TY - GEN A1 - Perk, M. A1 - Großwig, S. A1 - Pfeiffer, T. A1 - Rembe, M. A1 - den Hartogh, M. A1 - Weege, S. A1 - Krebber, Katerina A1 - Dijk, H. L. T1 - Faseroptische Leckage-Ortung zum Nachweis von Undichtheiten in Bohrlochkomplettierungen N2 - Im Rahmen der Integritätsbe­wertung einer zementierten 13 3/8" Rohrtour einer Sole-Produktionsbohrung wurden erstmals 2018 zeitgleich faserop­tische Temperaturmessungen (DTS) und faseroptische Akustikmessungen (DAS) durchgeführt und ausgewertet. Dazu wurde die Bohrung zeitweise mit Stick­stoff bespannt und wieder entlastet. T2 - DGMK/ÖGEW-Frühjahrstagung 2020 CY - Celle, Germany DA - 15.​04.​2020 KW - Kavernenspeicher KW - Verteilte faseroptische akustische Sensorik KW - Wasserstoffspeicher PY - 2020 N1 - Die DGMK/ÖGEW Frühjahrstagung 2020 wurde abgesagt, der Tagungsband aber trotzdem veröffentlicht. - The DGMK/ÖGEW Frühjahrstagung 2020 was cancelled, the proceedings were published nevertheless. VL - 136 IS - 4 SP - 25 EP - 26 PB - DVV Media Group CY - Hamburg AN - OPUS4-50783 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Krebber, Katerina ED - Karabay, G. ED - Kara, S. T1 - Smart geosynthetics for structural health monitoring using fully distributed fiber optic sensors N2 - We report on the development of a complete system for structural health monitaring of large-scale geotechnical structures. The system uses Brillouin frequency domain analysis (BOFDA) for distributed measurement of strain and temperature along glass optical fibers (GOFs) by determining the so-called Brillouin frequency shift (BFS). ln a number of research activities we managed to optimize the BOFDA measurement setup regarding the spatial resolution and the accuracy of the measured quantities. Moreover, we realized a simultaneaus measurement of strain and temperature by using nonzero dispersion-shifted fibers (NZDSFs) with several multiple Brillouin scattering resonances. ln cooperation with our German and ltalian industry partners we finally succeeded in fabricating low-attenuation smart geosynthetics as a sensor component of a fully distributed Brillouin-based fiber optic monitaring system. T2 - 6th International Technical Textiles Congress CY - Izmir, Turkey DA - 14.10.2015 KW - Brillouin scattering KW - Distributed sensor KW - Fiberoptic sensor KW - Optical fiber KW - Structural health monitoring PY - 2015 SN - 978-975-441-448-6 SP - 215 EP - 218 PB - Meta Basim Pr. AN - OPUS4-34772 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fasano, A. A1 - Woyessa, G. A1 - Stajanca, Pavol A1 - Markos, C. A1 - Stefani, A. A1 - Nielsen, K. A1 - Rasmussen, H. K. A1 - Krebber, Katerina A1 - Bang, O. T1 - Production and characterization of polycarbonate microstructured polymer optical fiber bragg grating sensor N2 - We present the fabrication and characterization of a polycarbonate (PC) microstructured polymer optical fiber (mPOF) and the writing of a fiber Bragg grating (FBG) in it to obtain a polymer optical FBG sen-sor. The manufacturing process of the PC mPOF consists of multiple consecutive stages, such as casting of pol-ymer granulates into a solid rod, machining and drilling of a 3-ring hexagonal lattice of holes into it, and finally drawing into fiber. We demonstrate that the obtained PC mPOF is photosensitive and FBGs can be conveniently inscribed into it, thereby enabling FBG-based temperature and strain sensing. The PC optical fibers are for some applications an attractive alternative to conventional materials used in POF fabrication, such as polymethyl methacrylate (PMMA). In general, PC can be used at temperature up to 120 °C and breaks at considerably higher strains than PMMA. T2 - POF 2015 - 24th International conference on plastic optical fibers CY - Nürnberg, Germany DA - 22.09.2015 PY - 2015 SP - 64 EP - 67 AN - OPUS4-34587 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liehr, Sascha A1 - Burgmeier, J. A1 - Krebber, Katerina T1 - Quasi-distributed fiber bend and temperature measurement in femtosecond laser-structured POF N2 - We propose to use focused femtosecond laser pulses to inscribe Scattering damage in the core of polymer optical fibers for interrogation as quasi-distributed sensor points by optical time domain reflectometry. Fiber bend measurement is demonstrated on off-center inscribed sensor points and absolute temperature measurement is presented by evaluation of the constant backscatter intensities from the inscribed structures relative to temperature-dependent Rayleigh Scattering. Application possibilities and limitations of this new approach are discussed. T2 - POF 2013 - 22nd International conference on plastic optical fibers CY - Búzios, Rio de Janeiro, Brazil DA - 11.09.2013 KW - POF KW - Polymer optical fiber KW - Femtosecond laser KW - Optical fiber sensors KW - OTDR KW - Backscatter measurement PY - 2013 SP - 279 EP - 284 CY - Rio de Janeiro, Brazil AN - OPUS4-30082 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Steffen, Milan A1 - Liehr, Sascha A1 - Basedau, Frank A1 - Krebber, Katerina ED - López-Higuera, J.M. ED - Jones, J. ED - López-Amo, M. ED - Santos, J.L. T1 - Simultaneous vibration and quasi-distributed strain measurement using incoherent OFDR and extrinsic Fabry-Perot interferometers N2 - We present a measurement setup for combined quasi-distributed strain and dynamic point-wise vibration measurement using an incoherent optical frequency domain reflectometry (I-OFDR) setup in combination with extrinsic Fabry-Perot interferometers (EFPIs). Several EFPIs can be multiplexed and at the same time the strain along their supply fibres can be measured in a quasi-distributed manner. The setup is characterised and a demonstration of its general performance is given. T2 - OFS2014 - 23rd International conference on optical fibre sensors CY - Santander, Spain DA - 02.06.2014 KW - Optical fibre sensor KW - EFPI KW - I-OFDR KW - Quasi-distributed KW - Strain KW - Dynamic length and power management PY - 2014 DO - https://doi.org/10.1117/12.2059616 SN - 0277-786X SN - 1996-756X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE VL - 9157 SP - 91576S-1 EP - 91576S-4 AN - OPUS4-31039 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sporea, D. A1 - Mihai, L. A1 - Negut, Daniel A1 - Stajanca, Pavol A1 - Krebber, Katerina ED - Kalli, K. ED - Mendez, A. T1 - On-line monitoring of gamma irradiated perfluorinated polymer optical fiber N2 - In this paper, we present the first results regarding the on-line monitoring of gamma-ray exposure effects on a commercial multi-mode perfluorinated polymer optical fiber (PF-POF), type GigaPOF-50SR from Chromis Fiberoptics. Our focus was to evaluate on-line the radiation induced attenuation (RIA) over a wide spectral range (320 nm – 1700 nm), in order to assess the fiber’s radiation hardness and its possible use in radiation detection. An Ocean Optics QE65000 high sensitivity spectrometer and a StellarNet near-IR spectrometer were used to cover the spectral ranges 200 nm – 1μm and 900 nm – 1.6 μm, respectively. Electron paramagnetic resonance was used to monitor the recovery of the irradiation induced centers at room temperature. The study indicated that the optical fiber can be used as radiation monitor at low dose rates by measuring the attenuation in the UV, while higher dose rates irradiation can be observed by RIA monitoring at specific wavelengths in the visible spectral range. T2 - Photonics Europe 2016, Micro-Structured and Specialty Optical Fibers IV CY - Brussels, Belgium DA - 03.04.2016 KW - electron paramagnetic resonance spectroscopy KW - Perfluorinated polymer optical fiber KW - radiation effects KW - gamma irradiation KW - radiation hardness KW - radiation induced attenuation KW - radiation dosimetry PY - 2016 DO - https://doi.org/10.1117/12.2230688 VL - 9886 SP - 98861Q-1 EP - 98861Q-6 PB - SPIE CY - Bellingham, USA AN - OPUS4-35927 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fasano, A. A1 - Woyessa, G. A1 - Stajanca, Pavol A1 - Markos, C. A1 - Stefani, A. A1 - Nielsen, K. A1 - Rasmussen, H. K. A1 - Krebber, Katerina A1 - Bang, O. ED - Kalli, K. ED - Mendez, A. T1 - Creation of a microstructured polymer optical fiber with UV Bragg grating inscription for the detection of extensions at temperatures up to 125°C N2 - We describe the fabrication of a polycarbonate (PC) micro-structured polymer optical fiber (mPOF) and the writing of fiber Bragg gratings (FBGs) in it to enable strain and temperature measurements. We demonstrate the photosensitivity of a dopant-free PC fiber by grating inscription using a UV laser. We further show that PC Bragg gratings can be extended up to at least 3% without affecting the initial functionality of the micro-structured fiber. The response of PC FBGs to temperature up to 125°C is also investigated. Polycarbonate has good mechanical properties and its high temperatureresistance might extend the range of application of polymeric FBGs. T2 - Photonics Europe 2016, Micro-Structured and Specialty Optical Fibres IV CY - Brussels, Belgium DA - 03.04.2016 KW - fiber Bragg gratings KW - Polycarbonate KW - polymers KW - micro-structured polymer optical fibers KW - UV laser inscription KW - optical fiber sensors PY - 2016 DO - https://doi.org/10.1117/12.2227843 VL - 9886 SP - 988619-1 EP - 988619-6 PB - SPIE AN - OPUS4-35928 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rohwetter, Philipp A1 - Eisermann, René A1 - Krebber, Katerina T1 - Random quadrature demodulation for direct detection single-pulse rayleigh C-OTDR N2 - We present a demodulation method that partially compensates for the nonlinear and random transfer function of fiber-optic direct detection coherent Rayleigh optical time-domain reflectometry (C-OTDR). Specifically, the proposed method is shown to improve the detection of small amplitude, high frequency dynamic optical fiber strain as it occurs in acoustic emission sensing. The method is applicable provided that the dynamic fiber strain to be sensed is known to affect a longer section of sensing fiber in a spatially homogeneous way. It is shown that this knowledge can be used to extract more quantitative information from the measured C-OTDR signal by averaging signal components from the affected fiber section in a suitable and efficient way. The theoretical basis of the method is developed and supporting experimental results are presented. KW - Optical fiber sensors KW - Coherent optical time-domain reflectometry (C-OTDR) KW - Fiber-optic speckle interferometry KW - Remote acoustic emission sensing PY - 2016 DO - https://doi.org/10.1109/JLT.2016.2557586 SN - 0733-8724 VL - 34 IS - 19 SP - 4437 EP - 4444 PB - IEEE CY - Piscataway, NJ, USA AN - OPUS4-35948 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stajanca, Pavol A1 - Mihai, L. A1 - Sporea, D. A1 - Negut, D. A1 - Krebber, Katerina ED - Lewis, E. T1 - Perfluorinated polymer optical fiber for gamma radiation monitoring N2 - The sensitivity of low-loss perfluorinated polymer optical fiber (PF-POF) to gamma radiation is investigated for on-line radiation monitoring purposes. The radiation-induced attenuation (RIA) of a commercial PF-POF based on Cytop material is measured in the visible spectral region. The fiber RIA shows strong wavelength dependence with rapid increase towards the blue side of the spectrum. The wide range of radiation sensitivities is available via careful selection of appropriate monitoring wavelength. The accessible sensitivities span from 1.6 ± 0.2 dBm-1/kGy measured at 750 nm to 18.3 ± 0.7 dBm-1/kGy measured at 420 nm. The fairly high radiation sensitivity as well as its wide tunability makes the fiber a promising candidate for a broad range of applications. T2 - Sixth European Workshop on Optical Fibre Sensors CY - Limerick, Ireland DA - 31.05.2016 KW - Perfluorinated polymer optical fiber KW - Cytop KW - gamma radiation KW - optical fiber sensors KW - radiation dosimetry PY - 2016 UR - http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=2525047&resultClick=1 DO - https://doi.org/10.1117/12.2235528 VL - 9916 SP - 99160H-1 EP - 99160H-4 PB - SPIE CY - Bellingham, WA, USA AN - OPUS4-36461 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lu, Xin A1 - Krebber, Katerina T1 - Direct detection based φOTDR using the Kramers-Kronig receiver N2 - A Kramers-Kronig (KK) receiver is applied to a phase-sensitive optical time domain reflectometry based on direct detection. An imbalanced Mach-Zehnder interferometer with a 2× 2 coupler is used in sensing system to encode the phase information into optical intensity. The directly obtained signal is treated as the in-phase component, and the KK receiver provides the quadrature component by Hilbert transform of the obtained signal, so that the optical phase can be retrieved by IQ demodulation. The working principle is well explained, and the obtained phase variance is theoretically analyzed. The experiment demonstrates the functionality of the sensor and validates the theoretical analysis. KW - Kramers-Kronig detector KW - Distributed fiber sensing KW - Acoustic sensing PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-516803 UR - https://www.osapublishing.org/oe/fulltext.cfm?uri=oe-28-24-37058&id=442839 DO - https://doi.org/10.1364/OE.405723 VL - 28 IS - 24 SP - 37058 EP - 37068 PB - Optical Society of America AN - OPUS4-51680 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Perk, M. A1 - Großwig, S. A1 - Pfeiffer, T. A1 - Rembe, M. A1 - den Hartogh, M. A1 - Weege, S. A1 - Krebber, Katerina A1 - Dijk, H. L. T1 - Faseroptische Leckage-Ortung zum Nachweis von Undichtheiten in Bohrlochkomplettierungen N2 - Im Rahmen der Integritätsbewertung einer zementierten 13 3/8" Rohrtour einer Sole-Produktionsbohrung wurden erstmals 2018 zeitgleich faseroptische Temperaturmessungen (DTS, Distributed Temperature Sensing) und faseroptische Akustikmessungen (DAS, Distributed Acoustic Sensing) durchgeführt und ausgewertet. Dazu wurde die Bohrung zeitweise mit Stickstoff bespannt und wieder entlastet. Durch die Bespannung der Bohrung mit Stickstoff in Kombination mit dem Herunterdrücken des Stickstoff-Sole-Spiegels unter den Rohrschuh der 13 3/8" Rohrtour, konnte Stickstoff aus der Kavernenbohrung durch eine Leckagestelle in die Zementation übertreten und dort ein Stickstoff-Reservoir bilden. Bei der anschließenden Stickstoffentlastung erfolgte der Wiederanstieg des Stickstoff-Sole-Spiegels deutlich schneller als die Entleerung des in der Zementation angelegten Stickstoff-Reservoirs. Der dadurch entstandene Druckgradient hatte zur Folge, dass an der Leckagestelle der Stickstoff aus der Zementation in die aufsteigende Sole in Form von Bläschen eingetreten und dort aufgestiegen ist. Dieser Übertritt der Stickstoffbläschen war sowohl mit der Entstehung eines akustischen Geräusches als auch mit einer Temperaturänderung verbunden, welche mit der DAS- und DTS-Technik nachgewiesen werden konnten. Um die Ergebnisse bzgl. ihres physikalischen Hintergrundes zu überprüfen und basierend auf einer mathematisch-physikalischen Grundlage eine nachvollziehbare Interpretation der Messergebnisse zu ermöglichen, wurde ein numerisches Simulationsmodell der gekoppelten Festkörper- und Druckakustik für die Bohrung aufgebaut. Das Modell berücksichtigt die Geologie und die Komplettierung der Kavernenbohrung. Nach Identifikation der Schallquelle konnte mit dem Modell die Ausbreitung des Schalldrucks in der Bohrung erfolgreich nachgestellt werden. Um dieses Verfahren einer simultanen DAS-DTS-Messung in eine feldtaugliche Version zu überführen, läuft seit November 2019 ein breit angelegtes und vom BMWi gefördertes ZIM-Kooperationsprojekt zwischen der Bundesanstalt für Materialforschung und -prüfung (BAM), der IAB Weimar gGmbH, der GESO GmbH & Co. Projekt KG, der DEEP.KBB GmbH sowie der Rembe Consulting PartG mbB. Durch die Messdatenkopplung und den Wegfall der bewegungsbedingten Nachteile einer Messsonde werden präzisere Ergebnisse zur Bewertung der Bohrlochintegrität erwartet. Das Ziel ist, mit Hilfe der noch zu entwickelnden einfachen und robusten Technik, quantitative Aussagen über die Zustände im verrohrten Bohrloch direkt am Messplatz treffen zu können, wobei ein Fokus auf Detektierung und Quantifizierung von Kleinstleckagen liegt. Im Rahmen dieses Forschungsprojektes kommt neben numerischen Berechnungen auch ein geplanter Bohrlochsimulator zum Einsatz, mit dem umfangreiche Untersuchungen zur Ermittlung der Grenzparameter und Detektionsschwellen durchgeführt werden sollen. T2 - DGMK/ÖGEW-Frühjahrstagung 2020 CY - Celle, Germany DA - 15.​04.​2020 KW - Kavernenspeicher KW - Verteilte faseroptische akustische Sensorik KW - Wasserstoffspeicher PY - 2020 UR - https://dgmk.egnyte.com/fl/k3KJMqKMSb#folder-link/ SN - 978-3-947716-04-3 SN - 1433-9013 N1 - Die DGMK/ÖGEW Frühjahrstagung 2020 wurde abgesagt, der Tagungsband aber trotzdem veröffentlicht. - The DGMK/ÖGEW Frühjahrstagung 2020 was cancelled, the proceedings were published nevertheless. VL - DGMK-Tagungsbericht 2020-1 SP - 106 EP - 121 PB - DGMK - Deutsche Wissenschaftliche Gesellschaft für Erdöl, Erdgas und Kohle CY - Hamburg AN - OPUS4-52159 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lu, Xin A1 - Krebber, Katerina T1 - Characterizing detection noise in phase-sensitive optical time domain reflectometry N2 - Phase-sensitive optical time domain reflectometry (φOTDR) is an excellent distributed fiber sensing technique and has been applied in various areas. Its noise is however never been comprehensively studied to the best of our knowledge. The different detection noise sources in such a sensing system are thoroughly investigated. The impacts of thermal noise, shot noise and the beat between signal and the amplified spontaneous emission from a pre-amplifier have been theoretically and experimentally demonstrated. Due to the random nature of the φOTDR signal, the detection noise demonstrates distinct features at different fiber positions in a single measurement. The theoretical analysis and the experimental result explicitly affirm most of the fiber sections, and the difference at some positions may be explained by ambient noise. KW - Noise analysis KW - Acoustic sensing KW - Distributed fiber sensing PY - 2021 DO - https://doi.org/https://doi.org/10.1364/OE.424410 SN - 1094-4087 VL - 29 IS - 12 SP - 18791 EP - 18806 PB - Optical Society of America CY - Washington, DC AN - OPUS4-52757 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Faseroptische Strahlungssensoren für kerntechnische Anwendungen N2 - Der Anstieg der Vielfalt nuklearer Anwendungen weit über die Bereiche der kerntechnischen Stromerzeugung erhöht die Relevanz der Entwicklung und Anwendung neuer Technologien zur Strahlungsüberwachung. Auch die offenen Sicherheitsfragen bei der Entsorgung radioaktiver Abfälle einschließlich Zwischen- und Endlagerungsproblematik verstärkt die Nachfrage nach effizienten Monitoringsystemen zum Schutz von Mensch und Umwelt vor ionisierender Strahlung. Aufgrund ihrer messtechnisch vorteilhaften Materialeigenschaften stellen die faseroptischen Strahlungssensoren eine vielversprechende Alternative zu traditionellen Dosimetern dar. Bedingt durch ihre kleinen Abmessungen, elektromagnetische Unempfindlichkeit und ihr geringes Gewicht können faseroptische Sensoren in einer harschen Umgebung an schwer zugänglichen Stellen eingesetzt werden. Darüber hinaus bietet diese Art der Sensoren die Möglichkeit der ortsverteilten Messung entlang der gesamten Sensorfaser. Somit kann durch eine einzelne optische Faser eine Vielzahl an punktuell messenden Sensoren ersetzt werden. Dieser Beitrag beschreibt die in der BAM vorangetriebenen Entwicklungen unterschiedlicher Sensorprinzipien, -lösungen und -verfahren zur Detektion ionisierender Strahlung. T2 - 2. Tage der Standortauswahl CY - Online meeting DA - 11.02.2021 KW - Faseroptischer Strahlungssensor KW - Ortsauflösende Fasersensorik KW - Strahlungsinduzierte optische Dämpfung KW - Gammastrahlung KW - Rayleigh-Streuung KW - Brillouin-Streuung PY - 2021 SP - 43 AN - OPUS4-52211 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella A1 - Krebber, Katerina T1 - Fiber Optic Sensors for SHM - From Laboratory to Industrial N2 - The paper highlights the research activities in Germany and Europe in the development of distributed fiber optic sensor for structural health monitoring (SHM) like the monitoring of geotechnical and civil infrastructures and presents selected results achieved within these projects. T2 - Conaendi & IEV 2021 CY - Online meeting DA - 09.03.2021 KW - Fiber KW - Optic KW - SHM PY - 2021 AN - OPUS4-52254 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Distributed fiber optic radiation sensors N2 - In this work, we present our results achieved in several research activities for development of distributed fiber optic radiation sensors using glass and polymer optical fibers. The findings show that both the measurement of the radiation-induced attenuation (RIA) along the entire sensing fiber and the accompanying change in the refractive index of the fiber core can be used for distributed radiation monitoring. T2 - safeND CY - Online meeting DA - 10.11.2021 KW - Distributed fiber optic radiation sensors KW - Radiation-induced attenuation KW - Optical fiber sensor KW - Incoherent optical frequency domain reflectometry PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-537531 DO - https://doi.org/10.5194/sand-1-15-2021 VL - 1 SP - 15 EP - 16 AN - OPUS4-53753 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lu, Xin A1 - Krebber, Katerina T1 - Phase error analysis and unwrapping error suppression in phase-sensitive optical time domain reflectometry N2 - Phase-sensitive optical time domain reflectometry becomes an effective tool to realize distributed sensing, and the optical phase of the received light is usually used to quantify the strain for both dynamic and static measurement. The analysis on the overall phase error has been improved by considering the proportionality of the detection noise to the local optical power. The estimation accuracy is greatly improved by using the proposed theory, the probability density of the estimation accuracy over 99% is > 0.6, ∼39 times larger than the previously reported method. The phase unwrapping may malfunction due to the noisy signal, causing large phase errors. Point break detection algorithms are used to locate the incorrect phase unwrapping points, so the temporal evolution of the phase retrieved at each position can be divided into several sections with different offset. The phase unwrapping error is then suppressed by removing the offset. KW - Phase unwrapping KW - Distributed fiber sensing KW - Acoustic sensing PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-543919 DO - https://doi.org/10.1364/OE.446517 VL - 30 IS - 5 SP - 6934 EP - 6948 PB - Optica Publishing Group AN - OPUS4-54391 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Hicke, Konstantin A1 - Krebber, Katerina T1 - Dual functionality of wavelength scanning coherent optical time domain reflectometer N2 - Wavelength scanning coherent optical time domain reflectometer (WS-COTDR) is a good candidate to spatially resolve the environmental information at comparatively low frequency. This paper reveals it can also work as a traditional optical time domain reflectometer (OTDR) to identify Fresnel reflection by averaging the obtained signal over the wavelength scanning range. Simultaneous distributed vibration sensing and a traditional OTDR measurement are experimentally demonstrated using the WS-COTDR system. T2 - European Workshop on Optical Fibre Sensors (EWOFS 2023) CY - Mons, Belgium DA - 23.05.2023 KW - Structural health monitoring KW - Distributed fiber sensing KW - Acoustic sensing PY - 2023 DO - https://doi.org/10.1117/12.2678098 VL - 12643 SP - 1 EP - 4 PB - SPEI AN - OPUS4-57590 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Hicke, Konstantin A1 - Krebber, Katerina T1 - Dual-functionality of WS-COTDR for ground movement monitoring N2 - Wavelength scanning coherent optical time domain reflectometer (WS-COTDR) is a good candidate to spatially resolve the environmental information at comparatively low frequency. This paper reveals it can also work as a traditional optical time domain reflectometer (OTDR) to identify Fresnel reflection by averaging the obtained signal over the wavelength scanning range. Simultaneous distributed vibration sensing and a traditional OTDR measurement are experimentally demonstrated using the WS-COTDR system. T2 - European Workshop on Optical Fibre Sensors (EWOFS 2023) CY - Mons, Belgium DA - 23.05.2023 KW - Distributed fiber sensing KW - Acoustic sensing KW - Structural health monitoring PY - 2023 AN - OPUS4-57591 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Shaheen, Sabahat A1 - Hicke, Konstantin A1 - Krebber, Katerina T1 - phi-g OTDR utilizing geometric phase N2 - Geometric phase measured per beat period in a ϕ-OTDR based on coherent heterodyne detection is used to measure strain. Proposed method is robust to polarisation mismatch fading as a polarisation mismatch between interfering beams is not a hindrance to the measurement of the geometric phase. The Geometric phase is a function of the intensities of the interfering beams as well as the envelope of the beat signal. Its calculation does not require phase unwrapping and accordingly does not suffer the phase unwrapping errors. It is required to be equated with the traditionally measured phase by applying a scaling factor. The spatial resolution of the measured strain is reduced as it is calculated per beat period. Results are verified using a piezo-electric transducer inline a fiber-under-test. T2 - European Workshop on Optical Fibre Sensors (EWOFS 2023) CY - Mons, Belgium DA - 23.05.23 KW - Coherent Heterodyne KW - Geometric Phase KW - Distributed Fiber Optic Sensor PY - 2023 DO - https://doi.org/10.1117/12.2678295 SP - 1 EP - 5 PB - SPIE AN - OPUS4-57551 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Königsbauer, Korbinian A1 - Nöther, N. A1 - Schaller, M. B. A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Distributed POF sensors for structural health monitoring in civil construction applications N2 - In this paper, a cost-efficient distributed fiber optic measurement system based on Rayleigh scattering is presented. The distributed digital incoherent optical frequency domain reflectometry (I-OFDR) method is developed for detection of significantly large strain in the range from 3 % up to 10 % as required by end users. For this purpose, a vector network analyzer used in the I-OFDR is replaced by a compact and cost-effective digital data acquisition system. This digital emitting/receiving unit enables the recording of the complex transfer function carrying information about the local deformations along the entire sensing fiber. T2 - POF 2022 The 30th International Conference on Plastic Optical Fibers CY - Bilbao, Spain DA - 26.09.2022 KW - I-OFDR KW - PF-POF KW - Structural health monitoring KW - Rayleigh backscatter measurement KW - Strain detection PY - 2022 VL - 2022 SP - 152 EP - 155 AN - OPUS4-56060 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Shaheen, Sabahat A1 - Hicke, Konstantin A1 - Krebber, Katerina T1 - Phase-sensitive optical time domain reflectometry based on geometric phase measurement N2 - A phase-sensitive optical time domain reflectometer based on coherent heterodyne detection of geometric phase in the beat signal of light, is reported for the first time to our knowledge. The use of the geometric phase to extract strain makes it immune to polarisation diversity fading. This is because a polarisation mismatch between the interfering beams is not a hindrance to its measurement. The geometric phase is calculated using the amplitude of the beat signal and individual beam intensities without any need for phase unwrapping. It is measured per beat period and can be equated with the traditionally measured dynamic phase with appropriate scaling. The results show that the system based on the geometric phase successfully measures strain, free from polarisation mismatch fading and phase unwrapping errors, providing a completely novel solution to these problems. KW - Fiber optic sensing KW - Distributed acoustic sensing KW - DAS KW - Geometric phase KW - Pancharatnam–Berry phase KW - Berry phase PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-570307 DO - https://doi.org/10.1038/s41598-023-29972-4 VL - 13 SP - 1 EP - 11 PB - Nature Portfolio CY - London AN - OPUS4-57030 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Shaheen, Sabahat A1 - Hicke, Konstantin A1 - Krebber, Katerina T1 - Earth’s near-surface characterisation using phi-OTDR based on geometric phase N2 - Phase-sensitive OTDR based on geometric phase for the first time detects surface waves generated by quarry blasts of 25 kg explosives. Inversion of dispersion curves provides depth profiles of shear-wave velocities of surface waves. T2 - Optica Sensing Congress CY - Munich, Germany DA - 30.07.2023 KW - Geophysics KW - Geometric Phase KW - Distributed Fiber Optic Sensor KW - Coherent Heterodyne KW - Surface waves PY - 2023 SP - 1 EP - 2 AN - OPUS4-58044 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Krebber, Katerina T1 - Novel fading suppression method for distributed optical fiber acoustic sensing N2 - A universal method based on alternating pulse widths is proposed to suppress the signal fading for all distributed acoustic sensors (DASs) and experimentally demonstrated by one DAS system based on a Mach-Zehnder interferometer. T2 - Optica Sensing Congress CY - Munich, Germany DA - 30.07.2023 KW - Distributed fiber sensing KW - Acoustic sensing KW - Fading suppression KW - Structural health monitoring PY - 2023 SP - 1 EP - 2 AN - OPUS4-58048 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Krebber, Katerina T1 - Novel fading suppression method for distributed optical fiber acoustic sensing N2 - A universal method based on alternating pulse widths is proposed to suppress the signal fading for all distributed acoustic sensors (DASs) and experimentally demonstrated by one DAS system based on a Mach-Zehnder interferometer. T2 - Optica Sensing Congress CY - Munich, Germany DA - 30.07.2023 KW - Distributed fiber sensing KW - Acoustic sensing KW - Structural health monitoring KW - Fading suppression PY - 2023 AN - OPUS4-58049 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Shaheen, Sabahat A1 - Hicke, Konstantin A1 - Krebber, Katerina T1 - Blast-Assisted Subsurface Characterisation Using a Novel Distributed Acoustic Sensing Setup Based on Geometric Phases N2 - A novel DAS setup based on geometric phases in coherent heterodyne detection is applied for the first time to the characterisation of the Earth’s subsurface. In addition, an optimisation of the proposed setup in terms of its spatial resolution is also presented for the first time. The surface waves are generated by strong blasts of 25 kg of explosives at a dedicated test site. A 10 km dark fiber link in the vicinity of the test site connected to the test setup records the resulting strain signals. The spike-free and low-noise strain data thus obtained minimize post-processing requirements, making the setup a candidate for real-time seismic monitoring. An analysis of the dispersion characteristics of the generated surface waves is performed using a recently reported optimised seismic interferometric technique. Based on the dispersion characteristics, the shear wave velocities of the surface waves as a function of the depth profile of the Earth’s crust are determined using an optimised evolutionary algorithm. KW - Geophysics KW - Geometric Phase KW - Distributed Fiber Optic Sensor KW - Distributed Acoustic Sensing KW - Earthquake Monitoring KW - Seismology PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-591913 DO - https://doi.org/10.3390/s24010030 VL - 24 IS - 1 SP - 1 EP - 12 PB - MDPI AN - OPUS4-59191 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lu, Xin A1 - Hicke, Konstantin A1 - Krebber, Katerina T1 - Distributed acoustic sensing to monitor ground motion/movement at multi-frequency bands N2 - A novel distributed acoustic sensing technique is proposed that exploits both phase and amplitude of the Rayleigh backscattered light to quantify the environmental variation. The system employs a wavelength-scanning laser and an imbalanced Mach-Zehnder interferometer to acquire the reflection spectra and the phase of the detected light, respectively. Fading-free and low-frequency measurements are realized via the crosscorrelation of the reflection spectra. The discrete crosscorrelation is used to circumvent the nonlinear frequency sweeping of the laser. Based on the phase of the backscattered light, it is possible to quantify fast environmental variations. The whole system requires no hardware modification of the existing system and its functionality is experimentally validated. The proposed system has the potential to monitor ground motion/movement at very low frequency band like subsidence around mining areas and at high frequency band like earthquakes and vibrations induced by avalanches. KW - Distributed acoustic sensing KW - DAS KW - Distributed fiber optic sensing KW - Ground motion detection KW - Subsidence monitoring PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-596129 DO - https://doi.org/10.1109/JLT.2024.3358495 VL - 42 IS - 18 SP - 1 EP - 8 PB - Optical Society und IEEE Photonics Society AN - OPUS4-59612 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Hicke, Konstantin A1 - Krebber, Katerina T1 - Approaching distributed ground motion sensing at high and low frequency ranges N2 - The phase and reflection spectrum of a standard distributed acoustic sensor based on an interferometer are used for fast and slow dynamic measurements, respectively, enabling the system to simultaneously measure various types of ground movement. T2 - 28th International Conference on Optical Fiber Sensors (OFS-28) CY - Hamamatsu, Japan DA - 20.11.2023 KW - Distributed acoustic sensing KW - Ground movement monitoring KW - Geomonitoring KW - Interferometer-based KW - DAS PY - 2023 SP - 1 EP - 4 PB - Optica CY - Washington D.C., USA AN - OPUS4-59098 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Krebber, Katerina T1 - Configuration simplification and data reduction in a DAS system for monitoring large infrastructures N2 - The distributed acoustic sensor based on an imbalanced Mach-Zehnder interferometer with a 3×3 coupler is simplified by using a balanced detector instead of three identical photodetectors. The obtained data is reduced by two third accordingly. T2 - Optica Sensing Congress 2024 CY - Toulouse, France DA - 15.07.2024 KW - Data reduction KW - Distributed fiber optic sensing KW - System simplification PY - 2024 SP - 1 EP - 2 PB - Optica CY - Washington D.C., USA AN - OPUS4-60840 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hicke, Konstantin A1 - Lu, Xin A1 - Chruscicki, Sebastian A1 - Krebber, Katerina T1 - Measurement of Slowly Changing and Quasi-Static Strain Signals for Ground Motion Monitoring Applications using Distributed Acoustic Sensing N2 - The suitability of wavelength-scanning COTDR for distributed dynamic strain sensing (DAS) along buried fiber cables for long-term geotechnical monitoring applications is demonstrated by experiments showing the method’s capability to demodulate slowly varying and quasi-static signals. T2 - Optica Sensing Congress 2024 CY - Toulouse, France DA - 15.07.2024 KW - Ground motion KW - Ground movement monitoring KW - Distributed fiber optic sensing KW - Quasi-static signals KW - Geomonitoring PY - 2024 SP - 1 EP - 2 PB - Optica CY - Washington D.C., USA AN - OPUS4-60816 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zabihi, Mohammadmasoud A1 - Krebber, Katerina T1 - Approach for Faster Signal Processing in Փ-OTDR Systems Based on Directional Measurement of Fiber Slices Interaction N2 - In this study, a signal processing approach for heterodyne Փ-OTDR and C-OTDR systems that can obtain external perturbation and its frequency content in a faster way is proposed. We can detect vibrations with the same or better SNR using this processing approach, only with a single step and fast calculation. Fig. 12 shows the comparison of the normalized measurement time for the gamma matrix method and the conventional method throughout the three experiments. The speed of processing using a gamma matrix is ~35%–50% faster compared to a conventional method in high frequency test (PZT), low frequency test (walking) and street monitoring test. The processing speed in low frequency test is normally a bit lower than the similar high frequency one, since we must use higher number of time frames. Also, in street test we have higher speed because we can select wider gauges. KW - Փ-OTDR PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-560492 DO - https://doi.org/10.1364/OPTCON.456421 VL - 1 IS - 8 SP - 1837 EP - 1847 PB - Optica Publishing Group CY - Washington, DC AN - OPUS4-56049 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zabihi, Mohammadmasoud A1 - Krebber, Katerina T1 - Laser source frequency drift compensation in Φ-OTDR systems using multiple probe frequencies N2 - In this study, an approach for mitigation of LSFD in Φ-OTDR systems was proposed. By using one probe pulse as a reference in a system with two or more probe frequencies, we can remove unwanted low frequency noise that is originally caused by the laser source. Although LSFD is problematic issue, it is not the only source of low frequency noise. Change in temperature, humidity, physical surroundings, environment, etc., can result in such noises. The proposed method; however, is expected to highly suppresses all of these effects, regardless of their source, either in the time or frequency domain. For comparing reference and probe signals, there are sophisticated methods, rather than normal differentiation, available for use. Some of these methods have a close relationship with CPD methods and can further enhance the results. These methods can be further discussed in an independent research or future work. The proposed method is very helpful for increasing accuracy in passive and active seismic monitoring, reservoir monitoring, underwater monitoring, etc. It also helps using relatively simpler laser sources and make the whole system price-efficient, as well as processing data without lengthy compensation algorithms. KW - Frequency Drift KW - Փ-OTDR KW - LSFD PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-560517 DO - https://doi.org/10.1364/oe.460302 SN - 1094-4087 VL - 30 IS - 11 SP - 19990 EP - 19998 PB - Optica CY - Washington, DC AN - OPUS4-56051 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lu, Xin A1 - Krebber, Katerina T1 - Suppression of Rayleigh fading induced errors in φOTDR by different pulse widths for improving the reliability of civil infrastructure monitoring N2 - Rayleigh fading is a widely observed phenomenon in the many fields, such as wireless communication and optical imaging. It is also the main factor limiting the performance of the phase-sensitive optical time domain reflectometry (φOTDR). The low SNR at the fading points results in a large measurement error, severely affecting the reliability of civil infrastructure monitoring. The proposed method involves changing the pulse width during measurements to suppress the impact of fading. Experimental result shows that the number of fading points is greatly reduced by ∼ 96 % and the measurement error is reduced by more than 5 times. Unlike existing methods, this approach requires no hardware modifications, making it applicable to almost all current phase-based φOTDR systems. The versatility and effectiveness of this method make it an excellent candidate for infrastructure monitoring and related fields. KW - Distributed fiber sensing KW - Optical fiber sensing KW - Phase-sensitive optical time domain reflectometry KW - Infrastructure monitoring KW - Rayleigh fading PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-614208 DO - https://doi.org/10.1016/j.optlastec.2024.111927 SN - 1879-2545 VL - 181 SP - 1 EP - 9 PB - Elsevier Ltd. AN - OPUS4-61420 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Hicke, Konstantin A1 - Krebber, Katerina T1 - Distributed fiber optic sensing for monitoring of underground facilities N2 - Distributed fiber optic sensing (DFOS) technique is a promising and robust non-destructive testing tool that can seamlessly acquire environmental conditions over large scales. Therefore, it has found extensive applications in structural health monitoring. Its appeal for monitoring underground facilities lies in the intrinsic properties of the optical fiber, such as immunity to magnetic interference, small size, chemical inertia, etc. This paper provides a concise overview of DFOS applications in underground facility monitoring. Following a brief introduction to the working principle of the DFOS technique, various examples are provided to demonstrate how distributed fiber sensors contribute to monitoring underground facilities. The paper presents unpublished field test results with an emphasis in the energy sector, including monitoring gas storage facilities, geothermal reservoir exploration, and ground movement detection. Furthermore, the paper identifies several directions for enhancing the DFOS system. T2 - SPIE Photonics Europe CY - Strasbourg, France DA - 07.04.2024 KW - Underground gas storage KW - Distributed fiber sensing KW - Geothermal borehole KW - Ground movement KW - Leakage detection KW - Structure health monitoring PY - 2024 AN - OPUS4-60146 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lu, Xin A1 - Hicke, Konstantin A1 - Krebber, Katerina T1 - Distributed fiber optic sensing for monitoring of underground facilities N2 - Distributed fiber optic sensing (DFOS) technique is a promising and robust non-destructive testing tool that can seamlessly acquire environmental conditions over large scales. Therefore, it has found extensive applications in structural health monitoring. Its appeal for monitoring underground facilities lies in the intrinsic properties of the optical fiber, such as immunity to magnetic interference, small size, chemical inertia, etc. This paper provides a concise overview of DFOS applications in underground facility monitoring. Following a brief introduction to the workingbnprinciple of the DFOS technique, various examples are provided to demonstrate how distributed fiber sensors contribute to monitoring underground facilities. The paper presents unpublished field test results with an emphasis in the energy sector, including monitoring gas storage facilities, geothermal reservoir exploration, and ground movement detection. Furthermore, the paper identifies several directions for enhancing the DFOS system. T2 - SPIE Photonics Europe CY - Strasbourg, France DA - 07.04.2024 KW - Structure health monitoring KW - Geothermal borehole KW - Distributed fiber optic sensing KW - Ground movement KW - Leakage detection PY - 2024 DO - https://doi.org/10.1117/12.3023571 SN - 0277-786X VL - 13001 SP - 1 EP - 10 PB - SPIE AN - OPUS4-60384 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Königsbauer, Korbinian A1 - Nöther, Nils A1 - Färber, Jan A1 - Schaller, M.-Barbara A1 - Krebber, Katerina T1 - Distributed polymer optical fiber sensors using digital I-OFDR for geotechnical infrastructure health monitoring N2 - We present a distributed polymer optical fiber sensor system for deformation monitoring of geotechnical infrastructure. The sensor system is based on the digital incoherent optical frequency domain reflectometry (I-OFDR) for the detection of local strain events along a perfluorinated polymer optical fiber (PF-POF) used as a sensing fiber. For the best possible load transfer, the PF-POFs were integrated onto geosynthetics which pose a sensor carrier for the sensing fiber. By using elastic PF-POF instead of a standard glass fiber as a sensing fiber the strain range of geosynthetics-integrated fiber optic sensors could be extended up to 10 % in accordance with the end-user requirements. T2 - 11th European Workshop on Structural Health Monitoring CY - Potsdam, Germany DA - 10.06.2024 KW - Digital I-OFDR KW - Distributed polymer optical fiber sensor KW - Ddistributed strain sensing KW - Smart geosynthetics KW - Structural health monitoring PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-603096 SP - 1 EP - 7 PB - NDT.net AN - OPUS4-60309 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kasinathan, M. A1 - Wosniok, Aleksander A1 - Krebber, Katerina A1 - Babu Rao, C. T1 - Optical fiber defect detection using Brillouin optical time domain analyser N2 - A new technique for optical fiber defect detection using Brillouin distributed fiber optic sensor (DFOS) has been proposed and experimentally demonstrated in this paper. This technique is based on stimulated Brillouin scattering (SBS), which offers three wave interaction in single mode optical fiber (SMF -10 μm/125 μm acrylic coated fiber). The nonlinear effect of SBS is manipulated to locate the defect in optical fiber using distributed sensing technology. Various kind of defects may be present in optical fibers. This paper details a case study on observation of a defect, which manifests its presence in certain temperature values. The detail of defect detection through distributed fiber sensor using the SBS has been brought out. SBS is sensitive to temperature and strain. In order to study the effect of defect in distributed fiber sensor as function of temperature and strain, the distributed pre-strained and unstrained optical fiber is subjected to temperature variation and corresponding measurements are obtained with Brillouin optical time domain analyser (BOTDA). This technique enables the utilization of Brillouin parameters, such as decreased amplitude, frequency and increased linewidth in the defect region of the fiber length. The fiber defect location can be determined with spatial resolution accuracy of less than 50 cm of using BOTDA technique. KW - Stimulated Brillouin scattering KW - Distributed sensor KW - Optical fiber KW - Brillouin Optical Time Domain Analysis PY - 2016 SN - 0019-5596 VL - 54 IS - 9 SP - 565 EP - 570 PB - NISCAIR AN - OPUS4-37914 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kasinathan, M. A1 - Babu Rao, C. A1 - Murali, N. A1 - Jayakumar, T. A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Bond monitoring in temperature dependent applications using Brillouin optical time domain analyser N2 - Adhesive bond has to be evaluated for its integrity over a range of temperature. Adhesive is being used to bond the sensors with structures. There is no validated technique to test its performance. In this paper, we propose a Brillouin Optical Time Domain Analyzer (BOTDA) based methodology to detect temperature-induced adhesive bond failure below room temperature using distributed fiber optic sensor. The differential coefficient of thermal expansion of the structure and fiber sensor can lead to bond failure at low temperature. Optical fiber impregnated in the structure will experience differential temperature/strain due to debond of the adhesive. This leads to the frequency and amplitude decomposition of the Brillouin spectra. This is a good indication for real-time monitoring of the integrity of a bond. KW - Adhesive bond KW - Brillouin scattering KW - optical fiber sensor KW - Brillouin optical time domain analysis KW - distributed sensor PY - 2016 DO - https://doi.org/10.1007/s12596-015-0266-5 VL - 45 IS - 1 SP - 44 EP - 49 PB - Springer AN - OPUS4-37923 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rohwetter, Philipp A1 - Eisermann, René A1 - Großwig, S. A1 - Krebber, Katerina T1 - Fibre-optic distributed acoustic and vibration sensing for monitoring of industrial plants and installations N2 - We propose the application of Distributed Acoustic Sensing (DAS) based on Rayleigh Coherent Optical Time-Domain Reflectometry (C-OTDR) to unconventional sensing tasks in industrial condition monitoring. As examples we present results on the way to fibre-optic remote sensing of dielectric damage processes in high voltage cable joints as well as to condition monitoring of passive rollers in large industrial belt conveyor systems. T2 - International Conference on Smart Infrastructure and Construction CY - Cambridge, UK DA - 27.06.2016 KW - Distributed sensing KW - C-OTDR KW - Strain measurement KW - Structural health monitoring PY - 2016 UR - http://www.icevirtuallibrary.com/doi/abs/10.1680/tfitsi.61279.063 SN - 978-0-7277-6127-9 DO - https://doi.org/10.1680/tfitsi.61279.063 SP - 63 EP - 68 PB - ICE Publishing CY - London, UK AN - OPUS4-38411 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stajanca, Pavol A1 - Krebber, Katerina T1 - Polymer optical fibers for sensing applications: Ionizing radiation monitoring N2 - In the last decades, considerable attention has been paid to the development of polymer optical fibers (POFs) that may in certain cases represent more suitable or cost-effective alternative to their glass-based counterparts. Among other applications, special attention was paid to the utilization of optical fiber sensors in radiation environments. A concept of attenuation-based radiation sensing with perfluorinated POFs is here presented as a potential candidate for low-cost easy-to-use on-line radiation monitoring system. T2 - The Fiber Society 2017 Spring Conference: Next Generation Fibers for Smart Products CY - Aachen, Germany DA - 17.05.2017 KW - Polymer optical fibers KW - Radiation monitoring KW - Cytop PY - 2017 SP - 50 AN - OPUS4-43026 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stajanca, Pavol A1 - Topolniak, Ievgeniia A1 - Pötschke, Samuel A1 - Krebber, Katerina T1 - Solution-mediated cladding doping of commercial polymer optical fibers N2 - Solution doping of commercial polymethyl methacrylate (PMMA) polymer optical fibers (POFs) is presented as a novel approach for preparation of custom cladding-doped POFs (CD-POFs). The presented method is based on a solution-mediated diffusion of dopant molecules into the fiber cladding upon soaking of POFs in a methanol-dopant solution. The method was tested on three different commercial POFs using Rhodamine B as a fluorescent dopant. The dynamics of the diffusion process was studied in order to optimize the doping procedure in terms of selection of the most suitable POF, doping time and conditions. Using the optimized procedure, longer segment of fluorescent CD-POF was prepared and its performance was characterized. Fiber’s potential for sensing and illumination applications was demonstrated and discussed. The proposed method represents a simple and cheap way for fabrication of custom, short to medium length CD-POFs with various dopants. KW - Polymer optical fiber KW - Solution doping KW - Polymethyl methacrylate KW - Rhodamine B KW - Dye-doped fiber KW - Fluorescent optical fiber PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-441045 DO - https://doi.org/10.1016/j.yofte.2018.02.008 SN - 1068-5200 SN - 1095-9912 VL - 41 SP - 227 EP - 234 PB - Elsevier Inc. AN - OPUS4-44104 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schreier, Andy A1 - Wosniok, Aleksander A1 - Liehr, Sascha A1 - Krebber, Katerina T1 - Humidity-induced Brillouin frequency shift in perfluorinated polymer optical fibers N2 - We report, to our knowledge, for the first time on humidity-induced Brillouin frequency shifts in perfluorinated graded index polymer optical fibers. A linear relation between Brillouin frequency shift and humidity was observed. Furthermore, the humidity coefficient of the Brillouin frequency shift is demonstrated to be a function of temperature (-107 to -64 kHz/%r.h. or -426 to -49 kHz m3/g in the range of 20 to 60 °C). An analytical description proves temperature and humidity as two mutually independent effects on the Brillouin frequency shift. KW - Brillouin KW - Polymer optical fibre KW - Humidity PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-457165 DO - https://doi.org/10.1364/OE.26.022307 SN - 1094-4087 VL - 26 IS - 17 SP - 22307 EP - 22314 PB - Optical Society of America AN - OPUS4-45716 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liehr, Sascha A1 - Muanenda, Y. A1 - Münzenberger, Sven A1 - Krebber, Katerina T1 - Wavelength-modulated C-OTDR techniques for distributed dynamic measurement N2 - We present two wavelength-modulated coherent optical time domain reflectometry techniques for dynamic, quantitative and distributed measurement. The robust and simple techniques are based on backscattering correlations along the time axis and along the pulse wavelength shift axis. T2 - 26th International Conference on Optical Fibre Sensors OFS-26 CY - Lausanne, Switzerland DA - 24.09.2018 KW - Fiber optics sensors KW - Optical time domain reflectometry KW - OTDR KW - DAS KW - Distributed strain sensor KW - Rayleigh scattering PY - 2018 DO - https://doi.org/10.1364/OFS.2018.TuE15 SP - 1 EP - 4 AN - OPUS4-46414 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stajanca, Pavol A1 - Topolniak, Ievgeniia A1 - Pötschke, Samuel A1 - Krebber, Katerina ED - Kalli, K. ED - Mendez, A. ED - Bunge, C.-A. T1 - Solution doping of commercial plastic optical fibers N2 - Solution doping of off-the-shelf plastic optical fibers (POFs) represents rather simple and cheap way for preparing custom cladding-doped POFs (CD-POFs) with short to medium lengths. CD-POFs are especially attractive for environmental sensing applications, but might be of interest for illumination task as well. In this work, the proposed doping technique is tested with three different commercial low-cost polymethyl methacrylate (PMMA) POFs; Eska CK-40 and Eska GK-40 from Mitsubishi Rayon and Raytela PGU-FB1000 from Toray. The aim of the work is to aid the selection of the most suitable fiber yielding highest optical quality of prepared CD-POFs. Firstly, the optimal doping times are determined for the individual fiber types using short fiber samples. Secondly, longer 10 m CD-POFs are prepared from all tested fibersusing the optimized doping procedure. Finally, attenuation of pristine POFs and prepared CD-POFs is measured using optical time domain reflectometry in order to characterize the impacts of the doping on fiber optical properties. In addition, the importance of post-doping drying procedure for CD-POF optical performance is investigated as well. The results suggest that, although doping of all tested fibers is generally feasible, Eska CK-40 is the most suitable candidate with regard to the Doping efficiency and fiber post-doping performance. T2 - SPIE Photonics Europe 2018 CY - Strasbourg, France DA - 22.04.2018 KW - Plastic optical fibers KW - Solution doping KW - Polzmethyl methacrylate KW - PMMA KW - Rhodamine B KW - Fluorescent optical fibers KW - Cladding-doped fibers PY - 2018 DO - https://doi.org/10.1117/12.2315619 SN - 0277-786X VL - 10681 SP - 106810O-1 EP - 106810O-7 AN - OPUS4-44907 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kapa, Thomas A1 - Schreier, Andy A1 - Krebber, Katerina T1 - 63 km BOFDA for temperature and strain monitoring N2 - We demonstrate (and are the first to do so) 63 km Brillouin Optical Frequency-Domain Analysis (BOFDA) for temperature and strain monitoring using a 100 km fiber loop. The use of BOFDA for long-range applications can be considered a novel approach, as previous investigations focused on the utilization of Brillouin Optical Time-Domain Reflectometry and Analysis (BOTDR and BOTDA, respectively). At 51.7 km, a 100 m hotspot (37 °C) was detected without using distributed Raman amplification or image processing. KW - Distributed sensing KW - Stimulated Brillouin scattering KW - Fiber optics sensors PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-449679 DO - https://doi.org/10.3390/s18051600 SN - 1424-8220 VL - 18 IS - 5 SP - 1600, 1 EP - 9 PB - MDPI CY - Basel, Switzerland AN - OPUS4-44967 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Liehr, Sascha A1 - Münzenberger, Sven A1 - Krebber, Katerina T1 - Wavelength-scanning coherent OTDR for dynamic high strain resolution sensing N2 - Distributed vibration sensing in optical fibers opened entirely new opportunities and penetrated various sectors from security to seismic monitoring. Here, we demonstrate a most simple and robust approach for dynamic strain measurement using wavelength-scanning coherent optical time domain reflectometry (C-OTDR). Our method is based on laser current modulation and Rayleigh backscatter shift correlation. As opposed to common single-wavelength phase demodulation techniques, also the algebraic sign of the strain change is retrieved. This is crucial for the intended applications in structural health monitoring and modal analysis. A linear strain response down to 47.5 pε and strain noise of 100 pε/√Hz is demonstrated for repetition rates in the kHz range. A field application of a vibrating bridge is presented. Our approach provides a cost-effective high-resolution method for structural vibration analysis and geophysical applications. KW - Fiber optics sensors KW - Optical time domain reflectometry KW - Rayleigh Scattering KW - Distributed acoustic sensing KW - Distributed strain sensing PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-448069 DO - https://doi.org/10.1364/OE.26.010573 SN - 1094-4087 VL - 26 IS - 8 SP - 10573 EP - 10588 PB - Optical Society of America AN - OPUS4-44806 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Smart geosynthetics for structural health monitoring applications N2 - Responding to a growing need for intelligent monitoring of critical geotechnical and civil infrastructures, new multifunctional geotextiles and geogrids with integrated optical fibers were developed and investigated within several research projects. Such smart two-dimensional geosynthetics intercorporating optical fibers as distributed sensors provide solutions both for soil reinforcement, erosion control, drainage or environmental protection and for cost-effective monitoring of critical mechanical deformations and temperature distribution in geotechnical and masonry structures at the same time. The integrated fiber optic sensors provide online information about the condition of the monitored structure and about the occurrence and localization of any damage or degradation for the purpose of preventing a total collapse. T2 - The Fiber Society's Spring 2017 Conference CY - Institut für Textiltechnik der RWTH Aachen, Germany DA - 17.05.2017 KW - Smart geosynthetics KW - Sensor-based geotextiles KW - Fiber optic sensor KW - POF sensor KW - Distributed sensing PY - 2017 SP - 43 AN - OPUS4-42560 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stajanca, Pavol A1 - Krebber, Katerina ED - Nogueira, R. ED - Rocha, A. M. T1 - Polymer optical fibers as radiation sensors? N2 - Application importance of ionizing radiation has been growing steadily over the last decades. Extensive utilization of ionizing radiation generates demand for development of suitable monitoring techniques. Radiation monitoring systems based on optical fibers offer several key advantages such as small footprint, possibility of remote and real-time measurement as well as electromagnetic immunity. In this contribution, we investigate radiation-induced attenuation (RIA)-based sensing with perfluorinated polymer optical fibers (PF-POFs). The RIA response of two commercial PF-POFs is assessed in a low dose region and performance and limitations of the system are discussed. The concept represents a potential high-sensitivity, low-cost and easy-to-use on-line radiation monitoring system with distributed detection capability T2 - 26thth International Conference on Plastic Optical Fibres (POF 2017) CY - Aveiro, Portugal DA - 13.09.2017 KW - Perfluorinated polymer optical fibers KW - Gamma radiation KW - Radiation monitoring KW - Optical fiber sensor PY - 2017 SN - 978-989-97345-2-4 SP - Paper 5, 1 EP - 4 AN - OPUS4-42318 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stajanca, Pavol A1 - Krebber, Katerina ED - Nogueira, R. ED - Rocha, A. M. T1 - Post-fabrication cladding doping of commercial PMMA polymer optical fiber N2 - Possibility of post-fabrication doping of commercial PMMA fibers using well-known solution doping technique is presented. The cladding of 1 mm PMMA fiber is doped with Rhodamine B with the help of methanol-mediated diffusion of the dye molecules into the fiber material. Doping of the fiber core was not possible even at extended doping times. The proposed method represents rather simple and cheap way for preparing custom cladding-doped POFs with high flexibility of dopant choice and fiber length. Produced cladding-doped fibers have potential for various sensing or lighting applications. T2 - 26th International Conference on Plastic Optical Fibres (POF 2017) CY - Aveiro, Portugal DA - 13.09.2017 KW - Polymer optical fibers KW - Fluorescent dyes KW - Solution doping KW - Polymethyl methacrylate PY - 2017 SN - 978-989-97345-2-4 SP - Paper 14, 1 EP - 4 AN - OPUS4-42319 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schreier, Andy A1 - Liehr, Sascha A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Investigation on the influence of humidity on stimulated Brillouin backscattering in perfluorinated polymer optical fibers N2 - In this paper perfluorinated graded-index polymer optical fibers are characterized with respect to the influence of relative humidity changes on spectral transmission absorption and Rayleigh backscattering. The hygroscopic and thermal expansion coefficient of the fiber are determined to be CHE = (7.4 +/- 0.1) 10^-6 %r.h.^-1 and CTE = (22.7 +/- 0.3) 10^-6 K^-1, respectively. The influence of humidity on the Brillouin backscattering power and linewidth are presented for the first time to our knowledge. The Brillouin backscattering power at a pump wavelength of 1319 nm is affected by temperature and humidity. The Brillouin linewidth is observed to be a function of temperature but not of humidity. The strain coefficient of the BFS is determined to be CS = (146.5 +/- 0.9) MHz/% for a wavelength of 1319 nm within a strain range from 0.1 % to 1.5 %. The obtained results demonstrate that the humidity-induced Brillouin frequency shift is predominantly caused by the swelling of the fiber over-cladding that leads to fiber straining. KW - Brillouin KW - Polymer optical fibre KW - Humidity PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-465932 DO - https://doi.org/10.3390/s18113952 SN - 1424-8220 VL - 18 IS - 11 SP - 3952, 1 EP - 12 PB - MDPI CY - Basel, Switzerland AN - OPUS4-46593 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Krebber, Katerina A1 - Glötzl, R. ED - Boller, C. T1 - Temperature-corrected determination of mechanical deformations in geotechnical structures using Brillouin-based fiber optic sensors N2 - Structural Health Monitoring based on distributed Brillouin measuring techniques has been playing bigger and bigger role for applications in large-scale critical structures over the last decade. The Brillouin sensing techniques make use of low-loss single-mode optical fibers as distributed sensors allowing compound strain and temperature profile discrimination along the measured section even over several tens of kilometers. Thereby, the measured Brillouin frequency shift (BFS) features much stronger dependence on the longitudinal strain in the sensor fiber than on the temperature distribution along the fiber optic sensor. By detection of slight structural changes in monitored civil structures, such as dams, pipelines and tunnels, the influence of temperature on the measured BFS cannot be neglected. In simple cases of fiber optic sensors embedded deeply enough into earth structures no significant temperature gradients caused by weather conditions such as sunrays could be observed. The temperature contributes here only to the signal offset and the local mechanical deformations arisen due to soil displacement can be read directly from the distribution of the BFS. Also special cable solutions for separate determination of temperature and strain have been tested by us under field conditions. The use of two separate optical fibers for strain and temperature detection limits the spatial resolution and measurement accuracy in the determination of both physical quantities. In search of the optimal sensory solution for monitoring of mechanical deformations taking into account the temperature component in the measured signal the use of so called nonzero dispersion-shifted fibers has been investigated in several laboratory tests. Due to different doping concentration in the core new resonance acoustic modes can propagate in such optical fibers which results in multipeak structure in the Brillouin gain spectrum (BGS). The appearance of more than one resonance peak in the BGS offers the possibility to realize simultaneous measurement of longitudinal strain and temperature by analysis of applicable BFSs as function of both physical quantities using only one low cost optical fiber. T2 - EWSHM'12 - 6th European workshop on structural health monitoring 2012 CY - Dresden, Germany DA - 03.07.2012 KW - Structural health monitoring KW - Brillouin scattering KW - Distributed sensor PY - 2012 SN - 978-3-940283-41-2 VL - 1 SP - 417 EP - 422 CY - Berlin AN - OPUS4-26311 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Karapanagiotis, Christos A1 - Hicke, Konstantin A1 - Krebber, Katerina T1 - Eine Sammlung durch Maschinelles Lernen unterstützter Verteilter Faseroptischer Sensoren für Infrastrukturmonitoring T1 - A collection of machine learning assisted distributed fiber optic sensors for infrastructure monitoring N2 - In this paper, we present a collection of machine learning assisted distributed fiber optic sensors (DFOS) for applications in the field of infrastructure monitoring. We employ advanced signal processing based on artificial neural networks (ANNs) to enhance the performance of the dynamic DFOS for strain and vibration sensing. Specifically, ANNs in comparison to conventional and computationally expensive correlation and linearization algorithms, deliver lower strain errors and speed up the signal processing allowing real time strain monitoring. Furthermore, convolutional neural networks (CNNs) are used to denoise the dynamic DFOS signal and enable useable sensing lengths of up to 100 km. Applications of the machine learning assisted dynamic DFOS in road traffic and railway infrastructure monitoring are demonstrated. In the field of static DFOS, machine learning is applied to the well-known Brillouin optical frequency domain analysis (BOFDA) system. Specifically, CNN are shown to be very tolerant against noisy spectra and contribute towards significantly shorter measurement times. Furthermore, different machine learning algorithms (linear and polynomial regression, decision trees, ANNs) are applied to solve the well-known problem of cross-sensitivity in cases when temperature and humidity are measured simultaneously. The presented machine learning assisted DFOS can potentially contribute towards enhanced, cost effective and reliable monitoring of infrastructures. N2 - In diesem Beitrag stellen wir eine Sammlung von verteilten faseroptischen Sensoren (DFOS) vor, die mit Hilfe von Maschinellem Lernen arbeiten und für Anwendungen im Bereich der Infrastrukturüberwachung geeignet sind. Wir setzen hierbei fortschrittliche Signalverarbeitung auf der Grundlage Künstlicher Neuronaler Netze ein, um die Leistungsfähigkeit dynamischer DFOS für die Messung von Dehnungen und Vibrationen zu verbessern. Insbesondere Künstliche Neuronale Netze (ANNs) liefern im Vergleich zu konventionellen und rechenintensiven Korrelations- und Linearisierungsalgorithmen geringere Dehnungsfehler und beschleunigen die Signalverarbeitung, so dass eine Dehnungsüberwachung in Echtzeit möglich ist. Darüber hinaus wenden wir Convolutional Neural Networks (CNNs) an, um dynamische DFOS-Signale zu entrauschen und damit nutzbare Messlängen von bis zu 100 km zu ermöglichen. Es werden Anwendungsbeispiele dieser durch Maschinelles Lernen unterstützten dynamischen DFOS in den Bereichen des Straßenverkehrsmonitorings und der Zug- und Gleisüberwachung aufgezeigt. Im Bereich der statischen DFOS wird Maschinelles Lernen auf das Verfahren der Optischen Brillouin-Frequenzbereichsanalyse (BOFDA) angewendet. Insbesondere CNN erweisen sich hier als sehr robust gegenüber verrauschten Spektren und tragen zu deutlich kürzeren Messzeiten bei. Darüber hinaus werden verschiedene Algorithmen des maschinellen Lernens (lineare und polynome Regression, Entscheidungsbäume, ANNs) angewandt, um das bekannte Problem der Querempfindlichkeit bei DFOS in den Fällen zu lösen, in denen Temperatur und Feuchtigkeit gleichzeitig gemessen werden sollen. Die hier vorgestellten, durch Maschinelles Lernen unterstützten, DFOS können zu einer verbesserten, kostengünstigen und zuverlässigen Überwachung von Infrastrukturen beitragen. KW - Artificial neural networks KW - Brillouin sensing KW - Distributed acoustic sensing KW - Fibre optic sensors KW - Infrastructure monitoring PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-569044 DO - https://doi.org/10.1515/teme-2022-0098 SN - 0171-8096 SP - 1 EP - 19 PB - De Gruyter AN - OPUS4-56904 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Karapanagiotis, Christos A1 - Krebber, Katerina T1 - Machine Learning Approaches in Brillouin Distributed Fiber Optic Sensors N2 - This paper presents reported machine learning approaches in the field of Brillouin distributed fiber optic sensors (DFOSs). The increasing popularity of Brillouin DFOSs stems from their capability to continuously monitor temperature and strain along kilometer-long optical fibers, rendering them attractive for industrial applications, such as the structural health monitoring of large civil infrastructures and pipelines. In recent years, machine learning has been integrated into the Brillouin DFOS signal processing, resulting in fast and enhanced temperature, strain, and humidity measurements without increasing the system’s cost. Machine learning has also contributed to enhanced spatial resolution in Brillouin optical time domain analysis (BOTDA) systems and shorter measurement times in Brillouin optical frequency domain analysis (BOFDA) systems. This paper provides an overview of the applied machine learning methodologies in Brillouin DFOSs, as well as future perspectives in this area. KW - Distributed fiber optic sensors KW - BOTDA KW - BOFDA KW - Machine learning KW - Strain and temperature measurements KW - Artificial neural networks PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-580145 DO - https://doi.org/10.3390/s23136187 VL - 23 IS - 13 SP - 1 EP - 26 PB - MDPI AN - OPUS4-58014 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Karapanagiotis, Christos A1 - Hicke, Konstantin A1 - Krebber, Katerina T1 - Machine learning assisted BOFDA for simultaneous temperature and strain sensing in a standard optical fiber N2 - We report, to our knowledge for the first time on simultaneous distributed temperature and strain sensing in a standard telecom optical fiber using a machine learning assisted Brillouin frequency domain analysis (BOFDA) system. The well-known temperature and strain cross-sensitivity problem is addressed by developing a BOFDA system with a high signal-to-noise ratio and applying machine learning. The spectrum consists of four highly resolved peaks, whose Brillouin frequency shifts are extracted and serve as features for the machine learning algorithms. The spectra result from a 450-m standard SMF-28 optical fiber, and particularly from a segment of 30 m. This fiber segment is coiled around a stretcher and placed in a climate chamber. The applied temperature and strain values range from 20 °C to 40 °C and from 0 µɛ to 1380 µɛ, respectively. The total measurement time to achieve a high SNR and resolve four peaks with a spatial resolution of 6 m is 16 min. To discriminate temperature and strain effects, simple frequentist and more sophisticated Bayesian-based algorithms are employed with the powerful Gaussian process regression (GPR) delivering the best performance in terms of temperature and strain errors, which are found to be 2 °C and 45 µɛ, respectively. These errors are calculated using leave-one-out cross-validation, so that an unbiased estimation of the sensor’s performance is provided. KW - Machine learning KW - Brillouin distributed fiber optic sensors KW - Temperature and strain sensing KW - BOFDA PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-569155 DO - https://doi.org/10.1364/OE.480224 SN - 1094-4087 VL - 31 IS - 3 SP - 5027 EP - 5041 PB - OPTICA AN - OPUS4-56915 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Karapanagiotis, Christos A1 - Wosniok, Aleksander A1 - Hicke, Konstantin A1 - Krebber, Katerina T1 - Time-Efficient Convolutional Neural Network-Assisted Brillouin Optical Frequency Domain Analysis N2 - To our knowledge, this is the first report on a machine-learning-assisted Brillouin optical frequency domain analysis (BOFDA) for time-efficient temperature measurements. We propose a convolutional neural network (CNN)-based signal post-processing method that, compared to the conventional Lorentzian curve fitting approach, facilitates temperature extraction. Due to its robustness against noise, it can enhance the performance of the system. The CNN-assisted BOFDA is expected to shorten the measurement time by more than nine times and open the way for applications, where faster monitoring is essential. KW - Fiber-optic sensors KW - Machine learning KW - Temperature and strain monitoring KW - Brillouin distributed sensing PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-524631 DO - https://doi.org/10.3390/s21082724 VL - 21 IS - 8 SP - 2724 PB - MDPI AN - OPUS4-52463 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Karapanagiotis, Christos A1 - Hicke, Konstantin A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Distributed humidity fiber-optic sensor based on BOFDA using a simple machine learning approach N2 - We report, to our knowledge for the first time, on distributed relative humidity sensing in silica polyimide-coated optical fibers using Brillouin optical frequency domain analysis (BOFDA). Linear regression, which is a simple and well-interpretable algorithm in machine learning and statistics, is utilized. The algorithm is trained using as features the Brillouin frequency shifts and linewidths of the fiber’s multipeak Brillouin spectrum. To assess and improve the effectiveness of the regression algorithm, we make use of machine learning concepts to estimate the model’s uncertainties and select the features that contribute most to the model’s performance. In addition to relative humidity, the model is also able to simultaneously provide distributed temperature information addressing the well-known cross-sensitivity effects. KW - Fiber optics sensors KW - Machine learning KW - Brillouin distributed sensing KW - Humidity sensing KW - Simultaneous temperature and humidity sensing PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-546294 DO - https://doi.org/10.1364/OE.453906 VL - 30 IS - 8 SP - 12484 EP - 12494 PB - OPTICA AN - OPUS4-54629 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - Multiscale reinforcement of Semi-Crystalline Thermoplastic Sheets and Honeycombs (M-RECT) T2 - ITHEC 2014, 2nd International Conference and Exhibition on Thermoplastic Composites CY - Bremen, Germany DA - 2014-10-27 PY - 2014 AN - OPUS4-32029 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reiche, T. A1 - Teichmann, H. A1 - Krebber, Katerina A1 - Salomon, O. A1 - Wood, A. T1 - Multiscale reinforcement of semi-crystalline thermoplastic sheets and honeycombs (M-RECT) N2 - M-RECT was a European FP7 funded project investigating multiscale reinforced thermoplastic composites. The project involved the functionalisation of carbon nanotubes (CNT) with a view to: • Improving their performance and ease of dispersion • Improving the damping characteristics of composites • Evaluating the mechanical performance of CNT reinforced laminates • Developing modelling Software for the design of materials and components • Developing sensor Systems to provide feedback on the local strains within such composites This presentation seeks to provide a general overview of the results from the project with particular emphasis T2 - ITHEC 2014 - 2nd International Conference and Exhibition on Thermoplastic Composites CY - Bremen, Germany DA - 27.10.2014 KW - Carbon nanotubes KW - Multiscale thermoplastic-matrix composites KW - Modelling PY - 2014 SN - 978-3933339256 SP - 12 EP - 15 AN - OPUS4-32353 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - Fiber Optic Sensors for SHM - From Laboratory to Industrial Applications (invited lecture) T2 - OSA Conference "Applied Industrial Optics: Spectroscopy, Imaging and Metrology (AIO)" CY - Seattle, WA, USA DA - 2014-07-13 PY - 2014 AN - OPUS4-31131 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liehr, Sascha A1 - Nöther, N. A1 - Steffen, Milan A1 - Gili, O. A1 - Krebber, Katerina ED - López-Higuera, J.M. ED - Jones, J. ED - López-Amo, M. ED - Santos, J.L. T1 - Performance of digital incoherent OFDR and prospects for optical fiber sensing applications N2 - We propose a digital implementation of the incoherent optical frequency domain reflectometry (I-OFDR) technique for precise backscatter measurement and optical fiber sensing applications. Specific performance parameters of the I-OFDR are discussed and compared to an analog vector network analyzer-based I-OFDR system. Improved sensitivity, dynamic range and signal stability of the digital I-OFDR is presented and demonstrated by means of quasi-distributed length change measurement. T2 - OFS2014 - 23rd International conference on optical fibre sensors CY - Santander, Spain DA - 02.06.2014 KW - Optical fiber sensors KW - Backscatter measurement KW - Strain sensor KW - OFDR KW - OTDR PY - 2014 DO - https://doi.org/10.1117/12.2059639 SN - 0277-786X SN - 1996-756X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE VL - 9157 SP - 915737-1 EP - 915737-4 AN - OPUS4-30899 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - Fiber optic sensors for SHM - from laboratory to industrial applications N2 - The paper highlights the research activities in Germany and Europe in the development of distributed fiber optic sensor for structural health monitoring (SHM) like the monitoring of geotechnical and civil infrastructures and presents selected results achieved within these projects. T2 - OSA Optics & photonics congress - Imaging and applied optics CY - Seattle, Washington, USA DA - 13.07.2014 PY - 2014 SN - 978-1-55752-308-2 DO - https://doi.org/10.1364/AIO.2014.AM4A.1 SP - 1 EP - 2 AN - OPUS4-31195 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Liehr, Sascha A1 - Muanenda, Y. S. A1 - Münzenberger, Sven A1 - Krebber, Katerina T1 - Relative change measurement of physical quantities using dual-wavelength coherent OTDR N2 - We propose the use of alternating pulse wavelengths in a direct-detection coherent optical time domain reflectometry (C-OTDR) setup not only to measure strain and temperature changes but also to determine the correct algebraic sign of the change. The sign information is essential for the intended use in distributed mode shape analysis of civil engineering structures. Correlating relative backscatter signal shifts in the temporal/signal domain allows for measuring with correct magnitude and sign. This novel approach is simulated, experimentally implemented and demonstrated for temperature change measurement at a spatial resolution of 1 m. KW - Fiber optics sensors KW - Backscattering KW - Rayleigh KW - C-OTDR KW - Distributed sensing KW - Temperature measurement KW - Strain measurement PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-389449 DO - https://doi.org/10.1364/OE.25.000720 SN - 1094-4087 VL - 25 IS - 2 SP - 720 EP - 729 PB - Optical Society of America CY - Washington, DC, USA AN - OPUS4-38944 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hicke, Konstantin A1 - Krebber, Katerina ED - Chung, Y. ED - Jin, W. ED - Lee, B. ED - Canning, J. ED - Nakamura, K. ED - Yuan, L. T1 - Towards efficient real-time submarine power cable monitoring using distributed fibre optic acoustic sensors N2 - Online condition monitoring of submarine power cables helps to avert failures and damages produced by mechanical impacts. We report, to our knowledge for the first time, on investigations regarding the feasibility of distributed fiber optic acoustic sensors based on C-OTDR, with the sensor fibres being embedded in the cable, to detect vibrations due to mechanical disturbances along the cable. We present first results of sensing experiments where acoustic signals are transmitted through water to simulate the corresponding submarine conditions. Furthermore, we show results evaluating the usefulness of fibre commonly embedded in existing power cable designs for our sensing purposes. T2 - 25th International Conference on Optical Fiber Sensors CY - Jeju-City, Jeju, Republic of Korea DA - 24.04.2017 KW - Distributed acoustic sensing KW - Power cable monitoring KW - C-OTDR KW - Fibre optic sensors KW - DAS PY - 2017 SN - 978-1-5090-4850-2 DO - https://doi.org/10.1117/12.2267474 SN - 0277-786X SN - 1996-756X VL - 10323 SP - 1032390-1 EP - 1032390-4 PB - SPIE CY - Bellingham, WA, USA AN - OPUS4-40088 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hicke, Konstantin A1 - Hussels, Maria-Teresa A1 - Eisermann, René A1 - Chruscicki, Sebastian A1 - Krebber, Katerina ED - Chung, Y. ED - Jin, W. ED - Lee, B. ED - Canning, J. ED - Nakamura, K. ED - Yuan, L. T1 - Condition monitoring of industrial infrastructures using distributed fibre optic acoustic sensors N2 - Distributed fibre optic acoustic sensing (DAS) can serve as an excellent tool for real-time condition Monitoring of a variety of industrial and civil infrastructures. In this paper, we portray a subset of our current Research activities investigating the usability of DAS based on coherent optical time-domain reflectometry (C-OTDR) for innovative and demanding condition Monitoring applications. Specifically, our application-oriented Research presented here aims at acoustic and vibrational condition monitoring of pipelines and piping systems, of rollers in industrial heavy-duty conveyor belt systems and of extensive submarine power cable installations, respectively. T2 - 25th International Conference on Fiber Optic Sensors CY - Jeju-City, Jeju, Republic of Korea DA - 24.04.2017 KW - Condition monitoring KW - Distributed fibre optic acoustic sensing KW - Fibre optic sensors KW - Industrial monitoring KW - DAS PY - 2017 SN - 978-1-5090-4850-2 DO - https://doi.org/10.1117/12.2272463 SN - 0277-786X SN - 1996-756X VL - 10323 SP - 103230J-1 EP - 103230J-4 PB - SPIE CY - Bellingham, WA, USA AN - OPUS4-40091 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hicke, Konstantin A1 - Hussels, Maria-Teresa A1 - Eisermann, René A1 - Chruscicki, Sebastian A1 - Krebber, Katerina T1 - Distributed Fibre Optic Acoustic and Vibration Sensors for Industrial Monitoring Applications N2 - We investigate the usability of distributed fibre optic acoustic sensing (DAS) for innovative and advanced monitoring applications in industrial and civil infrastructure installations. In this paper, we report on our ongoing application-oriented research activities regarding the utilization of DAS based on coherent optical time-domain reflectometry (C-OTDR) for condition monitoring of a variety of infrastructures. Specifically, our research presented here aims at acoustic condition monitoring of and fault detection in pipelines and industrial piping systems, at acoustic condition monitoring of rollers in industrial conveyor belt installations, and at acoustic condition monitoring of and threat detection in extensive submarine power cables, respectively. Furthermore, we show a method to mitigate the effect of sensitivity fading of C-OTDR based DAS due to unstable environmental conditions via the modification of the sensor fibre. This can help to provide a continuous adequate sensor functionality for a number of different industrial monitoring applications. T2 - SENSOR 2017 - 18th International Conference on Sensors and Measurement Technology CY - Nuremberg, Germany DA - 30.05.2017 KW - distributed acoustic sensing KW - fibre optic sensors KW - condition monitoring KW - industrial monitoring KW - C-OTDR PY - 2017 SN - 978-3-9816876-4-4 DO - https://doi.org/10.5162/sensor2017/B7.3 SP - 274 EP - 279 PB - AMA Service GmbH CY - Wunstorf AN - OPUS4-40473 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stajanca, Pavol A1 - Krebber, Katerina ED - Webb, D. J. ED - Scully, P. ED - Sugden, K. T1 - Radiation induced attenuation in perfluorinated polymer optical fibres for dosimetry applications N2 - Real-time measurement of radiation-induced attenuation (RIA) in a commercial perfluorinated polymer optical fibre (PF-POF) is performed with regard to on-line Radiation monitoring purposes. Spectral character and dose dependence of fibre’s RIA is measured in 450-900 nm spectral region. Fibre exhibited high radiation sensitivity in the visible region with strong increase towards the UV wavelengths. Good linearity and high sensitivity reaching up to 130 dBm-1/kGy was demonstrated in the VIS region for a low-dose range. This of-the-shelf PF-POF could be therefore interesting for on-line remote dosimetry applications. T2 - POF 2016: 25th International Conference on Plastic Optical Fibres CY - Birmingham, UK DA - 13.09.2016 KW - Perfluorinated polymer optical fibers KW - Gamma radiation monitoring KW - Radiation induced attenuation PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-403221 SN - 978-1-85449-408-5 SP - 167 EP - 170 CY - Birmingham AN - OPUS4-40322 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stajanca, Pavol A1 - Krebber, Katerina ED - Chung, Y. ED - Jin, W. ED - Lee, B. ED - Canning, J. ED - Nakamura, K. ED - Yuan, L. T1 - Towards on-line radiation monitoring with perfluorinated polymer optical fibers N2 - Sensitivity of two commercial perfluorinated (PF) polymer optical fibers (POFs) to gamma radiation was measured, compared and exploited for dosimetry purposes. Fiber radiation induced attenuation (RIA) was found to be highly wavelength dependent and pronounced towards the UV part of the spectrum. PF-POFs were shown to be highly radiation sensitive and RIA-based on-line radiation monitoring with sensitivity as high as 135 dBm-1/kGy was demonstrated at 460 nm with co-extruded PF-POF. In addition, thanks to low inherent attenuation in the near-infrared region, possibility of distributed radiation detection with PF-POFs was demonstrated for the first time, utilizing optical time domain reflectometry. T2 - 25th International Conference on Optical Fiber Sensors CY - Jeju, Republic of Korea DA - 24.04.2017 KW - Radiation-induced attenuation KW - Perfluorinated polymer optical fibers KW - Cytop KW - Gamma radiation KW - Optical fiber dosimetry KW - Optical fiber sensors KW - Distributed radiation sensing PY - 2017 SN - 978-1-5090-4850-2 DO - https://doi.org/10.1117/12.2256354 SN - 0277-786X SN - 1996-756X VL - 10323 SP - 103231O-1 EP - 103231O-4 PB - SPIE AN - OPUS4-40323 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Sporea, D. A1 - Neguţ, D. A1 - Krebber, Katerina T1 - Gamma radiation influence on silica optical fibers measured by optical backscatter reflectometry and Brillouin sensing technique N2 - We have studied the influence of gamma rays on physical properties of different commercially available silica optical fibers stepwise irradiated up to a total dose of 100 kGy. The detection of radiation-induced changes in silica glass offers the possibility of using selected optical fibers as distributed radiation sensors. The measurements performed by us were based on optical backscatter reflectometry and Brillouin distributed sensing. The measurement methods enable an analysis of radiation-induced modification of the group refractive index and density of the optical fibers. The most distinct physical effect observed by us concerns the increase of the optical attenuation with rising total radiation doses. Quantitative measurement results indicate a crucial impact of fiber dopants on radiation-induced physical and sensory characteristics of silica optical fibers affected by differences in fiber fabrication techniques. Based on the obtained results, the suitability of distributed Brillouin sensing for dosimetry applications seems to be improved by modifying the refractive index profile of the fiber core. T2 - Sixth European Workshop on Optical Fibre Sensors CY - Limerick, IRL DA - 31.05.2016 KW - Brillouin frequency shift KW - Lonizing radiation KW - Gamma radiation KW - Radiation dosimetry KW - Optical fiber sensor KW - Brillouin scattering KW - Distributed measurement KW - Backscatter reflectometry PY - 2016 SN - 978-1-5106-0219-9 DO - https://doi.org/10.1117/12.2236678 SN - 0277-786X VL - 9916 SP - Article Number: 99162J PB - Spie-Int Soc Optical Engineering CY - Bellingham, WA, USA AN - OPUS4-37083 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Habel, Wolfgang R. A1 - Krebber, Katerina A1 - Daum, Werner T1 - Results in standardization of FOS to support the use of SHM systems N2 - Measurement and data recording systems are important parts of a holistic Structural Health Monitoring (SHM) system. New sensor technologies such as fiber-optic sensors are often used; however, standards (or at least guidelines) are not yet available or internationally approved. This lack in standardization makes the acceptance of FOS technologies in complex SHM systems substantially difficult. A standard family for different FOS technologies is therefore being developed that should help to design SHM systems in an optimal way. International standardization activities take place in several standardization bodies such as IEC and ASTM, and within SHM societies such as ISHMII. The paper reports on activities in standardization of fiber-optic sensors, on results already achieved, and on newly started projects. Combined activities of fiber sensor experts and SHM experts from Civil Engineering are presented. These contributions should help owners of structures as well as developers of sensors and monitoring systems to select effective and validated sensing technologies. Using these standards, both parties find recommendations how to proceed in development of SHM systems to evaluate the structural behavior based on e.g. standardized fiber optic sensors, and to derive necessary measures, e.g. the optimal maintenance strategy. T2 - Sixth European Workshop on Optical Fibre Sensors CY - Limerick, Ireland DA - 30.05.2016 KW - Fiber-optic sensor KW - Standard KW - Temperature KW - Strain KW - Monitoring KW - Structural health KW - Application PY - 2016 DO - https://doi.org/10.1117/12.2236863 SN - 0277-786X VL - 9916 SP - 991625-1 EP - 991625-4 AN - OPUS4-37053 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liehr, Sascha A1 - Krebber, Katerina T1 - Phase-OFDR for Distributed Disturbance Measurement N2 - We introduce the optical frequency domain reflectometry (OFDR) technique based on intensity modulation frequency sweep measurement for distributed disturbance measurement in optical fibres. By evaluating interferometric Rayleigh scattering changes along the fibre, strain and temperature changes are detected with 100 nε sensitivity and 10 mK resolution. The vibration frequencies for low frequencies and up to the kHz-range can be obtained from power change Evaluation in the spatial domain. This novel OFDR approach is a low-cost alternative for distributed disturbance measurement up to distances of several kilometres. T2 - Sixth European Workshop on Optical Fibre Sensors CY - Limerick, Ireland DA - 31.05.2016 KW - Temperature sensing KW - OFDR KW - Distributed sensor KW - Rayleigh scattering KW - Strain measurement PY - 2016 UR - http://proceedings.spiedigitallibrary.org/conferenceproceedings.aspx DO - https://doi.org/doi:10.1117/12.2236851 SN - 0277-786X VL - Vol. 9916 SP - Paper 991624, 4 PB - SPIE CY - Bellingham, Washington USA AN - OPUS4-37228 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liehr, Sascha A1 - Krebber, Katerina T1 - Applications and prospects for distributed sensing using polymer optical fibres N2 - One of the unique advantages of polymer optical fibres (POF) is that they can be used to measure very high strain values up to 100 % and beyond exceeding the strain limits of silica fibre-based sensor principles. In this paper the distributed strain measurement capabilities of POF based on backscatter change evaluation are summarized and distributed backscatter measurement technologies are intro-duced. Application examples in the structural health monitoring (SHM) field are presented: a promising approach is the integration into technical textiles for high-strain measurement in earthwork structures and crack detection in buildings. The potential of POF for future applications in SHM such as distributed relative humidity sensing is discussed. T2 - International Conference on Smart Infrastructure and Construction CY - Cambridge, UK DA - 27.06.2016 KW - Strain measurement KW - Structural health monitoring KW - OTDR KW - Polymer Optical Fibre KW - Distributed sensing PY - 2016 UR - http://www.icevirtuallibrary.com/doi/abs/10.1680/tfitsi.61279.093 SN - 978-0-7277-6127-9 DO - https://doi.org/10.1680/tfi tsi.61279.093 SP - 93 EP - 98 PB - ICE Publishing CY - London, UK AN - OPUS4-37230 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann, Detlef A1 - Krebber, Katerina ED - Lutz, B. ED - Möller, G. ED - Rücker, Werner ED - Schiefelbein, N. T1 - Herausforderungen bei der Nutzung faseroptischer Sensoren für spezielle geotechnische Fragestellungen N2 - Geotechnische Tätigkeitsfelder und Forschungsaufgaben haben sich immer an den modernen Herausforderungen orientiert und umfassen z. B. die Beschreibung und Quantifizierung der Interaktion zwischen Baugrund und Bauwerk, die Untersuchung des Untergrunds besonders hinsichtlich der technischen und sozialen Infrastrukturen und die Beeinflussung der Umwelt. Fragen der zivilen Sicherheit stellen steigende Anforderungen an die Tragfähigkeit und Dauerhaftigkeit von Bauwerken. Zur Lösung dieser Aufgaben entstehen vielfältige interessante Methoden und Verfahren zur Strukturbewertung, die neben der Erfassung des allgemeinen Zustands auch neue Erkenntnisse zum Bauwerksverhalten im Hinblick auf moderne Bautechnologien und auf die Lebensdauer von Bauwerken liefern. Die systematische, zuverlässige und langzeitstabile Erfassung von geotechnischen Messgrößen und Parametern bei der Strukturbewertung sowie die Beobachtung und Bewertung der geologischen Gegebenheiten mit technischen Hilfsmitteln ist dafür unerlässlich und lässt sich mit den Begriffen Zustandsanalyse und Bauwerksmonitoring zusammenfassen. Das Ziel dabei ist, mögliche Schädigungsmechanismen frühzeitig zu erkennen, um rechtzeitig Gegenmaßnahmen ergreifen zu können. T2 - Messen im Bauwesen 2014 - Neue Messtechniken und Anwendungsfälle CY - Berlin, Germany DA - 04.03.2014 KW - Faseroptische Sensorik KW - Optische Messverfahren KW - Fabry-Perot-Interferometer KW - Faser-Bragg-Gitter KW - Applikation KW - Anwendungen KW - Geomatten KW - Raman KW - Brillouin PY - 2014 SN - 978-3-9815944-7-8 SP - 7 EP - 26 AN - OPUS4-33812 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Krebber, Katerina A1 - Daum, Werner ED - Peters, K.J. T1 - Standardization in fibre-optic sensing for structural safety - activities in the ISHMII and IEC N2 - Fiber-optic sensors are increasingly established in the sensor market. Their advantages have unquestionably been verified by numerous demonstrations to enhance the operational performance of aged structures or to monitor the structural behavior of safety-relevant structures or their components. However, there are some barriers in use due to a lack of extensive standardization of fiber-optic sensors. This leads very often to restraints in the user’s community. The paper shows the status in international standardization of fiber-optic sensors as well as current activities in leading institutions such as IEC and ISHMII and others with the purpose of providing relevant standards for a broader use of selected fiber-optic sensor technologies. T2 - Smart sensor phenomena, technology, networks, and systems integration 2015 CY - San Diego, CA, USA DA - 08.03.2015 KW - Fibre-optic sensor KW - Standard KW - Temperature KW - Strain KW - Monitoring KW - Reliability KW - Application PY - 2015 DO - https://doi.org/10.1117/12.2185602 SN - 0277-786X VL - 9436 SP - 94360S-1 EP - 94360S-7 AN - OPUS4-33814 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang A1 - Basedau, Frank A1 - Hofmann, Detlef A1 - Krebber, Katerina A1 - Jentsch, H. A1 - Senze, A. ED - Ilki, A. ED - Motavalli, M. ED - Inci, P. ED - Köhli, M. T1 - Online-detection of slipping soil areas by embedded fiber-optic sensing rods N2 - Movements in geological areas are often caused by shear zones deep in the underground or by hardly observable slipping zones. Detection of movements reaching critical values is of crucial importance to avoid losses and harms. Optical sensor fibers with gauge lengths of several meters or even distributed fiber-optic sensors with gauge lengths of hundreds of meters allow detecting deformation of such zones with quite good resolution. The paper presents a new technology of detecting deformations and movements in soil or rock massifs. The core part of the sensing system is a tiny pultruded rod with an outer diameter of 3 mm to 6 mm. It contains two fiber-optic sensor systems. One sensor system is used for permanent online measurement and provides integral strain information along the whole length of the rod; in case of critical deformations, it provides a warning signal. The second sensing system uses fiber-optic Bragg grating (FBG) strain sensors located close to the expected shear zone. This measurement system will be activated after the warning signal has been initiated by the integral strain measurement system. The FBG strain sensor system records then resulting deformations in detail. The sensing rod containing both sensor systems can be installed in a borehole to detect beginning soil movements automatically. The electronic equipment is powered by a solar panel; the amount of deformation in soil or rock formations can be estimated from the strain change measured in the sensor fibers. The effectiveness of this warning system will be shown using the example of a critically sliding slope in an open brown coal pit in Germany. T2 - SMAR 2015 - 3rd Conference on smart monitoring, assessment and rehabilitation of civil structures CY - Antalya, Turkey DA - 07.09.2015 KW - SHM KW - Standardization KW - Reliability KW - Fibre-optic sensor KW - Embedded sensor KW - Monitoring KW - Maintenance PY - 2015 SN - 978-3-905594-65-2 SP - Paper 222, 1 EP - 8 AN - OPUS4-34544 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stajanca, Pavol A1 - Cetinkaya, O. A1 - Schukar, Marcus A1 - Mergo, P. A1 - Krebber, Katerina T1 - Climatic stability of polymer optical fibers for sensing applications N2 - Systematic investigation of annealing behavior of drawn PMMA fibers was performed. Dynamics of annealing process were measured under different environmental conditions by fiber longitudinal shrinkage monitoring. Process was found to follow stretched exponential decay function indicating heterogeneous nature of underlying molecular dynamics. Consequences of fiber annealing for climatic stability of polymer optical fiber-based sensors are discussed, emphasizing importance of fiber controlled post-fabrication annealing. Dependence of induced fiber shrinkage on annealing time, temperature and fiber drawing conditions is investigated and interpreted. In addition, strong influence of humidity on annealing process was observed, which was not recognized in previous studies. This further highlights role of fiber post-fabrication thermal treatment with respect to intended operating conditions. T2 - POF 2015 - 24th International conference on plastic optical fibers CY - Nuremberg, Germany DA - 22.09.2015 KW - Polymer optical fibers KW - Polymethyl methacrylate KW - Climatic stability KW - Fiber annealing PY - 2015 SP - 209 EP - 212 AN - OPUS4-34422 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rohwetter, Philipp A1 - Eisermann, René A1 - Krebber, Katerina ED - Kalinowski, H.J. ED - Fabris, J.L. ED - Bock, W.J. T1 - Distributed acoustic sensing: Towards partial discharge monitoring N2 - We report on the successful application of distributed acoustic sensing (DAS) to the detection of partial discharge (PD). A detection limit of about 1 nC discharge magnitude was achieved for PD in a real-scale model of a high voltage termination. Dedicated ultrasonic fibre-optic transducers were interrogated using coherent optical time-domain Rayleigh backscatter reflectometry (C-OTDR). Random quadrature demodulation was employed for retrieving relevant acoustic information from the raw C-OTDR backscatter traces. To our knowledge, our results are a first-time demonstration that quasi-distributed fibre-optic acoustic sensing is a candidate technology for the acoustic partial discharge monitoring of power cable joints and terminations. T2 - OFS2015 - 24rd International conference on optical fibre sensors CY - Curitiba, Brazil DA - 28.09.2015 KW - Distributed acoustic sensing KW - Coherent Rayleigh OTDR KW - Partial discharge KW - Acoustic emission KW - Silicone elastomer KW - Stress cone KW - High voltage cable accessories PY - 2015 SN - 9781628418392 DO - https://doi.org/10.1117/12.2194850 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE VL - 2015/9634 SP - 96341C-1 EP - 96341C-4 PB - SPIE CY - Bellingham, WA, USA AN - OPUS4-34407 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Liehr, Sascha A1 - Krebber, Katerina A1 - Steffen, Milan A1 - Wosniok, Aleksander T1 - Fördermaßnahme KMU-innovativ: Informations- und Kommunikationstechnologie (IKT), EMS-261-003 (Digital OFDR - Entwicklung der digitalen Frequenzbereichsanalyse zur verteilten Rückstreumessung in optischen Fasern-Teilvorhaben: Sensorverfahren und Systembetrachtung / Schlussbericht zum Teilvorhaben KW - Digital OFDR KW - Verteilte Rückstreumessung KW - Frequenzbereichsanalyse PY - 2015 IS - BAM Vh 8158 SP - 1 EP - 45 CY - Berlin AN - OPUS4-34170 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Distributed Brillouin fiber optic sensor system for long-term structural health monitoring N2 - We report on the development of a distributed fiber optical sensor system for structural health monitoring of largc-scale geotechnical and civil infrastructures. The system is based on Brillouin frequency domain analysis (BOFDA) for distributed measurement of strain and temperature along Standard silica optical fibers used as sensors. By additional incorporation of the fiber optic sensors in geosynthetics, two-dimensional sensors can be realized. Such smart geosynthetics can be used for reinforeerneut of geotechnical and masonry structures and the embedded fiber optic sensors can provide information about the condition of the structures and detect the presence of any damages and destructions in real time. T2 - 16th International conference 'Technical dam control' CY - Wierchomla Mala, Poland DA - 29.09.2015 KW - Distributed fiber optical sensor KW - Brillouin frequency domain analysis KW - Smart geosynthetics KW - Structural health monitoring PY - 2015 SN - 978-83-64979-09-5 SP - 271 EP - 278 AN - OPUS4-34728 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreier, Andy A1 - Jeschke, T. A1 - Petermann, K. A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Analytical model for mode-based insertion loss in ball-lensed coupling of graded-index silica and polymer fibres N2 - Analytical model for ball-lensed couplers to calculate the insertion loss for each optical mode. The basis for the calculation are commercial perfluorinated polymer optical (PFGI-POFs) and silica based fibres (SOFs). The modal power distribution for given misalignments are presented as well as the reflection-based losses at all optical interfaces. Additionally, the ball-lensed interconnection between PFGI-POF and SOF was theoretically demonstrated. T2 - POF 2017: 26th International Conference on Plastic Optical Fibres CY - Aveiro, Portugal DA - 13.09.2017 KW - Polymer optical fibre KW - Optical connector PY - 2017 VL - 2017 SP - 1 EP - 4 AN - OPUS4-41979 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Henschel, H. A1 - Hoeffgen, S.K. A1 - Krebber, Katerina A1 - Kuhnhenn, J. A1 - Weinand, U. T1 - Influence of Fiber Composition and Grating Fabrication on the Radiation Sensitivity of Fiber Bragg Gratings N2 - The radiation-induced Bragg wavelength shift (BWS) was measured with type I gratings made of 12 fibers with very different composition, i.e., of fibers with an extremely different radiation-induced attenuation. With two of the fibers fabrication parameters like laser intensity, hydrogen loading, and annealing conditions after grating inscription were varied. With another fiber type I and type II gratings were made by a completely different process. With gratings made under identical conditions of the 12 fibers the radiation-induced BWS only varied by about a factor of three. Varying the fabrication parameters led to BWS differences up to nearly a factor of ten. KW - Fiber Bragg gratings KW - Gamma radiation KW - Optical fiber sensor KW - Radiation effects PY - 2008 DO - https://doi.org/10.1109/TNS.2008.2001039 SN - 0018-9499 SN - 1558-1578 VL - 55 IS - 4 SP - 2235 EP - 2242 PB - Institute of Electrical and Electronics Engineers (IEEE) CY - New York, NY, USA AN - OPUS4-18570 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Liehr, Sascha A1 - Lenke, Philipp A1 - Wendt, Mario A1 - Krebber, Katerina A1 - Glötzl, R. A1 - Schneider-Glötzl, J. A1 - Gabino, L. A1 - Krywult, L. ED - Bernadette Havranek, ED - Masoud Motavalli, ED - Urs Meier, T1 - Distributed polymer optical fiber sensors in geotextiles for monitoring of earthwork structures T2 - 4th International conference on structural health monitoring of intelligent infrastructure CY - Zurich, Switzerland DA - 2009-07-22 KW - Distributed sensor KW - Optical fiber sensor KW - Geotextile KW - Technical textile KW - POF sensor KW - Structural health monitoring KW - SHM KW - OTDR KW - Fiber optic sensors KW - Polymer optical fibers (POF) KW - Strain sensor PY - 2009 SN - 978-3-905594-52-2 IS - Paper 520 SP - 1 EP - 7(?) CY - Zurich, Switzerland AN - OPUS4-19787 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Liehr, Sascha A1 - Wendt, Mario A1 - Krebber, Katerina A1 - Münich, J.C. A1 - Stempniewski, L. A1 - Metschies, H. ED - Bernadette Havranek, ED - Masoud Motavalli, ED - Urs Meier, T1 - Distributed polymer optical fiber sensors integrated in technical textiles for monitoring of masonry structures T2 - 4th International conference on structural health monitoring of intelligent infrastructure CY - Zurich, Switzerland DA - 2009-07-22 KW - Structural health monitoring KW - Fiber optic sensors KW - OTDR KW - Polymer optical fibers (POF) KW - POF sensors KW - Distributed sensor KW - Strain sensor KW - Technical textiles KW - Masonry PY - 2009 SN - 978-3-905594-52-2 IS - Paper 521 SP - 1 EP - 7(?) CY - Zurich, Switzerland AN - OPUS4-19788 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Liehr, Sascha A1 - Lenke, Peter A1 - Wendt, Mario T1 - Distributed POF sensors for structural health monitoring - First practical applications and field tests results N2 - Distributed POF sensors based on OTDR have been developed for SHM purposes of geotechnical and masonry structures. The first field tests conducted at a creeping slope and a brick building have proved the functionality of the sensors. T2 - POF 2009 - 18th International conference on plastic optical fibers CY - Sydney, Australia DA - 2009-09-07 PY - 2009 IS - Session 1 (S1_25) SP - 1 EP - 6 CY - Sydney, Australia AN - OPUS4-19914 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schukar, Marcus A1 - Grzemba, Birthe A1 - Krebber, Katerina A1 - Luber, M. T1 - Integration technology of POF sensors into composites for structural health monitoring N2 - We have investigated the application technology of polymer optical fibers (POF) as sensors integrated into respectively applied onto composites for structural health monitoring by using different manufacturing methods and several types of POF. T2 - POF 2009 - 18th International conference on plastic optical fibers CY - Sydney, Australia DA - 2009-09-07 KW - Optische Polymerfasern (POF) KW - Fasersensorik KW - Structural Health Monitoring KW - Faserverbundwerkstoffe KW - OTDR KW - Faser-Integration PY - 2009 IS - Session 1 (S1_25) SP - 1 EP - 4 CY - Sydney, Australia AN - OPUS4-19915 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Liehr, Sascha A1 - Lenke, Philipp A1 - Wendt, Mario A1 - Krebber, Katerina ED - Fu-Kuo Chang, T1 - POF sensors integrated in technical textiles for monitoring of earthwork structures and masonry T2 - Structural health monitoring 2009 - 7th International workshop on structural health monitoring CY - Stanford, CA, USA DA - 2009-09-09 KW - Distributed strain sensor KW - Optical fiber sensor KW - Geotextile KW - Technical textiles KW - POF sensor KW - Structural health monitoring KW - SHM KW - OTDR PY - 2009 SN - 978-1-60595-007-5 VL - 2 SP - 1739 EP - 1746 PB - DEStech Publications, Inc. AN - OPUS4-19960 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Liehr, Sascha A1 - Nöther, Nils A1 - Krebber, Katerina T1 - Incoherent optical frequency domain reflectometry and distributed strain detection in polymer optical fibers N2 - We present, to our knowledge for the first time, the possibility of measuring the backscatter signal of perfluorinated polymer optical fibers (POF) using an incoherent optical frequency domain reflectometry (OFDR) technique. The OFDR setup is described and it is shown that the dynamic range and measurement speed are superior to standard OTDR systems. It is shown for the first time that distributed detection of strain in POF is possible using the OFDR technique. KW - Optical frequency domain reflectometry KW - OFDR KW - OTdr KW - Polymer optical fibers KW - POF KW - Fiber sensors KW - Distributed sensors KW - Strain sensors PY - 2010 DO - https://doi.org/10.1088/0957-0233/21/1/017001 SN - 0957-0233 SN - 1361-6501 VL - 21 IS - 1 SP - 017001-1 - 017001-4 PB - IOP Publ. Ltd. CY - Bristol AN - OPUS4-21625 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liehr, Sascha A1 - Krebber, Katerina T1 - A novel technique for quasi-distributed and dynamic length change measurement in optical fibers N2 - We present a novel technique to measure length changes between multiple reflection points in optical fibers. The technique allows for dynamic measurement up to 1kHz and a resolution better than 1µm. T2 - International conference "Optical sensors" CY - Karlsruhe, Germany DA - 2010-06-21 PY - 2010 DO - https://doi.org/10.1364/SENSORS.2010.STuB5 IS - STuB5 SP - 1 EP - 2 AN - OPUS4-21626 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - Nöther, Nils A1 - Wendt, Mario A1 - Wosniok, Aleksander T1 - Protection of critical infrastructure using fiber optic sensors embedded in technical textiles N2 - Terrorists and criminals more and more attack and destroy important infrastructures like routes, railways, bridges, tunnels, dikes and dams, important buildings. Therefore, reliable on-line and long-term monitoring systems are required to protect such critical infrastructures. Fiber optic sensors are well-suited for that. They can be installed over many kilometers and are able to measure continuously distributed strain, pressure, temperature and further mechanical and physical quantities. The very tiny optical fibers can be integrated into structures and materials and can provide information about any significant changes or damages of the structures. These so-called smart materials and smart structures are able to monitor itself or its environment. Particularly smart technical textiles with embedded fiber optic sensors have become very attractive because of their high importance for the structural health monitoring of geotechnical and masonry infrastructures. Such textiles are usually used for reinforcement of the structures; the embedded fiber optic sensors provide information about the condition of the structures and detect the presence of any damages and destructions in real time. Thus, critical infrastructures can be preventively protected. The paper will introduce this innovative field and will present the results achieved within several German and European projects. T2 - Fiber optic sensors and applications VII CY - Orlando, FL, USA DA - 2010-04-07 KW - Distributed sensors KW - Brillouin sensors KW - Polymer optical fibers (POF) KW - POF sensors KW - POF OTDR KW - Strain sensors KW - Technical textiles KW - Geotextiles KW - Fiber optic sensors PY - 2010 SN - 9780819481412 DO - https://doi.org/10.1117/12.851013 SN - 0277-786X VL - 7677 IS - 767707 SP - 1 EP - 14 PB - SPIE, the International Society for Optical Engineering CY - Bellingham, Wash. AN - OPUS4-21675 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Liehr, Sascha A1 - Krebber, Katerina T1 - A novel quasi-distributed fibre optic displacement sensor for dynamic measurement N2 - We present a novel technique based on incoherent optical frequency domain reflectometry (OFDR) to measure length changes quasi-distributed between reflection points in optical fibres. The technique enables length changes to be measured with a resolution better than 1 µm and allows for static and dynamic measurement capabilities up to 2 kHz. We demonstrate that dynamic measurements of multiple fibre sections can be conducted independently from each other with high precision. Due to the precise and dynamic measurement capabilities, the proposed sensor system is expected to open new fields of application, especially in the structural-health-monitoring sector. Possible applications are discussed in the paper. KW - Strain sensor KW - Optical frequency domain reflectometry KW - OFDR KW - Optical fibre KW - Fibre sensors KW - Quasi-distributed sensors KW - Dynamic strain measurement PY - 2010 UR - http://iopscience.iop.org/0957-0233/21/7/075205/pdf/0957-0233_21_7_075205.pdf DO - https://doi.org/10.1088/0957-0233/21/7/075205 SN - 0957-0233 SN - 1361-6501 VL - 21 IS - 7 SP - 075205-1 - 075205-6 PB - IOP Publ. Ltd. CY - Bristol AN - OPUS4-21812 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - de Oliveira, Rui A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - Michaud, V. T1 - Development of adaptive composites with embedded plastic optic fibres N2 - This study discusses the development of advanced composite materials with sensing capabilities obtained from the embedment of long period gratings in microstructured plastic optical fibres (mPOF-LPG). The mPOF-LPG was embedded in a carbon fibre reinforced polymer (CFRP) unidirectional laminate manufactured in autoclave. Processing steps were established in order to insure that mPOF does not suffer significant optical and structural degradation. The strain and temperature responses of the embedded mPOF-LPG were investigated. T2 - ICRACM 2010 - 3rd International conference on recent advances in composite materials CY - Limoges, France DA - 2010-12-13 KW - Polymer composites KW - Optical fibre sensors KW - mPOF-LPG KW - SHM PY - 2010 IS - Polymer composite session / FP-Oliveira SP - 1 EP - 6 AN - OPUS4-23040 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Lenke, Peter A1 - Liehr, Sascha A1 - Nöther, Nils A1 - Wendt, Mario A1 - Wosniok, Aleksander A1 - Schneider-Gloetzl, J. A1 - Gloetzl, R. T1 - Distributed fibre optic sensors embedded in technical textiles for monitoring of geotechnical and masonry structures T2 - Monitoring technologies workshop - MoDeRn (Proceedings) CY - Troyes, France DA - 2010-06-07 PY - 2010 IS - OP.7 SP - 71 EP - 72 AN - OPUS4-23041 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krebber, Katerina A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - Witt, Jens A1 - Schukar, Marcus ED - Ecke, Wolfgang ED - Kara J. Peters, ED - Norbert G. Meyendorf, T1 - Smart technical textiles with integrated POF sensors N2 - Fiber optic sensors based on polymer optical fibers (POF) take advantage of the high elasticity and high break-down strain of POF. Because of their outstanding elastic properties, POF are well suited for integration into technical textiles like geotextiles and medical textiles. Smart textiles with incorporated POF sensors, able to sense various mechanical and physical quantities, can be realized. The integration of POF as a sensor into geotextiles for monitoring of displacement of soil is very attractive since POF can be used for distributed strain measurement of strain values of more than 40 %. An online monitoring of critical mechanical deformations of geotechnical structures like dikes, dams, slopes, embankments as well as of masonry structures can be ensured. Medical textiles that incorporate POF sensors can control vital physiological parameters like respiratory movement and can be used for wearable health monitoring of patients requiring a continuous medical assistance and treatment. The biocompatibility of POF is an important criterion for selecting POF as a medical sensor. The paper shows selected examples of using POF sensors for the mentioned monitoring purposes. T2 - Smart Sensor Phenomena, Technology, Networks, and Systems 2008 CY - San Diego, California, USA DA - 2008-03-10 KW - Fiber optic sensors KW - Polymer optical fibers (POF) KW - POF sensors KW - Geotextiles KW - Medical textiles KW - Strain sensor KW - Respiratory monitoring KW - POF OTDR KW - Distributed sensor KW - Geotechnical structures PY - 2008 SN - 978-0-8194-7119-2 DO - https://doi.org/10.1117/12.776758 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE VL - 6933 IS - 6933 SP - 69330V-1 - 69330V-15 PB - SPIE CY - Bellingham AN - OPUS4-17680 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Liehr, Sascha A1 - Lenke, Philipp A1 - Krebber, Katerina A1 - Seeger, M. A1 - Thiele, E. A1 - Metschies, H. A1 - Gebreselassie, B. A1 - Münich, J.C. A1 - Stempniewski, L. ED - Francis Berghmans, ED - Mignani, Anna Grazia ED - Cutolo, Antonello ED - Patrick P. Meyrueis, ED - Thomas P. Pearsall, T1 - Distributed strain measurement with polymer optical fibers integrated into multifunctional geotextiles N2 - Fiber optic sensors based on polymer optical fibers (POF) have the advantage of being very elastic and robust at the same time. Unlike silica fibers, standard PMMA POF fibers can be strained to more than 40% while fully maintaining their light guiding properties. We investigated POF as a distributed strain sensor by analysing the backscatter increase at the strained section using the optical time domain reflectometry (OTDR) technique. This sensing ability together with its high robustness and break-down strain makes POF well-suited for integration into technical textiles for structural health monitoring purposes. Within the European research project POLYTECT (Polyfunctional textiles against natural hazards) technical textiles with integrated POF sensors, among others sensors are being developed for online structural health monitoring of geotechnical structures. Mechanical deformation in slopes, dams, dikes, embankments and retrofitted masonry structures is to be detected before critical damage occurs. In this paper we present the POF strain sensor properties, reactions to disturbing influences as temperature and bends as well as the results of the different model tests we conducted within POLYTECT. We further show the potential of perfluorinated graded-index POF for distributed strain sensing with increased spatial resolution and measurement lengths. T2 - Optical Sensors 2008 CY - Strasbourg, France DA - 2008-04-07 KW - Fiber optic sensors KW - OTDR KW - Polymer optical fibers (POF) KW - POF sensors KW - Distributed sensor KW - Strain sensor KW - Geotextiles KW - Structural health monitoring PY - 2008 SN - 978-0-8194-7201-4 DO - https://doi.org/10.1117/12.780508 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE VL - 7003 IS - 7003 SP - 700302-1 - 700302-15 PB - SPIE CY - Bellingham AN - OPUS4-17951 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina T1 - Distributed POF Sensors for Structural Health Monitoring - First Practical Applications and Field Tests Results. Invited Paper T2 - 18th International Conference on POF CY - Sydney, Australia DA - 2009-09-09 PY - 2009 AN - OPUS4-20193 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Nöther, Nils A1 - Krebber, Katerina ED - Juergen Brugger, ED - Danick Briand, T1 - Distributed fibre optic sensor system for temperature and strain monitoring based on Brillouin optical-fibre frequency-domain analysis T2 - EUROSENSORS XXIII: sensors, actuators and micro/nanosystems CY - Lausanne, Switzerland DA - 2009-09-06 KW - BOFDA KW - Sideband technique KW - Fibre optic sensors KW - Distributed Brillouin sensors KW - Stimulated Brillouin scattering KW - Nonlinear optics PY - 2009 SN - 1876-6196 SP - 1 EP - 4(?) AN - OPUS4-20235 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liehr, Sascha A1 - Wendt, Mario A1 - Krebber, Katerina ED - Jones, J. ED - Culshaw, B. ED - Ecke, W. ED - López-Higuera, J.M. ED - Willsch, R. T1 - Distributed perfluorinated POF strain sensor using OTDR and OFDR techniques T2 - 20th International conference on optical fibre sensors (Proceedings of SPIE) CY - Edinburgh, Scotland, UK DA - 2009-10-05 KW - Distributed strain sensor KW - Optical fiber sensor KW - Polymer optical fiber KW - POF sensor KW - Structural health monitoring KW - OTDR KW - OFDR PY - 2009 SN - 978-0-8194-7814-6 SN - 0277-786X SP - 75036G-1 - 75036G-4 PB - SPIE, the International Society for Optical Engineering AN - OPUS4-20289 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Liehr, Sascha A1 - Lenke, Philipp A1 - Wendt, Mario A1 - Krebber, Katerina A1 - Seeger, M. A1 - Thiele, E. A1 - Metschies, H. A1 - Gebreselassie, B. A1 - Münich, J.C. T1 - Polymer optical fiber sensors for distributed strain measurement and application in structural health monitoring N2 - Polymer optical fiber (POF) sensors have the unique ability to measure high strain distributed along the fiber up to 40% using the optical time-domain reflectometry (OTDR) technique. Both, standard PMMA fibers and perfluorinated (PF) graded-index (GI) POF are introduced and evaluated in potential use and applicability. Further, distributed length change measurement based on cross-correlation analysis of the characteristic fiber signature of PF POF is introduced. We conclude the advances in distributed POF strain sensors technology with respect to application in structural health monitoring. Special focus is on the sensor integration into technical textiles for health monitoring of geotechnical structures and masonry structures. Measurement results of sensor-equipped textiles in different model tests are presented, displacement of soil and cracks in retrofitted masonry structures are detected and evaluated. KW - Distributed strain sensor KW - Optical fiber sensor KW - POF sensors KW - Structural health monitoring PY - 2009 DO - https://doi.org/10.1109/JSEN.2009.2018352 SN - 1530-437X SN - 1558-1748 VL - 9 IS - 11 SP - 1330 EP - 1338 CY - New York, NY, USA AN - OPUS4-20311 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Glötzl, R. A1 - Schneider-Glötzl, J. A1 - Liehr, Sascha A1 - Lenke, Philipp A1 - Wendt, Mario A1 - Krebber, Katerina A1 - Gabino, L. A1 - Krywult, J. ED - Klapperich, Herbert ED - Jacob, Dieter ED - Azzam, Rafig ED - Wolf, Rainer T1 - Eine neue Geotextilmessmatte mit verteilter Sensortechnik im Einsatz - Suche einer geeigneten Baustelle, Einbauerfahrungen und erste Ergebnisse T2 - 4. Symposium Umweltgeotechnik & 5. Freiberger Geotechnik-Kolloquium & Fachausstellung CY - Freiberg, Deutschland DA - 2009-06-04 PY - 2009 SN - 1613-4753 IS - Publication 7 SP - 1 EP - 9(?) CY - Freiberg AN - OPUS4-20400 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Glötzl, R. A1 - Schneider-Glötzl, J. A1 - Liehr, Sascha A1 - Lenke, Philipp A1 - Wendt, Mario A1 - Krebber, Katerina A1 - Gabino, L. A1 - Krywult, J. A1 - Krywult, L. T1 - First results of a field test in Belchatow brown coal mine to investigate creeping slopes T2 - VI. International brown coal mining congress "Brown coal - energy - environment - future" CY - Belchatów, Poland DA - 2009-05-18 PY - 2009 SN - 978-83-88316-85-2 SP - 57 EP - 64 PB - Art-Teskt CY - Kraków, Poland AN - OPUS4-20401 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kasinathan, Murugesan A1 - Rao, C.B. A1 - Murali, N. A1 - Jayakumar, T. A1 - Raj, B. A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Analysis of stimulated Brillouin scattering characteristics in frequency domain T2 - ICOP 2009 - International conference on optics & photonics CY - Chandigarh, India DA - 2009-10-30 KW - BOFDA KW - Fibre optic sensors KW - Distributed Brillouin sensors KW - Stimulated Brillouin scattering KW - Nonlinear optics PY - 2009 SP - 1 EP - 5(?) AN - OPUS4-21150 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kasinathan, Murugesan A1 - Rao, C.B. A1 - Murali, N. A1 - Jayakumar, T. A1 - Raj, B. A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Use of Brillouin optical time domain analyser in testing of adhesive bonding T2 - SENNET`09 - International conference on sensors and related networks CY - Vellore, India DA - 2009-12-08 KW - Brillouin KW - Frequency domain analysis KW - Time domain analysis KW - Adhesive KW - Bond evaluation KW - Temperature KW - Strain KW - Distributed sensor PY - 2009 SP - 190 EP - 192 CY - Vellore, India AN - OPUS4-21151 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Liehr, Sascha A1 - Wendt, Mario A1 - Krebber, Katerina T1 - Distributed strain measurement in perfluorinated polymer optical fibres using optical frequency domain reflectometry N2 - We present the latest advances in distributed strain measurement in perfluorinated polymer optical fibres (POFs) using backscatter techniques. Compared to previously introduced poly(methyl methacrylate) POFs, the measurement length can be extended to more than 500 m at improved spatial resolution of a few centimetres. It is shown that strain in a perfluorinated POF can be measured up to 100%. In parallel to these investigations, the incoherent optical frequency domain reflectometry (OFDR) technique is introduced to detect strained fibre sections and to measure distributed length change along the fibre with sub-millimetre resolution by applying a cross-correlation algorithm to the backscatter signal. The overall superior performance of the OFDR technique compared to the optical time domain reflectometry in terms of accuracy, dynamic range, spatial resolution and measurement speed is presented. The proposed sensor system is a promising technique for use in structural health monitoring applications where the precise detection of high strain is required. KW - Distributed strain sensor KW - Optical fibre sensor KW - Polymer optical fibre KW - POF sensor KW - Structural health monitoring KW - OTDR KW - OFDR PY - 2010 DO - https://doi.org/10.1088/0957-0233/21/9/094023 SN - 0957-0233 SN - 1361-6501 VL - 21 IS - 9 SP - 094023-1 - 094023-6 PB - IOP Publ. Ltd. CY - Bristol AN - OPUS4-22379 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -