TY - JOUR A1 - Bandi, V.G. A1 - Luciano, M.P. A1 - Saccomano, M. A1 - Patel, N.L. A1 - Bischof, Th. S. A1 - Lingg, J.G.P. A1 - Tsrunchev, P.T. A1 - Nix, M.N. A1 - Ruehle, Bastian A1 - Sanders, C. A1 - Riffle, L. A1 - Robinson, C.M. A1 - Difilippantonio, S. A1 - Kalen, J.D. A1 - Resch-Genger, Ute A1 - Ivanic, J. A1 - Bruns, O.T. A1 - Schnermann, M. T1 - Targeted multicolor in vivo imaging over 1,000 nm enabled by nonamethine cyanines N2 - Recent progress has shown that using wavelengths between 1,000 and 2,000 nm, referred to as the shortwave-infrared or near-infrared (NIR)-II range, can enable high-resolution in vivo imaging at depths not possible with conventional optical wavelengths. However, few bioconjugatable probes of the type that have proven invaluable for multiplexed imaging in the visible and NIR range are available for imaging these wavelengths. Using rational design, we have generated persulfonated indocyanine dyes with absorbance maxima at 872 and 1,072 nm through catechol-ring and aryl-ring fusion, respectively, onto the nonamethine scaffold. Multiplexed two-color and three-color in vivo imaging using monoclonal antibody and dextran conjugates in several tumor models illustrate the benefits of concurrent labeling of the tumor and healthy surrounding tissue and lymphatics. These efforts are enabled by complementary advances in a custom-built NIR/shortwave-infrared imaging setup and software package for multicolor real-time imaging. KW - Photoluminescence KW - Fluorescence KW - Dye KW - Cyanine KW - Antibody KW - Bioconjugate KW - Conjugate KW - Quantum yield KW - Photophysics KW - Lifetime KW - Sensor KW - NIR KW - SWIR KW - Mechanism KW - Imaging KW - Application KW - Contrast agent KW - Bioimaging PY - 2021 DO - https://doi.org/10.1038/s41592-022-01394-6 VL - 19 IS - 3 SP - 353 EP - 358 PB - Nature Research AN - OPUS4-54465 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eiby, Simon H. J. A1 - Tobler, Dominique J. A1 - Voigt, Laura A1 - van Genuchten, Case M. A1 - Bruns, Stefan A1 - Jensen, Kirsten M. Ø. A1 - Stawski, Tomasz M. A1 - Wirth, Richard A1 - Benning, Liane G. A1 - Stipp, S. L. S. A1 - Dideriksen, Knud T1 - Topotactic Redox-Catalyzed Transformation of Iron Oxides N2 - Fe oxides frequently exist in systems containing both Fe(II) and Fe(III), where their reactivity is enhanced and where interfacial electron transfer from Fe(II) adsorbed to the solids causes the transformation of metastable Fe oxides. Here, we contribute to the understanding of such a transformation using green rust sulfate (GR) synthesized in the presence or absence of Si or Al as the starting material. X-ray diffraction (XRD) and pair distribution function (PDF) analyses showed that (i) rapid oxidation by Cr(VI) caused transformation to Fe oxyhydroxide with short-range ordering, with a pattern identical to that reported for the oxidation of isolated GR hydroxide sheets (i.e., a trilayer of Fe with both edge- and corner-sharing polyhedra) and (ii) goethite formed at the expense of the short-range-ordered Fe oxyhydroxide when residual Fe(II) was present, particularly when Si was absent. This is consistent with the Fe(II)-catalyzed transformation of the short-range-ordered Fe oxyhydroxide. High-resolution transmission electron microscopy (TEM) showed that the two oxidation products coexisted within individual particles and that particle shape and the crystallographic orientation of both products were inherited from the original GR crystals, i.e., they had formed through topotactic transformation. We interpret that the structural reorganization to goethite occurred either in response to distortions caused by polaron movement or as a result of electron transfer reactions occurring at internal surfaces. Once nucleated, goethite growth can be sustained by dissolution–reprecipitation. KW - Iron oxide KW - Electron microscopy KW - Pair distribution funvtion KW - Total scattering PY - 2025 DO - https://doi.org/10.1021/acsearthspacechem.5c00220 SN - 2472-3452 SP - 1 EP - 12 PB - American Chemical Society (ACS) AN - OPUS4-64924 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vlajića, M. A1 - Unger, Wolfgang A1 - Bruns, J. A1 - Rueck-Braun, K. T1 - Photoswitching of fulgimides in different environments on silicon surfaces N2 - Reversible light-modulation of fulgimide based monolayers on Si(1 1 1) and Si(1 0 0) was investigated using ATR-FTIR spectroscopy. Fulgimide monolayers were prepared from neat COOH-terminated SAMs on Si(1 1 1) obtained from methyl undec-10-enoate, (1:1)-diluted COOH-terminated monolayers on Si(1 1 1), and GPTMS monolayers on Si(1 0 0). The epoxy-terminated monolayer on oxidized Si(1 0 0) was characterized with ellipsometry, XPS, as well as contact angle measurements, and ATR-FTIR spectroscopy revealed a strong influence of toluene water content on reproducible high-quality monolayer formation. The results of this study show that environmental polarity has a strong influence on fulgimide imide IR band locations and read-out options for the two photostationary states PSS(365 nm), containing E/Z- and C-isomers, and PSS(545 nm), with solely the E/Zisomers. Neat COOH-terminated monolayers on flat Si(1 1 1) have the Advantage of high functional Group concentration, orientation and stability, and an upright arrangement of fulgimide head groups. KW - Surface functionalization KW - Photoswitchable monolayers KW - ATR-FTIR spectroscopy KW - XPS PY - 2019 DO - https://doi.org/10.1016/j.apsusc.2018.09.159 SN - 0169-4332 SN - 1873-5584 VL - 465 SP - 686 EP - 692 PB - Elsevier B.V. AN - OPUS4-46276 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -