TY - CONF A1 - Liehr, Sascha A1 - Wendt, Mario A1 - Krebber, Katerina T1 - Distributed strain and length change measurement in POF using optical frequency domain reflectometry N2 - We show that the incoherent optical frequency domain (l-OFDR) technique provides superior performance compared to standard OTDR techniques in terms of spatial resolution and measurement time. The distributed strain measurement capabilities of perfluorinated POF up 100 % strain are shown and distributed length change measurement using correlation techniques and OFDR are presented. T2 - POF 2010 - 19th International conference on plastic optical fibers CY - Yokohama, Japan DA - 2010-10-19 PY - 2010 IS - Sensors-2 SP - 1 EP - 4 AN - OPUS4-22383 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - Schukar, Marcus A1 - Wendt, Mario A1 - Witt, Jens T1 - Distributed POF sensors - recent progress and new challenges N2 - The potential of the use of POF as distributed sensors in several application fields has been successfully demonstrated. The distributed POF sensors have moved from the laboratory to the field. The paper presents the recent progress in the development of distributed POF sensors and addresses the main challenges to this innovative technology. T2 - POF 2010 - 19th International conference on plastic optical fibers CY - Yokohama, Japan DA - 2010-10-19 PY - 2010 IS - Sensors-2 SP - 1 EP - 4 AN - OPUS4-22305 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lenke, Philipp A1 - Wendt, Mario A1 - Liehr, Sascha A1 - Krebber, Katerina T1 - The impact of temperature and humidity on the backscatter profile of PMMA POF N2 - In this paper the influence of combined temperature and strain changes as well as changes of moisture content on polymer optical fibers made of polymethyl methacrylat (PMMA) is investigated. The increase of the scattering coefficient with increasing temperature for various strain levels is observed and quantified. The measurement results of influence of humidity on scattering intensity of PMMA-POF encourage to porpose these as a distributed humidity sensor. T2 - POF 2010 - 19th International conference on plastic optical fibers CY - Yokohama, Japan DA - 2010-10-19 KW - POF distributed sensing Rayleigh KW - Humiditiy KW - OTDR KW - Strain PY - 2010 SP - 1 EP - 7(?) AN - OPUS4-22685 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lenke, Philipp A1 - Wendt, Mario A1 - Liehr, Sascha A1 - Krebber, Katerina ED - Santos, J.L. ED - Culshaw, B. ED - López-Higuera, J.M. ED - MacPherson, W.N. T1 - Distributed humidity sensing based on Rayleigh scattering in polymer optical fibers N2 - In this document a new distributed sensor based on Rayleigh scattering in polymer optical fibers (POF) is proposed and first measurement results of the proposed sensor are shown. Different from Silica glas optical fibers POF absorb high quantities of water resulting in a change of their molecular structure and thereby reducing the present small scattering centers in areas of high humidity. The interdependence between scattering intensity and relative humidity is being investigated in case of steady cycles as well as stepwise changes of humidity and in the presence of moisture. A quantitative measure of humidity and scattering is presented. T2 - 4th European workshop on optical fibre sensors CY - Porto, Portugal DA - 2010-09-08 KW - POF KW - Distributed sensing KW - Rayleigh KW - Scattering KW - OTDR KW - Humidity PY - 2010 SN - 978-0-8194-8083-5 DO - https://doi.org/10.1117/12.866279 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE IS - 7653 SP - 76533X-1 - 76533X-4 PB - SPIE, the International Society for Optical Engineering CY - Bellingham, Wash. AN - OPUS4-22686 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Narbonneau, F. A1 - De Jonckheere, J. A1 - Jeanne, M. A1 - Kinet, D. A1 - Witt, Jens A1 - Krebber, Katerina A1 - Paquet, B. A1 - Depré, A. A1 - D´Angelo, L.T. A1 - Thiel, T. A1 - Logier, R. ED - Popp, J. T1 - OFSETH: Optical technologies embedded in smart medical textile for continuous monitoring of respiratory motions under magnetic resonance imaging N2 - The potential impact of optical fiber sensors embedded into medical textiles for the continuous monitoring of the patient during Magnetic Resonance Imaging (MRI) is now proved. We report how two pure optical technologies can successfully sense textile elongation between, 0% and 3%, while maintaining the stretching properties of the textile substrates for a good comfort of the patient. Investigating influence of different patients' morphology as well as textile integration issues to let free all vitals organs for medical staff actions, the OFSETH harness allows a continuous measurement of respiration movements. For example, anaesthesia for MRI examination uses the same drugs as for any surgical procedure. Even if spontaneous respiration can be preserved most of the time, spontaneous respiration is constantly at risk of being impaired by anaesthetic drugs or by upper airway obstruction. Monitoring of the breathing activity is needed to assess adequate ventilation or to detect specific obstruction patterns. Moreover artefacts due to physiological motions induce a blooming effect on the MRI result. The use of synchronisation devices allows reducing these effects. Positioned at certain strategic places according to the investigated organ, the presented sensors could constitute an efficient and adapted solution for respiratory synchronisation of the MRI acquisition. KW - MRI KW - Smart textile KW - Healthcare monitoring KW - Optical sensor KW - FBG KW - Respiratory sensor PY - 2010 SN - 9780819481887 DO - https://doi.org/10.1117/12.854386 VL - 7715 SP - 77151D-1 - 77151D-12 AN - OPUS4-22839 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wosniok, Aleksander A1 - Krywult, L. A1 - Liehr, Sascha A1 - Krebber, Katerina A1 - Wendt, Mario A1 - Chrost, A. T1 - Monitoring konstrukcji ziemnych przy zastosowaniu rozlozonych przestrzennie swiatlowodowych sensorów optycznych, zintegrowanych w geosyntetykach KW - Fibre optic sensor KW - Spatial distributed sensor KW - Polymer optical fibre (POF) KW - Glass optical fibre (GOF) KW - POF OTDR KW - Brillouin sensor KW - BOTDA KW - BOFDA KW - Fibre Bragg grating (FBG) KW - Geosynthetics KW - Geotextiles KW - Technical textiles PY - 2011 UR - http://journals.bg.agh.edu.pl/GORNICTWO/2011-02/GG_2011_2_63.pdf SN - 1732-6702 SN - 0138-0990 VL - 35 IS - 2 SP - 597 EP - 604 PB - Uczelniane Wydawn. Naukowo-Dydaktyczne AGH CY - Kraków AN - OPUS4-23418 LA - pol AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thiele, E. A1 - Erth, H. A1 - Helbig, R. A1 - Werth, K. A1 - Glötzl, R. A1 - Schneider, J. A1 - Nöther, Nils A1 - Wosniok, Aleksander A1 - Krebber, Katerina A1 - Schlurmann, T. A1 - Saathoff, F. T1 - Sensitive Textilstrukturen zur Deichüberwachung T2 - BAUTEX 2008, 8. Sächsisches Bautextilien-Symposium "Bauen mit Geokunststoffen" CY - Chemnitz, Deutschland DA - 2008-01-24 PY - 2008 SP - 1 EP - 5 CY - Chemnitz AN - OPUS4-17448 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - Krebber, Katerina T1 - Improvements of the distributed strain sensor based on optical time domain reflectometry measurement in polymer optical fibers N2 - Sensing characteristics of standard polymer optical fibers (POF) are further studied using the optical time domain reflectometry (OTDR) technique. The level of the backscattering inside POF, which highly increases at locations where strain is applied to the fiber, is further investigated with respect to spectral behavior, strain rate and span of time from the stretching event. An algorithem to overcome the problem of the decrease of spatial resolution as a result of pulse broadening due to modal disperion, is proposed. The research is carried out on the background of the development of a new strain sensor that is integrated in technical textiles. T2 - 17th International Conference on Plastic Optical Fibers (POF 2008) CY - Santa Clara, California, USA DA - 2008-08-25 KW - Distributed strain sensor KW - Optical fiber sensor KW - POF KW - Scatter KW - PMMA KW - Spatial resolution PY - 2008 IS - Paper 1 SP - 1 EP - 5 AN - OPUS4-18210 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liehr, Sascha A1 - Lenke, Philipp A1 - Wendt, Mario A1 - Krebber, Katerina T1 - Perfluorinated graded-index polymer optical fibers for distributed measurement of strain N2 - Recently, we have proposed, to our knowledge for the first time, to use perfluorinated graded-index polymer optical fiber (POF) for distributed measurement of strain. Thanks to their low attenuation and low modal dispersion compared to standard-POF, this fiber type allows to extend the measurement length to more than 500 meters at increased spatial resolution. In this paper, two mechanisms for strain sensing are introduced. As in standard PMMA POF, strain in the fiber can be detected by evaluating the local backscatter increase occurring at strained fiber sections. Further, we propose, to our knowledge for the first time, a true distributed length change measurement in POF using cross-correlation analysis of the fiber’s characteristic backscatter signature. Using this technique, it is possible to measure relative displacement between different fiber sections avoiding signal fading failures that are inherent in other measurement principles. Cross-sensitivities to the sensor signal, as fiber bends and temperature, are investigated and quantified. T2 - 17th International Conference on Plastic Optical Fibers (POF 2008) CY - Santa Clara, California, USA DA - 2008-08-25 KW - Distributed strain sensor KW - Optical fiber sensor KW - Perfluorinated POF KW - POF sensors PY - 2008 IS - Paper 64 SP - 1 EP - 5 AN - OPUS4-18209 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nöther, Nils A1 - Wosniok, Aleksander A1 - Krebber, Katerina ED - Francis Berghmans, ED - Mignani, Anna Grazia ED - Cutolo, Antonello ED - Patrick P. Meyrueis, ED - Thomas P. Pearsall, T1 - A distributed fiber optic sensor system for dike monitoring using Brillouin frequency domain analysis T2 - Optical Sensors 2008, April 7-10, 2008 CY - Strasbourg, France DA - 2008-04-07 KW - BOFDA KW - Brillouin sensing KW - Distributed strain measurement KW - Dike monitoring KW - Sensor-based geotextiles KW - Fibre optic sensors KW - Distributed sensors KW - Brillouin scattering PY - 2008 SN - 978-0-8194-7201-4 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE IS - 7003 SP - 700303-1 - 700303-9 PB - SPIE CY - Bellingham AN - OPUS4-18274 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wosniok, Aleksander A1 - Nöther, Nils A1 - Krebber, Katerina A1 - Thiele, E. T1 - Distributed monitoring of mechanical deformation in river dikes T2 - EUROSENSORS XXII CY - Dresden, Germany DA - 2008-09-07 KW - Fiber optic sensor KW - Distributed Brillouin sensor KW - Dike monitoring PY - 2008 SN - 978-3-00-025217-4 SP - 1457 EP - 1460 AN - OPUS4-18322 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nöther, Nils A1 - Wosniok, Aleksander A1 - Krebber, Katerina A1 - Thiele, E. ED - Ecke, Wolfgang ED - Kara J. Peters, ED - Norbert G. Meyendorf, T1 - A distributed fiber optic sensor system for dike monitoring using Brillouin optical frequency domain analysis N2 - We report on the development of a complete system for spatially resolved detection of critical soil displacement in river embankments. The system uses Brillouin frequency domain analysis (BOFDA) for distributed measurement of strain in silica optical fibers. Our development consists of the measurement unit, an adequate coating for the optical fibers and a technique to integrate the coated optical fibers into geotextiles as they are commonly used in dike construction. We present several laboratory and field tests that prove the capability of the system to detect areas of soil displacement as small as 2 meters. These are the first tests of truly distributed strain measurements on optical fibers embedded into geosynthetics. T2 - Smart Sensor Phenomena, Technology, Networks, and Systems 2008 CY - San Diego, California, USA DA - 2008-03-10 KW - BOFDA KW - Brillouin sensing KW - Distributed strain measurement KW - Dike monitoring KW - Sensor-based geotextiles KW - Fiber optic sensors KW - Distributed sensors KW - Brillouin scattering PY - 2008 SN - 978-0-8194-7119-2 DO - https://doi.org/10.1117/12.775133 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE IS - 6933 SP - 69330T-1 - 69330T-9 PB - SPIE CY - Bellingham AN - OPUS4-18250 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nöther, Nils A1 - Wosniok, Aleksander A1 - Krebber, Katerina A1 - Thiele, E. ED - W. Ostachowicz, ED - J. Holnicki-Szulc, ED - C. Mota Soares, T1 - Dike monitoring using fiber sensor-based geosynthetics N2 - We report on the development of distributed fiber sensors and their integration into geosynthetics as they are commonly used in the construction of dikes and dams for flood protection. The sensing system uses Stimulated Brillouin Scattering (SBS) in silica optical fibers. Using the Brillouin frequency analysis, the system is capable of detecting changes in both strain and temperature along the optical fibers. The strain experienced by the optical fibers corresponds to the deformation of the geosynthetics in case of a critical soil displacement. To satisfy requirements of dike structures, the system will be optimized to detect soil displacement with a spatial resolution of 5 m or less over a length in the range of 10 km. These rather modest requirements leave space for optimization on resolution of the measurement values, measurement time and cost efficiency. To our knowledge, this is the first distributed fiber sensor using SBS that is especially designed for the monitoring of soil displacement in dikes which is made possible by a novel method for the integration of optical fibers into different types of geosynthetics. T2 - 3. ECCOMAS Thematic Conference on Smart Structures and Materials CY - Gdansk, Poland DA - 2007-07-09 KW - Fiber optic sensors KW - Dike monitoring KW - SBS KW - Distributed strain sensors KW - Distributed brillouin sensors KW - Geosynthetics PY - 2007 SN - 978-83-88237-03-4 IS - Paper 03 SP - 1 EP - 13 PB - Institute of Fluid-Flow Machinery CY - Gda´nsk AN - OPUS4-18253 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Krebber, Katerina T1 - Optical Fibre Sensor Application in Civil and Geotechnical Engineering T2 - 1. Asian-Pacific Conference on Optical Fibre Sensors and 3rd International Symposium on Advances & Trends in Fiber Optics CY - Chengdu, China DA - 2008-11-07 PY - 2008 AN - OPUS4-18336 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lenke, Philipp A1 - Krebber, Katerina ED - Jones, J. ED - Culshaw, B. ED - Ecke, W. ED - López-Higuera, J.M. ED - Willsch, R. T1 - A new model to calculate the Rayleigh scattering profiles in polymer optical fibers for distributed strain sensing N2 - This paper presents new methods to calculate and interpret Rayleigh scattering profiles in polymer optical fibers (POF) recorded by optical time domain reflectometry (OTDR). In contrast to Silica glass optical fibers (GOF), POF experience inhomogeneous stress when being strained, resulting in small scattering centers which allow for a new distributed sensor based on POF. New methods to overcome issues like blurring due to modal dispersion, uncertainties due to inhomogenious losses in the fiber and signal degradation due to viscoelastic creep in the polymer, are presented, for the first time to our knowledge. T2 - 20th International conference on optical fibre sensors (Proceedings of SPIE) CY - Edinburgh, Scotland, UK DA - 2009-10-05 KW - POF KW - Distributed sensing KW - Rayleigh KW - Scattering KW - OTDR KW - Distributed strain sensor KW - Optical fiber sensor KW - PMMA KW - Spatial resolution PY - 2009 SN - 978-0-8194-7814-6 DO - https://doi.org/10.1117/12.835361 SN - 0277-786X SP - 75036I-1 - 75036I-4 PB - SPIE, the International Society for Optical Engineering AN - OPUS4-20496 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nöther, Nils A1 - Lenke, Philipp A1 - Krebber, Katerina ED - Jones, J. ED - Culshaw, B. ED - Ecke, W. ED - López-Higuera, J.M. ED - Willsch, R. T1 - A novel signal restoration method in the frequency domain to enhance spatial resolution in distributed Brillouin sensing T2 - 20th International conference on optical fibre sensors (Proceedings of SPIE) CY - Edinburgh, Scotland, UK DA - 2009-10-05 KW - Fiber-optic sensing KW - Distributed Brillouin sensing KW - Spatial resolution KW - Deconvolution PY - 2009 SN - 978-0-8194-7814-6 SN - 0277-786X SP - 75032F-1 - 75032F-4 PB - SPIE, the International Society for Optical Engineering AN - OPUS4-20467 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nöther, Nils A1 - Wosniok, Aleksander A1 - Krebber, Katerina A1 - Thiele, E. ED - Bernadette Havranek, ED - Masoud Motavalli, ED - Urs Meier, T1 - A distributed fiber-optic sensing system for monitoring of large geotechnical structures T2 - 4th International conference on structural health monitoring of intelligent infrastructure CY - Zurich, Switzerland DA - 2009-07-22 KW - Structural health monitoring KW - Distributed sensing KW - Geotextiles KW - Dike monitoring PY - 2009 SN - 978-3-905594-52-2 SP - 1 EP - 9 CY - Zurich, Switzerland AN - OPUS4-20468 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider-Gloetzl, J. A1 - Gloetzl, R. A1 - Krebber, Katerina A1 - Liehr, Sascha A1 - Wendt, Mario A1 - Wosniok, Aleksander T1 - Geotechnical monitoring of construction activities by distributed fiber optic sensors embedded in geotextiles T2 - 5th European workshop on structural-health-monitoring 2010 CY - Sorrento, Italy DA - 2010-06-29 KW - Foundation engineering KW - Geotechnical monitoring KW - Smart textiles KW - Distributed fiber optic sensors KW - POF sensors KW - Brillouin sensors PY - 2010 IS - SS4-07 SP - 1 EP - 6 AN - OPUS4-21872 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - Nöther, Nils A1 - Wendt, Mario A1 - Wosniok, Aleksander ED - Santos, J.L. ED - Culshaw, B. ED - López-Higuera, J.M. ED - MacPherson, W.N. T1 - Distributed fiber optic sensors embedded in technical textiles for structural health monitoring N2 - Technical textiles with embedded distributed fiber optic sensors have been developed for the purposes of structural health monitoring in geotechnical and civil engineering. The distributed fiber optic sensors are based on Brillouin scattering in silica optical fibers and OTDR in polymer optical fibers. Such "smart" technical textiles can be used for reinforcement of geotechnical and masonry structures and the embedded fiber optic sensors can provide information about the condition of the structures and detect the presence of any damages and destructions in real time. Thus, structural health monitoring of critical geotechnical and civil infrastructures can be realized. The paper highlights the results achieved in this innovative field in the framework of several German and European projects. T2 - 4th European workshop on optical fibre sensors CY - Porto, Portugal DA - 2010-09-08 KW - Fiber optic sensor KW - Distributed sensor KW - Brillouin sensor KW - Polymer optical fibers (POF) KW - POF sensor KW - POF OTDR KW - Strain sensor KW - Technical textiles KW - Geotextiles PY - 2010 SN - 978-0-8194-8083-5 DO - https://doi.org/10.1117/12.868052 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE IS - 7653 SP - 76530A-1 - 76530A-12 PB - SPIE, the International Society for Optical Engineering CY - Bellingham, Wash. AN - OPUS4-21948 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - Distributed fibre optic sensors embedded in technical textiles for monitoring of geotechnical and masonry structures T2 - European Workshop on Monitoring Technologies (MoDeRn) - Potential Application to Monitoring of Geological Repositories for Radioactive Waste CY - Troyes, France DA - 2010-06-07 PY - 2010 AN - OPUS4-22023 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - Distributed fiber optic sensors embedded in technical textiles for structural health monitoring T2 - 4th European Workshop on Optical Fibre Sensors (EWOFS) CY - Oporto, Portugal DA - 2010-09-08 PY - 2010 AN - OPUS4-22059 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - Protection of critical infrastructure using fiber optic sensors in technical textiles T2 - SPIE International Conference "Defense, Security + Sensing" CY - Orlando, FL, USA DA - 2010-04-05 PY - 2010 AN - OPUS4-22083 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schallert, Matthias A1 - Krebber, Katerina A1 - Hofmann, Detlef A1 - Habel, Wolfgang A1 - Stahlmann, J. T1 - Auswahl geeigneter Fasersensorprinzipien für Anwendungen in der Geotechnik T2 - Fachseminar "Messen in der Geotechnik 2004" CY - Braunschweig, Deutschland DA - 2004-09-09 PY - 2004 SN - 3-927610-68-2 N1 - Serientitel: Mitteilung des Instituts für Grundbau und Bodenmechanik - Technische Universität Braunschweig – Series title: Mitteilung des Instituts für Grundbau und Bodenmechanik - Technische Universität Braunschweig IS - 77 SP - 309 EP - 328 PB - Inst. für Grundbau und Bodenmechanik, Techn. Univ. CY - Braunschweig AN - OPUS4-4424 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - Integration von Fasersensoren zur Schadensfrüherkennung und -vermeidung T2 - Fachtagung "Windkraftanlagen Sicherheit und Zuverlässigkeit" CY - Darmstadt, Germany DA - 2004-11-04 PY - 2004 AN - OPUS4-4638 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Krebber, Katerina A1 - Gutmann, Toivo A1 - Schram, C. A1 - Meyer, D. T1 - Fibre Bragg Grating Sensors to Monitor the Rotor Blades of Wind Turbines - Criteria and Method to put them to the Best Possible Use T2 - 7th German Wind Energy Conference (DEWEK 2004) "Where Industry meets Science" CY - Wilhelmshaven, Germany DA - 2004-10-20 KW - Windkraftanlagen PY - 2004 PB - Deutsches Windenergie-Institut CY - Wilhelmshaven AN - OPUS4-5784 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Habel, Wolfgang A1 - Gutmann, Toivo A1 - Schramm, Ch. T1 - Monitoring of the rotor blades of wind turbines by fibre optic sensors N2 - In order to monitor the mechanical behaviour of the rotor blades of wind turbines, fibre optic sensors are increasingly attached to or embedded in the blades. Usually, fibre Bragg grating sensors arrays are then used. In order to investigate how stable and reliably work such sensors, fibre Bragg grating arrays were embedded into textile-reinforced composite. Long-term temperature and tensile (fatigue) tests have been carried out with composite structure specimens. This paper reports on selected results of the tests and discusses important reliability aspects with regard to the fibre design and the fibre material. T2 - 3rd International Conference on Materials Testing "TEST 2005" CY - Nuremberg, Germany DA - 2005-05-10 KW - Faseroptische Sensorik PY - 2005 SP - B.5-55-B.5-60 PB - AMA Service GmbH CY - Nürnberg AN - OPUS4-7440 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krebber, Katerina A1 - Habel, Wolfgang A1 - Gutmann, Toivo A1 - Schram, C. T1 - Fiber Bragg grating sensors for monitoring of wind turbine blades N2 - Fiber Bragg grating sensor arrays can be used to monitor the mechanical behavior of rotor blades of wind turbines. In order to investigate how stable and reliably work such sensors, different fiber Bragg gratings were embedded into textile-reinforced composite. Long-term temperature and tensile (fatigue) tests have been carried out with composite structure specimens. This paper reports on selected results of the tests and discusses important reliability aspects with regard to the fiber design and the fiber material. T2 - 17th International Conference on Optical Fibre Sensors CY - Bruges, Belgium DA - 2005-05-23 KW - Fiber Bragg grating sensors KW - Rotor blades KW - Wind turbines KW - Strain monitoring PY - 2005 SN - 0-8194-5855-4 VL - 5855 IS - Part 2/2 SP - 1036 EP - 1039 PB - SPIE CY - Bellingham AN - OPUS4-7490 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krebber, Katerina A1 - Henschel, H. A1 - Weinand, U. T1 - Fibre Bragg gratings as high dose radiation sensors? N2 - We have measured for the first time the shift of the Bragg wavelength and other parameters of fibre Bragg gratings (FBGs) exposed to radiation at different wavelengths up to a dose of 100 kGy. The results show that the FBG sensitivity to radiation increases from 820 nm to 1516 nm so that FBGs with higher Bragg wavelength, e.g. 1.55 µm, are good candidates for high dose radiation sensing: no saturation was observed up to 100 kGy and the measured wavelength shift was fairly independent on the radiation dose rate. T2 - 17th International Conference on Optical Fibre Sensors CY - Bruges, Belgium DA - 2005-05-23 KW - Fibre Bragg gratings KW - Radiation effects KW - Gamma radiation KW - Fibre sensors KW - Radiation sensors KW - Radiation dosimetry PY - 2006 DO - https://doi.org/10.1088/0957-0233/17/5/S26 SN - 0957-0233 SN - 1361-6501 VL - 17 SP - 1095 EP - 1102 PB - IOP Publ. Ltd. CY - Bristol AN - OPUS4-7491 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schram, Ch. A1 - Krebber, Katerina A1 - Habel, Wolfgang T1 - Glasfasersensoren für Rotorblätter KW - Glasfasern KW - Faser-Bragg-Gitter KW - Windenergieanlagen KW - Rotorblätter PY - 2005 SN - 1436-8773 SN - 0946-7556 VL - 15 IS - 7 SP - 32 EP - 34 PB - SunMedia CY - Hannover AN - OPUS4-11213 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - "Sensitive" Werkstoffe mittels faseroptischer Sensoren. T2 - BAM-Kolloquium CY - Berlin, Germany DA - 2005-11-09 PY - 2005 AN - OPUS4-11628 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - Monitoring of the rotor blades ofwind turbines by fibre optic snesors. T2 - TEST 2005, 3rd. International Conference on Material Testing CY - Nuremberg, Germany DA - 2005-05-10 PY - 2005 AN - OPUS4-11630 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - Fibre Bragg gratings as high dose radiation sensors? T2 - OFS 2005 17th International Conference on Optical Fibre Sensors CY - Bruges, Belgium DA - 2005-05-23 PY - 2005 AN - OPUS4-11631 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - Integration Faser-Bragg-Gitter-Sensoren in Hochleistungsverbundwerkstoffe zur Früherkennung von Schädigungen. T2 - Vortrag auf der Sitzung des GESA-AK 17 "Faseroptische Sensorik" CY - Cologne, Germany DA - 2005-01-20 PY - 2005 AN - OPUS4-11732 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - Protection of critical infrastructure usingfibre optic sensors T2 - Europäische Konferenz "Safety and Security Systems in Europe" CY - Potsdam, Germany DA - 2006-11-30 PY - 2006 AN - OPUS4-13991 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thiele, E. A1 - Erth, H. A1 - Arnold, R. A1 - Habel, Wolfgang A1 - Krebber, Katerina A1 - Döring, H. A1 - Glötzl, R. T1 - Applikation optischer Fasern in Textilflächen T2 - 45. Internationale Chemiefasertagung CY - Dornbirn, Österreich DA - 2006-09-21 KW - Optische Fasern KW - Faseroptische Sensoren KW - Geotextilien PY - 2006 SP - 1 EP - 5(?) CY - Dornbirn AN - OPUS4-14457 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Dantan, Nathalie A1 - Hofmann, Detlef A1 - Krebber, Katerina A1 - Schallert, Matthias T1 - Ausgewählte Anwendungsbeispiele faseroptischer Sensoren im Ingenieurbau und in der Geotechnik T2 - Ingenieurvermessung 07 CY - Graz, Österreich DA - 2007-04-17 PY - 2007 SP - 281 EP - 294 PB - Wichmann CY - Graz AN - OPUS4-14760 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grillet, A. A1 - Kinet, D. A1 - Witt, Jens A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - Pirotte, F. A1 - Depré, A. T1 - Optical fibre sensors embedded into medical textiles for monitoring of respiratory movements in MRI environment T2 - EWOFS 2007 - 3rd European Workshop on Optical Fibre Sensors CY - Napoli, Italy DA - 2007-07-04 KW - Respiration sensor KW - Fibre optic sensor KW - POF KW - POF sensor KW - Bending sensor KW - Strain sensor KW - OTDR KW - Medical textiles PY - 2007 SN - 9780819467614 SN - 0277-766X VL - 6619 SP - 66191R-1 - 66191R-4 AN - OPUS4-15842 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krebber, Katerina T1 - Protection of Critical Infrastructure Using Fibre Optic Sensors PY - 2007 SN - 0948-3128 IS - 4 SP - 12 EP - 14 CY - Teltow AN - OPUS4-15694 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Poisel, H. A1 - Kalymnios, D. A1 - Krebber, Katerina A1 - Scully, P. A1 - Werneck, M. A1 - Zubia, J. T1 - POF Sensors - applications in every day's life T2 - 33rd European Conference and Exhibition on Optical Communication CY - Berlin, Germany DA - 2007-09-16 PY - 2007 VL - 2 SP - 103 EP - 106 PB - VDI-Verl. CY - Berlin AN - OPUS4-15943 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Witt, Jens A1 - Bunge, C.-A. A1 - Schukar, Marcus A1 - Krebber, Katerina T1 - Real-time strain sensing based on POF OTDR N2 - We investigate two real-time strain sensing principles based on the optical time-domain reflectometry (OTDR) in polymer optical fibres (POF). The first sensing principle uses the increase of the level of backscattered light in a stretched POF. The second sensing principle uses the effect of losses due to bending. T2 - 16th International Conference on Plastic Optical Fibers (POF 2007) CY - Turin, Italy DA - 2007-09-10 KW - Strain sensor KW - Fibre optic sensor KW - POF sensor KW - OTDR KW - Strain rate PY - 2007 SP - 210 EP - 213 PB - International Cooperative of Plastic Optical Fibers (ICPOF) CY - Turin, Italy AN - OPUS4-15922 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - Scheer, M. ED - Bernd Henning, T1 - Strahlungsüberwachung mit Faser-Bragg-Gitter-Sensoren am Elektronenspeicherring BESSY II T2 - 21. Messtechnisches Symposium des Arbeitskreises der Hochschullehrer für Messtechnik e.V, CY - Paderborn, Deutschland DA - 2007-09-20 KW - Faser-Bragg-Gitter KW - Fasersensoren KW - Strahlungssensoren KW - Strahlungseffekte KW - Strahlungsdosimetrie KW - Elektronenspeicherring PY - 2007 SN - 978-3-8322-6539-7 SP - 178 EP - 189 PB - Shaker CY - Aachen AN - OPUS4-16314 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Krebber, Katerina A1 - Dantan, Nathalie A1 - Schallert, Matthias A1 - Hofmann, Detlef ED - Bin Shi, T1 - Recent examples of applied fibre optic sensors in geotechnical areas to evaluate and monitor structural integrity T2 - OSMG-2007 - 2nd International Workshop on Opto-electronic Sensor-based Monitoring in Geo-engineering CY - Nanjing, China DA - 2007-10-18 KW - Fibre optic sensors KW - Monitoring KW - Geotechnique KW - Pile load test KW - pH sensor KW - Geotextile monitoring KW - Ground anchor monitoring KW - Distributed sensor PY - 2007 SP - 27 EP - 35 CY - Nanjing, China AN - OPUS4-16431 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - Krebber, Katerina A1 - Weigand, F. A1 - Thiele, E. T1 - Distributed strain measurement with polymer optical fiber integrated in technical textiles using the optical time domain reflectometry technique N2 - The presented research is carried out on the background of the development of a new strain sensor, integrated in technical textiles using the optical time domain reflectometry (OTDR) technique. We investigated the effect of increased scattering in POF due to applied strain as a distributed sensor including research on long-term stability and reliability of this sensor. T2 - 16th International Conference on Plastic Optical Fibers (POF 2007) CY - Turin, Italy DA - 2007-09-10 PY - 2007 SP - 21 EP - 24 PB - International Cooperative of Plastic Optical Fibers (ICPOF) CY - Turin, Italy AN - OPUS4-16435 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lenke, Philipp A1 - Krebber, Katerina A1 - Muthig, M. A1 - Weigand, F. A1 - Thiele, E. ED - W. Ostachowicz, ED - J. Holnicki-Szulc, ED - C. Mota Soares, T1 - Distributed strain measurement using polymer optical fiber integrated in technical textile to detect displacement of soil N2 - Sensing characteristics of polymer optical fibers (POF) are studied using the optical time-domain reflectometry technique. For the first time to our knowledge, investigations are carried out with respect to integration of POF in technical textiles for distributed measurement of mechanical deformation. The research on this new sensor type focuses on its application in monitoring of geotechnical structures such as railway embankments, dikes, slopes and dams. We report on a distributed sensor system using POF integrated in technical textiles as sensing elements for measurement of displacement of soil. This sensor system is very robust – it withstands the integration under rough condition at a construction site – and can detect strain of more than 40 % over distances of more than 100 meters. T2 - 3. ECCOMAS Thematic Conference on Smart Structures and Materials CY - Gdansk, Poland DA - 2007-07-09 KW - OTDR KW - Strain sensor KW - Distributed sensing KW - Fiber optic sensor KW - POF sensor KW - Technical textile KW - Geotextile PY - 2007 SN - 978-83-88237-03-4 IS - Paper 03 SP - 1 EP - 8 PB - Institute of Fluid-Flow Machinery CY - Gda´nsk AN - OPUS4-16437 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Witt, Jens A1 - Schukar, Marcus A1 - Krebber, Katerina ED - Gerald Gerlach, ED - Peter Hauptmann, T1 - Polymeroptische Fasersensoren in der Medizintechnik T2 - 8. Dresdner Sensor-Symposium CY - Dresden, Deutschland DA - 2007-12-10 KW - OTDR KW - POF KW - Faseroptischer Sensor KW - Atmungssensor PY - 2007 SN - 978-3-940046-45-1 N1 - Serientitel: Dresdner Beiträge zur Sensorik – Series title: Dresdner Beiträge zur Sensorik VL - 29 IS - 29 SP - 223 EP - 226 PB - TUDpress, Verlag der Wissenschaften GmbH CY - Dresden AN - OPUS4-16427 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Glötzl, R. A1 - Schneider Glötzl, J. A1 - Wosniok, Aleksander A1 - Krebber, Katerina A1 - Krywult, L. ED - Wintera, J. ED - Kosik, A. ED - Wity, A. T1 - Optical distributed sensing systems and possible applications in geotechnical measuring N2 - In comparison with traditional measuring Systems (pressure cells, piezometers and inclinometers which produce only point measurements) fibre optic sensors are well suited for spatiallydistributed monitoring purposes. The very tiny optical fibres of a diameter of less then 1 mm can operate as sensors in strong electromagnetic fields, under “harsh” explosive and Chemical environments and under ionizing radiation. T2 - XIV Dam monitoring international conference 'safetyof dams - new challenges' ('Bezpieczenstwo zapór - nowe wyzwania') CY - Walbrzych, Poland DA - 13.06.2011 KW - Fibre optic sensor KW - Spatial distributed sensor KW - Polymer optical fibre (POF) KW - Glass optical fibre (GOF) KW - POF OTDR KW - Brillouin sensor KW - BOTDA KW - BOFDA KW - Fibre Bragg grating (FBG) KW - Geosynthetics KW - Geotxtiles KW - Technical textiles PY - 2011 SN - 978-83-61102-53-3 N1 - Serientitel: Monografie - Instytutu Meteorologii i Gospodarki Wodnej – Series title: Monografie - Instytutu Meteorologii i Gospodarki Wodnej IS - Chapter 6 SP - 173 EP - 180 AN - OPUS4-24066 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liehr, Sascha A1 - Krebber, Katerina T1 - A dynamic fiber optic strain and power change sensor N2 - A dynamic and quasi-distributed sensor principle for simultaneous measurement of length changes and optical power changes between reflection points in an optical fiber is presented. The technique is based on the incoherent optical frequency domain reflectometry (I-OFDR). Length change resolutions < 1 µm and measurement repetition rates up to 2 kHz can be achieved using standard single-mode and multi-mode optical fibers. Simultaneous length change and refractive index measurement as well as field test results showing the deformation of a masonry building under seismic load are presented. Promising fields of application for this technique are the structural health monitoring sector and chemical process control. T2 - 21st International conference on optical fibre sensors CY - Ottawa, Canada DA - 15.05.2011 KW - Distributed sensor KW - Strain sensor KW - Optical fiber sensor KW - Structural health monitoring KW - OFDR KW - Dynamic sensor PY - 2011 SN - 978-0-8194-8246-4 DO - https://doi.org/10.1117/12.884577 VL - 7753 SP - 775351-1 EP - 775351-4 AN - OPUS4-24266 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Habel, Wolfgang A1 - Krebber, Katerina T1 - Fiber-optic sensor applications in civil and geotechnical engineering N2 - Different types of fiber-optic sensors based on glass or polymeric fibers are used to evaluate material behavior or to monitor the integrity and long-term stability of load-bearing structure components. Fiber-optic sensors have been established as a new and innovative measurement technology in very different fields, such as material science, civil engineering, light-weight structures, geotechnical areas as well as chemical and high-voltage substations. Very often, mechanical quantities such as deformation, strain or vibration are requested. However, measurement of chemical quantities in materials and structure components, such as pH value in steel reinforced concrete members also provides information about the integrity of concrete structures. A special fiber-optic chemical sensor for monitoring the alkaline state (pH value) of the cementitious matrix in steel-reinforced concrete structures with the purpose of early detection of corrosion-initiating factors is described. The paper presents the use of several fiber-optic sensor technologies in engineering. One example concerns the use of highly resolving concrete-embeddable fiber Fabry-Perot acoustic emission (AE) sensors for the assessment of the bearing behaviour of large concrete piles in existing foundations or during and after its installation. Another example concerns fiber Bragg grating (FBG) sensors attached to anchor steels (micro piles) to measure the strain distribution in loaded soil anchors. Polymer optical fibers (POF) can be — because of their high elasticity and high ultimate strain – well integrated into textiles to monitor their Deformation behaviour. Such 'intelligent' textiles are capable of monitoring displacement of soil or slopes, critical mechanical deformation in geotechnical structures (dikes, dams, and embankments) as well as in masonry structures during and after earthquakes. KW - Fiber-optic sensor KW - Monitoring KW - Earthquake damage assessment KW - Steel-reinforced structures KW - pH sensor KW - Geotextiles KW - Distributed sensor PY - 2011 DO - https://doi.org/10.1007/s13320-011-0011-x SN - 1674-9251 VL - 1 IS - 3 SP - 268 EP - 280 PB - Springer CY - Heidelberg ; Secaucus, NJ AN - OPUS4-24256 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nöther, N. A1 - Krebber, Katerina A1 - Schneider-Glötzl, J. T1 - An all-digital implementation of the Brillouin optical frequency domain analysis for long-range distributed strain and temperature monitoring N2 - For long-range measurements in geotechnical and industrial applications, distributed optical fiber sensors have become a tool of increasing importance throughout the past decade. Classic deformation monitoring (performed by strain gauges etc.) and temperature monitoring (Pt100 and alike) deliver data from fixed, single spots of a structure; quasidistributed measurements (fiber bragg gratings) provide a Chain of discrete measurement points along a limited sensing length. In contrast, an opticai fiber connected to a device for distributed strain and temperature sensing (DTSS) will provide a continuous profile of strain and temperature - spatially resolved down to less than 1 m - over a ränge of several tens of kilometers. In DTSS measurements, the nonlinear opticai effect of stimulated Brillouin Scattering (SBS) is employed: two light waves with a stable, tunable frequency offset are injected into opposite ends of the sensing fiber, where they will form a beat pattem, at which parts of the light will be scattered. By matching the frequency offset of the light waves to the propagation of acoustic fluctuation in the opticai fiber, a power transfer from one light wave to the other can be measured; since the acoustic propagation directly shifts with train and temperature of the fiber, these two quantities can be measured by tuning the light waves’ frequency offset. T2 - 8th International symposium on field measurements in geomechanics - FMGM 2011 CY - Berlin, Germany DA - 12.09.2011 PY - 2011 SP - 1 EP - 6 AN - OPUS4-24664 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Witt, Jens A1 - Krebber, Katerina A1 - Demuth, J. A1 - Sasek, L. T1 - Fiber optic heart rate sensor for integration into personal protective equipment N2 - This paper reports on a fiber optic sensor for heart rate measurements. The sensor will be integrated into personal protective equipment within the framework of the FP7 EU project i-Protect. Two different sensor prototypes were developed. One is based on fiber Bragg gratings in silica fiber and the other one is based on macrobending effects in polymer optical fiber. T2 - International workshop BioPhotonics 2011 CY - Parma, Italy DA - 08.06.2011 KW - Smart textile KW - Healthcare monitoring KW - Fiber optical sensor KW - FBG KW - Heart rate sensor KW - Macrobending sensor PY - 2011 SN - 978-1-4244-9837-6 DO - https://doi.org/10.1109/IWBP.2011.5954836 IS - Th6.26 SP - 1 EP - 3 AN - OPUS4-24498 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Witt, Jens A1 - Breithaupt, Mathias A1 - Erdmann, Jessica A1 - Krebber, Katerina T1 - Humidity sensing based on microstructured POF long period gratings N2 - We investigated the capabilities of long period gratings (LPG) in single-mode microstructured polymer optical fibre (mPOF) for humidity sensing. For that mPOF LPGs were exposed to different humidity levels at a constant temperature of 30°C in a climate chamber. During the long term tests, which took up several weeks, the humidity was changed in several steps while mPOF LPG wavelength and fibre attenuation were measured. We also measured the water uptake of mPOF in environment with different relative humidity. T2 - POF 2011 - 20th International conference on plastic optical fibers CY - Bilbao, Spain DA - 14.09.2011 KW - Microstructured polymer optical fibre (mPOF) KW - Long period grating (LPG) KW - Humidity sensor PY - 2011 SP - 1 EP - 6 AN - OPUS4-24501 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liehr, Sascha A1 - Krebber, Katerina ED - De Roeck, G. ED - Degrande, G. ED - Lombaert, G. ED - Müller, G. T1 - A novel quasi-distributed long-gauge fiber optic strain sensor system for dynamic measurement N2 - We present a novel technique based on incoherent optical frequency domain reflectometry (OFDR) to measure length changes quasi-distributed between reflection points in optical fibres. The technique enables length changes to be measured with a resolution better than 1 µm and allows for static and dynamic measurement capabilities up to 2 kHz. We demonstrate that dynamic measurements of multiple fibre sections can be conducted independently from each other with high precision. Due to the precise and dynamic measurement capabilities, the proposed sensor system is expected to open new fields of application, especially in the structural-health-monitoring sector. Possible applications are discussed in the paper. T2 - EURODYN 2011 - 8th International conference on structural dynamics CY - Leuven, Belgium DA - 04.07.2011 KW - Distributed sensor KW - Strain sensor KW - Optical fiber sensor KW - Structural health monitoring KW - OFDR KW - Length change measurement KW - Dynamic sensor PY - 2011 SN - 978-90-760-1931-4 SP - 2097 EP - 2102 AN - OPUS4-24347 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Simultaneous measurement of temperature and strain distribution using Brillouin scattering in dispersion-shifted fibers N2 - We studied Brillouin gain spectrum characteristics in dispersion-shifted fibers having compound GeO2-doping compositions in the fiber core to realize simultaneous measurement of distributed strain and temperature. Due to various dopant concentration alongside the radius of tested nonzero dispersion-shifted fibers several multiple Brillouin scattering resonances were observed in the stimulated Brillouin spectra arose through backscattering on higher acoustic modes which propagated along the fiber axis. As a result of the varying acoustic velocities, the Brillouin resonance peaks featured different temperature coefficients which can be used to accomplish the simultaneous measurement of fiber strain and temperature. We presented our first measurement results for NZDS Fujikura and LEAF Corning fiber and discussed the superior sensory suitability of the former fiber types. T2 - IEEE Sensors 2011 conference CY - Limerick, Ireland DA - 28.10.2011 KW - Fiber optic sensor KW - Spatial distributed sensor KW - Brillouin gain spectrum (BGS) KW - Nonzero dispersion-shifted fiber (NZDSF) KW - Brillouin sensor KW - BOTDA KW - BOFDA PY - 2011 SN - 978-1-4244-9288-6 SP - 1476 EP - 1479 AN - OPUS4-24828 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krebber, Katerina A1 - Habel, Wolfgang T1 - Fibre-optic sensors embedded in geotechnical textiles and concrete piles for structural health monitoring N2 - Fibre-optic sensors are more and more used in geotechnical and civil engineering. There are a big number of applications with the purpose of improvement or proof of the structural integrity. This paper, presents two examples where different fibre sensor types.are exploited for safety-relevant task in geotechnique. Technical textiles with embedded distributed fibre-optic sensors based on Brillouin Scattering in silica optical fibres and OTDR (optical time-domain reflectometry) in polymer optical fibres are presented. Such “smart” technical textiles can be used for reinforcement of geotechnical structures and masonry walls, and the embedded fibre-optic sensors can provide information about the condition of the structures as well as detect the presence of any damage and destructions in real time. Highly sensitive fibre-optic geophones based on Fabry-Perot sensors embedded in large concrete pile can be used for precise measurement of Deformation and wave distribution during static and dynamic pile test. Such sensors make the evaluation of the pile’s integrity and load-bearing capacity easier. KW - Faseroptischer Sensor KW - Verteilter Sensor KW - Brillouin-Sensor KW - Polymeroptischer Sensor KW - POF OTDR KW - Technisches Textil KW - Geotextil KW - Dehnungssensor KW - Geophon KW - Pfahltest KW - Akustische Welle KW - Fabry-Perot KW - Fibre-optic sensor KW - Distributed sensor KW - Polymer optical fibres (POF) KW - POF sensor KW - Strain sensor KW - Technical textiles KW - Geotextiles KW - Geophone KW - Fabry-Perot sensor KW - Pile test KW - Impact KW - Acoustic wave PY - 2011 SN - 0002-5968 VL - 7 SP - 252 EP - 263 PB - Wichmann CY - Heidelberg AN - OPUS4-24816 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lenke, Philipp A1 - Wendt, Mario A1 - Krebber, Katerina A1 - Glötzl, R. ED - Bock, W.J. ED - Albert, J. ED - Bao, X. T1 - Highly sensitive fiber optic inclinometer - easy to transport and easy to install N2 - We present the status of our work on a tube shaped 3D deformation sensor based on continuously distributed fiber optic sensing. A sensor tube of very large diameter is used to ensure high sensitivity while the transportability and applicability are still comfortable due to our application strategy. The setup is designed to use different measurement techniques in the applied optical fibers including Brillouin based measurements and interferometric optical frequency domain measurements using an OBR 4400 from Luna Technologies. T2 - 21st International conference on optical fiber sensors (OFS 21) CY - Ottawa, Canada DA - 15.05.2011 KW - Inclinometer KW - Bend KW - Sensor KW - Fiber KW - Optic KW - Brillouin KW - OBR PY - 2011 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE VL - 7753 SP - 775352-1 EP - 775352-4 AN - OPUS4-24970 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - Structural health monitoring by smart technical textiles based on fiber optic sensors T2 - International Conference on Structural Health Monitoring of Intelligent Infrastructure, SHMII-5 CY - Cancún, Mexico DA - 2011-12-11 PY - 2011 AN - OPUS4-24960 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina ED - Ramos, G. A. T1 - Structural health monitoring by smart technical textiles based on fiber optic sensors N2 - Technical textiles with embedded distributed fiber optic sensors have been developed for the purposes of structural health monitoring in geotechnical and civil engineering. The distributed fiber optic sensors are based on Brillouin Scattering in silica optical fibers and OTDR in polymer optical fibers. Such “smart” technical textiles can be used for reinforcement of geotechnical and masonry structures and the embedded fiber optic sensors can provide information about the condition of the structures and detect the presence of any damages and destructions in real time. Thus, structural health monitoring of critical geotechnical and civil infrastructures can be realized. The paper highlights the results achieved in this innovative field in the framework of several German and European projects. T2 - SHMII-5 - 5th International conference on structural health monitoring of intelligent infrastructure CY - Cancún, Mexico DA - 11.12.2011 PY - 2011 IS - Keynote Lecture SP - 1 EP - 10 PB - National Autonomous University of Mexico CY - Mexico City AN - OPUS4-25261 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - Polymer Optical Fibres in Sensing - Applications & Future Demands T2 - IEEE Sensors 2011 Conference CY - Limerick, Ireland DA - 2011-10-28 PY - 2011 AN - OPUS4-24939 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - Development of a PMMA-POF based fiber optic inclinometer with smart transport and installation characteristics T2 - 6th European Workshop on Structural Health Monitoring (EWSHM) CY - Dresden, Germany DA - 2012-06-03 PY - 2012 AN - OPUS4-26456 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - Smart Technical Textiles Based on Fibre Optic Sensors - Technologies and Applications T2 - CIMTEC 2012: 4. International Conference "Smart Materials, Structures and Systems" CY - Montecatini Terme, Italy DA - 2012-06-10 PY - 2012 AN - OPUS4-26457 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - Fiber Optic Sensors in Technical Safety Sciences T2 - Workshop "Trends in Fiber Optics 2012" CY - Jena, Germany DA - 2012-02-23 PY - 2012 AN - OPUS4-26458 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - POF sensors for structural health monitoring - applications and future demands (invited presentation) T2 - 21st International Conference on Plastic Optical Fibers, POF 2012 CY - Atlanta, GA, USA DA - 2012-09-10 PY - 2012 AN - OPUS4-26792 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Mizuno, Y. A1 - Krebber, Katerina A1 - Nakamura, K. ED - Jaroszewicz, L.R. T1 - L-BOFDA: a new sensor technique for distributed Brillouin sensing N2 - We propose a new scheme of Brillouin optical frequency-domain analysis (BOFDA) for distributed fiber-optic strain and temperature sensing, named linear-configured BOFDA (L-BOFDA). In conventional loop-configured BOFDA, light injection into both ends of a fiber under test (FUT) is needed for counter-propagation of pump and probe waves. In contrast, in L-BOFDA, pump and probe waves are injected into the same end of an FUT, and the probe wave Fresnelreflected (or mirror-reflected) at the other end of the FUT is exploited; thus, one-end access is feasible. We show proof-of-concept results of distributed strain measurement in a silica single-mode fiber with L-BOFDA, and discuss the signal-to-noise ratio degradation and the benefit in developing distributed Brillouin sensors based on polymer optical fibers. T2 - EWOFS 2013 - 5th European workshop on optical fibre sensors CY - Kraków, Poland DA - 19.05.2013 KW - Brillouin optical frequency-domain analysis (BOFDA) KW - L-BOFDA KW - Optical fiber sensing KW - Distributed strain measurement KW - Stimulated Brillouin scattering KW - Polymer optical fiber PY - 2013 DO - https://doi.org/10.1117/12.2025378 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE VL - 8794 IS - Paper 8794 - 181 SP - 879431-1 EP - 879431-4 AN - OPUS4-28961 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Krebber, Katerina T1 - Application of fiber-optic sensors for health monitoring purposes in geo-engineering T2 - 4th International forum on opto-electronic sensor-based monitoring in geo-engineering CY - Suzhou, China DA - 2012-10-11 KW - BOFDA KW - Fibre-optic sensor KW - Distributed sensor KW - Brillouin sensor KW - Polymer optical fibers (POF) KW - POF sensor KW - POF OTDR KW - Strain sensor KW - Technical textiles KW - Geotextiles KW - Geophone KW - Fabry-Perot sensor KW - Pile test KW - Impact KW - Acoustic wave PY - 2012 SP - 4 EP - 15 AN - OPUS4-27259 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Liehr, Sascha A1 - Burgmeier, J. A1 - Krebber, Katerina A1 - Schade, Wolfgang T1 - Femtosecond laser structuring of polymer optical fibers for backscatter sensing N2 - Focused femtosecond laser pulses are used to create scattering damage in the core of polymer optical fibers (POF). The resulting structures are investigated regarding morphology by light microscopy and backscattered intensity using optical time domain reflectometry (OTDR). Quasi-distributed optical fiber sensing is proposed by evaluating backscatter changes at the inscribed scatter centers. Application examples for quasi-distributed measurement of fiber bends and temperature are demonstrated. KW - Femtosecond laser KW - Micromachining KW - Optical fiber sensors KW - Polymer optical fiber KW - Polymer PY - 2013 DO - https://doi.org/10.1109/JLT.2013.2250483 SN - 0733-8724 SN - 1558-2213 VL - 31 IS - 9 SP - 1418 EP - 1425 PB - Institute of Electrical and Electronics Engineers CY - New York, NY AN - OPUS4-28733 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - POFs for sensing applications N2 - The paper highlights the use of polymer optical fibers (POFs) as sensors in selected applications like structural health monitoring in geotechnical and civil engineering, composites monitoring, healthcare monitoring and personnel protection. The recent progress achieved in this field will be reviewed and the main challenges to these innovative fibre optic sensors will be adressed. T2 - 3rd Workshop on specialty optical fibers and their applications CY - Sigtuna, Sweden DA - 28.08.2013 PY - 2013 IS - T3.6 SP - 1 EP - 2 AN - OPUS4-29334 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - POFs for Sensing Applications T2 - Workshop on Specialty Optical fiber and their Applications (WSOF) CY - Sigtuna, Sweden DA - 28.08.2013 PY - 2013 AN - OPUS4-29256 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Karapanagiotis, Christos A1 - Hicke, Konstantin A1 - Krebber, Katerina T1 - Temperature and humidity discrimination in Brillouin distributed fiber optic sensing using machine learning algorithms N2 - In the last few years, the use of machine learning has emerged in the field of distributed fiber optic sensors as a promising approach to enhance their performance and provide new capabilities. In this study, we use machine learning for simultaneous measurements of temperature and humidity in polyimide (PI)-coated optical fibers based on Brillouin Brillouin optical frequency domain analysis (BOFDA). Different non-linear machine learning algorithms are employed, namely polynomial regression, decision trees and artificial neural networks (ANNs), and their discrimination performance is benchmarked against that of the conventional linear regression. The performance is evaluated using leave-one-out cross-validation to ensure that the models are reliable and able to generalize well on new data. We show that nonlinear machine learning algorithms outperform the conventional linear regression and thus could pave the way towards simultaneous cost-effective temperature and humidity distributed sensing, which has the potential to find attractive new applications in the field of civil and geotechnical engineering, from structural health monitoring of dikes and bridges to subsea cables and long pipelines corrosion detection. T2 - SPIE Photonics Europe 2022 CY - Strasbourg, France DA - 03.04.2022 KW - Distributed Brillouin sensing KW - Machine learning KW - Artificial neural networks KW - Simultaneous temperature and humidity sensing KW - BOFDA PY - 2022 DO - https://doi.org/10.1117/12.2620985 VL - 12139 SP - 1 EP - 7 PB - SPIE AN - OPUS4-54861 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Karapanagiotis, Christos A1 - Schukar, Marcus A1 - Krebber, Katerina T1 - Verteilte faseroptische Sensoren zur Zustandsüberwachung von Verbundwerkstoff-Druckbehältern T1 - Distributed fiber optic sensors for structural health monitoring of composite pressure vessels N2 - In diesem Beitrag geben wir einen umfassenden Überblick über unsere Forschung auf dem Gebiet der verteilten faseroptischen Sensorik für die strukturelle Zustandsüberwachung von Wasserstoffdruckbehältern aus Verbundwerkstoffen. Insbesondere zeigen wir, wie die Integration von faseroptischen Sensoren in Druckbehälter aus Verbundwerkstoffen die Sicherheit erhöht und gleichzeitig die Wartungskosten senkt. Die geringe Größe von Lichtwellenleitern ermöglicht ihre Integration in Verbundwerkstoffstrukturen während des Herstellungsprozesses, wodurch eine kontinuierliche Überwachung sowie eine präzise Erkennung und Lokalisierung von Strukturschäden während des Betriebs der Druckbehälter ermöglicht wird. Wir erörtern auch das Potenzial modernster Signalverarbeitungsmethoden und des maschinellen Lernens für die Weiterentwicklung der vorausschauenden Instandhaltung. Die von uns vorgestellten Anwendungen von faseroptischen Sensoren zeigen, dass sie einen wichtigen Beitrag zur Energiewende hin zu erneuerbaren Energien leisten können. KW - Verteilte faseroptische Sensoren KW - Verbundwerkstoffe KW - Wasserstoff-Druckbehälter KW - Strukturüberwachung KW - Maschinelles Lernen PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-596290 DO - https://doi.org/10.1515/teme-2023-0170 SN - 0171-8096 SP - 1 EP - 12 AN - OPUS4-59629 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Karapanagiotis, Christos A1 - Schukar, Marcus A1 - Breithaupt, Mathias A1 - Krebber, Katerina T1 - Monitoring of composite pressure vessels using surface applied distributed fiber optic sensors N2 - In this paper, we report on surface-applied distributed fibre optic sensors for monitoring composite pressure vessels designed for hydrogen storage. Previous reports have revealed that integrating optical fibres within vessel composite structures effectively enables the monitoring of structural behavior throughout their lifetime. However, integrating optical fibres during the manufacturing process is complex and time-consuming. Therefore, we aim to simplify this process by attaching the optical fibres to the vessel’s surface. This method is significantly more timeefficient than the integration process and can be applied to any vessel. Our results demonstrate that surface-applied fibre optic sensors can detect and precisely localise damage. Additionally, signs of damage can be recognised even before the damage occurs. Predictive maintenance using fibre optic sensors could reduce premature maintenance costs and periodic inspections while increasing safety and extending the vessel’s useful service life. The role of machine learning in predictive maintenance is also discussed. T2 - 20th Sensors & their Applications Conference CY - Limerick, Ireland DA - 11.08.2024 KW - Hydrogen KW - Fiber optic sensors KW - Composites KW - Machine learning KW - Structural health monitoring PY - 2024 SP - 1 EP - 4 AN - OPUS4-60911 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stajanca, Pavol A1 - Woyessa, G. A1 - Schukar, Marcus A1 - Bang, O. A1 - Krebber, Katerina T1 - Response of microstructured plastic optical fiber Bragg grating to gamma radiation N2 - Response of PMMA-based plastic optical fiber Bragg grating (FBG) to gamma radiation is investigated for the first time. FBG wavelength shift as large as 150 pm is observed for irradiation to 18 kGy. T2 - 5th Workshop on specialty optical fibers and their applications CY - Limassol, Cyprus DA - 11.10.2017 KW - Fiber Bragg gratings KW - Optical sensing and sensors KW - Plastic optical fibers KW - Gamma radiation PY - 2017 SP - Poster 19, 1 EP - 2 AN - OPUS4-42586 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Schukar, Marcus A1 - Großwig, S. A1 - Weber, U. A1 - Krebber, Katerina T1 - Monitoring acoustic events in boreholes using wavelengthscanning coherent optical time domain reflectometry in multimode fiber N2 - A distributed acoustic sensor (DAS) based on wavelength-scanning coherent optical time domain reflectometer (WS-COTDR) is tested in an underground gas storage based on a multimode fiber for the first time to the best of our knowledge. The WS-COTDR acquires the reflection spectrum by scanning the wavelength of the laser and uses the spectra to calibrate strain. It overcomes the fading problem which is common for all DAS systems, and possesses the advantage of simple configuration and low-cost. The working principle of the system is well explained and the measurement results are presented. Various artificial and natural acoustic events have been successfully detected by the WS-COTDR. Such a sensor demonstrates several advantages over the traditional DAS systems, so it is supposed to be widely used in the oil and gas industry. T2 - EAGE GeoTech 2021 Second EAGE Workshop on Distributed Fibre Optic Sensing CY - Online meeting DA - 01.03.2021 KW - Leakage detection KW - Distributed acoustic sensing KW - Distributed fiber optic sensing PY - 2021 DO - https://doi.org/10.3997/2214-4609.202131010 SP - Paper 10, 1 PB - European Association of Geoscientists & Engineers CY - Houten, Niederlande AN - OPUS4-52248 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Schukar, Marcus A1 - Großwig, S. A1 - Weber, U. A1 - Krebber, Katerina T1 - Monitoring acoustic events in boreholes using wavelengthscanning coherent optical time domain reflectometry in multimode fiber N2 - A distributed acoustic sensor (DAS) based on wavelength-scanning coherent optical time domain reflectometer (WS-COTDR) is tested in an underground gas storage based on a multimode fiber for the first time to the best of our knowledge. The WS-COTDR acquires the reflection spectrum by scanning the wavelength of the laser and uses the spectra to calibrate strain. It overcomes the fading problem which is common for all DAS systems, and possesses the advantage of simple configuration and low-cost. The working principle of the system is well explained and the measurement results are presented. Various artificial and natural acoustic events have been successfully detected by the WS-COTDR. Such a sensor demonstrates several advantages over the traditional DAS systems, so it is supposed to be widely used in the oil and gas industry. T2 - EAGE GeoTech 2021 CY - Online meeting DA - 01.03.2021 KW - Borehole monitoring KW - Distributed fiber sensing KW - Acoustic sensing PY - 2021 DO - https://doi.org/10.3997/2214-4609.202131010 SP - 1 EP - 5 AN - OPUS4-52152 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krebber, Katerina A1 - Weege, S. A1 - Großwig, S. A1 - Obermöller, M. A1 - Perk, M. A1 - Lu, Xin A1 - Schukar, Marcus A1 - Weber, U. A1 - Pfeiffer, T. A1 - Rembe, M. T1 - Kombinierte faseroptische Messungen in Bohrlöchern helfen bei der Detektion von Kleinstleckagen N2 - Seit November 2019 läuft ein breit angelegtes und vom BMWi gefördertes ZIM-Kooperationsprojekt zwischen der Bundesanstalt für Materialforschung und -prüfung (BAM), der IAB'Weimar gGmbH, der GKSO GmbH & Co. Projekt KG, der DEEP.KBB GmbH sowie der Rembe Consulting PartG mbB. Ziel des Forschungsvorhabens sind sowohl die Lokalisierung als auch die Quantifizierung insbesondere sehr kleiner Leckagen in einer Bohrlochverrohrung durch die Nutzung faseroptischer Messtechnik. Durch Messdatenkopplung und den Wegfall bewegungsbedingter Nachteile einer Messsonde werden wesentlich präzisere Ergebnisse zur Bewertung der Bohrlochintegrität als üblich erwartet. T2 - DGMK/ÖGEW-Frühjahrstagung 2020 CY - Meeting was canceled DA - 15.04.2020 KW - Wasserstoffspeicher KW - Kavernenspeicher KW - Verteilte faseroptische akustische Sensorik PY - 2020 VL - 6 SP - 43 EP - 43 PB - DVV Media Group CY - Hamburg AN - OPUS4-52233 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Schukar, Marcus A1 - Krebber, Katerina T1 - Characterizing vibration response of fiber cables for distributed acoustic sensing N2 - The vibration responses of two fiber cables are characterized up to 16 kHz and compared with a standard tight-buffered 900 um fiber. The response of the cables is suppressed due to the cable protection. T2 - 27th International Conference on Optical Fiber Sensors (OFS-27) CY - Alexandria, VA, USA DA - 29.08.2022 KW - Distributed fiber sensing KW - Acoustic sensing KW - Response characterization PY - 2022 AN - OPUS4-56099 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Schukar, Marcus A1 - Weege, S. A1 - Roske, T. A1 - Krebber, Katerina T1 - Leakage detection at a borehole simulator using distributed acoustic sensing N2 - A distributed acoustic sensing system is used to detect the leakage in a borehole simulator by measuring the leakage induced vibration. The leakage location can be clearly determined by frequency spectrum analysis. T2 - 27th International Conference on Optical Fiber Sensors (OFS-27) CY - Alexandria, VA, USA DA - 29.08.2022 KW - Leakage detection KW - Structural health monitoring KW - Distributed fiber sensing KW - Distributed acoustic sensing PY - 2022 SP - 1 EP - 4 PB - Optica CY - Washington D.C., USA AN - OPUS4-56097 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Schukar, Marcus A1 - Krebber, Katerina T1 - Characterizing vibration response of fiber cables for distributed acoustic sensing N2 - The vibration responses of two fiber cables are characterized up to 16 kHz and compared with a standard tight-buffered 900 um fiber. The response of the cables is suppressed due to the cable protection T2 - 27th International Conference on Optical Fiber Sensors (OFS-27) CY - Alexandria, VA, USA DA - 29.08.2022 KW - Response characterization KW - Distributed fiber sensing KW - Acoustic sensing PY - 2022 SP - 1 EP - 4 PB - Optica CY - Washington D.C., USA AN - OPUS4-56096 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Schukar, Marcus A1 - Weege, S. A1 - Roske, T. A1 - Krebber, Katerina T1 - Leakage detection at a borehole simulator using distributed acoustic sensing N2 - A distributed acoustic sensing system is used to detect the leakage in a borehole simulator by measuring the leakage induced vibration. The leakage location can be clearly determined by frequency spectrum analysis. T2 - 27th International Conference on Optical Fiber Sensors (OFS-27) CY - Alexandria, VA, USA DA - 29.08.2022 KW - Structural health monitoring KW - Distributed fiber sensing KW - Distributed acoustic sensing KW - Leakage detection PY - 2022 AN - OPUS4-56098 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Popiela, Bartosz A1 - Günzel, Stephan A1 - Schukar, Marcus A1 - Mair, Georg W. A1 - Krebber, Katerina A1 - Seidlitz, Holger T1 - Impact of internal pressure control during manufacturing on residual stresses and safety performance of type 4 pressure vessels N2 - Composite pressure vessels are commonly manufactured using the wet filament winding process, where various process parameters can influence the performance of the finished component. In this study two designs of wet filament wound 6.8-liter type 4 composite pressure vessels were manufactured. Both differ only by the internal pressure used during the filament winding, which primarily influences the residual stress state in the composite structure. An extensive experimental study was carried out, including 10 slow burst tests and strain measurements with fiber optic sensors. Significant differences can be observed in the performance of the two designs even though the used stacking sequence, materials and other manufacturing parameters are the same for both designs. A discussion of the differences in the behavior of both cylinder types is provided, including the strain distribution in slow burst tests and failure mechanism. KW - Residual stresses KW - Slow burst tests KW - Filament winding KW - Type 4 composite pressure vessels KW - Hydrogen PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-626663 DO - https://doi.org/10.1016/j.jcomc.2025.100581 SN - 2666-6820 VL - 17 SP - 1 EP - 9 PB - Elsevier B.V. CY - Amsterdam, Netherlands AN - OPUS4-62666 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wendt, Mario A1 - Krebber, Katerina A1 - Glötzl, R. ED - Boller, C. T1 - Development of a PMMA-POF based fiber optic inclinometer with smart transport and installation characteristics N2 - We present the state of our work concerning the development of a fiber optic inclinometer based on PMMA POF which provides distributed sensitivity regarding level, direction and location of deformation within critical ground structures. According to the demand for simple less expensive Installation and Operation of reliable sensor Systems a sensor concept has been developed and to our knowledge the first results of a PMMA POF based inclinometer prototype are presented in the following chapters. T2 - EWSHM'12 - 6th European workshop on structural health monitoring 2012 CY - Dresden, Germany DA - 03.07.2012 PY - 2012 SN - 978-3-940283-41-2 IS - Chapt. Optical Sensors SP - 411 EP - 416 CY - Berlin AN - OPUS4-26193 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wendt, Mario A1 - Krebber, Katerina T1 - Using optical POF switches for distributed fiber optical strain measurements N2 - During recent research projects FOS sensor Systems based on PMMA (see fig.l) and perfluorined POF have been developed in order to observe critical earth structures [1,2], The sensor Systems enables real distributed Observation of objects due to the use of OTDR technique, whereas an increased Rayleigh backscatter level is observed at the strained fiber section. Fürther both used POF types are very robust which makes the sensor System suitable for harsh environment condilions and secure continuous measurements even within strong deformed structures. These characteristics offer opportunities to complement the arsenal of established electric based sensor Systems. However, due to high cost of OTDR devices the developed sensor System is not ready for the market yet. To make an improvement here the feasibility of optical switches have been investigated in order to use multiple single sensor lines connected to one OTDR device. Despite to the fact that optical switches are established in the field of telecommunication the use for distributed optical measurements is to our knowledge not investigated yet. One question which has to be answered is if strong reflections which occur at fiber couplings disable the Signals of the single sensor lines. A further interest is to secure that the known sensing characteristics of the single System is still provided via optical switch. For this purpose two optical switches each adapted to PMMA and perfluorined characteristics respectively have been tested. Laboratory tests have been conducted, whereas two OTDR units for PMMA and perfluorined POF were available. Finally the switches have been tested during field tests. T2 - POF 2012 - 21st International conference on plastic optical fibers CY - Atlanta, Georgia, USA DA - 10.09.2012 KW - Distributed strain sensors KW - Optical switch KW - OTDR PY - 2012 SP - 133 EP - 136 AN - OPUS4-26743 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Popiela, Bartosz A1 - Schukar, Marcus A1 - Breithaupt, Mathias A1 - Günzel, Stephan A1 - Mair, Georg W. A1 - Krebber, Katerina A1 - Seidlitz, Holger T1 - Embedding of Fiber Optic Sensors Under Industrial Conditions and Distributed Strain Sensing in Type 4 Composite Pressure Vessels N2 - The number of in-operation composite pressure vessels is increasing, partly due to their attractiveness for on-board compressed gas storage and transport applications. A possible way to maintain the highest safety levels is through the structural health monitoring of the composite cylinders. Here, the use of fiber optic sensors appears to be a promising approach. However, the integration of the optical fibers into the composite structure of a pressure vessel has been shown to be challenging. In this study, insights on the embedding of optical fibers in the composite structure under industrial conditions are provided. A protection concept for the ingress and egress of the optical fibers is presented. Finally, the results from destructive slow burst tests are evaluated, showing no clear trend in the impact of the embedded optical fibers on the performance of composite pressure vessels. T2 - 24th International Conference on Composite Materials CY - Baltimore, Maryland, USA DA - 04.08.2025 KW - Composite KW - Pressure vessel KW - Filament winding KW - Fiber optic sensors PY - 2025 SP - 3710 EP - 3717 AN - OPUS4-63886 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Witt, Jens A1 - Narbonneau, F. A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - De Jonckheere, J. A1 - Jeanne, M. A1 - Kinet, D. A1 - Paquet, B. A1 - Depré, A. A1 - D´Angelo, L.T. A1 - Thiel, T. A1 - Logier, R. T1 - Medical textiles with embedded fiber optic sensors for monitoring of respiratory movement N2 - For patients under Magnetic Resonance Imaging (MRI) spontaneous respiration is constantly at risk of being impaired by anesthetic drugs or by upper airway obstruction. Therefore, continuous monitoring of the breathing activity is needed to assess adequate ventilation or to detect specific obstruction patterns. The paper describes three MRI compatible respiration sensors based on pure optical technologies developed within the EU FP6 project OFSETH. The sensors are based on fiber Bragg gratings, optical time-domain reflectometry and macrobending effects. The developed smart medical textiles can sense elongation up to 3% while maintaining the stretching properties of the textile substrates for patient's comfort. The OFSETH harness allows a continuous measurement of abdominal and thoracic respiration movement while all vitals organs are free for medical staff actions. The sensors were tested in MRI environment and on healthy adults. KW - Fiber optic sensor KW - Polymer optical fiber (POF) sensor KW - Respiratory sensor KW - Smart medical textile KW - MRI KW - Smart textile KW - Healthcare monitoring KW - Optical sensor KW - FBG PY - 2012 DO - https://doi.org/10.1109/JSEN.2011.2158416 SN - 1530-437X SN - 1558-1748 VL - 12 IS - 1 SP - 246 EP - 254 CY - New York, NY, USA AN - OPUS4-25649 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Witt, Jens A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - Demuth, J. A1 - Pazoutová, H. A1 - Sasek, L. A1 - Santostefano, N. A1 - Fiore, L. A1 - Uotila, J. A1 - Pietrowski, P. T1 - POF sensors for personal protective equipment (PPE) N2 - This paper reports about the EU project i-Protect in which fibre optic sensors for measuring heart rate, respiratory rate and skin temperature are being developed. The sensors and monitoring units are integrated into underwear and are communicating wireless via body area network and communication unit with the rescue command centre. All sensors can be removed from the underwear to allow washing the textile. T2 - POF 2012 - 21st International conference on plastic optical fibers CY - Atlanta, Georgia, USA DA - 10.09.2012 KW - Physiological sensor KW - Heart rate KW - Respiratory rate KW - Photoplethysmography KW - Technical textile PY - 2012 SP - 333 EP - 338 AN - OPUS4-27397 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hussels, Maria-Teresa A1 - Chruscicki, Sebastian A1 - Habib, Abdel Karim A1 - Krebber, Katerina T1 - Distributed acoustic fibre-optic sensors for condition monitoring of pipelines N2 - Industrial piping systems are particularly relevant to public safety and the continuous availability of infrastructure. However, condition monitoring systems based on many discrete sensors are generally not well-suited for widespread piping systems due to considerable installation effort, while use of distributed fibre-optic sensors would reduce this effort to a minimum. Specifically distributed acoustic sensing (DAS) is employed for detection of third-party threats and leaks in oil and gas pipelines in recent years and can in principle also be applied to industrial plants. Further possible detection routes amenable by DAS that could identify damage prior to emission of medium are subject of a current project at BAM, which aims at qualifying distributed fibre optic methods such as DAS as a means for spatially continuous monitoring of industrial piping systems. Here, first tests on a short pipe are presented, where optical fibres were applied directly to the surface. An artificial signal was used to define suitable parameters of the measurement system and compare different ways of applying the sensor. T2 - Sixth European Workshop on Optical Fibre Sensors CY - Limerick, Ireland DA - 31.05.2016 KW - fibre-optic condition monitoring KW - distributed acoustic sensing (DAS) KW - pipeline monitoring KW - sensor application PY - 2016 SN - 978-1-5106-0219-9 DO - https://doi.org/10.1117/12.2236809 SN - 0277-786X VL - Vol. 9916 SP - Article Number: 99162Y PB - SPIE CY - Bellingham, Washington USA AN - OPUS4-37234 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stajanca, Pavol A1 - Cetinkaya, O. A1 - Schukar, Marcus A1 - Mergo, P. A1 - Webb, D. J. A1 - Krebber, Katerina T1 - Molecular alignment relaxation in polymer optical fibers for sensing applications N2 - A systematic study of annealing behavior of drawn PMMA fibers was performed. Annealing Dynamics were investigated under different environmental conditions by fiber longitudinal shrinkage monitoring. The shrinkage process was found to follow a stretched exponential decay function revealing the heterogeneous nature of the underlying molecular dynamics. The complex dependence of the fiber shrinkage on initial degree of molecular alignment in the fiber, annealing time and temperature was investigated and interpreted. Moreover, humidity was shown to have a profound effect on the annealing process, which was not recognized previously. Annealing was also shown to have considerable effect on the fiber mechanical properties associated with the relaxation of molecular alignment in the fiber. The consequences of fiber annealing for the climatic stability of certain polymer optical fiber-based sensors are discussed, emphasizing the importance of fiber controlled pre-annealing with respect to the foreseeable operating conditions. KW - Polymer optical fibers KW - Optical fiber sensor climatic stability KW - Thermal annealing KW - Molecular alignment relaxation KW - Humidity induced annealing PY - 2016 DO - https://doi.org/10.1016/j.yofte.2015.12.006 SN - 1068-5200 VL - 28 SP - 11 EP - 17 PB - Academic Press CY - Orlando AN - OPUS4-35288 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stajanca, Pavol A1 - Sporea, D. A1 - Mihai, L. A1 - Negut, D. A1 - Schukar, Marcus A1 - Krebber, Katerina ED - Bunge, C.-A. ED - Kruglov, R. T1 - Gamma radiation induced effects in perfluorinated polymer optical fibers for sensing applications N2 - Radiation induced attenuation in perfluorinated polymer optical fiber was investigated as a potential mean for online. in situ gamma radiation monitoring. Spectral dependence of radiation induced attenuation was measured in the visible and near infrared range. Attenuation spectrum exhibits sharp increase both towards the ultraviolet and infrared side of the spectrum with 3 distinct peaks around 1400 nm. The fiber sensitivity to gamma radiation was further evaluated at two commonly used IR wavelengths (1310nm and l550nm} by pre- and post-irradiation optical time-domain reflectometry measurements. The examined fiber is sensitive up to lOO kGy of total absorbed dose with only minor saturation towards the large dose values. The influence of gamma radiation on the fiber mechanical properties was studied as well. Up to the maximal dose of 100 kGy, no significant deterioration of fiber strength and elasticity was observed. T2 - 3rd International POF Modelling Workshop CY - Nuremberg, Germany DA - 21.09.2015 KW - Perfluorinated POF KW - Gamma radiation KW - Radiation induced losses KW - Radiation dosimetry PY - 2015 SN - 978-3739214993 SP - 95 EP - 103 PB - Books on Demand GmbH CY - Norderstedt AN - OPUS4-35287 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stajanca, Pavol A1 - Lacraz, A. A1 - Kalli, K. A1 - Schukar, Marcus A1 - Krebber, Katerina ED - Berghmans, F. ED - Mignani, A. G. T1 - Strain sensing with femtosecond inscribed FBGs in perfluorinated polymer optical fibers N2 - In this work, the potential of fiber Bragg gratings (FBGs) in low-loss perfluorinated polymer optical fibers (PF-POFs) is explored. The FBG is femtosecond-inscribed in a commercial multi-mode (MM) PF-POF based on Cytop® polymer. Femtosecond inscription leads to creation of a highly saturated grating with a number of higher order reflection Peaks visible throughout the visible and near-infrared spectral region. For 2 mm long FBG having a pitch of 2.2895 μm, a total of nine higher-order MM reflection bands are visible spanning from 1548 nm (4th order) to 520 nm (12th order). Strain sensitivity was measured for 6 peak bands in 500-900 nm region, where relatively low cost CCD based spectrometers and broadband LEDs are available. Strain sensitivity increases almost linearly with increasing initial peak wavelength, growing from 4.82 ± 0.02 nm/% measured for 12th order peak at 517 nm to 8.12 ± 0.04 nm/% measured for 7th order peak at 883 nm. These values correspond to roughly 20 % higher sensitivity than silica FBGs exhibit in this spectral range. The gratings in PF-POFs combine the higher strain sensitivity and low-loss operation while maintaining the mechanical advantages of polymer optical fibers. Therefore, they hold a high potential for considerable broadening of polymer optical fiber Bragg gratings application range. T2 - Photonics Europe 2016, Optical Sensing and Detection IV CY - Brussels, Belgium DA - 03.04.2016 KW - Fiber Bragg gratings KW - Fiber optics sensors KW - Perfluorinated polymer optical fiber KW - Cytop KW - Strain sensitivity PY - 2016 SN - 978-1-5106-0144-4 DO - https://doi.org/10.1117/12.2225081 SN - 0277-786X VL - 9899 SP - 989911-1 EP - 989911-7 PB - SPIE AN - OPUS4-35926 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lu, Xin A1 - Chruscicki, Sebastian A1 - Schukar, Marcus A1 - Münzenberger, Sven A1 - Krebber, Katerina T1 - Application of Intensity-Based Coherent Optical Time Domain Reflectometry to Bridge Monitoring N2 - Although distributed fiber sensing techniques have been widely used in structural health monitoring, the measurement results of bridge monitoring, particularly under destructive testing, have rarely been reported. To the best of our knowledge, this paper is the first report of distributed vibration measurement results, which we obtained during a three-day destructive test on an abolished bridge. A coherent optical time domain reflectometry (COTDR) was used to acquire the vibration information while the bridge was being sawed. The obtained signal was analyzed in time and frequency domain. Some characteristics of the sawing-induced vibration were retrieved by the short-time Fourier transform; the vibration exhibited several high frequency components within the measured range up to 20 kHz and all the components appeared in the same time slot. Some unexpected signals were also detected. Thorough analysis showed that they are quite different from the sawing-induced vibration and are believed to originate from internal damage to the bridge (probably the occurrence of cracks). KW - Destructive testing KW - Structural health monitoring KW - Distributed fiber sensing KW - Distributed acoustic sensing PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-547451 DO - https://doi.org/10.3390/s22093434 VL - 22 IS - 9 SP - 3434 PB - MDPI AN - OPUS4-54745 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kinet, D. A1 - Witt, Jens A1 - Grillet, A. A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - Giannone, D. A1 - Pirotte, F. T1 - Silica Fibre Bragg Grating Sensor Embedded into a Textile Fabric for Large Strain Applications N2 - A FBG written on standard silica fibre, with coating transparent at 248nm, was integrated on an elastic textile fabric. The so-formed optical gauge showed a linear relationship when strained up to 40%. T2 - Bragg Gratings, Photosensitivity and Poling in Glass Waveguides (BGPP) and Nonlinear Photonics (NP) Topical Meeting and Tabletop Exhibit 2007 CY - Quebec City, Quebec, Canada DA - 2007-09-02 KW - Silica Fibre KW - Fibre Bragg Grating KW - Fibre Optic Sensor KW - Strain Sensor KW - FBG KW - Textile Fabric KW - Large Strain Application PY - 2007 SN - 1-55752-847-0 SP - 1 EP - 3 AN - OPUS4-16008 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - Scheer, M. ED - Gerald Gerlach, ED - Peter Hauptmann, T1 - Faser-Bragg-Gitter-Sensoren überwachen Strahlung am Elektronenspeicherring BESSY II T2 - 8. Dresdner Sensor-Symposium CY - Dresden, Deutschland DA - 2007-12-10 KW - Faser-Bragg-Gitter KW - Fasersensoren KW - Strahlungssensoren KW - Strahlungseffekte KW - Strahlungsdosimetrie KW - Elektronenspeicherring PY - 2007 SN - 978-3-940046-45-1 N1 - Serientitel: Dresdner Beiträge zur Sensorik – Series title: Dresdner Beiträge zur Sensorik IS - 29 SP - 141 EP - 144 PB - TUDpress, Verlag der Wissenschaften GmbH CY - Dresden AN - OPUS4-16375 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Grillet, A. A1 - Kinet, D. A1 - Witt, Jens A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - Pirotte, F. A1 - Depré, A. T1 - Optical Fiber Sensors Embedded Into Medical Textiles for Healthcare Monitoring N2 - The potential impact of optical fiber sensors embedded into medical textiles for the monitoring of respiratory movements in a magnetic resonance imaging environment is presented. We report on three different designs, all textile based: a macrobending sensor, a Bragg grating sensor, and a time reflectometry sensor. In all three cases, the sensing principle is based on the measure of the elongation of the abdominal circumference during breathing movements. We demonstrate that the three sensors can successfully sense textile elongations between 0% and 3%, while maintaining the stretching properties of the textile substrates for a good comfort of the patients. KW - Fiber Bragg grating KW - Fiber-optic sensor KW - Mac-robending sensor KW - Medical textile KW - Medical resonance imaging (MRI) KW - Polymer fiber (POF) optical time domain reflectometry (OTDR) sensor PY - 2008 DO - https://doi.org/10.1109/JSEN.2008.926518 SN - 1530-437X SN - 1558-1748 VL - 8 IS - 7 SP - 1215 EP - 1222 CY - New York, NY, USA AN - OPUS4-17799 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - Scheer, M. T1 - Strahlungsüberwachung mit Faser-Bragg-Gitter-Sensoren am Elektronenspeicherring BESSY II N2 - Die Eignung von Faser-Bragg-Gitter-(FBG)-Sensoren zur Messung ionisierender Strahlung wurde an einem Undulator des Elektronenspeicherrings BESSY II untersucht. Über einen Zeitraum von 20 Wochen wurde eine durch Strahlung verursachte Bragg-Wellenlängenänderung der FBG-Sensoren von 25pm gemessen, was einer Strahlendosis von 720 Gy entspricht. The suitability of using fiber Bragg grating (FBG) sensors for the measurement of ionizing radiation on the electron storage ring BESSY II by measuring the Bragg wavelength shift caused by radiation was investigated. During a time period of 20 weeks a Bragg wavelength shift of 25pm caused by the ionizing radiation was measured by FBG sensors at the storage ring. This Bragg wavelength shift corresponds to a radiation dose value of 720 Gy. KW - Faseroptische Sensoren KW - Faser-Bragg-Gitter KW - Dosimetrie KW - Strahlungssensoren KW - Elektronenspeicherring KW - Fiber optic sensors KW - Fiber Bragg gratings KW - Radiation dosimetry KW - Radiation sensors KW - Electron storage ring PY - 2008 DO - https://doi.org/10.1524/teme.2008.0834 SN - 0340-837X SN - 0178-2312 SN - 0171-8096 VL - 75 IS - 4 SP - 245 EP - 250 PB - Oldenbourg CY - München AN - OPUS4-17655 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - Witt, Jens A1 - Schukar, Marcus A1 - Large, M. A1 - Thiel, T. T1 - Technology and Applications of Smart Technical Textiles Based on POF T2 - 17th International Conference on Plastic Optical Fibers (POF 2008), August 25-28, 2008 CY - Santa Clara, California, USA DA - 2008-08-25 KW - Fiber optic sensors KW - Polymer optical fibers (POF) KW - POF sensors KW - Smart technical textiles PY - 2008 SP - 1 EP - 10 AN - OPUS4-17870 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Witt, Jens A1 - Schukar, Marcus A1 - Krebber, Katerina T1 - Polymeroptische Fasersensoren für die Atmungssensorik T2 - 19th International Scientific Conference Mittweida CY - Mittweida, Deutschland DA - 2008-11-05 KW - Faseroptischer Sensor KW - Medizinische Textilien KW - Intelligente Textilien KW - Atmungssensor KW - OTDR KW - POF KW - Mikrostrukturierte POF (mPOF) KW - Langperiodische Gitter (LPG) PY - 2008 SN - 1437-7624 SN - 1430-3698 IS - 5 SP - 21 EP - 25 CY - Mittweida AN - OPUS4-18404 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Witt, Jens A1 - Schukar, Marcus A1 - Krebber, Katerina T1 - Medizinische Textilien mit integrierten polymeroptischen Fasern zur Atmungssensorik KW - Atmungssensor KW - Intelligente Textilien KW - Faseroptischer Sensor KW - POF-Sensor KW - OTDR KW - Respiration sensor KW - Intelligent textile KW - Fiberoptic sensor KW - POF sensor KW - OTDR PY - 2008 DO - https://doi.org/10.1524/teme.2008.0905 SN - 0340-837X SN - 0178-2312 SN - 0171-8096 VL - 75 IS - 12 SP - 1 EP - 8 PB - Oldenbourg CY - München AN - OPUS4-18587 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Steffen, Milan A1 - Schukar, Marcus A1 - Witt, Jens A1 - Krebber, Katerina A1 - Large, M. A1 - Argyros, A. T1 - Investigation of MPOF-LPGs for sensing applications N2 - The versatility of MPOF offers a variety of sensing applications. In this paper the influence of strain, temperature and humidity is investigated. The results show that MPOF LPGs are well suited for strain sensing. Further investigations have to be made to clarify the behaviour on temperature and humidity in more detail. T2 - POF 2009 - 18th International conference on plastic optical fibers CY - Sydney, Australia DA - 2009-09-07 KW - Mikrostrukturierte Polymerfasern (MPOF) KW - Langperiodische Gitter (LPG) KW - Faseroptische Sensorik KW - Dehnungssensor KW - Klimatische Effekte PY - 2009 IS - Session 1 (S1_25) SP - 1 EP - 4 CY - Sydney, Australia AN - OPUS4-19887 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Witt, Jens A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - Jonckheere, J. de A1 - Paquet, B. A1 - Depré, A. T1 - Respiratory sensor based on POF OTDR N2 - We report on the characterization and test of a respiratory sensor based on POF OTDR, developed for monitoring of patients during MRI examination. The sensor is based on an optical fibre integrated into an elastic belt using a macrobending layout. T2 - POF 2009 - 18th International conference on plastic optical fibers CY - Sydney, Australia DA - 2009-09-07 KW - Faseroptischer Sensor KW - Medizinische Textilien KW - Intelligente Textilien KW - Atmungssensor KW - OTDR KW - POF PY - 2009 IS - Session 6 ( S6_74) SP - 1 EP - 4 CY - Sydney, Australia AN - OPUS4-19889 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - Large, M. A1 - Lwin, R. T1 - Climatic investigations of microstructured polymer optical fibers N2 - The behaviour of optical transmission of microstructured polymer optical fibers (MPOFs) by varying temperature and humidity was investigated whereas different MPOFs with varying hole structures and manufacturing procedures were used. T2 - POF 2009 - 18th International conference on plastic optical fibers CY - Sydney, Australia DA - 2009-09-07 KW - Mikrostrukturierte Polymerfasern (MPOF) KW - Klimatische Effekte KW - Faseroptische Sensorik KW - Langperiodische Gitter (LPG) PY - 2009 IS - Session 1 (S1_25) SP - 1 EP - 4 CY - Sydney, Australia AN - OPUS4-19916 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Witt, Jens A1 - Steffen, Milan A1 - Schukar, Marcus A1 - Krebber, Katerina T1 - Investigation of sensing properties of microstructured polymer optical fibres N2 - We investigated sensing properties of single mode poly methyl methacrylate (PMMA) microstructured polymer optical fibres (MPOF) with mechanically imprinted long period gratings (LPG). After preparation of the MPOF end-faces the samples were elongated with silica fibres. These samples were used to measure the influence of strain to the LPG wavelength which showed the viscoelastic nature of PMMA. We also measured the influence of temperature and humidity. The results show that MPOF LPGs are well suited for strain sensing. One MPOF LPG was stitched to a textile. Using this textile we measured a simulated respiratory motion. T2 - Photonics Europe 2010: Nanophotonics and photonics materials CY - Brussels, Belgium DA - 2010-04-12 KW - Microstructured polymer optical fibre KW - Long period grating KW - Strain sensor KW - Humidity sensor KW - Temperature sensor KW - Respiratory sensor PY - 2010 SN - 978-0-8194-8206-8 DO - https://doi.org/10.1117/12.854656 SN - 0277-786X VL - 7714 IS - 7714-12 SP - 77140F-1 - 77140F-12 AN - OPUS4-21740 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - Nöther, Nils A1 - Schukar, Marcus A1 - Wendt, Mario A1 - Witt, Jens A1 - Wosniok, Aleksander T1 - Technology and applications of smart technical textiles based on fibre optic sensors N2 - Technical textiles with embedded fibre optic sensors habe been developed for the purposes of the structural health monitoring in geotechnical and civil engineering as well as for healthcare monitoring in the medical sector. The paper shows selected examples of using such sensor-based smart textiles for different applications. T2 - International conference "Optical sensors" CY - Karlsruhe, Germany DA - 2010-06-21 PY - 2010 IS - STuC2.pdf SP - 1 EP - 2(?) AN - OPUS4-21567 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -