TY - JOUR A1 - Rurack, Knut A1 - Schulz, Burkhard A1 - Reck, Günter A1 - Resch-Genger, Ute A1 - Bricks, J. A1 - Maus, M. T1 - Substituted 1,5-Diphenyl-3-benzothiazol-2-yl-Delta2-pyrazolines - Synthesis, X-ray Structure, Photophysics, and Cation Complexation Properties N2 - The spectroscopic properties of 1-phenyl-3-benzothiazol-2-yl-5-(4-R-phenyl)-2-pyrazolines are strongly dependent on both the electronic nature of the substituent R and solvent polarity. As revealed by spectroscopic studies as a function of solvent polarity as well as temperature, for electron-rich amino donor substituents in polar solvents, deactivation of the strongly emissive charge transfer (CT) state of the basic 1-phenyl-3-benzothiazol-2-yl-2-pyrazoline chromophore has to compete with a fast intramolecular electron transfer (ET) quenching reaction. In the case of the dimethylamino derivative (R = DMA), the rate constant of ET in acetonitrile was determined to ket = 3 × 1010 s-1. This ET process can be utilized for metal ion sensing by introducing nitrogen containing aza crown ether receptor units to the 4-position of the 5-phenyl group. The spectroscopically determined ET rates of the 5-(N-alkyl)anilino substituents, a DMA, a tetrathia- (AT415C5), and a tetraoxa-monoaza-15-crown-5 (A15C5) group, correlate with electrochemical data and increase in the order AT415C5 < A15C5 < DMA. The metal ion sensing abilities of the two crowned derivatives are presented, and the different signaling mechanisms include binding to the crown ether in the 4-R-position, chelate formation in the 3-benzothiazol-2-yl-2-pyrazoline moiety, and electrophotochemical detection. Furthermore, the rigid "pseudo spiro" geometry of the molecules, which holds the three substituents of the central 2-pyrazoline ring in a fixed prearrangement, was confirmed by X-ray structure analysis. KW - Farbstoff KW - Fluoreszenz KW - Kationen KW - Photophysik PY - 2000 DO - https://doi.org/10.1021/jp993404q SN - 1089-5639 SN - 1520-5215 VL - 104 IS - 26 SP - 6171 EP - 6188 PB - Soc. CY - Washington, DC AN - OPUS4-841 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pfennig, Anja A1 - Schulz, S. A1 - Werlitz, T. A1 - Bülow, E. A1 - Wetzlich, S. A1 - Tietböhl, J. A1 - Frieslich, C. A1 - Kranzmann, Axel T1 - Influence of heat treatment on the corrosion of steels in CCS environment N2 - To predict the reliability and safety during the injection of compressed emission gasses - mainly containing CO2 - into deep geologica! layers (CCS-technoIogy, Carbon Capture and Storage), the influence of heat treatment on pit corrosion needs to be considered. In laboratory Experiments different heat treated steeis used as injection pipe with 13% Chromium and 0.46% Carbon (X46CrI3, 1.4034) and 0.2% Carbon (X20Crl3. 1.4021) as well as 16% Chromium Steel XöCrNiCuNb 16-4 (1.4542) were tested. The samples were exposed up to 1 year to the distinct synthetic aquifer environment saturated with technical CO2 at a flow rate of 3 l/h. The corrosion rate generally does not exceed 0.03 mm/year. Pits with maximum pit heights around 300 µm were obtained for hardened X20Crl3 with martensitic microstructure. The least amount of pits is found on X46Crl3. The higher carbon content in, X46Crl3 (0.46% C), results in a lower amount ofpits compared to X20Crl3 (0.20%). T2 - TMS 2012 - 141st Annual Meeting & Exhibition CY - Orlando, FL, USA DA - 11.03.2012 KW - CCS KW - Carbon capture and storage KW - Corrosion KW - Steel KW - Pipeline KW - Carbon KW - Heat treatment KW - CO2-storage PY - 2012 SN - 978-1-11829-607-3 VL - 1 IS - Supplemental Proceedings SP - 103 EP - 110 PB - John Wiley & Sons CY - Hoboken, NJ, USA AN - OPUS4-28007 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schulz, T. A1 - Reimann, T. A1 - Bochmann, A. A1 - Vogel, A. A1 - Capraro, B. A1 - Mieller, Björn A1 - Teichert, S. A1 - Töpfer, J. T1 - Sintering behavior, microstructure and thermoelectric properties of calcium cobaltite thickfilms for transversal thermoelectric multilayer generators N2 - The sintering behavior and the thermoelectric performance of Ca3Co4O9 multilayer laminates were studied, and a multilayer thermoelectric generator was fabricated. Compacts and multilayer samples with anisotropic microstructure and residual porosity were obtained after conventional sintering at 920 °C, whereas dense and isotropic multilayer samples were prepared by firing at 1200 °C and reoxidation at 900 °C. A hot-pressed sample has a dense and anisotropic microstructure. Samples sintered at 920 °C exhibit low electrical conductivity due to the low density, whereas the Seebeck coefficient is not sensitive to preparation conditions. However, thermal conductivity of multilayers is very low, and, hence acceptable ZT values are obtained. A ransversal multilayer thermoelectric generator (TMLTEG) was fabricated by stacking layers of Ca3Co4O9 green tapes, AgPd conductor printing, and co-firing at 920 °C. The TMLTEG has a power output of 3 mW at ΔT =200 K in the temperature interval of 25 °C to 300 °C. KW - Thermoelectric oxide KW - Calcium cobaltite KW - Pressure-assisted sintering KW - Multilayer PY - 2018 DO - https://doi.org/10.1016/j.jeurceramsoc.2017.11.017 SN - 0955-2219 SN - 1873-619X VL - 38 IS - 4 SP - 1600 EP - 1607 PB - Elsevier Ltd. AN - OPUS4-43983 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schulz, Ulrich A1 - Geburtig, Anja A1 - Crewdson, M. A1 - Stephenson, J. ED - Reichert, T. T1 - The Southern Florida Acid Rain Test T2 - 2nd European Weathering Symposium - Natural and Artificial Ageing of Polymers CY - Gothenburg, Sweden DA - 2005-06-16 KW - Weathering Reference Materials PY - 2005 SN - 3-9808382-9-3 VL - 6 SP - 49 EP - 62 PB - Gesellschaft für Umweltsimulation CY - Pfinztal AN - OPUS4-10375 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Emmerling, Franziska A1 - Orgzall, I. A1 - Dietzel, B. A1 - Schulz, B. A1 - Larrucea, J. T1 - Ordering the amorphous - Structures in PBD LED materials N2 - The class of 2,5 disubstituted-1,3,4-oxadiazoles containing a biphenyl unit on one side is intensively used as electron transport materials to enhance the performance of organic light emitting diodes (OLEDs). In contrast to the ongoing research on these materials insights in their structure-property relationships are still incomplete. To overcome the structural tentativeness and ambiguities the crystal structures of 2-(4-biphenylyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole, that of the related compound 2-(4-biphenylyl)-5-phenyl-1,3,4-oxadiazole and of 2-(4-biphenylyl)-5-(2,6-dimethylphenyl)-1,3,4-oxadiazole are determined. A comparison with the results of GAUSSIAN03 calculations and similar compounds in the Cambridge Structural Database leads to a profound characterization. KW - OLED KW - PBD KW - Diphenyl-1,3,4-oxadiazole KW - Crystallization PY - 2012 DO - https://doi.org/10.1016/j.molstruc.2012.04.040 SN - 0022-2860 SN - 1872-8014 SN - 0377-046X VL - 1030 SP - 209 EP - 215 PB - Elsevier CY - Amsterdam AN - OPUS4-27264 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Emmerling, Franziska A1 - Bricks, J. L. A1 - Resch-Genger, Ute A1 - Kraus, Werner A1 - Schulz, Burkhard A1 - Li, Yanqin A1 - Reck, Günter T1 - Influence of the donor substituent and acceptor alkylation on the structure-analytical properties of mono- and bifunctional biphenyl-type fluorescent reporters N2 - A systematic structural investigation of R-phenyl-substituted 2,2':6',2"-terpyridines, a family of mono- and bifunctional charge transfer (CT)-operated fluorescent reporters for protons and metal ions, is presented. These molecules are equipped with non-binding and analyte coordinating donor substituents R (R = CF3, H, OMe, OH, DMA, A15C5 equaling monoaza-15-crown-5) of various donor strength and display CT-controlled spectroscopic properties and communication of analyte–receptor interactions. The crystal structures of the neutral fluorescent probes are compared to the structures of their terpyridine-alkylated or -protonated counterparts that represent model systems for acceptor protonation or cation coordination. The aim is here a better understanding of the complexation-induced structural and spectroscopic changes and the identification of common packing motifs of bpb-R thereby taking into account the importance of terpyridine building blocks for the construction of supramolecular systems and coordination arrays revealing π–π interactions. KW - Biphenyl KW - Terpyridine KW - Crystal structure KW - Fluorescent probe KW - Charge transfer KW - Bifunctional PY - 2008 DO - https://doi.org/10.1016/j.molstruc.2007.03.025 SN - 0022-2860 SN - 1872-8014 SN - 0377-046X VL - 874 IS - 1-3 SP - 14 EP - 27 PB - Elsevier CY - Amsterdam AN - OPUS4-17087 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Ralph-Peter A1 - Falkenhagen, Jana A1 - Schulz, Günter A1 - Gloede, J. T1 - Charakterisierung von Calixarenen durch Kopplung von Flüssigchromatographie und MALDI-TOF-MS KW - Flüssigchromatographie KW - Kopplung LACCC KW - MALDI-TOF-MS KW - Calixarene KW - Novolake PY - 2001 SN - 0016-3538 VL - 45 IS - 4 SP - 380 EP - 384 PB - GIT-Verlag CY - Darmstadt AN - OPUS4-2177 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Damm, David A1 - Pinnow, C.J. A1 - Schulz-Forberg, Bernd T1 - Telematik und Gefahrgutsicherheit - Regeln, Gefahrgut - Telematik und Datensicherheit N2 - In einer arbeitsteiligen Wirtschaft erfüllt der Transport eine herausragende Scharnierfunktion. Von der Wirtschaftlichkeit, Zuverlässigkeit und Sicherheit des Transportes hängen vielfältige Arbeitsergebnisse in den unterschiedlichen Prozessen ab. Aus den Bedürfnissen der Wirtschaft ergibt sich i.d.R. ein sogenannter Modal-Split, der die Aufteilung der Wirtschaftsgüter auf die verschiedenen Verkehrsträger Straße, Schiene, Binnenschiff, See und Luft beschreibt. Zuverlässigkeitsangaben und auch Angaben zur Sicherheitslage lassen sich aus den Statistiken herleiten, wie sie z.B. für Deutschland (Statistisches Bundesamt) und Europa (Eurostat) vorliegen. Die Unfallzahlen sind relativ gering, insbesondere aber ist die Tendenz einer stetigen Verringerung der Ereignisse pro Transport zu erkennen. Der Transport gefährlicher Güter ist integrativer Teil des allgemeinen Gütertransportes und demzufolge erfolgen die Transporte mit Gefahrgut auf den gleichen Verkehrswegen ohne nennenswerte Sonderstellungen, abgesehen von Spezialfällen, wie Transporte für die Bundeswehr. Für die Transporte gefährlicher Güter gibt es spezielle Regelungen, die für die verkehrsträgerunabhängigen Bereiche einheitlich von den Vereinten Nationen ausgearbeitet und als sogenannte Modellvorschriften veröffentlicht werden. In einem Rhythmus von zwei Jahren werden diese Modellvorschriften der Vereinten Nationen dem Stand der Technik angepasst, sodass quasi kontinuierlich die Optimierung der Regelsetzung erfolgt. Man kann heute davon ausgehen, dass der materielle Inhalt der Regeln der Vereinten Nationen in den wichtigsten Wirtschaftsregionen der Welt in entsprechenden bindenden Regeln seinen Niederschlag gefunden hat, sodass von einem nahezu einheitlichen Regelwerk für den Transport gefährlicher Güter auf der ganzen Welt ausgegangen werden kann. KW - Gefahrgut KW - Sicherheit KW - Telematik KW - RFID KW - SIGRID PY - 2014 N1 - Serientitel: Gefahrgut für die Praxis – Series title: Gefahrgut für die Praxis SP - Sonderausgabe, 25 EP - 28 PB - Deutscher Bundes-Verlag AN - OPUS4-31536 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Retzko, Iris A1 - Unger, Wolfgang A1 - Gesatzke, Wolfgang A1 - Scholl, A. A1 - Kilcoyne, A. D. A1 - Koprinarov, I. A1 - Ade, H. A1 - Hitchcock, A. P. A1 - Schulz, H. A1 - Scheibe, H.-J. ED - Tamura, L. S. T1 - Spectromicroscopy with inhomogeneous ta - C samples PY - 2003 UR - http://repositories.cdlib.org/lbnl/LBNL-52519/ SP - 1 EP - 3(?) AN - OPUS4-4694 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Retzko, Iris A1 - Unger, Wolfgang A1 - Schulz, H. A1 - Scheibe, H.-J. A1 - Treu, Dieter A1 - Matsubayashi, N. T1 - Analysis of carbon materials by XPS T2 - Materials Week 2002 ; European Congress on Advanced Materials, their Processes and Applications ; 6th International Conference on Joining Ceramics, Glass and Metal CY - Munich, Germany DA - 2002-09-30 PY - 2002 SN - 3-88355-314-X PB - Werkstoff-Informationsges. AN - OPUS4-1734 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -