TY - JOUR A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Walentowski, Heinz-Ulrich T1 - Crosslinking Instead of Glassy Transition N2 - In processing fibre-reinforced composites, the curing reaction can be significantly retarded if the temperature and reaction time are not optimally set. In such situations, complete curing is sometimes impossible under practically relevant conditions. It is difficult for processors to recognize or detect incomplete curing. The equilibrium glass transition temperature plays an important role in complete curing in the production process. PY - 2000 SN - 0945-0084 VL - 90 IS - 4 SP - 33 EP - 35 PB - Hanser CY - München AN - OPUS4-822 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Walentowski, Heinz-Ulrich T1 - Vernetzen statt Verglasen PY - 2000 UR - http://www.kunststoffe.de/ku/default.asp SN - 0023-5563 VL - 90 IS - 4 SP - 90 EP - 92 PB - Hanser CY - München AN - OPUS4-823 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Mc Hugh, Jarlath A1 - Schmachtenberg, E. A1 - Töpker, J. T1 - RTM Process optimization using incorporated ultrasonic sensors T2 - 5. Internationale AVK-TV Tagung für Verstärkte Kunststoffe und Duroplastische Formmassen ; 5th International AVK-TV Conference on Reinforced Plastics and Thermoset Moulding Compounds CY - Baden-Baden, Germany DA - 2002-09-17 PY - 2002 SP - B10-1-B10-10 CY - Frankfurt am Main AN - OPUS4-1853 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Kelm, Jürgen A1 - Fritsch, Sebastian T1 - Kontrolle der Kautschukvulkanisation im Werkzeug mit Ultraschall N2 - Zusammenfassung In diesem Beitrag wird zunächst die für die on-line Prozesskontrolle an duroplastischen Formmassen entwickelte Ultraschallmesstechnik vorgestellt. Die Methode basiert auf der Durchschallung des vernetzenden Materials mit Hilfe von in das Werkzeug integrierten druck- und temperaturfesten 4 MHz-Ultraschallsensoren. Die Auswertung von Schalllaufzeit und Signalamplitude erfolgt vollautomatisch und dient der Berechnung von Schallgeschwindigkeit und -dämpfung. Beide Größen repräsentieren die änderung der mechanischen Eigenschaften infolge der Vernetzungsreaktion. Durch Anwendung auf vulkanisierende Materialien sollte die Anwendbarkeit der bewährten Methode erweitert werden. Im Ergebnis wird gezeigt, dass die Größe des Messeffekts von der Menge an Vernetzer (Schwefelkonzentration) abhängt. Bei ausreichend hohem Vernetzungsgrad zeigt die Ultraschallgeschwindigkeit signifikante, gut auswertbare Resultate, die den Ablauf der Vulkanisation on-line zu verfolgen gestatten. Ein Vergleich mit Vulkameterkurven zeigt große ähnlichkeiten und berechtigt zu der Hoffnung, dass die Methode industriellen Einsatz finden kann. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Prozesskontrolle KW - Vulkanisation KW - Vulkameter KW - Ultraschall KW - Schallgeschwindigkeit PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p21/p21.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1857 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Mc Hugh, Jarlath A1 - Bartusch, Jürgen T1 - Ultrasound on-line cure monitoring for industrial applications N2 - In recent years eure monitoring with ultrasonic methods became more important. An on-line measurement System for industrial applications is presented in this paper. It operates in through-transmission and the measured parameters are the sound velocity and the attenuation of the sound wave. An objective of this paper is to establish the ränge of possible applications for an ultrasonic eure monitoring System. KW - Ultrasonic monitoring KW - Cure process KW - Composite material KW - Process controlling PY - 2000 SN - 0963-6935 PB - Woodhead Publ. CY - Cambridge AN - OPUS4-1061 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Kelm, Jürgen T1 - Ultraschall on-line Prozesskontrolle bei der Vulkanisation KW - Prozesskontrolle KW - Vulkanisation KW - Ultraschall KW - Sensoren KW - Schubmodul KW - Verlustmodul PY - 2000 SN - 0948-3276 SN - 0022-9520 SP - 9 Seiten PB - Hüthig CY - Heidelberg AN - OPUS4-997 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Goering, Harald A1 - Knappe, S. A1 - Mc Hugh, Jarlath A1 - Opfermann, J. T1 - Der RTM-Prozess und die Probleme von Gelierung, Verglasung und Aushärtegrad T2 - 6. Internationale AVK-TV Tagung für Verstärkte Kunststoffe und Duroplastische Formmassen ; 6th International AVK-TV Conference for Reinforced Plastics and Thermoset Moulding Compounds CY - Baden-Baden, Deutschland DA - 2003-10-07 KW - Epxidharz KW - Compositbauteil KW - Vernetzungsreaktion PY - 2003 VL - 6 SP - C14-1-C14-16 PB - AVK-TV CY - Frankfurt am Main AN - OPUS4-3034 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fengler, Petra A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Mc Hugh, Jarlath T1 - Coupling of hidden ultrasound sensors to a moulding tool N2 - Ultrasound on-line NDT methods have been demonstrated as a useful tool for monitoring the curing reaction of thermosets. In order to achieve this ultrasound sensors are incorporated into compression, injection and RTM (resin transfer) mould. For many commercial products imprints or any surface markings upon the moulded product are undesirable. Due to its physical properties ultrasound has a large advantage over other techniques for similar applications. The sound wave can pass through the wall of the mould and direct contact with the moulded part is not required. In this particular case one fundamental problem is a good coupling of the sensors to the mould wall. Several mediums came into question but because of the high technical (e. g. temperature and long time stability) and practical demands, it was decided that dry (non-fluid) coupling would be the most promising candidate. A handful of coupling foils suitable also at high temperatures and for long time application under industrial conditions were tested and are presented in this paper. KW - Sensors KW - Ultrasound KW - Mould wall coupling KW - Thermoset manufacturing PY - 2004 UR - http://www.ndt.net/article/v09n03/stark/stark.htm SN - 1435-4934 VL - 9 IS - 3 SP - 1 EP - 10 PB - NDT.net CY - Kirchwald AN - OPUS4-3316 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Stark, Wolfgang T1 - Ultrasonic Production Control N2 - Ultrasound waves penetrate solid objects without damaging them. Their fields of application range from the imaging of internal organs in medicine, to interior testing of mechanical and chemical engineering components. However, ultrasonic systems can also be used to visualise the way the mechanical properties of reactive resins change during processing in the mould. PY - 2001 SN - 0945-0084 VL - 91 IS - 1 SP - 35 EP - 36 PB - Hanser CY - München AN - OPUS4-2135 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Bartusch, Jürgen A1 - Mc Hugh, Jarlath T1 - Contribution to ultrasound cure control for composite manufacturing N2 - The curing conditions play an important role in the quality assurance of composite products. Especially as composite materials are widely used in high tech areas so that they are required to fulfil high quality Standards. Some problems which occur during curing, for instance undercuring, can hardly be detected using Standard NDT investigations, mainly because they are manifested only at high temperatures, particularly close to glass-rubber-transition. On-line eure monitoring has the outstanding advantage that it can monitor the material parameters even at the highest temperatures possible. In recent years eure monitoring with ultrasonic methods has become more populär. In comparison to dielectric methods mechanical parameters are measured directly. The quantities to be measured are the velocity and the attenuation of the sound wave. On this basis the storage and loss modulus can be calculated. Depending on the form of excitation with longitudinal or transversal waves these moduli are referred to as long wave or shear modulus. Well developed Computer based technology and sensor materials are available in the non-destructive testing (NDT) market. The measuring equipment employed a commercial NDT System, which worked computer-aided. With a special Software the demands of automatic Operation under industrial conditions was accomplished. This measurement equipment was tested on composites. Its structure, performance and some practical results will be presented in the following paper. T2 - 15th World Conference on Non-Destructive Testing (WCNDT) CY - Roma, Italy DA - 15.10.2000 PY - 2000 UR - http://www.ndt.net/article/wcndt00/papers/idn482/idn482.htm SN - 1435-4934 VL - 5 IS - 11 PB - NDT.net CY - Kirchwald AN - OPUS4-2136 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Stark, Wolfgang T1 - Produktionskontrolle mit Ultraschall N2 - Ultraschallwellen durchdringen Festkörper, ohne sie zu schädigen. Der Einsatzbereich von Ultraschall reicht von der Darstellung der inneren Organe in der Medizin bis zur Prüfung des Inneren von Bauteilen im Maschinen- und Anlagenbau. Ultraschall-Systeme können jedoch auch genutzt werden, um sichtbar zu machen, wie sich mechanische Eigenschaften von Reaktionsharzen während ihrer Verarbeitung im Werkzeug verändern. PY - 2001 UR - http://www.kunststoffe.de/directlink.asp?KU101838 SN - 0023-5563 VL - 91 IS - 1 SP - 83 EP - 85 PB - Hanser CY - München AN - OPUS4-2137 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Mc Hugh, Jarlath A1 - Stark, Wolfgang A1 - Kürten, C. T1 - Mit Ultraschall sieht man mehr - Kontrolle von Werkzeugfüllung und Vernetzungsreaktion beim Harzinjektionsverfahren RTM T2 - Poster-Ausstellung "Sensorik in der BAM" CY - Berlin, BAM, Deutschland DA - 2002-10-01 PY - 2002 SP - 1(?) AN - OPUS4-2114 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Mc Hugh, Jarlath A1 - Bartusch, Jürgen A1 - Fengler, Petra T1 - Rheologische und akustische Bestimmung der Fließ-Härtungseigenschaften von Injektionsharzen N2 - Zusammenfassung Der Ausgangspunkt für diese Arbeiten ist eine in [1] beschriebene Ultraschall-(US)-Sensorik zur Aushärtungskontrolle. Sie wurde für rieselfähige Formmassen entwickelt [2,3]. Darauf aufbauend ist es das Ziel der vorliegenden Arbeit, die Voraussetzungen für den Einsatz dieser Sensorik beim Harzinjektionsverfahren zu schaffen und ihre Kalibrierung durch rheologische und DSC-Messungen zu ermöglichen. Der erste Teil des Beitrages beschäftigt sich mit dem technologischen Ablauf des Harzinjektionsverfahren und den Einsatzmöglichkeiten der US-Sensorik bei dieser Technologie. Ergebnisse von Schallgeschwindigkeits- und Dämpfungsmessungen für EP-Harze werden vorgestellt. Im zweiten Teil wird auf das Kalibrieren der US-Sensorik für den Verarbeiter eingegangen. Es kann mittels der bisherigen Prozessführung oder durch Vergleich mit den Ergebnissen anderer Mess-Verfahren wie Rheometer- oder Differential-Scanning-Calerometry-(DSC)-Messungen erfolgen. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Ultraschall KW - Harzinjektionsverfahren KW - RTM KW - Prozesskontrolle KW - Aushärtung PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v51/v51.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1913 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Kelm, Jürgen A1 - Fritsch, Sebastian ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - Rubber processing monitored by ultrasound T2 - 11th International Symposium on Nondestructive Characterization of Materials CY - Berlin, Germany DA - 2002-06-24 PY - 2003 SN - 3-540-40154-7 SP - 659 EP - 664 PB - Springer CY - Berlin AN - OPUS4-2769 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mc Hugh, Jarlath A1 - Stark, Wolfgang A1 - Döring, Joachim ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - Evaluation of the cure behaviour of epoxy resin using rheometric and ultrasonic techniques T2 - 11th International Symposium on Nondestructive Characterization of Materials CY - Berlin, Germany DA - 2002-06-24 PY - 2003 SN - 3-540-40154-7 SP - 651 EP - 658 PB - Springer CY - Berlin AN - OPUS4-2772 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim T1 - Grundlagen zur Charakterisierung von Harzsystemen und deren Verarbeitungsprozessen mit Ultraschall T2 - IKV-Seminar, Innovative Prozessentwicklung in der Produktion endlosfaserverstärkter Kunststoffe CY - Aachen, Germany DA - 2005-06-28 PY - 2005 AN - OPUS4-7605 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim T1 - Grundlagen zur Charakterisierung von Harzsystemen und deren Verarbeitungsprozessen mittels Ultraschall T2 - IKV-Seminar "Innovative Prozessentwicklungen in der Produktion endlosfaserverstärkter Kunststoffe CY - Aachen, Deutschland DA - 2005-06-28 PY - 2005 SP - 17 Seiten PB - RWTH Aachen CY - Aachen AN - OPUS4-7624 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beckmann, Jörg A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Zscherpel, Uwe A1 - Ewert, Uwe A1 - Erhard, Anton T1 - Time Domain Spectroscopy Techniques for Non Destructive Contact less Flaw Detection and Imaging in Advanced Materials T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - Time domain spectroscopy KW - Air coupled ultrasound KW - Pulsed THz radiation system KW - Pulse compression KW - THz imaging PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 8(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-13874 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Stark, Wolfgang T1 - Überwachung des Harzinjektionsverfahrens mit Ultraschall-Sensoren bei der Produktion von LKW-Hochdächern T2 - Kolloquium der Abteilung VI CY - Berlin, Germany DA - 2003-02-13 PY - 2003 AN - OPUS4-4553 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Gaal, Mate A1 - Erhard, Anton A1 - Bovtun, Viktor Petrovic A1 - Yakymenko, Y. T1 - High Voltage Excitation of Ferroelectret Ultrasonic Transducers: Advantages and Limitations T2 - EMF 2011 European Meeting on Ferroelectricity CY - Bordeaux, France DA - 2011-06-26 PY - 2011 AN - OPUS4-26213 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -