TY - JOUR A1 - Schoetz, U. A1 - Deliolanis, N.C. A1 - Ng, D. A1 - Pauli, Jutta A1 - Resch-Genger, Ute A1 - Kühn, E. A1 - Heuer, S. A1 - Beisker, W. A1 - Köster, R.W. A1 - Zitzelsberger, H. A1 - Caldwell, R.B. T1 - Usefulness of a Darwinian system in a biotechnological application: evolution of optical window fluorescent protein variants under selective pressure N2 - With rare exceptions, natural evolution is an extremely slow process. One particularly striking exception in the case of protein evolution is in the natural production of antibodies. Developing B cells activate and diversify their immunoglobulin (Ig) genes by recombination, gene conversion (GC) and somatic hypermutation (SHM). Iterative cycles of hypermutation and selection continue until antibodies of high antigen binding specificity emerge (affinity maturation). The avian B cell line DT40, a cell line which is highly amenable to genetic manipulation and exhibits a high rate of targeted integration, utilizes both GC and SHM. Targeting the DT40's diversification machinery onto transgenes of interest inserted into the Ig loci and coupling selective pressure based on the desired outcome mimics evolution. Here we further demonstrate the usefulness of this platform technology by selectively pressuring a large shift in the spectral properties of the fluorescent protein eqFP615 into the highly stable and advanced optical imaging expediting fluorescent protein Amrose. The method is advantageous as it is time and cost effective and no prior knowledge of the outcome protein's structure is necessary. Amrose was evolved to have high excitation at 633 nm and excitation/emission into the far-red, which is optimal for whole-body and deep tissue imaging as we demonstrate in the zebrafish and mouse model. KW - Fluorescent protein KW - Quantum yield PY - 2014 DO - https://doi.org/10.1371/journal.pone.0107069 SN - 1932-6203 VL - 9 IS - 9 SP - e107069-1 EP - e107069-12 PB - PubMed Central AN - OPUS4-31976 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Aegerter, J. A1 - Kühn, Hans-Joachim A1 - Frenz, H. A1 - Weißmüller, C. T1 - EN ISO 6892-1:2009 - Tensile testing: initial experience from the practical implementation of the new standard N2 - With the publication of EN ISO 6892-1:2009, the harmonisation of tensile testing at room temperature in Europe was achieved by combining EN 10002-1:2001 with ISO 6892:1998. Essential changes are the introduction of the strain rate and the strain rate control as the significant testing rate or control mode, respectively, referred to as “Method A”. By using this method in the correct way it is guaranteed that in the moment of determination of properties comparable resulting strain rates at the test piece in smaller ranges of specified strain rates are adopted — also if different stiffnesses of the testing equipment are present. This leads especially for strain rate sensitive materials to better comparable results. In this paper it is documented the need for the implementation of method A, methods for the realisation — also by the use of older testing systems — and an example of the comparability of results of the methods for a strain-rate-sensitive-steel. KW - Zugversuch KW - Dehngeschwindigkeit KW - Steifigkeit PY - 2011 SN - 0025-5300 VL - 53 IS - 10 SP - 595 EP - 603 PB - Hanser CY - München AN - OPUS4-25005 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Aegerter, J. A1 - Kühn, Hans-Joachim A1 - Frenz, H. A1 - Weißmüller, C. T1 - DIN EN ISO 6892-1:2009 - Der Zugversuch - Erste Erfahrungen aus der praktischen Umsetzung der neuen Norm N2 - Mit der Veröffentlichung der DIN EN ISO 6892-1:2009 wurde für den Zugversuch bei Raumtemperatur eine Harmonisierung der in Europa verbindlichen EN 10002-1:2001 mit der ISO 6892:1998 erreicht. Wesentliche Änderungen sind die Einführung der Dehngeschwindigkeit und der Dehngeschwindigkeitsregelung als maßgebliche Prüfgeschwindigkeit bzw. Regelungsart, als Verfahren A bezeichnet. Mit der korrekten Anwendung dieses Verfahrens wird gewährleistet, dass im Moment der Kennwerteermittlung bei enger spezifizierten zulässigen Dehngeschwindigkeitsbereichen vergleichbare resultierende Dehngeschwindigkeiten an der Probe auch bei unterschiedlichen Steifigkeiten der Prüfaufbauten vorliegen. Dieses führt besonders bei dehngeschwindigkeitssensitiven Werkstoffen zu deutlich vergleichbareren Ergebnissen. In diesem Beitrag wird auf die Notwendigkeit der Einführung des Verfahrens A, der möglichen Umsetzungen auch bei Verwendung von älteren Prüfsystemen sowie exemplarisch auf vergleichende Ergebnisse der Verfahren an einem dehngeschwindigkeitssensitivem Stahlwerkstoff eingegangen. KW - Zugversuch KW - Dehngeschwindigkeit KW - Steifigkeit PY - 2011 SN - 0025-5300 VL - 53 IS - 10 SP - 586 EP - 594 PB - Hanser CY - München AN - OPUS4-25006 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bloching, H. A1 - Aegerter, J. A1 - Kühn, Hans-Joachim ED - Grellmann, W. T1 - DIN EN ISO 6892-2: Wesentliche Änderungen in der Norm zum Warmzugversuch N2 - Die im Mai 2011 veröffentlichte Internationale Norm ISO 6892-2 "Metallische Werkstoffe — Zugversuch - Teil 2: Prüfverfahren bei erhöhter Temperatur" ersetzt die Europäische Norm EN 10002-5 und die Internationale Norm ISO 783. Technische Änderungen/Ergänzungen im Vergleich zu den Vorgängernormen beziehen sich im Wesentlichen auf die Prüfgeschwindigkeiten und die Dehnungsmessung. In Anlehnung an Teil 1 der ISO 6892 (Prüfung bei Raumtemperatur) wird die Dehngeschwindigkeit als maßgebliche Prüfgeschwindigkeit mit eingeengten Bereichen (Verfahren A) empfohlen. Zum Ansetzen des Dehnungsaufnehmers und zur Festlegung der Messlänge sind nun verschiedene Verfahren möglich. In dem Beitrag wird auch anhand von Beispielen auf mögliche Auswirkungen auf die zu bestimmenden Kennwerte eingegangen. T2 - DVM-Tagung Werkstoffprüfung 2011 - Neue Entwicklungen in der Werkstoffprüfung - Herausforderungen an die Kennwertermittlung CY - Berlin, Germany DA - 01.12.2011 KW - Warmzugversuch KW - Thermische Ausdehnung KW - Messlänge KW - Dehngeschwindigkeit PY - 2011 SN - 978-3-9814516-1-0 SN - 1861-8154 N1 - Serientitel: DVM-Bericht – Series title: DVM-Bericht IS - 643 SP - 245 EP - 252 AN - OPUS4-25007 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Darlatt, Erik A1 - Traulsen, C.H.-H. A1 - Poppenberg, J. A1 - Richter, S. A1 - Kühn, Julius A1 - Schalley, C.A. A1 - Unger, Wolfgang T1 - Evidence of click and coordination reactions on a self-assembled monolayer by synchrotron radiation based XPS and NEXAFS N2 - An ethynylterpyridine was 'clicked' to an azide-terminated self-assembled monolayer on gold and characterized by synchrotron radiation based surface analysis as NEXAFS and XPS. The detection of azide and terpyridine signatures confirmed a partial click reaction at room temperature. The absence of the azides after reaction at 50 °C indicates an almost complete conversion. For the latter case successful Pd(II) coordination has been proven. The Au–S interface of the SAMs has been characterized by S 1s and S 2p XPS. KW - Synchrotron radiation XPS KW - NEXAFS spectroscopy KW - Surface click chemistry KW - Self-assembled monolayer KW - HAXPES KW - XANES PY - 2012 DO - https://doi.org/10.1016/j.elspec.2012.02.004 SN - 0368-2048 SN - 1873-2526 VL - 185 IS - 3-4 SP - 85 EP - 89 PB - Elsevier CY - Amsterdam AN - OPUS4-25596 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thiele, D. A1 - Brodda, B.-G. A1 - Mainka, E. A1 - Görgenyi, T. A1 - Kuhn, E. A1 - Aigner, H. T1 - International Comparison of the Chemical Assay of Uranium and Thorium in THTR Fuel for Safegurards Purposes PY - 1983 SN - 0022-3115 IS - 113 SP - 142 EP - 148 PB - North Holland Publ. Co CY - Amsterdam AN - OPUS4-40817 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kuner, Maximilian A1 - Kühn, S. A1 - Haase, H. A1 - Meyer, Klas A1 - Koch, Matthias T1 - Cleaving Ergot Alkaloids by Hydrazinolysis - A Promising Approach for a Sum Parameter Screening Method N2 - Ergot alkaloids are mycotoxins formed by fungi of the Claviceps genus, which are some of the most common contaminants of food and feed worldwide. These toxins are a structurally heterogeneous group of compounds, sharing an ergoline backbone. Six structures and their corresponding stereoisomers are typically quantified by either HPLC-FLD or HPLC-MS/MS and the values subsequently summed up to determine the total ergot alkaloid content. For the development of a screening method targeting all ergot alkaloids simultaneously, the alkaloids need to be transferred to one homogeneous structure: a lysergic acid derivative. In this study, two promising cleaving methods—acidic esterification and hydrazinolysis—are compared, using dihydroergocristine as a model compound. While the acidic esterification proved to be unsuitable, due to long reaction times and oxidation sensitivity, hydrazinolysis reached a quantitative yield in 40-60 min. Parallel workup of several samples is possible. An increasing effect on the reaction rate by the addition of ammonium iodide was demonstrated. Application of hydrazinolysis to a major ergot alkaloid mix solution showed that all ergopeptines were cleaved, but ergometrine/-inine was barely affected. Still, hydrazinolysis is a suitable tool for the development of a sum parameter screening method for ergot alkaloids in food and feed. KW - Ergot alkaloids KW - Sum parameter method KW - Hydrazinolysis KW - Esterification PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-527508 DO - https://doi.org/10.3390/toxins13050342 VL - 13 IS - 5 SP - 342 PB - MDPI CY - Basel, Switzerland AN - OPUS4-52750 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian A1 - Wigant, L. A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Weidner, Steffen A1 - Kühn, Gerhard A1 - Geng, Sh. A1 - Erdmann, J. A1 - Gorsler, H.-V. T1 - Plasmavorbehandlungen von Polymeroberflächen T2 - 2. Freiberger Polymertag CY - Freiberg DA - 1995-05-30 PY - 1995 SP - 17 Seiten CY - Freiberg AN - OPUS4-7014 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kühn, B. A1 - Helmerich, Rosemarie A1 - Nussbaumer, A. A1 - Günther, H.-P. A1 - Herion, S. T1 - Beurteilung bestehender Stahltragwerke: Empfehlungen zur Abschätzung der Restnutzungsdauer N2 - Die zunehmende Bedeutung der Nachhaltigkeit im Bauwesen wird in Zukunft das Bauen im Bestand gegenüber Neubauten in den Vordergrund rücken. Dies gilt auch für den Brückenbau, wo das Qualitätsmanagement seit langem Brücken von ihrem Entstehungsgang über den Betrieb bis in die Entsorgung begleitet. Die starke Vergrößerung der Frachtvolumina für Straße und Schiene und die zunehmende Überalterung des Brückenbestandes fragen danach, ob die bestehenden Brücken für die veränderten Betriebsbedingungen noch geeignet sind und wie sie und ob sie dafür instandgesetzt werden könnten. Für die erforderlichen Instandhaltungs- und Instandsetzungsmaßnahmen oder einen eventuellen Ersatz durch einen Neubau ist aber die Frage der Restnutzungsdauer von entscheidender Bedeutung. Es ist daher nicht von ungefähr, dass sich Baulast-träger auf nationaler und internationaler Ebene frühzeitig zusammengetan haben, um nach geeigneten Methoden der Bestimmung der Sicherheit und Restnutzungsdauer bestehender Brücken zu forschen. Auch die internationalen technisch-wissenschaftlichen Verbände wie EKS und fib sowie die Standard-Organisationen ISO und CEN sind der Frage eines internationalen Austauschs und der Vereinheitlichung der Methoden nachgegangen. Für Stahlbrücken hat insbesondere das technische Komitee6 - Ermüdung - der EKS Anregungen aufgegriffen, aus den verschiedenen nationalen Erfahrungen und dem vorhandenen Wissen technische Empfehlungen für die Beurteilung bestehender Stahlbrücken zu entwickeln [1], die sich als Grundlage für die von CEN/TC 250 - das CEN-Komitee für die Bearbeitung der Eurocode - geplante Erweiterung der Eurocode zur Instandhaltung und Instandsetzung des Brückenbestandes eignen. Das Ergebnis ist ein technisch-wissenschaftlicher Bericht, der im Rahmen der Zusammenarbeit der europäischen Kommission (DG-Research - Joint Research Centre JRC) mit der EKS als Basispapier für eine zukünftige Eurocode-Erweiterung veröffentlicht wurde und schon jetzt als Empfehlung für eine Vorgehensweise nach dem Stand der Technik verwendet werden kann. Der vorliegende Beitrag behandelt die Grundzüge dieses Berichtes [1], der vom e-bookshop der Kommission kostenfrei herunter geladen werden kann. PY - 2008 DO - https://doi.org/10.1002/stab.200810072 SN - 0038-9145 SN - 1437-1049 SN - 0932-6375 VL - 77 IS - 8 SP - 595 EP - 607 PB - Ernst CY - Berlin AN - OPUS4-17893 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hellmuth, K.-H. A1 - Klobes, Peter A1 - Meyer, Klaus A1 - Röhl-Kuhn, Barbara A1 - Siitari-Kauppi, M. A1 - Hartikainen, K. A1 - Hartikainen, J. A1 - Timonen, J. T1 - Matrix retardation studies: size and structure of the accessable pore space in fresh and altered crystalline rock N2 - For the assessment of the barrier function of the geosphere around a nuclear waste repository information about the nature of the accessible rock pore space and internal surfaces is needed. Intact samples of various types of fresh and altered crystalline rocks have been studied by means of mercury intrusion porosimetry and gas adsorption methods using various adsorbates. Furthermore, fluorescence microscopy and scanning electron microscopy was applied and the results were compared with those of impregnation with carbon-l4-polymethylmethacrylate (PMMA). Additional structural information was derived from hydraulic conductivity determinations using helium gas. The investigations were focussed on the reliability of these measurements of intact core samples, the influence of rock composition, structure and geological evolution on the microstructure of the matrices and the consequences regarding the retardation properties of the bedrock. PY - 1995 SN - 0303-4534 VL - 23 IS - 5/6 SP - 691 EP - 706 PB - Verl. für Geowissenschaften Wutzke CY - Berlin AN - OPUS4-11979 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -