TY - RPRT A1 - Holtappels, Kai A1 - Liebner, Christian A1 - Schröder, Volkmar A1 - Schildberg, H.-P. T1 - Report on experimentally determined explosion limits, explosion pressures and rates of explosion pressure rise - Part 1: methane, hydrogen and propylene; Contract No. EVG1-CT-2002-00072 KW - Explosion indices KW - Dependence of pressure KW - Temperature KW - Ignition energy and fuel content PY - 2006 UR - http://www.morechemistry.com/SAFEKINEX/deliverables/44.Del.%20No.%208.pdf IS - 8 SP - 1 EP - 149 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-12434 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gula, Michal A1 - Holtappels, Kai A1 - Schildberg, H.-P. T1 - Instabile Gase - Explosionstechnische Charakterisierung am Beispiel von Lachgas KW - Lachgas KW - Zerfall KW - Instabile Gase KW - Temperaturabhängigkeit KW - Explosion PY - 2007 U6 - https://doi.org/10.1002/cite.200750139 SN - 0009-286X SN - 1522-2640 VL - 79 IS - 9 SP - 1435 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-16076 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gula, Michal A1 - Holtappels, Kai A1 - Acikalin, Hatice Aydan A1 - Steinbach, J. A1 - Schildberg, H.-P. A1 - Kobiera, A. T1 - Zerfallsreaktionen chemisch instabiler Gase in Abhängigkeit vom Behältervolumen T2 - 9. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit", 6.-7.11.2008 CY - Köthen, Deutschland DA - 2008-11-06 KW - Lachgas KW - 1,2-Butadien KW - 1,3-Butadien KW - Zerfall KW - Volumenabhängigkeit PY - 2008 SN - 978-3-89746-099-7 SP - 1 EP - 14 PB - VDI, Hallescher Bezirksverein CY - Halle AN - OPUS4-18369 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gula, Michal A1 - Steinbach, J. A1 - Holtappels, Kai A1 - Acikalin, Hatice Aydan A1 - Schildberg, H.-P. A1 - Kobiera, A. T1 - Apparative Einflüsse auf den explosionsartigen Zerfall von chemisch instabilen Gasen T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2010-11-04 KW - Explosion KW - Chemisch instabil KW - Volumeneinfluss PY - 2010 SN - 978-3-89746-119-2 IS - P-16 SP - 1 EP - 9 CY - Frankfurt/M. AN - OPUS4-22540 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gula, M. A1 - Holtappels, Kai A1 - Acikalin, Hatice Aydan A1 - Grasse, Dennis A1 - Steinbach, J. A1 - Schildberg, H.-P. ED - Suter, G. ED - de Rademaeker, E. T1 - Explosion of chemically unstable gases in large vessels at elevated initial conditions T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 PY - 2010 SN - 978-90-76019-291 VL - 02 SP - 479 EP - 482 CY - Brugge, Belgium AN - OPUS4-21440 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Holtappels, Kai A1 - Schröder, Volkmar A1 - Pekalski, A. A1 - Schildberg, H.-P. A1 - Pasman, H.J. ED - Suter, G. ED - de Rademaeker, E. T1 - Process safety by oxygen monitoring T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 PY - 2010 SN - 978-90-76019-291 VL - 02 SP - 181 EP - 186 CY - Brugge, Belgium AN - OPUS4-21441 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schildberg, H.-P. A1 - Holtappels, Kai ED - Suter, G. ED - de Rademaeker, E. T1 - The course of explosions of CH4/O2/N2-mixtures in a 20 l sphere T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - Deflagration KW - Detonation KW - Explosion regions PY - 2010 SN - 978-90-76019-291 VL - 02 SP - 475 EP - 478 CY - Brugge, Belgium AN - OPUS4-21491 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Blanchard, R. A1 - Holtappels, Kai A1 - Kluge, Martin A1 - Schildberg, H.-P. A1 - Zeps, Robert ED - de Rademacher, E. ED - Schmelzer, P. T1 - Sizing of Explosion Pressure Relief using the Efflux Function N2 - Determination of deflagration venting requirements in chemical/process plants is usually carried out using well established standards employing an empirically based formula. However, this formula is shown to have severe shortcomings, especially in the range of low KG-values, where either negative or inconceivably large venting areas can be predicted. Due to these shortcomings a method has been developed using the efflux function for gases as a basis to predict the mass flow through a vent opening in a vessel during an internal explosion. The simulated rise in pressure due to the internal explosion is quantitatively determined from the KG-value, with the mass flow through the vent opening in the vessel resulting from the pressure difference between the vessel and its surroundings. This enables the maximum overpressure as a function of the pressure relief surface area to be predicted. The method takes into account the temperature of the efflux gases and turbulence enhancement brought about by the venting process. In the following paper explosion pressure relief experiments are described and the results from these experiments are compared to predictions from the efflux method. It is shown that by adjusting the assumed turbulence which evolves during the venting process, the reduced explosion pressure can be reasonably well reproduced. T2 - 15th International Symposium on Loss Prevention and Safety Promotion in the Process Industries and accompanying exhibition CY - Freiburg, Germany DA - 05.06.2016 KW - Deflagration KW - Explosion KW - Pressure relief KW - Venting KW - Efflux PY - 2016 SN - 978-88-95608-39-6 U6 - https://doi.org/10.3303/CET1648082 SN - 2283-9216 VL - 48 SP - 487 EP - 492 PB - AIDIC Servizi S.r.l CY - Milano, Italy AN - OPUS4-37918 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Holtappels, Kai A1 - Zeps, Robert A1 - Blanchard, R. A1 - Schildberg, H.-P. T1 - Sichere Auslegung von Druckentlastungenseinrichtungen - Warum eine Überarbeitung des Standards notwendig ist N2 - Der Einsatz von Druckentlastungseinrichtungen bietet bei sachgemäßer Auslegung eine sehr gute Variante, Behälter im Falle einer Explosion des im Innenraum vorhandenen Gasgemischs vor einer Zerstörung zu schützen. Die Auslegung von Druckentlastungseinrichtungen für Behälter erfolgt unter Anwendung verschiedener Standards und erfordert verschiedene Kenngrößen der involvierten explosionsfähigen Gasgemische. Diese werden jedoch in der Regel im Labormaßstab bestimmt und dann auf den Industriemaßstab übertragen. Viele Einflussgrößen und insbesondere die bei der Druckentlastung einsetzenden Turbulenzen werden nicht berücksichtigt. Fehldimensionierungen der Druckentlastungseinrichtungen sind möglich. In einer Forschungskooperation zwischen der BAM und der BASF AG werden experimentelle Daten für verschiedene Gassysteme im Technikumsmaßstab ermittelt, die später zur Validierung geeigneter Berechnungsmethoden verwendet werden sollen. Erste Ergebnisse werden vorgestellt. KW - Konstruktiver Explosionsschutz KW - Druckentlastung KW - Deflagrationen KW - Berstfolie PY - 2017 SN - 2191-0073 VL - 7 IS - 6 SP - 34 EP - 39 PB - Springer VDI Verlag CY - Düsseldorf AN - OPUS4-40552 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -