TY - JOUR A1 - Tjaden, B. A1 - Baum, K. A1 - Marquardt, V. A1 - Simon, M. A1 - Trajkovic-Arsic, M. A1 - Kouril, T. A1 - Siebers, B. A1 - Lisec, Jan A1 - Siveke, J. T. A1 - Schulte, J. H. A1 - Benary, U. A1 - Remke, M. A1 - Wolf, J. A1 - Schramm, A. T1 - MYCN-induced metabolic rewiring creates novel therapeutic vulnerabilities in neuroblastoma N2 - MYCN is a transcription factor that is aberrantly expressed in many tumor types and is often correlated with poor patient prognosis. Recently, several lines of evidence pointed to the fact that oncogenic activation of MYC family proteins is concomitant with reprogramming of tumor cells to cope with an enhanced need for metabolites during cell growth. These adaptions are driven by the ability of MYC proteins to act as transcriptional amplifiers in a tissue-of-origin specific manner. Here, we describe the effects of MYCN overexpression on metabolic reprogramming in neuroblastoma cells. Ectopic expression of MYCN induced a glycolytic switch that was concomitant with enhanced sensitivity towards 2-deoxyglucose, an inhibitor of glycolysis. Moreover, global metabolic profiling revealed extensive alterations in the cellular metabolome resulting from overexpression of MYCN. Limited supply with either of the two main carbon sources, glucose or glutamine, resulted in distinct shifts in steady-state metabolite levels and significant changes in glutathione metabolism. Interestingly, interference with glutamine-glutamate conversion preferentially blocked proliferation of MYCN overexpressing cells, when glutamine levels were reduced. Thus, our study uncovered MYCN induction and nutrient levels as important metabolic master switches in neuroblastoma cells and identified critical nodes that restrict tumor cell proliferation. KW - Mass-spectrometry KW - Tumor metabolism KW - MYCN PY - 2018 DO - https://doi.org/10.1101/423756 SP - 1 EP - 21 PB - Cold Spring Harbor Laboratory CY - Cold Spring Harbor, NY AN - OPUS4-46815 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bekemeier, Simon A1 - Caldeira Rêgo, C. R. A1 - Mai, H. L. A1 - Sikia, Ujjal A1 - Waseda, O. A1 - Apel, M. A1 - Arendt, F. A1 - Aschemann, A. A1 - Bayerlein, Bernd A1 - Courant, R. A1 - Dziwis, G. A1 - Fuchs, F. A1 - Giese, U. A1 - Junghanns, K. A1 - Kamal, M. A1 - Koschmieder, L. A1 - Leineweber, S. A1 - Luger, M. A1 - Lukas, M. A1 - Maas, J. A1 - Mertens, J. A1 - Mieller, Björn A1 - Overmeyer, L. A1 - Pirch, N. A1 - Reimann, J. A1 - Schröck, S. A1 - Schulze, P. A1 - Schuster, J. A1 - Seidel, A. A1 - Shchyglo, O. A1 - Sierka, M. A1 - Silze, F. A1 - Stier, S. A1 - Tegeler, M. A1 - Unger, Jörg F. A1 - Weber, M. A1 - Hickel, Tilmann A1 - Schaarschmidt, J. T1 - Advancing Digital Transformation in Material Science: The Role of Workflows Within the MaterialDigital Initiative N2 - The MaterialDigital initiative represents a major driver toward the digitalization of material science. Next to providing a prototypical infrastructure required for building a shared data space and working on semantic interoperability of data, a core focus area of the Platform MaterialDigital (PMD) is the utilization of workflows to encapsulate data processing and simulation steps in accordance with findable, accessible, interoperable, and reusable principles. In collaboration with the funded projects of the initiative, the workflow working group strives to establish shared standards, enhancing the interoperability and reusability of scientific data processing steps. Central to this effort is the Workflow Store, a pivotal tool for disseminating workflows with the community, facilitating the exchange and replication of scientific methodologies. This article discusses the inherent challenges of adapting workflow concepts, providing the perspective on developing and using workflows in the respective domain of the various funded projects. Additionally, it introduces the Workflow Store’s role within the initiative and outlines a future roadmap for the PMD workflow group, aiming to further refine and expand the role of scientific workflows as a means to advance digital transformation and foster collaborative research within material science. KW - Digitalisation KW - FAIR principles KW - MaterialDigital KW - Scientific workflows KW - Semantic interoperability PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-624088 DO - https://doi.org/10.1002/adem.202402149 SN - 1527-2648 IS - 2402149 SP - 1 EP - 25 PB - Wiley-VCH GmbH AN - OPUS4-62408 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Wöhlecke, Andreas A1 - Simon, Franz-Georg A1 - Biedermann, K. A1 - Bräcker, W. A1 - Engelmann, B. A1 - Zanzinger, H. T1 - Sind BAM-Zulassung und CE-Kennzeichnung im Wesentlichen gleichwertig? - Der Nachweis des Standes der Technik gemäß Deponieverordnung für Geotextilien und geotextilverwandte Produkte, Teil 2 N2 - Im ersten Teil dieses Aufsatzes wurde gezeigt, dass nur ein Teil der für den Deponiebau wesentlichen technischen Eigenschaften in den europäisch harmonisierten Bauproduktnormen DIN EN 13252 und DIN EN 13257, die der CE-Kennzeichnung der Geotextilien (GTX) und geotextilverwandten Produkte (GTP) zugrunde liegen, erfasst werden. Um eine im Wesentlichen vorhandene Gleichwertigkeit der Produkteigenschaften überhaupt abwägen zu können, müssen aber sämtliche relevanten Eigenschaften bekannt sein. Dies erfordert für CE-gekennzeichnete Produkte zusätzliche Prüfungen auf der Grundlage der DepV-Liste der Kriterien und Einwirkmechanismen (Anhang 1, Nummer 2.1.1, DepV). In diesem Teil werden die Tabellen C1 und C2 sowie die Tabelle D aus dem ersten Teil, in denen die Eigenschaften der harmonisierten europäischen Normen (hEN) den Anforderungen der DepV gegenübergestellt wurden, in technischer Hinsicht näher erläutert. N2 - A comparison of the harmonized technical specifications (in our case the harmonized European standards (hEN), namely DIN EN 13252 and DIN EN 13257), on which the CE-marking of geotextiles and geotextile-related products is based, with the German landfill ordinance (DepV) shows that only a few of the essential technical characteristics actually relevant for landfill constructions are considered in these standards. To be able to ponder about the equivalency of products with respect to their properties, all relevant properties have to be known. Therefore, additional tests based on the DepV-list of criteria and mechanisms of action (Annex 1, no. 2.1.1) are necessary for CE-marked products. This was discussed in the first part of this article. In this part, the tables C1, C2 and D of the first part, which listed and compared the requirements of the hEN and the DepV, are discussed in more technical details. KW - Deponieverordnung KW - BAM-Zulassung KW - Geokunststoffe KW - CE-Kennzeichnung PY - 2015 SN - 0027-2957 SN - 1863-9763 VL - 47 IS - 1 SP - 36 EP - 41 PB - Erich Schmidt CY - Berlin AN - OPUS4-32694 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Wöhlecke, Andreas A1 - Simon, Franz-Georg A1 - Biedermann, K. A1 - Bräcker, W. A1 - Engelmann, B. A1 - Zanzinger, H. T1 - Sind BAM-Zulassung und CE-Kennzeichnung im Wesentlichen gleichwertig - Der Nachweis des Standes der Technik gemäß Deponieverordnung für Geotextilien und geotextilverwandte Produkte, Teil 1 N2 - In absehbarer Zeit werden CE-gekennzeichnete Geovliesstoffe, Geogewebe, geosynthetische Dränelemente und Geogitter aus Kunststoff erhältlich sein, bei denen die CE-Leistungserklärung den Hinweis enthält 'dauerhaft für bis zu 100 Jahre' oder sogar 'dauerhaft für mindestens 100 Jahre'. Hersteller, Bauherren, Planer und zuständige Behörden werden sich daher die Frage stellen, ob diese Produkte auf der Grundlage von Anhang 1 Nummer 2.1 Satz 7 Ziffer 1 der Deponieverordnung (DepV) im Deponiebau auch ohne Zulassung verwendet werden dürfen. Ein Vergleich der europäisch harmonisierten Bauproduktnormen DIN EN 13252 und DIN EN 13257, die der CE-Kennzeichnung der Geotextilien und geotextilverwandten Produkte zugrunde liegen, mit den Anforderungen der DepV zeigt nun aber, dass nur ein Teil der für den Deponiebau wesentlichen technischen Eigenschaften in diesen Normen erfasst werden. Daher sind für CE gekennzeichnete Produkte zusätzliche Prüfungen auf der Grundlage der DepV-Liste der Kriterien und Einwirkmechanismen erforderlich. Die in den Produktnormen beschriebene Qualitätssicherung ist nach Anhang 1 Nummer 2 Satz 14 ff der DepV ebenfalls für die Gleichwertigkeit nicht ausreichend. Eine CE-Kennzeichnung ist deshalb noch kein Nachweis, dass die Produkte dem Stand der Technik nach der DepV entsprechen und die Eigenschaften der Produkte den geforderten Eigenschaften im Wesentlichen gleichwertig sind, auch wenn mit Bezug auf den Anhang B der genannten Normen deren Dauerhaftigkeit für 100 Jahre vom Hersteller deklariert wird.---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- In the near future, CE-marked woven and nonwoven geotextiles, geocomposite drains and geogrids will be available on the market, whose declaration of performance will contain the qualification 'predicted service life up to 100 years' or even 'predicted service life minimum 100 years'. Manufacturer, principals and their design engineers as well as the responsible authorities will have to deal with the question, whether such products can be used on the basis of Annex 1, no. 2.1, sentence 7, cipher 1 of the German landfill ordinance (DepV) as components of landfill liner and capping systems. A comparison of the harmonized European standards hEN 13252 and 13257, on which the CE-marking of geotextiles and geotextile-related products is based, with the DepV, shows that only a few of the essential technical characteristics actually relevant for landfill constructions are considered in these standards. Therefore, additional tests based on the DepV-list of criteria and mechanisms of action are necessary for CE-marked products. Requirements on quality managements in the hEN are likewise not adequate for essential equivalence with respect to annex 1, No. 2.1, sentence 14 ff, DepV. Therefore, CE-marking is actually no proof of the fulfilment of the state of the techno logy according to the DepV and of the essential equivalence of product properties to the required properties, albeit the declaration of performance indicates a predicted service life of 100 years. KW - Deponieverordnung KW - BAM-Zulassung KW - Geokunststoffe KW - CE-Kennzeichnung PY - 2014 SN - 0027-2957 SN - 1863-9763 VL - 46 IS - 12 SP - 680 EP - 688 PB - Erich Schmidt CY - Berlin AN - OPUS4-32466 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Keldenich, K. T1 - Abfallwirtschaft im Spannungsfeld zwischen thermischer Behandlung und Recycling T1 - Waste management between thermal treatment and recycling N2 - Die Abfallwirtschaft in Deutschland behandelt eine Menge von 359 Mio. Tonnen. Den größten Anteil haben Bau- und Abbruchabfälle mit 54%. Die Behandlungsverfahren dafür unterscheiden sich stark von denen für Siedlungsabfälle. Gemäß Europäischer Abfallrichtlinie ist Recycling gegenüber einer energetischen Verwertung in der Hierarchie der Abfallbehandlungsverfahren höher bewertet. Bei der thermischen Behandlung entscheidet die Energieeffizienz des Verfahrens, ob eine Behandlung als Verwertung oder Beseitigung gilt. Nach dieser Richtlinie erfolgt die Berechnung der Energieeffizienz stark vereinfacht mit der sogenannten R1-Formel. Veröffentlichte Daten zu Wärme- und Stromproduktion verschiedener thermischer Abfallbehandlungsanlagen werden mit der R1-Formel und Daten aus der Literatur verglichen. Mengen und Entsorgungswege sowie Möglichkeiten zur Bewertung von Abfallbehandlungsverfahren werden diskutiert. N2 - Waste management in Germany covers an amount of 359 million tons. The largest fraction is construction and demolition waste (C&D waste) with some 54%. The treatment processes for C&D waste differ from those for municipal solid waste. According to the European Directive on Waste a waste hierarchy shall apply where recycling has a higher priority than energy recovery. A thermal treatment is regarded as recovery operation only if the energy efficiency is above a certain limit. Under the terms of the directive a simplified calculation of the energy efficiency is perfomed using the so-called R1 formula. Published data on heat and power production of several thermal waste treatment plants are compared to the R1 formula and data from literature. Amount and waste management options for different waste fractions and how to evaluate different waste management processes are discussed. KW - Abfall KW - Energieeffizienz KW - Ersatzbrennstoffe KW - Kunststoffabfälle KW - Recycling(RC)-Baustoffe KW - Energy efficiency KW - Plastic waste KW - Recycled aggregates KW - Refuse derived fuels KW - Waste PY - 2012 DO - https://doi.org/10.1002/cite.201200005 SN - 0009-286X SN - 1522-2640 VL - 84 IS - 7 SP - 985 EP - 990 PB - Wiley-VCH CY - Weinheim AN - OPUS4-26210 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reiche, I. A1 - Muller, K. A1 - Alberic, M. A1 - Scharf, O. A1 - Wahning, A. A1 - Bjeoumikhov, A. A1 - Radtke, Martin A1 - Simon, R. T1 - Discovering vanished paints and naturally formed gold nanoparticles on 2800 years old Phoenician ivories using SR-FF-microXRF with the color X-ray camera N2 - Phoenician ivory objects (8th century B.C., Syria) from the collections of the Badisches Landesmuseum, Karlsruhe, Germany, have been studied with full field X-ray fluorescence microimaging, using synchrotron radiation (SR-FF-microXRF). The innovative Color X-ray Camera (CXC), a full-field detection device (SLcam), was used at the X-ray fluorescence beamline of the ANKA synchrotron facility (ANKA-FLUO, KIT, Karlsruhe, Germany) to noninvasively study trace metal distributions at the surface of the archeological ivory objects. The outstanding strength of the imaging technique with the CXC is the capability to record the full XRF spectrum with a spatial resolution of 48 µm on a zone of a size of 11.9 × 12.3 mm² (264 × 264 pixels). For each analyzed region, 69696 spectra were simultaneously recorded. The principal elements detected are P, Ca, and Sr, coming from the ivory material itself; Cu, characteristic of pigments; Fe and Pb, representing sediments or pigments; Mn, revealing deposited soil minerals; Ti, indicating restoration processes or correlated with Fe sediment traces; and Au, linked to a former gilding. This provides essential information for the assessment of the original appearance of the ivory carvings. The determined elemental maps specific of possible pigments are superimposed on one another to visualize their respective distributions and reconstruct the original polychromy and gilding. Reliable hypotheses for the reconstruction of the original polychromy of the carved ivories are postulated on this basis. KW - SR-FF-microXRF KW - Elemental imaging KW - Ivory KW - Paints KW - Au NPs KW - Egyptian blue KW - Fe PY - 2013 DO - https://doi.org/10.1021/ac4006167 SN - 0003-2700 SN - 1520-6882 VL - 85 IS - 12 SP - 5857 EP - 5866 PB - American Chemical Society CY - Washington, DC AN - OPUS4-30222 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rauwolf, M. A1 - Turyanskaya, A. A1 - Roschger, A. A1 - Prost, J. A1 - Simon, R. A1 - Scharf, O. A1 - Radtke, Martin A1 - Schoonjans, Tom A1 - de Oliveira Guilherme Buzanich, Ana A1 - Klaushofer, K. A1 - Wobrauschek, P. A1 - Hofstaetter, J. G. A1 - Roschger, P. A1 - Streli, C. T1 - Synchrotron radiation micro X-ray fluorescence spectroscopy of thin structures in bone samples: comparison of confocal and color X-ray camera setups N2 - In the quest for finding the ideal synchrotron-radiation-induced imaging method for the investigation of trace element distributions in human bone samples, experiments were performed using both a scanning confocal synchrotron radiation micro X-ray fluorescence (SR-mXRF) (FLUO beamline at ANKA) setup and a full-field color X-ray camera (BAMline at BESSY-II) setup. As zinc is a trace element of special interest in bone, the setups were optimized for its detection. The setups were compared with respect to count rate, required measurement time and spatial resolution. It was demonstrated that the ideal method depends on the element of interest. Although for Ca (a major constituent of the bone with a low energy of 3.69 keV for its K alpha XRF line) the color X-ray camera provided a higher resolution in the plane, for Zn (a trace element in bone) only the confocal SR-µXRF setup was able to sufficiently image the distribution. KW - Synchrotron KW - BAMline KW - BESSY KW - XRF KW - X-ray Color Camera PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-391944 DO - https://doi.org/10.1107/S1600577516017057 SN - 1600-5775 VL - 24 SP - 307 EP - 311 PB - International Union of Crystallography AN - OPUS4-39194 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Meggyes, Tamás A1 - Csövári, M. A1 - Roehl, K.E. A1 - Simon, Franz-Georg T1 - Enhancing the efficacy of permeable reactive barriers KW - Ageing KW - Degradation KW - Electrokinetic curtains KW - Groundwater KW - Groundwater contamination KW - Hydroxyapatite KW - Iron KW - Long-term behaviour KW - Passive groundwater remediation KW - Permeable reactive barrier KW - Precipitation KW - Selective sorption KW - Sorption KW - Uranium PY - 2009 DO - https://doi.org/10.2462/09670513.964 SN - 0967-0513 VL - 17 IS - 3-4 SP - 635 EP - 650 PB - EPP Publ. CY - Richmond AN - OPUS4-20922 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -