TY - RPRT A1 - Maack, Stefan A1 - Schäfer, S. A1 - Braml, T. A1 - Wimmer, J. A1 - Jedlitschka, A. A1 - Kuhn, T. A1 - Fertig, T. A1 - Schütz, A. T1 - CASPAR Construction Administration Shell - Plattform für die beweissichere und rückführbare Datennutzung im Bauwesen N2 - Das zentrale Ziel des Forschungsvorhabens CASPAR ist die Entwicklung einer technischen Lösung zur beweissicheren und rückführbaren Datenbasis von digitalen Informationen zur Bewertung von Bauwerken. Ein konsistentes, semantisches und maschinenlesbares Datenmodell wurde entwickelt, um Daten aus verschiedenen Quellen zu aggregieren und Schnittstellen für die Echtzeit-Kommunikation mit Sensoren zu schaffen. Ein besonderer Schwerpunkt lag auf der Einführung der Verwaltungsschale (Asset Administration Shell, AAS), einer Kerntechnologie der Industrie 4.0, als standardisierten digitalen Zwilling für Brückenbauwerke. Die Verwaltungsschale ermöglicht die strukturierte, interoperable und semantisch eindeutige Darstellung von Bauwerksdaten. Eine Blockchain-basierte Lösung wurde entwickelt, um die sichere und manipulationsresistente Datenübertragung und -ablage zu gewährleisten. Ein Demonstrator, basierend auf der Open Source Plattform Eclipse BaSyx, wurde entwickelt, um die Technologien zu veranschaulichen. Der Demonstrator wurde im November 2024 auf der Messe SPS in Nürnberg vorgestellt. Ein wesentlicher Bestandteil des Forschungsvorhabens war die Entwicklung eines konsistenten, semantischen und maschinenlesbaren Datenmodells für Brückenbauwerke. Dieses Modell ermöglicht die Aggregation von Informationen aus verschiedenen Quellen und die Entwicklung von Schnittstellen für die Echtzeit-Kommunikation mit Sensoren. Ein besonderer Schwerpunkt lag auf der Einführung der Verwaltungsschale (Asset Administration Shell, AAS), einer Kerntechnologie der Industrie 4.0, als standardisierten digitalen Zwilling für Brückenbauwerke. Die Verwaltungsschale ermöglicht die strukturierte, interoperable und semantisch eindeutige Darstellung von Bauwerksdaten. Eine Blockchain-basierte Lösung wurde entwickelt, um die sichere und manipulationsresistente Datenübertragung und -ablage zu gewährleisten. Ein Demonstrator, basierend auf der Open Source Plattform Eclipse BaSyx, wurde entwickelt, um die Technologien zu veranschaulichen. KW - Lebenszyklus KW - Brücken KW - Datenablage KW - Digitalisierung KW - Industrie 4.0 KW - Bauwesen PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-640571 DO - https://doi.org/10.34657/21445 SP - 1 EP - 37 PB - TIB Technische Informationsbibliothek AN - OPUS4-64057 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Braml, T. A1 - Wimmer, J. A1 - Maack, Stefan A1 - Küttenbaum, Stefan A1 - Kuhn, T. A1 - Reingruber, M. A1 - Gordt, A. A1 - Hamm, J. ED - Krieger, J. T1 - Datenablage als Grundlage für den digitalen Zwilling eines Bauwerks – Verwaltungsschale BBox N2 - Der Beitrag stellt die Entwicklung und die Systemarchitektur der BBox am Beispiel von 2 Projekten dar. T2 - 1. Fachkongress Digitale Transformation im Lebenszyklus der Verkehrsinfrastruktur CY - Esslingen, Germany DA - 29.06.2021 KW - Digitaler Zwilling KW - Bestandsbauwerke KW - Physikalisches Modell PY - 2021 SN - 978-3-8169-3530-8 SP - 75 EP - 84 PB - expert Verlag CY - Tübingen AN - OPUS4-52938 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Braml, T. A1 - Wimmer, J. A1 - Maack, Stefan A1 - Küttenbaum, Stefan A1 - Kuhn, T. A1 - Reingruber, M. A1 - Gordt, A. A1 - Hamm, J. ED - Krieger, J. T1 - Datenablage als Grundlage für den digitalen Zwilling eines Bauwerks – Verwaltungsschale BBox N2 - Der Weg zur digitalen Brücke ist eingeschlagen. Im Bereich der Planung, Bauüberwachung und -ausführung wird aktuell das Building Information Modelling (BIM) eingeführt. Ist eine Brücke in der Baulast von Bund und Ländern errichtet, wird ihr Zustand im Zuge von wiederkehrenden Bauwerksprüfungen nach DIN 1076 lückenlos überwacht. Abgespeichert werden die Informationen der Überwachung in einer Datenbank (ASB-ING Teilsystem Bauwerksdaten). Aus dieser Datenbank können anschließend relevante Informationen in ein objektspezifisches Bauwerksbuch überführt werden. In dieser Datenbank werden im Vorfeld definierte Daten abgespeichert. Reine Messdaten oder aber auch die verwendeten ingenieurtechnisch-physikalischen Modelle verbleiben in der Regel bei den beauftragen Dienstleistern. Zusammengefasst existieren verschiedene parallele Insellösungen der Informationsablage. Gegenstand verschiedener Forschungsanstrengungen ist es nun Lösungen zu finden, die einen ganzheitlichen Ansatz für den Informationsfluss von der Errichtung über den Betrieb bis hin zum Abbruch eines Bauwerkes sicherstellen. Im Rahmen einer prototypischen Entwicklung wird auf Grundlage, des für die Industrie 4.0 entwickelten open source Software Framework Eclipse BaSyx, ein möglicher Lösungsansatz – die Verwaltungsschale BBox (Bridge Box) - präsentiert. Dieser Lösungsansatz stellt das physikalisch-ingenieurtechnische Modell zur Zustandsbewertung der Brücke gedanklich in den Mittelpunkt. Unter der Voraussetzung einer durchgängigen Digitalisierung der gesamten Prozessschritte innerhalb der Lebensdauer der Brücke, kann jeder Planungs- und Fertigungsschritt, die Instandhaltung einschließlich des Rückbaus erfasst werden. Das Besondere hierbei ist, dass auch die Grundlagen der Bewertung, wie Messdaten, mit abgespeichert werden. Die Modellstruktur der Verwaltungsschale erlaubt hierbei eine bedarfsgerechte Granularität hinsichtlich der Messdaten auf allen virtuellen Ebenen, um das physikalisch-ingenieurtechnisch Modell mit Daten zu versorgen. Die gewählte Form der Datenablage bildet den Grundstein für zukünftige KI-Auswertungen z.B. mit den Methoden des Maschinellen Lernens (ML). Der Zugriff auf die dafür jeweils benötigten Daten wird durch die Ablage der Daten einschließlich Metadaten und den Einsatz einer Standard S3 Schnittstelle stark vereinfacht. Der Beitrag stellt die Entwicklung und die Systemarchitektur der BBox am Beispiel von 2 Projekten dar. T2 - 1. Fachkongress Digitale Transformation im Lebenszyklus der Verkehrsinfrastruktur CY - Esslingen, Germany DA - 29.05.2021 KW - Brücke KW - Digitalisierung KW - Digitaler Zwilling KW - Datenablage PY - 2021 UR - https://elibrary.narr.digital/article/99.125005/dtv202110075 SN - 2748-9221 IS - 1 SP - 75 EP - 84 PB - expert verlag AN - OPUS4-56159 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hähner, P. A1 - Rinaldi, C. A1 - Bicego, V. A1 - Affeldt, E. E. A1 - Brendel, T. A1 - Andersson, H. A1 - Beck, T. A1 - Klingelhöffer, Hellmuth A1 - Kühn, Hans-Joachim A1 - Köster, A. A1 - Loveday, M. A1 - Marchionni, M. A1 - Rae, C. T1 - Research and development into a European code-of-practice for strain-controlled thermo-mechanical fatigue testing N2 - Thermo-mechanical fatigue (TMF) testing plays an increasingly important role in the design, the reliability assessment and the lifecycle management of safety critical components used, for instance, for power generation, in the process industry and in aeronautical and automotive applications, with a view to increasing the fuel efficiency, safety and service intervals, while reducing production (and material) costs. In a European Commission funded research project (acronym: TMF-Standard) of the 5th Framework Programme, 20 European laboratories have undertaken a joint research effort to establish a validated code-of-practice (CoP) for strain-controlled TMF testing. Starting from a survey of the testing protocols and procedures previously used by the partners, a comprehensive pre-normative research activity into various issues has been completed, addressing the dynamic temperature control, the effects of deviations in nominal temperatures and phase angles, the influences of temperature gradients, as well as the practicalities of test interruption and restart procedures. Meaningful allowable tolerances for the various test parameters were identified and practical recommendations as to the test techniques were formulated. From this a preliminary CoP was compiled and used to guide an extensive round robin exercise among the project partners. From the statistical analysis of that exercise, a validated CoP was derived dealing with strain-controlled constant amplitude TMF of nominally homogeneous metallic materials subjected to spatially uniform temperature fields and uniaxial mechanical loading. It is intended to give advice and guidance on the appropriate test setup, testing procedures and the analysis of results, in particular for newcomers in the field of strain-controlled TMF. This paper highlights some of the results of the TMF-Standard project. Moreover, commonalities and differences of the present CoP with respect to the standard documents for strain-controlled TMF, which have been developed at ISO and ASTM levels, are presented in this paper. KW - Thermo-mechanical fatigue KW - Ni-base superalloy KW - Standardisation KW - Test methods PY - 2008 DO - https://doi.org/10.1016/j.ijfatigue.2007.01.052 SN - 0142-1123 VL - 30 IS - 2 SP - 372 EP - 381 PB - Elsevier CY - Oxford AN - OPUS4-17536 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Braml, T. A1 - Wimmer, J. A1 - Varabei, Y. A1 - Maack, Stefan A1 - Küttenbaum, Stefan A1 - Kuhn, T. A1 - Reingruber, M. A1 - Gordt, A. A1 - Hamm, J. T1 - Digitaler Zwilling: Verwaltungsschale BBox als Datenablage über den Lebenszyklus einer Brücke T1 - Digital twin: Asset administration shell BBox as data storage over the life cycle of a bridge N2 - Auf dem Weg zur digitalen Brücke existieren bereits erste Lösungen, die den Lebenszyklus einer Brücke abbilden können. Für die Planung, den Bau und den Unterhalt stehen unterschiedlichste Werkzeuge, z. B. BIM, DIN 1076, SIB-Bauwerke, Monitoring etc. zur Verfügung, die jeweils mit unterschiedlichen Datenformaten arbeiten. Für ein intelligentes Erhaltungsmanagement müssen aber alle Daten mit den verschiedenen Datenformaten zusammengeführt, abgelegt und so verwaltet werden können, dass über den gesamten Lebenszyklus einer Brücke die Abbildung eines ganzheitlichen digitalen Zwillings eines Bauwerks möglich ist. Die Autoren haben dafür mit BBox den Prototyp einer Verwaltungsschale (VWS) auf Grundlage von Industrie 4.0 entwickelt. Damit wird das physikalisch-ingenieurtechnische Modell zur Zustandsbewertung der Brücke in den Mittelpunkt gestellt und der gesamte Lebenszyklus einer Brücke kann unabhängig von Datenformaten digital erfasst werden. Da der Aufbau der VWS durch die Granularität optimal strukturiert ist, bietet die Ablage und Einspeisung von Messdaten sowohl die Grundlage eines Live-Monitorings als auch den Grundstein für maschinelles Lernen (ML). Der Datenzugriff via S3-Schnittstelle erleichtert die Entwicklung von eigenen Prognosemodellen mit Informationsmustern (SHIP – Structural Health Information Pattern). Am Beispiel der Heinrichsbrücke Bamberg wird die praktische intelligente Umsetzung des Bauwerksmonitorings inkl. VWS mit Informationsmustern und ML gezeigt. N2 - On the way to the digital bridge, initial solutions already exist that can map the life cycle of a bridge. A wide variety of tools are available for planning, construction and maintenance, e. g. BIM, DIN 1076, SIB structures, monitoring etc., each of which works with different data formats. For an intelligent maintenance management, however, all data with the different data formats must be merged, stored, and managed in such a way that the mapping of a holistic digital twin of a structure is possible over the entire life cycle of a bridge. For this purpose, the authors have developed BBox, a prototype of an asset administration shell (AAS) based on Industry 4.0. This places the physical-engineering model for assessing the condition of the bridge at the center, and the entire life cycle of a bridge can be digitally recorded independently of data formats. Since the structure of the AAS is optimally structured through granularity, the storage and feeding of measurement data provides both the basis of live monitoring and the cornerstone for machine learning (ML). The data access via S3 interface facilitates the development of own prognosis models with information patterns (SHIP – Structural Health Information Pattern). Using the Heinrichsbrücke Bamberg as an example, the practical intelligent implementation of structural monitoring incl. AAS with information patterns and ML is shown. KW - Digitaler Zwilling KW - Lebenszyklus KW - Bauwerksmonitoring KW - Industrie 4.0 KW - Maschinelles Lernen KW - Digital twin KW - Life cycle KW - Structural health monitoring KW - Industry 4.0 KW - Machine learning PY - 2021 DO - https://doi.org/10.1002/bate.202100094 SN - 1437-0999 SP - 1 EP - 9 PB - Ernst & Sohn CY - Berlin AN - OPUS4-54017 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nerger, Deborah A1 - Moosavi, Robabeh A1 - Bracklow, F. A1 - Hering, M. A1 - Kühn, T. A1 - Curbach, M. A1 - Hille, Falk A1 - Rogge, Andreas ED - Papadrakakis, M. ED - Fragiadakis, M. ED - Papadimitriou, C. T1 - Impact damage characterization at RC plates with planar tomography and FEM N2 - Prediction of dynamic effects of reinforced concrete structures under impact loading is a technical challenge. This is a consequence of the great variability of the physical properties resulting from the wide adaptability of reinforced concrete and a consequence of the wide range of impact loading. Experiments and numerical investigations are normally used on a small scale to address the problem. In this paper, impact tests on reinforced conrete plates with the lateral dimensions of 1.5 m x 1.5 m and a thickness of 30 cm are presented. In bending reinforcement, besides the velocity two properties are varied, the diameter and the spatial distribution of the rebars. Experiments are performed at the Otto-Mohr-Laboratory of the Institute of Concrete Structures of the Technische Universit¨at Dresden. Due to the accelerated fall of the impactor the velocity ranges between 20 and 70 m/s. In addition to the measured quantities such as bearing forces, accelerations are also measured at 4 different positions on and under the plate, as well as the deflection at several positions. The measured data are used for the analysis of the damage form and the numerical examinations with the program Ansys Autodyn and the material model after Drucker-Prager. Numerical investigations support the tests, with detailed analysis of individual effects. These numerical computations and the planar tomographic investigations were carried out at BAM in Berlin. With the help of planar tomographic evaluation, the damaged structure is made visible and compared with the numerical results. Influences of the bending reinforcement are explained on the basis of damage evaluation in the local area and on selected measured values. In addition to the test evaluation, the tomographic and numerical methods are presented. T2 - XI International Conference on Structural Dynamics (EURODYN 2020) CY - Online meeting DA - 23.11.2020 KW - Post-impact evaluation KW - Damage characterization KW - Planar tomography KW - Drucker-Prager KW - Ansys Autodyn PY - 2020 SN - 978-618-85072-2-7 VL - 1 SP - 2521 EP - 2543 PB - Institute of Structural Analysis and Antiseismic Research, School of Civil Engineering, National Technical University of Athens (NTUA), Greece CY - Athens, Greece AN - OPUS4-51769 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tamberg, D. A1 - Thiele, D. A1 - Brodda, B. G. A1 - Lammertz, H. A1 - Coerdt, W. A1 - Mainka, E. A1 - Görgenyi, T. A1 - Stütz, A. A1 - Aigner, H. A1 - Deron, S. A1 - Kuhn, E. T1 - Evaluation of an interlaboratory comparison of the chemical assay of U, Th oxide coated particles PY - 1981 SN - 92-0-179081-3 N1 - Serientitel: IAEA safeguards – Series title: IAEA safeguards IS - 3 SP - 1 EP - 38 PB - IAEA CY - Wien AN - OPUS4-33362 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thiele, D. A1 - Brodda, B.-G. A1 - Mainka, E. A1 - Görgenyi, T. A1 - Kuhn, E. A1 - Aigner, H. T1 - International Comparison of the Chemical Assay of Uranium and Thorium in THTR Fuel for Safegurards Purposes N2 - The Thorium High Temperature Prototype Reactor (THTR) at Schmehausen (Fed. Rep. Germany) burns a (Th, U)O2 nuclear fuel using 93% enriched uranium. This material is particularly safeguards sensitive. An interlaboratory test has been completed on the heavy metal determination in BISO type (Th, U)O2 particles. The laboratories involved were BAM, KFA, KfK, NUKEM and SAL (IAEA). The modified Davies and Gray titration was applied for uranium, oxalate precipitation followed by ignition to ThO2 and gravimetry for thorium. The exercise allowed an estimate to be made of the various error components: the results indicate that the sampling techniques applied in this experiment ensure a representativity of the sample of 0.05% or better. The precision of the measurements (1σ) is better than or equal to 0.15%. Assuming the overall means are the true values, the accuracy of the methods is better than or equal to 0.1%. This fulfills safeguards requirements. PY - 1983 SN - 0022-3115 IS - 113 SP - 142 EP - 148 PB - North Holland Publ. Co CY - Amsterdam AN - OPUS4-40817 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Quell, P. A1 - Knops, M. A1 - Heinicke, M. A1 - Rettenmeier, A. A1 - Kühn, M. A1 - Rücker, Werner A1 - Baeßler, Matthias A1 - Rolfes, R. A1 - Haake, G. A1 - Hahn, B. A1 - Benesch, M. A1 - van Radecke, H. A1 - Finger, K. A1 - Neumann, T. A1 - Herklotz, K. T1 - Offshore Wind Energy Research in Germany - RAVE - Research at Alpha VEntus N2 - To start the large-scale deployment of offshore wind in German waters, the German Federal Ministry for the Environment (BMU) supports the offshore test site "alpha ventus" in the North Sea with a research budget of about 50 million Euro in the next years. The overall objective of the research is to reduce the costs of offshore wind energy deployment in deep water. In order to provide all participating research projects with detailed data, the test site will be equipped with extensive measurement instrumentation. This research initiative was named RAVE – Research at Alpha VEntus – and consists of a variety of projects in connection with the installation and operation of alpha ventus. As part of the RAVE initiative, so far the participating institutes and companies have prepared projects on the following topics: • Realization of the joint measurements and data management • Analysis of loads, modelling and further development of the different components of offshore wind turbines • Loads at offshore foundations and structures • Further development of LIDAR wind measuring techniques • Grid integration of offshore wind energy • Monitoring of the offshore wind energy deployment in Germany – "Offshore WMEP" • Measurement of the operating noises and modelling of the sound propagation between tower and water • Ecologic research T2 - European Offshore Wind 2007 Conference & Exhibition CY - Berlin, Germany DA - 2007-12-04 KW - Offshore Wind Energy KW - Rave KW - Foundations PY - 2007 SP - 1 EP - 10 AN - OPUS4-17976 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nerger, Deborah A1 - Moosavi, Robabeh A1 - Bracklow, F. A1 - Hering, M. A1 - Kühn, T. A1 - Curbach, M. A1 - Hille, Falk A1 - Rogge, Andreas T1 - Planar tomography and numerical analysis for damage characterization of impact loaded RC plates N2 - The damage analysis of reinforced concrete (RC) is of high interest for reasons of effective maintenance and structural safe-ty of buildings. The damage structures of RC plates loaded by an impact were investigated, applying X-ray planar tomogra-phy and finite element method (FEM). Planar tomography allows getting three-dimensional information of the RC elements and the damage including crack, spalling and scabbing. The FEM model validated on the tomography data justifies the appli-cation for further predictions of the damage description. In this study, we investigated concrete plates of three different thick-ness subjected to impacts at different low- and medium-velocity, whereby the used impactor had a flat tip, which resulted in small penetrations on the front side and scabbing on the rear side. In order to quantify the damage, the damage volume and its distribution through the plate were computed and the correlations between degree of damage and impact velocity were found out. KW - Impact KW - Damage characterization KW - Planar tomography KW - Numeric simulation KW - Reinforced concrete structure PY - 2020 DO - https://doi.org/10.1002/cend.202000017 VL - 8 SP - 1 EP - 19 PB - Wiley AN - OPUS4-51117 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nerger, Deborah A1 - Hille, Falk A1 - Moosavi, Robabeh A1 - Grunwald, Marcel A1 - Redmer, Bernhard A1 - Kühn, T. A1 - Hering, M. A1 - Bracklow, F. T1 - Post-impact evaluation at RC plates with planar tomography and FEM N2 - Due to the wide range of applications, the easy production and the large field of use, reinforced concrete (RC) is a widespread building material. This variety of applications is reflected in a wide range of physical material properties. Not only therefor it still is a technical challenge to provide all necessary test conditions for experimentally reproducing dynamic effects under impact loading of RC structures. In this paper we present investigations on the thicknesses of RC plates under low and medium high velocity impact loading by a flat-tipped impactor. The planar tomography setup at BAM is used to visualize the impact damage and to characterize the damage features such as cracks, scabbing and spalling. Further, the comparison of tomography results with those of an applied numeric simulation analysis is used to verify the numeric models for future damage prognosis under impact loading. Using the results of both, the tomographic as well as the FE analysis, different damage features were investigated and compared regarding their validity. Crack damage plays a leading part and the significance of summarized crack values as well as their distribution is analyzed. The total damage value but also the determined damage distribution both provide an input for describing damage as a function of the impactor velocity and plate thickness. KW - Reinforced concrete structure KW - Post-impact evaluation KW - Damage characterization KW - Ansys Autodyn KW - Drucker-Prager KW - Planar tomography PY - 2020 DO - https://doi.org/10.1016/j.matpr.2020.05.671 SP - 1 EP - 10 PB - Elsevier AN - OPUS4-51115 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Moosavi, Robabeh A1 - Grunwald, Marcel A1 - Redmer, Bernhard A1 - Nerger, Deborah A1 - Hille, Falk A1 - Kühn, T. A1 - Hering, M. T1 - Damage investigations of concrete under impact load using laminography N2 - We examine the behavior of reinforced concrete components subjected to impact induced loading conditions which might be caused by vessels collisions such as aircraft fuel tanks The concrete plates were impact damaged at TU Dresden and shipped to BAM At BAM laminar tomography as the imaging method is used to determine and quantify the damage state An automatic crack detection method based on template matching is applied to find the cracks and we aim to develop a new method using machine learning Algorithms In addition numerical models are developed to understand the experiment and to predict the damage structures based on failure mechanisms. T2 - DCMS Summer School MATERIALS 4.0 CY - Dresden, Germany DA - 10.09.2018 KW - Laminography KW - Crack detection KW - Reinforced concrete KW - 3D imaging PY - 2018 AN - OPUS4-48637 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nerger, Deborah A1 - Hille, Falk A1 - Moosavi, Robabeh A1 - Grunwald, Marcel A1 - Redmer, Bernhard A1 - Kühn, T. A1 - Hering, M. A1 - Bracklow, F. T1 - Improved tomographic investigation for impact damage characterization N2 - Reinforced concrete (RC) is used as structural material in most diverse civil engineering applications. For the variability of its physical properties it is still an engineering challenge to meet all necessary requirements for the prediction of dynamic effects under impact loading. In this paper, investigations are shown within the scope of quantifying and evaluating the damage caused by an impact. The experimental investigations are performed in the field of low- and medium-velocity impact. The chosen flat nose shape results in small penetrations on the top side and scabbing on the bottom side. The plate is scanned with an adapted planar tomographic examination after the impact, and the damage is analysed, afterwards. Cracks and spalling are made visible with a reconstruction. The numerical model validated on the tomographic results justifies the application for further predictions of the damage description. T2 - 25th International Conference on Structural Mechanics in Reactor Technology - SMIRT25 CY - Charlotte, NC, USA DA - 04.08.2019 KW - Impact KW - Damage characterization KW - Planar tomography KW - Numeric simulation KW - Reinforced concrete structure PY - 2019 SP - Paper Div 5 S8, 1 EP - 9 AN - OPUS4-49541 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Marchionni, M. A1 - Klingelhöffer, Hellmuth A1 - Kühn, Hans-Joachim A1 - Ranucci, T. A1 - Matzak, Kathrin T1 - Thermo-mechanical Fatigue of the Nickel-Base Superalloy Nimonic 90 KW - Thermo-mechanical fatigue KW - TMF KW - LCF KW - Nickel base superalloy KW - Nimonic 90 PY - 2007 SN - 1013-9826 VL - 345-346 SP - 347 EP - 350 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-14721 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Al-Falahat, A M A1 - Kardjilov, N A1 - Woracek, R A1 - Boin, M A1 - Markötter, Henning A1 - Kuhn, L T A1 - Makowska, M A1 - Strobl, M A1 - Pfretzschner, B A1 - Banhart, J A1 - Manke, I T1 - Temperature dependence in Bragg edge neutron transmission measurements N2 - A systematic study has been carried out to investigate the neutron transmission signal as a function of sample temperature. In particular, the experimentally determined wavelength-dependent neutron attenuation spectra for a martensitic steel at temperatures ranging from 21 to 700°C are compared with simulated data. A theoretical description that includes the Debye–Waller factor in order to describe the temperature influence on the neutron cross sections was implemented in the nxsPlotter software and used for the simulations. The analysis of the attenuation coefficients at varying temperatures shows that the missing contributions due to elastic and inelastic scattering can be clearly distinguished: while the elastically scattered intensities decrease with higher temperatures, the inelastically scattered intensities increase, and the two can be separated from each other by analysing unique sharp features in the form of Bragg edges. This study presents the first systematic approach to quantify this effect and can serve as a basis , for example, to correct measurements taken during in situ heat treatments, in many cases being a prerequisite for obtaining quantifiable results. KW - Neutron Bragg edge imaging KW - Debye–Waller factor KW - Temperature-dependent neutron transmission KW - Super martensitic stainless steel PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-556896 DO - https://doi.org/10.1107/S1600576722006549 VL - 55 IS - Pt 4 SP - 919 EP - 928 PB - International Union of Crystallography AN - OPUS4-55689 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -