TY - CONF A1 - Blankenhagel, Paul A1 - Wehrstedt, Klaus-Dieter A1 - Mishra, K. B. A1 - Steinbach, J. T1 - Fireballs as a possible hazard scenario of organic peroxides in steel drums N2 - To simulate a full fire engulfment during transportation or storage a closed removable head steel drum filled with 200 l Di-tert-butyl peroxide (DTBP) is subjected to a wood fire. Due to the enormous heat flux and the exothermic self-decomposition large flames arise and finally multiple fireballs occur. The fireballs consume up to 20 % of the total mass (20 % equals to 31 kg). They are characterized by high surface emissive power and large flames associated with high thermal radiation causing spontaneous ignition of objects in the surrounding. The measured sizes of the DTBP fireballs are smaller compared to the results of the general equations for hydrocarbon fireballs. Because these equations are recommended by the Health and Safety Executive (UK) to be applicable for organic peroxides explicit comparisons of DTBP with LPG, diesel and gasoline concerning the characteristics of fireballs are carried out. Also the burning time is compared and confirms a faster combustion of the peroxide. Moreover, the development of size and emissive power for DTBP and diesel fireballs are compared in a normalized graph. The results provide the assumption that new empirical models are required to be developed for hazard assessment of organic peroxide fireballs. T2 - 5. Brand- und Explosionsschutztage 2017 CY - Magdeburg, Germany DA - 23.03.2017 KW - Organic peroxide KW - DTBP KW - Fireball KW - Steel drum KW - Simulation PY - 2017 SN - 978-3-00-056201-3 DO - https://doi.org/10.978.300/0562013 VL - 2017 SP - 1 EP - 9 PB - Otto-von-Guericke-Universität CY - Magdeburg AN - OPUS4-39994 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Die Explosionskatastrophe von Tianjin 2015 - eine Analyse N2 - Am 12. August 2015 kam es in einem Containerlager im Hafen von Tianjin (China) zu einer Serie von Explosionen wobei 173 Menschen getötet und 797 verletzt wurden (Feuerwehrleute und andere Personen). Die ersten beiden Explosionen ereigneten sich innerhalb von 30 Sekunden. Die zweite Explosion war wesentlich heftiger und beruhte u. a. auf der detonativen Umsetzung von ca. 800 Tonnen Ammoniumnitrat. Nach einem Untersuchungsbericht der chinesischen Behörden (Februar 2016) war die Ursache eine Überhitzung eines Containers mit Nitrocellulose-Produkten. Zusammen mit Kollegen von der Nanjing University of Science and Technology arbeiteten Kollegen der Abteilung 2 an der Analyse der Gründe für die Explosionen und deren Verlauf basierend auf den Kenntnissen und Erfahrungen bezüglich der Eigenschaften der involvierten Stoffe, insbesondere Ammoniumnitrat und Nitrocellulose, sowie der potentiellen Mechanismen für die Auslösung und Weiterleitung. Beschrieben werden die in Umgang, insbesondere die Lagerung, von Ammoniumnitrat und Nitrocellulose-Produkten. T2 - Besuch einer chinesischen Delegation zu Arbeitssicherheit in Kooperation mit der Europa Akademie e.V. CY - Berlin, Germany DA - 14.11.2016 KW - Ammoniumnitrat KW - Cellulosenitrat Nitrozellulose KW - Lagerung KW - Explosion KW - Detonation KW - Schutzabstände KW - Gefahrgüter KW - Gefahrstoffe PY - 2016 AN - OPUS4-39100 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Einstufung, Kennzeichnung und Verpackung von Stoffen und Gemischen N2 - BAM Abteilung „Chemische Sicherheitstechnik“, das Global harmonisierte System zur Einstufung und Kennzeichnung von Chemikalien (UN GHS: United Nations Globally Harmonized System of Classification, Labelling and Packaging of Chemicals), die Verordnung über die Einstufung, Kennzeichnung und Verpackung von Stoffen und Gemischen (CLP steht für die Abkürzung der englischen Begriffe classification, labelling and packaging), die Verordnung zur Registrierung, Bewertung, Zulassung und Beschränkung chemischer Stoffe. (REACH: Registration, Evaluation, Authorization and Restriction of Chemicals). T2 - Besuch einer chinesischen Delegation zu Arbeitssicherheit in Kooperation mit der Europa Akademie e.V. CY - Berlin, Germany DA - 14.11.2016 KW - Einstufung und Kennzeichnung von Chemikalien KW - UN GHS KW - CLP-Verordnung KW - REACH KW - Physikalische Verfahren PY - 2016 AN - OPUS4-39101 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Die Explosionskatastrophe von Tianjin 2015 N2 - Am 12. August 2015 kam es in einem Containerlager im Hafen von Tianjin (China) zu einer Serie von Explosionen wobei 173 Menschen getötet und 797 verletzt wurden (Feuerwehrleute und andere Personen). Die ersten beiden Explosionen ereigneten sich innerhalb von 30 Sekunden. Die zweite Explosion war wesentlich heftiger und beruhte u. a. auf der detonativen Umsetzung von ca. 800 Tonnen Ammoniumnitrat. Nach einem Untersuchungsbericht der chinesischen Behörden (Februar 2016) war die Ursache eine Überhitzung eines Containers mit Nitrocellulose-Produkten. Zusammen mit Kollegen von der Nanjing University of Science and Technology arbeiteten Kollegen der Abteilung 2 an der Analyse der Gründe für die Explosionen und deren Verlauf basierend auf den Kenntnissen und Erfahrungen bezüglich der Eigenschaften der involvierten Stoffe, insbesondere Ammoniumnitrat und Nitrocellulose, sowie der potentiellen Mechanismen für die Auslösung und Weiterleitung. Beschrieben werden die in Umgang, insbesondere die Lagerung, von Ammoniumnitrat und Nitrocellulose-Produkten. T2 - 16. Euroforum-Jahrestagung "Chemie- und Industrieparks" CY - Frankfurt/Main, Germany DA - 08.11.2016 KW - Ammoniumnitrat KW - Cellulosenitrat Nitrozellulose KW - Lagerung KW - Explosion KW - Detonation KW - Schutzabstände KW - Gefahrgüter KW - Gefahrstoffe KW - Vorschriften in Deutschland PY - 2016 AN - OPUS4-39102 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Die Explosionskatastrophe von Tianjin 2015 – Analyse und Bewertung N2 - Am 12. August 2015 kam es in einem Containerlager im Hafen von Tianjin (China) zu einer Serie von Explosionen wobei 173 Menschen getötet und 797 verletzt wurden (Feuerwehrleute und andere Personen). Die ersten beiden Explosionen ereigneten sich innerhalb von 30 Sekunden. Die zweite Explosion war wesentlich heftiger und beruhte u. a. auf der detonativen Umsetzung von ca. 800 Tonnen Ammoniumnitrat. Nach einem Untersuchungsbericht der chinesischen Behörden (Februar 2016) war die Ursache eine Überhitzung eines Containers mit Nitrocellulose-Produkten. Zusammen mit Kollegen von der Nanjing University of Science and Technology arbeiteten Kollegen der Abteilung 2 an der Analyse der Gründe für die Explosionen und deren Verlauf basierend auf den Kenntnissen und Erfahrungen bezüglich der Eigenschaften der involvierten Stoffe, insbesondere Ammoniumnitrat und Nitrocellulose, sowie der potentiellen Mechanismen für die Auslösung und Weiterleitung. Beschrieben werden die in Umgang, insbesondere die Lagerung, von Ammoniumnitrat und Nitrocellulose-Produkten. T2 - Besuch einer chinesischen Delegation CY - Bonn, Germany DA - 16.11.2016 KW - Ammoniumnitrat KW - Cellulosenitrat Nitrozellulose KW - Lagerung KW - Explosion KW - Detonation KW - Schutzabstände KW - Gefahrgüter KW - Gefahrstoffe PY - 2016 AN - OPUS4-39103 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Self-Accelerating Decomposition Temperature (SADT) von Azobisisobutyronitril (AIBN) N2 - Im Vortrag wird über Untersuchungen zur thermischen Stabilität (Bestimmung der SADT = Self-Accelerating Decomposition Temperature) von 2,2‘-Azobisisobutyronitril (AIBN) in realen Packstücken unterschiedlicher Größe sowie in Dewar-Gefäßen berichtet. Die Packstücke mit 5 kg, 20 kg bzw. 50 kg AIBN wurden nach der UN-Methode H.4 untersucht, die Versuche mit den Dewar-Gefäßen nach UN-Methode H.4. Zusätzlich wurden experimentelle Daten mittels DSC (Differential Scanning Calorimetry) unter Verwendung druckfester Gefäße bestimmt. Die experimentellen Daten wurden für weitergehende Untersuchungen/Simulationen unter Verwendung realer kinetischer Modelle bereitgestellt. Letztendlich konnte nachgewiesen werden, dass mittels Simulation die SADT von AIBN in Abhängigkeit von der Packstückgröße sehr genau, d. h. in guter Übereinstimmung mit den Packstückversuchen, bestimmt werden kann. T2 - ProcessNet-Arbeitsausschusses Reaktionstechnik sicherheitstechnisch schwieriger Prozesse CY - Darmstadt, Germany DA - 03.05.2016 KW - thermische Stabilität KW - SADT KW - 2,2‘-Azobisisobutyronitril (AIBN) KW - UN-Methode H.4 PY - 2016 AN - OPUS4-37190 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - CFD based reproduction of Amuay refinery accident 2012 N2 - Amuay accident 2012 is one of similar accidents happened in Buncefield (2005), Jaipur and Puerto Rico (2009), respectively. Since experimental reproduction of such accidents is not always possible numerical simulations help a lot to understand the scenarios on qualitative basis. In this work the accident is reproduced with a CFD model which takes into account the heaviness of the gas (LPG), wind and gravity driven spread. The leak was reported to be located near a number of spherical tanks. The ignition source was presumably the running vehicles on a nearby street. A part of the refinery containing the locations of leakage and ignition was considered as computational domain. The road is located at the eastern boarder. The area contains different tanks, whose height was estimated due to a lack of available data. The diameter was extrapolated from the available image data. Further, a grid of walls is located between a number of tanks. The total domain has a size of 750 m x 400 m x 50 m. An unstructured mesh was created using tetrahedral elements with prism layers at the ground to improve mesh quality in the boundary layer. The mesh has a total number of 775 686 cells. T2 - 15th Internation Symposium in Loss Prevention and Safety Promotion in the Process Industries CY - Freiburg, Germany DA - 05.06.2016 KW - CFD PY - 2016 AN - OPUS4-37195 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Salg, Steffen A1 - Wehrstedt, Klaus-Dieter A1 - Michael-Schulz, Heike A1 - Malow, Marcus A1 - Schomäcker, R. T1 - Die Deflagration von Azodicarbonamid unter verschiedenen Umgebungsbedingungen N2 - Azodicarbonamid (ADCA) ist ein bekanntermaßen deflagrationsfähiger Stoff, der in der Kunststoffindustrie als Treib- und Blähmittel eingesetzt wird. In diesem Beitrag wird die Deflagration von ADCA unter verschiedenen Bedingungen betrachtet. Es werden Ergebnisse von Experimenten in offenen und geschlossenen Systemen präsentiert. In geschlossenen Systemen wurde die Zusammensetzung der umgebenden Atmosphäre von Luft mit Umgebungsdruck über Luft mit Unter- und Überdruck hin zu Stickstoff mit Umgebungsdruck variiert. Um das Deflagrationsrisiko zu reduzieren wird eine Verarbeitung von ADCA im Vakuum vorgeschlagen. T2 - 14. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Berlin, Germany DA - 14.06.2016 KW - Deflagration KW - geschlossene Behälterprüfung PY - 2016 SN - 978-3-9817853-5-7 SN - 0938-5533 SP - 118 EP - 125 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-37877 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Mishra, Kirti Bhushan A1 - Steinbach, J. T1 - Thermische Zersetzung von AIBN - Experimente und Simulationen zur Bestimmung der SADT N2 - Die thermische Zersetzung von AIBN wurde in einem Projekt mit mehreren Teilnehmern untersucht. Hierbei wurde die selbstbeschleunigende Zersetzungstemperatur SADT) sowohl experimentell als auf Grundlage von Simulationsrechnungen bestimmt. Die Besonderheit bei dem Feststoff AIBN ist, dass die Zersetzung sowohl in der festen, als auch in der flüssigen Phase nach dem Schmelzen stattfindet, was bei den durchgeführten Simulationsrechnungen berücksichtigt werden musste. Die berechneten SADT Werte stimmen mit den experimentell bestimmten sehr gut überein. T2 - 14. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Berlin, Germany DA - 14.06.2016 KW - SADT KW - Reaktionskinetik KW - AIBN KW - DSC KW - UN-Test H.1 KW - UN-Test H.4 PY - 2016 SN - 978-3-9817853-5-7 SN - 0938-5533 SP - 54 EP - 59 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-37878 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Blankenhagel, Paul A1 - Wehrstedt, Klaus-Dieter A1 - Mishra, Kirti Bhushan A1 - Steinbach, J. T1 - Feuerbälle organischer Peroxide: Thermische Strahlung und Sicherheitsabstände N2 - Das Abbrandverhalten und die thermische Strahlung von Poolfeuern organischer Peroxide (OP) wurden bereits in der Vergangenheit ausführlich untersucht. Dabei ergaben sich zum Teil erhebliche Unterschiede hinsichtlich der Abbrandraten, Temperaturen, Strahlungsintensitäten und Flammenlängen im Vergleich zu flüssigen Kohlenwasserstoffen. Das größere Gefahrenpotenzial von OP führt zu strikteren Sicherheitsbestimmungen für Lagerung und Transport. Da das Gefahrenpotenzial maßgeblich von den tatsächlich auftretenden Szenarien abhängt, ist eine Bewertung solcher Ereignisse unumgänglich um nachhaltig die Gesundheit von Mensch und Umgebung zu sichern. Ein Metallfass, gefüllt mit 200 Litern DTBP (Di-tertiär-butylperoxid), wurde auf dem Testgelände Technische Sicherheit der BAM einem Außenfeuer ausgesetzt. Durch den starken Wärmeeintrag erhöht sich die Massenabbrandrate des Peroxids um ein Vielfaches und das Fass entleert sich schließlich unter Ausbildung mehrerer Feuerbälle. Die Flammengröße, Flammentemperatur und damit die thermische Strahlung überschreiten die der gewöhnlichen OP-Poolfeuer. Die resultierenden höheren Sicherheitsabstände sind abschließend berechnet. T2 - 14. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Berlin, Germany DA - 14.06.2016 KW - DTBP KW - Feuerbälle KW - Organische Peroxide KW - Thermische Strahlung PY - 2016 SN - 978-3-9817853-5-7 SN - 0938-5533 SP - 126 EP - 133 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-37881 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Die Explosionskatastrophe von Tianjin 2015 N2 - Am 12. August 2015 kam es in einem Containerlager im Hafen von Tianjin (China) zu einer Serie von Explosionen wobei 173 Menschen getötet und 797 verletzt wurden (Feuerwehrleute und andere Personen). Die ersten beiden Explosionen ereigneten sich innerhalb von 30 Sekunden. Die zweite Explosion war wesentlich heftiger und beruhte u. a. auf der detonativen Umsetzung von ca. 800 Tonnen Ammoniumnitrat. Nach einem Untersuchungsbericht der chinesischen Behörden (Februar 2016) war die Ursache eine Überhitzung eines Containers mit Nitrocellulose-Produkten. Zusammen mit Kollegen von der Nanjing University of Science and Technology arbeiteten Kollegen der Abteilung 2 an der Analyse der Gründe für die Explosionen und deren Verlauf basierend auf den Kenntnissen und Erfahrungen bezüglich der Eigenschaften der involvierten Stoffe, insbesondere Ammoniumnitrat und Nitrocellulose, sowie der potentiellen Mechanismen für die Auslösung und Weiterleitung. Beschrieben werden die in Deutschland gültigen Vorschriften für den Umgang, insbesondere die Lagerung, von Ammoniumnitrat und Nitrocellulose-Produkten. T2 - Fachsymposium 2016 der Kommission für Anlagensicherheit "Anlagensicherheit und Umgang mit gefährlichen Stoffen in einem komplexen Umfeld - Theorie und Praxis am Beispiel des Hamburger Hafens" CY - Hamburg, Germany DA - 13.09.2016 KW - Ammoniumnitrat KW - Nitrocellulose KW - Tianjin PY - 2016 AN - OPUS4-37882 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Siddapureddy, S. A1 - Wehrstedt, Klaus-Dieter A1 - Prabhu, S. V. T1 - Heat transfer to bodies engulfed in di-tert-butyl peroxide pool fires - Numerical simulations N2 - The thermal response of bodies engulfed in di-tert-butyl peroxide (DTBP) pool fires is studied numerically. High heat release rates, high velocities and high emissive powers portray the combustion of DTBP. This makes exceptionally hazard for bodies engulfed in DTBP fire accidents. The concept of adiabatic surface temperature (AST) is applied for DTBP pool fires to circumvent the difficulty of defining the fire exposure boundary condition at the solid surface. Adiabatic surface temperatures (AST) are computed for pool diameters 1.13 m and 3.4 m using the fire dynamics simulator. The thermal response of cask in a 1.13 m DTBP pool fire is studied to verify the concept of AST. It is found that a cask encounters twofold the heat fluxes in DTBP fires than in diesel pool fires. More than 30% of the net heat flux to the cask is a direct result of the convective heat exchange between the fire and the cask. This implies that the regular safety guidelines formulated for hydrocarbon pool fires are not adequate for the safety of the bodies engulfed in DTBP pool fires. KW - Di-tert-butyl peroxide (DTBP) pool fire KW - CFD simulation KW - Adiabatic surface temperature (AST) KW - Cask in fire PY - 2016 DO - https://doi.org/10.1016/j.jlp.2016.09.008 SN - 0950-4230 SN - 1873-3352 VL - 44 SP - 204 EP - 211 PB - Elsevier Ltd. AN - OPUS4-37883 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter T1 - Diffusive burning of blended peroxy-fuels: Some experimental results N2 - Dampening of energetic properties and the effects of blending proportions of isododecane on the diffusive burning behaviour of peroxy-fuels are experimentally studied. Blended peorxy-fuels are obtained by adding isododecane in the proportions of 25 wt.%, 50 wt.% and 75 wt.%, respectively, in technical pure peroxy-fuels. The fuels were burned in form of pool fires with diameters 0.02 m ≤ d ≤ 1 m. The mass burning rates and relative flame lengths are found to be weakened with increasing diluent proportions. By measuring the mass burning rates and visible flame lengths of pool fires of different samples of fuel blends an optimum blending criterion is developed. Furthermore, it is shown that the dilution proportions and flame characteristics can be correlated by empirical equations. KW - Peroxy-fuels KW - Blends KW - Isododecan KW - Pool fire KW - Mass burning rate KW - Flame length PY - 2015 DO - https://doi.org/10.1016/j.fuproc.2015.06.014 SN - 0016-2361 SN - 0378-3820 SN - 1873-7153 VL - 140 SP - 324 EP - 330 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-34950 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter T1 - Underground gas pipeline explosion and fire: CFD based assessment of foreseeability N2 - Scenarios of underground gas pipeline failure, crater formation, dispersion of gas, explosion and subsequent fires are investigated with semi-empirical and with CFD (Computational Fluid Dynamics) modelling. In order to strengthen the accident based learning approaches present investigations are performed in the context of recent GAIL (Gas Authority of India Limited) natural gas pipeline incident occurred in India. The foreseeability of damages to lives of people and assets due to explosion overpressure and thermal radiation are assessed. The released gas is considered as slightly dense-than-air i.e. 1.5 times. Depending on the LFL (Lower Flammability Limit) of gas the dispersion diameter and heights are predicted which followed the visual evidences appropriately. The model was furthermore tested with an even denser medium and was found to be worked well there too. The estimated explosion overpressures with the standard methods and also with CFD reproduced the scenario nicely. The effects of congestion VBR (Volume Blockage Ratio) in form of vegetation on stable atmospheric boundary layer flow is analysed and its contribution towards turbulence and hazard enhancement is studied. It is found that the major source of fatalities was higher thermal radiation emitted by pool fires of methane. The estimated thermal safety distances clearly demonstrate the ignorance/under estimation of likelihood and consequence of such hazardous events. For such incidents CFD demonstrated a strong capability to assess the pre or/and post events foreseeabilities within a reasonable amount of time and with an acceptable level of accuracy meeting the industrial needs for risk analysis. KW - Natural gas KW - Underground pipeline KW - Dense gas dispersion KW - Explosion and fire KW - CFD KW - Safety distance PY - 2015 DO - https://doi.org/10.1016/j.jngse.2015.04.010 SN - 1875-5100 VL - 24 SP - 526 EP - 542 PB - Elsevier CY - Amsterdam [u.a.] AN - OPUS4-33671 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Manolov, Manol T1 - Thermal decomposition of AIBN Part A: Decomposition in real scale packages and SADT determination N2 - In this paper the thermal decomposition of 2,2′-azobisisobutyronitrile (AIBN) was investigated in real scale packages of different sizes and in 500 mL Dewar vessels. Packages containing 5 kg, 20 kg and 50 kg of AIBN have been investigated according to the UN test H.1 method and the 500 mL Dewar experiments were performed according to the UN test H.4 method. The self-accelerating decomposition temperature (SADT) was determined for the different masses and for the 500 mL Dewar vessel. Additionally, DSC curves have been recorded in closed crucibles. All these experimental data are the basis of a series of forthcoming papers dealing with the simulation of the SADT for different masses using reliable kinetic data. PY - 2015 DO - https://doi.org/10.1016/j.tca.2015.06.013 SN - 0040-6031 SN - 1872-762X VL - 621 SP - 1 EP - 5 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-35010 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Boiling Liquid Expanding Vapor Explosion (BLEVE) of peroxy-fuels: Experiments and Computational Fluid Dynamics (CFD) simulation T2 - IGUS Energetic and Oxidising Substances (EOS) Working Group Meeting CY - Ottawa, Canada DA - 2015-05-06 PY - 2015 AN - OPUS4-33377 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - MNB, DNT and MNT - Relevant safety aspects T2 - Mononitrobenzene and Dinitrotoluene Safety Conference CY - Lyon, France DA - 2015-04-14 PY - 2015 AN - OPUS4-33383 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Blankenhagel, Paul A1 - Mishra, K. B. A1 - Wehrstedt, Klaus-Dieter A1 - Steinbach, J. T1 - Thermal radiation impact of DTBP fireballs N2 - The burning behaviour and thermal radiation of pool fires of organic peroxides (OP) have been studied by several authors in the past. It was shown that mass burning rates, flame temperatures and thus the Surface Emissive Power (SEP) of OP exceed to that of hydrocarbons considerably. These facts lead to further investigations of even dangerous worst case scenarios i.e. related to storage and transportation. A metal drum containing 200 l of DTBP (Di-tert-butyl peroxide) is investigated under a surrounding wood fire. Due to a higher heat flux to the substance, the mass burning rate reaches multiples of an equivalent pool fire and results in several fireballs. The analyses of thermographic camera images and radiometer measurements show higher flame lengths, higher temperatures and thereforeincreased thermal radiation compared to OP pool fires. The resulting greater safety distances for a DTBP fireball event are discussed. T2 - New Trends in Research of Energetic Materials (NTREM) CY - Pardubice, Czech Republic DA - 20.04.2016 KW - organic peroxide KW - pool fire KW - fireball KW - thermal radiation KW - safety distance PY - 2016 SN - 978-80-7395-976-0 SP - 410 EP - 418 PB - Elsevier AN - OPUS4-35858 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - 2015 Tianjin Explosions N2 - In 2015 a series of explosions occurred at a container storage station at the Port of Tianjin, China, on Wednesday, 12 August 2015, that killed over one hundred people and injured hundreds of firemen and others. The first two explosions happened within 30 seconds of each other at the facility. The second explosion was larger and involved the detonation of about 800 tons of ammonium nitrate. The cause of the explosions was not known at first, but an investigation of the Chinese authorities concluded in February 2016 that an overheated container of dry nitrocellulose was the cause of the initial explosion. Colleagues of the Nanjing University of Science and Technology and BAM worked together to analyze the reasons and the process of that incident based on knowledge about the properties of the involved substances, particularly ammonium nitrate and nitrocellulose, and potential mechanism of initiation and propagation. T2 - IGUS EOS Meeting CY - Basel, Switzerland DA - 11.04.2016 KW - Tianjin KW - Nitrocellulose KW - Ammonium nitrate PY - 2016 AN - OPUS4-35861 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter A1 - Schönbucher, A. ED - K.N. Seetharamu, ED - T.R. Seetharam, ED - Pradeep G. Hedge, ED - H.M. Mallikarjuna, T1 - On the dynamics of organic peroxide pool flames T2 - 35th National Conference on Fluid Mechanics and Fluid Power CY - Bangalore, India DA - 2008-12-11 KW - Peroxide and kerosene pool flames KW - Froude number KW - CFD (Computational Fluid Dynamics) PY - 2008 IS - FMFP 08 - 076 SP - 643 EP - 650 CY - Bangalore, India AN - OPUS4-18690 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Losse, G. A1 - Mahlberg, W. A1 - Wehrstedt, Klaus-Dieter T1 - Synthesis of lysergyl-enkephalin derivatives PY - 1979 SN - 0009-4374 SN - 0223-5234 VL - 14 IS - 4 SP - 325 EP - 328 PB - EDIFOR CY - Paris AN - OPUS4-19633 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Losse, G. A1 - Wehrstedt, Klaus-Dieter T1 - Synthese von N-(D-Lyseryl-L-valyl)-L-phenylalanyl-D-prolin-lactam, eines neuen Alkaloids aus Claviceps purpurea PY - 1981 SN - 0044-2402 VL - 21 IS - 4 SP - 148 EP - 149 PB - Dt. Verl. für Grundstoffindustrie CY - Leipzig AN - OPUS4-19634 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Losse, G. A1 - Wehrstedt, Klaus-Dieter T1 - Ein neuer synthetischer Zugang zu Ergot-Peptidalkaloiden des N - (d-Lysergyl-aminoacy1)-lactam Types PY - 1981 DO - https://doi.org/10.1002/prac.19813230604 SN - 0021-8383 VL - 323 IS - 6 SP - 869 EP - 876 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-19630 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -