TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - EOS Working Group Chairman's Progress Report of the Last Triennium T2 - IGUS Plenary Meeting CY - Berlin, Germany DA - 2012-05-09 PY - 2012 AN - OPUS4-25853 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter T1 - CFD simulation to predict the performance of a peroxy-fuel burner N2 - new burner concept for peroxy-fuels is proposed. The performance of the proposed peroxy-fuel burner is predicted with the help of Computational Fluid Dynamics (CFD) simulation. It is found that peroxy-fuel burner not only requires considerable less amount of fuel for the same output/power but also at the same time the overall size of the processing unit can be reduced. As peroxy-fuels contain oxygen atoms within the molecule itself a similar to oxy-fuel combustion environment is created without even supplying pure oxygen. CFD simulations also support the above facts and demonstrate the existence of less favorable conditions to form NOx. T2 - 38th National conference on fluid mechanics and fluid power CY - Bhopal, India DA - 15.12.2011 KW - Burner KW - Peroxy-fuels KW - Performance KW - CFD simulation PY - 2011 IS - Paper HT-07 SP - 1 EP - 6 AN - OPUS4-25380 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Gefährlich exotherm zersetzliche Stoffe und deren Identifizierung T2 - DECHEMA-Weiterbildungskurs "Sicherheit chemischer Reaktionen" CY - Berlin, Germany DA - 2012-03-26 PY - 2012 AN - OPUS4-25694 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Böhme, Thilo A1 - Bulin, Michael A1 - Scheid, Marc A1 - Schmidt, Martin A1 - Seifert, Alexander A1 - Wehrstedt, Klaus-Dieter T1 - Festlegung relevanter sicherheitstechnischer Kenngrößen von Stäuben für den Explosionsschutz und Erarbeitung der zugehörigen Bandbreiten auf der Grundlage vorhandener Daten zur Aufnahme in den GSBL N2 - Ziel des F&E-Vorhabens des GSBL (BAM Vh 2520) war die Erarbeitung von Datensätzen auf der Grundlage bereits bestehender Staubdaten (für Datenbasis siehe Abschnitt 4) und die Übergabe der erarbeiteten Datensätze in elektronischer Form an den GSBL bis spätestens 31.05.2011. Der entsprechende Forschungs- und Entwicklungsvertrag trat am 01.08.2009 in Kraft. Für die Erarbeitung der Datensätze mussten neuartige Konzepte entwickelt werden (siehe Abschnitt 3.5; Abschnitt 3.3 gibt eine Einführung in das Staub-Fachgebiet und behandelt die Besonderheit von Stäuben). Aufgrund von Schwierigkeiten bei der Auswertung und bei der Zusammenstellung der Daten, die erst im Verlaufe des Projekts erkannt wurden, hat es beträchtliche Verzögerungen bei der Erstellung der Datensätze gegeben. Dies führte zu der Feststellung, dass eine Laufzeitverlängerung des Projekts notwendig war. Im Mai 2011 wurde daher ein entsprechender Antrag beim Auftraggeber gestellt. Der Antrag auf kostenneutrale Laufzeitverlängerung führte schließlich zu einer Änderung des ursprünglichen Forschungs- und Entwicklungsvertrags. Der Änderungsvertrag sah eine Verlängerung des Projekts bis zum 30.04.2012 vor. Um die Datensätze im GSBL abbilden zu können, war es auch erforderlich, eine adäquate Datenstruktur zu entwerfen und diese im GSBL zu implementieren. Die Bekanntgabe der zur Abbildung der Datensätze notwendigen Struktur erfolgte am 11.01.2011 per E-Mail (EXCELDatei gsbldbdir3_23_0029)2. Veränderungen bzw. Präzisierungen dieser Datenstruktur wurden dem GSBL am 19.01.2011 und am 28.01.2011 mitgeteilt, ebenfalls per E-Mail3. Am 19.10.2011 erfolgte eine weitere Änderung, die die sogenannte Nachschlagetabelle betrifft: Der Textinhalt der Tabelle T_STAUBM lautet nun "Auswertung vorhandener Datenkollektive durch Experten-Team." (ursprünglicher Wortlaut: "Auswertung vorhandener Datenkollektive durch Experten"). Die Änderung geht auf einen Wunsch des GSBL-Begleitkreises zurück, der am 07.10.2011 auf der in der BAM stattgefundenen Besprechung vorgebracht wurde. KW - Sicherheitstechnische Kenngrößen von Stäuben KW - Bandbreiten KW - Explosionsschutz KW - GSBL KW - Datenbank PY - 2012 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-260765 SN - 978-3-9815134-0-0 IS - Abschlussbericht SP - 1 EP - 129 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-26076 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - King, M.J. A1 - Iacobucci, P.A. A1 - Mak, W.A. A1 - Wehrstedt, Klaus-Dieter T1 - Report about the IGUS EOS meeting 2011 in Washington, D.C. N2 - IGUS is the International Group of Experts on the Explosion Risks of Unstable Substances. IGUS was established in 1962 with the objective to harmonize test methods used by different countries to identify and quantify the explosive properties of unstable materials. Over the years, IGUS has continued to offer scientists, who are advisers to their governments, and others, a forum to exchange data and information. The Energetic and Oxidizing Substances (EOS) working group as a sub-group of IGUS is dealing with test methods, Classification and safety aspects relating to organic peroxides, self-reactive substances and other energetic substances, fertilizers, ammonium nitrate and oxidizers. The EOS working group holds an annual meeting alternating between Europe, the United States and Japan. The 2011 meeting took place from the 27th to the 29th of April 2011 at the Madison Hotel in Washington, D. C. The meeting was hosted by the Organic Peroxide Producers Safety Division (OPPSD) of the Society of Plastics Industry, Inc. (SPI). This was the fourth EOS meeting held in the USA since 1994. Of particular importance is the fact that 39 colleagues from authorities, universities, research institutes and industries attended the meeting. The delegates came from USA, Canada, China, France, The Netherlands, Norway, Sweden, Italy, Japan, United Kingdom and Germany. This confirms the breadth and scope of this forum and the value the participants associate with being able to contact other colleagues from around the world enabling the effective exchange of scientific results and discussion on the wide-ranging Problems concerning energetic and oxidizing materials. T2 - IGUS EOS Meeting 2011 CY - Washington D.C., USA DA - 27.04.2011 KW - IGUS KW - EOS KW - Organic peroxides KW - Self-reactive substances KW - Test methods KW - Oxidizers KW - Round robin test PY - 2011 SP - 1 EP - 4 AN - OPUS4-26364 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Scheid, Marc A1 - Seifert, Alexander A1 - Böhme, Thilo A1 - Wehrstedt, Klaus-Dieter A1 - Bulin, Michael T1 - Bandbreiten sicherheitstechnischer Kenngrößen von Stäuben - Erarbeitung von Staubgruppen und zugehöriger Bandbreiten sicherheitstechnischer Kenngrößen auf der Grundlage vorhandener Daten zur Aufnahme in den Gemeinsamen Stoffdatenpool Bund / Länder T2 - VDI-Fachtagung - Sichere Handhabung brennbarer Stäube CY - Nürnberg, Germany DA - 2012-11-06 KW - Sicherheitstechnische Kenngrößen KW - Brennbare Stäube KW - Brandschutz KW - Explosionsschutz PY - 2012 SN - 978-3-18-092182-2 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte VL - 2182 SP - 37 EP - 50 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-26973 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Havarie Containerschiff MSC "Flaminia" T2 - Sitzung ProcessNet- Arbeitsausschuss "Reaktionstechnik sicherheitstechnisch schwieriger Prozesse" CY - Frankfurt am Main, Germany DA - 2012-09-05 PY - 2012 AN - OPUS4-26481 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - IGUS: An Example of Good International Laboratory Co-Operation, Part 2 T2 - Sitzung ProcessNet-Arbeitsausschuss "Reaktionstechnik sicherheitstechnisch schwieriger Prozesse" CY - Frankfurt am Main, Germany DA - 2012-09-05 PY - 2012 AN - OPUS4-26482 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schälike, Stefan A1 - Chun, Hyunjoo A1 - Mishra, Kirti Bhushan A1 - Wehrstedt, Klaus-Dieter A1 - Schönbucher, A. T1 - Mass burning rates of di-tert-butyl peroxide pool fires - experimental study and modeling N2 - Data and predictions for the mass burning rates of di-tert-butyl peroxide (DTBP) pool fires (0.003 m < pool diameter < 3 m) are presented. The mass burning rates of DTBP fires are up to five times higher and are less dependent on pool diameter compared to hydrocarbon pool fires caused by an additional heat release rate due to exothermic decomposition reaction in the liquid phase. This heat release rate is calculated using a first-order reaction kinetic obtained from microcalorimetric measurements. A new model is derived considering the heat release rate due to the decomposition reaction, which is shown to be 40% of the heat release rate radiated to the pool surface. With the presented model, which also includes physical quantities, especially the limiting fuel concentration for upward flame propagation, it is possible to predict the mass burning rates of large DTBP pool fires. The predicted values are in very good agreement with the experiments. KW - Di-tert-butyl peroxide (DTBP) KW - Exothermic decomposition reaction KW - Mass burning rate KW - Pool fire PY - 2013 DO - https://doi.org/10.1080/00102202.2012.726664 SN - 0010-2202 SN - 1563-521X VL - 185 IS - 3 SP - 408 EP - 419 PB - Gordon and Breach CY - New York, NY AN - OPUS4-27902 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Gefährlich exotherm zersetzlicher Stoffe und deren Identifizierung T2 - DECHEMA-Weiterbildungskurs "Sicherheit chemischer Reaktionen" CY - Berlin, Germany DA - 2013-03-18 PY - 2013 AN - OPUS4-27875 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -