TY - CONF A1 - Friedrich, Jörg Florian T1 - Complex organic thin films for optoelectronics: combined depossition techniques T2 - ECASIA `03 CY - Berlin, Germany DA - 2003-10-06 PY - 2003 AN - OPUS4-4674 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fritz, Andreas A1 - Schönhals, Andreas A1 - Mix, Renate A1 - Kühn, Gerhard A1 - Friedrich, Jörg Florian T1 - Dielectric spectroscopy of plasma copolymers of the system allyl alcohol/alkene N2 - Polymers synthesized with plasma techniques are very interesting materials for electronic, optic, and bio compatible applications. Thin films of plasma polymers shows a good adhesion to metals, glass, or other polymers. But the supramolecular structure, the durability, and the chemical and mechanical behavior of these polymers is poorly understood. Therefore dielectric investigations are carried out to study the dynamic behavior of the plasma polymers. As polymer system allyl alcohol/alkene is chosen to get polymers with a defined concentration of hydroxyl groups. The dielectric investigations shows several relaxation processes and a dependency of the dielectric parameters from the ratio of allyl alcohol in the polymer is observed. This results indicated that the alkene monomers were assembled continuous into the polymer matrix. T2 - Frühjahrstagung des Arbeitskreises Festkörperphysik bei der DPG CY - Regensburg, Deutschland DA - 2002-03-11 PY - 2002 UR - http://old.dpg-tagungen.de/archive/2002/cpp_4.html SN - 0420-0195 SN - 0372-5448 SN - 0343-9216 IS - CPP 4.7 SP - 424 CY - Bad Honnef AN - OPUS4-2057 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fritz, Andreas A1 - Schönhals, Andreas A1 - Mix, Renate A1 - Kühn, Gerhard A1 - Friedrich, Jörg Florian T1 - Dielectric spectroscopy of plasma copolymers or the system allyl alcohol/alkene T2 - Frühjahrstagung des Arbeitskreises Festkörperphysik bei der DPG CY - Regensburg, Germany DA - 2002-03-11 PY - 2002 SN - 0420-0195 SN - 0372-5448 SN - 0343-9216 IS - CPP 4.7 SP - 424 CY - Bad Honnef AN - OPUS4-2058 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gross, Thomas A1 - Retzko, Iris A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang T1 - Time-of-flight-SIMS and XPS characterization of metal doped polymers N2 - Organic thin films with defined chemical structures and physical properties are required for various applications. Plasma polymerization is of technological interest, since the deposition of plasma polymers is possible on any material of any shape in the desired thickness. We report on the TOF-SIMS (TOF: time-of-flight) and XPS investigations of pulse plasma ‘poly(acetylene)’ and alkali metal doped pulse plasma ‘poly(acetylene)’ films. The combination of TOF-SIMS and XPS supplies detailed information on the surface chemistry of these films. Application of both methods provides the possibility for cross-checking certain results. Moreover the different sensitivities of the methods can be utilized. According to the TOF-SIMS and XPS data it can be concluded that the interaction of alkali metals with plasma ‘poly(acetylene)’ results in electrovalent bonds of the type Me?+–C?- between carbon and metal. Furthermore carbon–oxygen–metal interactions were observed. These interactions are of the type C=O?-cdots, three dots, centeredMe?+ and/or C–O?-–Me?+. KW - SIMS KW - TOF-SIMS KW - XPS KW - Plasma KW - Polymer KW - Poly(acetylene) PY - 2003 DO - https://doi.org/10.1016/S0169-4332(02)00769-9 SN - 0169-4332 SN - 1873-5584 VL - 203-204 SP - 575 EP - 579 PB - North-Holland CY - Amsterdam AN - OPUS4-2271 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gajewski, Sven A1 - Maneck, Heinz-Eberhard A1 - Knoll, Uta A1 - Neubert, Dietmar A1 - Dörfel, Ilona A1 - Mach, Reinhard A1 - Strauß, Birgid A1 - Friedrich, Jörg Florian T1 - Purification of single walled carbon nanotubes by thermal gas phase oxidation N2 - Single walled carbon nanotubes (SWNT) have been produced in an electric arc discharge by using a graphite rod as anode which is filled with a powder mixture of graphite and metallic catalysts like nickel and yttrium. The soot material containing approximately a third of SWNT was collected from the cathode region as a soft, voluminous material. The main by-products in this process are amorphous carbon and graphitic nanoparticles which have to be removed by an appropriate purification process. The as-produced soot material was purified by gas phase oxidation in air at 355 °C. The oxidation of amorphous carbon in air is advantageous against wet chemical methods because it is better controllable. Thermogravimetric analysis and electron microscopy were used to investigate the oxidation behavior of the different kinds of carbon. Oxidation of SWNT and amorphous carbon occurs simultaneously even at moderate temperatures, whereas amorphous carbon is more rapidly oxidized than SWNT. For optimizing the purification procedure by gas phase oxidation, kinetic studies were used to determine the oxidation time for each component in the soot at a given temperature. So it is possible to remove the amorphous carbon quantitatively with minimal losses of SWNT. But it was found that graphitic nanoparticles have the highest stability against oxidation and could therefore not be quantitatively removed by this method without the complete destruction of SWNT. Therefore, the electric arc discharge process has to be a controlled process for minimum production of graphitic nanoparticles to obtain a material with a high content of SWNT. KW - Nanotubes KW - Cathodic arc discharge KW - Amorphous carbon KW - Oxidation PY - 2003 DO - https://doi.org/10.1016/S0925-9635(02)00362-X SN - 0925-9635 VL - 12 IS - 3-7 SP - 816 EP - 820 PB - Elsevier CY - New York, NY AN - OPUS4-2516 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Quantitative measuring of C radical sites at polymer surfaces using the derivatization technique and XPS T2 - 10th European Conference on Applications of Surface and Interface Analysis (ECASIA '03) CY - Berlin, Germany DA - 2003-10-06 PY - 2003 AN - OPUS4-3920 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Maßgeschneidete Polymeroberflächen T2 - BAM Kolloquium CY - Berlin, Germany DA - 2003-11-26 PY - 2003 AN - OPUS4-4205 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Grundlagen für neuartige plasmachemische Prozesse zur gezielten und selektiven Polymermodifizierung T2 - VDI-Abschlußtreffen CY - Berlin, Germany DA - 2003-06-30 PY - 2003 AN - OPUS4-4206 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Polymer surface modification with mono-functional groups of different type and density T2 - Institutskolloquium TU Dresden, Institut für Elektroniktechnologie CY - Dresden, Germany DA - 2003-01-29 PY - 2003 AN - OPUS4-4207 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Designing and analytical characterization of polymer surfaces T2 - Institutskolloquium, Ciba Geigy CY - Basel, Switzerland DA - 2003-12-03 PY - 2003 AN - OPUS4-4208 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Functionalization of polymer surfaces using plasmas T2 - Institutskolloquium Universität Stuttgart, Institut für Plasmaforschung CY - Stuttgart, Germany DA - 2003-12-04 PY - 2003 AN - OPUS4-4209 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Polymer surface modification with monofunctional groups of different type and density T2 - ISPC-16 CY - Taormina, Italy DA - 2003-06-22 PY - 2003 AN - OPUS4-4200 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Vergleich plasmaschemische Methoden zur Funktionalisierung von Polymeroberflächen T2 - X. Erfahrungsaustausch zu "Oberflächentechnologie mit Plasmaprozessen" CY - Klingenthal, Germany DA - 2003-03-18 PY - 2003 AN - OPUS4-4203 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Contribution of chemical interactions between the different types of functional groups and metal atoms to the adhesion T2 - ECASIA `03 CY - Berlin, Germany DA - 2003-10-06 PY - 2003 AN - OPUS4-4204 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Kunststoffkorrosion durch Polymerabbau - Früherkennung und zeitraffende Prognose T2 - Thüringer Grenz- und Oberflächentage - Oberflächentechnik für die Praxis CY - Jena, Germany DA - 2005-09-15 PY - 2005 AN - OPUS4-7853 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -