TY - JOUR A1 - Klimakow, Maria A1 - Rademann, K. A1 - Emmerling, Franziska T1 - Towards novel pseudo-polymorphs of nifedipine: elucidation of a slow crystallization process JF - Crystal growth & design N2 - The crystallization of nifedipine was studied by means of synchrotron-X-ray diffraction, single-crystal X-ray structural analysis, and Raman spectroscopy. The results of slow evaporation (24 h in minimum) using dimethyl sulfoxide (DMSO) are presented. Since fast crystallization processes (typically minutes) in different solvents always led to the final formation of the thermodynamically most stable α-polymorph of nifedipine, we observed a novel pseudo-polymorph due to slow crystallization from DMSO. The single-crystal X-ray structure of the solvated species nifedipine·DMSO (1:1) is reported for the first time. In addition, the crystallization process on surfaces was followed by means of light microscopy and environmental scanning electron microscopy (ESEM) coupled with energy-dispersive X-ray spectroscopy (EDS) analysis. Different diffractions pattern and Raman spectra were observed for crystals grown from stock solution and those obtained by drying the solution on soda lime silicate surfaces. KW - Synchrotron radiation KW - Polymorphism KW - Crystallization KW - Nifedipine PY - 2010 DO - https://doi.org/10.1021/cg100186v SN - 1528-7483 VL - 10 IS - 6 SP - 2693 EP - 2698 PB - American Chemical Society CY - Washington, DC, USA AN - OPUS4-21398 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Klimakow, Maria A1 - Klobes, Peter A1 - Thünemann, Andreas A1 - Rademann, K. A1 - Emmerling, Franziska T1 - Mechanochemical synthesis of metal-organic frameworks: A fast and facile approach toward quantitative yields and high specific surface areas JF - Chemistry of materials N2 - The strategy of utilizing mechanochemical synthesis to obtain metal–organic frameworks (MOFs) with high surface areas is demonstrated for two model systems. The compounds HKUST-1 (Cu3(BTC)2, BTC = 1,3,5-benzenetricarboxylate) and MOF-14 (Cu3(BTB)2, BTB = 4,4',4''-benzenetribenzoate) were synthesized by ball milling and characterized by powder X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM) and thermal analysis (DTA/DTG/MS). The specific surface area (SSA) of both compounds was characterized by nitrogen adsorption. To verify these results and to understand how the synthetic conditions influence the pore structure and the surface area, additional small-angle X-ray scattering (SAXS) experiments were carried out. Our investigations confirm that this synthesis approach is a promising alternative method for distinct MOFs. This facile method leads to materials with surface areas of 1713 m²/g, which is comparable to the highest given values in the literature for the respective compounds. KW - Metal-organic frameworks KW - Mechanochemistry KW - Green-chemistry synthesis KW - Gas adsorption KW - SAXS KW - Specific surface area PY - 2010 DO - https://doi.org/10.1021/cm1012119 SN - 0897-4756 SN - 1520-5002 VL - 22 IS - 18 SP - 5216 EP - 5221 PB - American Chemical Society CY - Washington, DC AN - OPUS4-21999 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Klimakow, Maria A1 - Leiterer, Jork A1 - Kneipp, Janina A1 - Rössler, E. A1 - Panne, Ulrich A1 - Rademann, K. A1 - Emmerling, Franziska T1 - Combined synchrotron XRD/Raman measurements: In situ identification of polymorphic transitions during crystallization processes JF - Langmuir N2 - A combination of two analytical methods, time-resolved X-ray diffraction (XRD) and Raman spectroscopy, is presented as a novel tool for crystallization studies. An acoustic levitator was employed as sample environment. This setup enables the acquisition of XRD and Raman data in situ simultaneously within a 20 s period and hence permits investigation of polymorphic phase transitions during the crystallization process in different solvents (methanol, ethanol, acetone, dichloromethane, acetonitrile). These real time measurements allow the determination of the phase content from the onset of the first crystalline molecular assemblies to the stable system. To evaluate the capability of this approach, the setup was applied to elucidate the crystallization process of the polymorphic compound nifedipine. The results indicate the existence of solvent-dependent transient phases during the crystallization process. The quality of the data allowed the assignment of the lattice constants of the hitherto unknown crystal structure of the β-polymorph. KW - Synchrotron radiation KW - XRD KW - Raman spectroscopy KW - Polymorphism KW - Crystallization KW - Acoustic levitation KW - Nifedipine PY - 2010 DO - https://doi.org/10.1021/la100540q SN - 0743-7463 SN - 1520-5827 VL - 26 IS - 13 SP - 11233 EP - 11237 PB - American Chemical Society CY - Washington, DC AN - OPUS4-21396 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Polte, Jörg A1 - Erler, Robert A1 - Thünemann, Andreas A1 - Sokolov, S. A1 - Ahner, T. T. A1 - Rademann, K. A1 - Emmerling, Franziska A1 - Kraehnert, R. T1 - Nucleation and growth of gold nanoparticles studies via in situ small angle X-ray scattering at millisecond time resolution JF - ACS nano N2 - Gold nanoparticles (AuNP) were prepared by the homogeneous mixing of continuous flows of an aqueous tetrachloroauric acid solution and a sodium borohydride solution applying a microstructured static mixer. The online characterization and screening of this fast process (~2 s) was enabled by coupling a micromixer operating in continuous-flow mode with a conventional in-house small angle X-ray scattering (SAXS) setup. This online characterization technique enables the time-resolved investigation of the growth process of the nanoparticles from an average radius of ca. 0.8 nm to about 2 nm. To the best of our knowledge, this is the first demonstration of a continuous-flow SAXS setup for time-resolved studies of nanoparticle formation mechanisms that does not require the use of synchrotron facilities. In combination with X-ray absorption near edge structure microscopy, scanning electron microscopy, and UV-vis spectroscopy the obtained data allow the deduction of a two-step mechanism of gold nanoparticle formation. The first step is a rapid conversion of the ionic gold precursor into metallic gold nuclei, followed by particle growth via coalescence of smaller entities. Consequently it could be shown that the studied synthesis serves as a model system for growth driven only by coalescence processes. KW - Nanoparticle formation mechanism KW - SAXS KW - Microstructured static mixer KW - Continuous flow PY - 2010 DO - https://doi.org/10.1021/nn901499c SN - 1936-0851 VL - 4 IS - 2 SP - 1076 EP - 1082 PB - ACS Publ. CY - Washington, DC, USA AN - OPUS4-20940 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -