TY - GEN A1 - Aßmann, J. A1 - Faßbender, G. A1 - Habermann, H. A1 - Hoppe, Johannes A1 - Hörnig, A. A1 - Loher, E. A1 - Magner, J. A1 - Michel, M. A1 - Oelerich, M. A1 - Recknagel, Christoph A1 - Rode, P. A1 - Sikinger, T. A1 - Tölle, A. A1 - Weitz, D. A1 - Willand, E. A1 - Zscherpe, O. ED - Eilers, M. T1 - H PMMA - Hinweise für die Herstellung von Abdichtungssystemen aus einer Polymerbitumen-Schweißbahn auf einer Versiegelung, Grundierung oder Kratzspachtelung aus PMMA für Ingenieurbauten aus Beton T2 - Erläuterungen zu den ZTV ING Regelwerken N2 - Die Ausführung von Abdichtungssystemen insbesondere an Ingenieurbauwerken der Verkehrsinfrastruktur greift in die unmittelbare Verfügbarkeit/Nutzbarkeit des Bauwerks ein und erfolgt deshalb i.a.R. unter höchstem Zeitdruck. Neuere materialtechnische Entwicklungen im Bereich der Flüssigkunststoff-Systeme erlauben kürzere Ausführungszeiten in einem erweiterten Einsatzspektrum. Zur Sicherstellung anforderungsgerechter Gebrauchseigenschaften des gesamten Brückenabdichtungssystems gibt die vorliegende Veröffentlichung Hinweise für die einzuhaltenden Baugrundsätze, bautechnologische Besonderheiten und Erfordernisse im Umgang mit Polymethylmethacrylat (PMMA) sowie qualitätssichernde Maßnahmen. KW - Schnelle Flüssigkunststoffsysteme KW - Brückenabdichtung PY - 2018 SN - 978-3-86446-224-5 VL - FGSV-Band 775 SP - 1 EP - 20 PB - FGSV-Verlag CY - Köln AN - OPUS4-47091 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Miccoli, L. A1 - Fontana, P. A1 - Qvaesching, D. A1 - Kreft, O. A1 - Hoppe, Johannes A1 - Meng, Birgit T1 - UHPC-AAC facade elements: Structural design, production technology and mechanical behavior T2 - ICAAC 6th International Conference on Autoclaved Aerated Concrete N2 - The aim of this study was to develop a lightweight composite facade element for new buildings and for the refurbishment of existing facades. These composite elements have been developed combining an insulation layer of autoclaved aerated concrete (AAC) with an external ultrahighperformance concrete (UHPC) supporting layer. This solution allows avoiding the use of connectors and facilitates the production procedure. The structural behavior of the facade elements is mainly influenced by the presence of the upturning edges that are able to increase the stiffness of the element and reduce the thickness of the external layer. The insulation material has no influence on the structural behavior of the UHPC boxes. Flexural tests were carried out to investigate a potential detachment of the external layer from the upturning edge. The photogrammetric Analysis used during the flexural tests essentially confirmed that the bond between the two UHPC layers cast in two steps is reliable. The quality of the bond between the external layer and the upturning edge is a key parameter to define the bearing capacity of the element. T2 - ICAAC 6th International Conference on Autoclaved Aerated Concrete CY - Potsdam, Germany DA - 04.09.2018 KW - Autoclaved aerated concrete KW - Flexural testing KW - Photogrammetric analysis KW - Production technology KW - Ultrahigh-performance concrete PY - 2018 SN - 978-3-433-03276-3 DO - https://doi.org/10.1002/cepa.854 VL - 2 IS - 4 SP - 483 EP - 488 PB - Wilhelm Ernst & Sohn - Verlag für Architektur und technische Wissenschaften GmbH & Co. KG CY - Berlin, Germany AN - OPUS4-47588 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -