TY - RPRT A1 - Brandes, E. A1 - Colson, B. A1 - Frost, K. A1 - Lüth, Peter A1 - Simon, K. A1 - Stolz, T. A1 - Uhlig, S. T1 - Evaluation of the interlaboratory test 2015 – 2016 on the method UN Test L.2 “Sustained combustibility test” / EN ISO 9038:2013 “Determination of sustained combustibility of liquids" N2 - The test methods UN Test L.2 / EN ISO 9038:2013 DIN EN 15188:2007 are applied to characterize the sustained combustibility of liquids i.e. the behaviour of a material under specified test conditions, whereby its vapour can be ignited by an ignition source and sufficient flammable vapour is produced to continue burning for at least 15 s after the source of ignition has been removed. The aims of this interlaboratory test (IT) are the verification and/or the improvement (if necessary) of the verification data (reference material) in Annex B of EN ISO 9038:2013, the assessment of influencing (disturbing) factors (laboratory specific factors, which possibly may have an influence on the test result) and the assessment of the performance of the participating laboratories. It could be demonstrated that the reference materials n-Dodecane, n-Decane and n-Undecane as mentioned in the standard are suitable and the verification shall continue to be valid. Sustained combustibility tests are influenced by several factors like the presence of a draught shield, the experience of the laboratory assistant, verification of the apparatus, calibration of the metering device. Based on the interlaboratory test, the gained experience and the actual results, well-founded measures / actions can be recommended to improve execution of the method. The IT was organized by PTB, BAM and QuoData GmbH in the framework of the co-operation project CEQAT-DGHS Centre for Quality Assurance for Testing of Dangerous Goods and Hazardous Substances. KW - Dangerous goods KW - Hazardous substances KW - Test method KW - Quality assurance KW - Interlaboratory comparison KW - Round robin test KW - Validation KW - Sustained combustibility KW - Reference material KW - Gefahrgut KW - Gefahrstoff KW - Prüfmethode KW - Qualitätssicherung KW - Ringversuch KW - Validierung KW - Selbstunterhaltende Verbrennung KW - Referenzmaterial PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-410270 SN - 978-3-9818270-3-3 SP - 1 EP - 103 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-41027 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Colson, K. A1 - Schönberger, T. T1 - The q in NMR – a review of recent international activities N2 - Quantitative NMR Spectroscopy (qNMR) provides the most universally applicable form of direct purity determination without need for reference materials of impurities or the calculation of response factors for all samples exhibiting suitable NMR properties. Broadly accepted validation methods of qNMR spectroscopy gives users tools to exploit qNMR more easily and enables rapid analytical method development and reduce time and financial burdens. The first initiative towards a worldwide agreement goes back to a panel discussion at PANIC 2014 (Practical Applications of NMR in Industry Conference) in Chicago. Since that time, the Validation Workshop takes place each year following the PANIC Conference, last in 2017 with a turnout of over 65 people. The group aims to identifying a network of NMR people concerned with validation that can ultimately assist each other through the validation process, harmonize the terminology and a standard approach for NMR validations and position the guidelines produced by consensus of the NMR community so that accreditation agencies can use this process. The talk briefly summarises the outcome of the former PANIC Validation Workshops (2015, 2016, and 2017) as well as the recent satellite meetings including the qNMR meeting held at Spectral Service in Cologne, Germany (June 2016), a validation workshop at SMASH (La Jolla, USA, September 2016), the qNMR Summit with USP in Rockville, USA (October 2016), the qNMR Summit at BAM in Berlin, Germany (March 2017), and the qNMR Minisymposium at SMASH in Baveno, Italy (September 2017). Upcoming activities will be a qNMR Summit held by JP and JEOL in Tokyo, Japan (January 29th-30th, 2018) and a qNMR Summit at the University of Würzburg, Germany (planned for October 2018). The next PANIC takes place March 4th-8th, 2018 in La Jolla (San Diego), CA, USA. Further Information can be found under: http://www.validnmr.com T2 - qNMR Day CY - Politecnico di Bari, Bari, Italy DA - 24.11.2017 KW - qNMR KW - Quantitative NMR Spectroscopy KW - NMR validation KW - qNMR Summit KW - Direct purity determination PY - 2017 UR - http://www.gidrm.org/index.php/activities/workshops/2017-workshops/qnmr-day-a-gidrm-organized-in-cooperation-with-girm AN - OPUS4-43118 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -