TY - CONF A1 - Lehmann, Jens T1 - Verfleckungen auf nichtrostenden Stählen - eine aktuelle Herausforderung T2 - Praktikertagung im Metallhandwerk CY - Braunschweig, Germany DA - 2010-11-19 PY - 2010 AN - OPUS4-21897 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mietz, Jürgen A1 - Burkert, Andreas A1 - Lehmann, Jens A1 - Eich, G. ED - Castro-Borges, P. ED - Moreno, E.I. ED - Sakai, K. ED - Gjorv, O.E. ED - Banthia, N. T1 - Risk of stress corrosion cracking of prestressing steels in contact with galvanized components T2 - CONSEC`10 - 6th International conference on concrete under severe conditions CY - Mérida, Yucatán, Mexico DA - 2010-06-07 KW - Prestressing steel KW - Galvanized elements KW - Galvanic corrosion KW - Hydrogen evolution KW - Hydrogen-induced stress corrosion cracking PY - 2010 SN - 978-0-415-59316-8 VL - 1 SP - 239 EP - 246 PB - Taylor & Francis CY - London, UK AN - OPUS4-22037 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Nichtrostende Stähle im Bauwesen - Neue Ansätze zur korrosionsschutzgerechten Werkstoffauswahl Z-30.3-6 T2 - Wissenschaft trifft Handwerk - Neue Werkstoffe und Verfahren auf der Baustelle, Berlin HWK, Innung Metall- und Kunststofftechnik CY - Berlin, Germany DA - 2010-09-22 PY - 2010 AN - OPUS4-22088 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Burkert, Andreas A1 - Lehmann, Jens A1 - Wilbert, Hans-Peter T1 - Edelstahl Rostfrei - Korrosionserscheinungen beim Einsatz im Außenbereich KW - Nichtrostender Stahl KW - Bauwesen KW - Dauerhaftigkeit KW - Korrosion PY - 2010 SN - 0178-6571 VL - 10 SP - 34 EP - 36 PB - Montan- u. Wirtschaftsverlag GmbH CY - Düsseldorf AN - OPUS4-22196 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Beck, Matthias A1 - Isecke, Bernd A1 - Lehmann, Jens T1 - Modelling of reinforcement corrosion - Influence of concrete technology on corrosion development N2 - Reinforcement corrosion is influenced by different parameters like resistivity of concrete, setting conditions and also by concrete technology. Moreover the presence of cathodic areas and the possibility of unhampered cathodic reaction influences the reinforcement corrosion. In this paper the development of corrosion without large cathodic areas, called self-corrosion, considering different concrete parameters, is studied. KW - Korrosion von Stahl in Beton, Zement-, Chlorid-, Wasser KW - Bindemitteleinfluß KW - Potentialverlauf KW - Polarisationswiderstand PY - 2006 DO - https://doi.org/10.1002/maco.200604018 SN - 0947-5117 SN - 1521-4176 VL - 57 IS - 12 SP - 914 EP - 919 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-14468 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Einsatz verzinkter Einbauteile in vorgespannten Betonfertigteilen T2 - Sitzung des projektbegleitenden Ausschusses "Verzinkte Bauteile im Kontakt mit Spanngliedern", Westfälische Drahtindustrie GmbH CY - Hamm, Germany DA - 2007-05-10 PY - 2007 AN - OPUS4-14868 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Korrosionsverhalten von Edelstahl Rostfrei T2 - Berufsschullehrer-Fortbildungsseminar "Seminar Edelstahl Rostfrei" CY - Nuremberg, Germany DA - 2007-05-23 PY - 2007 AN - OPUS4-14870 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Korrosionsverhalten von Edelstahl Rostfrei T2 - Metallbautechnisches Kolloquium "Verarbeitung von Edelstahl Rostfrei - Umsetzung im Lernfeldunterricht" CY - Bruchsal, Germany DA - 2007-06-13 PY - 2007 AN - OPUS4-14949 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Untersuchungen zum Einbau verzinkter Teile in Spannbeton T2 - GfKORR-Arbeitskreissitzung "Korrosion im Bauwesen" CY - Heligoland, Germany DA - 2007-06-11 PY - 2007 AN - OPUS4-14987 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Burkert, Andreas A1 - Lehmann, Jens A1 - Burkert, Annette A1 - Mietz, Jürgen A1 - Eich, Gerd T1 - Verzinkte Bauteile im Kontakt mit Spanngliedern T2 - 4. Kolloquium des Kuratoriums Korrosionsschutz (KKF) CY - Düsseldorf, Deutschland DA - 2007-06-20 KW - Spannbeton KW - Spannstahl KW - Wasserstoffinduzierte Spannungsrisskorrosion KW - Verzinkte Einbauteile KW - Zink KW - DIN 1045 PY - 2007 SN - 978-3-935406-34-5 SP - 12 EP - 25 PB - GfKORR CY - Frankfurt am Main AN - OPUS4-15018 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Damit Edelstahl rostfrei bleibt - Korrosionsschutzgerechte Verarbeitung von Edelstahl Rostfrei T2 - Praktikertagung im Metallhandwerk, Handwerkskammer CY - Dresden, Germany DA - 2007-11-09 PY - 2007 AN - OPUS4-16052 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Damit Edelstahl rostfrei bleibt - Korrosionsschutzgerechte Verarbeitung von Edelstahl Rostfrei T2 - Praktikertagung im Metallhandwerk, Handwerkskammer CY - Regensburg, Germany DA - 2007-11-29 PY - 2007 AN - OPUS4-16053 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Damit Edelstahl rostfrei bleibt - Korrosionsschutzgerechte Verarbeitung von Edelstahl Rostfrei T2 - Jahrestagung DVS Bezirksverband Riesa - Meißen - Großenhain CY - Dresden, Germany DA - 2008-03-01 PY - 2008 AN - OPUS4-16703 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Edelstahl rostfrei - Korrosionsverhalten und Schadensvermeidung T2 - Praxisseminar "Fachgerechte Auswahl und Verarbeitung von Edelstahl Rostfrei", DVS Bezirksvorstand Ostwestfahlen-Lippe CY - Bielefeld, Germany DA - 2008-03-07 PY - 2008 AN - OPUS4-16704 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Damit Edelstahl rostfrei bleibt - Korrosionsschutzgerechte Verarbeitung von Edelstahl Rostfrei T2 - Praktikertagung im Metallhandwerk, Handwerkskammer Regensburg CY - Regensburg, Germany DA - 2008-02-27 PY - 2008 AN - OPUS4-16705 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Burkert, Andreas A1 - Mietz, Jürgen A1 - Lehmann, Jens A1 - Eich, Gerd A1 - Burkert, Annette T1 - Verzinkte Bauteile in Kontakt mit Spanngliedern (Abschlussbericht für den Zeitraum 01.02.2005 bis 31.10.2007; Forschungsvorhaben 14218 N / 1) KW - Spannbeton KW - Spannstahl KW - Wasserstoffinduzierte Spannungsrisskorrosion KW - Verzinkte Einbauteile PY - 2007 SP - 1 EP - 42 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-16694 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mietz, Jürgen A1 - Burkert, Andreas A1 - Lehmann, Jens A1 - Burkert, Annette A1 - Eich, Gerd T1 - Galvanised constructional elements in contact with prestressing steel tendons N2 - In order to clarify under which practical conditions real risks for hydrogen-induced stress corrosion cracking of prestressing steels exist laboratory investigations in aqueous solutions and concrete as well as tests with stressed prestressing steels were carried out. While different distances between steel and zinc (cathode and anode) showed only a negligible influence on the polarisation of the steel a significant dependence on the area ratio steel/zinc was observed. A critical area ratio of 10:1 can be defined above which polarisation of the steel to hydrogen evolution potentials is unlikely. The results obtained in the laboratory concerning the critical area ratio were confirmed by on-site investigations in a precasting plant. Exposure tests with hydrogen loading did not lead to fractures during the testing time for approved prestressing steels. The characteristic mechanical values determined immediately after the hydrogen loading tests did not show significant changes. Thus, an indirect contact between prestressing steels and galvanised elements can be estimated as uncritical. But a direct contact has to be excluded by compliance with DIN 1045-1, i.e minimal distance of 2 cm between prestressing steel and galvanised elements. PY - 2008 DO - https://doi.org/10.1002/maco.200804114 SN - 0947-5117 SN - 1521-4176 VL - 59 IS - 2 SP - 131 EP - 138 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-16724 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Klapper, Helmuth Sarmiento A1 - Burkert, Andreas A1 - Burkert, Annette A1 - Lehmann, Jens A1 - Villalba, A.L. T1 - Influence of surface treatments on the pitting corrosion of type 304 stainless steel by electrochemical noise measurements N2 - Surface treatments usually are used to modify the appearance and properties of stainless steel surfaces. Simultaneously, the corrosion resistance of the stainless steel surface being related intrinsically to the spontaneous formation of a passive layer also will be affected. In this respect, the influence of different surface treatments on the corrosion resistance of Type 304 (UNS S30400) stainless steel to pitting corrosion has been evaluated by means of potentiostatic electrochemical noise measurements and surface characterization. Typical industrial treatments including mechanical grinding, glass blasting, and pickling were taken into account. Additionally, special consideration was put on the effect of aging conditions of the passive layer after surface treatments, in particular on the relative humidity. Benefits and limitations of the different applied surface treatments concerning protectiveness of the stainless steel surface were determined and discussed. KW - Corrosion KW - Electrochemical noise KW - Pitting corrosion KW - Stainless steel KW - Surface treatment PY - 2011 DO - https://doi.org/10.5006/1.3613641 SN - 0010-9312 SN - 1938-159X VL - 67 SP - 075004-1 EP - 075004-13 PB - National Association of Corrosion Engineers CY - Houston, Tex. AN - OPUS4-24247 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lehmann, Jens T1 - Einsatz nichtrostender Stähle als Befestigungsmittel im Beton T2 - Befestigungsmittel im Stahlbetonbau - Planung - Werkstoffe - Zulassungen CY - Rostock, Germany DA - 2011-11-03 PY - 2011 AN - OPUS4-24314 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gümpel, P. A1 - Leu, F. A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Corrosion resistance of lean alloy alternatives for 300 series stainless steels N2 - Rising Prices of nickel and molybdenum in the past few years have led to unprecedented interest in Substitution of leaner-content alloys for Standard 300-series austenitic stainless steels in a lot of applications. Due to the high prices of different alloying elements and to periodic large fluctuations that cause similar large fluctuations in the costs of using 300-series stainless steels; a lot of new materials entered the markets in Europe and also in the rest of the world. A big disadvantage consists in the fact that there are though corrosion results that, however, a direct comparison of the corrosion resistance of these new materials does not exist up to now or only incompletely. In this project comparative investigations were carried out and always one or several representatives of a material group were incorporated. These material groups are: Lean Duplex Stainless Steels, Manganese Alloyed Austenitic and Duplex Stainless Steels and Ferritic Stainless Steels. These materials were investigated in a lot of different test procedures and in different conditions focused on the application in civil engineering and common use. Beside the electrochemical investigations all materials were exposed in different surface States in the atmosphere, once in Coastal nearness and once in a city centre area. Other exposition tests with material Coupons where done in the atmosphere of indoor swimming pools and at the case of food processing machines were corrosion processes are caused by the cleaning procedure. First results are reported. T2 - 7th European stainless steel conference - science and market CY - Como, Italy DA - 21.09.2011 KW - Austenitic stainless steels KW - Ferritic stainless steels KW - Duplex stainless steels KW - Manganese alloyed stainless steels KW - Pitting corrosion KW - Stress corrosion cracking KW - Passive layer KW - Surface condition PY - 2011 SN - 978-88-85298-84-2 IS - Applications / No. 53 SP - 1 EP - 15 AN - OPUS4-24803 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Fischer, Joachim A1 - Lehmann, Jens T1 - Anforderungen an den Korrosionsschutz durch makro- und mikroklimatische Einflussfaktoren T2 - 3-Länder-Korrosionstagung - Korrosion und Korrosionsschutzmaßnahmen von Verkehrsinfrastrukturen: Eisenbahnen, Seilbahnen, Straßen, Tunnel und Brücken CY - Dübendorf, Schweiz DA - 2012-04-26 KW - Atmosphärische Korrosion KW - Normen und Regelwerke KW - Korrosivitätsklassen KW - Expositionsklassen KW - Werkstoffauswahl PY - 2012 SN - 978-3-935406-48-2 SP - 5 EP - 15 PB - DECHEMA AN - OPUS4-25840 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lehmann, Jens T1 - Oberfläche oder Legierungsgehalt - was bestimmt die Beständigkeit nichtrostender Stähle? T2 - ISC 2012 (Internationale Sales Conference) CY - Hanover, Germany DA - 2012-05-30 PY - 2012 AN - OPUS4-25958 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Burkert, Andreas A1 - Lehmann, Jens A1 - Burkert, Annette A1 - Mietz, Jürgen T1 - Damage of stainless steel bars due to atmospheric corrosion N2 - In addition to constructional requirements in civil engineering stainless steels often have to fulfil high visual demands. Unexpected impairments of the visual appearance of stainless steels under low corrosive conditions are a widespread problem today. Frequently it is supposed that this is caused by changes in the alloy composition, worse environmental conditions or improper handling. Within a research project the systematic investigation of several cases of damaged stainless steel bars has shown that the reasons are based on well-known material defects like chemical inhomogeneities (e.g. precipitations or local carburization) or geometrical defects (e.g. undercuts, rolling defects or shell formation). Thus, the failures could be clearly identified as production failures of the respective semi-finished products. KW - Atmospheric corrosion KW - EPR test KW - Failure KW - Intercrystalline corrosion KW - Stainless steel KW - Nichtrostender Stahl KW - Werkstoffauswahl KW - Dauerhaftigkeit KW - Korrosion PY - 2012 DO - https://doi.org/10.1002/maco.201005701 SN - 0947-5117 SN - 1521-4176 VL - 63 IS - 3 SP - 264 EP - 270 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-25702 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Burkert, Andreas A1 - Fischer, Joachim A1 - Zietelmann, Christina A1 - Lehmann, Jens T1 - Sauber! - Erhaltung des Korrosionsschutzes bei 'rostfreiem Stahl' N2 - Es ist mittlerweile eine zunehmend bekannte Tatsache, dass „nichtrostende“ Stähle trotz ihres Namens rosten können. Werden die spezifischen Besonderheiten und Anforderungen, die sich beim Einsatz nichtrostender Stähle ergeben, aus Unkenntnis oder Nachlässigkeit nicht beachtet, kann dies zu unerwarteten Korrosionserscheinungen und auch zum funktionalen Versagen von Konstruktionen führen. Im Folgenden wird dargestellt, dass nichtrostende Stähle nur dann korrosionsbeständig bleiben, wenn auch Reinigung und Pflege der Oberflächen mehr Beachtung finden. Bereits in der Planungsphase, spätestens aber bei der Ausführung muss klar sein, wie mit den Oberflächen urngegangen werden soll, um ihre positiven Eigenschaften zu erhalten. Nicht zuletzt müssen auch die Betreiber und Nutzer wissen, dass nichtrostende Stähle in vielen Bereichen erheblichen Pflege- und Erhaltungsbedarf haben. KW - Nichtrostender Stahl KW - Austenit KW - Ferrit KW - Lean Duplex KW - Korrosionsverhalten PY - 2011 VL - III SP - 9 EP - 14 PB - Bernheine AN - OPUS4-26059 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -