TY - JOUR A1 - Schubnell, J. A1 - Konidena, S. K. A1 - Jung, M. A1 - Braun, M. A1 - Ehlers, S. A1 - Madia, Mauro A1 - Kannengießer, Thomas A1 - Löschner, D. T1 - Approach for the probabilistic fatigue assessment of welded joints based on the local geometry of the weld seam N2 - Welded joints show large variation of the weld toe geometry along the weld seam, which is one important reason for the comparably large scatter in fatigue life. Therefore, it is crucial to take the local geometry at the weld toe into account, to reduce the conservatism in fatigue assessment of welded joints. This study is based on the IBESS procedure for the calculation of the fatigue strength, whereby the evaluation of local geometrical parameters is carried out by means of 3D surface scans. The approach is validated against 26 fatigue test series. The fatigue life is in general overpredicted, whereas good agreement is achieved for high stress ratio (R = 0.5). A sensitivity analysis conducted with IBESS shows that weld toe radii ρ < 2 mm and flank angle α < 30° have a significant influence on the calculated fatigue strength. In contrast to this, no strong correlation between ρ and the fatigue strength was determined experimentally in this study. KW - 3D Scanning KW - Fatigue Strength KW - Fracture Mechanics KW - IBESS Approach KW - Local Weld Geometry KW - Welded Joints PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-585700 DO - https://doi.org/10.1111/ffe.14170 SN - 8756-758X SP - 1 EP - 20 PB - Wiley AN - OPUS4-58570 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Park, J. A1 - Kim, G. B. A1 - Lippitz, Andreas A1 - Kim, Y. M. A1 - Jung, D. A1 - Unger, Wolfgang A1 - Kim, Y.-P. A1 - Lee, T. G. T1 - Plasma-polymerized antifouling biochips for label-free measurement of protease activity in cell culture media N2 - We report polyethylene glycol (PEG)-grafting antifouling surfaces using a plasma copolymerized (PcP) technique to monitor protease activity in complex media. By varying the mixing ratio of the PEG and ethylenediamine (EDA) precursors, the PcP-PEG-EDA (PcP-PE) film was able to easily control surface amine density with good preservation of the internal PEG structure. We found that nonspecific protein adsorption was dramatically reduced in serum-containing media on the PcP-PE films, as opposed to that on plasma polymerized-EDA (PP-E) films without PEG. When SPR sensor chips coated with PcP-PE film were employed to detect protease activity, biotinylated luciferase probes (luciferase-peptide-biotin) on streptavidin-conjugated SPR chips enabled real-time and label-free measurement of matrix metalloproteinase activity in cell culture media. Owing to its excellent antifouling ability, this newly developed method boasts minimal nonspecific binding and can serve as a biochip platform to promote a wide range of applications in the biological field. KW - Polyethylene glycol (PEG)-grafting antifouling surface KW - Biochip KW - ATR-FTIR spectroscopy KW - XPS KW - NEXAFS KW - Plasma PY - 2019 DO - https://doi.org/10.1016/j.snb.2018.10.123 SN - 0925-4005 VL - 281 SP - 527 EP - 534 PB - Elsevier B.V. AN - OPUS4-46463 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tisato, F. A1 - Refosco, F. A1 - Porchia, M. A1 - Bolzati, C. A1 - Bandoli, G. A1 - Dolmella, A. A1 - Duatti, A. A1 - Boschi, A. A1 - Jung, C. M. A1 - Pietzsch, H.-J. A1 - Kraus, Werner T1 - The Crucial Role of the Diphosphine Heteroatom X in the Stereochemistry and Stabilization of the Substitution-Inert [M(N)(PXP)]2+ Metal Fragments (M = Tc, Re; PXP = Diphosphine Ligand) N2 - The nature of the heteroatom X incorporated in the five-membered PXP-diphosphine bridging chain was found to play a primary unit role both in the overall stability and in the stereochemical arrangement of nitrido-containing [M(N)(PXP)]2+ metal fragments (M = Tc, Re). Thus, by mixing PXP ligands with labile [Re(N)Cl4]- and Tc(N)Cl2(PPh3)2 nitrido precursors in CH2Cl2/MeOH mixtures, a series of neutral M(N)Cl2(PXP) complexes (M = Tc, 1-5; M = Re, 8, 9) was collected. In the resulting distorted octahedrons, PXP adopted facial or meridional coordination, and combination with halide co-ligands produced three different stereochemical arrangements, that is, fac,cis, mer,cis, and mer,trans, depending primarily on the nature of the diphosphine heteroatom X. When X = NH, mer,cis-Tc(N)Cl2(PNP1), 1, was the only isomer formed. Alternatively, when a tertiary amine nitrogen (X = NR; R = CH3, CH2CH2OCH3) was introduced in the bridging chain, fac,cis-M(N)Cl2(PN(R)P) complexes (M = Tc, 2, 3; M = Re, 8f) were obtained. Isomerization into the mer,cis-Re(N)Cl2(PN(R)P), 8m, species was observed only in the case of rhenium when the tertiary amine group carried the less encumbering methyl substituent. fac,cis-Tc(N)Cl2(PSP), 4f, was isolated in the solid state when X = S, but a mixture of fac,cis-Tc(N)Cl2(PSP) and mer,trans-Tc(N)Cl2(PSP), 4m, isomers was found in equilibrium in the solution state. A similar equilibrium between fac,cis-M(N)Cl2(POP) (M = Tc, 5f; M = Re, 9f) and mer,trans-M(N)Cl2(POP) (M = Tc, 5m; M = Re, 9m) species was detected in POP-containing complexes. The molecular structure of all of these complexes was assessed by means of conventional physicochemical techniques including multinuclear NMR spectroscopy and X-ray diffraction analysis of representative mer,cis-Tc(N)Cl2(PN(H)P), 1, fac,cis-Tc(N)Cl2(PSP), 4f, and mer,cis-Re(N)Cl2(PN(Me)P), 8m, compounds. PY - 2004 DO - https://doi.org/10.1021/ic049139r SN - 0020-1669 SN - 1520-510X VL - 43 IS - 26 SP - 8617 EP - 8625 PB - American Chemical Society CY - Washington, DC AN - OPUS4-5546 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kraus, Werner A1 - Walther, M. A1 - Jung, C. M. A1 - Emmerling, Franziska A1 - Pietzsch, H.-J. T1 - Bromotricarbonyl{15-[2-(methylsulfanyl)ethylsulfanyl]pentadecanoic acid-kappa2S,S'}rhenium(I) N2 - The title compound, [ReBr(C18H36O2S2)(CO)3], was synthesized and characterized as a non-radioactive surrogate of a novel Tc-containing fatty acid derivative prepared according to the tricarbonyl/dithioether design with the objective of developing new Tc-based radiopharmaceuticals for the non-invasive diagnosis of myocardial metabolism. The Re chelate contains the metal in the oxidation state +1 and is attached to the terminal position of a fatty acid. The complex formation was accomplished by a ligand exchange reaction using [NBu4]2[Re(CO)3Br3] as starting material. KW - Fatty acid KW - Tc-compound KW - Radio-pharmaceutical PY - 2006 DO - https://doi.org/10.1107/S1600536806024081 SN - 1600-5368 VL - 62 IS - 7 SP - m1660 EP - m1662 PB - Munksgaard CY - Copenhagen AN - OPUS4-12529 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -