TY - GEN A1 - Wilrich, Cordula A1 - Schröder, Volkmar A1 - Brandes, E. A1 - Schmidt, Martin A1 - Wandrey, Peter-Andreas A1 - Mix, K.-H. A1 - Wehrstedt, Klaus-Dieter A1 - Bender, H. A1 - Stephan, U. A1 - Eberz, A. A1 - Steinbach, J. A1 - Stoessel, F. T1 - Plant and process safety - 2. Hazardous materials and process conditions N2 - "Ullmann's Encyclopedia of Industrial Chemistry" is the benchmark reference in chemistry and chemical and life science engineering, covering inorganic and organic chemicals, advanced materials, pharmaceuticals, polymers and plastics, metals and alloys, biotechnology and biotechnological products, food chemistry, process engineering and unit operations, analytical methods, environmental protection, and much more. The present article is part of the topic collection "Environmental Protection and Industrial Safety". It covers plant and process safety, focusing on hazardous materials and process conditions. KW - Flammable gases and vapors KW - Combustibility of liquids KW - Dust explosions KW - Explosive condensed substances KW - Harmful effects of substances KW - Exothermic and pressure-inducing chemical reactions PY - 2012 SN - 978-3-527-30673-2 U6 - https://doi.org/10.1002/14356007.q20_q01 SP - 1 EP - 50 PB - Wiley-VCH CY - Weinheim AN - OPUS4-58108 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wilrich, Cordula A1 - Brandes, Elisabeth A1 - Michael-Schulz, Heike A1 - Schröder, Volkmar A1 - Schwarz, Silke A1 - Wehrstedt, Klaus-Dieter T1 - UN GHS ‒ Physical hazard classifications of chemicals: A critical review of combinations of hazard classes N2 - One of the fundamental principles of the UN-GHS (Globally Harmonized System of Classification and Labelling of Chemicals) is that all hazards of a chemical should be assigned and communicated. There is no general prioritization of hazards in the sense that certain hazard classes are not applicable if another one has been assigned. In contrast to health and environmental hazards, there are physical or chemical factors which preclude certain combinations of physical hazard classes. So far, there is no common understanding as to which combinations are relevant and which not. For example, should a pyrophoric liquid be classified as flammable liquid in addition, or is this redundant and unnecessary? In the course of the implementation of the GHS by countries or sectors and the actual application by industry all over the world, such questions become more and more important. This publication systematically discusses all combinations of the UN-GHS physical hazard classes and assesses them with regard to the relevance of possible simultaneous assignment to a chemical. For many of the combinations an unambiguous decision based on theGHS alone is not possible, thus confirming that the question which physical hazard classes might be assigned simultaneously to a chemical is not trivial. As one more milestone on the path to a globally harmonized system for the classification of hazardous chemicals, this should be discussed and ultimately solved on a global basis. It is the hope that this publication might serve as an impetus for such discussions. KW - UN-GHS KW - Globally Harmonized System of Classification and Labelling of Chemicals KW - Hazardous chemicals KW - Chemicals classification KW - Physical hazards PY - 2017 UR - https://www.sciencedirect.com/science/article/pii/S1871553217300336 U6 - https://doi.org/10.1016/j.jchas.2017.03.005 SN - 1871-5532 VL - 24 IS - 6 SP - 15 EP - 28 PB - Elsevier Inc. AN - OPUS4-42704 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Struck, Werner A1 - Limberger, Ernst A1 - Brandes, Klaus ED - Becker, Gerhard Wilhelm T1 - Zur Abschätzung der Beanspruchung in Flächentragwerken bei örtlicher Stoßbelastung mit Parameterstudie am Beispiel einer Stahlbeton-Kugelschale PY - 1973 SP - 137 EP - 140 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9597 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Limberger, Ernst A1 - Brandes, Klaus A1 - Herter, Jürgen A1 - Berner, Klaus T1 - Kinetische Grenztragfähigkeit von stoßartig belasteten Stahlbetonbauteilen - Versuche an Stahlbetonbalken, Teil 2 N2 - 5. Bericht im Rahmen d. Forschungsvorhabens 1500 121. Es ist die Fortsetzung und Ergänzung der im Bericht 127 dokumentierten und erläuterten Versuche an Stahlbetonbalken. T3 - BAM Forschungsberichtreihe - 128 KW - Kinetische Grenztragfähigkeit KW - Stahlbetonbalken KW - Statische Beanspruchung KW - Stoßbeanspruchung KW - Servo-hydraulische Versuchseinrichtung KW - Energieaborptionsvermögen KW - Biegeversagen KW - Plastisches Gelenk KW - Beanpruchungsgeschichte PY - 1986 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-3226 SN - 978-3-88314-568-8 SN - 0938-5533 VL - 128 SP - 1 EP - 88 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-322 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Limberger, Ernst A1 - Brandes, Klaus A1 - Herter, Jürgen A1 - Berner, Klaus T1 - Kinetische Grenztragfähigkeit von stoßartig belasteten Stahlbetonbauteilen - Versuche an Stahlbetonbalken, Teil 1 N2 - 3. Bericht über experimentelle Untersuchungen an Stahlbetonbalken, die im Rahmen des Forschungsvorhabens 1500 121 durchgeführt worden sind. Es sollen damit Kenntnisse über die Verformbarkeit und der Verformungswiderstand gewonnen werden. T3 - BAM Forschungsberichtreihe - 127 KW - Stahlbetonbalken KW - Kinetische Grenztragfähigkeit KW - Statische Beanspruchung KW - Stoßbeanspruchung KW - Servohydraulische Beanspruchung KW - Energieabsoptionsvermögen KW - Biegeversagen KW - Plastisches Gelenk KW - Beanpruchungsgeschicht PY - 1986 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-3235 SN - 978-3-88314-664-5 SN - 0938-5533 VL - 127 SP - 1 EP - 181 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-323 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Limberger, Ernst A1 - Brandes, Klaus A1 - Herter, Jürgen T1 - Grenztragfähigkeit von Stahlbetonbauteilen unter Stoßbelastung PY - 1977 SN - 0340-7551 VL - 7 IS - 3 SP - 149 EP - 152 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-8641 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Limberger, Ernst A1 - Brandes, Klaus A1 - Herter, Jürgen ED - Plauk, Günther ED - Plank, Arno T1 - Influence of mechanical properties of reinforcing steel on the ductility of reinforced concrete beams with respect to high strain rates T2 - RILEM-CEB-IABSE-IASS-Interassociation Symposium CY - Berlin, Germany DA - 02.06.1982 PY - 1982 SP - 134 EP - 145 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-36112 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Limberger, Ernst A1 - Brandes, Klaus A1 - Herter, Jürgen T1 - Etude expérimentale des poutres et dalles en béton armé soumises aux charges dynamiques appliquées par un système hydraulique T2 - Effets cycliques et transitoires dans les structures - Séminaire CY - Saint-Rémy-les-Chevreuse, France DA - 1979-10-23 PY - 1980 SP - 151 EP - 164 PB - Ed. du Bâtiment et des Travaux Publics CY - Paris AN - OPUS4-34041 LA - fra AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Limberger, Ernst A1 - Brandes, Klaus T1 - Versuche zum Verhalten von Stahlbetonbalken mit Übergreifungsstößen der Zugbewehrung unter stoßartiger Belastung N2 - Als Stahlsorte wurde Betonstahl BSt 500 S, Stabdurchmesser 10 mm und 20 mm, verwendet. Ziel der Versuche war es, das Trag- und Verformungsverhalten von StahIbetonbalken mit und ohne Übergreifungsstoß sowohl bei dynamischer Belastung als auch bei statischer Belastung zu untersuchen. T3 - BAM Forschungsberichtreihe - 157 KW - Stahlbetonbalken KW - Übergreifungsstoß KW - Versuche KW - statische Beanspruchung KW - Stoßbeanspruchung KW - Biegeversagen KW - kinetische Grenztragfähigkeit KW - servo-hydraulische Versuchseinrichtung PY - 1989 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-2936 SN - 978-3-88314-888-1 SN - 0938-5533 VL - 157 SP - 1 EP - 104 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-293 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herter, Jürgen A1 - Limberger, Ernst A1 - Brandes, Klaus ED - Clarke, J. L. ED - Garas, F. K. T1 - Experimental and numerical investigations of reinforced concrete structural members subjected to impact load T2 - Design of concrete structuresthe use of model analysis CY - Garston/Watford, England DA - 1984-11-29 PY - 1985 SN - 0-85334-387-X SP - 168 EP - 178 PB - Applied Science Publ. CY - London AN - OPUS4-34011 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -