TY - JOUR A1 - Krause, Martin A1 - Mayer, K. A1 - Chinta, P.K. A1 - Effner, Ute T1 - Ultrasonic imaging of defects in building elements made from timber N2 - There is a great demand for non-destructive testing methods for quality assurance and to assess the safety and durability of wooden structures. Ultrasonic echo technique with shear waves in the frequency range of 50 kHz is one of those promising methods and is already frequently applied for usual and glued laminated timber. The article describes the development and first results for an imaging method for this purpose. The highly anisotropic properties of the ultrasonic velocity have to be considered. A 3D-SAFT (Synthetic Aperture Focusing Technique) imaging scheme is developed initially for synthetic data resulting from modelling the elastic wave propagation. The main part of the paper describes the experimental validation of this evaluation technique by experimental studies applying automated ultrasonic scanning techniques. 3D ultrasonic imaging results are described for test specimens made from pine and spruce wood. Another object of investigation was a pedestrian bridge made from siberian larch. KW - Ultrasonic echo KW - Imaging KW - SAFT reconstruction calculation KW - Anisotropic wave propagation KW - EFIT modelling KW - Glued-laminated timber (glulam) PY - 2013 DO - https://doi.org/10.4028/www.scientific.net/AMR.778.312 SN - 1022-6680 SN - 1662-8985 VL - 778 SP - 312 EP - 320 PB - Trans Tech Publ. CY - Zurich AN - OPUS4-29088 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Burkert, Andreas A1 - Ebell, Gino A1 - Eichler, T. A1 - Hariri, K. A1 - Harnisch, J. A1 - Keßler, S. A1 - Mayer, T.F. A1 - Meier, J. A1 - Mietz, Jürgen A1 - Reichling, K. A1 - Sodeikat, C. T1 - Merkblatt B 03 - Merkblatt für Elektrochemische Potentialmessungen zur Detektion von Bewehrungsstahlkorrosion N2 - Dieses Merkblatt beschreibt die Anwendung elektrochemischer Potentialmessungen (häufig auch als Potentialfeldmessung bezeichnet) zur Detektion von Bewehrungsstahlkorrosion an Stahlbetonbauwerken. Mit Hilfe dieses Verfahrens können Bereiche korrodierender Bewehrung zerstörungsfrei lokalisiert werden. In der Regel kommt diese Messmethode bei der Detektion chloridinduzierter Korrosion zum Einsatz. In Abgrenzung hierzu sollte die Abschätzung der Gefahr einer karbonatisierungsinduzierten Korrosion durch Bestimmung der Karbonatisierungstiefe und der Betondeckung erfolgen. KW - Korrosion KW - Betonstahl KW - Chloridinduzierte Korrosion KW - Potentialfeldmessung PY - 2014 SN - 978-3-940283-10-8 SP - 1 EP - 19 CY - Berlin ET - Überarbeitete Ausgabe April 2014 AN - OPUS4-31518 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ballier, G. A1 - Mayer, K. A1 - Langenberg, K.-J. A1 - Schulze, Sebastian A1 - Krause, Martin T1 - Improvement on tendon duct examination by modelling and imaging with synthetic aperture and one-way inverse methods N2 - The knowledge of the internal structure of tendon ducts is one of the important preconditions to make predictions about the stableness and the lifetime of concrete buildings – specifically concrete bridges. Ultrasonic NDT methods can be used to have a look inside those components. To understand the complex effects resulting from elastic wave propagation, it is important to build test specimens and to analyze the measurements with the aid of modelling. At BAM (German Federal Institute for Materials Research and Testing) a new specimen is under construction to realize some of the most common geometrical structures which can be expected in the field of tendon duct testing in concrete bridges. We present various measurement concepts and a comparison between measurement and modelling with EFIT (Elastic Finite Integration Technique), as well as results of imaging methods based on conventional SAFT (Synthetic Aperture Focusing Technique) or FT-SAFT (SAFT with Fourier Techniques) together with phase evaluation. In addition we will present the results of time reversal using AFIT (Acoustic Finite Integration Technique) and a one-way wave propagation method to improve the imaging. T2 - 18th WCNDT - World conference on nondestructive testing CY - Durban, South Africa DA - 16.04.2012 KW - SAFT KW - Ultrasonic NDT KW - Concrete KW - One way KW - AFIT KW - Time reversal PY - 2012 SN - 978-0-620-52872-6 SP - 1 EP - 8 AN - OPUS4-35102 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Burkert, Andreas A1 - Ebell, Gino A1 - Eichler, T. A1 - Hariri, K. A1 - Harnisch, J. A1 - Keßler, S. A1 - Mayer, T. A1 - Meier, J. A1 - Mietz, Jürgen A1 - Reichling, K. A1 - Sodeikat, C. T1 - Electrochemical half-cell potential measurements for the detection of reinforcement corrosion N2 - This specification describes the application of electrochemical half‐cell potential measurements (frequently also called potential mapping) for the detection of reinforcement corrosion in reinforced concrete structures. Areas of corroding reinforcement steel can be located in a nondestructive manner by means of this procedure. Half‐cell potential measurements are used in order to detect chloride‐induced corrosion. However, it is not recommended in order to assess the risk of carbonation‐induced corrosion. For this purpose the determination of the carbonation depth and the concrete cover appear to be more appropriate. The content of this specification exclusively refers to the application of mobile, local variable reference electrodes, which are only placed on the concrete surface while measuring. The technique distinguishes itself thereby from the range of corrosion monitoring systems with stationary installed reference electrodes and sensor systems, respectively, whereby it is possible to continuously track measurements within the area of the installed electrodes. However, these methods are not dealt with in this specification. KW - Monitoring KW - Corrosion KW - Reinforcement PY - 2014 SN - 978-3-940283-72-6 SP - B 03, 1 EP - 19 PB - DGZfP CY - Berlin AN - OPUS4-40419 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Ballach, F. A1 - Bartscher, M. A1 - Bellon, Carsten A1 - Borges de Oliveira, F. A1 - Braun, M. A1 - Dennerlein, F. A1 - Flessner, M. A1 - Fuchs, P. A1 - Günnewig, O. A1 - Hausotte, T. A1 - Hess, J. A1 - Kasperl, S. A1 - Kirschbaum, K. A1 - Li, K. A1 - Maass, N. A1 - Mayer, T. A1 - Orth, Anthony A1 - Reuter, T. A1 - Suppes, A. A1 - von Schmid, M. A1 - Weiß, D. T1 - Realistische Simulation realer Röntgencomputertomografie-Systeme mit basisqualifizierter Simulationssoftware – CTSimU2 BT - Abschlussbericht N2 - Das Förderprojekt CTSimU2 baute auf den Ergebnissen des Projektes CTSimU auf. Dieses Vorprojekt erarbeitete ein (Basis-)Qualifizierungsframework für Simulationssoftwares zur Anwendung bei der Röntgen-CT für dimensionelle Messungen. Dabei stand die ausreichende physikalische Korrektheit der Durchstrahlungssimulation im Vordergrund. Für die realitätsnahe Simulation einer CT-Anlage in einer Simulationssoftware (Digitales Modell) ist jedoch nicht nur die Korrektheit der Simulationssoftware selbst, sondern auch die Güte der Parametrisierung des realen CT-Systems in der Simulationssoftware entscheidend – dies stellte den Ausgangspunkt dar. Die Parametrisierung eines CT-Systems in einer Simulationssoftware lässt sich in vier Schritte unterteilen: nach der Datenaufnahme am realen CT-System folgt die Auswertung der aufgenommenen Daten für die Generierung allgemeiner Parameterangaben. Als letztes folgte die Übertragung der Parameter in die spezifischen Simulationssoftwares und die Validierung der resultierenden Simulationsparameter. Die Methodik der Datenaufnahme am CT und die Auswertung der Daten wurde in einem Werkzeugkasten allgemein beschrieben. Der dritte Schritt, die Umsetzung der Parameter, war softwarespezifisch und wurde beispielhaft mit den vorhandenen Simulationssoftwares durchgeführt. Die Validierung der Parameter war standardisierbar und konnte durch den entwickelten Test geleistet werden, auf dessen Basis die ausreichend korrekte Simulation einer realen Anlage beurteilt werden konnte. Endresultat des Projektes war ein Richtlinienentwurf (z. B. VDI/VDE 2630) zu diesem Test, der einen informativen Annex zum Stand der Technik bezüglich der Möglichkeiten zur Parameterbestimmung enthält. Mit einer Simulationssoftware, die die Basisqualifizierung aus CTSimU bestanden hat und einen Parameterdatensatz für ein reales CT-System enthält, der den Test aus CTSimU2 bestanden hat, können realistische Simulationen dieses CT-Systems möglich sein. KW - Computertomografie KW - Simulation KW - Dimensionelles Messen PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-641719 DO - https://doi.org/10.34657/21602 N1 - Dieses Projekt wurde durch die Förderrichtlinie WIPANO gefördert und durch das Bundesministerium für Wirtschaft und Klimaschutz (2022 -2025) finanziert. Der Projektträger Jülich verwaltet die Projekte der Förderrichtlinie WIPANO. SP - 1 EP - 22 PB - TIB Technische Informationsbibliothek CY - Hannover AN - OPUS4-64171 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mayer, U. A1 - Böhme, W. A1 - Borsutzki, M. A1 - Häcker, Ralf A1 - Schneider, K. A1 - Düpmeier, T. A1 - Tobisch, M. A1 - Kudliczka, H. A1 - Neuhaus, R. A1 - Ruifrok, R. A1 - Cotinaut, L. A1 - Höfemann, M. ED - Frenz, H. ED - Grellmann, W. T1 - Ergebnisse eines VDEh-Ringversuchs zum Stahl-Eisen-Prüfblatt "Hochgeschwindigkeitszugversuche an gefügten Stählen" T2 - Tagung Werkstoffprüfung 2008 CY - Berlin, Germany DA - 2008-12-04 KW - Hochgeschwindigkeitszugversuch KW - Fügestellen KW - Kennwerte für Crashsimulation KW - Scherzugversuch KW - Ringversuch KW - High rate tension test KW - Joints KW - Properties for crash simulation KW - Shear tension test KW - Round robin PY - 2008 SN - 978-3-00-026399-6 SN - 1861-8154 SP - 161 EP - 166 AN - OPUS4-33405 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Mayer, K. A1 - Effner, Ute T1 - Ultrasonic echo methods for structural timber N2 - Ultrasonic echo technique with shear waves in the frequency rang of 50 kHz is one of the promising methods for assessment of structural timber and is already frequently applied for this purpose. The article summarizes the state of the art of applying echo measurement via linear measurements as well as the development and first results for an imaging method for this purpose. The highly anisotropic properties of the ultrasonic velocity have to be considered. 3 D ultrasonic imaging results are described for the example of a pedestrian bridge made from Siberian larch. T2 - COST Workshop - Highly performing timber structures: Reliability, assessment, monitoring and strengthening CY - Biel, Switzerland DA - 23.09.2014 KW - Ultrasonic echo KW - SAFT reconstruction calculation KW - Glued-laminated timber (glulam) KW - Footbridge KW - Ultraschallecho KW - SAFT KW - Brettschichtholz PY - 2014 SN - 978-3-9523787-3-1 SP - 77 EP - 82 PB - Bern University of Applied Sciences CY - Bern AN - OPUS4-35179 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulze, S. A1 - Krause, Martin A1 - Mayer, K. A1 - Redmer, Bernhard A1 - Wiggenhauser, Herbert T1 - Grouting defects localized by ultrasonic testing including phase evaluation N2 - Grouting defects, e.g. in post-tensioned structures or piped anchors may be identified by ultrasonic imaging. Since several years experiences are carried out with false color displayed phase values, which enable distinct localization of ungrouted regions. In this contribution we report on progress in localizing grouting defects in tendon ducts, when they are only partly grouted and the unfilled part is not orientated into the direction of the measuring surface. This is frequently the case e.g. for box girder structures. Düring the project specimens containing different types of grouting faults are investigated in Order to optimize measuring and evaluation techniques. A handheld linear array System (commercially available) is applied for fast 2D-measurement and subsequent phase sensitive 3D-imaging (new Software development). In a large concrete wall specimen tendon ducts and real prestressing Systems containing grouting defects were built in. The ducts are partly covered by non prestressed reinforcement bars in order to investigate its disturbing influence. These included objects were investigated afterwards with the described methods. We report on large area measuring results, which were partly verified by y-radiography. In the frame of practical application results of measuring the position and extend of a blockade within a posttensioned structure are presen ted. T2 - SMT 2014 - NDE/NDT for highways and bridges - Structural materials technology CY - Washington, DC, USA DA - 25.08.2014 KW - Ultraschallecho-Verfahren KW - Spannbeton KW - Phasenauswertung PY - 2014 SN - 978-1-57117-342-3 SP - 321 EP - 328 AN - OPUS4-32846 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ballier, G. A1 - Mayer, K. A1 - Krause, Martin T1 - Ultraschallabbildung zur zerstörungsfreien Strukturbestimmung von Betonbauteilen mit Hilfe der "One-Way"-Wellengleichung N2 - Die ZfP versucht mit Hilfe von Messdaten, die sie aus z. B. einer Impuls-Echo-Messung gewinnt, Rückschlüsse auf die innere Struktur eines Objektes zu ziehen. Bei Betonbauteilen sollen im Besonderen Verpressfehler, die dann zur Korrosion und damit zur einer Beeinträchtigung der Standsicherheit und Dauerhaftigkeit des Konstruktion (z. B. einer Spannbetonbrücke) führen können, schnell und mit einer hohen Sicherheit aus den Messdaten lokalisiert werden. Das konventionellen SAFT oder FT-SAFT-Verfahren liefern in Verbindung mit einer Phasenauswertung einen schnellen und sicheren Hinweis darauf, dass ein Lufteinschluss/Defekt vorliegt. Darüber hinaus können jedoch Rückausbreitungs-Verfahren, wenn ein gutes Geschwindigkeitsprofil vorliegt, eine wesentlich bessere Lokalisierung des Defekts bieten als SAFT-Verfahren, jedoch mit dem Nachteil, dass sie sehr zeit- und rechenintensiv sind, vor allem im Dreidimensionalen. Als Mittelweg kann hierzu die "One-Way"-Methode dienen. Diese Methode verwendet Pseudo-Differential-Operatoren und ist sehr robust auch bei relativ groben Geschwindigkeitsprofilen. Sie wird an Beispielen aus der Bauwerkdiagnose mit den konventionellen Verfahren verglichen. T2 - DGZfP-Jahrestagung 2011 CY - Bremen, Germany DA - 30.05.2011 KW - Ultraschallecho-Verfahren KW - Betonbauteile KW - Modellierung PY - 2011 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-328714 SN - 978-3-940283-33-7 SP - Poster 66, 1 EP - 8 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) AN - OPUS4-32871 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schulze, S. A1 - Mayer, K. A1 - Krause, Martin T1 - Spannbetonuntersuchung mit bildgebenden Ultraschallecho-Verfahren N2 - Beim Einsatz von Ultraschallecho-Methoden in der zerstörungsfreien Prüfung im Bauwesen stellt die Untersuchung von Spannbetonkonstruktionen eine der anspruchsvollsten Aufgaben für Wissenschaft und Technik dar. Das inhomogene Gefüge aus Beton, schlaffer Bewehrung und – aus Hüllrohr, Spannlitzen und Verpressmörtel bestehenden – Spanngliedern erfordert eine Optimierung von Messtechnik und Auswertesoftware, um verwertbare Aussagen zum Verpresszustand der Hüllrohre zu erhalten. Der vorliegende Beitrag beschreibt die Grundlagen der bildgebenden Darstellung von US-Echo-Daten, die Untersuchung und Datenauswertung an Probekörpern sowie ein Fallbeispiel aus der Praxis. Dabei erweist sich insbesondere die Phasenauswertung zur qualitativen Unterscheidung von Reflektoren als nützlich. Das Prinzip wird erläutert, und es werden Teile eines interaktiven, auf der SAFT-Methode basierenden Softwarepakets vorgestellt. Mit dieser Software können die großflächig gewonnenen Ultraschalldaten auf herkömmlichen PCs oder mobilen Computern zu zwei- und dreidimensionalen Rekonstruktionen berechnet, analysiert und visualisiert werden. Ausgewertet wurden Daten, die mit automatisierten Messsystemen an kleinformatigen Laborprobekörpern und großen Testwänden gewonnen wurden. Im Rahmen der praktischen Anwendung konnten unter Verwendung der vorgestellten Verfahren an einem Spannglied die Lage eines Hüllrohrverstopfers lokalisiert und die Ausdehnung der Blockadestelle eingegrenzt werden.---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Investigation of prestressed concrete using the imaging ultrasonic echo method – Application of phase evaluation for the distinction of reflectors: The application of ultrasound methods for the non-destructive assessment of pre-stressed concrete members is one of the biggest challenges in the field of non-destructive testing in civil engineering. The inhomogeneous composition of concrete, reinforcement and tendons, which itself consist of ducts, steel wires and grouting material, requires an optimisation of measuring technique and analysis software to gain reliable information about the grouting condition of the ducts. This article describes the fundamentals of the visualisation of ultrasound echo data, the investigation and data analysis at specimen and a case study. Here especially the phase evaluation proves to be very useful for the distinction of reflectors. The basic principle is explained and parts of an interactive software module, which is based on the SAFT method, is presented. With this software it is possible to calculate, analyse and visualise 2D and 3D reconstructions of large ultrasound data sets with conventional PCs or mobile computers. Data has been analysed, which were recorded with automatic measurement systems at small scale laboratory specimens and a large scale testing wall. In the frame of the practical application it was possible to localise the position and extent of a blockade within a duct. KW - Ultraschallecho KW - Zerstörungsfreie Prüfung im Bauwesen KW - ZfPBau KW - Ultraschallecho-Methode KW - Bildgebende Auswertung KW - SAFT-Rekonstruktion KW - Phasenauswertung KW - Spannbeton KW - Verpresszustand KW - Rekonstruktionssoftware KW - Non-destructive testing in civil engineering (NDT-CE) KW - Ultrasound echo method KW - Imaging methods KW - SAFT reconstruction KW - Phase evaluation KW - Pre-stressed concrete KW - Grouting condition KW - Reconstruction software KW - Bauwerkserhaltung/Sanierung PY - 2013 DO - https://doi.org/10.1002/best.201300062 SN - 0005-9900 SN - 1437-1006 VL - 108 IS - 12 SP - 845 EP - 853 PB - Ernst CY - Berlin AN - OPUS4-29838 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wiggenhauser, Herbert A1 - Samokrutov, A A1 - Mayer, K A1 - Krause, Martin A1 - Alekhin, S. G. A1 - Elkin, V T1 - Large aperture ultrasonic system for testing thick concrete structures N2 - A Large Aperture UltraSonic system (LAUS) has been designed and built for testing thick concrete structures. The scalable system consists of twelve ultrasonic units, each hosting 32 individual shear wave transducers with mechanical dry point contact (DPC) to the concrete surface. The twelve units are attached to the concrete surface using a vacuum case which holds them in place during operation. Each LAUS unit can be placed individually on the surface to achieve optimal ultrasonic condition, e.g. to avoid rebars. For the generation of vacuum, air pressure is supplied to each unit through an air hose. The twelve units define an aperture which is necessary for fast reconstruction of the subsurface structure. The well-known SAFT (Synthetic Aperture Focusing Technique) algorithm has been adopted to this situation, where the individual LAUS units form a linear aperture with not necessarily equidistant spacing between the units. The exact geometrical position of the units, which are individually marked with retroreflective labels, is determined using photographs and image processing. All transducers are synchronized and work either as transmitter or receiver. A full scan consists of 12 * 11 recordings, where each unit acts as transmitter once and all others as receivers. An electronic sub-unit on the back of the ultrasonic device holds the battery and handles data acquisition, synchronization and data communication. A computer is used as base unit which communicates with each LAUS unit for control and data acquisition, the synchronization is performed by a radio modem that uses a special algorithm similar to a digital PLL (phase locked loop). No wire connections are necessary between the units and the base system. The LAUS system is designed to investigate concrete structures with thicknesses in excess of 2 m, depending on the acoustic condition of the object under investigation. Highly reinforced concrete may have less penetration depth. The LAUS provides quasi real time imaging, once the transducers are put in place and the data has been acquired. First measurements on a foundation slab confirm, that the system can register ultrasonic echoes from the back wall at 4 m distance. KW - Ultrasound "Large Aperture" NDT Concrete PY - 2017 DO - https://doi.org/10.1061/(ASCE)IS.1943-555X.0000314 SN - 1076-0342 SN - 1943-555X VL - 23 IS - 1 SP - B4016004-1 EP - B4016004-9 PB - American Society of Civil Engineers (ASCE) CY - Reston, VA 20191-4400 USA AN - OPUS4-39372 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wiggenhauser, Herbert A1 - Samokrutov, A.A. A1 - Mayer, K. A1 - Krause, Martin A1 - Alekhin, S. G. A1 - Elkin, V. T1 - LAUS - Large aperture ultrasonic system - for testing thick concrete structures N2 - A Large Aperture UltraSonic (LAUS) system has been designed and built for testing thick concrete structures. The scalable system consists of twelve ultrasonic units, each hosting 32 individual shear wave transducers with mechanical dry point contact (DPC) to the concrete surface. The twelve units are attached to the concrete surface using a vacuum case which holds them in place during operation. Each LAUS unit can be placed individually depending on the surface condition and optimal ultrasonic condition, e.g. rebar position. Air pressure is supplied to each unit through an air hose. The following extended abstract is a short version of an article to be published in the special edition of ASCE JIS that will describe the outline of the system, the principle of functioning, the data processing and adapted reconstruction calculation based on SAFT as well as the system performance during first applications. T2 - NDT-CE 2015 - International symposium non-destructive testing in civil engineering CY - Berlin, Germany DA - 15.09.2015 KW - Ultrasonic imaging KW - Linear array KW - Reconstruction calculation (SAFT) PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-345383 UR - http://www.ndt.net/?id=18313 SN - 1435-4934 VL - 20 IS - 11 SP - 1 EP - 4 PB - NDT.net CY - Kirchwald AN - OPUS4-34538 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mayer, U. A1 - Böhme, W. A1 - Borsutzki, M. A1 - Häcker, Ralf A1 - Schneider, K. T1 - Hochgeschwindigkeitszugversuche an gefügten Stählen - Ergebnisse eines VDEh-Ringversuchs zum Stahl-Eisen-Prüfblatt N2 - Für die Berechnung des Crashverhaltens von Fahrzeugstrukturen muss zusätzlich zur Dehnratenabhängigkeit des plastischen Verformungsverhaltens des Grundwerkstoffs auch das Verhalten von Fügestellen bei hoher Beanspruchungsgeschwindigkeit bestimmt werden. Ziel der VDEh-Arbeitsgruppe 'Hochgeschwindigkeitszugversuche an gefügten Stählen' war die Erstellung eines Stahl-Eisen-Prüfblattes (SEP) zur Ermittlung crashrelevanter Kennwerte für gefügte Stahl-Feinbleche unter vereinheitlichten Prüfbedingungen. Zur Erarbeitung der in dieser Richtlinie zu formulierenden Empfehlungen wurden Scherzugversuche bei hoher Geschwindigkeit an punktgeschweißten und lasergeschweißten Proben von elf Prüflaboratorien durchgeführt. Der Beitrag beschreibt die Ergebnisse dieses Ringversuchs und seine Auswirkungen auf das SEP. PY - 2009 SN - 0025-5300 VL - 51 IS - 11-12 SP - 755 EP - 760 PB - Hanser CY - München AN - OPUS4-33403 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mayer, K. A1 - Milmann, Boris A1 - Krause, Martin A1 - Mielentz, Frank T1 - Methode zum Nachweis von Verpressfehlern in Spannbeton durch Phasenauswertung bei Ultraschallecho-Verfahren KW - Ultraschall-Echo-Verfahren KW - Verpressfehler KW - Spannbeton KW - Hüllrohr KW - Brücken PY - 2008 SN - 1616-069X SN - 0948-5112 VL - 112 IS - 12 SP - 37 EP - 40 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung CY - Berlin AN - OPUS4-18685 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Mayer, K. A1 - Ballier, G. A1 - Friese, Martin A1 - Mielentz, Frank A1 - Milmann, Boris T1 - Darstellung des Verpresszustandes von Spannkanälen mit 3D-Ultraschallechoverfahren: Modellierung und Experiment T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - Ultraschallecho KW - Rekonstruktionsrechnung KW - SAFT KW - Spannkanäle PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Mi.3.B.1) SP - 1 EP - 12 CY - Berlin AN - OPUS4-22900 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Mayer, K. A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Streicher, Doreen ED - L. Binda, ED - M. di Prisco, ED - R. Felicetti, T1 - New examples for ultrasonic imaging of prestressed concrete elements T2 - 1st International RILEM Conference, - on Site Assessment of Concrete, Masonry and Timber Structures (SACoMaTiS 2008) CY - Varenna, Italy DA - 2008-09-01 KW - Ultrasonic imaging KW - Grouting condition KW - Elastodynamic Finite Integration Technique (EFIT) PY - 2008 SN - 978-2-35158-062-2 VL - 1 IS - PRO 59 SP - 1 EP - 10 PB - RILEM Publications AN - OPUS4-19069 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mielentz, Frank A1 - Boehm, Rainer A1 - Krause, Martin A1 - Mayer, K. T1 - Optimierung von Ultraschall-Prüfkopf-Arrays für die zerstörungsfreie Prüfung im Bauwesen mithilfe von Modellierungen T2 - DGZfP-Jahrestagung 2009 CY - Münster, Deutschland DA - 2009-05-18 KW - Ultraschall KW - Beton KW - Modellierung KW - Schallfeld KW - Punktquellensynthese KW - Elastodynamische Finite Integrationstechnik (EFIT) KW - Prüfkopf KW - Array KW - Gruppenstrahler KW - Phased array PY - 2009 SN - 978-3-940283-16-0 IS - DGZfP-BB 115 (Poster 2) SP - 1 EP - 13 AN - OPUS4-20328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Marklein, R. A1 - Mayer, K. A1 - Zimmer, A. A1 - Krause, Martin T1 - Ganzheitliche Methoden zur zerstörungsfreien Prüfung von Betonbauteilen - Modellierung, Abbildung und Charakterisierung von Verpressfehlern in Hüllrohren N2 - Für die zerstörungsfreie Prüfung großer Betonbauwerke unter dem Aspekt der Analyse von Spannkanälen hat sich die Ultraschalltechnik in den letzten Jahren als geeignete Methode herausgestellt, da sowohl die Messtechnik – insbesondere die Ultraschallwandler – als auch die numerischen Auswerteverfahren in einem Stadium sind, das es erlaubt, größere Messflächen und damit größere Volumina zu beschallen und abzubilden. Mit Hilfe der Modellierung der Ausbreitung elastischer Wellen in komplexen Medien können praxisrelevante Problemstellungen untersucht werden, auch unter dem Aspekt, Testkörper zu planen oder gar zu ersetzen. Durch die Auswertung der Phase der Rekonstruktion eines Streuvorgangs können Fehlstellen klassifiziert und damit Aussagen über die Bauwerkssicherheit signifikant objektiviert werden. Die Methoden werden, im Hinblick auf eine ganzheitliche Sichtweise von skalaren und polarimetrischen Abbildungsverfahren mit Unterstützung der Modellierung und der anschließenden Klassifizierung durch Phasenanalyse, an ausgewählten Beispielen erläutert. For nondestructive testing of concrete buildings under the aspect of tendon duct analysis, ultrasonic testing has proven to be a suitable method, as both the measuring technique – in particular the acoustic sensors – and the numerical methods allow the insonification and imaging of larger surfaces and volumes. With the aid of numerical modelling of elastic wave propagation in complex media real life problems can be examined with the goal to design or even to replace test specimen. By determination of the phase of an imaged scattering event, defects can be classified, and the prediction of the integrity of buildings can be significantly objectified. The methods are explained for selected examples in an integral way with respect to scalar and polarimetric imaging algorithms supported by modelling and subsequent classification through phase analysis. KW - Elastische Wellenausbreitung KW - Numerische Modellierung KW - Polimetrische Abbildungsverfahren KW - Phasenauswertung KW - Beton KW - Spannkanäle KW - Verpressfehler KW - Elastic wave propagation KW - Numerical modelling KW - Polarimetric imaging KW - Phase analysis KW - Concrete KW - Tendon ducts KW - Grouting defects PY - 2008 DO - https://doi.org/10.1524/teme.2008.0868 SN - 0340-837X SN - 0178-2312 SN - 0171-8096 VL - 75 IS - 6 SP - 376 EP - 389 PB - Oldenbourg CY - München AN - OPUS4-18235 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Milmann, Boris A1 - Krause, Martin A1 - Mielentz, Frank A1 - Mayer, K. T1 - Ultraschallecho-Verfahren für Spannbeton: Signifikanter Nachweis von Verpressfehlern mit Phasenauswertung T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen Zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2008-02-21 KW - Ultraschallecho KW - Spannbeton KW - Verpressfehler KW - Modellierung KW - Polarimetrische Abbildungsverfahren PY - 2008 SN - 978-3-940283-08-5 N1 - Serientitel: Berichtsband der Deutschen Gesellschaft für Zerstörungsfreie Prüfung – Series title: Berichtsband der Deutschen Gesellschaft für Zerstörungsfreie Prüfung IS - 112 SP - 1 EP - 11 (Beitrag 11) PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung CY - Berlin AN - OPUS4-18280 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Gräfe, Boris A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Friese, Martin A1 - Wiggenhauser, Herbert A1 - Mayer, K. ED - M.G. Alexander, ED - H.-D. Beushausen, ED - F. Dehn, ED - P. Moyo, T1 - Ultrasonic imaging of post-tensioned concrete elements: New techniques for reliable localization of grouting defects T2 - 2nd International Conference on Concrete Repair, Rehabilitation and Retrofitting CY - Cape Town, South Africa DA - 2008-11-24 KW - Post-tensioned concrete KW - Ultrasonic echo KW - Phase evaluation KW - Air-coupled ultrasound PY - 2009 SN - 978-0-415-46850-3 SP - 521 EP - 527 PB - CRC Press CY - Boca Raton AN - OPUS4-20651 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Mayer, K. A1 - Friese, Martin A1 - Milmann, Boris A1 - Mielentz, Frank A1 - Ballier, G. ED - Odile Abraham, ED - Dérobert, Xavier T1 - Progress in ultrasonic tendon duct imaging T2 - NDTCE `09 - 7th international symposium on non destructive testing in civil engineering CY - Nantes, France DA - 2009-06-30 KW - Reconstruction calculation KW - SAFT KW - EFIT Modelling KW - Prestressed concrete structures PY - 2009 SN - 978-2-7208-2542-5 SN - 1628-4704 IS - Paper 77 SP - 147 EP - 154 AN - OPUS4-20652 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kohl, Christoph A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Mayer, K. A1 - Wöstmann, Jens A1 - Wiggenhauser, Herbert T1 - 3D-Visualisation of NDT-Data using Data Fusion Technique N2 - Non-destructive testing (NDT) of concrete structures is performed using pulse-echo methods. According to the type of the applied waves it can be classified as acoustic (Impact-Echo, Ultrasonics) and electromagnetic methods (Radar). The results are visualised through different imaging processes. This work is performed in the frame of a research project promoted by Deutsche Forschungsgemeinschaft (FOR384).The objective of data fusion is to use the complementary information of the different methods. Radar can detect metallic reflectors in concrete (metallic ducts and concrete reinforcement) very well. This method is not able to locate defects behind these reflectors (injecting defects, defects behind close concrete reinforcement), because the electromagnetic waves are completely reflected at metals. The acoustic methods are able to compensate this deficit i.e. acoustic waves can penetrate through metal. But acoustic waves in the ultrasonic range are completely reflected by air layers. Air layers have smaller influence on radar propagation, so that both methods complement each other.In order to be able to combine the NDT-data from several methods records at the same volume, the different data setsmodes of signals must be adapted. The ultrasonic and radar data have to be reconstructed with programs based on the Synthetic Aperture Focusing Technique (SAFT) before data fusion. Subsequently, a conversion of the data into a uniform format has to be carried out. This is a prerequisite in order to keep the data exchange between the project partners as simple as possible. After the data sets are imported and transferred into a common reference system, they can be processed with operations according to the purpose of the investigation. Results, which have been achieved in concrete test specimen with radar and ultrasonics, will be presented and will show the feasibility of the data fusion method. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 KW - Radar KW - Ultrasonic KW - Data Fusion PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/v023/v023.htm SN - 3-931381-49-8 SP - 1 EP - 11(?) PB - DGZfP CY - Berlin AN - OPUS4-3053 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kohl, Christoph A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Mayer, K. A1 - Wöstmann, Jens A1 - Wiggenhauser, Herbert T1 - 3D-visualisation of NDT data using a data fusion technique KW - Non-destructive testing KW - Radar KW - Ultrasonic KW - Data fusion KW - SAFT PY - 2003 SN - 0007-1137 VL - 45 IS - 12 SP - 800 EP - 808 PB - British Institute of Non-Destructive Testing CY - Northampton AN - OPUS4-4585 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -