkristallinen Nickelbasislegierung SC 16 unter ein- und mehrachsiger Beanspruchung. N2 - Ein umfassender Überblick zum aktuellen Kenntnisstand von Nickelbasis-Legierungen am Beispiel von IN 738 LC und SC 16 unter ein- und mehrachsiger Hochtemperaturbeanspruchung. T3 - BAM Forschungsberichtreihe - 222 PY - 1997 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-2281 SN - 978-3-89701-037-2 SN - 0938-5533 VL - 222 SP - 1 EP - 48 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-228 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Frenz, Holger A1 - Kinder, Joachim A1 - Klingelhöffer, Hellmuth A1 - Portella, Pedro Dolabella T1 - Microstructural evolution and fracture mechanisms of single crystal superalloys under cyclic loading at high temperatures T2 - 17. Tagung des DVM-Arbeitskreises Rastermikroskopie in der Materialprüfung CY - Halle (Saale), Deutschland DA - 1996-03-27 KW - Einkristall KW - Superlegierung KW - Hochtemperatur PY - 1996 N1 - Serientitel: Tagung des DVM-Arbeitskreises Rastermikroskopie in der Materialprüfung – Series title: Tagung des DVM-Arbeitskreises Rastermikroskopie in der Materialprüfung IS - 17 SP - 275 EP - 280 PB - DVM, Geschäftsstelle CY - Berlin AN - OPUS4-665 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brookes, Stephen-Peter A1 - Kühn, Hans-Joachim A1 - Skrotzki, Birgit A1 - Klingelhöffer, Hellmuth A1 - Sievert, Rainer ED - Pohl, M. T1 - Axial-torsionale thermo-mechanische Ermüdung einer near-Gamma TiAl-Legierung T2 - Tagung "Werkstoffprüfung 2007" CY - Neu-Ulm, Deutschland DA - 2007-11-29 KW - Titanaluminide KW - Thermomechanische Ermüdung (TMF) KW - Mehrachsige Belastung KW - Axial-torsional Belastung KW - von Mises Vergleichsspannung KW - Spröd-Duktil-Übergangstemperatur PY - 2007 SN - 978-3-514-00753-6 SP - 249 EP - 254 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-16318 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klingelhöffer, Hellmuth T1 - Development of testing facilities to investigate the interaction between mechanical behaviour and high temperature corrosion in oxyfuel environments T2 - 4th International Conference on Clean Coal Technologies CY - Dresden, Germany DA - 2009-05-18 PY - 2009 AN - OPUS4-19440 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brookes, Stephen-Peter A1 - Kühn, Hans-Joachim A1 - Skrotzki, Birgit A1 - Klingelhöffer, Hellmuth A1 - Sievert, Rainer A1 - Pfetzing, J. A1 - Peter, D. A1 - Eggeler, G. ED - Kim, Young-Won ED - David Morris, ED - Rui Yang, ED - Christoph Leyens, T1 - Axial-torsional thermo-mechanical fatigue of Ti-45 Al-5Nb-0.2B-0.2C T2 - TMS 2008 Annual Meeting & Exhibition, "Structural Aluminides for Elevated Temperatures - Gamma Titanium and Other Metallic Aluminides" CY - New Orleans, Louisiana, USA DA - 2008-03-09 KW - Titanium Aluminide KW - Thermo-mechanical Fatigue KW - Axial-torsional Loading PY - 2008 SN - 978-0-87339-7209 SP - 103 EP - 109 PB - TMS CY - Warrendale, Pa AN - OPUS4-17904 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klingelhöffer, Hellmuth T1 - Hochtemperatur-Ermüdungsverhalten von warmfestem Gusseisen T2 - Tagung Werkstoffprüfung 2008 CY - Berlin, Germany DA - 2008-12-04 PY - 2008 AN - OPUS4-17824 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klingelhöffer, Hellmuth T1 - Investigation of creep/fatigue properties in gaseous near-service environments focusing on interactions between high temperature corrosion and mechanical loads T2 - 4th EPRI Int. Creep-Fatigue Expert Group Workshop CY - Paris, France DA - 2009-10-05 PY - 2009 AN - OPUS4-19837 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -