TY - JOUR A1 - Mühler, T. A1 - Heinrich, J. A1 - Wirth, Cynthia A1 - Günster, Jens T1 - Slurry-based additive manufacturing of ceramics N2 - Most additive manufacturing (AM) techniques have in common that material is spread out as thin layers of a dried powder/granulate by a roller or a shaker system. These layers are mostly characterized by a low packing rate. On the other hand, appreciable densities can be reached by the use of ceramic slurries. In this context, the layer-wise slurry deposition (LSD) has been developed. Specific features of the LSD process are reflected on the basis of already existing additive manufacturing technologies. The microstructure of laser-sintered bodies will be discussed, and strategies for an improved microstructure during sintering will be introduced. KW - Additive manufacturing KW - Ceramic KW - Selective laser sintering PY - 2015 U6 - https://doi.org/10.1111/ijac.12113 SN - 1546-542X SN - 1744-7402 N1 - Geburtsname von Wirth, Cynthia: Gomes, C. M. - Birth name of Wirth, Cynthia: Gomes, C. M. VL - 12 IS - 1 SP - 18 EP - 25 PB - American Ceramic Soc. CY - Westerville, Ohio AN - OPUS4-29937 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günster, Jens A1 - Xin, L. A1 - Bungartz, M. A1 - Maenz, S. A1 - Kopsch, V. A1 - Bossert, J. A1 - Bischoff, S. A1 - Adolph, J. A1 - Schubert, H. A1 - Brinkmann, O. A1 - Jandt, K.D. A1 - Kinne, R. W. A1 - Kunisch, E. T1 - Decreased extrusion of calcium-phosphate versus high viscosity PMMA cement into spongious bone marrow may be suitable for the reduction of adverse effects - an ex vivo study in sheep cadaver vertebrae T2 - BioMat 2015 CY - Weimar, Germany DA - 2015-04-21 PY - 2015 AN - OPUS4-34879 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günster, Jens A1 - Zocca, Andrea A1 - Mühler, Th. T1 - Dense Powder beds for powder-based additive manufacturing of ceramics T2 - EUROMAT 2015 CY - Warsaw, Poland DA - 2015-09-20 PY - 2015 AN - OPUS4-34863 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günster, Jens A1 - Mühler, Th. A1 - Heinrich, J. G. T1 - Additive Manufacturing - Strategies for the Selective Volume Sintering of Ceramics T2 - 11th Int. Conf. on Ceramics Materials and Composites for Energy and Environmental Applications CMCee CY - Vancouver, Canada DA - 2015-06-14 PY - 2015 AN - OPUS4-34865 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günster, Jens T1 - Dense Powder beds for powder-based additive manufacturing of ceramics T2 - 11th Int. Conf. on Ceramics Materials and Composites for Energy and Environmental Applications CMCee CY - Vancouver, Canada DA - 2015-06-14 PY - 2015 AN - OPUS4-34867 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günster, Jens A1 - Colombo, P. A1 - Franchin, G. A1 - Zocca, Andrea A1 - Wirth, Cynthia A1 - Bernardo, E. A1 - Lopez-Heredia, A. A1 - Knabe, C. T1 - Three dimensional printing of preceramic polymers and fillers T2 - 39th International Conference and Expo on Advanced Ceramics and Composites CY - Daytona Beach, FL, USA DA - 2015-01-25 PY - 2015 N1 - Geburtsname von Wirth, Cynthia: Gomes, C. M. - Birth name of Wirth, Cynthia: Gomes, C. M. AN - OPUS4-32496 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günster, Jens A1 - Heinrich, J. G. A1 - Mühler, Th. A1 - Zocca, Andrea A1 - Wirth, Cynthia T1 - Dense powder beds for powder-based additive manufacturing of ceramics T2 - 39th International Conference and Expo on Advanced Ceramics and Composites CY - Daytona Beach, FL, USA DA - 2015-01-25 PY - 2015 N1 - Geburtsname von Wirth, Cynthia: Gomes, C. M. - Birth name of Wirth, Cynthia: Gomes, C. M. AN - OPUS4-32497 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günster, Jens A1 - Lüchtenborg, J. A1 - Mühler, Th. A1 - Melcher, J. T1 - Strategies for Laser Powered Heat Engines utilizing Refractories for Energy Conversion T2 - 39th International Conference and Expo on Advanced Ceramics and Composites CY - Daytona Beach, FL, USA DA - 2015-01-25 PY - 2015 AN - OPUS4-32498 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günster, Jens A1 - Mühler, Th. A1 - Heinrich, J. G. T1 - Additive Manufacturing - Strategies for the Selective Volume Sintering of Ceramics T2 - 39th International Conference and Expo on Advanced Ceramics and Composites CY - Daytona Beach, FL, USA DA - 2015-01-25 PY - 2015 AN - OPUS4-32499 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günster, Jens A1 - Araujo, M. D. A1 - Steinborn, Gabriele A1 - Acchar, W. A1 - Wirth, Cynthia T1 - Rheological properties of aqueous based ZrO2 slurries for Additive Manufacturing T2 - 39th International Conference and Expo on Advanced Ceramics and Composites CY - Daytona Beach, FL, USA DA - 2015-01-25 PY - 2015 N1 - Geburtsname von Wirth, Cynthia: Gomes, C. M. - Birth name of Wirth, Cynthia: Gomes, C. M. AN - OPUS4-32500 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -