TY - CONF A1 - Friedrich, Jörg Florian A1 - Mix, Renate A1 - Kühn, Gerhard A1 - Unger, Wolfgang T1 - Functional groups bearing plasma homo and copolymer layers as adhesion promoters in metal-polymer composites T2 - 10. Neues Dresdner Vakuumtechnisches Kolloquium (NDVaK) CY - Dresden, Germany DA - 2002-10-17 PY - 2002 SP - 6 EP - 15 PB - DTVa CY - Dresden AN - OPUS4-6970 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kühn, Gerhard A1 - Retzko, Iris A1 - Lippitz, Andreas A1 - Unger, Wolfgang A1 - Friedrich, Jörg Florian T1 - Homofunctionalized polymer surfaces formed by selective plasma processes N2 - Several possibilities exist to produce a modified polymer surface with a high density of only one sort of functional group such as: (i) the plasma grafting of unfragmented monomer molecules and their polymerization forms OH, NH2, COOH groups, etc. in concentrations of approximately 25 groups per 100 C atoms; (ii) selective plasma bromination provides 10–25 CBr groups; (iii) the plasma oxidation of polymer surfaces in an O2 plasma followed by the chemical reduction of all O-containing groups to OH groups by diborane, vitride™ (Na complex) or LiAlH4 yields 9–14 OH groups per 100 carbon atoms; and (iv) the grafting of spacers with different endgroups onto OH or CBr groups produces 7–10 spacer molecules/100 C. This work was focused on the formation of thin plasma deposited polymer layers with a maximum of (homo)functional groups and with a minimum of chemical irregularities using the pulsed plasma technique. The monomers were allylalcohol, allylamine, acrylonitrile and acrylic acid. The further intent was to study the interactions of functional groups (OH, COOH, NH2) and deposited metals (Cr, Al, Ti). It was expected that more basic (NH2), weakly basic or neutral (OH) or more acidic (COOH) groups would show different interactions and chemical reactions with metal atoms. KW - Pulsed plasma polymerization KW - Functional groups KW - Long-term stability KW - Polymer-metal composites PY - 2001 DO - https://doi.org/10.1016/S0257-8972(01)01056-8 SN - 0257-8972 VL - 142-144 SP - 494 EP - 500 PB - Elsevier Science CY - Lausanne AN - OPUS4-6971 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Retzko, Iris A1 - Kühn, Gerhard A1 - Unger, Wolfgang A1 - Lippitz, Andreas T1 - Plasma polymers with chemically defined structures in contact with metals N2 - The retention of chemical structure and functional groups during plasma polymerization was investigated. Usually plasma polymer layers, prepared by a continuous wave radio-frequency plasma, are often chemically irregular in their structure and composition. To minimize these irregularities low wattages and the pulsed plasma technique were applied to avoid fragmentations. The first goal was to produce plasma polymers comprising double or triple bonds as precursors for electrically conducting polymers. Acetylene, ethylene, butadiene and polystyrene were used as monomers and deposited as thin polymer films by pulsed plasmas of low wattages. Styrene polymerization was strongly enhanced in the dark phase (plasma off) of a pulsed r.f. plasma caused by the reactivity of the vinyl-type double bond. This could be confirmed by a verification of a rather high chemical regularity of the film sample. The oxygen content of this film measured by X-ray photoelectron spectrometry (XPS) was in situ 0% and after 24 h exposure to air lower than 1%. Additionally, post-plasma oxidations of trapped radicals with air could be suppressed using NO gas as radical quencher. Such quenched plasma polymer layers were completely stable against oxidation for a number of weeks. During the low-wattage pulse plasma polymerization metal atoms were simultaneously or layer by layer evaporated into the growing layer and in situ measured by XPS. These metal atoms are acting as dopants. Here, Li, K, Mg and Cr were used at different concentrations providing electrical conductivity and magnetic properties for the film. KW - Pulsed plasma KW - Plasma polymerization KW - Doping with metal atoms KW - Encapsulation of nanoparticles PY - 2001 DO - https://doi.org/10.1016/S0257-8972(01)01051-9 SN - 0257-8972 VL - 142-144 SP - 460 EP - 467 PB - Elsevier Science CY - Lausanne AN - OPUS4-6972 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Möller, B. A1 - Kühn, Gerhard A1 - Unger, Wolfgang A1 - Krüger, P. T1 - Improvement of adhesion properties of polymers by producing oxyfluorinated surfaces PY - 2001 SN - 0016-4232 VL - 92 IS - 5 SP - 1334 EP - 1444 PB - Leuze CY - Saulgau, Württ. AN - OPUS4-6973 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Retzko, Iris A1 - Friedrich, Jörg Florian A1 - Kühn, Gerhard A1 - Lippitz, Andreas A1 - Unger, Wolfgang T1 - Eine neue Generation von alterungsbeständigen Plasmapolymeren mit definierter chemischer Struktur T2 - 8. Neues Dresdner Vakuumtechnisches Kolloquium (NDVaK) CY - Dresden, Deutschland DA - 2000-10-19 PY - 2000 VL - 8 SP - 110 EP - 114 CY - Dresden AN - OPUS4-6974 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, P. A1 - Knes, R. A1 - Friedrich, Jörg Florian T1 - Surface cleaning by plasma-enhanced desorption of contaminants PY - 1999 SN - 0257-8972 VL - 112 SP - 240 EP - 244 PB - Elsevier Science CY - Lausanne AN - OPUS4-6984 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Koprinarov, Ivaylo A1 - Friedrich, Jörg Florian A1 - Wöll, Ch. T1 - K-Edge Soft X-ray Absorption (NEXAFS) Spectroscopy In Surface Chemical Analysis of Polymers T2 - International Discussion Meeting Advanced Methods of Polymer Characterization: New Developments and Applications in Industry CY - Mainz, Germany DA - 1999-03-15 PY - 1999 SP - P3.53 CY - Mainz AN - OPUS4-6925 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Grytsenko, K. A1 - Grynko, D. A1 - Lozovski, V. A1 - Friedrich, Jörg Florian A1 - Schulze, Rolf-Dieter A1 - Jurga, J. A1 - Convertino, A. A1 - Kotko, A. ED - Jurga, J. T1 - Properties of Au nano-clusters in PTFE film prepared by co-evaporation in a vacuum PY - 2004 SN - 83-7143-232-1 SP - 79 EP - 84 PB - Wydawn. Politechniki Pozna´nskiej CY - Poznan AN - OPUS4-6961 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, P. A1 - Friedrich, Jörg Florian A1 - Meyer-Plath, Asmus T1 - Gezielte chemische Funktionalisierung von porösen Materialien und Bauteilen aus der Mikrosystemtechnik T2 - Workshop Funktionalisierung von Oberflächen für die Biotechnologie CY - Dresden, Deutschland DA - 2003-03-11 PY - 2003 SP - 1(?) EP - 8(?) PB - EFDS CY - Dresden AN - OPUS4-6962 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, P. A1 - Friedrich, Jörg Florian A1 - Meyer-Plath, Asmus T1 - Selective chemical modification of porous materials and films for bio-medical applications T2 - CIP 2003 ; 14th International Colloquium on Plasma Processes CY - Antibes, France DA - 2003-06-30 PY - 2003 SP - 1(?) EP - 4(?) PB - sfv, Sociéte Française du Vide CY - Paris AN - OPUS4-6963 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Geng, Sh. A1 - Friedrich, Jörg Florian A1 - Gähde, J. A1 - Guo, L. T1 - Surface-Enhanced Infrared Absorption (SEIRA) and Its Use in analysis of Plasma-Modified Surface KW - Plasma KW - IR KW - Surface-enhanced infrared absorption (SEIRA) KW - Surface modification PY - 1999 SN - 0021-8995 SN - 1097-4628 VL - 71 SP - 1231 EP - 1237 PB - Wiley InterScience CY - Hoboken, NJ AN - OPUS4-6985 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Friedrich, Jörg Florian A1 - Koprinarov, Ivaylo A1 - Weiss, K. A1 - Wöll, Ch. ED - Mittal, K. T1 - The Application of Near Edge X-ray Absorption Fine Structures (NEXAFS) Spectroscopy and X-ray Photoelectron Spectroscopy (XPS) in Surface Analysis of Chromium-evaporated Polymers and Organic Films PY - 1998 SN - 90-6764-290-8 SP - 147 EP - 168 PB - VSP CY - Utrecht AN - OPUS4-6986 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Koprinarov, Ivaylo A1 - Lippitz, Andreas A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang A1 - Wöll, Ch. T1 - Oxygen plama induced degradation of the surface of poly(styrene), poly(bisphenol-A-carbonate) and poly(ethylene terephthalate) as observed by soft X-ray absorption spectroscopy (NEXAFS) KW - Oxygen DC plasma treatment KW - Plasma degradation KW - X-ray absorption spectroscopy (NEXAFS) PY - 1998 SN - 0032-3861 SN - 1873-2291 VL - 39 IS - 14 SP - 3001 EP - 3009 PB - Springer CY - Berlin AN - OPUS4-6990 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian A1 - Koprinarov, Ivaylo A1 - Giebler, Rainer A1 - Lippitz, Andreas A1 - Unger, Wolfgang T1 - Reactions and Intermediates at the Metal-Polymer Interface - Detected by XPS and NEXAFS Spectroscopy T2 - 4th European Conference on Adhesion (EURADH '98) ; 1st World Congress on Adhesion and Related Phenomena (WCARP) CY - Garmisch-Partenkirchen, Germany DA - 1998-09-06 PY - 1998 SN - 0021-8464 VL - 75 IS - 1 SP - 1.60 EP - 1.62 PB - Gordon & Breach CY - New York, NY AN - OPUS4-6991 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, P. A1 - Friedrich, Jörg Florian ED - Mennig, G. T1 - Modifizierung von Polymeren im Niederdruckplasma T2 - 15. Fachtagung über Verarbeitung und Anwendung von Polymeren CY - Chemnitz, Deutschland DA - 1997-11-13 PY - 1997 SN - 3-00-001942-1 IS - B27 SP - 1 EP - 8 PB - Techn. Univ. CY - Chemnitz AN - OPUS4-6992 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, P. A1 - Wigant, L. A1 - Friedrich, Jörg Florian ED - Nowack, H. T1 - Permeabilitätsverminderung von Polyolefinfilmen durch Plasmapolymerbeschichtungen T2 - 5. Internationale Fachtagung - ND-Plasma-Technologie CY - Duisburg, Deutschland DA - 1997-09-22 PY - 1997 VL - 5 SP - 1(?) EP - 16(?) PB - Print-Service CY - Mülheim AN - OPUS4-6996 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Koprinarov, Ivaylo A1 - Lippitz, Andreas A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang A1 - Wöll, Ch. T1 - Surface analysis of DC oxygen plasma treated or chromium evaporated poly(ethylene terephthalate) foils by soft X-ray absorption spectroscopy (NEXAFS) KW - Biaxially streched poly(ehtylene terephthalate) KW - Oxygen DC plasma treatment KW - Metallization with chromium PY - 1997 SN - 0032-3861 SN - 1873-2291 VL - 38 IS - 8 SP - 2005 EP - 2010 PB - Springer CY - Berlin AN - OPUS4-6998 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Wigant, L. A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Wittrich, H. T1 - Corona, spark and combined UV and ozone modification of polymer films WeBP23 N2 - Different types of plasma, irradiative and chemical activation were compared in terms of surface functionalization. Corona and spark jet plasmas are characterized by low gas temperatures and high rates in surface modification. UV irradiation in the presence of ozone does not involve any particle bombardment and acts only by enhanced photooxidative processes. Although ion implantation can be avoided, this method is not free of radiative damage in both the surface-near region and the bulk of polymers. Furthermore, its functionalization rate is low. In relation to low-pressure O2 plasma modification, all treatments mentioned here have a low efficiency in adhesion promotion due to oxidative degradation of macromolecules and formation of molecular debris known as the ''weak boundary layer''. PY - 1998 DO - https://doi.org/10.1016/S0257-8972(97)00318-6 SN - 0257-8972 VL - 98 IS - 1 SP - 879 EP - 885 PB - Elsevier Science CY - Lausanne AN - OPUS4-7000 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian ED - Scheyrer, P. T1 - Vergleich der Wirksamkeit verschiedener Normal- und Niederdruckplasmen bei der Vorbehandlung von Kunststoffen T2 - Seminar Beschriften und vollflächiges Dekorieren von Kunststoffoberflächen CY - Würzburg, Deutschland DA - 1999-03-30 PY - 1995 SP - 14 Seiten PB - Süddeutsches Kunststoffzentrum CY - Würzburg AN - OPUS4-7002 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian T1 - Plasmabehandlung von Polymeren PY - 1997 SN - 0001-8198 SN - 0943-1454 VL - 41 IS - 1-2 SP - 28 EP - 33 PB - Vieweg CY - Wiesbaden AN - OPUS4-7003 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Kühn, Gerhard A1 - Mix, Renate ED - D'Agostino, R. T1 - Polymer Surface Modification with Monofunctional Groups of Different Type and Density T2 - 16th International Symposium on Plasma Chemistry ; ISPC-16 CY - Taormina, Italy DA - 2003-06-22 PY - 2005 SN - 3-527-40487-2 SP - 3 EP - 21 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-7019 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Wigant, L. A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Erdmann, J. A1 - Gorsler, H.-V. T1 - Oberflächenvorbehandlung von Polypropylen in elektrischen Entladungen PY - 1995 SN - 0590-8450 VL - 1 SP - 123 EP - 127 PB - Verl. Coating Thomas CY - St. Gallen AN - OPUS4-7005 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Wigant, L. A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Wittrich, H. A1 - Prescher, D. ED - Mittal, K. L. T1 - Barrier properties of plasma-modified polypropylene and polyethyleneterephthalate T2 - International Symposium on Polymer Surface Modification: Relevance to Adhesion CY - Las Vegas, NV, USA DA - 1993-11-03 KW - Plasma fluorination of polymers KW - Deposition of fluorine-containing plasma polymers KW - Barrier formation against solvent permeation KW - Permeation mechanism of solvent mixtures PY - 1996 SN - 90-6764-201-0 VL - 1 SP - 121 EP - 136 PB - VSP CY - Utrecht AN - OPUS4-7006 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang A1 - Lippitz, Andreas A1 - Gross, Thomas A1 - Rohrer, P. A1 - Saur, W. A1 - Erdmann, J. A1 - Gorsler, H.-V. ED - Mittal, K. L. T1 - The improvement in adhesion of polyurethane-polypropylene composites by short-time exposure of polypropylene to low and atmospheric pressure plasmas KW - Polyurethane-polypropylene adhesion KW - Low pressure plasma pretreatment KW - Atmospheric pressure plasma treatment KW - Short-time exposure KW - Relevance of functional groups to adhesion KW - Molecular orientation at polymer surfaces PY - 1996 SN - 90-6764-201-0 SP - 49 EP - 72 PB - VSP CY - Utrecht AN - OPUS4-7007 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -