TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Identifizierung gefährlich exotherm zersetzlicher Stoffe N2 - Ausgehend von der in der TRAS 410 beschriebenen Notwendigkeit zur Veranlassung besonderer Maßnahmen beim Umgang mit deflagrations- und/oder detonationsfähigen Stoffen werden die Explosionsmechanismen für Stoffe in kondensiertem Zustand beschrieben. Reaktive organische Stoffe sind u. a. anhand ihrer Struktur insbesondere bei Vorhandensein bestimmter funktioneller Gruppen identifizierbar. Durch eine Reihe von international eingeführten Prüfmethoden lassen sich solche Stoffe z. B. hinsichtlich ihrer mehr oder weniger ausgeprägten explosiven Eigenschaften charakterisieren. Anhand konkreter Beispiele werden die Prüfergebnisse erläutert und die Stoffe aufgrund ihrer Eigenschaften klassifiziert. Maßnahmen zur Vermeidung kritischer Zustände bei der Herstellung und Lagerung sowie beim Transport gefährlicher Stoffe werden auch am Beispiel von Unfällen erläutert. T2 - DECHEMA-Weiterbildungskurs "Sicherheit chemischer Reaktionen" CY - Berlin, Germany DA - 14.03.2016 KW - TRAS 410 KW - Deflagrationsfähige Stoffe KW - Detonationsfähige Stoffe PY - 2016 AN - OPUS4-36308 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Explosion-resistant transport and storage containers T2 - IGUS EOS Meeting CY - Nanjing, China DA - 2014-04-09 PY - 2014 AN - OPUS4-30556 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - A standard detonator in line with REACH T2 - IGUS EOS Meeting CY - Nanjing, China DA - 2014-04-09 PY - 2014 AN - OPUS4-30559 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - A Serious Naval Accident - MSC Flaminia (Investigation Report) T2 - IGUS EOS Meeting CY - Nanjing, China DA - 2014-04-09 PY - 2014 AN - OPUS4-30560 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Aktuelle Fragen zur Klassifizierung T2 - IAA-Symposium "Gefahrguttag: Aktuelle Entwicklungen im Gefahrgutrecht und Erhöhung der Sicherheit von Gefahrgutfahrzeugen (mit Demonstration)" CY - Hanover, Germany DA - 2014-09-29 PY - 2014 AN - OPUS4-31588 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rennoch, Detlef A1 - Pasewald-Fischer, Astrid A1 - Schendler, Thomas A1 - Kelle, Frank A1 - Döring, Ingo A1 - Oeleker, Karin A1 - Franke, Werner A1 - Wehrstedt, Klaus-Dieter T1 - Amts- und Mitteilungsblatt, Band 32, Sonderband 1: Empfehlungen für die Beförderung gefährlicher Güter - Handbuch über Prüfungen und Kriterien N2 - Die Empfehlungen dieses Handbuchs über Prüfungen und Kriterien ergänzen die "Empfehlungen für die Beförderung gefährlicher Güter" und die angefügten Modellvorschriften. Sie sind das Ergebnis der Beschlüsse des UN-Sachverständigenausschusses "Beförderung gefährlicher Güter", die auf der dreizehnten (1984), vierzehnten (1986), fünfzehnten (1988), sechszehnten (1990), siebzehnten (1992), achtzehnten (1994), neunzehnten (1996) und zwanzigsten (1998) Sitzung gefasst wurden. Diese 3. überarbeitete Ausgabe enthält die vom Ausschuss auf dessen neunzehnter Sitzung (ST/SG/AC.10/23/Add. 1, Anhang 2) und zwanzigster Sitzung (ST/SG/AC.10/1998/14 und ST/SG/AC.10/25/Add. 1, Teil 3) angenommenen Ergänzungen der vorangegangenen Ausgabe. T3 - Amts- und Mitteilungsblatt der BAM - SB 1/2002 KW - Gefahrgutbeförderung KW - UN-Prüfhandbuch PY - 2002 SN - 3-89701-823-3 SN - 0340-7551 N1 - Diese Ausgabe ist nicht mehr gültig, ein Link auf die nachfolgende Fassung befindet sich im Feld zugeöriger Identifikator. - This edition is no longer valid, a link to the following version is in the field related identifier. VL - 32 IS - Sonderband 1 SP - 1 EP - 407 PB - Wirtschaftsverlag NW CY - Bremerhaven ET - 3. AN - OPUS4-57523 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wilrich, Cordula A1 - Schröder, Volkmar A1 - Brandes, E. A1 - Schmidt, Martin A1 - Wandrey, Peter-Andreas A1 - Mix, K.-H. A1 - Wehrstedt, Klaus-Dieter A1 - Bender, H. A1 - Stephan, U. A1 - Eberz, A. A1 - Steinbach, J. A1 - Stoessel, F. T1 - Plant and process safety - 2. Hazardous materials and process conditions N2 - "Ullmann's Encyclopedia of Industrial Chemistry" is the benchmark reference in chemistry and chemical and life science engineering, covering inorganic and organic chemicals, advanced materials, pharmaceuticals, polymers and plastics, metals and alloys, biotechnology and biotechnological products, food chemistry, process engineering and unit operations, analytical methods, environmental protection, and much more. The present article is part of the topic collection "Environmental Protection and Industrial Safety". It covers plant and process safety, focusing on hazardous materials and process conditions. KW - Flammable gases and vapors KW - Combustibility of liquids KW - Dust explosions KW - Explosive condensed substances KW - Harmful effects of substances KW - Exothermic and pressure-inducing chemical reactions PY - 2012 SN - 978-3-527-30673-2 DO - https://doi.org/10.1002/14356007.q20_q01 SP - 1 EP - 50 PB - Wiley-VCH CY - Weinheim AN - OPUS4-58108 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Explosionskatastrophe von Tianjin 2015 N2 - Am 12. August 2015 kam es in einem Containerlager im Hafen von Tianjin (China) zu einer Serie von Explosionen wobei über 100 Menschen getötet und hunderte Feuerwehrleute und andere verletzt wurden. Die ersten beiden Explosionen ereigneten sich innerhalb von 30 Sekunden. Die zweite Explosion war wesentlich heftiger und beruhte u. a. auf der detonativen Umsetzung von ca. 800 Tonnen Ammoniumnitrat. Zunächst war die Ursache der Explosionen nicht bekannt. Nach einem Untersuchungsbericht der chinesischen Behörden (Februar 2016) war die Ursache eine Überhitzung eines Containers mit Nitrocellulose-Produkten. Zusammen mit Kollegen von der Nanjing University of Science and Technology arbeiteten Kollegen der Abteilung 2 an der Analyse der Gründe für die Explosionen und deren Verlauf basierend auf den Kenntnissen und Erfahrungen bezüglich der Eigenschaften der involvierten Stoffe, insbesondere Ammoniumnitrat und Nitrocellulose, sowie der potentiellen Mechanismen für die Auslösung und Weiterleitung. T2 - Sitzung des ProcessNet-Arbeitsausschusses "Reaktionstechnik sicherheitstechnisch schwieriger Prozesse (AA-RTSSP) CY - Darmstadt, Germany DA - 03.05.2016 KW - Ammoniumnitrat KW - Nitrocellulose KW - Tianjin PY - 2016 AN - OPUS4-36847 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Energetic substances of chemical industries - Basic principles and Overview N2 - Reactive (energetic) organic substances and mixtures may be identified based on the structure particularly by the present groups in molecule associated with explosive or self-reactive properties (examples are e.g. acetylenes, azides, azo compounds, peroxides, etc.). To characterize explosive properties of such substances and mixture many international accepted test methods are available. Exemplary test results are explained and the following classifications according to international regulations for hazardous substances and dangerous goods are discussed. Measures to avoid critical conditions during manufacturing, handling, storage and transport are explained and accidents are analysed. T2 - Lecture at Nanjing University of Science and Technology (NUST) CY - Nanjing, China DA - 19.05.2017 KW - Energetic substances KW - Explosive properties KW - Self-reactive properties KW - Test methods PY - 2017 AN - OPUS4-43049 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Blankenhagel, Paul A1 - Wehrstedt, Klaus-Dieter A1 - Xu, S. A1 - Mishra, K. B. A1 - Steinbach, J. T1 - A new model for organic peroxide fireballs N2 - Organic peroxides are capable to form fireballs with explosive violence. Only fireball models for liquid hydrocarbon fuels are available for the assessment of the thermal radiation properties. Because the development of such fireballs usually differ from those of organic peroxides the properties need to be characterized by modified equations. In this study liquid organic peroxide fireballs from 16 kg to 155 kg substance masses are characterized and compared to selected existing correlations. Flame characteristics and irradiances are measured with infrared cameras and heat flux sensors. All fireballs are consequences of simulated worst case scenarios where filled steel drums are engulfed by fire with varying heat impact. The differences of the given semi-empirical equations and the presented experimental work are explained. A new model is proposed for organic peroxide fireballs by modifying the constants of the known equations. The thermal radiation impact and safety distances are calculated and compared. KW - Organic peroxide KW - Fireball KW - Thermal radiation KW - Safety distances PY - 2017 DO - https://doi.org/10.1016/j.jlp.2017.10.002 SN - 0950-4230 VL - 50 IS - Part A SP - 237 EP - 242 PB - Elsevier Science AN - OPUS4-43069 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Feuerbälle flüssiger organischer Peroxide - neue Ergebnisse aus Großversuchen N2 - Bei thermischer Belastung von flüssigen organischen Peroxiden in metallischen Transportverpackungen können Feuerbälle entstehen, die sich mit immenser explosiver Heftigkeit bilden und hinsichtlich der von ihnen ausgehenden Wärmestrahlungsbelastung sicherheitstechnisch zu bewerten sind. Da sich diese Feuerbälle von flüssigen Kohlenwasserstoffen unterscheiden, wird ein neues Modell vorgestellt, um mittels semi-empirischer Gleichungen insbesondere den Durchmesser und die Standzeit solcher Feuerbälle zu beschreiben und mit herkömmlichen Modellen für Kohlenwasserstoffe zu vergleichen. Es wurden Versuche mit unterschiedlichen Befeuerungsmethoden unter Verwendung von Stahlfässern, befüllt mit bis zu 155 kg DTBP, durchgeführt. Dabei wurde festgestellt, dass abhängig von der Befeuerungsmethode (Holz/Gas) unterschiedlich große Massen DTBP in den sich bildenden Feuerbällen umgesetzt werden (16 kg bis 155 kg). Bei den Experimenten wurden IR-Kameras, Strahlungssensoren und Videokameras eingesetzt. Aufgrund der Messungen und der optischen Auswertungen konnten neue modifizierte Gleichungen unter Anpassung der Konstanten für Kohlenwasserstoffe entwickelt und validiert werden. Weiterhin wurde die Wärmestrahlungsbelastung auf Mensch und Umgebung berechnet und die einzuhaltenden Sicherheitsabstände bestimmt. T2 - ProcessNet Arbeitsausschuss "Reaktionstechnik sicherheitstechnisch schwieriger Prozesse (AA-RTSSP) CY - Berlin, Germany DA - 25.10.2017 KW - Organische Peroxide KW - DTBP KW - Feuerball KW - Wärmestrahlung KW - Sicherheitsabstand PY - 2017 AN - OPUS4-43066 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wilrich, Cordula A1 - Brandes, Elisabeth A1 - Michael-Schulz, Heike A1 - Schröder, Volkmar A1 - Schwarz, Silke A1 - Wehrstedt, Klaus-Dieter T1 - UN GHS ‒ Physical hazard classifications of chemicals: A critical review of combinations of hazard classes N2 - One of the fundamental principles of the UN-GHS (Globally Harmonized System of Classification and Labelling of Chemicals) is that all hazards of a chemical should be assigned and communicated. There is no general prioritization of hazards in the sense that certain hazard classes are not applicable if another one has been assigned. In contrast to health and environmental hazards, there are physical or chemical factors which preclude certain combinations of physical hazard classes. So far, there is no common understanding as to which combinations are relevant and which not. For example, should a pyrophoric liquid be classified as flammable liquid in addition, or is this redundant and unnecessary? In the course of the implementation of the GHS by countries or sectors and the actual application by industry all over the world, such questions become more and more important. This publication systematically discusses all combinations of the UN-GHS physical hazard classes and assesses them with regard to the relevance of possible simultaneous assignment to a chemical. For many of the combinations an unambiguous decision based on theGHS alone is not possible, thus confirming that the question which physical hazard classes might be assigned simultaneously to a chemical is not trivial. As one more milestone on the path to a globally harmonized system for the classification of hazardous chemicals, this should be discussed and ultimately solved on a global basis. It is the hope that this publication might serve as an impetus for such discussions. KW - UN-GHS KW - Globally Harmonized System of Classification and Labelling of Chemicals KW - Hazardous chemicals KW - Chemicals classification KW - Physical hazards PY - 2017 UR - https://www.sciencedirect.com/science/article/pii/S1871553217300336 DO - https://doi.org/10.1016/j.jchas.2017.03.005 SN - 1871-5532 VL - 24 IS - 6 SP - 15 EP - 28 PB - Elsevier Inc. AN - OPUS4-42704 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Energiereiche Stoffe der chemischen Industrie N2 - Übersichtsvortrag: Kurzer Überblick über die BAM und den FB 2.2 Einige Grundlagen Prüfung und Klassifizierung energiereicher Stoffe und Gemische der chemischen Industrie Unfälle/Ereignisse (Auswahl) Forschungsthema “Feuerbälle flüssiger organischer Peroxide” T2 - JungChemikerForum im Rahmen des Chemischen Kolloquiums CY - Jena,Germany DA - 06.12.2017 KW - Energiereich KW - Explosionsmechanismen KW - Prüfung KW - Klassifizierung KW - Unfälle KW - Feuerbälle KW - Organische Peroxide PY - 2017 AN - OPUS4-43506 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Mishra, K. B. A1 - Wehrstedt, Klaus-Dieter ED - Singh, A.P. ED - Agarwal, R. A. ED - Agarwal, A. K. ED - Dhar, A. ED - Shuklar, M. K. T1 - Peroxy-fuels: Burning behavior and potential applications in combustion engines N2 - In present chapter, the potential usage of peroxy-fuels (usually known as organic peroxides) either in technically pure or in a blended form in engine combustion processes are explored. Although as additives (in small quantities <5% to conventional fuels, e.g., diesel, gasoline) peroxy-fuels are well known for many years their commercial applications as a main or primary fuel are not investigated in detail as such except a few. Their thermal instability and energy density demand great care during processing, which restricts their commercial exploitation. However, once the issues with safety are resolved they can be much more advantageously employed than conventional fuels. Some of these advantages are significant amount of fuel saving, reduction in amount of inducted air, or even the complete absence of air, i.e., anaerobic combustion, smaller volume of combustion (chamber), oxygenated fuel quality, and low emissions. An idea to develop the components of an engine operating solely on peroxy-fuels is also introduced. The engine concept is based on single and multiple injectors in a cylinder with special material coating to ensure a temperature-controlled processing. KW - Peroxy-fuels KW - Hydrocarbons KW - Blends KW - Engine combustion KW - Engine performance PY - 2018 SN - 978-981-10-7517-9 DO - https://doi.org/10.1007/978-981-10-7518-6_14 SN - 2522-8366 SN - 2522-8374 SP - 343 EP - 357 PB - Springer Nature Singapore AN - OPUS4-45274 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Update German accident prevention regulation BGV B4 (DGUV 13) - (Organic Peroxides, OP) N2 - Transposition of regulations of the (German) employer’s liability insurance association (BGV’n) into Federal responsibility. Fundamentals are regulated in the German Hazardous Substances Ordinance (GefStoffV). Prospectively, some definitions and more details are specified in a Technical Rule (TRGS 741 „Organic Peroxides“). A second project outline was discussed in 2014; because of some formal objections concerning the process and, particularly, the membership in a project group, no progress et al. since 2014. Nevertheless, the BGV B4 is still valid. Because of some new findings and new test results a revision and Supplementation of the table of assignments of OP to risk (storage) groups was required. T2 - IGUS EOS Meeting CY - Shangahi, China DA - 09.04.2018 KW - Substances KW - GefStoffV KW - Risk groups KW - BGV PY - 2018 AN - OPUS4-45275 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Organic peroxide fireballs - Report of progress N2 - Summary of recent research activities at BAM concerning large scale fireballs of organic peroxides (OP). Videos of the tests performed in Nanjing, China, are presented. A new model for OP fireball diameter, duration, height and SEP is proposed based on all experiments. In addition, small scale test results using DTBP and heptane are presented. Finally, CFD simulation is used to predict the fireball parameters: diameter, duration and height. T2 - IGUS EOS Meeting CY - Shanghai, China DA - 09.04.2018 KW - Fireball KW - Organic peroxide KW - Thermal radiation KW - Safety distances PY - 2018 AN - OPUS4-45276 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Blankenhagel, Paul A1 - Wehrstedt, Klaus-Dieter A1 - Steinbach, J. A1 - Mishra, K. B. T1 - Thermal radiation assessment of fireballs using infrared camera N2 - The thermal radiation impact of organic peroxide fireballs is experimentally assessed using an infrared camera. Fireballs are generated while liquid peroxide filled steel drums are subjected to gas burner fire at different heating rates. Three large burning clouds are observed with varying flame characteristics. Thermal radiation properties are assessed by infrared images with the presented methods. Despite of the two-dimensional temperature fields, the flames are treated and characterized as three-dimensional objects. Fireball diameters and heights are calculated based on a representing radiating sphere with the same cloud volume. By the use of the solid flame model and assumptions for emissivity and transmissivity, heat fluxes and thermal radiation doses against distance are predicted. Thermal safety distances are presented based on the maximum irradiance and the allowed exposure time. The validation of the maximum and time-dependent radiation fields is achieved through heat flux sensors in varying distances to the fireball. The results prove the use of an infrared camera and a volume based size calculation to fully assess the thermal radiation hazards of fireballs. KW - Fireball KW - Thermal radiation KW - Infrared camera KW - Organic peroxide KW - Safety distances PY - 2018 DO - https://doi.org/10.1016/j.jlp.2018.04.008 SN - 0950-4230 VL - 54 SP - 246 EP - 253 PB - Elsevier AN - OPUS4-45277 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Blankenhagel, Paul A1 - Wehrstedt, Klaus-Dieter A1 - Steinbach, J. T1 - Auswirkungen hoher thermischer Belastungen auf flüssige organische Peroxide in Metallbehältern N2 - Im Gegensatz zu thermisch instabilen Kunststoffverpackungen garantieren Metallbehälter auch bei hoher thermischer Belastung, beispielsweise durch ein Schadenfeuer, einen stetigen Wärmeeintrag. Ist ein flüssiges organisches Peroxid enthalten, wird durch die Wärme eine sich selbst-beschleunigende exotherme Zersetzung initiiert. Das mit der Entzündung der Zersetzungsgase entstehende Feuer brennt durch den kontinuierlichen äußeren Wärmeeintrag heftiger als dies bei Poolfeuern organischer Peroxide zu beobachten ist. Aufgrund des definierten Einschlusses einer Metallverpackung kann die Zersetzung explosionsartig ablaufen und zur Ausbildung ein- und mehrfacher Feuerbälle führen. Auswirkungsbetrachtungen eines mit flüssigem organischen Peroxid befüllten und von außen befeuerten 220 Liter Stahlfasses wurden anhand zahlreicher Versuche mit unterschiedlichen Aufheizmethoden durchgeführt und sowohl die ermittelten Abbrandraten als auch die gemessenen thermischen Strahlungsbelastungen mit denen eines Poolfeuers verglichen. Die Analyse des Gefahrenpotentials unterschiedlich großer Feuerbälle führte schließlich zur Entwicklung eines ersten semi-empirischen Modells zur Abschätzung des Durchmessers und der Abbranddauer von Feuerbällen organischer Peroxide. Daraus ergibt sich die Möglichkeit der Berechnung notwendiger thermischer Sicherheitsabstände. KW - organische Peroxide KW - Feuerball KW - Poolfeuer KW - thermische Strahlung PY - 2018 UR - https://www.technische-sicherheit.de/ts/article.php?data[article_id]=89192 SN - 2191-0073 VL - 8 IS - 4 SP - 11 EP - 16 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-45279 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter A1 - Wilrich, Cordula T1 - UN GHS ‒ Physical hazard classifications of chemicals: A critical review of combinations of hazard classes N2 - One of the fundamental principles of the UN-GHS (Globally Harmonized System of Classification and Labelling of Chemicals) is that all hazards of a chemical should be assigned and communicated. There is no general prioritization of hazards in the sense that certain hazard classes are not applicable if another one has been assigned. In contrast to health and environmental hazards, there are physical or chemical factors which preclude certain combinations of physical hazard classes. So far, there is no common understanding as to which combinations are relevant and which not. For example, should a pyrophoric liquid be classified as flammable liquid in addition, or is this redundant and unnecessary? In the course of the implementation of the GHS by countries or sectors and the actual application by industry all over the world, such questions become more and more important. For many of the combinations an unambiguous decision based on theGHS alone is not possible, thus confirming that the question which physical hazard classes might be assigned simultaneously to a chemical is not trivial. As one more milestone on the path to a globally harmonized system for the classification of hazardous chemicals, this should be discussed and ultimately solved on a global basis. It is the hope that this presentaion might serve as an impetus for such discussions. T2 - IGUS EOS Meeting CY - Shanghai, China DA - 09.04.2018 KW - Chemicals classification KW - Globally harmonized system of classification and labelling of chemicals KW - Hazardous chemicals KW - Physical hazards KW - UN-GHS PY - 2018 AN - OPUS4-45002 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Prediction of SADT - Correlation with DSC measurements N2 - Self-Accelerating Decomposition Temperature (SADT) is a safety characteristic for the transport of self-reactive substances and organic peroxides. Its determination is time-consuming and in dependence on the test method also material-consuming. As shown previously, DSC measurements, which can be carried out fast and with a few milligram of material, supply a good correlation with SADT for technical pure, liquid organic peroxides. The approach is now applied for solid organic peroxides. Besides, the parameters, which are involved in the correlation, are discussed and their effect on the result is weighted qualitatively. In addition it was shown, that the method is inapplicable in an easy manner for diluted organic peroxides and pure self-reactive substances. T2 - IGUS EOS Meeting CY - Shanghai, China DA - 09.04.2018 KW - SADT KW - DSC PY - 2018 AN - OPUS4-46571 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Blankenhagel, Paul A1 - Wehrstedt, Klaus-Dieter A1 - Steinbach, J. T1 - Spiel mit dem Feuerball N2 - In der Regel verbrennen organische Peroxide (OP) aufgrund ihrer Eigenschaften noch viel heftiger als Flüssigkohlenwasserstoffe. Ein anderes Verhalten wird auch bei der Entstehung und dem Abbrand von Feuerbällen beobachtet. Anhand von Großversuchen an 220-Liter-Stahlfässen wird das Verhalten von OP-Feuerbällen am Beispiel von Di-tert-butyl Peroxid (DTBP) untersucht. Bei der Simulation unterschiedlicher Worst-Case-Szenarien, d.h. unterschiedlicher Außenfeuer, entstehen aufgrund der Selbstzersetzungsprozesse des Peroxids unterschiedlich große, sich explosionsartig ausbildende Feuerbälle. Durch die Charakterisierung u.a. mittels Wärmebildtechnik konnten neue semi-empirische Ansätze für Berechnung der Wärmestrahlung von DTBP-Feuerbällen entwickelt werden. Diese helfen angemessene Schutz- und Sicherheitsabstände im Vorfeld für Produktions- und Verarbeitungsbetriebe zu bestimmen. KW - Feuerbälle KW - thermische Strahlung KW - organische Peroxide KW - Sicherheitsabstand PY - 2018 SN - 0016-5808 VL - 10 SP - 28 EP - 31 PB - Storck Verlag CY - Hamburg AN - OPUS4-46573 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Identifizierung gefährlicher exotherm zersetzlicher Stoffe T2 - DECHEMA-Weiterbildungskurs "Sicherheit chemischer Reaktionen" CY - Berlin, Deutschland DA - 2015-03-23 PY - 2015 AN - OPUS4-33003 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Martin A1 - Wehrstedt, Klaus-Dieter A1 - Seifert, Alexander A1 - Bulin, Michael T1 - Sicherheitstechnische Kenngrößen brennbarer Stäube in Datenbanken - Besonderheiten, Anwendungsgrenzen, Bandbreiten N2 - Während die Gefahr von Explosionen dort besteht, wo Stäube aufgewirbelt vorliegen, bergen abgelagerte Stäube das Risiko von Bränden. Die Beurteilung daraus entstehender Gefahren und das Auslegen von vorbeugenden und konstruktiven Schutzmaßnahmen erfolgt über sicherheitstechnische Kenngrößen (STK). Diese lagen bislang in Datenbanken nur in Einzelwerten vor und wurden nun zu Gruppen zusammengefasst. Das Besondere daran: Erstmals werden nun bewertete Bandbreiten angegeben, in denen sich die STK der Stäube bewegen. KW - Brennbare Stäube KW - Kenngrößen KW - Staubexplosionen KW - Brände PY - 2015 SN - 0946-7939 VL - 21 IS - 2 SP - 56 EP - 60 PB - Vogel Trans Tech Publications CY - Würzburg AN - OPUS4-33119 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Simon A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter T1 - CFD simulations to predict the thermal safety distances from jet fires of peroxy-fuels N2 - CFD (Computational Fluid Dynamics) simulations have been carried out to investigate the behavior of turbulent, subsonic jet fires of the peroxy-fuel Di-tert-butyl peroxide (DTBP) using the SAS-SST turbulence model, the discrete transfer radiation model, the eddy dissipation combustion model and the Magnussen soot model. Safety relevant parameters, such as flame length, temperature and thermal radiation are predicted to give recommendations on safety distances. T2 - 4. Magdeburger Brand- und Explosionsschutztag / 3. vfdb-Workshop Brandschutzforschung CY - Magdeburg, Germany DA - 26.03.2015 KW - CFD simulations KW - Thermal safety distances KW - Jet fires KW - Peroxy-fuels PY - 2015 SN - 978-3-00-048960-0 SP - 1 EP - 12 AN - OPUS4-33283 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter T1 - Rheinland refinery accident 2014: CFD prediction of atmospheric dispersion of smoke N2 - Industrial fire and explosion hazards are most often also associated with the dispersion of toxic substances. These substances can be gases, liquids, solids or in form of aerosols. The critical toxic exposure limits to People and enviroment from such substances are regulated by the concerned authorities of the countries. In order to comply with the defined regulation estimation of such critical limits must be carried out by different semi-empirical and phenomenological models/methods for risk assessment. Many of such methods provide a qualitative estimation of time and space dependent extrimities of toxicity. The overwhelm development of computational capacity has made it possible to perform Computational Fluid Dynamics (CFD) simulation by solving the three-dimensional transport equations for mass momentum and species in lower and upper atmosphere, respectively. CFD simulation not only provides a detailed 3D distribution of toxic particulates/gases in the neighbourhood of the plant but also helps to study the worst-case sceanrios. In the past several small- and large-scale accidents occured in oil and gas plants in different parts of the world including the recent one in Rheinland refinery near Cologne in Germany. This work deals with this accident and provides a methodology to predict the critical exposure limits of smoke emitted by a toluene tank fire by means of CFD simulation. T2 - COMBURA 2014 - Combustion research and application symposium CY - Soesterberg, The Netherlands DA - 08.10.2014 KW - CFD KW - Retinery incident KW - Smoke dispersion PY - 2014 SP - 56 EP - 57 AN - OPUS4-31721 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Portius, P. A1 - Filippou, A.C. A1 - Schnakenburg, G. A1 - Davis, M. A1 - Wehrstedt, Klaus-Dieter T1 - Taming the silicon tetraazide beast N2 - Highly energetic silicon tetraazide 1 is synthesized safely in high yield and high purity. The compound is prepared as a solution in benzene which allows it to be handled safely. Stable Lewis base adducts of Si(N3)4 (e.g. 2) are also prepared by treatment of either Si(N3)4 or the di­sodium salt of hexaazidosilicate (3) with Lewis bases (2,2-bipyridine or 1,10-phenanthroline). Unlike Si(N3)4 the Lewis base adduct 2 is thermally stable and does not decompose below 265 °C. The decomposition is very energetic (ΔHd = -2.4 kJg-1) which means 2 and related Lewis base ­adducts could replace environmentally harmful Pb(N3)4 used as primary explosive. KW - Highly energetic silicon tetraazide KW - Lewis base adducts KW - Azides KW - Silicon KW - Energetic materials PY - 2011 DO - https://doi.org/10.1055/s-0030-1259150 SN - 1861-1958 VL - 1 SP - 0043 EP - 0043 PB - Thieme CY - Stuttgart AN - OPUS4-32352 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Einstufung, Kennzeichnung und Verpackung von Stoffen und Gemischen T2 - Besuch einer chinesischen Delegation in der BAM (über die Europa Akademie, 64546 Mörfelden-Walldorf, Frankfurt/Main) CY - Berlin, Deutschland DA - 2014-12-16 PY - 2014 AN - OPUS4-32337 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Development of burning rate tests for liquid and solid organic peroxides T2 - 2014 Global Organic Peroxide Meeting CY - Washington, D.C., USA DA - 2014-05-13 PY - 2014 AN - OPUS4-30689 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Pool fires - mixed involving organic peroxides T2 - 2014 Global Organic Peroxide Meeting CY - Washington, D.C., USA DA - 2014-05-13 PY - 2014 AN - OPUS4-30691 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Safety Related Properties of Gases - Division 2.1 ,,Gases, Gas Plants" T2 - Meeting at Korea Gas Saftey Cooperation CY - Chungchongbuk-do, South Korea DA - 2014-04-14 PY - 2014 AN - OPUS4-30693 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krause, G. A1 - Wehrstedt, Klaus-Dieter A1 - Malow, Marcus A1 - Budde, K. A1 - Mosler, J. T1 - Safe transport of acrylic acid in railroad tank cars. Part 1: Determination of the self-accelerating decomposition temperature N2 - Experiments according to a test specified in the UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria, and numerical simulations by means of a finite element method are employed to determine the self-accelerating decomposition temperature of acrylic acid in a railroad tank car. The results demonstrate that the transport of acrylic acid in big tank cars is safe as long as some basic conditions are taken into account. KW - Acrylic acid KW - Dangerous goods KW - Finite element method KW - Railway transport KW - Self-accelerating decomposition temperature PY - 2014 DO - https://doi.org/10.1002/ceat.201300778 SN - 0930-7516 SN - 1521-4125 VL - 37 IS - 9 SP - 1460 EP - 1467 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-31298 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Should Self-reactive Substances Type G be Candidates for Transport Division 4.2? T2 - Ad hoc EOS Meeting CY - Frankfurt am Main, Germany DA - 2014-01-28 PY - 2014 AN - OPUS4-30262 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Schuurman, P. A1 - Hoeijmakers, P.M.M. T1 - Comments on 'thermal decomposition kinetic evaluation and its thermal hazards prediction of AIBN, by S. Guo, W. Wan, C. Chen and W.H. Chen' (Journal of thermal analysis and calorimetry (2013) 113:1169-1176, DOI 10.1007/s10973-013-2993-7) N2 - We read the paper by Guo et al. [1] with interest. The authors have investigated the thermal decomposition kinetics and thermal hazards of 2,2′-azobis(isobutyronitrile), AIBN, by differential scanning calorimetry (DSC) and used the Advanced Kinetics and Technology Solutions (AKTS) software to predict the thermal stability of AIBN in ton and kg scale. The main conclusion of interest is that the self-accelerating decomposition temperature (SADT) of a 50-kg standard package is 63 °C. PY - 2014 DO - https://doi.org/10.1007/s10973-014-3897-x SN - 1388-6150 SN - 1418-2874 SN - 0368-4466 SN - 1572-8943 VL - 117 IS - 3 SP - 1015 EP - 1016 PB - Kluwer Academic Publ. CY - Dordrecht AN - OPUS4-31251 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter T1 - Spill-over characteristics of peroxy-fuels: Two-phase CFD investigations N2 - Two-phase CFD (Computational Fluid Dynamics) model for characterising the spill-over/dispersion of peroxy-fuels is presented. The model is independent of type and burning rate of the spilled/dispersed fuel and considers only overflow Reynolds number (Re) to characterise the spill/dispersion behaviour. Additional simulations are performed for LNG (Liquified Natural Gas) dispersion and it is found that the model can be used for different fuels within a defined range of Re. Different scenarios with Re = 100 to 3 × 105 are investigated covering a wide range of mass flow rates, opening sizes and viscosities. Depending on Lower Flammability Limits (LFL) of the fuels spill/dispersion (vapour cloud) diameters (DCFD) and heights (hCFD) are predicted. A generalised correlation between DCFD and Re is established to predict the dispersion occurring at varying scales. The model is validated by: (1) conducting an extensive grid independent study; (2) comparing the results with the existing analytical methods and (3) comparing against the standard field test data on LNG dispersions. KW - Spill-over KW - Dispersion KW - Peroxy-fuels KW - CFD KW - Reynolds number KW - Liquefied natural gas PY - 2014 DO - https://doi.org/10.1016/j.jlp.2014.02.014 SN - 0950-4230 SN - 1873-3352 VL - 29 SP - 186 EP - 197 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-30481 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Schönbucher, A. A1 - Wehrstedt, Klaus-Dieter A1 - Bockhorn, H. A1 - Schälike, Stefan A1 - Sebbar, N. T1 - Abschätzung des Gefahrenpotentials von wechselwirkenden Bränden beim Umgang mit entzündbaren und selbst zersetzlichen Flüssigkeiten in verfahrenstechnischen Anlagen - Schlussbericht zu dem IGF-Vorhaben Nr. 396 N2 - Mechanical drop test scenarios for Type B (U) packages according to the IAEA regulations have to be carried out onto the so-called “unyielding target” (usually with cask impact limiters) and onto the puncture bar respectively. They are predefined and do not require any further investigation of scenarios that really could happen on transportation routes. Cask accident scenarios in the framework of approval procedures for interim storage sites are derived from a detailed analysis of the handling procedures necessary from arrival of cask at the site to its storing position. In that case, casks are usually handled without impact limiters. Dependent on possible drop heights, drop positions and floor properties, conservative cask accident scenarios are derived for further safety proofs. According to the mechanical assessment concept of the considered approval procedure numerical calculations have to be provided by the applicant to demonstrate mechanical cask safety. Stresses and strains in the cask body as well as in the lid System have to be identified and assessed. Using the example of a 3-mvertical-drop of a transport and storage cask for spent fuel elements onto the floor construction made of damping concrete covered by screed, BAM developed a finite element model. The finite element code ABAQUS/Explicit™ was used. Results of experimental investigations are not available. Therefore parameter studies are necessary to identify the sensitivity of the finite element model to significant Parameters and to verify the finite element models according to the requirements of the Guidelines for the Numerical Safety Analyses for the Approval of Transport and Storage Casks for Radioactive Materials (BAM GGR-008). The paper describes the modeling of the material behavior and attachment of bottom side cask components. Questions concerning the modeling of a crack length limiting reinforcement in the screed layer are discussed. The influence of the mesh density of the screed layer and its strength is considered as well. Finally, the developed finite element model can be used for a numerical safety assessment. It can help to understand the complex mechanisms of the interaction between the cask components and floor construction. PY - 2014 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-317195 DO - https://doi.org/10.13140/2.1.4328.1928 SP - 1 EP - 47 PB - DECHEMA CY - Frankfurt am Main AN - OPUS4-31719 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mishra, K. B. A1 - Wehrstedt, Klaus-Dieter A1 - Krebs, Holger T1 - Prediction of overpressure in buried gas pipeline explosions N2 - The explosion and fire incidents with buried gas pipelines are increasing globally e.g. San Bruno (USA, 2010), East Godavari (India, 2014) and Ludwigshafen (Germany, 2014) are only a few to quote. There are a number of parameters involved behind the occurrence of these incidents such as human mistake, intended efforts leading to major or minor leak, explosion due to depressurization, crater formation, spill of gaseous fuel in the nearby regions and pool/jet/crater fires. In continuation to [3] these parameters are investigated for Ludwigshafen incident in the present work. The semi-empirical and advanced CFD (Computational Fluid Dynamics) based models are utilized to assess the damages caused by the explosion overpressures. Recommendations are also provided on minimum safety distance to be considered for such pipelines to avoid/foresee/mitigate similar hazards in future. T2 - 5. Brand- und Explosionsschutztage 2017 CY - Magdeburg, Germany DA - 23.03.2017 KW - Buried gas pipeline KW - Explosion KW - Overpressure KW - CFD-Model KW - Safety distance PY - 2017 SN - 978-3-00-056201-3 DO - https://doi.org/10.978.300/0562013 SP - 1 EP - 8 AN - OPUS4-40193 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Störfall – Lagerexplosion in Tianjin 2015 N2 - Am 12. August 2015 kam es in einem Containerlager im Hafen von Tianjin (China) zu einer Serie von Explosionen wobei 173 Menschen getötet und 797 verletzt wurden (Feuerwehrleute und andere Personen). Die ersten beiden Explosionen ereigneten sich innerhalb von 30 Sekunden. Die zweite Explosion war wesentlich heftiger und beruhte u. a. auf der detonativen Umsetzung von ca. 800 Tonnen Ammoniumnitrat. Nach einem Untersuchungsbericht der chinesischen Behörden (Februar 2016) war die Ursache eine Überhitzung eines Containers mit Nitrocellulose-Produkten. Zusammen mit Kollegen von der Nanjing University of Science and Technology arbeiteten Kollegen der Abteilung 2 an der Analyse der Gründe für die Explosionen und deren Verlauf basierend auf den Kenntnissen und Erfahrungen bezüglich der Eigenschaften der involvierten Stoffe, insbesondere Ammoniumnitrat und Nitrocellulose, sowie der potentiellen Mechanismen für die Auslösung und Weiterleitung. Beschrieben werden die in Umgang, insbesondere die Lagerung, von Ammoniumnitrat und Nitrocellulose-Produkten. T2 - 11. Erfahrungsaustausch für Sachverständige nach § 29a BImSchG und Störfallbeauftragte CY - Augsburg, Germany DA - 06.04.2017 KW - Ammoniumnitrat KW - Cellulosenitrat KW - Nitrozellulose KW - Lagerung KW - Explosion KW - Detonation KW - Schutzabstände KW - Gefahrgüter KW - Gefahrstoffe PY - 2017 AN - OPUS4-39988 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Identifizierung gefährlich exotherm zersetzlicher Stoffe N2 - Ausgehend von der in der TRAS 410 beschriebenen Notwendigkeit zur Veranlassung besonderer Maßnahmen beim Umgang mit deflagrations-und/oder detonationsfähigen Stoffen werden die Explosionsmechanismen für Stoffe in kondensiertem Zustand beschrieben. Reaktive organische Stoffe sind u. a. anhand ihrer Struktur insbesondere bei Vorhandensein bestimmter funktioneller Gruppen identifizierbar. Durch eine Reihe von international eingeführten Prüfmethoden lassen sich solche Stoffe z. B. hinsichtlich ihrer mehr oder weniger ausgeprägten explosiven Eigenschaften charakterisieren. Anhand konkreter Beispiele werden die Prüfergebnisse erläutert und die Stoffe aufgrund ihrer Eigenschaften klassifiziert. Maßnahmen zur Vermeidung kritischer Zustände bei der Herstellung und Lagerung sowie beim Transport gefährlicher Stoffe werden auch am Beispiel von Unfällen erläutert. T2 - DECHEMA-Weiterbildungskurs „Sicherheit chemischer Reaktionen“ CY - Berlin, Germany DA - 20.03.2017 KW - Exotherme Reaktion KW - TRAS 410 KW - Deflagration KW - Detonation KW - Wärmeexplosion PY - 2017 AN - OPUS4-39990 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Blankenhagel, Paul A1 - Wehrstedt, Klaus-Dieter A1 - Mishra, K. B. A1 - Steinbach, J. T1 - Prediction of organic peroxide fireball characteristics using CFD simulation N2 - Single and multiple fireballs of di-tert-butyl peroxide are numerically investigated using ANSYS CFX. Calculations contain varying inlet conditions, scale-adaptive shear stress turbulence modeling and one-step combustion reaction on a three-dimensional hexahedral mesh. Time-resolved flame temperatures, sizes and thermal radiation are compared to experimental results. There, fireballs were generated by fire engulfment of steel drums containing 200 l substance. After a vigorous burning, the remaining peroxide forms single and multiple fireballs involving 10 % to 20 % of the initial amount. The comparison of all simulations and two selected experiments show the special numerical treatment required for organic peroxides. Finally, the numerical predictions of irradiance in 30 m distance to the fire show a good agreement for both experiments. This proves the use of CFD as an appropriate method for thermal hazard assessment and the prediction of safety distances for organic peroxide fireballs. T2 - 8th European Combustion Meeting 2017 CY - Dubrovnik, Croatia DA - 18.04.2017 KW - Organic peroxide KW - DTBP KW - Fireball KW - Steel drum KW - Simulation PY - 2017 SN - 978-953-59504-1-7 AN - OPUS4-39992 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Blankenhagel, Paul A1 - Wehrstedt, Klaus-Dieter A1 - Mishra, K. B. A1 - Steinbach, J. T1 - Fireballs as a possible hazard scenario of organic peroxides in steel drums N2 - To simulate a full fire engulfment during transportation or storage a closed removable head steel drum filled with 200 l Di-tert-butyl peroxide (DTBP) is subjected to a wood fire. Due to the enormous heat flux and the exothermic self-decomposition large flames arise and finally multiple fireballs occur. The fireballs consume up to 20 % of the total mass (20 % equals to 31 kg). They are characterized by high surface emissive power and large flames associated with high thermal radiation causing spontaneous ignition of objects in the surrounding. The measured sizes of the DTBP fireballs are smaller compared to the results of the general equations for hydrocarbon fireballs. Because these equations are recommended by the Health and Safety Executive (UK) to be applicable for organic peroxides explicit comparisons of DTBP with LPG, diesel and gasoline concerning the characteristics of fireballs are carried out. Also the burning time is compared and confirms a faster combustion of the peroxide. Moreover, the development of size and emissive power for DTBP and diesel fireballs are compared in a normalized graph. The results provide the assumption that new empirical models are required to be developed for hazard assessment of organic peroxide fireballs. T2 - 5. Brand- und Explosionsschutztage 2017 CY - Magdeburg, Germany DA - 23.03.2017 KW - Organic peroxide KW - DTBP KW - Fireball KW - Steel drum KW - Simulation PY - 2017 SN - 978-3-00-056201-3 DO - https://doi.org/10.978.300/0562013 VL - 2017 SP - 1 EP - 9 PB - Otto-von-Guericke-Universität CY - Magdeburg AN - OPUS4-39994 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Die Explosionskatastrophe von Tianjin 2015 - eine Analyse N2 - Am 12. August 2015 kam es in einem Containerlager im Hafen von Tianjin (China) zu einer Serie von Explosionen wobei 173 Menschen getötet und 797 verletzt wurden (Feuerwehrleute und andere Personen). Die ersten beiden Explosionen ereigneten sich innerhalb von 30 Sekunden. Die zweite Explosion war wesentlich heftiger und beruhte u. a. auf der detonativen Umsetzung von ca. 800 Tonnen Ammoniumnitrat. Nach einem Untersuchungsbericht der chinesischen Behörden (Februar 2016) war die Ursache eine Überhitzung eines Containers mit Nitrocellulose-Produkten. Zusammen mit Kollegen von der Nanjing University of Science and Technology arbeiteten Kollegen der Abteilung 2 an der Analyse der Gründe für die Explosionen und deren Verlauf basierend auf den Kenntnissen und Erfahrungen bezüglich der Eigenschaften der involvierten Stoffe, insbesondere Ammoniumnitrat und Nitrocellulose, sowie der potentiellen Mechanismen für die Auslösung und Weiterleitung. Beschrieben werden die in Umgang, insbesondere die Lagerung, von Ammoniumnitrat und Nitrocellulose-Produkten. T2 - Besuch einer chinesischen Delegation zu Arbeitssicherheit in Kooperation mit der Europa Akademie e.V. CY - Berlin, Germany DA - 14.11.2016 KW - Ammoniumnitrat KW - Cellulosenitrat Nitrozellulose KW - Lagerung KW - Explosion KW - Detonation KW - Schutzabstände KW - Gefahrgüter KW - Gefahrstoffe PY - 2016 AN - OPUS4-39100 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Einstufung, Kennzeichnung und Verpackung von Stoffen und Gemischen N2 - BAM Abteilung „Chemische Sicherheitstechnik“, das Global harmonisierte System zur Einstufung und Kennzeichnung von Chemikalien (UN GHS: United Nations Globally Harmonized System of Classification, Labelling and Packaging of Chemicals), die Verordnung über die Einstufung, Kennzeichnung und Verpackung von Stoffen und Gemischen (CLP steht für die Abkürzung der englischen Begriffe classification, labelling and packaging), die Verordnung zur Registrierung, Bewertung, Zulassung und Beschränkung chemischer Stoffe. (REACH: Registration, Evaluation, Authorization and Restriction of Chemicals). T2 - Besuch einer chinesischen Delegation zu Arbeitssicherheit in Kooperation mit der Europa Akademie e.V. CY - Berlin, Germany DA - 14.11.2016 KW - Einstufung und Kennzeichnung von Chemikalien KW - UN GHS KW - CLP-Verordnung KW - REACH KW - Physikalische Verfahren PY - 2016 AN - OPUS4-39101 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Die Explosionskatastrophe von Tianjin 2015 N2 - Am 12. August 2015 kam es in einem Containerlager im Hafen von Tianjin (China) zu einer Serie von Explosionen wobei 173 Menschen getötet und 797 verletzt wurden (Feuerwehrleute und andere Personen). Die ersten beiden Explosionen ereigneten sich innerhalb von 30 Sekunden. Die zweite Explosion war wesentlich heftiger und beruhte u. a. auf der detonativen Umsetzung von ca. 800 Tonnen Ammoniumnitrat. Nach einem Untersuchungsbericht der chinesischen Behörden (Februar 2016) war die Ursache eine Überhitzung eines Containers mit Nitrocellulose-Produkten. Zusammen mit Kollegen von der Nanjing University of Science and Technology arbeiteten Kollegen der Abteilung 2 an der Analyse der Gründe für die Explosionen und deren Verlauf basierend auf den Kenntnissen und Erfahrungen bezüglich der Eigenschaften der involvierten Stoffe, insbesondere Ammoniumnitrat und Nitrocellulose, sowie der potentiellen Mechanismen für die Auslösung und Weiterleitung. Beschrieben werden die in Umgang, insbesondere die Lagerung, von Ammoniumnitrat und Nitrocellulose-Produkten. T2 - 16. Euroforum-Jahrestagung "Chemie- und Industrieparks" CY - Frankfurt/Main, Germany DA - 08.11.2016 KW - Ammoniumnitrat KW - Cellulosenitrat Nitrozellulose KW - Lagerung KW - Explosion KW - Detonation KW - Schutzabstände KW - Gefahrgüter KW - Gefahrstoffe KW - Vorschriften in Deutschland PY - 2016 AN - OPUS4-39102 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Die Explosionskatastrophe von Tianjin 2015 – Analyse und Bewertung N2 - Am 12. August 2015 kam es in einem Containerlager im Hafen von Tianjin (China) zu einer Serie von Explosionen wobei 173 Menschen getötet und 797 verletzt wurden (Feuerwehrleute und andere Personen). Die ersten beiden Explosionen ereigneten sich innerhalb von 30 Sekunden. Die zweite Explosion war wesentlich heftiger und beruhte u. a. auf der detonativen Umsetzung von ca. 800 Tonnen Ammoniumnitrat. Nach einem Untersuchungsbericht der chinesischen Behörden (Februar 2016) war die Ursache eine Überhitzung eines Containers mit Nitrocellulose-Produkten. Zusammen mit Kollegen von der Nanjing University of Science and Technology arbeiteten Kollegen der Abteilung 2 an der Analyse der Gründe für die Explosionen und deren Verlauf basierend auf den Kenntnissen und Erfahrungen bezüglich der Eigenschaften der involvierten Stoffe, insbesondere Ammoniumnitrat und Nitrocellulose, sowie der potentiellen Mechanismen für die Auslösung und Weiterleitung. Beschrieben werden die in Umgang, insbesondere die Lagerung, von Ammoniumnitrat und Nitrocellulose-Produkten. T2 - Besuch einer chinesischen Delegation CY - Bonn, Germany DA - 16.11.2016 KW - Ammoniumnitrat KW - Cellulosenitrat Nitrozellulose KW - Lagerung KW - Explosion KW - Detonation KW - Schutzabstände KW - Gefahrgüter KW - Gefahrstoffe PY - 2016 AN - OPUS4-39103 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Self-Accelerating Decomposition Temperature (SADT) von Azobisisobutyronitril (AIBN) N2 - Im Vortrag wird über Untersuchungen zur thermischen Stabilität (Bestimmung der SADT = Self-Accelerating Decomposition Temperature) von 2,2‘-Azobisisobutyronitril (AIBN) in realen Packstücken unterschiedlicher Größe sowie in Dewar-Gefäßen berichtet. Die Packstücke mit 5 kg, 20 kg bzw. 50 kg AIBN wurden nach der UN-Methode H.4 untersucht, die Versuche mit den Dewar-Gefäßen nach UN-Methode H.4. Zusätzlich wurden experimentelle Daten mittels DSC (Differential Scanning Calorimetry) unter Verwendung druckfester Gefäße bestimmt. Die experimentellen Daten wurden für weitergehende Untersuchungen/Simulationen unter Verwendung realer kinetischer Modelle bereitgestellt. Letztendlich konnte nachgewiesen werden, dass mittels Simulation die SADT von AIBN in Abhängigkeit von der Packstückgröße sehr genau, d. h. in guter Übereinstimmung mit den Packstückversuchen, bestimmt werden kann. T2 - ProcessNet-Arbeitsausschusses Reaktionstechnik sicherheitstechnisch schwieriger Prozesse CY - Darmstadt, Germany DA - 03.05.2016 KW - thermische Stabilität KW - SADT KW - 2,2‘-Azobisisobutyronitril (AIBN) KW - UN-Methode H.4 PY - 2016 AN - OPUS4-37190 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - CFD based reproduction of Amuay refinery accident 2012 N2 - Amuay accident 2012 is one of similar accidents happened in Buncefield (2005), Jaipur and Puerto Rico (2009), respectively. Since experimental reproduction of such accidents is not always possible numerical simulations help a lot to understand the scenarios on qualitative basis. In this work the accident is reproduced with a CFD model which takes into account the heaviness of the gas (LPG), wind and gravity driven spread. The leak was reported to be located near a number of spherical tanks. The ignition source was presumably the running vehicles on a nearby street. A part of the refinery containing the locations of leakage and ignition was considered as computational domain. The road is located at the eastern boarder. The area contains different tanks, whose height was estimated due to a lack of available data. The diameter was extrapolated from the available image data. Further, a grid of walls is located between a number of tanks. The total domain has a size of 750 m x 400 m x 50 m. An unstructured mesh was created using tetrahedral elements with prism layers at the ground to improve mesh quality in the boundary layer. The mesh has a total number of 775 686 cells. T2 - 15th Internation Symposium in Loss Prevention and Safety Promotion in the Process Industries CY - Freiburg, Germany DA - 05.06.2016 KW - CFD PY - 2016 AN - OPUS4-37195 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Salg, Steffen A1 - Wehrstedt, Klaus-Dieter A1 - Michael-Schulz, Heike A1 - Malow, Marcus A1 - Schomäcker, R. T1 - Die Deflagration von Azodicarbonamid unter verschiedenen Umgebungsbedingungen N2 - Azodicarbonamid (ADCA) ist ein bekanntermaßen deflagrationsfähiger Stoff, der in der Kunststoffindustrie als Treib- und Blähmittel eingesetzt wird. In diesem Beitrag wird die Deflagration von ADCA unter verschiedenen Bedingungen betrachtet. Es werden Ergebnisse von Experimenten in offenen und geschlossenen Systemen präsentiert. In geschlossenen Systemen wurde die Zusammensetzung der umgebenden Atmosphäre von Luft mit Umgebungsdruck über Luft mit Unter- und Überdruck hin zu Stickstoff mit Umgebungsdruck variiert. Um das Deflagrationsrisiko zu reduzieren wird eine Verarbeitung von ADCA im Vakuum vorgeschlagen. T2 - 14. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Berlin, Germany DA - 14.06.2016 KW - Deflagration KW - geschlossene Behälterprüfung PY - 2016 SN - 978-3-9817853-5-7 SN - 0938-5533 SP - 118 EP - 125 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-37877 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Mishra, Kirti Bhushan A1 - Steinbach, J. T1 - Thermische Zersetzung von AIBN - Experimente und Simulationen zur Bestimmung der SADT N2 - Die thermische Zersetzung von AIBN wurde in einem Projekt mit mehreren Teilnehmern untersucht. Hierbei wurde die selbstbeschleunigende Zersetzungstemperatur SADT) sowohl experimentell als auf Grundlage von Simulationsrechnungen bestimmt. Die Besonderheit bei dem Feststoff AIBN ist, dass die Zersetzung sowohl in der festen, als auch in der flüssigen Phase nach dem Schmelzen stattfindet, was bei den durchgeführten Simulationsrechnungen berücksichtigt werden musste. Die berechneten SADT Werte stimmen mit den experimentell bestimmten sehr gut überein. T2 - 14. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Berlin, Germany DA - 14.06.2016 KW - SADT KW - Reaktionskinetik KW - AIBN KW - DSC KW - UN-Test H.1 KW - UN-Test H.4 PY - 2016 SN - 978-3-9817853-5-7 SN - 0938-5533 SP - 54 EP - 59 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-37878 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Blankenhagel, Paul A1 - Wehrstedt, Klaus-Dieter A1 - Mishra, Kirti Bhushan A1 - Steinbach, J. T1 - Feuerbälle organischer Peroxide: Thermische Strahlung und Sicherheitsabstände N2 - Das Abbrandverhalten und die thermische Strahlung von Poolfeuern organischer Peroxide (OP) wurden bereits in der Vergangenheit ausführlich untersucht. Dabei ergaben sich zum Teil erhebliche Unterschiede hinsichtlich der Abbrandraten, Temperaturen, Strahlungsintensitäten und Flammenlängen im Vergleich zu flüssigen Kohlenwasserstoffen. Das größere Gefahrenpotenzial von OP führt zu strikteren Sicherheitsbestimmungen für Lagerung und Transport. Da das Gefahrenpotenzial maßgeblich von den tatsächlich auftretenden Szenarien abhängt, ist eine Bewertung solcher Ereignisse unumgänglich um nachhaltig die Gesundheit von Mensch und Umgebung zu sichern. Ein Metallfass, gefüllt mit 200 Litern DTBP (Di-tertiär-butylperoxid), wurde auf dem Testgelände Technische Sicherheit der BAM einem Außenfeuer ausgesetzt. Durch den starken Wärmeeintrag erhöht sich die Massenabbrandrate des Peroxids um ein Vielfaches und das Fass entleert sich schließlich unter Ausbildung mehrerer Feuerbälle. Die Flammengröße, Flammentemperatur und damit die thermische Strahlung überschreiten die der gewöhnlichen OP-Poolfeuer. Die resultierenden höheren Sicherheitsabstände sind abschließend berechnet. T2 - 14. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Berlin, Germany DA - 14.06.2016 KW - DTBP KW - Feuerbälle KW - Organische Peroxide KW - Thermische Strahlung PY - 2016 SN - 978-3-9817853-5-7 SN - 0938-5533 SP - 126 EP - 133 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-37881 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Die Explosionskatastrophe von Tianjin 2015 N2 - Am 12. August 2015 kam es in einem Containerlager im Hafen von Tianjin (China) zu einer Serie von Explosionen wobei 173 Menschen getötet und 797 verletzt wurden (Feuerwehrleute und andere Personen). Die ersten beiden Explosionen ereigneten sich innerhalb von 30 Sekunden. Die zweite Explosion war wesentlich heftiger und beruhte u. a. auf der detonativen Umsetzung von ca. 800 Tonnen Ammoniumnitrat. Nach einem Untersuchungsbericht der chinesischen Behörden (Februar 2016) war die Ursache eine Überhitzung eines Containers mit Nitrocellulose-Produkten. Zusammen mit Kollegen von der Nanjing University of Science and Technology arbeiteten Kollegen der Abteilung 2 an der Analyse der Gründe für die Explosionen und deren Verlauf basierend auf den Kenntnissen und Erfahrungen bezüglich der Eigenschaften der involvierten Stoffe, insbesondere Ammoniumnitrat und Nitrocellulose, sowie der potentiellen Mechanismen für die Auslösung und Weiterleitung. Beschrieben werden die in Deutschland gültigen Vorschriften für den Umgang, insbesondere die Lagerung, von Ammoniumnitrat und Nitrocellulose-Produkten. T2 - Fachsymposium 2016 der Kommission für Anlagensicherheit "Anlagensicherheit und Umgang mit gefährlichen Stoffen in einem komplexen Umfeld - Theorie und Praxis am Beispiel des Hamburger Hafens" CY - Hamburg, Germany DA - 13.09.2016 KW - Ammoniumnitrat KW - Nitrocellulose KW - Tianjin PY - 2016 AN - OPUS4-37882 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Siddapureddy, S. A1 - Wehrstedt, Klaus-Dieter A1 - Prabhu, S. V. T1 - Heat transfer to bodies engulfed in di-tert-butyl peroxide pool fires - Numerical simulations N2 - The thermal response of bodies engulfed in di-tert-butyl peroxide (DTBP) pool fires is studied numerically. High heat release rates, high velocities and high emissive powers portray the combustion of DTBP. This makes exceptionally hazard for bodies engulfed in DTBP fire accidents. The concept of adiabatic surface temperature (AST) is applied for DTBP pool fires to circumvent the difficulty of defining the fire exposure boundary condition at the solid surface. Adiabatic surface temperatures (AST) are computed for pool diameters 1.13 m and 3.4 m using the fire dynamics simulator. The thermal response of cask in a 1.13 m DTBP pool fire is studied to verify the concept of AST. It is found that a cask encounters twofold the heat fluxes in DTBP fires than in diesel pool fires. More than 30% of the net heat flux to the cask is a direct result of the convective heat exchange between the fire and the cask. This implies that the regular safety guidelines formulated for hydrocarbon pool fires are not adequate for the safety of the bodies engulfed in DTBP pool fires. KW - Di-tert-butyl peroxide (DTBP) pool fire KW - CFD simulation KW - Adiabatic surface temperature (AST) KW - Cask in fire PY - 2016 DO - https://doi.org/10.1016/j.jlp.2016.09.008 SN - 0950-4230 SN - 1873-3352 VL - 44 SP - 204 EP - 211 PB - Elsevier Ltd. AN - OPUS4-37883 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter T1 - Diffusive burning of blended peroxy-fuels: Some experimental results N2 - Dampening of energetic properties and the effects of blending proportions of isododecane on the diffusive burning behaviour of peroxy-fuels are experimentally studied. Blended peorxy-fuels are obtained by adding isododecane in the proportions of 25 wt.%, 50 wt.% and 75 wt.%, respectively, in technical pure peroxy-fuels. The fuels were burned in form of pool fires with diameters 0.02 m ≤ d ≤ 1 m. The mass burning rates and relative flame lengths are found to be weakened with increasing diluent proportions. By measuring the mass burning rates and visible flame lengths of pool fires of different samples of fuel blends an optimum blending criterion is developed. Furthermore, it is shown that the dilution proportions and flame characteristics can be correlated by empirical equations. KW - Peroxy-fuels KW - Blends KW - Isododecan KW - Pool fire KW - Mass burning rate KW - Flame length PY - 2015 DO - https://doi.org/10.1016/j.fuproc.2015.06.014 SN - 0016-2361 SN - 0378-3820 SN - 1873-7153 VL - 140 SP - 324 EP - 330 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-34950 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -