TY - JOUR A1 - Pavlovic, Mato A1 - Müller, Christina A1 - Ewert, Uwe A1 - Ronneteg, U. A1 - Pitkänen, J. A1 - Boller, C. T1 - Safe product design - the role of the NDT reliability analysis N2 - Im Zuge der Anwendung des Schadens-Toleranz-Prinzips wird ein adäquates zerstörungsfreies Prüfsystem benötigt um strukturelle Integrität sicher zu stellen. Wenn ein zerstörungsfreies Prüfsystem jedoch bis zu den Grenzen der Detektionsfähigkeit beansprucht wird, liefert es keine übereinstimmende Indikationen der Defektentdeckung (Hit/Miss). Deshalb wird dessen Fähigkeit Defekte zu entdecken als Entdeckungswahrscheinlichkeit (POD Probability of Detection) ausgedrückt. In der herkömmlichen 'Signal Response' Signal-Antwort-Zuverlässigkeitsanalyse wird die Entdeckungswahrscheinlichkeit als eine Funktion der Defektgröße angegeben. Die Eignung des Prüfsystems wird durch den Vergleich der Größe des Defektes, der zuverlässig entdeckt wird, mit der des größten zulässigen Defektes, der die strukturelle Integrität nicht gefährdet, verifiziert. Analysen moderner Strukturen zeigen aber, dass auch andere Parameter den Schweregrad des Defektes bzgl. der Integrität der Struktur bestimmen können. Im Rahmen der Multi-Parameter-Zuverlässigkeitsanalyse kann die Entdeckungswahrscheinlichkeit als eine Funktion verschiedener Einflussparameter ausgedrückt werden. Wenn die Eignung des zerstörungsfreien Prüfsystems bestimmt wird, muss die Fähigkeit des Systems Defekte zu entdecken gegenüber dem kritischen Wert genau des Parameters ausgedrückt und geprüft werden, der den Schweregrad des Defektes für die Integrität der Struktur bestimmt. Die Nichterfüllung dieser Forderung kann zur Ablehnung von intakten Teilen oder der Akzeptanz von schlechten Teilen führen. Das Prinzip wird anhand von longitudinalen Ultraschall-Sende-Empfangs-Prüfdaten der Gußeisenmatrix mit oberflächenoffenen, semi-elliptischen, rißartigen Defekten demonstriert. KW - POD KW - TRL-UT PY - 2013 DO - https://doi.org/10.3139/120.110434 SN - 0025-5300 VL - 55 IS - 4 SP - 270 EP - 275 PB - Hanser CY - München AN - OPUS4-28829 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Christina A1 - Bertovic, Marija A1 - Pavlovic, Mato A1 - Kanzler, Daniel A1 - Ewert, Uwe A1 - Pitkänen, J. A1 - Ronneteg, U. T1 - Paradigm shift in the holistic evaluation of the reliability of NDE systems N2 - Das Ziel des Artikels ist es eine Übersicht über neue methodische Ansätze und Verfahren zur Bewertung der Zuverlässigkeit von ZfP-Systemen in Übereinstimmung mit den spezifischen Anforderungen verschiedener industrieller Anwendungen zu geben. Nach einem Überblick über die in den vergangenen Jahrzehnten erreichten Fortschritte, wird der Fokus auf die gegenwärtigen Entwicklungen gerichtet. Für hohe Sicherheitsanforderungen wurde die quantitative Fehlerauffindwahrscheinlichkeit (probability of detection, POD) basierend auf 'hit/miss'- oder 'Signal-Response'-Analysen und die ROC-Analyse (Receiver Operating Characteristics) als typische Werkzeuge entwickelt. Im Rahmen des modularen Modells für die ZfP-Zuverlässigkeit unterscheidet man zwischen den rein physikalisch-technischen Einflussfaktoren, den industriellen Anwendungsfaktoren und den menschlichen Faktoren. Es hilft zum Beispiel zu erkennen, welche dieser Faktoren man in Modellierungsrechnungen bzw. mittels offenen oder Blindversuchen untersuchen kann. Ein neues Paradigma wird für die Betrachtung der POD als eine Funktion der gewählten Systemparameter und somit als Optimierungswerkzeug verwendet, anstelle sie für die endgültige Beurteilung zu nehmen. Zur Handhabung der Zuverlässigkeitsuntersuchung von realen Defekten in einer realistischen Umgebung werden ökonomisch vertretbare, aber dennoch präzise genug arbeitende Methoden, wie der Ansatz von Bayes oder modellbasierte Methoden vorgestellt. Die menschlichen Faktoren sind oft von ausschlaggebender Wichtigkeit für die Gesamtzuverlässigkeit. Hier hilft ein systematischer psychologischer Ansatz die Engpässe und Verbesserungsmöglichkeiten zu finden. KW - Zuverlässigkeit KW - Modulares Modell KW - POD KW - Human factors PY - 2013 DO - https://doi.org/10.3139/120.110433 SN - 0025-5300 VL - 55 IS - 4 SP - 261 EP - 269 PB - Hanser CY - München AN - OPUS4-28831 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kanzler, Daniel A1 - Müller, Christina A1 - Ewert, Uwe A1 - Pitkänen, J. T1 - Einsatz der Bayes'schen Statistik in der Zuverlässigkeitsbestimmung von zerstörungsfreien Prüfsystemen N2 - Die Fehlerauffindwahrscheinlichkeit oder 'Probability of Detection' ist zu einer wichtigen Qualitätskennzahl von zerstörungsfreien Prüfsystemen geworden. Die Einschätzung von nur künstlichen Fehlern ist jedoch als Bewertungsgrundlage meist nicht ausreichend. Die später verwendeten Prüfobjekte mit den real vorkommenden Fehlern sind die zu betrachtende Basis, für die der Endanwender eine gültige Qualitätseinschätzung der angewandten zerstörungsfreien Prüfung fordert. Jedoch ist bei dem Fall, dass die Datenmenge gering ist, auch die Aussage der POD beschränkt. Es muss daher eine Zwischenlösung gefunden werden, in der die Informationen von beiden Prüfungen kombiniert werden. Die Mathematik ermöglicht mit der Bayes'schen Statistik, diese Informationen miteinander zu kombinieren und somit beide Informationen in die Bewertung einfließen zu lassen. Dabei spielt jedoch der Zusammenhang zwischen Signal und Fehlerausprägung eine wichtige Rolle. Praktisch angewendet und erprobt wird diese Vorgehensweise für die Bewertung der zerstörungsfreien Prüfungen der Firma POSIVA, die sich mit dem Bau eines Endlagers für hochradioaktiven Abfall in Finnland beschäftigt. KW - POD KW - RT KW - Bayes'sches updating PY - 2013 DO - https://doi.org/10.3139/120.110432 SN - 0025-5300 VL - 55 IS - 4 SP - 254 EP - 260 PB - Hanser CY - München AN - OPUS4-28832 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bertovic, Marija A1 - Müller, Christina A1 - Kanzler, Daniel A1 - Fahlbruch, B. A1 - Pitkänen, J. A1 - Ronneteg, U. T1 - 'Human factors' bei der Datenauswertung der zerstörungsfreien Prüfung am Beispiel der nuklearen Endlagerung N2 - Für eine ganzheitliche Betrachtung der Sicherheit bei der zerstörungsfreien Prüfung (ZfP) ist es unvermeidlich neben der Technik auch den Prüfer und die Prüforganisation einzubeziehen. Die Prüfung der Unversehrtheit von Endlagerbehältern ist eine eine sicherheitstechnisch wichtige Anwendung. Die Betreiber der geplanten finnischen und schwedischen Endlager, Posiva und SKB, kapseln den radioaktiven Abfall in Kupferkanistern ein und deponieren die Kanister dann in Felsgestein in einer Tiefe von ca. 500m. Die Kanister bestehen aus einem zylinderförmigen Kupfermantel mit einem Deckel und einem Boden, die zusammen die Außenumhüllung ergeben sowie einer Gusseisenmatrix für die Brennstäbe. Alle Komponenten werden auf ihre Dichtheit bzw. strukturelle Unversehrtheit mittels zerstörungsfreier Prüfmethoden geprüft, um sicher zu stellen, dass im Material und in den Schweißnähten keine kritischen Defekte vorhanden sind, die zu Freisetzungen in die Umgebung führen könnten. Vier ZfP Methoden (Ultraschall-, Wirbelstrom- und radiographische Prüfung, und die visuelle Prüfung anhand einer Kamera) werden mechanisiert durchgeführt, die gewonnenen Daten werden von qualifizierten Fachleuten ausgewertet und bieten so die Möglichkeit, dass Fehler entstehen. Das 'Human Factor'- Untersuchungskonzept besteht aus der Identifizierung potenzieller menschlicher Fehler, deren Ursachen und Präventionsmethoden. Mit Hilfe einer abgewandelten FMEA (Failure Modes and Effects Analysis) wurden mögliche Risiken identifiziert, die die Wahrscheinlichkeit für das Auftreten menschlicher Fehler bei der Datenauswertung erhöhen. Einige dieser Risiken sind beispielsweise Verantwortungsdiffusion beim 4-Augen-Prinzip, Übervertrauen in die Technik bei der automatischen Identifikation von Defekten sowie der Aufmerksamkeitsverlust bei dynamischer Bildbetrachtung. Deren Wirkung wird derzeit experimentell überprüft, um Ansatzpunkte für Optimierungen zu ermitteln und damit die Gesamtzuverlässigkeit des Systems zu verbessern. T2 - DGZfP-Jahrestagung 2011 CY - Bremen, Germany DA - 30.05.2011 KW - Human factors KW - UT KW - ET KW - ZfP KW - Nukleare Endlagerung PY - 2011 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-251584 UR - http://jt2011.dgzfp.de/Portals/jt2011/BB/p42-ku~1.pdf SN - 978-3-940283-33-7 IS - DGZfP-BB 127 (P 42) SP - 1 EP - 2 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) AN - OPUS4-25158 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kanzler, Daniel A1 - Müller, Christina A1 - Pitkänen, J. T1 - Konzept für den Einsatz der Bayes'schen Statistik: In der Zuverlässigkeitsbestimmung von zerstörungsfreien Diagnosesystemen - Das Problem zu kleiner experimenteller Datenmengen N2 - Die statistische Qualitätskennzahl 'Probability of Detection (POD)' hängt von der Anzahl der zugrunde liegenden, brauchbaren Ergebnisse ab. Ist die Datenmenge niedrig, so ist auch die Aussage der POD eher beschränkt. Dennoch heißt eine große Zahl von Daten, nicht gleichzeitig, dass die POD für den realen Einsatz in der Produktion genügt. Es muss unterschieden werden, auf welcher Basis – unter welchen konkreten Bedingungen - die Daten erhoben wurden. Als wichtigste Ergebnisse zählen die Messergebnisse aus der Produktion der später verwendeten Prüfobjekte für den konkreten Einsatz. Noch bevor die zerstörungsfreien Prüfmethoden zuverlässig in der Produktion eingesetzt wurde, muss jedoch nachgewiesen werden, dass die real vorkommenden Fehler gefunden werden können. Das bedeutet, zu einem Zeitpunkt, an dem noch nicht ausreichend Daten vorhanden sind. Während für die realistische Prüfung die notwendige Anzahl der verschiedenen Fehler meist nicht erreicht wird, so fehlen bei der Bewertung der künstlichen Fehler wichtige Parameter und Einflussgrößen. Es muss somit eine Zwischenlösung gesucht werden, in der die Informationen von beiden Prüfungen kombiniert werden. Mit der Bayes’schen Statistik ermöglicht die Mathematik diese Informationen miteinander zu kombinieren und somit beide Informationen mit in die Bewertung einfließen zu lassen. Praktisch angewandt und erprobt wird die Vorgehensweise gemeinsam mit der Firma POSIVA, die sich mit dem Bau eines Endlagers für hoch-radioaktiven Abfall in Finnland beschäftigt. Hier wird als eine der technischen Barrieren ein Kupferbehälter für die Aufbewahrung der verbrauchten Brennstäbe genutzt. Dieser Kupferbehälter wird mit mehreren zerstörungsfreien Prüfmethoden geprüft. Anhand von Radiographiedaten wird gezeigt, dass die Aussagekraft der realistischen Fehlerdaten mit Hilfe der künstlichen Referenzfehlerdaten untermauert werden kann. T2 - DGZfP-Jahrestagung 2011 CY - Bremen, Germany DA - 30.05.2011 KW - Bayes'sche Statistik KW - POD KW - Fehlende Datenmenge PY - 2011 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-251598 SN - 978-3-940283-33-7 IS - DGZfP-BB 127 (Mi.3.C.3) SP - 1 EP - 9 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) AN - OPUS4-25159 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina A1 - Bertovic, Marija A1 - Pavlovic, Mato A1 - Kanzler, Daniel A1 - Ewert, Uwe A1 - Pitkänen, J. A1 - Ronneteg, U. T1 - Holistically evaluating the reliability of NDE systems - paradigm shift N2 - New methodologies for evaluating the reliability of NDE systems are discussed in accordance with the specific requirements of industrial application. After a review of the substantive issues from the previous decades, the go forward guidance is concluded. For high safety demands a quantitative probability of detection (POD) created from hit miss experiments or signal response analysis and ROC (Receiver Operating Characteristics) are typically created. The modular model distinguishes between the influence of pure physics and technique, industrial application factors and the human factor and helps to learn what factors are covered by modelling, open or blind trials. A new paradigm is offered to consider the POD or reliability of the system as a function of the configuration of input variables and use it for optimisation rather than for a final judgement. New approaches are considered dealing with real defects in a realistic environment, affordable but precisely like the Bayesian approach or model assisted methods. Among the influencing parameters, the human factor is of high importance. A systematic psychological approach helps to find out where the bottlenecks are and shows possibilities for improvement. T2 - 18th WCNDT - World conference on nondestructive testing CY - Durban, South Africa DA - 2012-04-16 KW - Reliability of NDE KW - POD KW - ROC KW - Modular Model KW - Multiparameter-POD KW - Bayesian Approach KW - Human Factor PY - 2012 SN - 978-0-620-52872-6 SP - 1 EP - 14 (Paper 591) AN - OPUS4-27579 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kanzler, Daniel A1 - Müller, Christina A1 - Pitkänen, J. A1 - Ewert, Uwe T1 - Bayesian approach for the evaluation of the reliability of non-destructive testing methods: combination of data from artificial and real defects N2 - The Probability of Detection (POD) is used to evaluate the detectability of non-destructive testing (NDT) systems. The POD is highly dependent on the amount of available data. The Bayesian approach provides a solution to compute POD-curves in case of a small amount of real defects without losing the necessary information. The result contains the needed information for the computation of POD-curves for real defects with an acceptable amount of information, even for sparse amount of data. In this paper is shown limitations of the Bayesian approach and how it can be applied to NDT. The Bayesian approach is applied in this case to the evaluation of radiographic testing. Bayesian approach is applied to determine POD-curves for the inspection techniques of nuclear fuel disposal canisters. The reason for using Bayesian approach is the high safety demands and also the low amount of real defects due to the high quality of the reliable production techniques. T2 - 18th WCNDT - World conference on nondestructive testing CY - Durban, South Africa DA - 2012-04-16 KW - Reliability KW - Probability of Detection KW - Real defect testing KW - Bayesian statistics KW - Radiographic testing PY - 2012 SN - 978-0-620-52872-6 SP - 1 EP - 6 (Paper 196) AN - OPUS4-27582 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bertovic, Marija A1 - Fahlbruch, B. A1 - Müller, Christina A1 - Pitkänen, J. A1 - Ronneteg, U. A1 - Gaal, Mate A1 - Kanzler, Daniel A1 - Ewert, Uwe A1 - Schombach, D. T1 - Human factors approach to the acquisition and evaluation of NDT data N2 - This paper gives an introduction to the field of human factors with the focus on their influence on the reliability of NDT in the nuclear energy production (in-service inspections) and final storage of highly radioactive nuclear waste. A set of methodological tools has been developed in the scope of three projects, namely: 1) a theoretical model describing potential human factors influencing manual ultrasonic inspection performance during inservice inspections in nuclear power plants; 2) a method for identifying potential human errors during acquisition and evaluation of data gathered with mechanized ultrasonic, radiographic and eddy-current systems, as well as visual testing with a remote camera (Failure Modes and Effects Analysis, FMEA); and 3) use of eye tracking methodology to optimize existing procedures and practices. The experimental results have shown that time pressure, mental workload and experience influence the quality of the inspection performance. Noticeable were influences from the organization of the working schedule, communication, procedures, supervision and demonstration task. Implementing human redundancy in critical tasks, such as defect identification, as well as using an automated aid (software) to help operators in decision making about the existence and size of defects, could lead to other kinds of problems, namely social loafing (excerpting less effort when working on tasks collectively as compared to working alone) and automation bias (uncritical reliance on the proper function of an automated system without recognizing its limitations and the possibilities of automation failure) that might affect the reliability of NDT in an undesired manner. T2 - 18th WCNDT - World conference on nondestructive testing CY - Durban, South Africa DA - 16.04.2012 KW - Human Factors KW - Time Pressure KW - 4-Eye Principle KW - Automation Bias KW - Nuclear Waste Storage KW - In-Service Inspection (ISI) KW - Nuclear Power Plants KW - Eye Tracking KW - Failure Modes and Effects Analysis (FMEA) PY - 2012 SN - 978-0-620-52872-6 SP - 1 EP - 10 (Paper 198) AN - OPUS4-27583 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Christina A1 - Pavlovic, Mato A1 - Takahashi, Kazunori A1 - Ewert, Uwe A1 - Rosenthal, Martina A1 - Brekow, Gerhard A1 - Böhm, R. A1 - Ronneteg, U. A1 - Pitkänen, J. T1 - POD Evaluation of NDE Techniques for Canister-Components for Risk Assessment of Nuclear Waste Encapsulation T2 - 6th International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurised Components CY - Budapest, Hungary DA - 2007-10-08 KW - Zerstörungsfreie Prüfung KW - Zuverlässigkeit KW - POD PY - 2008 SN - 978-92-79-08897-1 DO - https://doi.org/10.2790/1274 SN - 1018-5593 SP - 168 EP - 179 AN - OPUS4-18589 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Christina A1 - Bertovic, Marija A1 - Gaal, Mate A1 - Heidt, Heinrich A1 - Pavlovic, Mato A1 - Rosenthal, Martina A1 - Takahashi, K. A1 - Pitkänen, J. A1 - Ronneteg, U. T1 - Progress in evaluating the reliability of NDE systems - Paradigm shift N2 - The paper will give an overview of new methodology for evaluating the reliability of NDE systems accurately, reliably and efficiently in accordance with the specific requirements of industrial application. After a review of the substantive issues from the previous workshops, the go forward guidance from these interactions is considered. At the beginning of the reliability analysis, the actual safety demands have to be defined in order to fit the investigation to the level of risk when the component would fail. Next, all the essential influencing parameters need to be documented and transferred to an appropriate design of experiments (DOE) to determine the reliability in terms of a qualitative assessment for lower risk or in terms of a quantitative probability of detection (POD) or ROC (Receiver Operating Characteristics) curves for higher safety demands. A new paradigm is offered to consider the POD or reliability of the system as a function of the configuration of input variables and use it for optimisation rather than for a final judgement. An advantage for the end user is also to sample all single PODs to an integral 'Volume POD' of a part. Among the influencing parameters, the human factor is the most important one. A systematic psychological approach shall help to find out where the bottlenecks are but most importantly to provide best possible working conditions for the human inspectors. T2 - 4th European-American workshop on reliability of NDE CY - Berlin, Germany DA - 2009-06-24 KW - Zuverlässigkeit von ZfP-Systemen KW - Multiparameter POD PY - 2009 UR - http://www.ndt.net/article/reliability2009/Inhalt/we1a2.pdf SN - 978-3-940283-17-7 IS - DGZfP-BB 116 SP - 1 EP - 13 AN - OPUS4-20616 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Takahashi, K. A1 - Pavlovic, Mato A1 - Ronneteg, U. A1 - Pitkänen, J. A1 - Müller, Christina T1 - Probability of detection from C-scan data for reliability analysis of ultrasonic non-destructive testing T2 - 4th European-American workshop on reliability of NDE CY - Berlin, Germany DA - 2009-06-24 KW - POD KW - UT KW - Reliability KW - C-scan PY - 2009 SN - 978-3-940283-17-7 IS - DGZfP-BB 116 SP - 1 EP - 7 AN - OPUS4-20617 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pavlovic, Mato A1 - Takahashi, K. A1 - Ronneteg, U. A1 - Pitkänen, J. A1 - Müller, Christina T1 - Multi-parameter influence on the response of the flaw to the phased array ultrasonic NDT system. The volume POD. T2 - 4th European-American workshop on reliability of NDE CY - Berlin, Germany DA - 2009-06-24 KW - POD KW - Reliability KW - Multi-parameter signal response PY - 2009 SN - 978-3-940283-17-7 IS - DGZfP-BB 116 SP - 1 EP - 6 AN - OPUS4-20618 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina A1 - Pavlovic, Mato A1 - Bertovic, Marija A1 - Gaal, Mate A1 - Heidt, Heinrich A1 - Rosenthal, Martina A1 - Takahashi, K. A1 - Pitkänen, J. A1 - Ronneteg, U. T1 - Fortschritte bei der Bewertung der Zuverlässigkeit von ZfP-Systemen N2 - Es werden die Fortschritte bei der Bewertung der Zuverlässigkeit von ZfP-Systemen in den vergangenen 10 Jahren vorgestellt. Der modulare Ansatz bzw. die systematische Auflistung aller wesentlichen Einflussfaktoren stehen am Anfang jeder Bewertung, die jeweils spezifisch für einen industriellen bzw. Feldeinsatz angelegt wird. Weiterhin legt die zu Grunde liegende Sicherheitsanforderung fest, ob ein exaktes quantitatives statistisches Ergebnis z. B. für die Fehlergröße, die mit hoher Sicherheit detektiert wird angestrebt wird oder ob man sich mit einer qualitativen Abschätzung zufrieden geben kann. Moderne Werkzeuge wie das 'Design of Experiments' (Statistische Versuchsplanung), die Volumen-POD für ein Bauteil als ganzes oder auch die systematische psychologische Betrachtung des menschlichen Faktors unterstützen die Treffsicherheit der Untersuchung für den gewünschten Einsatzfall. Die Ergebnisse der ZfP-Prüfungen können immer nur so gut sein, wie der Mensch mit den Bedingungen zurechtkommt. Weiterhin kann die POD im Zusammenhang mit den Prozessparametern als helfendes Optimierungswerkzeug eingesetzt werden und nicht als endgültige Be(Ver)urteilung. Es werden Beispiele aus Bereichen der Energieerzeugung und Endlagerung präsentiert. T2 - DGZfP-Jahrestagung 2009 CY - Münster, Deutschland DA - 2009-05-18 KW - POD KW - ROC KW - Paradigmenshift KW - Optimierung KW - Human factor PY - 2009 UR - http://www.ndt.net/article/dgzfp2009/Inhalt/mo3c2.pdf SN - 978-3-940283-16-0 IS - DGZfP-BB 115 (Mo.3.C.2) SP - 1 EP - 9 AN - OPUS4-20619 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pitkänen, J. A1 - Salonen, T. A1 - Bertovic, Marija A1 - Müller, Christina A1 - Pavlovic, Mato T1 - NDT reliability in risk minimization during manufacturing and welding of spent nuclear fuel disposal components - a realistic tool for reliable inspections T2 - 4th European-American workshop on reliability of NDE CY - Berlin, Germany DA - 2009-06-24 KW - NDT reliability KW - Spent nuclear fuel KW - EB-weld PY - 2009 UR - http://www.ndt.net/article/reliability2009/Inhalt/fr1a2.pdf IS - Fr.1.A.2 SP - 1 EP - 21 AN - OPUS4-26082 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pitkänen, J. A1 - Brekow, Gerhard A1 - Lipponen, A. A1 - Raiko, H A1 - Brackrock, Daniel T1 - Defect sizing using PA-ultrasonic testing and acceptance in copper lids, tubes and welds for disposal canister T2 - 10th International Conference on Non Destructive Evaluation in relation to structural Integrity for nuclear and pressurized components CY - Cannes, France DA - 2013-10-01 PY - 2013 AN - OPUS4-29207 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kanzler, Daniel A1 - Müller, Christina A1 - Pitkänen, J. T1 - Evaluation of radiographic testing performance with an advanced POD approach N2 - POD is the most often used approach for the evaluation of the reliability of non-destructive testing methods in critical areas. But especially for those cases the requirements for a sufficient amount of data, adequate type of defects and the statistical requirements are high. The claim for checking these requirements is not new, but never the less often ignored. Especially the large amount of data for critical real defects seems too often to be not really solvable. In this presentation we show an approach to use real defect data with knowledge from former testing results with the same equipment, in a useful adequate way. Furthermore we introduce a method to evaluate the real defect description parameters for the radiographic testing. This approach was used for a joint project with the company POSIVA, which is building a final depository for spent nuclear fuel in Finland. Radiographic testing is one of the NDT-methods they use to test the electron beam weld of the copper canister. The copper canister will be used in the deposit as a corrosion barrier within the deposit concept. Through the high sophisticated manufacturing methods of the canister there are almost no material defects, which could be used for reliability evaluation. In this context the idea of Bayesian Updating of the POD with real defect data with former results from artificial defect data was born to get a useful evaluation. T2 - 5th European-American workshop on reliability of NDE CY - Berlin, Germany DA - 07.10.2013 PY - 2013 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-312641 SN - 978-3-940283-53-5 IS - DGZfP-BB 144 SP - Lecture 4, 1 EP - 7 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) CY - Berlin AN - OPUS4-31264 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina A1 - Bertovic, Marija A1 - Holstein, R. A1 - Kanzler, Daniel A1 - Pitkänen, J. A1 - Ronneteg, U. A1 - Heckel, Thomas T1 - A plenary view on the vigour of our NDE reliability models N2 - Using the Modular Reliability Model the three different main influencing elements, i.e. intrinsic capability (IC), application parameters (AP) and the human factors (HF), are, in the first instance, investigated separately. The intrinsic capability stands for the pure physical-technological process of the signal detection caused by the waves or the rays from a material defect in the presence of noise (driven by the material and the devices). This intrinsic capability is the upper bound of the possible reliability. Already when measuring this intrinsic capability for thick walled components the original one-parameter POD must be extended to a multiparameter POD, where, in addition to the defect size, a number of additional physical parameters, such as the grain size distribution (or attenuation), defect depth, and angle or surface roughness, must be considered. For real life cycle assessments it is necessary to evaluate the signal response from real defects. The industrial application factors, e.g. coupling conditions, limited accessibility, heat and environmental vibrations, diminish the reliability. The amount of reduction can be determined quantitatively, if the underlying conditions are controlled. In case they are not controlled it is necessary to count for a fluctuation in the reliability in the field anyway. The third group of important influencing factors are the human factors, which do not only cover the individual performance capability of the inspectors but also the design of the working place,the procedure, the teamwork quality, interaction with systems, the organization, and finally, the relationship between the companies involved in the inspection process and to which extend the responsible parties are aware of it. When comparing an “ideal inspection” with a “real inspection” it is worth while to look how the existing practices, rules and standards support reliable testing and where the “delta” is. In the context of vigor, with respect to the industrial end user, it needs to be shown how the level of reliability of NDE, influenced by the different factors, has an impact on acceptance or rejection of safety critical parts. T2 - 5th European-American workshop on reliability of NDE CY - Berlin, Germany DA - 07.10.2013 PY - 2013 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-312658 SN - 978-3-940283-53-5 IS - DGZfP-BB 144 SP - Lecture 2, 1 EP - 18 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) CY - Berlin AN - OPUS4-31265 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pitkänen, J. A1 - Bertovic, Marija A1 - Brackrock, Daniel A1 - Brekow, Gerhard A1 - Ewert, Uwe A1 - Kanzler, Daniel A1 - Müller, Christina T1 - Reliable evaluation of the acceptability of the weld for final disposal based on the canister copper weld inspection using different NDT methods T2 - 5th European-American workshop on reliability of NDE CY - Berlin, Germany DA - 2013-10-07 PY - 2013 SN - 978-3-940283-53-5 IS - DGZfP-BB 144 SP - Lecture 37, 1 EP - 13 CY - Berlin AN - OPUS4-31267 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bertovic, Marija A1 - Müller, Christina A1 - Fahlbruch, B. A1 - Ronneteg, U. A1 - Pitkänen, J. T1 - Holistic risk assessment and risk prevention approach to the mechanized NDT and the inspection procedure T2 - 5th European-American workshop on reliability of NDE CY - Berlin, Germany DA - 2013-10-07 PY - 2013 SN - 978-3-940283-53-5 IS - DGZfP-BB 144 SP - Lecture 20, 1 EP - 10 CY - Berlin AN - OPUS4-31270 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pitkänen, J. A1 - Bertovic, Marija A1 - Brackrock, Daniel A1 - Brekow, Gerhard A1 - Ewert, Uwe A1 - Kanzler, Daniel A1 - Müller, Christina T1 - Reliable evaluation of acceptability of weld for final disposal based on the canister copper weld inspection using different NDT methods N2 - The inspection of the sealing weld is an important phase for the evaluation of the acceptability of final disposal canister, but the weld is only a part of the 3D shielding of copper shell. The main tasks for reliable NDT evaluation requires an extensive evaluation of the parameters – which contains typical inspection related items like repeatability, S/N ratio, POD, setting up the equipment for inspection, and all practices for inspections. The other parameters are material parameters, their variation must be taken into account in the evaluation of NDT reliability. Further parameters include human factors, i. e. human inspectors and their interaction with technical systems; their effects were studied on an example of the evaluation of eddy current data. Final parameters are related to evaluation of detected defects, which means sizing and base for acceptance and this can be done in different ways. Some examples are given and results are compared with different methods for instance between radiographic testing and ultrasonic testing by raw data analysis and PA-SAFT results. Also, preliminary curves for the evaluation of metallographic results of 55 defects will be shown by EB weld measurements. Some practical items concerning copper inspections will be also discussed related to acceptability. N2 - Die Prüfung der Verschlussschweißnaht ist eine wichtige Phase in der Akzeptanzbewertung der Endlagerungskanister, obwohl die Verschlussschweißnaht nur ein Teil der dreidimensionalen Bedeckung der Kupfereinhüllung ist. Die Hauptaufgabe für die sichere zerstörungsfreie Prüfung (ZfP) erfordert eine umfangreiche Bewertung der Prüfparameter, die die typischen Prüfeinzelheiten, wie z. B. Wiederholbarkeit, Signal-Rausch-Verhältnis, POD, Einstellung der Geräte und alle Prüfvorgehen enthalten. Weitere Parameter sind die Schwankungen von Materialeigenschaften, die berücksichtigt werden müssen. Andere Parameter sind menschliche Faktoren, wie z. B. die Prüfer, und deren Interaktion mit den technischen Systemen, beispielsweise bei der Bewertung der Wirbelstromdaten. Weitere Einflussgrößen auf die Prüfung entstehen bei der Bewertung gefundener Fehler, bei der Größenbestimmung von Fehlern und basierend auf der strukturellen Integrität bei der Akzeptanz von definierten Fehlergrößen/Fehlerarten an verschiedenen Positionen in der Schweißnaht. Der Artikel zeigt einige Beispiele und den Vergleich zwischen verschiedenen ZfP-Methoden, z. B. der radiographische Prüfung, der Ultraschallprüfung mit Bewertung von Rohdaten und der Ultraschallprüfung mit Bewertung mittels PA-SAFT. Auch die vorläufigen Kurven für die metallographische Bewertung von 55 Fehlern der Elektronenstrahlschweißung sind gezeigt. Darüber hinaus wird auch eine praktische Vorgehensweise bei der Definition der Akzeptanzkriterien für die Kupferschweißnahtsprüfung diskutiert. KW - NDT reliability KW - Radiography KW - Ultrasonic testing KW - Eddy current testing KW - Visual testing PY - 2014 UR - http://www.hanser-elibrary.com/doi/pdf/10.3139/120.110609 DO - https://doi.org/10.3139/120.110609 SN - 0025-5300 VL - 56 IS - 9 SP - 748 EP - 757 PB - Hanser CY - München AN - OPUS4-31524 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pavlovic, Mato A1 - Boehm, Rainer A1 - Müller, Christina A1 - Pitkänen, J. A1 - Ronneteg, U. T1 - Investigation of the influence of the material attenuation on the POD of the flaws T2 - 8th International conference on NDE in relation to structural integrity for nuclear and pressurised components CY - Berlin, Germany DA - 2010-09-29 KW - POD KW - NDT KW - Attenuation KW - Ultrasonic KW - Reliability PY - 2010 SN - 978-3-940283-30-6 IS - DGZfP-BB 125 (Th.2.B.2) SP - 1 EP - 9 CY - Berlin AN - OPUS4-23922 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina A1 - Bertovic, Marija A1 - Pavlovic, Mato A1 - Kanzler, Daniel A1 - Rosenthal, Martina A1 - Pitkänen, J. A1 - Ronneteg, U. T1 - Progress in evaluating the reliability of NDE systems - paradigm shift N2 - The paper will give an overview of new methodology for evaluating the reliability of NDE systems accurately, reliably and efficiently in accordance with the specific requirements of industrial application. After a review of the substantive issues from the previous workshops, the go forward guidance from these interactions is considered. At the beginning of the reliability analysis, the actual safety demands have to be defined in order to fit the investigation to the level of risk when the component would fail. Next, all the essential influencing parameters need to be documented and transferred to an appropriate design of experiments (DOE) to determine the reliability in terms of a qualitative assessment for lower risk or in terms of a quantitative probability of detection (POD) or ROC (Receiver Operating Characteristics) curves for higher safety demands. A new paradigm is offered to consider the POD or reliability of the system as a function of the configuration of input variables and use it for optimisation rather than for a final judgement. An advantage for the end user is also to sample all single PODs to an integral 'Volume POD' of a part. Among the influencing parameters, the human factor is the most important one. A systematic psychological approach shall help to find out where the bottlenecks are but most importantly to provide best possible working conditions for the human inspectors. T2 - 8th International conference on NDE in relation to structural integrity for nuclear and pressurised components CY - Berlin, Germany DA - 2010-09-29 KW - Reliability KW - POD KW - ROC KW - Safety PY - 2010 SN - 978-3-940283-30-6 IS - DGZfP-BB 125 (Th.3.A.4) SP - 1 EP - 10 CY - Berlin AN - OPUS4-23923 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kanzler, Daniel A1 - Milsch, Steffen A1 - Pavlovic, Mato A1 - Müller, Christina A1 - Pitkänen, J. T1 - Concept of total reliability of NDT methods for inspection of the EB weld of the copper canister used for a long-term storage of spent nuclear fuel T2 - 8th International conference on NDE in relation to structural integrity for nuclear and pressurised components CY - Berlin, Germany DA - 2010-09-29 KW - POD KW - Ultrasonic testing KW - Radiographic testing KW - Eddy current testing PY - 2010 SN - 978-3-940283-30-6 IS - DGZfP-BB 125 (Th.3.A.5) SP - 1 EP - 6 CY - Berlin AN - OPUS4-23924 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bertovic, Marija A1 - Müller, Christina A1 - Fahlbruch, B. A1 - Pitkänen, J. A1 - Ronneteg, U. T1 - Human factors approach to the reliability of NDT in nuclear waste management in Sweden and Finland N2 - Nuclear power industry has the responsibility to manage and dispose of all radioactive waste from its plants. Finnish Posiva and Swedish SKB are leading in the world in the development of disposal of spent nuclear fuel. Their method consists of encapsulating spent nuclear fuel in copper canisters and depositing them in the bedrock at a depth of about 500 meters for the next 100 000 years, leaving the radioactivity to decrease naturally through the decay of the radioisotopes in it. The copper canisters, consisting of a copper tube, a lid and a bottom (which make the outer shell) and an insert made of a cast iron, need to be inspected for their structural integrity to ensure no critical defects are present in the materials and welds that could lead to a leakage of the waste into the environment. Data acquired by 4 different non-destructive testing (NDT) methods (i.e. UT, ET, RT and VT with a remote camera) are evaluated by skilled human operators and therefore could be subject to human error. Human Factors approach lies in identifying potential errors made by the human, their causes and ways of preventing them. A customized Failure Modes and Effects Analysis (FMEA) was conducted to anticipate possible human failures during the data evaluation. The results led to designing several experiments (e.g. diffusion of responsibility within the 4-eye principle, over trust in automated systems) which are being experimentally tested in ongoing projects. The results are expected to lead to the optimization of the procedures followed by the NDT operators and consequently to the improvement of the overall NDT reliability. T2 - 8th International conference on NDE in relation to structural integrity for nuclear and pressurised components CY - Berlin, Germany DA - 2010-09-29 KW - Human factors KW - Reliability KW - NDT KW - Nuclear waste PY - 2010 UR - http://www.ndt.net/article/jrc-nde2010/papers/32.pdf SN - 978-3-940283-30-6 IS - DGZfP-BB 125 (Th.3.A.2) SP - 1 EP - 10 CY - Berlin AN - OPUS4-23925 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Kanzler, Daniel A1 - Müller, Christina A1 - Pitkänen, J. T1 - Probability of defect detection of Posiva's electron beam weld N2 - The report 'Probability of Defect Detection of Posiva's electron beam weld' describes POD curves of four NDT methods radiographic testing, ultrasonic testing, eddy current testing and visual testing. POD-curves are based on the artificial defects in reference blocks. The results are devoted to the demonstration of suitability of the methods for EB weld testing. Report describes methodology and procedure applied by BAM. Report creates a link from the assessment of the reliability and inspection performance to the risk assessment process of the canister final disposal project. Report ensures the confirmation of the basic quality of the NDT methods and their capability to describe the quality of the EB-weld. The probability of detection curves are determined based on the MIL-1823 standard and it's reliability guidelines. The MIL-1823 standard was developed for the determination of integrity of gas turbine engines for the US military. In the POD-process there are determined as a key parameter for the defect detectability the a90/95 magnitudes, i.e. the size measure a of the defect, for which the lower 95 % confidence band crosses the 90 % POD level. By this way can be confirmed that defects with a size of a90/95 will be detected with 90 % probability. In case the experiment will be repeated 5 % might fall outside this confidence limit. KW - Probability of detection curves KW - POD-curves KW - NDT-methods KW - EB-welding KW - Ultrasonic inspection KW - Radiographic inspection KW - Eddy current inspection KW - Visual inspection PY - 2013 UR - http://www.posiva.fi/en/databank/working_reports/probability_of_defect_detection_of_posiva_s_electron_beam_weld.1874.xhtml?xm_col_report_year=2013&xm_col_language=3&xm_col_type=5&cd_order=col_report_number&cd_offset=0#.VJAIY3uj_mc UR - http://www.posiva.fi/files/3527/WR_2013-70.pdf SP - 1 EP - 86 AN - OPUS4-32512 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -